2005-09-04 22:08:22 +02:00
|
|
|
/*
|
|
|
|
* lance.c
|
|
|
|
*
|
|
|
|
* This file contains a ethernet device driver for AMD LANCE based ethernet
|
|
|
|
* cards.
|
|
|
|
*
|
|
|
|
* The valid messages and their parameters are:
|
|
|
|
*
|
Server/driver protocols: no longer allow third-party copies.
Before safecopies, the IO_ENDPT and DL_ENDPT message fields were needed
to know which actual process to copy data from/to, as that process may
not always be the caller. Now that we have full safecopy support, these
fields have become useless for that purpose: the owner of the grant is
*always* the caller. Allowing the caller to supply another endpoint is
in fact dangerous, because the callee may then end up using a grant
from a third party. One could call this a variant of the confused
deputy problem.
From now on, safecopy calls should always use the caller's endpoint as
grant owner. This fully obsoletes the DL_ENDPT field in the
inet/ethernet protocol. IO_ENDPT has other uses besides identifying the
grant owner though. This patch renames IO_ENDPT to USER_ENDPT, not only
because that is a more fitting name (it should never be used for I/O
after all), but also in order to intentionally break any old system
source code outside the base system. If this patch breaks your code,
fixing it is fairly simple:
- DL_ENDPT should be replaced with m_source;
- IO_ENDPT should be replaced with m_source when used for safecopies;
- IO_ENDPT should be replaced with USER_ENDPT for any other use, e.g.
when setting REP_ENDPT, matching requests in CANCEL calls, getting
DEV_SELECT flags, and retrieving of the real user process's endpoint
in DEV_OPEN.
The changes in this patch are binary backward compatible.
2011-04-11 19:35:05 +02:00
|
|
|
* m_type DL_COUNT DL_MODE DL_GRANT
|
|
|
|
* |--------------+----------+---------+---------|
|
|
|
|
* | DL_WRITEV_S | count | | grant |
|
|
|
|
* |--------------|----------|---------|---------|
|
|
|
|
* | DL_READV_S | count | | grant |
|
|
|
|
* |--------------|----------|---------|---------|
|
|
|
|
* | DL_CONF | | mode | |
|
|
|
|
* |--------------|----------|---------|---------|
|
|
|
|
* | DL_GETSTAT_S | | | grant |
|
|
|
|
* |--------------|----------|---------|---------|
|
|
|
|
* | hardware int | | | |
|
|
|
|
* |--------------|----------|---------|---------|
|
2005-09-04 22:08:22 +02:00
|
|
|
*
|
|
|
|
* The messages sent are:
|
|
|
|
*
|
2010-05-18 00:22:53 +02:00
|
|
|
* m_type DL_COUNT DL_FLAGS
|
|
|
|
* |---------------+----------+---------|
|
|
|
|
* | DL_TASK_REPLY | rd-count | flags |
|
|
|
|
* |---------------|----------|---------|
|
2005-09-04 22:08:22 +02:00
|
|
|
*
|
2010-05-18 00:22:53 +02:00
|
|
|
* m_type
|
|
|
|
* |---------------|
|
|
|
|
* | DL_STAT_REPLY |
|
|
|
|
* |---------------|
|
|
|
|
*
|
|
|
|
* m_type DL_STAT DL_ADDR
|
|
|
|
* |---------------+---------+---------------|
|
|
|
|
* | DL_CONF_REPLY | code | ethernet addr |
|
|
|
|
* |---------------|---------|---------------|
|
2005-09-04 22:08:22 +02:00
|
|
|
*
|
|
|
|
* Created: Jul 27, 2002 by Kazuya Kodama <kazuya@nii.ac.jp>
|
2005-09-05 20:01:56 +02:00
|
|
|
* Adapted for Minix 3: Sep 05, 2005 by Joren l'Ami <jwlami@cs.vu.nl>
|
2005-09-04 22:08:22 +02:00
|
|
|
*/
|
|
|
|
|
2009-07-22 14:36:19 +02:00
|
|
|
#define VERBOSE 0 /* Verbose debugging output */
|
|
|
|
#define LANCE_FKEY 0 /* Use function key to dump Lance stats */
|
2005-09-04 22:08:22 +02:00
|
|
|
|
2010-03-22 22:25:22 +01:00
|
|
|
#include <minix/drivers.h>
|
2010-04-08 15:41:35 +02:00
|
|
|
#include <minix/netdriver.h>
|
2005-09-04 22:08:22 +02:00
|
|
|
|
|
|
|
#include <net/hton.h>
|
|
|
|
#include <net/gen/ether.h>
|
|
|
|
#include <net/gen/eth_io.h>
|
|
|
|
#include <assert.h>
|
|
|
|
|
|
|
|
#include <minix/syslib.h>
|
2009-09-29 20:47:56 +02:00
|
|
|
#include <minix/endpoint.h>
|
2010-03-08 12:04:59 +01:00
|
|
|
#include <machine/pci.h>
|
2009-07-22 14:36:19 +02:00
|
|
|
#include <minix/ds.h>
|
2005-09-04 22:08:22 +02:00
|
|
|
|
|
|
|
#include "lance.h"
|
|
|
|
|
2010-05-18 00:22:53 +02:00
|
|
|
static ether_card_t ec_state;
|
|
|
|
static int ec_instance;
|
2005-09-04 22:08:22 +02:00
|
|
|
|
|
|
|
/* Configuration */
|
|
|
|
typedef struct ec_conf
|
|
|
|
{
|
2009-07-22 14:36:19 +02:00
|
|
|
port_t ec_port;
|
|
|
|
int ec_irq;
|
|
|
|
phys_bytes ec_mem;
|
2005-09-04 22:08:22 +02:00
|
|
|
} ec_conf_t;
|
|
|
|
|
|
|
|
/* We hardly use these. Just "LANCE0=on/off" "LANCE1=on/off" mean. */
|
2010-05-18 00:22:53 +02:00
|
|
|
#define EC_CONF_NR 3
|
|
|
|
ec_conf_t ec_conf[EC_CONF_NR]= /* Card addresses */
|
2005-09-04 22:08:22 +02:00
|
|
|
{
|
2010-05-18 00:22:53 +02:00
|
|
|
/* I/O port, IRQ, Buffer address. */
|
|
|
|
{ 0x1000, 9, 0x00000, },
|
|
|
|
{ 0xD000, 15, 0x00000, },
|
|
|
|
{ 0x0000, 0, 0x00000, },
|
2005-09-04 22:08:22 +02:00
|
|
|
};
|
|
|
|
|
|
|
|
/* General */
|
2012-03-24 16:16:34 +01:00
|
|
|
static void do_init(message *mp);
|
|
|
|
static void ec_init(ether_card_t *ec);
|
|
|
|
static void ec_confaddr(ether_card_t *ec);
|
|
|
|
static void ec_reinit(ether_card_t *ec);
|
|
|
|
static void ec_check_ints(ether_card_t *ec);
|
|
|
|
static void conf_hw(ether_card_t *ec);
|
|
|
|
static void update_conf(ether_card_t *ec, ec_conf_t *ecp);
|
|
|
|
static void mess_reply(message *req, message *reply);
|
|
|
|
static void do_int(ether_card_t *ec);
|
|
|
|
static void reply(ether_card_t *ec);
|
|
|
|
static void ec_reset(ether_card_t *ec);
|
|
|
|
static void ec_send(ether_card_t *ec);
|
|
|
|
static void ec_recv(ether_card_t *ec);
|
|
|
|
static void do_vwrite_s(message *mp, int from_int);
|
|
|
|
static void do_vread_s(const message *mp);
|
|
|
|
static void ec_user2nic(ether_card_t *dep, iovec_dat_t *iovp, vir_bytes
|
|
|
|
offset, int nic_addr, vir_bytes count);
|
|
|
|
static void ec_nic2user(ether_card_t *ec, int nic_addr, iovec_dat_t
|
|
|
|
*iovp, vir_bytes offset, vir_bytes count);
|
|
|
|
static int calc_iovec_size(iovec_dat_t *iovp);
|
|
|
|
static void ec_next_iovec(iovec_dat_t *iovp);
|
|
|
|
static void do_getstat_s(message *mp);
|
|
|
|
static void lance_stop(ether_card_t *ec);
|
|
|
|
|
|
|
|
static void lance_dump(void);
|
|
|
|
static void getAddressing(int devind, ether_card_t *ec);
|
2005-09-04 22:08:22 +02:00
|
|
|
|
|
|
|
/* probe+init LANCE cards */
|
2012-03-24 16:16:34 +01:00
|
|
|
static int lance_probe(ether_card_t *ec, int skip);
|
|
|
|
static void lance_init_card(ether_card_t *ec);
|
2005-09-04 22:08:22 +02:00
|
|
|
|
2009-07-22 14:36:19 +02:00
|
|
|
/* Accesses Lance Control and Status Registers */
|
2012-03-24 16:16:34 +01:00
|
|
|
static u8_t in_byte(port_t port);
|
|
|
|
static u16_t in_word(port_t port);
|
|
|
|
static void out_word(port_t port, u16_t value);
|
|
|
|
static u16_t read_csr(port_t ioaddr, u16_t csrno);
|
|
|
|
static void write_csr(port_t ioaddr, u16_t csrno, u16_t value);
|
2009-07-22 14:36:19 +02:00
|
|
|
|
2005-09-04 22:08:22 +02:00
|
|
|
/* --- LANCE --- */
|
|
|
|
/* General */
|
2010-05-18 00:22:53 +02:00
|
|
|
typedef unsigned long Address;
|
2005-09-04 22:08:22 +02:00
|
|
|
|
|
|
|
#define virt_to_bus(x) (vir2phys((unsigned long)x))
|
|
|
|
unsigned long vir2phys( unsigned long x )
|
|
|
|
{
|
2009-07-22 14:36:19 +02:00
|
|
|
int r;
|
|
|
|
unsigned long value;
|
|
|
|
|
|
|
|
if ( (r=sys_umap( SELF, VM_D, x, 4, &value )) != OK ) {
|
|
|
|
printf("lance: umap of 0x%lx failed\n",x );
|
2010-03-05 16:05:11 +01:00
|
|
|
panic("sys_umap failed: %d", r);
|
2009-07-22 14:36:19 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
return value;
|
2005-09-04 22:08:22 +02:00
|
|
|
}
|
|
|
|
|
2005-09-05 20:01:56 +02:00
|
|
|
/* DMA limitations */
|
2009-07-22 14:36:19 +02:00
|
|
|
#define DMA_ADDR_MASK 0xFFFFFF /* mask to verify DMA address is 24-bit */
|
2005-09-05 20:01:56 +02:00
|
|
|
|
2008-11-19 13:26:10 +01:00
|
|
|
#define CORRECT_DMA_MEM() ( (virt_to_bus(lance_buf + sizeof(struct lance_interface)) & ~DMA_ADDR_MASK) == 0 )
|
2005-09-04 22:08:22 +02:00
|
|
|
|
|
|
|
#define ETH_FRAME_LEN 1518
|
|
|
|
|
|
|
|
#define LANCE_MUST_PAD 0x00000001
|
|
|
|
#define LANCE_ENABLE_AUTOSELECT 0x00000002
|
|
|
|
#define LANCE_SELECT_PHONELINE 0x00000004
|
|
|
|
#define LANCE_MUST_UNRESET 0x00000008
|
|
|
|
|
|
|
|
static const struct lance_chip_type
|
|
|
|
{
|
2009-07-22 14:36:19 +02:00
|
|
|
int id_number;
|
|
|
|
const char *name;
|
|
|
|
int flags;
|
2005-09-04 22:08:22 +02:00
|
|
|
} chip_table[] = {
|
2009-07-22 14:36:19 +02:00
|
|
|
{0x0000, "LANCE 7990", /* Ancient lance chip. */
|
|
|
|
LANCE_MUST_PAD + LANCE_MUST_UNRESET},
|
|
|
|
{0x0003, "PCnet/ISA 79C960", /* 79C960 PCnet/ISA. */
|
|
|
|
LANCE_ENABLE_AUTOSELECT},
|
|
|
|
{0x2260, "PCnet/ISA+ 79C961", /* 79C961 PCnet/ISA+, Plug-n-Play. */
|
|
|
|
LANCE_ENABLE_AUTOSELECT},
|
|
|
|
{0x2420, "PCnet/PCI 79C970", /* 79C970 or 79C974 PCnet-SCSI, PCI. */
|
|
|
|
LANCE_ENABLE_AUTOSELECT},
|
|
|
|
{0x2430, "PCnet32", /* 79C965 PCnet for VL bus. */
|
|
|
|
LANCE_ENABLE_AUTOSELECT},
|
|
|
|
{0x2621, "PCnet/PCI-II 79C970A", /* 79C970A PCInetPCI II. */
|
|
|
|
LANCE_ENABLE_AUTOSELECT},
|
|
|
|
{0x2625, "PCnet-FAST III 79C973",/* 79C973 PCInet-FAST III. */
|
|
|
|
LANCE_ENABLE_AUTOSELECT},
|
|
|
|
{0x2626, "PCnet/HomePNA 79C978",
|
|
|
|
LANCE_ENABLE_AUTOSELECT|LANCE_SELECT_PHONELINE},
|
|
|
|
{0x0, "PCnet (unknown)",
|
|
|
|
LANCE_ENABLE_AUTOSELECT},
|
2005-09-04 22:08:22 +02:00
|
|
|
};
|
|
|
|
|
|
|
|
/* ############## for LANCE device ############## */
|
|
|
|
#define LANCE_ETH_ADDR 0x0
|
|
|
|
#define LANCE_DATA 0x10
|
|
|
|
#define LANCE_ADDR 0x12
|
|
|
|
#define LANCE_RESET 0x14
|
|
|
|
#define LANCE_BUS_IF 0x16
|
|
|
|
#define LANCE_TOTAL_SIZE 0x18
|
|
|
|
|
|
|
|
/* Use 2^4=16 {Rx,Tx} buffers */
|
|
|
|
#define LANCE_LOG_RX_BUFFERS 4
|
|
|
|
#define RX_RING_SIZE (1 << (LANCE_LOG_RX_BUFFERS))
|
|
|
|
#define RX_RING_MOD_MASK (RX_RING_SIZE - 1)
|
|
|
|
#define RX_RING_LEN_BITS ((LANCE_LOG_RX_BUFFERS) << 29)
|
|
|
|
|
|
|
|
#define LANCE_LOG_TX_BUFFERS 4
|
|
|
|
#define TX_RING_SIZE (1 << (LANCE_LOG_TX_BUFFERS))
|
|
|
|
#define TX_RING_MOD_MASK (TX_RING_SIZE - 1)
|
|
|
|
#define TX_RING_LEN_BITS ((LANCE_LOG_TX_BUFFERS) << 29)
|
|
|
|
|
|
|
|
/* for lance_interface */
|
|
|
|
struct lance_init_block
|
|
|
|
{
|
2009-07-22 14:36:19 +02:00
|
|
|
unsigned short mode;
|
|
|
|
unsigned char phys_addr[6];
|
|
|
|
unsigned long filter[2];
|
|
|
|
Address rx_ring;
|
|
|
|
Address tx_ring;
|
2005-09-04 22:08:22 +02:00
|
|
|
};
|
|
|
|
|
|
|
|
struct lance_rx_head
|
|
|
|
{
|
2009-07-22 14:36:19 +02:00
|
|
|
union {
|
|
|
|
Address base;
|
|
|
|
unsigned char addr[4];
|
|
|
|
} u;
|
|
|
|
short buf_length; /* 2s complement */
|
|
|
|
short msg_length;
|
2005-09-04 22:08:22 +02:00
|
|
|
};
|
|
|
|
|
|
|
|
struct lance_tx_head
|
|
|
|
{
|
2009-07-22 14:36:19 +02:00
|
|
|
union {
|
|
|
|
Address base;
|
|
|
|
unsigned char addr[4];
|
|
|
|
} u;
|
|
|
|
short buf_length; /* 2s complement */
|
|
|
|
short misc;
|
2005-09-04 22:08:22 +02:00
|
|
|
};
|
|
|
|
|
|
|
|
struct lance_interface
|
|
|
|
{
|
2009-07-22 14:36:19 +02:00
|
|
|
struct lance_init_block init_block;
|
|
|
|
struct lance_rx_head rx_ring[RX_RING_SIZE];
|
|
|
|
struct lance_tx_head tx_ring[TX_RING_SIZE];
|
|
|
|
unsigned char rbuf[RX_RING_SIZE][ETH_FRAME_LEN];
|
|
|
|
unsigned char tbuf[TX_RING_SIZE][ETH_FRAME_LEN];
|
2005-09-04 22:08:22 +02:00
|
|
|
};
|
|
|
|
|
|
|
|
/* =============== global variables =============== */
|
2010-05-18 00:22:53 +02:00
|
|
|
/* AKA the stuff that really should have been in ether_card_t */
|
2005-09-04 22:08:22 +02:00
|
|
|
static struct lance_interface *lp;
|
2008-11-19 13:26:10 +01:00
|
|
|
#define LANCE_BUF_SIZE (sizeof(struct lance_interface))
|
|
|
|
static char *lance_buf = NULL;
|
2005-09-04 22:08:22 +02:00
|
|
|
static int rx_slot_nr = 0; /* Rx-slot number */
|
|
|
|
static int tx_slot_nr = 0; /* Tx-slot number */
|
|
|
|
static int cur_tx_slot_nr = 0; /* Tx-slot number */
|
|
|
|
static char isstored[TX_RING_SIZE]; /* Tx-slot in-use */
|
|
|
|
|
2008-12-17 02:20:15 +01:00
|
|
|
phys_bytes lance_buf_phys;
|
Basic System Event Framework (SEF) with ping and live update.
