minix/include/minix/com.h

#ifndef _MINIX_COM_H
#define _MINIX_COM_H 

/*===========================================================================*
 *          	    		Magic process numbers			     *
 *===========================================================================*/

/* These may not be any valid endpoint (see <minix/endpoint.h>). */
#define ANY		0x7ace	/* used to indicate 'any process' */
#define NONE 		0x6ace  /* used to indicate 'no process at all' */
#define SELF		0x8ace 	/* used to indicate 'own process' */
#define _MAX_MAGIC_PROC (SELF)	/* used by <minix/endpoint.h> 
				   to determine generation size */

/*===========================================================================*
 *            	Process numbers of processes in the system image	     *
 *===========================================================================*/

/* The values of several task numbers depend on whether they or other tasks
 * are enabled. They are defined as (PREVIOUS_TASK - ENABLE_TASK) in general.
 * ENABLE_TASK is either 0 or 1, so a task either gets a new number, or gets
 * the same number as the previous task and is further unused. Note that the
 * order should correspond to the order in the task table defined in table.c. 
 */

/* Kernel tasks. These all run in the same address space. */
#define IDLE             -4	/* runs when no one else can run */
#define CLOCK  		 -3	/* alarms and other clock functions */
#define SYSTEM           -2	/* request system functionality */
#define KERNEL           -1	/* pseudo-process for IPC and scheduling */
#define HARDWARE     KERNEL	/* for hardware interrupt handlers */

/* Number of tasks. Note that NR_PROCS is defined in <minix/config.h>. */
#define NR_TASKS	  4 

/* User-space processes, that is, device drivers, servers, and INIT. */
#define PM_PROC_NR	  0	/* process manager */
#define FS_PROC_NR 	  1	/* file system */
#define RS_PROC_NR 	  2	/* reincarnation server */
#define MEM_PROC_NR 	  3  	/* memory driver (RAM disk, null, etc.) */
#define LOG_PROC_NR	  4	/* log device driver */
#define TTY_PROC_NR	  5	/* terminal (TTY) driver */
#define DS_PROC_NR	  6    	/* data store server */
#define INIT_PROC_NR	  7    	/* init -- goes multiuser */

/* Number of processes contained in the system image. */
#define NR_BOOT_PROCS 	(NR_TASKS + INIT_PROC_NR + 1)

/*===========================================================================*
 *                	   Kernel notification types                         *
 *===========================================================================*/

/* Kernel notification types. In principle, these can be sent to any process,
 * so make sure that these types do not interfere with other message types.
 * Notifications are prioritized because of the way they are unhold() and
 * blocking notifications are delivered. The lowest numbers go first. The
 * offset are used for the per-process notification bit maps. 
 */
#define NOTIFY_MESSAGE		  0x1000
#define NOTIFY_FROM(p_nr)	 (NOTIFY_MESSAGE | ((p_nr) + NR_TASKS)) 
#  define PROC_EVENT	NOTIFY_FROM(PM_PROC_NR) /* process status change */
#  define SYN_ALARM	NOTIFY_FROM(CLOCK) 	/* synchronous alarm */
#  define SYS_SIG	NOTIFY_FROM(SYSTEM) 	/* system signal */
#  define HARD_INT	NOTIFY_FROM(HARDWARE) 	/* hardware interrupt */
#  define NEW_KSIG	NOTIFY_FROM(HARDWARE)  	/* new kernel signal */
#  define FKEY_PRESSED	NOTIFY_FROM(TTY_PROC_NR)/* function key press */
#  define DEV_PING	NOTIFY_FROM(RS_PROC_NR) /* driver liveness ping */
#  define DS_UPDATE	NOTIFY_FROM(DS_PROC_NR) /* subscription update */

/* Shorthands for message parameters passed with notifications. */
#define NOTIFY_SOURCE		m_source
#define NOTIFY_TYPE		m_type
#define NOTIFY_ARG		m2_l1
#define NOTIFY_TIMESTAMP	m2_l2
#define NOTIFY_FLAGS		m2_i1

/*===========================================================================*
 *                Messages for BUS controller drivers 			     *
 *===========================================================================*/
#define BUSC_RQ_BASE	0x300	/* base for request types */
#define BUSC_RS_BASE	0x380	/* base for response types */

