minix/drivers/ramdisk/proto

boot 
235 400
d--755 0 0
	bin d--755 0 0
		cdprobe ---755 0 0 cdprobe
		dev2name ---755 0 0 dev2name
		loadramdisk ---755 0 0 loadramdisk
		mount ---755 0 0 mount
		newroot ---755 0 0 newroot
		sh ---755 0 0 sh
		service ---755 0 0 service
		sysenv ---755 0 0 sysenv
	$
	sbin d--755 0 0
		at_wini ---755 0 0 at_wini
		bios_wini ---755 0 0 bios_wini
		ext2 ---755 0 0 ext2
		floppy ---755 0 0 floppy
		pci ---755 0 0 pci
		mfs ---755 0 0 mfs
	$
	dev d--755 0 0
@DEV@
	$
	etc d--755 0 0
		system.conf ---644 0 0 system.conf
		mtab ---644 0 0 mtab
		passwd ---644 0 0 passwd
		rc ---755 0 0 rc
		rs.single ---755 0 0 rs.single
	$
$
Initial root filesystem is now on a ramdisk that is part of the image. 2006-02-15 12:18:21 +01:00			`boot`
GCC build fixes/updates -Set stack sizes for boot image processes -Increase RS stack size -Reduce ramdisk size -HARDWARE task should use kernel stack -Minor asm tweaks for leading underscores 2010-05-26 20:45:55 +02:00			`235 400`
Initial root filesystem is now on a ramdisk that is part of the image. 2006-02-15 12:18:21 +01:00			`d--755 0 0`
			`bin d--755 0 0`
			`cdprobe ---755 0 0 cdprobe`
			`dev2name ---755 0 0 dev2name`
			`loadramdisk ---755 0 0 loadramdisk`
Replace newroot with a call to mount, will make type autodetect easier 2010-08-02 16:15:48 +02:00			`mount ---755 0 0 mount`
Initial root filesystem is now on a ramdisk that is part of the image. 2006-02-15 12:18:21 +01:00			`newroot ---755 0 0 newroot`
			`sh ---755 0 0 sh`
			`service ---755 0 0 service`
			`sysenv ---755 0 0 sysenv`
put mfs in /sbin, where mount expects it. 2007-01-24 16:50:04 +01:00			`$`
			`sbin d--755 0 0`
Configure settings for system services dynamically with the new service edit command. 2010-07-05 21:37:08 +02:00			`at_wini ---755 0 0 at_wini`
			`bios_wini ---755 0 0 bios_wini`
This patch copies the ext2 server onto the initial ramdisk, the final patch to allow MINIX to boot from ext2. To create a setup with MINIX on ext2, follow these steps: - Assumptions: - there exists a primary partition c0dApB with a MINIX installation with GRUB support (/boot/image_latest exists on /dev/c0dApB) - there exists a free primary partition c0dCpD - Create an ext2 filesystem on c0dApB (from Linux, until Tthom has ported mke2fs) - Follow these steps (from a MINIX CD with ext2 support, another MINIX installation (not c0dApB) or Linux >= 2.6.35): mkdir /mnt/mfs /mnt/ext2 mount /dev/c0dApBs0 /mnt/mfs mount /dev/c0dApBs1 /mnt/mfs/home mount /dev/c0dApBs2 /mnt/mfs/usr mount /dev/c0dCpD /mnt/ext2 synctree -f /mnt/mfs /mnt/ext2 echo root=/dev/c0dCpD > /mnt/ext2/etc/fstab (note: no subpartitions used because that would confuse an unmodified bootloader) - Add the new MINIX installation to GRUB according to steps 7&8 in http://wiki.minix3.org/en/SummerOfCode2010/MultiBoot/HowTo 2010-08-04 07:18:03 +02:00			`ext2 ---755 0 0 ext2`
Configure settings for system services dynamically with the new service edit command. 2010-07-05 21:37:08 +02:00			`floppy ---755 0 0 floppy`
			`pci ---755 0 0 pci`
Merge of VFS by Balasz Gerofi with Minix trunk. 2006-10-25 15:40:36 +02:00			`mfs ---755 0 0 mfs`
Initial root filesystem is now on a ramdisk that is part of the image. 2006-02-15 12:18:21 +01:00			`$`
			`dev d--755 0 0`
script to generate /dev part of proto file. 2006-04-03 17:01:43 +02:00			`@DEV@`
Initial root filesystem is now on a ramdisk that is part of the image. 2006-02-15 12:18:21 +01:00			`$`
			`etc d--755 0 0`
Drivers and servers are simply known as services. /etc CHANGES: - /etc/drivers.conf has been renamed to /etc/system.conf. Every entry in the file is now marked as "service" rather than driver. - user "service" has been added to password file /etc/passwd. - docs/UPDATING updated accordingly, as well as every other mention to the old drivers.conf in the system. RS CHANGES: - No more distinction between servers and drivers. - RS_START has been renamed to RS_UP and the old legacy RS_UP and RS_UP_COPY dropped. - RS asks PCI to set / remove ACL entries only for services whose ACL properties have been set. This change eliminates unnecessary warnings. - Temporarily minimize the risk of potential races at boot time or when starting a new service. Upcoming changes will eliminate races completely. - General cleanup. 2009-12-17 02:53:26 +01:00			`system.conf ---644 0 0 system.conf`
Initial root filesystem is now on a ramdisk that is part of the image. 2006-02-15 12:18:21 +01:00			`mtab ---644 0 0 mtab`
rs changes (also use driver configurations in the image ramdisk) 2006-10-31 14:35:04 +01:00			`passwd ---644 0 0 passwd`
Initial root filesystem is now on a ramdisk that is part of the image. 2006-02-15 12:18:21 +01:00			`rc ---755 0 0 rc`
Put rs.single on initial ramdisk to prevent potential race when readclock terminates early 2010-07-01 08:14:06 +02:00			`rs.single ---755 0 0 rs.single`
Initial root filesystem is now on a ramdisk that is part of the image. 2006-02-15 12:18:21 +01:00			`$`
			`$`