Commit graph

978 commits

Author SHA1 Message Date
Ben Gras
ebe3309a13 i386 rs232: do full write in out_int
. in kvm, this does the full output without truncating
	  and gets rid of the messy 'enough!' case
2014-07-28 17:06:14 +02:00
Lionel Sambuc
4684ddb6aa LLVM Minix changes
- import libcxx
 - reduce targets to the one when compiled as a tools

Change-Id: Iabb8427f80ff8e89463559a28bcb8b4f2bdbc496
2014-07-28 17:05:59 +02:00
David van Moolenbroek
87d31b0645 Correct a few library dependency tracking mistakes
Change-Id: I3d509db3946ca6c284be64c92c4cec313cc4ca1b
2014-07-28 17:05:56 +02:00
Wojciech Zajac
78cd341562 Fixed usb_storage to support more USB sticks
More TEST UNIT READY calls, as some sticks seem to require them, while others are indifferent.

Mass storage 'reset recovery' is disabled by default, as it broke communication with some sticks.

Minor fixes.
2014-07-28 17:05:55 +02:00
Wojciech Zajac
3316064b29 USB bulk only transport 'reset recovery' added
Control URB formatting for mass storage driver was also fixed.
2014-07-28 17:05:55 +02:00
Wojciech Zajac
6763c425bb Corrected invalid URBs handling 2014-07-28 17:05:55 +02:00
Wojciech Zajac
e858b9b5e9 Make MUSB use 'interval' for bulk transfers 2014-07-28 17:05:54 +02:00
Wojciech Zajac
e0f92bef05 More endpoint descriptor data held by usb_storage
Makes usb_storage remember endpoint interval and other parameters, instead of endpoint number only.
2014-07-28 17:05:54 +02:00
Wojciech Zajac
d2cf1e60b4 Removed unused transfer flags for usb_storage 2014-07-28 17:05:54 +02:00
Wojciech Zajac
cbaad3ed4b Graceful exiting for USBD 2014-07-28 17:05:54 +02:00
Wojciech Zajac
7df0836d35 USBD return value for wrong URB submit 2014-07-28 17:05:54 +02:00
Wojciech Zajac
5655b1f1a4 Graceful exiting for mass storage driver
Exit signal is now correctly handled and allocated memory is freed, before exiting.
2014-07-28 17:05:53 +02:00
Wojciech Zajac
c1ba580ae2 Generalization of USB transfer's error handling
No longer assumes EP0 for control transfer, in general HCD code.

Some additional cleanup.
2014-07-28 17:05:53 +02:00
Ben Gras
fcce231cb7 Fix passwd entries, from old format to new.
Change-Id: I78278f0cdc6b9b87bf9b3a14970a462037589d87
2014-07-28 17:05:53 +02:00
Ben Gras
cbb688a05d pty range improvement 2014-07-28 17:05:53 +02:00
Lionel Sambuc
e7f5493031 Message type for CDEV_{OPEN,CLOSE}
Change-Id: Ie58511aef2da968129a405a4ad44d0330a2adcb2
2014-07-28 17:05:52 +02:00
Lionel Sambuc
4091fdf5c4 Message type for TTY_FKEY_CONTROL
Change-Id: Ic7a8901089f14f65e840bd88b087b733c3e3bdee
2014-07-28 17:05:51 +02:00
Lionel Sambuc
e2e57d387f FKEY_EVENTS cleanups
- Fix a bug where an FKEY_EVENT request would always return EINVAL

 - Replace two manual usage of FKEY_EVENT messages by a call to
   fkey_events which is mapped to fkey_ctl.

Change-Id: I7bc54cade45a29f14c89313b3ec4c28d81a4ec93
2014-07-28 17:05:51 +02:00
Wojciech Zajac
bfff07c918 Memory related fixes for DDE/USBD
DDEKit has proper thread termination now. No more memory leaks on usb stick removal.

MUSB fixes for IRQ and memory mapping.
2014-07-28 17:05:51 +02:00
Wojciech Zajac
789aa37866 Upgraded HCD transfers
Types for data request are fixed and commented.