SYSLIB CHANGES:
- SEF must be used by every system process and is thereby part of the system
library.
- The framework provides a receive() interface (sef_receive) for system
processes to automatically catch known system even messages and process them.
- SEF provides a default behavior for each type of system event, but allows
system processes to register callbacks to override the default behavior.
- Custom (local to the process) or predefined (provided by SEF) callback
implementations can be registered to SEF.
- SEF currently includes support for 2 types of system events:
1. SEF Ping. The event occurs every time RS sends a ping to figure out
whether a system process is still alive. The default callback implementation
provided by SEF is to notify RS back to let it know the process is alive
and kicking.
2. SEF Live update. The event occurs every time RS sends a prepare to update
message to let a system process know an update is available and to prepare
for it. The live update support is very basic for now. SEF only deals with
verifying if the prepare state can be supported by the process, dumping the
state for debugging purposes, and providing an event-driven programming
model to the process to react to state changes check-in when ready to update.
- SEF should be extended in the future to integrate support for more types of
system events. Ideally, all the cross-cutting concerns should be integrated into
SEF to avoid duplicating code and ease extensibility. Examples include:
* PM notify messages primarily used at shutdown.
* SYSTEM notify messages primarily used for signals.
* CLOCK notify messages used for system alarms.
* Debug messages. IS could still be in charge of fkey handling but would
forward the debug message to the target process (e.g. PM, if the user
requested debug information about PM). SEF would then catch the message and
do nothing unless the process has registered an appropriate callback to
deal with the event. This simplifies the programming model to print debug
information, avoids duplicating code, and reduces the effort to print
debug information.
SYSTEM PROCESSES CHANGES:
- Every system process registers SEF callbacks it needs to override the default
system behavior and calls sef_startup() right after being started.
- sef_startup() does almost nothing now, but will be extended in the future to
support callbacks of its own to let RS control and synchronize with every
system process at initialization time.
- Every system process calls sef_receive() now rather than receive() directly,
to let SEF handle predefined system events.
RS CHANGES:
- RS supports a basic single-component live update protocol now, as follows:
* When an update command is issued (via "service update *"), RS notifies the
target system process to prepare for a specific update state.
* If the process doesn't respond back in time, the update is aborted.
* When the process responds back, RS kills it and marks it for refreshing.
* The process is then automatically restarted as for a buggy process and can
start running again.
* Live update is currently prototyped as a controlled failure.
2009-12-21 15:12:21 +01:00
|
|
|
|
|
|
|
/* SEF functions and variables. */
|
2012-03-25 20:25:53 +02:00
|
|
|
static void sef_local_startup(void);
|
|
|
|
static int sef_cb_init_fresh(int type, sef_init_info_t *info);
|
|
|
|
static void sef_cb_signal_handler(int signo);
|
Basic System Event Framework (SEF) with ping and live update.
SYSLIB CHANGES:
- SEF must be used by every system process and is thereby part of the system
library.
- The framework provides a receive() interface (sef_receive) for system
processes to automatically catch known system even messages and process them.
- SEF provides a default behavior for each type of system event, but allows
system processes to register callbacks to override the default behavior.
- Custom (local to the process) or predefined (provided by SEF) callback
implementations can be registered to SEF.
- SEF currently includes support for 2 types of system events:
1. SEF Ping. The event occurs every time RS sends a ping to figure out
whether a system process is still alive. The default callback implementation
provided by SEF is to notify RS back to let it know the process is alive
and kicking.
2. SEF Live update. The event occurs every time RS sends a prepare to update
message to let a system process know an update is available and to prepare
for it. The live update support is very basic for now. SEF only deals with
verifying if the prepare state can be supported by the process, dumping the
state for debugging purposes, and providing an event-driven programming
model to the process to react to state changes check-in when ready to update.
- SEF should be extended in the future to integrate support for more types of
system events. Ideally, all the cross-cutting concerns should be integrated into
SEF to avoid duplicating code and ease extensibility. Examples include:
* PM notify messages primarily used at shutdown.
* SYSTEM notify messages primarily used for signals.
* CLOCK notify messages used for system alarms.
* Debug messages. IS could still be in charge of fkey handling but would
forward the debug message to the target process (e.g. PM, if the user
requested debug information about PM). SEF would then catch the message and
do nothing unless the process has registered an appropriate callback to
deal with the event. This simplifies the programming model to print debug
information, avoids duplicating code, and reduces the effort to print
debug information.
SYSTEM PROCESSES CHANGES:
- Every system process registers SEF callbacks it needs to override the default
system behavior and calls sef_startup() right after being started.
- sef_startup() does almost nothing now, but will be extended in the future to
support callbacks of its own to let RS control and synchronize with every
system process at initialization time.
- Every system process calls sef_receive() now rather than receive() directly,
to let SEF handle predefined system events.
RS CHANGES:
- RS supports a basic single-component live update protocol now, as follows:
* When an update command is issued (via "service update *"), RS notifies the
target system process to prepare for a specific update state.
* If the process doesn't respond back in time, the update is aborted.
* When the process responds back, RS kills it and marks it for refreshing.
* The process is then automatically restarted as for a buggy process and can
start running again.
* Live update is currently prototyped as a controlled failure.
2009-12-21 15:12:21 +01:00
|
|
|
|
2005-09-04 22:08:22 +02:00
|
|
|
/*===========================================================================*
|
2009-07-22 14:36:19 +02:00
|
|
|
* main *
|
2005-09-04 22:08:22 +02:00
|
|
|
*===========================================================================*/
|
2010-05-18 00:22:53 +02:00
|
|
|
int main( int argc, char **argv )
|
2005-09-04 22:08:22 +02:00
|
|
|
{
|
2009-07-22 14:36:19 +02:00
|
|
|
message m;
|
2010-04-08 15:41:35 +02:00
|
|
|
int ipc_status;
|
2010-05-18 00:22:53 +02:00
|
|
|
int r;
|
2009-07-22 14:36:19 +02:00
|
|
|
ether_card_t *ec;
|
2005-09-04 22:08:22 +02:00
|
|
|
|
Basic System Event Framework (SEF) with ping and live update.
SYSLIB CHANGES:
- SEF must be used by every system process and is thereby part of the system
library.
- The framework provides a receive() interface (sef_receive) for system
processes to automatically catch known system even messages and process them.
- SEF provides a default behavior for each type of system event, but allows
system processes to register callbacks to override the default behavior.
- Custom (local to the process) or predefined (provided by SEF) callback
implementations can be registered to SEF.
- SEF currently includes support for 2 types of system events:
1. SEF Ping. The event occurs every time RS sends a ping to figure out
whether a system process is still alive. The default callback implementation
provided by SEF is to notify RS back to let it know the process is alive
and kicking.
2. SEF Live update. The event occurs every time RS sends a prepare to update
message to let a system process know an update is available and to prepare
for it. The live update support is very basic for now. SEF only deals with
verifying if the prepare state can be supported by the process, dumping the
state for debugging purposes, and providing an event-driven programming
model to the process to react to state changes check-in when ready to update.
- SEF should be extended in the future to integrate support for more types of
system events. Ideally, all the cross-cutting concerns should be integrated into
SEF to avoid duplicating code and ease extensibility. Examples include:
* PM notify messages primarily used at shutdown.
* SYSTEM notify messages primarily used for signals.
* CLOCK notify messages used for system alarms.
* Debug messages. IS could still be in charge of fkey handling but would
forward the debug message to the target process (e.g. PM, if the user
requested debug information about PM). SEF would then catch the message and
do nothing unless the process has registered an appropriate callback to
deal with the event. This simplifies the programming model to print debug
information, avoids duplicating code, and reduces the effort to print
debug information.
SYSTEM PROCESSES CHANGES:
- Every system process registers SEF callbacks it needs to override the default
system behavior and calls sef_startup() right after being started.
- sef_startup() does almost nothing now, but will be extended in the future to
support callbacks of its own to let RS control and synchronize with every
system process at initialization time.
- Every system process calls sef_receive() now rather than receive() directly,
to let SEF handle predefined system events.
RS CHANGES:
- RS supports a basic single-component live update protocol now, as follows:
* When an update command is issued (via "service update *"), RS notifies the
target system process to prepare for a specific update state.
* If the process doesn't respond back in time, the update is aborted.
* When the process responds back, RS kills it and marks it for refreshing.
* The process is then automatically restarted as for a buggy process and can
start running again.
* Live update is currently prototyped as a controlled failure.
2009-12-21 15:12:21 +01:00
|
|
|
/* SEF local startup. */
|
Initialization protocol for system services.
SYSLIB CHANGES:
- SEF framework now supports a new SEF Init request type from RS. 3 different
callbacks are available (init_fresh, init_lu, init_restart) to specify
initialization code when a service starts fresh, starts after a live update,
or restarts.
SYSTEM SERVICE CHANGES:
- Initialization code for system services is now enclosed in a callback SEF will
automatically call at init time. The return code of the callback will
tell RS whether the initialization completed successfully.
- Each init callback can access information passed by RS to initialize. As of
now, each system service has access to the public entries of RS's system process
table to gather all the information required to initialize. This design
eliminates many existing or potential races at boot time and provides a uniform
initialization interface to system services. The same interface will be reused
for the upcoming publish/subscribe model to handle dynamic
registration / deregistration of system services.
VM CHANGES:
- Uniform privilege management for all system services. Every service uses the
same call mask format. For boot services, VM copies the call mask from init
data. For dynamic services, VM still receives the call mask via rs_set_priv
call that will be soon replaced by the upcoming publish/subscribe model.
RS CHANGES:
- The system process table has been reorganized and split into private entries
and public entries. Only the latter ones are exposed to system services.
- VM call masks are now entirely configured in rs/table.c
- RS has now its own slot in the system process table. Only kernel tasks and
user processes not included in the boot image are now left out from the system
process table.
- RS implements the initialization protocol for system services.
- For services in the boot image, RS blocks till initialization is complete and
panics when failure is reported back. Services are initialized in their order of
appearance in the boot image priv table and RS blocks to implements synchronous
initialization for every system service having the flag SF_SYNCH_BOOT set.
