minix/drivers/ramdisk/proto

boot 
640 440
d--755 0 0
	bin d--755 0 0
		cdprobe ---755 0 0 cdprobe
		dev2name ---755 0 0 dev2name
		loadramdisk ---755 0 0 loadramdisk
		mount ---755 0 0 mount
		newroot ---755 0 0 newroot
		sh ---755 0 0 sh
		service ---755 0 0 service
		sysenv ---755 0 0 sysenv
	$
	sbin d--755 0 0
		@ACPI@
		ahci ---755 0 0 ahci
		at_wini ---755 0 0 at_wini
		bios_wini ---755 0 0 bios_wini
		ext2 ---755 0 0 ext2
		floppy ---755 0 0 floppy
		pci ---755 0 0 pci
		mfs ---755 0 0 mfs
		procfs ---755 0 0 procfs
	$
	dev d--755 0 0
@DEV@
	$
	etc d--755 0 0
		system.conf ---644 0 0 system.conf
		mtab ---644 0 0 mtab
		passwd ---644 0 0 passwd
		pwd.db ---644 0 0 pwd.db
		spwd.db ---600 0 0 spwd.db
		master.passwd ---600 0 0 master.passwd
		rc ---755 0 0 rc
		rs.single ---755 0 0 rs.single
	$
$
Initial root filesystem is now on a ramdisk that is part of the image. 2006-02-15 12:18:21 +01:00			`boot`
Build NetBSD libc library in world in ELF mode. 3 sets of libraries are built now: . ack: all libraries that ack can compile (/usr/lib/i386/) . clang+elf: all libraries with minix headers (/usr/lib/) . clang+elf: all libraries with netbsd headers (/usr/netbsd/) Once everything can be compiled with netbsd libraries and headers, the /usr/netbsd hierarchy will be obsolete and its libraries compiled with netbsd headers will be installed in /usr/lib, and its headers in /usr/include. (i.e. minix libc and current minix headers set will be gone.) To use the NetBSD libc system (libraries + headers) before it is the default libc, see: http://wiki.minix3.org/en/DevelopersGuide/UsingNetBSDCode This wiki page also documents the maintenance of the patch files of minix-specific changes to imported NetBSD code. Changes in this commit: . libsys: Add NBSD compilation and create a safe NBSD-based libc. . Port rest of libraries (except libddekit) to new header system. . Enable compilation of libddekit with new headers. . Enable kernel compilation with new headers. . Enable drivers compilation with new headers. . Port legacy commands to new headers and libc. . Port servers to new headers. . Add <sys/sigcontext.h> in compat library. . Remove dependency file in tree. . Enable compilation of common/lib/libc/atomic in libsys . Do not generate RCSID strings in libc. . Temporarily disable zoneinfo as they are incompatible with NetBSD format . obj-nbsd for .gitignore . Procfs: use only integer arithmetic. (Antoine Leca) . Increase ramdisk size to create NBSD-based images. . Remove INCSYMLINKS handling hack. . Add nbsd_include/sys/exec_elf.h . Enable ELF compilation with NBSD libc. . Add 'make nbsdsrc' in tools to download reference NetBSD sources. . Automate minix-port.patch creation. . Avoid using fstavfs() as it is extremely slow and unneeded. . Set err() as PRIVATE to avoid name clash with libc. . [NBSD] servers/vm: remove compilation warnings. . u32 is not a long in NBSD headers. . UPDATING info on netbsd hierarchy . commands fixes for netbsd libc 2011-04-27 15:00:52 +02:00			`640 440`
Initial root filesystem is now on a ramdisk that is part of the image. 2006-02-15 12:18:21 +01:00			`d--755 0 0`
			`bin d--755 0 0`
			`cdprobe ---755 0 0 cdprobe`
			`dev2name ---755 0 0 dev2name`
			`loadramdisk ---755 0 0 loadramdisk`
Replace newroot with a call to mount, will make type autodetect easier 2010-08-02 16:15:48 +02:00			`mount ---755 0 0 mount`
Initial root filesystem is now on a ramdisk that is part of the image. 2006-02-15 12:18:21 +01:00			`newroot ---755 0 0 newroot`
			`sh ---755 0 0 sh`
			`service ---755 0 0 service`
			`sysenv ---755 0 0 sysenv`
put mfs in /sbin, where mount expects it. 2007-01-24 16:50:04 +01:00			`$`
			`sbin d--755 0 0`
ACPI driver loaded at boot time - the acpi driver is part of the ramdisk and if present the rc script starts it before pci is started as pci needs if APIC mode is turned on. 2010-09-02 17:44:36 +02:00			`@ACPI@`
