Commit graph

16 commits

Author SHA1 Message Date
Ben Gras
6a73e85ad1 retire _PROTOTYPE
. only good for obsolete K&R support
	. also remove a stray ansi.h and the proto cmd
2012-03-25 16:17:10 +02:00
Ben Gras
a77c2973b3 fix clang warnings -R in kernel/ and servers/ 2011-06-09 16:09:13 +02:00
Tomas Hruby
0ac9b6d4cf SMP - trully idle APs
- any cpu can use smp_schedule() to tell another cpu to reschedule

- if an AP is idle, it turns off timer as there is nothing to
  preempt, no need to wakeup just to go back to sleep again

- if a cpu makes a process runnable on an idle cpu, it must wake it up
  to reschedule
2010-09-15 14:10:57 +00:00
Tomas Hruby
387e1835d1 SMP - BSP halts APs before shutting down 2010-09-15 14:10:54 +00:00
Tomas Hruby
9e12630d75 SMP - APs are fully enabled
- apic_send_ipi() to send inter-processor interrupts (IPIs)

- APIC IPI schedule and halt handlers to signal x-cpu that a cpu shold
  reschedule or halt

- various little changes to let APs run

- no processes are scheduled at the APs and therefore they are idle
  except being interrupted by a timer time to time
2010-09-15 14:10:30 +00:00
Tomas Hruby
62c666566e SMP - We boot APs
- kernel detects CPUs by searching ACPI tables for local apic nodes

- each CPU has its own TSS that points to its own stack. All cpus boot
  on the same boot stack (in sequence) but switch to its private stack
  as soon as they can.

- final booting code in main() placed in bsp_finish_booting() which is
  executed only after the BSP switches to its final stack

- apic functions to send startup interrupts

- assembler functions to handle CPU features not needed for single cpu
  mode like memory barries, HT detection etc.

- new files kernel/smp.[ch], kernel/arch/i386/arch_smp.c and
  kernel/arch/i386/include/arch_smp.h

- 16-bit trampoline code for the APs. It is executed by each AP after
  receiving startup IPIs it brings up the CPUs to 32bit mode and let
  them spin in an infinite loop so they don't do any damage.

- implementation of kernel spinlock

- CONFIG_SMP and CONFIG_MAX_CPUS set by the build system
2010-09-15 14:09:52 +00:00
Tomas Hruby
e6ebac015d APIC mode uses IO APICs
- kernel turns on IO APICs if no_apic is _not_ set or is equal 0

- pci driver must use the acpi driver to setup IRQ routing otherwise
  the system cannot work correctly except systems like KVM that use
  only legacy (E)ISA IRQs 0-15
2010-09-07 07:18:11 +00:00
Kees van Reeuwijk
826b9590f2 More endpoint_t correctness.
More const correctness.
Other code cleanup.
2010-06-08 14:09:18 +00:00
Kees van Reeuwijk
ac14a989b3 Fixed some inconsistent strict typing declarations.
Better strict typing.
2010-05-25 07:23:24 +00:00
Kees van Reeuwijk
d106968d77 Remove useless symbol declarations from headers, make symbols local where possible, add some explicit initialization to global variables. 2010-04-22 07:49:40 +00:00
Kees van Reeuwijk
fa3adedf63 Remove some duplicate declarations in headers.
Explicitly declare some functions as returning void.
2010-04-13 15:22:38 +00:00
Arun Thomas
4ed3a0cf3a Convert kernel over to bsdmake 2010-04-01 22:22:33 +00:00
Kees van Reeuwijk
c33102ea6b Miscellaneous code cleanup. 2010-03-22 20:43:06 +00:00
Tomas Hruby
5efa92f754 NMI watchdog is an awesome feature for debugging locked up kernels.
There is not that much use for it on a single CPU, however, deadlock
between kernel and system task can be delected. Or a runaway loop.

If a kernel gets locked up the timer interrupts don't occure (as all
interrupts are disabled in kernel mode). The only chance is to
interrupt the kernel by a non-maskable interrupt.

This patch generates NMIs using performance counters. It uses the most
widely available performace counters. As the performance counters are 
highly model-specific this patch is not guaranteed to work on every
machine.  Unfortunately this is also true for KVM :-/ On the other
hand adding this feature for other models is not extremely difficult
and the framework makes it hopefully easy enough.

Depending on the frequency of the CPU an NMI is generated at most
about every 0.5s If the cpu's speed is less then 2Ghz it is generated
at most every 1s. In general an NMI is generated much less often as
the performance counter counts down only if the cpu is not idle.
Therefore the overhead of this feature is fairly minimal even if the
load is high.

Uppon detecting that the kernel is locked up the kernel dumps the 
state of the kernel registers and panics.

Local APIC must be enabled for the watchdog to work.

The code is _always_ compiled in, however, it is only enabled if  
watchdog=<non-zero> is set in the boot monitor.

One corner case is serial console debugging. As dumping a lot of stuff
to the serial link may take a lot of time, the watchdog does not 
detect lockups during this time!!! as it would result in too many
false positives. 10 nmi have to be handled before the lockup is
detected. This means something between ~5s to 10s.

Another corner case is that the watchdog is enabled only after the
paging is enabled as it would be pure madness to try to get it right.
2010-01-16 20:53:55 +00:00
Tomas Hruby
8a2a4f97fc Fixed redundant typecast in lapic write/read macros 2010-01-13 18:23:58 +00:00
Tomas Hruby
8a44a44cb9 Local APIC
- local APIC timer used as the source of time

- PIC is still used as the hw interrupt controller as we don't have
  enough info without ACPI or MPS to set up IO APICs

- remapping of APIC when switching paging on, uses the new mechanism
  to tell VM what phys areas to map in kernel's virtual space

- one more step to SMP

based on code by Arun C.
2009-11-16 21:41:44 +00:00