#define BUSC_PCI_INIT		(BUSC_RQ_BASE + 0)	/* First message to
							 * PCI driver
							 */
#define BUSC_PCI_FIRST_DEV	(BUSC_RQ_BASE + 1)	/* Get index (and
							 * vid/did) of the
							 * first PCI device
							 */
#define BUSC_PCI_NEXT_DEV	(BUSC_RQ_BASE + 2)	/* Get index (and
							 * vid/did) of the
							 * next PCI device
							 */
#define BUSC_PCI_FIND_DEV	(BUSC_RQ_BASE + 3)	/* Get index of a
							 * PCI device based on
							 * bus/dev/function
							 */
#define BUSC_PCI_IDS		(BUSC_RQ_BASE + 4)	/* Get vid/did from an
							 * index
							 */
#define BUSC_PCI_DEV_NAME	(BUSC_RQ_BASE + 5)	/* Get the name of a
							 * PCI device
							 */
#define BUSC_PCI_SLOT_NAME	(BUSC_RQ_BASE + 6)	/* Get the name of a
							 * PCI slot
							 */
#define BUSC_PCI_RESERVE	(BUSC_RQ_BASE + 7)	/* Reserve a PCI dev */
#define BUSC_PCI_ATTR_R8	(BUSC_RQ_BASE + 8)	/* Read 8-bit
							 * attribute value
							 */
#define BUSC_PCI_ATTR_R16	(BUSC_RQ_BASE + 9)	/* Read 16-bit
							 * attribute value
							 */
#define BUSC_PCI_ATTR_R32	(BUSC_RQ_BASE + 10)	/* Read 32-bit
							 * attribute value
							 */
#define BUSC_PCI_ATTR_W8	(BUSC_RQ_BASE + 11)	/* Write 8-bit
							 * attribute value
							 */
#define BUSC_PCI_ATTR_W16	(BUSC_RQ_BASE + 12)	/* Write 16-bit
							 * attribute value
							 */
#define BUSC_PCI_ATTR_W32	(BUSC_RQ_BASE + 13)	/* Write 32-bit
							 * attribute value
							 */
#define BUSC_PCI_RESCAN		(BUSC_RQ_BASE + 14)	/* Rescan bus */
#define BUSC_PCI_DEV_NAME_S	(BUSC_RQ_BASE + 15)	/* Get the name of a
							 * PCI device
							 * (safecopy)
							 */
#define BUSC_PCI_SLOT_NAME_S	(BUSC_RQ_BASE + 16)	/* Get the name of a
							 * PCI slot (safecopy)
							 */

/*===========================================================================*
 *                Messages for BLOCK and CHARACTER device drivers	     *
 *===========================================================================*/

/* Message types for device drivers. */
#define DEV_RQ_BASE   0x400	/* base for device request types */
#define DEV_RS_BASE   0x500	/* base for device response types */

#define CANCEL       	(DEV_RQ_BASE +  0) /* force a task to cancel */
#define DEV_READ	(DEV_RQ_BASE +  3) /* read from minor device */
#define DEV_WRITE   	(DEV_RQ_BASE +  4) /* write to minor device */
#define DEV_IOCTL    	(DEV_RQ_BASE +  5) /* I/O control code */
#define DEV_OPEN     	(DEV_RQ_BASE +  6) /* open a minor device */
#define DEV_CLOSE    	(DEV_RQ_BASE +  7) /* close a minor device */
#define DEV_SCATTER  	(DEV_RQ_BASE +  8) /* write from a vector */
#define DEV_GATHER   	(DEV_RQ_BASE +  9) /* read into a vector */
#define TTY_SETPGRP 	(DEV_RQ_BASE + 10) /* set process group */
#define TTY_EXIT	(DEV_RQ_BASE + 11) /* process group leader exited */	
#define DEV_SELECT	(DEV_RQ_BASE + 12) /* request select() attention */
#define DEV_STATUS   	(DEV_RQ_BASE + 13) /* request driver status */

#define DEV_READ_S	(DEV_RQ_BASE + 20) /* (safecopy) read from minor */
#define DEV_WRITE_S   	(DEV_RQ_BASE + 21) /* (safecopy) write to minor */
#define DEV_SCATTER_S  	(DEV_RQ_BASE + 22) /* (safecopy) write from a vector */
#define DEV_GATHER_S   	(DEV_RQ_BASE + 23) /* (safecopy) read into a vector */
#define DEV_IOCTL_S    	(DEV_RQ_BASE + 24) /* (safecopy) I/O control code */

#define DEV_REPLY       (DEV_RS_BASE + 0) /* general task reply */
#define DEV_CLONED      (DEV_RS_BASE + 1) /* return cloned minor */
#define DEV_REVIVE      (DEV_RS_BASE + 2) /* driver revives process */
#define DEV_IO_READY    (DEV_RS_BASE + 3) /* selected device ready */
#define DEV_NO_STATUS   (DEV_RS_BASE + 4) /* empty status reply */

/* Field names for messages to block and character device drivers. */
#define DEVICE    	m2_i1	/* major-minor device */
#define IO_ENDPT	m2_i2	/* which (proc/endpoint) wants I/O? */
#define COUNT   	m2_i3	/* how many bytes to transfer */
#define REQUEST 	m2_i3 	/* ioctl request code */
#define POSITION	m2_l1	/* file offset (low 4 bytes) */
#define HIGHPOS		m2_l2	/* file offset (high 4 bytes) */
#define ADDRESS 	m2_p1	/* core buffer address */
#define IO_GRANT 	m2_p1	/* grant id (for DEV_*_S variants) */

