These days, DEV_OPEN calls to character drivers block the calling
thread until completion or failure, and thus never return SUSPEND to
the caller. The same already applied to BDEV_OPEN calls to block
drivers. It has thus become impossible for a process to enter a state
of being blocked on a device open call.
There is currently no support for restarting device open calls to
restarted character drivers. This support was present in the _DOPEN
logic, but was already no longer triggering. In the future, this case
should be handled by the thread performing the open request.
Change-Id: I6cc1e7b4c9ed116c6ce160b315e6e060124dce00
Not doing so caused PFS to commit protocol violations by relying on
stale information when sending replies. This stale information always
happened to be correct, which is why the problem went unnoticed.
Change-Id: Ia42ca670718d6e731193cd2c34a3ff455f8a94d3
- change all sync char drivers into async drivers;
- retire support for the sync protocol in libchardev;
- remove async dev style, as this is now the default;
- remove dev_status from VFS;
- clean up now-unused protocol messages.
Change-Id: I6aacff712292f6b29f2ccd51bc1e7d7003723e87
The async char protocol already has this, so this patch closes the
gap between the two protocols a bit. Support for this flag has been
added to all sync char drivers that support CANCEL at all.
The LOG driver was already using the asynchronous protocol, but it
did not support the nonblocking transfer flag. This has been fixed
as well.
Change-Id: Ia55432c9f102765b59ad3feb45a8bd47a782c93f
As with w_task, this ensures that the field remains cleared if it is
not used. Without this, worker_stop could mistakenly identify a thread
as talking to a device driver rather than a (crashed) file server.
Change-Id: I7d3ebed3efc3cd4f5c891f61c67a6463109b6376
It was always set, but not always cleared, when talking to asynchronous
drivers. This could cause erratic behavior upon a driver crash.
Normally, a worker thread's w_task field is set when it's about to
communicate with a driver or FS. Then upon receiving a reply we can
do sanity checks (that the thread we want to wake up was actually
waiting for a reply). Also, when a driver/FS crashes, we can identify
which worker threads were talking to the crashed endpoint and handle
the error gracefully.
Asynchronous drivers are a bit special, though. In most cases, the
sender of the request is not interested in the reply (the sender was
suspended and only wants to know whether the request was successfully
caried out or not). However, the open request is special, as the reply
carries information needed by the sender. This is the only request
where a worker thread actually yields and waits for the result. This is
also the only case where we're interested in setting w_task for
asynchronous drivers.
Change-Id: Ia1ce2747937df376122b5e13b6a069de27fcc379
* Removed startup code patches in lib/csu regarding kernel to userland
ABI.
* Aligned stack layout on NetBSD stack layout.
* Generate valid stack pointers instead of offsets by taking into account
_minix_kerninfo->kinfo->user_sp.
* Refactored stack generation, by moving part of execve in two
functions {minix_stack_params(), minix_stack_fill()} and using them
in execve(), rs and vm.
* Changed load offset of rtld (ld.so) to:
execi.args.stack_high - execi.args.stack_size - 0xa00000
which is 10MB below the main executable stack.
Change-Id: I839daf3de43321cded44105634102d419cb36cec
The main motivation for this change is that only Loris supports
multithreading, and Loris supports dynamic thread allocation, so the
number of supported threads can be implemented as a bit flag (i.e.,
either 1 or "at least as many as VFS has"). The ABI break obviates the
need to support file system versioning at this time, and several
other aspects are better implemented as flags as well. Other changes:
- replace peek/bpeek test upon mount with FS flag as well;
- mark libsffs as 64-bit file size capable;
- remove old (3.2.1) getdents support.
Change-Id: I313eace9c50ed816656c31cd47d969033d952a03
- pass in file system type through mount(2), and return this type in
statvfs structures as generated by [f]statvfs(2);
- align mount flags field with NetBSD's, splitting out service flags
which are not to be passed to VFS;
- remove limitation of mount ABI to 16-byte labels, so that labels
can be made larger in the future;
- introduce new m11 message union type for mount(2) as side effect.
Change-Id: I88b7710e297e00a5e4582ada5243d3d5c2801fd9
This is a requirement for implementing calls such as getmntinfo(3).
VFS is now responsible for filling in some of the structure's fields.
Change-Id: I0c1fa78019587efefd2949b3be38cd9a7ddc2ced
The following types are modified (old -> new):
* _BSD_USECONDS_T_ int -> unsigned int
* __socklen_t __int32_t -> __uint32_t
* blksize_t uint32_t -> int32_t
* rlim_t uint32_t -> uint64_t
On ARM:
* _BSD_CLOCK_T_ int -> unsigned int
On Intel:
* _BSD_CLOCK_T_ int -> unsigned long
bin/cat is also updated in order to fix warnings.