- For services started dynamically, the initialization protocol is implemented
as though it were the first ping for the service. In this case, if the
system service fails to report back (or reports failure), RS brings the service
down rather than trying to restart it.
2010-01-08 02:20:42 +01:00
|
|
|
env_setargs(argc, argv);
|
Basic System Event Framework (SEF) with ping and live update.
SYSLIB CHANGES:
- SEF must be used by every system process and is thereby part of the system
library.
- The framework provides a receive() interface (sef_receive) for system
processes to automatically catch known system even messages and process them.
- SEF provides a default behavior for each type of system event, but allows
system processes to register callbacks to override the default behavior.
- Custom (local to the process) or predefined (provided by SEF) callback
implementations can be registered to SEF.
- SEF currently includes support for 2 types of system events:
1. SEF Ping. The event occurs every time RS sends a ping to figure out
whether a system process is still alive. The default callback implementation
provided by SEF is to notify RS back to let it know the process is alive
and kicking.
2. SEF Live update. The event occurs every time RS sends a prepare to update
message to let a system process know an update is available and to prepare
for it. The live update support is very basic for now. SEF only deals with
verifying if the prepare state can be supported by the process, dumping the
state for debugging purposes, and providing an event-driven programming
model to the process to react to state changes check-in when ready to update.
- SEF should be extended in the future to integrate support for more types of
system events. Ideally, all the cross-cutting concerns should be integrated into
SEF to avoid duplicating code and ease extensibility. Examples include:
* PM notify messages primarily used at shutdown.
* SYSTEM notify messages primarily used for signals.
* CLOCK notify messages used for system alarms.
* Debug messages. IS could still be in charge of fkey handling but would
forward the debug message to the target process (e.g. PM, if the user
requested debug information about PM). SEF would then catch the message and
do nothing unless the process has registered an appropriate callback to
deal with the event. This simplifies the programming model to print debug
information, avoids duplicating code, and reduces the effort to print
debug information.
SYSTEM PROCESSES CHANGES:
- Every system process registers SEF callbacks it needs to override the default
system behavior and calls sef_startup() right after being started.
- sef_startup() does almost nothing now, but will be extended in the future to
support callbacks of its own to let RS control and synchronize with every
system process at initialization time.
- Every system process calls sef_receive() now rather than receive() directly,
to let SEF handle predefined system events.
RS CHANGES:
- RS supports a basic single-component live update protocol now, as follows:
* When an update command is issued (via "service update *"), RS notifies the
target system process to prepare for a specific update state.
* If the process doesn't respond back in time, the update is aborted.
* When the process responds back, RS kills it and marks it for refreshing.
* The process is then automatically restarted as for a buggy process and can
start running again.
* Live update is currently prototyped as a controlled failure.
2009-12-21 15:12:21 +01:00
|
|
|
sef_local_startup();
|
|
|
|
|
2010-05-18 00:22:53 +02:00
|
|
|
ec= &ec_state;
|
|
|
|
|
2009-07-22 14:36:19 +02:00
|
|
|
while (TRUE)
|
|
|
|
{
|
2010-05-18 00:22:53 +02:00
|
|
|
if (ec->ec_irq != 0)
|
|
|
|
sys_irqenable(&ec->ec_hook);
|
2009-07-22 14:36:19 +02:00
|
|
|
|
2010-04-08 15:41:35 +02:00
|
|
|
if ((r= netdriver_receive(ANY, &m, &ipc_status)) != OK)
|
|
|
|
panic("netdriver_receive failed: %d", r);
|
Basic System Event Framework (SEF) with ping and live update.
SYSLIB CHANGES:
- SEF must be used by every system process and is thereby part of the system
library.
- The framework provides a receive() interface (sef_receive) for system
processes to automatically catch known system even messages and process them.
- SEF provides a default behavior for each type of system event, but allows
system processes to register callbacks to override the default behavior.
- Custom (local to the process) or predefined (provided by SEF) callback
implementations can be registered to SEF.
- SEF currently includes support for 2 types of system events:
1. SEF Ping. The event occurs every time RS sends a ping to figure out
whether a system process is still alive. The default callback implementation
provided by SEF is to notify RS back to let it know the process is alive
and kicking.
2. SEF Live update. The event occurs every time RS sends a prepare to update
message to let a system process know an update is available and to prepare
for it. The live update support is very basic for now. SEF only deals with
verifying if the prepare state can be supported by the process, dumping the
state for debugging purposes, and providing an event-driven programming
model to the process to react to state changes check-in when ready to update.
- SEF should be extended in the future to integrate support for more types of
system events. Ideally, all the cross-cutting concerns should be integrated into
SEF to avoid duplicating code and ease extensibility. Examples include:
* PM notify messages primarily used at shutdown.
* SYSTEM notify messages primarily used for signals.
* CLOCK notify messages used for system alarms.
* Debug messages. IS could still be in charge of fkey handling but would
forward the debug message to the target process (e.g. PM, if the user
requested debug information about PM). SEF would then catch the message and
do nothing unless the process has registered an appropriate callback to
deal with the event. This simplifies the programming model to print debug
information, avoids duplicating code, and reduces the effort to print
debug information.
SYSTEM PROCESSES CHANGES:
- Every system process registers SEF callbacks it needs to override the default
system behavior and calls sef_startup() right after being started.
- sef_startup() does almost nothing now, but will be extended in the future to
support callbacks of its own to let RS control and synchronize with every
system process at initialization time.
- Every system process calls sef_receive() now rather than receive() directly,
to let SEF handle predefined system events.
RS CHANGES:
- RS supports a basic single-component live update protocol now, as follows:
* When an update command is issued (via "service update *"), RS notifies the
target system process to prepare for a specific update state.
* If the process doesn't respond back in time, the update is aborted.
* When the process responds back, RS kills it and marks it for refreshing.
* The process is then automatically restarted as for a buggy process and can
start running again.
* Live update is currently prototyped as a controlled failure.
2009-12-21 15:12:21 +01:00
|
|
|
|
2010-05-18 00:22:53 +02:00
|
|
|
if (ec->ec_irq != 0)
|
|
|
|
sys_irqdisable(&ec->ec_hook);
|
2009-09-29 20:47:56 +02:00
|
|
|
|
2010-04-08 15:41:35 +02:00
|
|
|
if (is_ipc_notify(ipc_status)) {
|
2009-09-29 20:47:56 +02:00
|
|
|
switch(_ENDPOINT_P(m.m_source)) {
|
|
|
|
case TTY_PROC_NR:
|
|
|
|
lance_dump();
|
|
|
|
break;
|
|
|
|
case HARDWARE:
|
2010-05-18 00:22:53 +02:00
|
|
|
if (ec->mode == EC_ENABLED)
|
2009-09-29 20:47:56 +02:00
|
|
|
{
|
2010-05-18 00:22:53 +02:00
|
|
|
ec->ec_int_pending = 0;
|
|
|
|
ec_check_ints(ec);
|
|
|
|
do_int(ec);
|
2009-09-29 20:47:56 +02:00
|
|
|
}
|
|
|
|
break;
|
|
|
|
default:
|
2010-03-05 16:05:11 +01:00
|
|
|
panic("illegal notify source: %d", m.m_source);
|
2009-09-29 20:47:56 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
/* get next message */
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
|
2009-07-22 14:36:19 +02:00
|
|
|
switch (m.m_type)
|
|
|
|
{
|
|
|
|
case DL_WRITEV_S:
|
|
|
|
do_vwrite_s(&m, FALSE);
|
|
|
|
break;
|
|
|
|
case DL_READV_S:
|
|
|
|
do_vread_s(&m);
|
|
|
|
break;
|
|
|
|
case DL_CONF:
|
|
|
|
do_init(&m);
|
|
|
|
break;
|
|
|
|
case DL_GETSTAT_S:
|
|
|
|
do_getstat_s(&m);
|
|
|
|
break;
|
2005-09-04 22:08:22 +02:00
|
|
|
default:
|
2010-03-05 16:05:11 +01:00
|
|
|
panic("illegal message: %d", m.m_type);
|
2005-09-04 22:08:22 +02:00
|
|
|
}
|
2009-07-22 14:36:19 +02:00
|
|
|
}
|
2010-05-18 00:22:53 +02:00
|
|
|
|
|
|
|
return 0;
|
2005-09-04 22:08:22 +02:00
|
|
|
}
|
|
|
|
|
Basic System Event Framework (SEF) with ping and live update.
SYSLIB CHANGES:
- SEF must be used by every system process and is thereby part of the system
library.
- The framework provides a receive() interface (sef_receive) for system
processes to automatically catch known system even messages and process them.
- SEF provides a default behavior for each type of system event, but allows
system processes to register callbacks to override the default behavior.
- Custom (local to the process) or predefined (provided by SEF) callback
implementations can be registered to SEF.
- SEF currently includes support for 2 types of system events:
1. SEF Ping. The event occurs every time RS sends a ping to figure out
whether a system process is still alive. The default callback implementation
provided by SEF is to notify RS back to let it know the process is alive
and kicking.
2. SEF Live update. The event occurs every time RS sends a prepare to update
message to let a system process know an update is available and to prepare
for it. The live update support is very basic for now. SEF only deals with
verifying if the prepare state can be supported by the process, dumping the
state for debugging purposes, and providing an event-driven programming
model to the process to react to state changes check-in when ready to update.
- SEF should be extended in the future to integrate support for more types of
system events. Ideally, all the cross-cutting concerns should be integrated into
SEF to avoid duplicating code and ease extensibility. Examples include:
* PM notify messages primarily used at shutdown.
* SYSTEM notify messages primarily used for signals.
* CLOCK notify messages used for system alarms.
* Debug messages. IS could still be in charge of fkey handling but would
forward the debug message to the target process (e.g. PM, if the user
requested debug information about PM). SEF would then catch the message and
do nothing unless the process has registered an appropriate callback to
deal with the event. This simplifies the programming model to print debug
information, avoids duplicating code, and reduces the effort to print
debug information.
SYSTEM PROCESSES CHANGES:
- Every system process registers SEF callbacks it needs to override the default
system behavior and calls sef_startup() right after being started.
- sef_startup() does almost nothing now, but will be extended in the future to
support callbacks of its own to let RS control and synchronize with every
system process at initialization time.
- Every system process calls sef_receive() now rather than receive() directly,
to let SEF handle predefined system events.
RS CHANGES:
- RS supports a basic single-component live update protocol now, as follows:
* When an update command is issued (via "service update *"), RS notifies the
target system process to prepare for a specific update state.
* If the process doesn't respond back in time, the update is aborted.
* When the process responds back, RS kills it and marks it for refreshing.
* The process is then automatically restarted as for a buggy process and can
start running again.
* Live update is currently prototyped as a controlled failure.
2009-12-21 15:12:21 +01:00
|
|
|
/*===========================================================================*
|
|
|
|
* sef_local_startup *
|
|
|
|
*===========================================================================*/
|
2012-03-25 20:25:53 +02:00
|
|
|
static void sef_local_startup()
|
Basic System Event Framework (SEF) with ping and live update.
SYSLIB CHANGES:
- SEF must be used by every system process and is thereby part of the system
library.
- The framework provides a receive() interface (sef_receive) for system
processes to automatically catch known system even messages and process them.
- SEF provides a default behavior for each type of system event, but allows
system processes to register callbacks to override the default behavior.
- Custom (local to the process) or predefined (provided by SEF) callback
implementations can be registered to SEF.
- SEF currently includes support for 2 types of system events:
1. SEF Ping. The event occurs every time RS sends a ping to figure out
whether a system process is still alive. The default callback implementation
provided by SEF is to notify RS back to let it know the process is alive
and kicking.
2. SEF Live update. The event occurs every time RS sends a prepare to update
message to let a system process know an update is available and to prepare
for it. The live update support is very basic for now. SEF only deals with
verifying if the prepare state can be supported by the process, dumping the
state for debugging purposes, and providing an event-driven programming
model to the process to react to state changes check-in when ready to update.
- SEF should be extended in the future to integrate support for more types of
system events. Ideally, all the cross-cutting concerns should be integrated into
SEF to avoid duplicating code and ease extensibility. Examples include:
* PM notify messages primarily used at shutdown.
* SYSTEM notify messages primarily used for signals.
* CLOCK notify messages used for system alarms.
* Debug messages. IS could still be in charge of fkey handling but would
forward the debug message to the target process (e.g. PM, if the user
requested debug information about PM). SEF would then catch the message and
do nothing unless the process has registered an appropriate callback to
deal with the event. This simplifies the programming model to print debug
information, avoids duplicating code, and reduces the effort to print
debug information.
SYSTEM PROCESSES CHANGES:
- Every system process registers SEF callbacks it needs to override the default
system behavior and calls sef_startup() right after being started.
- sef_startup() does almost nothing now, but will be extended in the future to
support callbacks of its own to let RS control and synchronize with every
system process at initialization time.
- Every system process calls sef_receive() now rather than receive() directly,
to let SEF handle predefined system events.
RS CHANGES:
- RS supports a basic single-component live update protocol now, as follows:
* When an update command is issued (via "service update *"), RS notifies the
target system process to prepare for a specific update state.
* If the process doesn't respond back in time, the update is aborted.
* When the process responds back, RS kills it and marks it for refreshing.
* The process is then automatically restarted as for a buggy process and can
start running again.
* Live update is currently prototyped as a controlled failure.
2009-12-21 15:12:21 +01:00
|
|
|
{
|
Initialization protocol for system services.
SYSLIB CHANGES:
- SEF framework now supports a new SEF Init request type from RS. 3 different
callbacks are available (init_fresh, init_lu, init_restart) to specify
initialization code when a service starts fresh, starts after a live update,
or restarts.
SYSTEM SERVICE CHANGES:
- Initialization code for system services is now enclosed in a callback SEF will
automatically call at init time. The return code of the callback will
tell RS whether the initialization completed successfully.