/* Field names for DEV_SELECT messages to device drivers. */
#define DEV_MINOR	m2_i1	/* minor device */
#define DEV_SEL_OPS	m2_i2	/* which select operations are requested */
#define DEV_SEL_WATCH	m2_i3	/* request notify if no operations are ready */

/* Field names used in reply messages from tasks. */
#define REP_ENDPT	m2_i1	/* # of proc on whose behalf I/O was done */
#define REP_STATUS	m2_i2	/* bytes transferred or error number */
#define REP_IO_GRANT	m2_i3	/* DEV_REVIVE: grant by which I/O was done */
#  define SUSPEND 	 -998 	/* status to suspend caller, reply later */

/* Field names for messages to TTY driver. */
#define TTY_LINE	DEVICE	/* message parameter: terminal line */
#define TTY_REQUEST	COUNT	/* message parameter: ioctl request code */
#define TTY_SPEK	POSITION/* message parameter: ioctl speed, erasing */
#define TTY_PGRP 	m2_i3	/* message parameter: process group */	

/* Field names for the QIC 02 status reply from tape driver */
#define TAPE_STAT0	m2_l1
#define TAPE_STAT1	m2_l2

/*===========================================================================*
 *                  	   Messages for networking layer		     *
 *===========================================================================*/

/* Message types for network layer requests. This layer acts like a driver. */
#define NW_OPEN		DEV_OPEN
#define NW_CLOSE	DEV_CLOSE
#define NW_READ		DEV_READ
#define NW_WRITE	DEV_WRITE
#define NW_IOCTL	DEV_IOCTL
#define NW_CANCEL	CANCEL

/* Base type for data link layer requests and responses. */
#define DL_RQ_BASE	0x800		
#define DL_RS_BASE	0x900		

/* Message types for data link layer requests. */
#define DL_WRITE	(DL_RQ_BASE + 3)
#define DL_WRITEV	(DL_RQ_BASE + 4)
#define DL_READ		(DL_RQ_BASE + 5)
#define DL_READV	(DL_RQ_BASE + 6)
#define DL_CONF		(DL_RQ_BASE + 7)
#define DL_STOP		(DL_RQ_BASE + 8)
#define DL_GETSTAT	(DL_RQ_BASE + 9)
#define DL_GETNAME	(DL_RQ_BASE +10)
#define DL_WRITEV_S	(DL_RQ_BASE +11)
#define DL_READV_S	(DL_RQ_BASE +12)
#define DL_GETSTAT_S	(DL_RQ_BASE +13)

/* Message type for data link layer replies. */
#define DL_CONF_REPLY	(DL_RS_BASE + 20)
#define DL_TASK_REPLY	(DL_RS_BASE + 21)
#define DL_NAME_REPLY	(DL_RS_BASE + 22)

/* Field names for data link layer messages. */
#define DL_PORT		m2_i1
#define DL_PROC		m2_i2	/* endpoint */
#define DL_COUNT	m2_i3
#define DL_MODE		m2_l1
#define DL_CLCK		m2_l2
#define DL_ADDR		m2_p1
#define DL_STAT		m2_l1
#define DL_GRANT	m2_l2
#define DL_NAME		m3_ca1

/* Bits in 'DL_STAT' field of DL replies. */
#  define DL_PACK_SEND		0x01
#  define DL_PACK_RECV		0x02
#  define DL_READ_IP		0x04

/* Bits in 'DL_MODE' field of DL requests. */
#  define DL_NOMODE		0x0
#  define DL_PROMISC_REQ	0x2
#  define DL_MULTI_REQ		0x4
#  define DL_BROAD_REQ		0x8

/*===========================================================================*
 *                  SYSTASK request types and field names                    *
 *===========================================================================*/

/* System library calls are dispatched via a call vector, so be careful when 
 * modifying the system call numbers. The numbers here determine which call
 * is made from the call vector.
 */ 
#define KERNEL_CALL	0x600	/* base for kernel calls to SYSTEM */ 

#  define SYS_FORK       (KERNEL_CALL + 0)	/* sys_fork() */
#  define SYS_EXEC       (KERNEL_CALL + 1)	/* sys_exec() */
#  define SYS_EXIT	 (KERNEL_CALL + 2)	/* sys_exit() */
#  define SYS_NICE       (KERNEL_CALL + 3)	/* sys_nice() */
#  define SYS_PRIVCTL    (KERNEL_CALL + 4)	/* sys_privctl() */
#  define SYS_TRACE      (KERNEL_CALL + 5)	/* sys_trace() */
#  define SYS_KILL       (KERNEL_CALL + 6)	/* sys_kill() */

#  define SYS_GETKSIG    (KERNEL_CALL + 7)	/* sys_getsig() */
#  define SYS_ENDKSIG    (KERNEL_CALL + 8)	/* sys_endsig() */
#  define SYS_SIGSEND    (KERNEL_CALL + 9)	/* sys_sigsend() */
#  define SYS_SIGRETURN  (KERNEL_CALL + 10)	/* sys_sigreturn() */

