. also implement some netbsd-style tty ioctls
. also implement SIGINFO
. also import netbsd stty
. rename keymap minix CMIN (for ctrl+minus on numeric keypad)
to CNMIN; to keep unchanged control character default CMIN in
new <sys/ttydefaults.h>
. convert CS[5678] logic in rs232 driver to explicit setting of LC
bits
Change-Id: I9b7d2963fe9aec00fb6e7535ef565b3191fc1c1d
. add all sys/sys headers not already present to help compiling
. take netbsd dirent.h and struct dirent; main result is
introducing d_type and d_namlen that have to be set by getdents()
in all FS code implementing it
. d_off is gone
. alignment of the struct has become 8 bytes instead of 4
. remove _MAX_BLOCK_SIZE, _MIN_BLOCK_SIZE, _STATIC_BLOCK_SIZE
. libminlib: cleanup unused yet duplicate code
. mfs: throw out the long-broken v1, v2 support
. new test for dirent contents filled by getdents()
Change-Id: I1459755c7ba5e5d1c9396d3a587ce6e63ddc283e
GCC embeddeds in a string the configuration used when building itself,
this patches just updates that string to match the configuration
actually used.
Change-Id: Ife8f61570b94eb17ce5808b5b58cc5e75e9dc64f
* /usr/bin/strip would be replaced by a link, even when compiling
binutils.
* Updated minix-spec.h to use the correct dynamic linker, and removed
the previously used symlinks.
* Removed the patch to the builtin PATH of ld.elf_so.
Change-Id: I4dc8a7fb77a11638f5105a4e15b6c9be5add750e
sysroot support was enabled only for cross versions of the binutils
tools.
This patch also activate it for the native tools which are installed
on the target system.
Change-Id: Ica5de7e20719a63f3b695477b767c30d0a93490c
. 'fixes' warnings that are in these headers, but normally aren't
emited as they're system headers
Change-Id: Ibd20343eae51770cef71116bbda0d9141441ec54
. solution for "warning: visibility attribute not supported in
this configuration"
. needed to make warnings fatal, -Werror
Change-Id: If972300a82df570093f2d89825935483ff69fb18
To do so, a few dependencies have been imported:
* external/bsd/lutok
* external/mit/lua
* external/public-domain/sqlite
* external/public-domain/xz
The Kyua framework is the new generation of ATF (Automated Test
Framework), it is composed of:
* external/bsd/atf
* external/bsd/kyua-atf-compat
* external/bsd/kyua-cli
* external/bsd/kyua-tester
* tests
Kyua/ATF being written in C++, it depends on libstdc++ which is
provided by GCC. As this is not part of the sources, Kyua is only
compiled when the native GCC utils are installed.
To install Kyua do the following:
* In a cross-build enviromnent, add the following to the build.sh
commandline: -V MKBINUTILS=yes -V MKGCCCMDS=yes
WARNING:
At this point the import is still experimental, and not supported
on native builds (a.k.a make build).
Change-Id: I26aee23c5bbd2d64adcb7c1beb98fe0d479d7ada
-By adding MKGCC=yes and MKGCCCMDS=yes on the make commandline
it is now possible to compile and install GCC on the system.
Before doing this, if you are not using the build.sh script,
you will need to call the fetch scripts in order to retrieve
the sources of GCC and its dependencies.
-Reduce difference with NetBSD share/mk
Move Minix-specific parameters from bsd.gcc.mk to bsd.own.mk,
which is anyway patched, so that bsd.gcc.mk is now aligned
on the NetBSD version.
-Clean libraries dependencies, compiles stdc++ only if gcc is
also compiled (it is part of the gcc sources)
-Correct minix.h header sequence, cleanup spec headers.
-Fix cross-compilation from a 32bit host targeting MINIX/arm
Change-Id: I1b234af18eed4ab5675188244e931b2a2b7bd943
- Enable installing binutils from the base system.
- Import texinfo which is required for the binutils tools
to be compiled.
- Also adapted the fetch rules to correctly generate the
gitignore files for gcc, and allow the case of multiple
modules in the same directory, as found in gnu/dist.