ramdisk: actually add ahci to the image, too 2010-08-11 13:30:08 +02:00			`ahci ---755 0 0 ahci`
Configure settings for system services dynamically with the new service edit command. 2010-07-05 21:37:08 +02:00			`at_wini ---755 0 0 at_wini`
			`bios_wini ---755 0 0 bios_wini`
This patch copies the ext2 server onto the initial ramdisk, the final patch to allow MINIX to boot from ext2. To create a setup with MINIX on ext2, follow these steps: - Assumptions: - there exists a primary partition c0dApB with a MINIX installation with GRUB support (/boot/image_latest exists on /dev/c0dApB) - there exists a free primary partition c0dCpD - Create an ext2 filesystem on c0dApB (from Linux, until Tthom has ported mke2fs) - Follow these steps (from a MINIX CD with ext2 support, another MINIX installation (not c0dApB) or Linux >= 2.6.35): mkdir /mnt/mfs /mnt/ext2 mount /dev/c0dApBs0 /mnt/mfs mount /dev/c0dApBs1 /mnt/mfs/home mount /dev/c0dApBs2 /mnt/mfs/usr mount /dev/c0dCpD /mnt/ext2 synctree -f /mnt/mfs /mnt/ext2 echo root=/dev/c0dCpD > /mnt/ext2/etc/fstab (note: no subpartitions used because that would confuse an unmodified bootloader) - Add the new MINIX installation to GRUB according to steps 7&8 in http://wiki.minix3.org/en/SummerOfCode2010/MultiBoot/HowTo 2010-08-04 07:18:03 +02:00			`ext2 ---755 0 0 ext2`
Configure settings for system services dynamically with the new service edit command. 2010-07-05 21:37:08 +02:00			`floppy ---755 0 0 floppy`
			`pci ---755 0 0 pci`
Merge of VFS by Balasz Gerofi with Minix trunk. 2006-10-25 15:40:36 +02:00			`mfs ---755 0 0 mfs`
ramdisk: Add procfs to ramdisk -Prevents kernel/procfs mismatches -Also, strip ELF binaries in ramdisk 2011-02-23 14:05:28 +01:00			`procfs ---755 0 0 procfs`
Initial root filesystem is now on a ramdisk that is part of the image. 2006-02-15 12:18:21 +01:00			`$`
			`dev d--755 0 0`
script to generate /dev part of proto file. 2006-04-03 17:01:43 +02:00			`@DEV@`
Initial root filesystem is now on a ramdisk that is part of the image. 2006-02-15 12:18:21 +01:00			`$`
			`etc d--755 0 0`
Drivers and servers are simply known as services. /etc CHANGES: - /etc/drivers.conf has been renamed to /etc/system.conf. Every entry in the file is now marked as "service" rather than driver. - user "service" has been added to password file /etc/passwd. - docs/UPDATING updated accordingly, as well as every other mention to the old drivers.conf in the system. RS CHANGES: - No more distinction between servers and drivers. - RS_START has been renamed to RS_UP and the old legacy RS_UP and RS_UP_COPY dropped. - RS asks PCI to set / remove ACL entries only for services whose ACL properties have been set. This change eliminates unnecessary warnings. - Temporarily minimize the risk of potential races at boot time or when starting a new service. Upcoming changes will eliminate races completely. - General cleanup. 2009-12-17 02:53:26 +01:00			`system.conf ---644 0 0 system.conf`
Initial root filesystem is now on a ramdisk that is part of the image. 2006-02-15 12:18:21 +01:00			`mtab ---644 0 0 mtab`
rs changes (also use driver configurations in the image ramdisk) 2006-10-31 14:35:04 +01:00			`passwd ---644 0 0 passwd`
ramdisk: install all password-related files 2011-11-22 18:17:25 +01:00			`pwd.db ---644 0 0 pwd.db`
			`spwd.db ---600 0 0 spwd.db`
			`master.passwd ---600 0 0 master.passwd`
Initial root filesystem is now on a ramdisk that is part of the image. 2006-02-15 12:18:21 +01:00			`rc ---755 0 0 rc`
Put rs.single on initial ramdisk to prevent potential race when readclock terminates early 2010-07-01 08:14:06 +02:00			`rs.single ---755 0 0 rs.single`
Initial root filesystem is now on a ramdisk that is part of the image. 2006-02-15 12:18:21 +01:00			`$`
			`$`