#  define SYS_NEWMAP     (KERNEL_CALL + 11)	/* sys_newmap() */
#  define SYS_SEGCTL     (KERNEL_CALL + 12)	/* sys_segctl() */
#  define SYS_MEMSET     (KERNEL_CALL + 13)	/* sys_memset() */

#  define SYS_UMAP       (KERNEL_CALL + 14)	/* sys_umap() */
#  define SYS_VIRCOPY    (KERNEL_CALL + 15)	/* sys_vircopy() */
#  define SYS_PHYSCOPY   (KERNEL_CALL + 16) 	/* sys_physcopy() */
#  define SYS_VIRVCOPY   (KERNEL_CALL + 17)	/* sys_virvcopy() */
#  define SYS_PHYSVCOPY  (KERNEL_CALL + 18)	/* sys_physvcopy() */

#  define SYS_IRQCTL     (KERNEL_CALL + 19)	/* sys_irqctl() */
#  define SYS_INT86      (KERNEL_CALL + 20)	/* sys_int86() */
#  define SYS_DEVIO      (KERNEL_CALL + 21)	/* sys_devio() */
#  define SYS_SDEVIO     (KERNEL_CALL + 22)	/* sys_sdevio() */
#  define SYS_VDEVIO     (KERNEL_CALL + 23)	/* sys_vdevio() */

#  define SYS_SETALARM	 (KERNEL_CALL + 24)	/* sys_setalarm() */
#  define SYS_TIMES	 (KERNEL_CALL + 25)	/* sys_times() */
#  define SYS_GETINFO    (KERNEL_CALL + 26) 	/* sys_getinfo() */
#  define SYS_ABORT      (KERNEL_CALL + 27)	/* sys_abort() */
#  define SYS_IOPENABLE  (KERNEL_CALL + 28)	/* sys_enable_iop() */
#  define SYS_VM_SETBUF  (KERNEL_CALL + 29)	/* sys_vm_setbuf() */
#  define SYS_VM_MAP  	 (KERNEL_CALL + 30)	/* sys_vm_map() */
#  define SYS_SAFECOPYFROM (KERNEL_CALL + 31)	/* sys_safecopyfrom() */
#  define SYS_SAFECOPYTO   (KERNEL_CALL + 32)	/* sys_safecopyto() */
#  define SYS_VSAFECOPY  (KERNEL_CALL + 33)	/* sys_vsafecopy() */
#  define SYS_SETGRANT   (KERNEL_CALL + 34)	/* sys_setgrant() */
#  define SYS_READBIOS   (KERNEL_CALL + 35)	/* sys_readbios() */

#define NR_SYS_CALLS	36	/* number of system calls */ 

/* Pseudo call for use in kernel/table.c. */
#define SYS_ALL_CALLS (NR_SYS_CALLS)

/* Subfunctions for SYS_PRIVCTL */
#define SYS_PRIV_INIT		1	/* Initialize a privilege structure */
#define SYS_PRIV_ADD_IO		2	/* Add I/O range (struct io_range) */
#define SYS_PRIV_ADD_MEM	3	/* Add memory range (struct mem_range)
					 */
#define SYS_PRIV_ADD_IRQ	4	/* Add IRQ */
#define SYS_PRIV_USER		5	/* Make a process an oridinary user 
					 * process.
					 */

/* Subfunctions for SYS_SETGRANT */
#define SYS_PARAM_SET_GRANT	1	/* Set address and size of grant table */

/* Field names for SYS_MEMSET, SYS_SEGCTL. */
#define MEM_PTR		m2_p1	/* base */
#define MEM_COUNT	m2_l1	/* count */
#define MEM_PATTERN	m2_l2   /* pattern to write */
#define MEM_CHUNK_BASE	m4_l1	/* physical base address */
#define MEM_CHUNK_SIZE	m4_l2	/* size of mem chunk */
#define MEM_TOT_SIZE	m4_l3	/* total memory size */
#define MEM_CHUNK_TAG	m4_l4	/* tag to identify chunk of mem */