Control transfer has additional call for proper completion validation.
2014-07-28 17:05:51 +02:00
Wojciech Zajac
1858789bf6 Unification of various HCD types.
DDEKit URB's are no longer directly handled by HCD but rather translated and validated to avoid type conversion issues and illegal values.
2014-07-28 17:05:51 +02:00
Wojciech Zajac
7896beeeca Fixed setup packet configuration for USBD and disconnection cleanup 2014-07-28 17:05:50 +02:00
Wojciech Zajac
f73cacc767 Fix for usbd-usb_storage pairing and URB handling. Additional cleanup. 2014-07-28 17:05:50 +02:00
Wojciech Zajac
9f2204a8ad Resolution of some currently fixable TODOs 2014-07-28 17:05:50 +02:00
Lionel Sambuc
310904bf12 Message type for TTY_INPUT_EVENT
Change-Id: I2bae0a2c8326b36c438f9b340c394ec66189c1c8
2014-07-28 17:05:49 +02:00
Lionel Sambuc
1576ef5542 Message type for DL_{READ,WRITE}V_S
Change-Id: I6e25e8e994b0bdec2bb54f50e6db08e6e935c819
2014-07-28 17:05:45 +02:00
Lionel Sambuc
992b76139f Message type for DL_TASK_REPLY
Change-Id: I7f15f8f874366e93866f53d7a60a0c7ef9c98636
2014-07-28 17:05:45 +02:00
Lionel Sambuc
079646e056 Message type for DL_GETSTAT_S
Change-Id: Ia5c2bf7a3d796a6a0463af70059e82fddd43d69c
2014-07-28 17:05:45 +02:00
Lionel Sambuc
50ab3b569d Message type for DL_CONF{,_REPLY}
Change-Id: Ib0e435875b6f5cacdcbc8593f9a887b0a4c472c1
2014-07-28 17:05:45 +02:00
Lionel Sambuc
1a943bea52 Message type for INPUT_SETLEDS
Change-Id: I84ee6ee43d771409526468ce45f1ddc27e9ca986
2014-07-28 17:05:44 +02:00
Lionel Sambuc
d6626d0575 Message type for RTCDEV_*
Change-Id: Ie4257e745e1d8b6a151934949f10c7fdb1ac4778
2014-07-28 17:05:44 +02:00
Lionel Sambuc
3a82a3f90a Message type for BUSC_I2C_EXEC
Change-Id: I4b6e33df2dd70d40af4a2f2c899324a40107c56a
2014-07-28 17:05:44 +02:00
Lionel Sambuc
b8e631ff13 Message type for BUSC_I2C_RESERVE
Change-Id: Iedc2615b41c65f826868a70448fb1143bd85670f
2014-07-28 17:05:43 +02:00
Lionel Sambuc
ff905e5276 Message type for BUSC_PCI_GET_BAR
Change-Id: I5cb21f09a2c80473101f8da3f435e4dcc3b05491
2014-07-28 17:05:43 +02:00
Wojciech Zajac
a42c8f6c41 Error checking for USB interrupt transfer 2014-07-28 17:05:41 +02:00
Wojciech Zajac
fc49538d86 Initial interrupt URBs support 2014-07-28 17:05:41 +02:00
Wojciech Zajac
5308df03ed Volatile keyword fix for MUSB reset loop. 2014-07-28 17:05:40 +02:00
Kees Jongenburger
880ae44a72 usb:Adding usb enumeration.
usbd update from JPEmbedded

Change-Id: I4098b29a3188abe7110d59f0746ea40ac5818bbf

http://gerrit.minix3.org/#/c/2698/
2014-07-28 17:05:40 +02:00
Kees Jongenburger
146e5a99e4 usbd:fix get_bp workaround
Change-Id: I6967dc515e3da4330503eb716e8f0165df71b8f1

http://gerrit.minix3.org/#/c/2697/
2014-07-28 17:05:40 +02:00
Kees Jongenburger
9cc744ad52 arm:build and install usbd by default.
Change-Id: I3f7a5bf5d4b75ba820297b0d5fb4447e5126e641

http://gerrit.minix3.org/#/c/2696/
2014-07-28 17:05:40 +02:00
Kees Jongenburger
27bb595b9d build:always build and install the usb mass storage driver.
Change-Id: Ib54902a21443bd110bfc7498c00776831cbdefaf

http://gerrit.minix3.org/#/c/2693/
2014-07-28 17:05:39 +02:00
Kees Jongenburger
902045e94e build:indenting
Change-Id: I85840455ab0ff94c33a2abe342967f6248d1e45f

http://gerrit.minix3.org/#/c/2691/
2014-07-28 17:05:39 +02:00
Kees Jongenburger
dfb2b8398d usb:adding usb mass storage driver.
Change-Id: I9e431d56eddfeec21413c290b2fa7ad35b566f6b

http://gerrit.minix3.org/#/c/2690/
2014-07-28 17:05:39 +02:00
Kees Jongenburger
ed3391fd23 arm:adding the usbd source code.
Change-Id: Ia3c50a8c5e11bf20100354de266913112cc236f9

http://gerrit.minix3.org/#/c/2689/
2014-07-28 17:05:38 +02:00
Lionel Sambuc
6a309697f4 From Ben Gras, add select support on /dev/random.
Change-Id: I47bf4c45285458ecc224df0564edf98afdb2c9d6
2014-07-28 17:05:23 +02:00
Kees Jongenburger
4dafcd9245 build:also build the hello driver on arm.
Change-Id: I5dd82d3b56b907bfc137313f503f9d9c52c199ef
2014-07-28 17:05:21 +02:00
David van Moolenbroek
415782f70f TTY: do not reply to KERNEL
Diagnostics messages are printed using locally generated requests,
using KERNEL as the calling endpoint.  No reply should be sent for
such cases.  This check was accidentally lost with the previous
removal of tty_reply().

Change-Id: I4b76215a4d90e927b0071675d89d861aa399abb3
2014-07-28 17:05:13 +02:00
David van Moolenbroek
760f3d62d7 PTY: split off from TTY
Requires recreation of /dev/tty[pq]*, /dev/pty[pq]* device nodes.

Change-Id: I0e5a28d82faa934497fd3b97d619e506bcb5f439
2014-07-28 17:05:12 +02:00
Ben Gras
3c7f4e462e 64-bit bdev position
Change-Id: I149693624610e04af0c5e4437b5efa484a33467d
2014-07-28 17:05:10 +02:00
Lionel Sambuc
84d9c625bf Synchronize on NetBSD-CVS (2013/12/1 12:00:00 UTC)
- Fix for possible unset uid/gid in toproto
 - Fix for default mtree style
 - Update libelf
 - Importing libexecinfo
 - Resynchronize GCC, mpc, gmp, mpfr
 - build.sh: Replace params with show-params.
     This has been done as the make target has been renamed in the same
     way, while a new target named params has been added. This new
     target generates a file containing all the parameters, instead of
     printing it on the console.
 - Update test48 with new etc/services (Fix by Ben Gras <ben@minix3.org)
     get getservbyport() out of the inner loop

Change-Id: Ie6ad5226fa2621ff9f0dee8782ea48f9443d2091
2014-07-28 17:05:06 +02:00