Warning: This patch has an entry in docs/UPDATING
Change-Id: Ib781734e8fd7f9c6265fa65d62ba2cf3fccbc5ba
* Added --with-ld=default
* Added --with-lto
* Fixed ld script for ARM
* Options are prepared for future activation of gold.
Change-Id: Id9618904055e18d1b37f5e9585f775c367ff356e
With the addition of utimes(), we can remove the workarounds
and use the original NetBSD code for timestamping files.
Also restore use of -p & -r for install while building
. raise(SIGFPE) for modulo-0/divide-0 operations in
internal int division functions
. gcc: do not link with -lgcc anywhere so these internal
functions are always used from libc instead of (sometimes)
masked by -lgcc
. together fixes test53 on ARM
Change-Id: I31ec19dfdd68b8a92695595da901874e63106f9d
Due to the ABI we are using we have to use the earm architecture
moniker for the build system to behave correctly. This involves
then some headers to move around.
There is also a few related Makefile updates as well as minor
source code corrections.
* Updating common/lib
* Updating lib/csu
* Updating lib/libc
* Updating libexec/ld.elf_so
* Corrected test on __minix in featuretest to actually follow the
meaning of the comment.
* Cleaned up _REENTRANT-related defintions.
* Disabled -D_REENTRANT for libfetch
* Removing some unneeded __NBSD_LIBC defines and tests
Change-Id: Ic1394baef74d11b9f86b312f5ff4bbc3cbf72ce2
* Remade patch so it works with minix patch tool.
* New MINIX tar support -ox, so revert back to it
In fetch scripts, tar had been replaced by bsdtar as the prebvious
tar did not support the -o flag under minix, which is required to
prevent usage of tar file stored user and group information.
This introduces portability problems. As our new tar tool now
support that flag revert back to improve portability.
upgrade to NetBSD CVS release from 2012/10/17 12:00:00 UTC
Makefiles updates to imporve portability
Made sure to be consistent in the usage of braces/parenthesis at
least on a per file basis. For variables, it is recommended to
continue to use braces.
The tested targets are the followgin ones:
* tools
* distribution
* sets
* release
The remaining NetBSD targets have not been disabled nor tested
*at all*. Try them at your own risk, they may reboot the earth.
For all compliant Makefiles, objects and generated files are put in
MAKEOBJDIR, which means you can now keep objects between two branch
switching. Same for DESTDIR, please refer to build.sh options.
Regarding new or modifications of Makefiles a few things:
* Read share/mk/bsd.README
* If you add a subdirectory, add a Makefile in it, and have it called
by the parent through the SUBDIR variable.
* Do not add arbitrary inclusion which crosses to another branch of
the hierarchy; If you can't do without it, put a comment on why.
If possible, do not use inclusion at all.
* Use as much as possible the infrastructure, it is here to make
life easier, do not fight it.
Sets and package are now used to track files.
We have one set called "minix", composed of one package called "minix-sys"
* Removing commands/tar
* Updated external/bsd/libarchive
* Adding external/bsd/libarchive/bin/tar compiled bsdtar instead
of just tar
* (tar is taken care of through the pax utility)
Change-Id: Ie773b4502fbf4e3880f28f01bb528b063a60c668
This decreases external dependencies for crosscompilation. Note that
these libraries are not built nor used by Minix itself.
Furthermore, the shell scripts that download the tarballs for these
libraries, gcc, binutils, and gmake now also support curl in addition
to wget.
They are used as build tools for cross compilation. This import does
not include the full distribution. Rather, it sports a shell script
that will download and patch the distribution when compiled from
/usr/src/tools (yet to be committed). This part of the source tree is
only necessary for cross compilation. It's not used or compiled for
native builds.
WARNING: this will break existing dynamically linked binaries if they
exist. If you have any:
. re-build world statically first if necessary
. remove libraries from /lib and /usr/lib
. then build world
This change:
. avoids possible future dismay when interfacing other
systems' binaries; done until they are abi-compatible
Thanks to Antoine Leca for pointing this out.
. common/include/arch/i386 is not actually an imported
sys/arch/i386/include but leftover Minix files;
remove and move to include/
. move include/ufs to sys/ufs, where it came from, now that
we have a sys/ hierarchy
. move mdocml/ to external/bsd/, now we have that
. single sys/arch/i386/stand/ import for boot stuff