/* Field names for SYS_DEVIO, SYS_VDEVIO, SYS_SDEVIO. */
#define DIO_REQUEST	m2_i3	/* device in or output */
#   define _DIO_INPUT		0x001
#   define _DIO_OUTPUT		0x002
#   define _DIO_DIRMASK		0x00f
#   define _DIO_BYTE		0x010
#   define _DIO_WORD		0x020
#   define _DIO_LONG		0x030
#   define _DIO_TYPEMASK	0x0f0
#   define _DIO_SAFE		0x100
#   define _DIO_SAFEMASK	0xf00
#   define DIO_INPUT_BYTE	    (_DIO_INPUT|_DIO_BYTE)
#   define DIO_INPUT_WORD	    (_DIO_INPUT|_DIO_WORD)
#   define DIO_OUTPUT_BYTE	    (_DIO_OUTPUT|_DIO_BYTE)
#   define DIO_OUTPUT_WORD	    (_DIO_OUTPUT|_DIO_WORD)
#   define DIO_SAFE_INPUT_BYTE      (_DIO_INPUT|_DIO_BYTE|_DIO_SAFE)
#   define DIO_SAFE_INPUT_WORD      (_DIO_INPUT|_DIO_WORD|_DIO_SAFE)
#   define DIO_SAFE_OUTPUT_BYTE     (_DIO_OUTPUT|_DIO_BYTE|_DIO_SAFE)
#   define DIO_SAFE_OUTPUT_WORD     (_DIO_OUTPUT|_DIO_WORD|_DIO_SAFE)
#define DIO_PORT	m2_l1	/* single port address */
#define DIO_VALUE	m2_l2	/* single I/O value */
#define DIO_VEC_ADDR	m2_p1   /* address of buffer or (p,v)-pairs */
#define DIO_VEC_SIZE	m2_l2   /* number of elements in vector */
#define DIO_VEC_ENDPT	m2_i2   /* number of process where vector is */
#define DIO_OFFSET	m2_i1	/* offset from grant */

/* Field names for SYS_SIGNARLM, SYS_FLAGARLM, SYS_SYNCALRM. */
#define ALRM_EXP_TIME   m2_l1	/* expire time for the alarm call */
#define ALRM_ABS_TIME   m2_i2	/* set to 1 to use absolute alarm time */
#define ALRM_TIME_LEFT  m2_l1	/* how many ticks were remaining */
#define ALRM_ENDPT      m2_i1	/* which process wants the alarm? */
#define ALRM_FLAG_PTR	m2_p1   /* virtual address of timeout flag */ 	

/* Field names for SYS_IRQCTL. */
#define IRQ_REQUEST     m5_c1	/* what to do? */
#  define IRQ_SETPOLICY     1	/* manage a slot of the IRQ table */
#  define IRQ_RMPOLICY      2	/* remove a slot of the IRQ table */
#  define IRQ_ENABLE        3	/* enable interrupts */
#  define IRQ_DISABLE       4	/* disable interrupts */
#define IRQ_VECTOR	m5_c2   /* irq vector */
#define IRQ_POLICY	m5_i1   /* options for IRQCTL request */
#  define IRQ_REENABLE  0x001	/* reenable IRQ line after interrupt */
#  define IRQ_BYTE      0x100	/* byte values */      
#  define IRQ_WORD      0x200	/* word values */
#  define IRQ_LONG      0x400	/* long values */
#define IRQ_ENDPT	m5_i2   /* endpoint number, SELF, NONE */
#define IRQ_HOOK_ID	m5_l3   /* id of irq hook at kernel */

/* Field names for SYS_SEGCTL. */
#define SEG_SELECT	m4_l1   /* segment selector returned */ 
#define SEG_OFFSET	m4_l2	/* offset in segment returned */
#define SEG_PHYS	m4_l3	/* physical address of segment */
#define SEG_SIZE	m4_l4	/* segment size */
#define SEG_INDEX	m4_l5	/* segment index in remote map */

/* Field names for SYS_VIDCOPY. */
#define VID_REQUEST	m4_l1	/* what to do? */
#  define VID_VID_COPY	   1	/* request vid_vid_copy() */
#  define MEM_VID_COPY     2	/* request mem_vid_copy() */
#define VID_SRC_ADDR	m4_l2	/* virtual address in memory */
#define VID_SRC_OFFSET	m4_l3	/* offset in video memory */
#define VID_DST_OFFSET	m4_l4	/* offset in video memory */
#define VID_CP_COUNT	m4_l5	/* number of words to be copied */

/* Field names for SYS_ABORT. */
#define ABRT_HOW	m1_i1	/* RBT_REBOOT, RBT_HALT, etc. */
#define ABRT_MON_ENDPT  m1_i2	/* process where monitor params are */
#define ABRT_MON_LEN	m1_i3	/* length of monitor params */
#define ABRT_MON_ADDR   m1_p1	/* virtual address of monitor params */

/* Field names for _UMAP, _VIRCOPY, _PHYSCOPY. */
#define CP_SRC_SPACE 	m5_c1	/* T or D space (stack is also D) */
#define CP_SRC_ENDPT	m5_i1	/* process to copy from */
#define CP_SRC_ADDR	m5_l1	/* address where data come from */
#define CP_DST_SPACE	m5_c2	/* T or D space (stack is also D) */
#define CP_DST_ENDPT	m5_i2	/* process to copy to */
#define CP_DST_ADDR	m5_l2	/* address where data go to */
#define CP_NR_BYTES	m5_l3	/* number of bytes to copy */

/* Field names for SYS_VCOPY and SYS_VVIRCOPY. */
#define VCP_NR_OK	m1_i2	/* number of successfull copies */
#define VCP_VEC_SIZE	m1_i3	/* size of copy vector */
#define VCP_VEC_ADDR	m1_p1	/* pointer to copy vector */