- Each init callback can access information passed by RS to initialize. As of
now, each system service has access to the public entries of RS's system process
table to gather all the information required to initialize. This design
eliminates many existing or potential races at boot time and provides a uniform
initialization interface to system services. The same interface will be reused
for the upcoming publish/subscribe model to handle dynamic
registration / deregistration of system services.
VM CHANGES:
- Uniform privilege management for all system services. Every service uses the
same call mask format. For boot services, VM copies the call mask from init
data. For dynamic services, VM still receives the call mask via rs_set_priv
call that will be soon replaced by the upcoming publish/subscribe model.
RS CHANGES:
- The system process table has been reorganized and split into private entries
and public entries. Only the latter ones are exposed to system services.
- VM call masks are now entirely configured in rs/table.c
- RS has now its own slot in the system process table. Only kernel tasks and
user processes not included in the boot image are now left out from the system
process table.
- RS implements the initialization protocol for system services.
- For services in the boot image, RS blocks till initialization is complete and
panics when failure is reported back. Services are initialized in their order of
appearance in the boot image priv table and RS blocks to implements synchronous
initialization for every system service having the flag SF_SYNCH_BOOT set.
- For services started dynamically, the initialization protocol is implemented
as though it were the first ping for the service. In this case, if the
system service fails to report back (or reports failure), RS brings the service
down rather than trying to restart it.
2010-01-08 02:20:42 +01:00
|
|
|
/* Register init callbacks. */
|
|
|
|
sef_setcb_init_fresh(sef_cb_init_fresh);
|
2010-04-08 15:41:35 +02:00
|
|
|
sef_setcb_init_lu(sef_cb_init_fresh);
|
Initialization protocol for system services.
SYSLIB CHANGES:
- SEF framework now supports a new SEF Init request type from RS. 3 different
callbacks are available (init_fresh, init_lu, init_restart) to specify
initialization code when a service starts fresh, starts after a live update,
or restarts.
SYSTEM SERVICE CHANGES:
- Initialization code for system services is now enclosed in a callback SEF will
automatically call at init time. The return code of the callback will
tell RS whether the initialization completed successfully.
- Each init callback can access information passed by RS to initialize. As of
now, each system service has access to the public entries of RS's system process
table to gather all the information required to initialize. This design
eliminates many existing or potential races at boot time and provides a uniform
initialization interface to system services. The same interface will be reused
for the upcoming publish/subscribe model to handle dynamic
registration / deregistration of system services.
VM CHANGES:
- Uniform privilege management for all system services. Every service uses the
same call mask format. For boot services, VM copies the call mask from init
data. For dynamic services, VM still receives the call mask via rs_set_priv
call that will be soon replaced by the upcoming publish/subscribe model.
RS CHANGES:
- The system process table has been reorganized and split into private entries
and public entries. Only the latter ones are exposed to system services.
- VM call masks are now entirely configured in rs/table.c
- RS has now its own slot in the system process table. Only kernel tasks and
user processes not included in the boot image are now left out from the system
process table.
- RS implements the initialization protocol for system services.
- For services in the boot image, RS blocks till initialization is complete and
panics when failure is reported back. Services are initialized in their order of
appearance in the boot image priv table and RS blocks to implements synchronous
initialization for every system service having the flag SF_SYNCH_BOOT set.
- For services started dynamically, the initialization protocol is implemented
as though it were the first ping for the service. In this case, if the
system service fails to report back (or reports failure), RS brings the service
down rather than trying to restart it.
2010-01-08 02:20:42 +01:00
|
|
|
sef_setcb_init_restart(sef_cb_init_fresh);
|
|
|
|
|
2010-04-08 15:41:35 +02:00
|
|
|
/* Register live update callbacks. */
|
|
|
|
sef_setcb_lu_prepare(sef_cb_lu_prepare_always_ready);
|
|
|
|
sef_setcb_lu_state_isvalid(sef_cb_lu_state_isvalid_workfree);
|
Basic System Event Framework (SEF) with ping and live update.
SYSLIB CHANGES:
- SEF must be used by every system process and is thereby part of the system
library.
- The framework provides a receive() interface (sef_receive) for system
processes to automatically catch known system even messages and process them.
- SEF provides a default behavior for each type of system event, but allows
system processes to register callbacks to override the default behavior.
- Custom (local to the process) or predefined (provided by SEF) callback
implementations can be registered to SEF.
- SEF currently includes support for 2 types of system events:
1. SEF Ping. The event occurs every time RS sends a ping to figure out
whether a system process is still alive. The default callback implementation
provided by SEF is to notify RS back to let it know the process is alive
and kicking.
2. SEF Live update. The event occurs every time RS sends a prepare to update
message to let a system process know an update is available and to prepare
for it. The live update support is very basic for now. SEF only deals with
verifying if the prepare state can be supported by the process, dumping the
state for debugging purposes, and providing an event-driven programming
model to the process to react to state changes check-in when ready to update.
- SEF should be extended in the future to integrate support for more types of
system events. Ideally, all the cross-cutting concerns should be integrated into
SEF to avoid duplicating code and ease extensibility. Examples include:
* PM notify messages primarily used at shutdown.
* SYSTEM notify messages primarily used for signals.
* CLOCK notify messages used for system alarms.
* Debug messages. IS could still be in charge of fkey handling but would
forward the debug message to the target process (e.g. PM, if the user
requested debug information about PM). SEF would then catch the message and
do nothing unless the process has registered an appropriate callback to
deal with the event. This simplifies the programming model to print debug
information, avoids duplicating code, and reduces the effort to print
debug information.
SYSTEM PROCESSES CHANGES:
- Every system process registers SEF callbacks it needs to override the default
system behavior and calls sef_startup() right after being started.
- sef_startup() does almost nothing now, but will be extended in the future to
support callbacks of its own to let RS control and synchronize with every
system process at initialization time.
- Every system process calls sef_receive() now rather than receive() directly,
to let SEF handle predefined system events.
RS CHANGES:
- RS supports a basic single-component live update protocol now, as follows:
* When an update command is issued (via "service update *"), RS notifies the
target system process to prepare for a specific update state.
* If the process doesn't respond back in time, the update is aborted.
* When the process responds back, RS kills it and marks it for refreshing.
* The process is then automatically restarted as for a buggy process and can
start running again.
* Live update is currently prototyped as a controlled failure.
2009-12-21 15:12:21 +01:00
|
|
|
|
New RS and new signal handling for system processes.
UPDATING INFO:
20100317:
/usr/src/etc/system.conf updated to ignore default kernel calls: copy
it (or merge it) to /etc/system.conf.
The hello driver (/dev/hello) added to the distribution:
# cd /usr/src/commands/scripts && make clean install
# cd /dev && MAKEDEV hello
KERNEL CHANGES:
- Generic signal handling support. The kernel no longer assumes PM as a signal
manager for every process. The signal manager of a given process can now be
specified in its privilege slot. When a signal has to be delivered, the kernel
performs the lookup and forwards the signal to the appropriate signal manager.
PM is the default signal manager for user processes, RS is the default signal
manager for system processes. To enable ptrace()ing for system processes, it
is sufficient to change the default signal manager to PM. This will temporarily
disable crash recovery, though.
- sys_exit() is now split into sys_exit() (i.e. exit() for system processes,
which generates a self-termination signal), and sys_clear() (i.e. used by PM
to ask the kernel to clear a process slot when a process exits).
- Added a new kernel call (i.e. sys_update()) to swap two process slots and
implement live update.
PM CHANGES:
- Posix signal handling is no longer allowed for system processes. System
signals are split into two fixed categories: termination and non-termination
signals. When a non-termination signaled is processed, PM transforms the signal
into an IPC message and delivers the message to the system process. When a
termination signal is processed, PM terminates the process.
- PM no longer assumes itself as the signal manager for system processes. It now
makes sure that every system signal goes through the kernel before being
actually processes. The kernel will then dispatch the signal to the appropriate
signal manager which may or may not be PM.
SYSLIB CHANGES:
- Simplified SEF init and LU callbacks.
- Added additional predefined SEF callbacks to debug crash recovery and
live update.
- Fixed a temporary ack in the SEF init protocol. SEF init reply is now
completely synchronous.
- Added SEF signal event type to provide a uniform interface for system
processes to deal with signals. A sef_cb_signal_handler() callback is
available for system processes to handle every received signal. A
sef_cb_signal_manager() callback is used by signal managers to process
system signals on behalf of the kernel.
- Fixed a few bugs with memory mapping and DS.
VM CHANGES:
- Page faults and memory requests coming from the kernel are now implemented
using signals.
- Added a new VM call to swap two process slots and implement live update.
- The call is used by RS at update time and in turn invokes the kernel call
sys_update().
RS CHANGES:
- RS has been reworked with a better functional decomposition.
- Better kernel call masks. com.h now defines the set of very basic kernel calls
every system service is allowed to use. This makes system.conf simpler and
easier to maintain. In addition, this guarantees a higher level of isolation
for system libraries that use one or more kernel calls internally (e.g. printf).
- RS is the default signal manager for system processes. By default, RS
intercepts every signal delivered to every system process. This makes crash
recovery possible before bringing PM and friends in the loop.
- RS now supports fast rollback when something goes wrong while initializing
the new version during a live update.
- Live update is now implemented by keeping the two versions side-by-side and
swapping the process slots when the old version is ready to update.
- Crash recovery is now implemented by keeping the two versions side-by-side
and cleaning up the old version only when the recovery process is complete.
DS CHANGES:
- Fixed a bug when the process doing ds_publish() or ds_delete() is not known
by DS.
- Fixed the completely broken support for strings. String publishing is now
implemented in the system library and simply wraps publishing of memory ranges.
Ideally, we should adopt a similar approach for other data types as well.
- Test suite fixed.
DRIVER CHANGES:
- The hello driver has been added to the Minix distribution to demonstrate basic
live update and crash recovery functionalities.
- Other drivers have been adapted to conform the new SEF interface.
2010-03-17 02:15:29 +01:00
|
|
|
/* Register signal callbacks. */
|
|
|
|
sef_setcb_signal_handler(sef_cb_signal_handler);
|
|
|
|
|
Basic System Event Framework (SEF) with ping and live update.
SYSLIB CHANGES:
- SEF must be used by every system process and is thereby part of the system
library.
- The framework provides a receive() interface (sef_receive) for system
processes to automatically catch known system even messages and process them.
- SEF provides a default behavior for each type of system event, but allows
system processes to register callbacks to override the default behavior.
- Custom (local to the process) or predefined (provided by SEF) callback
implementations can be registered to SEF.
- SEF currently includes support for 2 types of system events:
1. SEF Ping. The event occurs every time RS sends a ping to figure out
whether a system process is still alive. The default callback implementation
provided by SEF is to notify RS back to let it know the process is alive
and kicking.
2. SEF Live update. The event occurs every time RS sends a prepare to update
message to let a system process know an update is available and to prepare
for it. The live update support is very basic for now. SEF only deals with
verifying if the prepare state can be supported by the process, dumping the
state for debugging purposes, and providing an event-driven programming
model to the process to react to state changes check-in when ready to update.
- SEF should be extended in the future to integrate support for more types of
system events. Ideally, all the cross-cutting concerns should be integrated into
SEF to avoid duplicating code and ease extensibility. Examples include:
* PM notify messages primarily used at shutdown.
* SYSTEM notify messages primarily used for signals.
* CLOCK notify messages used for system alarms.
* Debug messages. IS could still be in charge of fkey handling but would
forward the debug message to the target process (e.g. PM, if the user
requested debug information about PM). SEF would then catch the message and
do nothing unless the process has registered an appropriate callback to
deal with the event. This simplifies the programming model to print debug
information, avoids duplicating code, and reduces the effort to print
debug information.
SYSTEM PROCESSES CHANGES:
- Every system process registers SEF callbacks it needs to override the default
system behavior and calls sef_startup() right after being started.
- sef_startup() does almost nothing now, but will be extended in the future to
support callbacks of its own to let RS control and synchronize with every
system process at initialization time.
- Every system process calls sef_receive() now rather than receive() directly,
to let SEF handle predefined system events.
RS CHANGES:
- RS supports a basic single-component live update protocol now, as follows:
* When an update command is issued (via "service update *"), RS notifies the
target system process to prepare for a specific update state.
* If the process doesn't respond back in time, the update is aborted.
* When the process responds back, RS kills it and marks it for refreshing.
* The process is then automatically restarted as for a buggy process and can
start running again.
* Live update is currently prototyped as a controlled failure.
2009-12-21 15:12:21 +01:00
|
|
|
/* Let SEF perform startup. */
|
|
|
|
sef_startup();
|
|
|
|
}
|
|
|
|
|
Initialization protocol for system services.
SYSLIB CHANGES:
- SEF framework now supports a new SEF Init request type from RS. 3 different
callbacks are available (init_fresh, init_lu, init_restart) to specify
initialization code when a service starts fresh, starts after a live update,
or restarts.
SYSTEM SERVICE CHANGES:
- Initialization code for system services is now enclosed in a callback SEF will
automatically call at init time. The return code of the callback will
tell RS whether the initialization completed successfully.
- Each init callback can access information passed by RS to initialize. As of
now, each system service has access to the public entries of RS's system process
table to gather all the information required to initialize. This design
eliminates many existing or potential races at boot time and provides a uniform
initialization interface to system services. The same interface will be reused
for the upcoming publish/subscribe model to handle dynamic
registration / deregistration of system services.
VM CHANGES:
- Uniform privilege management for all system services. Every service uses the
same call mask format. For boot services, VM copies the call mask from init
data. For dynamic services, VM still receives the call mask via rs_set_priv
call that will be soon replaced by the upcoming publish/subscribe model.
RS CHANGES:
- The system process table has been reorganized and split into private entries
and public entries. Only the latter ones are exposed to system services.
- VM call masks are now entirely configured in rs/table.c
- RS has now its own slot in the system process table. Only kernel tasks and
user processes not included in the boot image are now left out from the system
process table.