_BSD_TIMER_T_ has still to be aligned.
Change-Id: I2b4fda024125a19901120546c4e22e443ba5e9d7
The bug in the offset correction code for the 'shrink region from
below' case can easily case an assert(foundregion->offset == offset)
to trigger (if the blocks are touched afterwards, e.g. on fork())
as the offsets become wrong. This commit is a fix & regression test.
Change-Id: I28ed403e3891362a2dea674a49e786d3450d2983
The memory-mapped files implementation (mmap() etc.) is implemented with
the help of the filesystems using the in-VM FS cache. Filesystems tell it
about all cached blocks and their metadata. Metadata is: device offset and,
if any (and known), inode number and in-inode offset. VM can then map in
requested memory-mapped file blocks, and request them if necessary.
A limitation of this system is that filesystem block sizes that are not
a multiple of the VM system (and VM hardware) page size are not possible;
we can't map blocks in partially. (We can copy, but then the benefits of
mapping and sharing the physical pages is gone.) So until before this
commit various pieces of caching code assumed page size multiple
blocksizes. This isn't strictly necessary as long as mmap() needn't be
supported on that FS.
This change allows the in-FS cache code (libminixfs) to allocate any-sized
blocks, and will not interact with the VM cache for non-pagesize-multiple
blocks. In that case it will also signal requestors, by failing 'peek'
requests, that mmap() should not be supported on this FS. VM and VFS
will then gracefully fail all file-mapping mmap() calls, and exec() will
fall back to copying executable blocks instead of mmap()ping executables.
As a result, 3 diagnostics that signal file-mapped mmap()s failing
(hitherto an unusual occurence) are disabled, as ld.so does file-mapped
mmap()s to map in objects it needs. On FSes not supporting it this situation
is legitimate and shouldn't cause so much noise. ld.so will revert to its own
minix-specific allocate+copy style of starting executables if mmap()s fail.
Change-Id: Iecb1c8090f5e0be28da8f5181bb35084eb18f67b
. initial workaround for assert() firing on iovec
size on ARM. likely due to alloc_contig() allocating
unusually mapped memory in STATICINIT.
. for the same reason use the regular cache i/o functions
to read the superblock in mfs - avoid the alloc_contig()
that STATICINIT does.
Change-Id: I3d8dc635b1cf2666e55b0393feae74cc25b8fed4
A printf statement that only gets compiled when DEBUG_SEM is
defined had a '%' conversion without a corresponding argument.
This patch adds the argument.
Change-Id: I808076f7723baad111ab6fe8a0766d1da4904fd7
When we start using a new pagetable (for a new process)
the last part is to ensure the pagetable itself can be
accessed by VM. This is done in pt_bind by updating
the "pagetable of pagetables" and we want this mapping
to match other mappings to the l1 pagetable.
Change-Id: I7b506fd75553917fdc1abd25b55e4b2f25ccbf8d
. turns on mmap() functionality for files by default
. also causes exec() to use it to map in executables
without copying and with sharing those pages with the
disk cache and other instances of the executable
Change-Id: Idb94dfe110eed916cf83b12c45e1a77241a2cee5
As they can come anytime upon receipt of interrupt by the ethernet driver. This
is the same thing as is done for CONF replies.
A simple test case would be the following via ssh connection:
while getaddr; do :; done
Change-Id: I68f4403360b3eefe67fc602c4855ca1abd649475
Previously, PFS would incorrectly try to unsuspend the parent (i.e.,
the listening socket), resulting in the child hanging until the other
side performed another action. Test56 started failing on this now.
Change-Id: I231ac5481c83ac45951d33aeecc8149273f48b11
for clang, fix warnings in drivers/, lib/, servers/, sys/, common/.
by turning off fatal warnings (takes effect if the default is on),
fixing warnings or reducing the warning level.
Change-Id: Ia1b4bc877c879ba783158081b59aa6ebb021a50f
The VM server now manages its call masks such that all user processes
share the same call mask. As a result, an update for the call mask of
any user process will apply to all user processes. This is similar to
the privilege infrastructure employed by the kernel, and may serve as
a template for similar fine-grained restrictions in other servers.
Concretely, this patch fixes the problem of "service edit init" not
applying the given VM call mask to user processes started from RC
scripts during system startup.
In addition, this patch makes RS set a proper VM call mask for each
recovery script it spawns.
Change-Id: I520a30d85a0d3f3502d2b158293a2258825358cf