/* Field names for SYS_GETINFO. */
#define I_REQUEST      m7_i3	/* what info to get */
#   define GET_KINFO	   0	/* get kernel information structure */
#   define GET_IMAGE	   1	/* get system image table */
#   define GET_PROCTAB	   2	/* get kernel process table */
#   define GET_RANDOMNESS  3	/* get randomness buffer */
#   define GET_MONPARAMS   4	/* get monitor parameters */
#   define GET_KENV	   5	/* get kernel environment string */
#   define GET_IRQHOOKS	   6	/* get the IRQ table */
#   define GET_KMESSAGES   7	/* get kernel messages */
#   define GET_PRIVTAB	   8	/* get kernel privileges table */
#   define GET_KADDRESSES  9	/* get various kernel addresses */
#   define GET_SCHEDINFO  10	/* get scheduling queues */
#   define GET_PROC 	  11	/* get process slot if given process */
#   define GET_MACHINE 	  12	/* get machine information */
#   define GET_LOCKTIMING 13	/* get lock()/unlock() latency timing */
#   define GET_BIOSBUFFER 14	/* get a buffer for BIOS calls */
#   define GET_LOADINFO   15	/* get load average information */
#define I_ENDPT      m7_i4	/* calling process */
#define I_VAL_PTR      m7_p1	/* virtual address at caller */ 
#define I_VAL_LEN      m7_i1	/* max length of value */
#define I_VAL_PTR2     m7_p2	/* second virtual address */ 
#define I_VAL_LEN2_E   m7_i2	/* second length, or proc nr */
#   define GET_IRQACTIDS  16	/* get the IRQ masks */

/* Field names for SYS_TIMES. */
#define T_ENDPT      m4_l1	/* process to request time info for */
#define T_USER_TIME    m4_l1	/* user time consumed by process */
#define T_SYSTEM_TIME  m4_l2	/* system time consumed by process */
#define T_CHILD_UTIME  m4_l3	/* user time consumed by process' children */
#define T_CHILD_STIME  m4_l4	/* sys time consumed by process' children */
#define T_BOOT_TICKS   m4_l5	/* number of clock ticks since boot time */

/* vm_map */
#define VM_MAP_ENDPT		m4_l1
#define VM_MAP_MAPUNMAP		m4_l2
#define VM_MAP_BASE		m4_l3
#define VM_MAP_SIZE		m4_l4
#define VM_MAP_ADDR		m4_l5

/* Field names for SYS_TRACE, SYS_PRIVCTL. */
#define CTL_ENDPT    m2_i1	/* process number of the caller */
#define CTL_REQUEST    m2_i2	/* server control request */
#define CTL_MM_PRIV    m2_i3	/* privilege as seen by PM */
#define CTL_ARG_PTR    m2_p1	/* pointer to argument */
#define CTL_ADDRESS    m2_l1	/* address at traced process' space */
#define CTL_DATA       m2_l2	/* data field for tracing */

/* Field names for SYS_SETGRANT */
#define SG_ADDR		m2_p1	/* address */
#define SG_SIZE		m2_i2	/* no. of entries */

/* Field names for SYS_KILL, SYS_SIGCTL */
#define SIG_REQUEST    m2_l2	/* PM signal control request */
#define S_GETSIG 	   0	/* get pending kernel signal */
#define S_ENDSIG 	   1	/* finish a kernel signal */
#define S_SENDSIG   	   2	/* POSIX style signal handling */
#define S_SIGRETURN	   3 	/* return from POSIX handling */
#define S_KILL		   4 	/* servers kills process with signal */
#define SIG_ENDPT       m2_i1	/* process number for inform */
#define SIG_NUMBER     m2_i2	/* signal number to send */
#define SIG_FLAGS      m2_i3	/* signal flags field */
#define SIG_MAP        m2_l1	/* used by kernel to pass signal bit map */
#define SIG_CTXT_PTR   m2_p1	/* pointer to info to restore signal context */

/* Field names for SYS_FORK, _EXEC, _EXIT, _NEWMAP. */
#define PR_ENDPT       m1_i1	/* indicates a process */
#define PR_PRIORITY    m1_i2	/* process priority */
#define PR_SLOT        m1_i2	/* indicates a process slot */
#define PR_PID	       m1_i3	/* process id at process manager */
#define PR_STACK_PTR   m1_p1	/* used for stack ptr in sys_exec, sys_getsp */
#define PR_TRACING     m1_i3	/* flag to indicate tracing is on/ off */
#define PR_NAME_PTR    m1_p2	/* tells where program name is for dmp */
#define PR_IP_PTR      m1_p3	/* initial value for ip after exec */
#define PR_MEM_PTR     m1_p1	/* tells where memory map is for sys_newmap
				 * and sys_fork
				 */