- RS implements the initialization protocol for system services.
- For services in the boot image, RS blocks till initialization is complete and
panics when failure is reported back. Services are initialized in their order of
appearance in the boot image priv table and RS blocks to implements synchronous
initialization for every system service having the flag SF_SYNCH_BOOT set.
- For services started dynamically, the initialization protocol is implemented
as though it were the first ping for the service. In this case, if the
system service fails to report back (or reports failure), RS brings the service
down rather than trying to restart it.
2010-01-08 02:20:42 +01:00
|
|
|
/*===========================================================================*
|
|
|
|
* sef_cb_init_fresh *
|
|
|
|
*===========================================================================*/
|
2012-03-25 20:25:53 +02:00
|
|
|
static int sef_cb_init_fresh(int type, sef_init_info_t *UNUSED(info))
|
Initialization protocol for system services.
SYSLIB CHANGES:
- SEF framework now supports a new SEF Init request type from RS. 3 different
callbacks are available (init_fresh, init_lu, init_restart) to specify
initialization code when a service starts fresh, starts after a live update,
or restarts.
SYSTEM SERVICE CHANGES:
- Initialization code for system services is now enclosed in a callback SEF will
automatically call at init time. The return code of the callback will
tell RS whether the initialization completed successfully.
- Each init callback can access information passed by RS to initialize. As of
now, each system service has access to the public entries of RS's system process
table to gather all the information required to initialize. This design
eliminates many existing or potential races at boot time and provides a uniform
initialization interface to system services. The same interface will be reused
for the upcoming publish/subscribe model to handle dynamic
registration / deregistration of system services.
VM CHANGES:
- Uniform privilege management for all system services. Every service uses the
same call mask format. For boot services, VM copies the call mask from init
data. For dynamic services, VM still receives the call mask via rs_set_priv
call that will be soon replaced by the upcoming publish/subscribe model.
RS CHANGES:
- The system process table has been reorganized and split into private entries
and public entries. Only the latter ones are exposed to system services.
- VM call masks are now entirely configured in rs/table.c
- RS has now its own slot in the system process table. Only kernel tasks and
user processes not included in the boot image are now left out from the system
process table.
- RS implements the initialization protocol for system services.
- For services in the boot image, RS blocks till initialization is complete and
panics when failure is reported back. Services are initialized in their order of
appearance in the boot image priv table and RS blocks to implements synchronous
initialization for every system service having the flag SF_SYNCH_BOOT set.
- For services started dynamically, the initialization protocol is implemented
as though it were the first ping for the service. In this case, if the
system service fails to report back (or reports failure), RS brings the service
down rather than trying to restart it.
2010-01-08 02:20:42 +01:00
|
|
|
{
|
|
|
|
/* Initialize the lance driver. */
|
|
|
|
long v;
|
|
|
|
#if LANCE_FKEY
|
2010-05-18 00:22:53 +02:00
|
|
|
int r, fkeys, sfkeys;
|
Initialization protocol for system services.
SYSLIB CHANGES:
- SEF framework now supports a new SEF Init request type from RS. 3 different
callbacks are available (init_fresh, init_lu, init_restart) to specify
initialization code when a service starts fresh, starts after a live update,
or restarts.
SYSTEM SERVICE CHANGES:
- Initialization code for system services is now enclosed in a callback SEF will
automatically call at init time. The return code of the callback will
tell RS whether the initialization completed successfully.
- Each init callback can access information passed by RS to initialize. As of
now, each system service has access to the public entries of RS's system process
table to gather all the information required to initialize. This design
eliminates many existing or potential races at boot time and provides a uniform
initialization interface to system services. The same interface will be reused
for the upcoming publish/subscribe model to handle dynamic
registration / deregistration of system services.
VM CHANGES:
- Uniform privilege management for all system services. Every service uses the
same call mask format. For boot services, VM copies the call mask from init
data. For dynamic services, VM still receives the call mask via rs_set_priv
call that will be soon replaced by the upcoming publish/subscribe model.
RS CHANGES:
- The system process table has been reorganized and split into private entries
and public entries. Only the latter ones are exposed to system services.
- VM call masks are now entirely configured in rs/table.c
- RS has now its own slot in the system process table. Only kernel tasks and
user processes not included in the boot image are now left out from the system
process table.
- RS implements the initialization protocol for system services.
- For services in the boot image, RS blocks till initialization is complete and
panics when failure is reported back. Services are initialized in their order of
appearance in the boot image priv table and RS blocks to implements synchronous
initialization for every system service having the flag SF_SYNCH_BOOT set.
- For services started dynamically, the initialization protocol is implemented
as though it were the first ping for the service. In this case, if the
system service fails to report back (or reports failure), RS brings the service
down rather than trying to restart it.
2010-01-08 02:20:42 +01:00
|
|
|
#endif
|
|
|
|
|
|
|
|
#if LANCE_FKEY
|
|
|
|
fkeys = sfkeys = 0;
|
|
|
|
bit_set( sfkeys, 7 );
|
|
|
|
if ( (r = fkey_map(&fkeys, &sfkeys)) != OK )
|
|
|
|
printf("Warning: lance couldn't observe Shift+F7 key: %d\n",r);
|
|
|
|
#endif
|
|
|
|
|
2010-05-18 00:22:53 +02:00
|
|
|
v = 0;
|
|
|
|
(void) env_parse("instance", "d", 0, &v, 0, 255);
|
|
|
|
ec_instance = (int) v;
|
Initialization protocol for system services.
SYSLIB CHANGES:
- SEF framework now supports a new SEF Init request type from RS. 3 different
callbacks are available (init_fresh, init_lu, init_restart) to specify
initialization code when a service starts fresh, starts after a live update,
or restarts.
SYSTEM SERVICE CHANGES:
- Initialization code for system services is now enclosed in a callback SEF will
automatically call at init time. The return code of the callback will
tell RS whether the initialization completed successfully.
- Each init callback can access information passed by RS to initialize. As of
now, each system service has access to the public entries of RS's system process
table to gather all the information required to initialize. This design
eliminates many existing or potential races at boot time and provides a uniform
initialization interface to system services. The same interface will be reused
for the upcoming publish/subscribe model to handle dynamic
registration / deregistration of system services.
VM CHANGES:
- Uniform privilege management for all system services. Every service uses the
same call mask format. For boot services, VM copies the call mask from init
data. For dynamic services, VM still receives the call mask via rs_set_priv
call that will be soon replaced by the upcoming publish/subscribe model.
RS CHANGES:
- The system process table has been reorganized and split into private entries
and public entries. Only the latter ones are exposed to system services.
- VM call masks are now entirely configured in rs/table.c
- RS has now its own slot in the system process table. Only kernel tasks and
user processes not included in the boot image are now left out from the system
process table.
- RS implements the initialization protocol for system services.
- For services in the boot image, RS blocks till initialization is complete and
panics when failure is reported back. Services are initialized in their order of
appearance in the boot image priv table and RS blocks to implements synchronous
initialization for every system service having the flag SF_SYNCH_BOOT set.
- For services started dynamically, the initialization protocol is implemented
as though it were the first ping for the service. In this case, if the
system service fails to report back (or reports failure), RS brings the service
down rather than trying to restart it.
2010-01-08 02:20:42 +01:00
|
|
|
|
2010-05-18 00:22:53 +02:00
|
|
|
/* Announce we are up! */
|
|
|
|
netdriver_announce();
|
Initialization protocol for system services.
SYSLIB CHANGES:
- SEF framework now supports a new SEF Init request type from RS. 3 different
callbacks are available (init_fresh, init_lu, init_restart) to specify
initialization code when a service starts fresh, starts after a live update,
or restarts.
SYSTEM SERVICE CHANGES:
- Initialization code for system services is now enclosed in a callback SEF will
automatically call at init time. The return code of the callback will
tell RS whether the initialization completed successfully.
- Each init callback can access information passed by RS to initialize. As of
now, each system service has access to the public entries of RS's system process
table to gather all the information required to initialize. This design
eliminates many existing or potential races at boot time and provides a uniform
initialization interface to system services. The same interface will be reused
for the upcoming publish/subscribe model to handle dynamic
registration / deregistration of system services.
VM CHANGES:
- Uniform privilege management for all system services. Every service uses the
same call mask format. For boot services, VM copies the call mask from init
data. For dynamic services, VM still receives the call mask via rs_set_priv
call that will be soon replaced by the upcoming publish/subscribe model.
RS CHANGES:
- The system process table has been reorganized and split into private entries
and public entries. Only the latter ones are exposed to system services.
- VM call masks are now entirely configured in rs/table.c
- RS has now its own slot in the system process table. Only kernel tasks and
user processes not included in the boot image are now left out from the system
process table.
- RS implements the initialization protocol for system services.
- For services in the boot image, RS blocks till initialization is complete and
panics when failure is reported back. Services are initialized in their order of
appearance in the boot image priv table and RS blocks to implements synchronous
initialization for every system service having the flag SF_SYNCH_BOOT set.
- For services started dynamically, the initialization protocol is implemented
as though it were the first ping for the service. In this case, if the
system service fails to report back (or reports failure), RS brings the service
down rather than trying to restart it.
2010-01-08 02:20:42 +01:00
|
|
|
|
New RS and new signal handling for system processes.
UPDATING INFO:
20100317:
/usr/src/etc/system.conf updated to ignore default kernel calls: copy
it (or merge it) to /etc/system.conf.
The hello driver (/dev/hello) added to the distribution:
# cd /usr/src/commands/scripts && make clean install
# cd /dev && MAKEDEV hello
KERNEL CHANGES:
- Generic signal handling support. The kernel no longer assumes PM as a signal
manager for every process. The signal manager of a given process can now be
specified in its privilege slot. When a signal has to be delivered, the kernel
performs the lookup and forwards the signal to the appropriate signal manager.
PM is the default signal manager for user processes, RS is the default signal
manager for system processes. To enable ptrace()ing for system processes, it
is sufficient to change the default signal manager to PM. This will temporarily
disable crash recovery, though.
- sys_exit() is now split into sys_exit() (i.e. exit() for system processes,
which generates a self-termination signal), and sys_clear() (i.e. used by PM
to ask the kernel to clear a process slot when a process exits).
- Added a new kernel call (i.e. sys_update()) to swap two process slots and
implement live update.
PM CHANGES:
- Posix signal handling is no longer allowed for system processes. System
signals are split into two fixed categories: termination and non-termination
signals. When a non-termination signaled is processed, PM transforms the signal
into an IPC message and delivers the message to the system process. When a
termination signal is processed, PM terminates the process.
- PM no longer assumes itself as the signal manager for system processes. It now
makes sure that every system signal goes through the kernel before being
actually processes. The kernel will then dispatch the signal to the appropriate
signal manager which may or may not be PM.
SYSLIB CHANGES:
- Simplified SEF init and LU callbacks.
- Added additional predefined SEF callbacks to debug crash recovery and
live update.
- Fixed a temporary ack in the SEF init protocol. SEF init reply is now
completely synchronous.
- Added SEF signal event type to provide a uniform interface for system
processes to deal with signals. A sef_cb_signal_handler() callback is
available for system processes to handle every received signal. A
sef_cb_signal_manager() callback is used by signal managers to process
system signals on behalf of the kernel.
- Fixed a few bugs with memory mapping and DS.
VM CHANGES:
- Page faults and memory requests coming from the kernel are now implemented
using signals.
- Added a new VM call to swap two process slots and implement live update.
- The call is used by RS at update time and in turn invokes the kernel call
sys_update().
RS CHANGES:
- RS has been reworked with a better functional decomposition.
- Better kernel call masks. com.h now defines the set of very basic kernel calls
every system service is allowed to use. This makes system.conf simpler and
easier to maintain. In addition, this guarantees a higher level of isolation
for system libraries that use one or more kernel calls internally (e.g. printf).
- RS is the default signal manager for system processes. By default, RS
intercepts every signal delivered to every system process. This makes crash
recovery possible before bringing PM and friends in the loop.
- RS now supports fast rollback when something goes wrong while initializing
the new version during a live update.
- Live update is now implemented by keeping the two versions side-by-side and
swapping the process slots when the old version is ready to update.
- Crash recovery is now implemented by keeping the two versions side-by-side
and cleaning up the old version only when the recovery process is complete.
DS CHANGES:
- Fixed a bug when the process doing ds_publish() or ds_delete() is not known
by DS.
- Fixed the completely broken support for strings. String publishing is now
implemented in the system library and simply wraps publishing of memory ranges.
Ideally, we should adopt a similar approach for other data types as well.
- Test suite fixed.
DRIVER CHANGES:
- The hello driver has been added to the Minix distribution to demonstrate basic
live update and crash recovery functionalities.
- Other drivers have been adapted to conform the new SEF interface.
2010-03-17 02:15:29 +01:00
|
|
|
return OK;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*===========================================================================*
|
|
|
|
* sef_cb_signal_handler *
|
|
|
|
*===========================================================================*/
|
2012-03-25 20:25:53 +02:00
|
|
|
static void sef_cb_signal_handler(int signo)
|
New RS and new signal handling for system processes.
UPDATING INFO:
20100317:
/usr/src/etc/system.conf updated to ignore default kernel calls: copy
it (or merge it) to /etc/system.conf.
The hello driver (/dev/hello) added to the distribution:
# cd /usr/src/commands/scripts && make clean install
# cd /dev && MAKEDEV hello
KERNEL CHANGES:
- Generic signal handling support. The kernel no longer assumes PM as a signal
manager for every process. The signal manager of a given process can now be
specified in its privilege slot. When a signal has to be delivered, the kernel
performs the lookup and forwards the signal to the appropriate signal manager.
PM is the default signal manager for user processes, RS is the default signal
manager for system processes. To enable ptrace()ing for system processes, it
is sufficient to change the default signal manager to PM. This will temporarily
disable crash recovery, though.