/* Field names for SYS_INT86 */
#define INT86_REG86    m1_p1	/* pointer to registers */

/* Field names for SYS_SAFECOPY* */
#define SCP_FROM_TO	m2_i1	/* from/to whom? */
#define SCP_INFO	m2_i2	/* byte: DDDDSSSS Dest and Src seg */
#define SCP_GID		m2_i3	/* grant id */
#define SCP_OFFSET	m2_l1	/* offset within grant */
#define	SCP_ADDRESS	m2_p1	/* my own address */
#define	SCP_BYTES	m2_l2	/* bytes from offset */

/* Field names for SYS_VSAFECOPY* */
#define VSCP_VEC_ADDR	m2_p1	/* start of vector */
#define VSCP_VEC_SIZE	m2_l2	/* elements in vector */

/* For the SCP_INFO field: encoding and decoding. */
#define SCP_MAKEINFO(seg)  ((seg) & 0xffff)
#define SCP_INFO2SEG(info) ((info) & 0xffff)

/* Field names for SELECT (FS). */
#define SEL_NFDS       m8_i1
#define SEL_READFDS    m8_p1
#define SEL_WRITEFDS   m8_p2
#define SEL_ERRORFDS   m8_p3
#define SEL_TIMEOUT    m8_p4

/* Field names for GETSYSINFO_UP (PM). */
#define SIU_WHAT	m2_i1
#define SIU_LEN		m2_i2
#define SIU_WHERE	m2_p1

/* Message for SYS_READBIOS */
#define RDB_SIZE	m2_i1
#define RDB_ADDR	m2_l1
#define RDB_BUF		m2_p1

/*===========================================================================*
 *                Messages for the Reincarnation Server 		     *
 *===========================================================================*/

#define RS_RQ_BASE		0x700

#define RS_UP		(RS_RQ_BASE + 0)	/* start system service */
#define RS_DOWN		(RS_RQ_BASE + 1)	/* stop system service */
#define RS_REFRESH	(RS_RQ_BASE + 2)	/* restart system service */
#define RS_RESCUE	(RS_RQ_BASE + 3)	/* set rescue directory */
#define RS_SHUTDOWN	(RS_RQ_BASE + 4)	/* alert about shutdown */
#define RS_UP_COPY	(RS_RQ_BASE + 5)	/* start system service and
						 * keep the binary in memory
						 */
#define RS_RUN		(RS_RQ_BASE + 6)	/* run without restart */

#  define RS_CMD_ADDR		m1_p1		/* command string */
#  define RS_CMD_LEN		m1_i1		/* length of command */
#  define RS_PID		m1_i1		/* pid of system service */
#  define RS_PERIOD 	        m1_i2		/* heartbeat period */
#  define RS_DEV_MAJOR          m1_i3           /* major device number */

/*===========================================================================*
 *                Messages for the Data Store Server			     *
 *===========================================================================*/

#define DS_RQ_BASE		0x800

#define DS_PUBLISH	(DS_RQ_BASE + 0)	/* publish information */
#define DS_SUBSCRIBE	(DS_RQ_BASE + 1)	/* subscribe to information */
#define DS_RETRIEVE	(DS_RQ_BASE + 2)	/* retrieve information by name */
#define DS_CHECK	(DS_RQ_BASE + 3)	/* retrieve updated information */

/* DS field names: DS_SUBSCRIBE, DS_PUBLISH, DS_RETRIEVE */
#  define DS_KEY_GRANT		m2_p1		/* key for the information */
#  define DS_KEY_LEN		m2_i1		/* length of key incl. '\0' */
#  define DS_FLAGS		m2_i2		/* flags provided by caller */

/* DS_PUBLISH, DS_RETRIEVE */
#  define DS_VAL		m2_l1		/* data (u32, char *, etc.) */
#  define DS_VAL_LEN		m2_l2		/* data length */

/*===========================================================================*
 *                Miscellaneous messages used by TTY			     *
 *===========================================================================*/

/* Miscellaneous request types and field names, e.g. used by IS server. */
#define FKEY_CONTROL 		98  	/* control a function key at the TTY */
#  define FKEY_REQUEST	     m2_i1	/* request to perform at TTY */
#  define    FKEY_MAP		10	/* observe function key */
#  define    FKEY_UNMAP		11	/* stop observing function key */
#  define    FKEY_EVENTS	12	/* request open key presses */
#  define FKEY_FKEYS	      m2_l1	/* F1-F12 keys pressed */
#  define FKEY_SFKEYS	      m2_l2	/* Shift-F1-F12 keys pressed */
#define DIAG_BASE	0xa00
#define DIAGNOSTICS 	(DIAG_BASE+1) 	/* output a string without FS in between */
#define DIAGNOSTICS_S 	(DIAG_BASE+2) 	/* grant-based version of DIAGNOSTICS */
#  define DIAG_PRINT_BUF_G    m1_p1
#  define DIAG_BUF_COUNT      m1_i1
#define GET_KMESS	(DIAG_BASE+3)	/* get kmess from TTY */
#  define GETKM_PTR	      m1_p1
#define GET_KMESS_S	(DIAG_BASE+4)	/* get kmess from TTY */
#  define GETKM_GRANT	      m1_i1