- sys_exit() is now split into sys_exit() (i.e. exit() for system processes,
which generates a self-termination signal), and sys_clear() (i.e. used by PM
to ask the kernel to clear a process slot when a process exits).
- Added a new kernel call (i.e. sys_update()) to swap two process slots and
implement live update.
PM CHANGES:
- Posix signal handling is no longer allowed for system processes. System
signals are split into two fixed categories: termination and non-termination
signals. When a non-termination signaled is processed, PM transforms the signal
into an IPC message and delivers the message to the system process. When a
termination signal is processed, PM terminates the process.
- PM no longer assumes itself as the signal manager for system processes. It now
makes sure that every system signal goes through the kernel before being
actually processes. The kernel will then dispatch the signal to the appropriate
signal manager which may or may not be PM.
SYSLIB CHANGES:
- Simplified SEF init and LU callbacks.
- Added additional predefined SEF callbacks to debug crash recovery and
live update.
- Fixed a temporary ack in the SEF init protocol. SEF init reply is now
completely synchronous.
- Added SEF signal event type to provide a uniform interface for system
processes to deal with signals. A sef_cb_signal_handler() callback is
available for system processes to handle every received signal. A
sef_cb_signal_manager() callback is used by signal managers to process
system signals on behalf of the kernel.
- Fixed a few bugs with memory mapping and DS.
VM CHANGES:
- Page faults and memory requests coming from the kernel are now implemented
using signals.
- Added a new VM call to swap two process slots and implement live update.
- The call is used by RS at update time and in turn invokes the kernel call
sys_update().
RS CHANGES:
- RS has been reworked with a better functional decomposition.
- Better kernel call masks. com.h now defines the set of very basic kernel calls
every system service is allowed to use. This makes system.conf simpler and
easier to maintain. In addition, this guarantees a higher level of isolation
for system libraries that use one or more kernel calls internally (e.g. printf).
- RS is the default signal manager for system processes. By default, RS
intercepts every signal delivered to every system process. This makes crash
recovery possible before bringing PM and friends in the loop.
- RS now supports fast rollback when something goes wrong while initializing
the new version during a live update.
- Live update is now implemented by keeping the two versions side-by-side and
swapping the process slots when the old version is ready to update.
- Crash recovery is now implemented by keeping the two versions side-by-side
and cleaning up the old version only when the recovery process is complete.
DS CHANGES:
- Fixed a bug when the process doing ds_publish() or ds_delete() is not known
by DS.
- Fixed the completely broken support for strings. String publishing is now
implemented in the system library and simply wraps publishing of memory ranges.
Ideally, we should adopt a similar approach for other data types as well.
- Test suite fixed.
DRIVER CHANGES:
- The hello driver has been added to the Minix distribution to demonstrate basic
live update and crash recovery functionalities.
- Other drivers have been adapted to conform the new SEF interface.
2010-03-17 02:15:29 +01:00
|
|
|
{
|
|
|
|
|
|
|
|
/* Only check for termination signal, ignore anything else. */
|
|
|
|
if (signo != SIGTERM) return;
|
|
|
|
|
2010-05-18 00:22:53 +02:00
|
|
|
if (ec_state.mode == EC_ENABLED)
|
|
|
|
lance_stop(&ec_state);
|
New RS and new signal handling for system processes.
UPDATING INFO:
20100317:
/usr/src/etc/system.conf updated to ignore default kernel calls: copy
it (or merge it) to /etc/system.conf.
The hello driver (/dev/hello) added to the distribution:
# cd /usr/src/commands/scripts && make clean install
# cd /dev && MAKEDEV hello
KERNEL CHANGES:
- Generic signal handling support. The kernel no longer assumes PM as a signal
manager for every process. The signal manager of a given process can now be
specified in its privilege slot. When a signal has to be delivered, the kernel
performs the lookup and forwards the signal to the appropriate signal manager.
PM is the default signal manager for user processes, RS is the default signal
manager for system processes. To enable ptrace()ing for system processes, it
is sufficient to change the default signal manager to PM. This will temporarily
disable crash recovery, though.
- sys_exit() is now split into sys_exit() (i.e. exit() for system processes,
which generates a self-termination signal), and sys_clear() (i.e. used by PM
to ask the kernel to clear a process slot when a process exits).
- Added a new kernel call (i.e. sys_update()) to swap two process slots and
implement live update.
PM CHANGES:
- Posix signal handling is no longer allowed for system processes. System
signals are split into two fixed categories: termination and non-termination
signals. When a non-termination signaled is processed, PM transforms the signal
into an IPC message and delivers the message to the system process. When a
termination signal is processed, PM terminates the process.
- PM no longer assumes itself as the signal manager for system processes. It now
makes sure that every system signal goes through the kernel before being
actually processes. The kernel will then dispatch the signal to the appropriate
signal manager which may or may not be PM.
SYSLIB CHANGES:
- Simplified SEF init and LU callbacks.
- Added additional predefined SEF callbacks to debug crash recovery and
live update.
- Fixed a temporary ack in the SEF init protocol. SEF init reply is now
completely synchronous.
- Added SEF signal event type to provide a uniform interface for system
processes to deal with signals. A sef_cb_signal_handler() callback is
available for system processes to handle every received signal. A
sef_cb_signal_manager() callback is used by signal managers to process
system signals on behalf of the kernel.
- Fixed a few bugs with memory mapping and DS.
VM CHANGES:
- Page faults and memory requests coming from the kernel are now implemented
using signals.
- Added a new VM call to swap two process slots and implement live update.
- The call is used by RS at update time and in turn invokes the kernel call
sys_update().
RS CHANGES:
- RS has been reworked with a better functional decomposition.
- Better kernel call masks. com.h now defines the set of very basic kernel calls
every system service is allowed to use. This makes system.conf simpler and
easier to maintain. In addition, this guarantees a higher level of isolation
for system libraries that use one or more kernel calls internally (e.g. printf).
- RS is the default signal manager for system processes. By default, RS
intercepts every signal delivered to every system process. This makes crash
recovery possible before bringing PM and friends in the loop.
- RS now supports fast rollback when something goes wrong while initializing
the new version during a live update.
- Live update is now implemented by keeping the two versions side-by-side and
swapping the process slots when the old version is ready to update.
- Crash recovery is now implemented by keeping the two versions side-by-side
and cleaning up the old version only when the recovery process is complete.
DS CHANGES:
- Fixed a bug when the process doing ds_publish() or ds_delete() is not known
by DS.
- Fixed the completely broken support for strings. String publishing is now
implemented in the system library and simply wraps publishing of memory ranges.
Ideally, we should adopt a similar approach for other data types as well.
- Test suite fixed.
DRIVER CHANGES:
- The hello driver has been added to the Minix distribution to demonstrate basic
live update and crash recovery functionalities.
- Other drivers have been adapted to conform the new SEF interface.
2010-03-17 02:15:29 +01:00
|
|
|
|
|
|
|
#if VERBOSE
|
|
|
|
printf("LANCE driver stopped.\n");
|
|
|
|
#endif
|
|
|
|
|
|
|
|
exit(0);
|
Initialization protocol for system services.
SYSLIB CHANGES:
- SEF framework now supports a new SEF Init request type from RS. 3 different
callbacks are available (init_fresh, init_lu, init_restart) to specify
initialization code when a service starts fresh, starts after a live update,
or restarts.
SYSTEM SERVICE CHANGES:
- Initialization code for system services is now enclosed in a callback SEF will
automatically call at init time. The return code of the callback will
tell RS whether the initialization completed successfully.
- Each init callback can access information passed by RS to initialize. As of
now, each system service has access to the public entries of RS's system process
table to gather all the information required to initialize. This design
eliminates many existing or potential races at boot time and provides a uniform
initialization interface to system services. The same interface will be reused
for the upcoming publish/subscribe model to handle dynamic
registration / deregistration of system services.
VM CHANGES:
- Uniform privilege management for all system services. Every service uses the
same call mask format. For boot services, VM copies the call mask from init
data. For dynamic services, VM still receives the call mask via rs_set_priv
call that will be soon replaced by the upcoming publish/subscribe model.
RS CHANGES:
- The system process table has been reorganized and split into private entries
and public entries. Only the latter ones are exposed to system services.
- VM call masks are now entirely configured in rs/table.c
- RS has now its own slot in the system process table. Only kernel tasks and
user processes not included in the boot image are now left out from the system
process table.
- RS implements the initialization protocol for system services.
- For services in the boot image, RS blocks till initialization is complete and
panics when failure is reported back. Services are initialized in their order of
appearance in the boot image priv table and RS blocks to implements synchronous
initialization for every system service having the flag SF_SYNCH_BOOT set.
- For services started dynamically, the initialization protocol is implemented
as though it were the first ping for the service. In this case, if the
system service fails to report back (or reports failure), RS brings the service
down rather than trying to restart it.
2010-01-08 02:20:42 +01:00
|
|
|
}
|
|
|
|
|
2005-09-04 22:08:22 +02:00
|
|
|
/*===========================================================================*
|
2009-07-22 14:36:19 +02:00
|
|
|
* lance_dump *
|
2005-09-04 22:08:22 +02:00
|
|
|
*===========================================================================*/
|
|
|
|
static void lance_dump()
|
|
|
|
{
|
2009-07-22 14:36:19 +02:00
|
|
|
ether_card_t *ec;
|
2010-05-18 00:22:53 +02:00
|
|
|
int isr, csr;
|
2009-07-22 14:36:19 +02:00
|
|
|
unsigned short ioaddr;
|
2005-09-04 22:08:22 +02:00
|
|
|
|
2009-07-22 14:36:19 +02:00
|
|
|
printf("\n");
|
2010-05-18 00:22:53 +02:00
|
|
|
ec = &ec_state;
|
|
|
|
if (ec->mode == EC_DISABLED)
|
|
|
|
printf("lance instance %d is disabled\n", ec_instance);
|
|
|
|
else if (ec->mode == EC_SINK)
|
|
|
|
printf("lance instance %d is in sink mode\n", ec_instance);
|
|
|
|
|
|
|
|
if (ec->mode != EC_ENABLED)
|
|
|
|
return;
|
2005-09-04 22:08:22 +02:00
|
|
|
|
2010-05-18 00:22:53 +02:00
|
|
|
printf("lance statistics of instance %d:\n", ec_instance);
|
2005-09-04 22:08:22 +02:00
|
|
|
|
2010-05-18 00:22:53 +02:00
|
|
|
printf("recvErr :%8ld\t", ec->eth_stat.ets_recvErr);
|
|
|
|
printf("sendErr :%8ld\t", ec->eth_stat.ets_sendErr);
|
|
|
|
printf("OVW :%8ld\n", ec->eth_stat.ets_OVW);
|
2005-09-04 22:08:22 +02:00
|
|
|
|
2010-05-18 00:22:53 +02:00
|
|
|
printf("CRCerr :%8ld\t", ec->eth_stat.ets_CRCerr);
|
|
|
|
printf("frameAll :%8ld\t", ec->eth_stat.ets_frameAll);
|
|
|
|
printf("missedP :%8ld\n", ec->eth_stat.ets_missedP);
|
2005-09-04 22:08:22 +02:00
|
|
|
|
2010-05-18 00:22:53 +02:00
|
|
|
printf("packetR :%8ld\t", ec->eth_stat.ets_packetR);
|
|
|
|
printf("packetT :%8ld\t", ec->eth_stat.ets_packetT);
|
|
|
|
printf("transDef :%8ld\n", ec->eth_stat.ets_transDef);
|
2005-09-04 22:08:22 +02:00
|
|
|
|
2010-05-18 00:22:53 +02:00
|
|
|
printf("collision :%8ld\t", ec->eth_stat.ets_collision);
|
|
|
|
printf("transAb :%8ld\t", ec->eth_stat.ets_transAb);
|
|
|
|
printf("carrSense :%8ld\n", ec->eth_stat.ets_carrSense);
|
2005-09-04 22:08:22 +02:00
|
|
|
|
2010-05-18 00:22:53 +02:00
|
|
|
printf("fifoUnder :%8ld\t", ec->eth_stat.ets_fifoUnder);
|
|
|
|
printf("fifoOver :%8ld\t", ec->eth_stat.ets_fifoOver);
|
|
|
|
printf("CDheartbeat:%8ld\n", ec->eth_stat.ets_CDheartbeat);
|
2005-09-04 22:08:22 +02:00
|
|
|
|
2010-05-18 00:22:53 +02:00
|
|
|
printf("OWC :%8ld\t", ec->eth_stat.ets_OWC);
|
2005-09-04 22:08:22 +02:00
|
|
|
|
2010-05-18 00:22:53 +02:00
|
|
|
ioaddr = ec->ec_port;
|
|
|
|
isr = read_csr(ioaddr, LANCE_CSR0);
|
|
|
|
printf("isr = 0x%x, flags = 0x%x\n", isr,
|
2009-07-22 14:36:19 +02:00
|
|
|
ec->flags);
|
|
|
|
|
2010-05-18 00:22:53 +02:00
|
|
|
printf("irq = %d\tioadr = 0x%x\n", ec->ec_irq, ec->ec_port);
|
|
|
|
|
|
|
|
csr = read_csr(ioaddr, LANCE_CSR0);
|
|
|
|
printf("CSR0: 0x%x\n", csr);
|
|
|
|
csr = read_csr(ioaddr, LANCE_CSR3);
|
|
|
|
printf("CSR3: 0x%x\n", csr);
|
|
|
|
csr = read_csr(ioaddr, LANCE_CSR4);
|
|
|
|
printf("CSR4: 0x%x\n", csr);
|
|
|
|
csr = read_csr(ioaddr, LANCE_CSR5);
|
|
|
|
printf("CSR5: 0x%x\n", csr);
|
|
|
|
csr = read_csr(ioaddr, LANCE_CSR15);
|
|
|
|
printf("CSR15: 0x%x\n", csr);
|
2005-09-04 22:08:22 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
/*===========================================================================*
|
|
|
|
* do_init *
|
|
|
|
*===========================================================================*/
|
|
|
|
static void do_init(mp)
|
|
|
|
message *mp;
|
|
|
|
{
|
2009-07-22 14:36:19 +02:00
|
|
|
ether_card_t *ec;
|
|
|
|
message reply_mess;
|
2005-09-04 22:08:22 +02:00
|
|
|
|
2009-07-22 14:36:19 +02:00
|
|
|
pci_init();
|
2005-09-04 22:08:22 +02:00
|
|
|
|
2009-07-22 14:36:19 +02:00
|
|
|
if(!lance_buf && !(lance_buf = alloc_contig(LANCE_BUF_SIZE, AC_ALIGN4K|AC_LOWER16M, &lance_buf_phys))) {
|
2010-03-05 16:05:11 +01:00
|
|
|
panic("alloc_contig failed: %d", LANCE_BUF_SIZE);
|
2009-07-22 14:36:19 +02:00
|
|
|
}
|
2008-12-17 02:20:15 +01:00
|
|
|
|
2010-05-18 00:22:53 +02:00
|
|
|
ec= &ec_state;
|
2012-08-03 18:55:23 +02:00
|
|
|
strlcpy(ec->port_name, "lance#0", sizeof(ec->port_name));
|
2010-05-18 00:22:53 +02:00
|
|
|
ec->port_name[6] += ec_instance;
|
2009-07-22 14:36:19 +02:00
|
|
|
|
|
|
|
if (ec->mode == EC_DISABLED)
|
|
|
|
{
|
2005-09-04 22:08:22 +02:00
|
|
|
/* This is the default, try to (re)locate the device. */
|
2005-09-05 20:01:56 +02:00
|
|
|
/* only try to enable if memory is correct for DMA */
|
2009-07-22 14:36:19 +02:00
|
|
|
if ( CORRECT_DMA_MEM() )
|
|
|
|
{
|
|
|
|
conf_hw(ec);
|
|
|
|
}
|
|
|
|
else
|
|
|
|
{
|
2010-03-05 16:05:11 +01:00
|
|
|
printf("LANCE: DMA denied because address out of range\n" );
|
2009-07-22 14:36:19 +02:00
|
|
|
}
|
|
|
|
|
2005-09-04 22:08:22 +02:00
|
|
|
if (ec->mode == EC_DISABLED)
|
2009-07-22 14:36:19 +02:00
|
|
|
{
|
|
|
|
/* Probe failed, or the device is configured off. */
|
|
|
|
reply_mess.m_type= DL_CONF_REPLY;
|
2010-05-18 00:22:53 +02:00
|
|
|
reply_mess.DL_STAT = ENXIO;
|
2009-07-22 14:36:19 +02:00
|
|
|
mess_reply(mp, &reply_mess);
|
|
|
|
return;
|
|
|
|
}
|
2005-09-04 22:08:22 +02:00
|
|
|
if (ec->mode == EC_ENABLED)
|
2009-07-22 14:36:19 +02:00
|
|
|
ec_init(ec);
|
|
|
|
}
|
2005-09-04 22:08:22 +02:00
|
|
|
|
2009-07-22 14:36:19 +02:00
|
|
|
if (ec->mode == EC_SINK)
|
|
|
|
{
|
2005-09-04 22:08:22 +02:00
|
|
|
ec->mac_address.ea_addr[0] =
|
2009-07-22 14:36:19 +02:00
|
|
|
ec->mac_address.ea_addr[1] =
|
|
|
|
ec->mac_address.ea_addr[2] =
|
|
|
|
ec->mac_address.ea_addr[3] =
|
|
|
|
ec->mac_address.ea_addr[4] =
|
|
|
|
ec->mac_address.ea_addr[5] = 0;
|
2005-09-04 22:08:22 +02:00
|
|
|
ec_confaddr(ec);
|
2006-07-10 14:43:38 +02:00
|
|
|
reply_mess.m_type = DL_CONF_REPLY;
|
2010-05-18 00:22:53 +02:00
|
|
|
reply_mess.DL_STAT = OK;
|
|
|
|
*(ether_addr_t *) reply_mess.DL_HWADDR = ec->mac_address;
|
2005-09-04 22:08:22 +02:00
|
|
|
mess_reply(mp, &reply_mess);
|
|
|
|
return;
|
2009-07-22 14:36:19 +02:00
|
|
|
}
|
|
|
|
assert(ec->mode == EC_ENABLED);
|
|
|
|
assert(ec->flags & ECF_ENABLED);
|
|
|
|
|
|
|
|
ec->flags &= ~(ECF_PROMISC | ECF_MULTI | ECF_BROAD);
|
|
|
|
|
|
|
|
if (mp->DL_MODE & DL_PROMISC_REQ)
|
|
|
|
ec->flags |= ECF_PROMISC | ECF_MULTI | ECF_BROAD;
|
|
|
|
if (mp->DL_MODE & DL_MULTI_REQ)
|
|
|
|
ec->flags |= ECF_MULTI;
|
|
|
|
if (mp->DL_MODE & DL_BROAD_REQ)
|
|
|
|
ec->flags |= ECF_BROAD;
|
|
|
|
|
2009-11-28 14:28:55 +01:00
|
|
|
ec_reinit(ec);
|
2009-07-22 14:36:19 +02:00
|
|
|
|
|
|
|
reply_mess.m_type = DL_CONF_REPLY;
|
2010-05-18 00:22:53 +02:00
|
|
|
reply_mess.DL_STAT = OK;
|
|
|
|
*(ether_addr_t *) reply_mess.DL_HWADDR = ec->mac_address;
|
2009-07-22 14:36:19 +02:00
|
|
|
|
|
|
|
mess_reply(mp, &reply_mess);
|
2005-09-04 22:08:22 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/*===========================================================================*
|
|
|
|
* do_int *
|
|
|
|
*===========================================================================*/
|
|
|
|
static void do_int(ec)
|
|
|
|
ether_card_t *ec;
|
|
|
|
{
|
2009-07-22 14:36:19 +02:00
|
|
|
if (ec->flags & (ECF_PACK_SEND | ECF_PACK_RECV))
|
2010-05-18 00:22:53 +02:00
|
|
|
reply(ec);
|
2005-09-04 22:08:22 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/*===========================================================================*
|
|
|
|
* conf_hw *
|
|
|
|
*===========================================================================*/
|
|
|
|
static void conf_hw(ec)
|
|
|
|
ether_card_t *ec;
|
|
|
|
{
|
2009-07-22 14:36:19 +02:00
|
|
|
static eth_stat_t empty_stat = {0, 0, 0, 0, 0, 0 /* ,... */ };
|
2005-09-04 22:08:22 +02:00
|
|
|
|
2010-05-18 00:22:53 +02:00
|
|
|
int confnr;
|
2009-07-22 14:36:19 +02:00
|
|
|
ec_conf_t *ecp;
|
2005-09-04 22:08:22 +02:00
|
|
|
|
2009-07-22 14:36:19 +02:00
|
|
|
ec->mode= EC_DISABLED; /* Superfluous */
|
2005-09-04 22:08:22 +02:00
|
|
|
|
2010-05-18 00:22:53 +02:00
|
|
|
/* Pick a default configuration. This hardly matters anymore. */
|
|
|
|
confnr= MIN(ec_instance, EC_CONF_NR-1);
|
|
|
|
|
|
|
|
ecp= &ec_conf[confnr];
|
2009-07-22 14:36:19 +02:00
|
|
|
update_conf(ec, ecp);
|
|
|
|
if (ec->mode != EC_ENABLED)
|
|
|
|
return;
|
2005-09-04 22:08:22 +02:00
|
|
|
|
2010-05-18 00:22:53 +02:00
|
|
|
if (!lance_probe(ec, ec_instance))
|
2009-07-22 14:36:19 +02:00
|
|
|
{
|
2005-09-04 22:08:22 +02:00
|
|
|
printf("%s: No ethernet card found on PCI-BIOS info.\n",
|
2009-07-22 14:36:19 +02:00
|
|
|
ec->port_name);
|
2005-09-04 22:08:22 +02:00
|
|
|
ec->mode= EC_DISABLED;
|
|
|
|
return;
|
2009-07-22 14:36:19 +02:00
|
|
|
}
|
2005-09-04 22:08:22 +02:00
|
|
|
|
2009-07-22 14:36:19 +02:00
|
|
|
/* XXX */ if (ec->ec_linmem == 0) ec->ec_linmem= 0xFFFF0000;
|
2005-09-04 22:08:22 +02:00
|
|
|
|
2009-07-22 14:36:19 +02:00
|
|
|
ec->flags = ECF_EMPTY;
|
|
|
|
ec->eth_stat = empty_stat;
|
2005-09-04 22:08:22 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/*===========================================================================*
|
|
|
|
* update_conf *
|
|
|
|
*===========================================================================*/
|
|
|
|
static void update_conf(ec, ecp)
|
|
|
|
ether_card_t *ec;
|
|
|
|
ec_conf_t *ecp;
|
|
|
|
{
|
2009-07-22 14:36:19 +02:00
|
|
|
long v;
|
2010-05-18 00:22:53 +02:00
|
|
|
char eckey[16];
|
2009-07-22 14:36:19 +02:00
|
|
|
static char ec_fmt[] = "x:d:x:x";
|
|
|
|
|
|
|
|
/* Get the default settings and modify them from the environment. */
|
2012-08-03 18:55:23 +02:00
|
|
|
strlcpy(eckey, "LANCE0", sizeof(eckey));
|
2010-05-18 00:22:53 +02:00
|
|
|
eckey[5] += ec_instance;
|
2009-07-22 14:36:19 +02:00
|
|
|
ec->mode= EC_SINK;
|
|
|
|
v= ecp->ec_port;
|
2010-05-18 00:22:53 +02:00
|
|
|
switch (env_parse(eckey, ec_fmt, 0, &v, 0x0000L, 0xFFFFL))
|
2009-07-22 14:36:19 +02:00
|
|
|
{
|
|
|
|
case EP_OFF:
|
|
|
|
ec->mode= EC_DISABLED;
|
|
|
|
break;
|
|
|
|
case EP_ON:
|
|
|
|
case EP_SET:
|
|
|
|
default:
|
|
|
|
ec->mode= EC_ENABLED; /* Might become disabled if
|
|
|
|
* all probes fail */
|
|
|
|
break;
|
|
|
|
}
|
2005-09-04 22:08:22 +02:00
|
|
|
|
2009-07-22 14:36:19 +02:00
|
|
|
ec->ec_port= v;
|
2005-09-04 22:08:22 +02:00
|
|
|
|
2009-07-22 14:36:19 +02:00
|
|
|
v= ecp->ec_irq | DEI_DEFAULT;
|
2010-05-18 00:22:53 +02:00
|
|
|
(void) env_parse(eckey, ec_fmt, 1, &v, 0L, (long) NR_IRQ_VECTORS - 1);
|
2009-07-22 14:36:19 +02:00
|
|
|
ec->ec_irq= v;
|
2005-09-04 22:08:22 +02:00
|
|
|
|
2009-07-22 14:36:19 +02:00
|
|
|
v= ecp->ec_mem;
|
2010-05-18 00:22:53 +02:00
|
|
|
(void) env_parse(eckey, ec_fmt, 2, &v, 0L, 0xFFFFFL);
|
2009-07-22 14:36:19 +02:00
|
|
|
ec->ec_linmem= v;
|
2005-09-04 22:08:22 +02:00
|
|
|
|
2009-07-22 14:36:19 +02:00