#define PM_BASE	0x900
#define PM_GET_WORK	(PM_BASE + 1)	/* Get work from PM */
#define PM_IDLE		(PM_BASE + 2)	/* PM doesn't have any more work */
#define PM_BUSY		(PM_BASE + 3)	/* A reply from FS is needed */
#define PM_STIME	(PM_BASE + 4)	/* Tell FS about the new system time */
#define		PM_STIME_TIME	m1_i1		/* boottime */
#define PM_SETSID	(PM_BASE + 5)	/* Tell FS about the session leader */
#define		PM_SETSID_PROC	m1_i1		/* process */
#define PM_SETGID	(PM_BASE + 6)	/* Tell FS about the new group IDs */
#define		PM_SETGID_PROC	m1_i1		/* process */
#define		PM_SETGID_EGID	m1_i2		/* effective group id */
#define		PM_SETGID_RGID	m1_i3		/* real group id */
#define PM_SETUID	(PM_BASE + 7)	/* Tell FS about the new user IDs */
#define		PM_SETUID_PROC	m1_i1		/* process */
#define		PM_SETUID_EGID	m1_i2		/* effective user id */
#define		PM_SETUID_RGID	m1_i3		/* real user id */
#define PM_FORK		(PM_BASE + 8)	/* Tell FS about the new process */
#define		PM_FORK_PPROC	m1_i1		/* parent process */
#define		PM_FORK_CPROC	m1_i2		/* child process */
#define		PM_FORK_CPID	m1_i3		/* child pid */
#define PM_EXIT		(PM_BASE + 9)	/* Tell FS about the exiting process */
#define		PM_EXIT_PROC	m1_i1		/* process */
#define PM_UNPAUSE	(PM_BASE + 10)	/* interrupted process */
#define		PM_UNPAUSE_PROC	m1_i1		/* process */
#define PM_REBOOT	(PM_BASE + 11)	/* Tell FS that we about to reboot */
#define PM_EXEC		(PM_BASE + 12)	/* Forward exec call to FS */
#define		PM_EXEC_PROC		m1_i1	/* process */
#define		PM_EXEC_PATH		m1_p1	/* executable */
#define		PM_EXEC_PATH_LEN	m1_i2	/* length of path including
						 * terminating nul
						 */
#define		PM_EXEC_FRAME		m1_p2	/* arguments and environment */
#define		PM_EXEC_FRAME_LEN	m1_i3	/* size of frame */
#define PM_FORK_NB	(PM_BASE + 13)	/* Tell FS about the fork_nb call */
#define PM_DUMPCORE	(PM_BASE + 14)	/* Ask FS to generate a core dump */
#define		PM_CORE_PROC		m1_i1
#define		PM_CORE_SEGPTR		m1_p1
#define PM_UNPAUSE_TR	(PM_BASE + 15)	/* interrupted process (for tracing) */
#define PM_EXIT_TR	(PM_BASE + 16)	/* Tell FS about the exiting process
					 * (for tracing)
					 */

/* Replies */
#define PM_EXIT_REPLY	(PM_BASE + 20)	/* Reply from FS */
#define PM_REBOOT_REPLY	(PM_BASE + 21)	/* Reply from FS */
#define PM_EXEC_REPLY	(PM_BASE + 22)	/* Reply from FS */
		/* PM_EXEC_PROC m1_i1 */
#define		PM_EXEC_STATUS m1_i2	/* OK or failure */
#define PM_CORE_REPLY	(PM_BASE + 23)	/* Reply from FS */
		/* PM_CORE_PROC m1_i1 */
#define		PM_CORE_STATUS m1_i2	/* OK or failure */
#define PM_EXIT_REPLY_TR (PM_BASE + 24)	/* Reply from FS */

/* Parameters for the EXEC_NEWMEM call */
#define EXC_NM_PROC	m1_i1		/* process that needs new map */
#define EXC_NM_PTR	m1_p1		/* parameters in struct exec_newmem */
/* Results:
 * the status will be in m_type.
 * the top of the stack will be in m1_i1.
 * the following flags will be in m1_i2:
 */
#define EXC_NM_RF_LOAD_TEXT	1	/* Load text segment (otherwise the
					 * text segment is already present)
					 */
#define EXC_NM_RF_ALLOW_SETUID	2	/* Setuid execution is allowed (tells
					 * FS to update its uid and gid 
					 * fields.
					 */

/* Parameters for the EXEC_RESTART call */
#define EXC_RS_PROC	m1_i1		/* process that needs to be restarted */
#define EXC_RS_RESULT	m1_i2		/* result of the exec */


#endif /* _MINIX_COM_H */