|
|
|
v= 0;
|
2010-05-18 00:22:53 +02:00
|
|
|
(void) env_parse(eckey, ec_fmt, 3, &v, 0x2000L, 0x8000L);
|
2009-07-22 14:36:19 +02:00
|
|
|
ec->ec_ramsize= v;
|
2005-09-04 22:08:22 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/*===========================================================================*
|
|
|
|
* ec_init *
|
|
|
|
*===========================================================================*/
|
|
|
|
static void ec_init(ec)
|
|
|
|
ether_card_t *ec;
|
|
|
|
{
|
2011-06-09 16:57:51 +02:00
|
|
|
int r;
|
2011-11-04 23:54:02 +01:00
|
|
|
#if VERBOSE
|
|
|
|
int i;
|
|
|
|
#endif
|
2005-09-04 22:08:22 +02:00
|
|
|
|
2009-07-22 14:36:19 +02:00
|
|
|
/* General initialization */
|
|
|
|
ec->flags = ECF_EMPTY;
|
|
|
|
lance_init_card(ec); /* Get mac_address, etc ...*/
|
2005-09-04 22:08:22 +02:00
|
|
|
|
2009-07-22 14:36:19 +02:00
|
|
|
ec_confaddr(ec);
|
2005-09-04 22:08:22 +02:00
|
|
|
|
|
|
|
#if VERBOSE
|
2009-07-22 14:36:19 +02:00
|
|
|
printf("%s: Ethernet address ", ec->port_name);
|
|
|
|
for (i= 0; i < 6; i++)
|
|
|
|
printf("%x%c", ec->mac_address.ea_addr[i],
|
|
|
|
i < 5 ? ':' : '\n');
|
2005-09-04 22:08:22 +02:00
|
|
|
#endif
|
|
|
|
|
2009-07-22 14:36:19 +02:00
|
|
|
/* Finish the initialization */
|
|
|
|
ec->flags |= ECF_ENABLED;
|
2005-09-04 22:08:22 +02:00
|
|
|
|
2009-07-22 14:36:19 +02:00
|
|
|
/* Set the interrupt handler */
|
|
|
|
ec->ec_hook = ec->ec_irq;
|
|
|
|
if ((r=sys_irqsetpolicy(ec->ec_irq, 0, &ec->ec_hook)) != OK)
|
|
|
|
printf("lance: error, couldn't set IRQ policy: %d\n", r);
|
2005-09-04 22:08:22 +02:00
|
|
|
|
2009-07-22 14:36:19 +02:00
|
|
|
return;
|
2005-09-04 22:08:22 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/*===========================================================================*
|
|
|
|
* reply *
|
|
|
|
*===========================================================================*/
|
2010-05-18 00:22:53 +02:00
|
|
|
static void reply(ec)
|
2005-09-04 22:08:22 +02:00
|
|
|
ether_card_t *ec;
|
|
|
|
{
|
2009-07-22 14:36:19 +02:00
|
|
|
message reply;
|
2010-05-18 00:22:53 +02:00
|
|
|
int flags,r;
|
2009-07-22 14:36:19 +02:00
|
|
|
|
2010-05-18 00:22:53 +02:00
|
|
|
flags = DL_NOFLAGS;
|
2009-07-22 14:36:19 +02:00
|
|
|
if (ec->flags & ECF_PACK_SEND)
|
2010-05-18 00:22:53 +02:00
|
|
|
flags |= DL_PACK_SEND;
|
2009-07-22 14:36:19 +02:00
|
|
|
if (ec->flags & ECF_PACK_RECV)
|
2010-05-18 00:22:53 +02:00
|
|
|
flags |= DL_PACK_RECV;
|
2009-07-22 14:36:19 +02:00
|
|
|
|
|
|
|
reply.m_type = DL_TASK_REPLY;
|
2010-05-18 00:22:53 +02:00
|
|
|
reply.DL_FLAGS = flags;
|
2009-07-22 14:36:19 +02:00
|
|
|
reply.DL_COUNT = ec->read_s;
|
|
|
|
|
|
|
|
r = send(ec->client, &reply);
|
|
|
|
if (r < 0)
|
2010-03-05 16:05:11 +01:00
|
|
|
panic("send failed: %d", r);
|
2005-09-04 22:08:22 +02:00
|
|
|
|
2009-07-22 14:36:19 +02:00
|
|
|
ec->read_s = 0;
|
|
|
|
ec->flags &= ~(ECF_PACK_SEND | ECF_PACK_RECV);
|
2005-09-04 22:08:22 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/*===========================================================================*
|
|
|
|
* mess_reply *
|
|
|
|
*===========================================================================*/
|
|
|
|
static void mess_reply(req, reply_mess)
|
|
|
|
message *req;
|
|
|
|
message *reply_mess;
|
|
|
|
{
|
2009-07-22 14:36:19 +02:00
|
|
|
if (send(req->m_source, reply_mess) != OK)
|
2010-03-05 16:05:11 +01:00
|
|
|
panic("unable to mess_reply");
|
2005-09-04 22:08:22 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/*===========================================================================*
|
|
|
|
* ec_confaddr *
|
|
|
|
*===========================================================================*/
|
|
|
|
static void ec_confaddr(ec)
|
|
|
|
ether_card_t *ec;
|
|
|
|
{
|
2009-07-22 14:36:19 +02:00
|
|
|
int i;
|
|
|
|
char eakey[16];
|
|
|
|
static char eafmt[]= "x:x:x:x:x:x";
|
|
|
|
long v;
|
2005-09-04 22:08:22 +02:00
|
|
|
|
2009-07-22 14:36:19 +02:00
|
|
|
/* User defined ethernet address? */
|
2012-08-03 18:55:23 +02:00
|
|
|
strlcpy(eakey, "LANCE0_EA", sizeof(eakey));
|
2010-05-18 00:22:53 +02:00
|
|
|
eakey[5] += ec_instance;
|
2005-09-04 22:08:22 +02:00
|
|
|
|
2009-07-22 14:36:19 +02:00
|
|
|
for (i = 0; i < 6; i++)
|
|
|
|
{
|
2005-09-04 22:08:22 +02:00
|
|
|
v= ec->mac_address.ea_addr[i];
|
|
|
|
if (env_parse(eakey, eafmt, i, &v, 0x00L, 0xFFL) != EP_SET)
|
2009-07-22 14:36:19 +02:00
|
|
|
break;
|
2005-09-04 22:08:22 +02:00
|
|
|
ec->mac_address.ea_addr[i]= v;
|
2009-07-22 14:36:19 +02:00
|
|
|
}
|
2005-09-04 22:08:22 +02:00
|
|
|
|
2009-07-22 14:36:19 +02:00
|
|
|
if (i != 0 && i != 6)
|
|
|
|
{
|
2005-09-04 22:08:22 +02:00
|
|
|
/* It's all or nothing; force a panic. */
|
|
|
|
(void) env_parse(eakey, "?", 0, &v, 0L, 0L);
|
2009-07-22 14:36:19 +02:00
|
|
|
}
|
2005-09-04 22:08:22 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/*===========================================================================*
|
|
|
|
* ec_reinit *
|
|
|
|
*===========================================================================*/
|
|
|
|
static void ec_reinit(ec)
|
|
|
|
ether_card_t *ec;
|
|
|
|
{
|
2009-07-22 14:36:19 +02:00
|
|
|
int i;
|
|
|
|
unsigned short ioaddr = ec->ec_port;
|
|
|
|
|
|
|
|
/* stop */
|
|
|
|
write_csr(ioaddr, LANCE_CSR0, LANCE_CSR0_STOP);
|
|
|
|
|
|
|
|
/* purge Tx-ring */
|
|
|
|
tx_slot_nr = cur_tx_slot_nr = 0;
|
|
|
|
for (i=0; i<TX_RING_SIZE; i++)
|
|
|
|
{
|
|
|
|
lp->tx_ring[i].u.base = 0;
|
|
|
|
isstored[i]=0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* re-init Rx-ring */
|
|
|
|
rx_slot_nr = 0;
|
|
|
|
for (i=0; i<RX_RING_SIZE; i++)
|
|
|
|
{
|
2005-09-04 22:08:22 +02:00
|
|
|
lp->rx_ring[i].buf_length = -ETH_FRAME_LEN;
|
|
|
|
lp->rx_ring[i].u.addr[3] |= 0x80;
|
2009-07-22 14:36:19 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
/* Set 'Receive Mode' */
|
|
|
|
if (ec->flags & ECF_PROMISC)
|
|
|
|
{
|
|
|
|
write_csr(ioaddr, LANCE_CSR15, LANCE_CSR15_PROM);
|
|
|
|
}
|
|
|
|
else
|
|
|
|
{
|
2005-09-04 22:08:22 +02:00
|
|
|
if (ec->flags & (ECF_BROAD | ECF_MULTI))
|
2009-07-22 14:36:19 +02:00
|
|
|
{
|
|
|
|
write_csr(ioaddr, LANCE_CSR15, 0x0000);
|
|
|
|
}
|
2005-09-04 22:08:22 +02:00
|
|
|
else
|
2009-07-22 14:36:19 +02:00
|
|
|
{
|
|
|
|
write_csr(ioaddr, LANCE_CSR15, LANCE_CSR15_DRCVBC);
|
|
|
|
}
|
|
|
|
}
|
2005-09-04 22:08:22 +02:00
|
|
|
|
2009-07-22 14:36:19 +02:00
|
|
|
/* start && enable interrupt */
|
|
|
|
write_csr(ioaddr, LANCE_CSR0,
|
|
|
|
LANCE_CSR0_IDON|LANCE_CSR0_IENA|LANCE_CSR0_STRT);
|
2005-09-04 22:08:22 +02:00
|
|
|
|
2009-07-22 14:36:19 +02:00
|
|
|
return;
|
2005-09-04 22:08:22 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
/*===========================================================================*
|
|
|
|
* ec_check_ints *
|
|
|
|
*===========================================================================*/
|
|
|
|
static void ec_check_ints(ec)
|
|
|
|
ether_card_t *ec;
|
|
|
|
{
|
2009-07-22 14:36:19 +02:00
|
|
|
int must_restart = 0;
|
|
|
|
int check,status;
|
|
|
|
int isr = 0x0000;
|
|
|
|
unsigned short ioaddr = ec->ec_port;
|
2005-09-04 22:08:22 +02:00
|
|
|
|
2009-07-22 14:36:19 +02:00
|
|
|
if (!(ec->flags & ECF_ENABLED))
|
2010-03-05 16:05:11 +01:00
|
|
|
panic("got premature interrupt");
|
2005-09-04 22:08:22 +02:00
|
|
|
|
2009-07-22 14:36:19 +02:00
|
|
|
for (;;)
|
|
|
|
{
|
|
|
|
#if VERBOSE
|
|
|
|
printf("ETH: Reading ISR...");
|
2005-09-04 22:08:22 +02:00
|
|
|
#endif
|
2009-07-22 14:36:19 +02:00
|
|
|
isr = read_csr(ioaddr, LANCE_CSR0);
|
|
|
|
if (isr & (LANCE_CSR0_ERR|LANCE_CSR0_RINT|LANCE_CSR0_TINT)) {
|
|
|
|
write_csr(ioaddr, LANCE_CSR0,
|
|
|
|
isr & ~(LANCE_CSR0_IENA|LANCE_CSR0_TDMD|LANCE_CSR0_STOP
|
|
|
|
|LANCE_CSR0_STRT|LANCE_CSR0_INIT) );
|
|
|
|
}
|
|
|
|
write_csr(ioaddr, LANCE_CSR0,
|
|
|
|
LANCE_CSR0_BABL|LANCE_CSR0_CERR|LANCE_CSR0_MISS|LANCE_CSR0_MERR
|
|
|
|
|LANCE_CSR0_IDON|LANCE_CSR0_IENA);
|
|
|
|
|
2005-09-04 22:08:22 +02:00
|
|
|
#define ISR_RST 0x0000
|
|
|
|
|
2009-07-22 14:36:19 +02:00
|
|
|
if ((isr & (LANCE_CSR0_TINT|LANCE_CSR0_RINT|LANCE_CSR0_MISS
|
|
|
|
|LANCE_CSR0_BABL|LANCE_CSR0_ERR)) == 0x0000)
|
|
|
|
{
|
|
|
|
#if VERBOSE
|
|
|
|
printf("OK\n");
|
2005-09-04 22:08:22 +02:00
|
|
|
#endif
|
2009-07-22 14:36:19 +02:00
|
|
|
break;
|
|
|
|
}
|
2005-09-04 22:08:22 +02:00
|
|
|
|
2009-07-22 14:36:19 +02:00
|
|
|
if (isr & LANCE_CSR0_MISS)
|
|
|
|
{
|
|
|
|
#if VERBOSE
|
|
|
|
printf("RX Missed Frame\n");
|
2005-09-04 22:08:22 +02:00
|
|
|
#endif
|
2009-07-22 14:36:19 +02:00
|
|
|
ec->eth_stat.ets_recvErr++;
|
|
|
|
}
|
|
|
|
if ((isr & LANCE_CSR0_BABL) || (isr & LANCE_CSR0_TINT))
|
|
|
|
{
|
|
|
|
if (isr & LANCE_CSR0_BABL)
|
|
|
|
{
|
|
|
|
#if VERBOSE
|
|
|
|
printf("TX Timeout\n");
|
2005-09-04 22:08:22 +02:00
|
|
|
#endif
|
2009-07-22 14:36:19 +02:00
|
|
|
ec->eth_stat.ets_sendErr++;
|
|
|
|
}
|
|
|
|
if (isr & LANCE_CSR0_TINT)
|
|
|
|
{
|
|
|
|
#if VERBOSE
|
|
|
|
printf("TX INT\n");
|
2005-09-04 22:08:22 +02:00
|
|
|
#endif
|
2009-07-22 14:36:19 +02:00
|
|
|
/* status check: restart if needed. */
|
|
|
|
status = lp->tx_ring[cur_tx_slot_nr].u.base;
|
2005-09-04 22:08:22 +02:00
|
|
|
|
2009-07-22 14:36:19 +02:00
|
|
|
/* ??? */
|
|
|
|
if (status & 0x40000000)
|
|
|
|
{
|
|
|
|
status = lp->tx_ring[cur_tx_slot_nr].misc;
|
|
|
|
ec->eth_stat.ets_sendErr++;
|
|
|
|
if (status & 0x0400)
|
|
|
|
ec->eth_stat.ets_transAb++;
|
|
|
|
if (status & 0x0800)
|
|
|
|
ec->eth_stat.ets_carrSense++;
|
|
|
|
if (status & 0x1000)
|
|
|
|
ec->eth_stat.ets_OWC++;
|
|
|
|
if (status & 0x4000)
|
|
|
|
{
|
|
|
|
ec->eth_stat.ets_fifoUnder++;
|
|
|
|
must_restart=1;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
else
|
|
|
|
{
|
|
|
|
if (status & 0x18000000)
|
|
|
|
ec->eth_stat.ets_collision++;
|
|
|
|
ec->eth_stat.ets_packetT++;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
/* transmit a packet on the next slot if it exists. */
|
|
|
|
check = 0;
|
|
|
|
if (isstored[cur_tx_slot_nr]==1)
|
|
|
|
{
|
|
|
|
/* free the tx-slot just transmitted */
|
|
|
|
isstored[cur_tx_slot_nr]=0;
|
2012-08-03 18:55:23 +02:00
|
|
|
cur_tx_slot_nr = (cur_tx_slot_nr + 1) & TX_RING_MOD_MASK;
|
2009-07-22 14:36:19 +02:00
|
|
|
|
|
|
|
/* next tx-slot is ready? */
|
|
|
|
if (isstored[cur_tx_slot_nr]==1)
|
|
|
|
check=1;
|
|
|
|
else
|
|
|
|
check=0;
|
|
|
|
}
|
|
|
|
else
|
|
|
|
{
|
2010-03-05 16:05:11 +01:00
|
|
|
panic("got premature TX INT..");
|
2009-07-22 14:36:19 +02:00
|
|
|
}
|
|
|
|
if (check==1)
|
|
|
|
{
|
|
|
|
lp->tx_ring[cur_tx_slot_nr].u.addr[3] = 0x83;
|
|
|
|
write_csr(ioaddr, LANCE_CSR0, LANCE_CSR0_IENA|LANCE_CSR0_TDMD);
|
|
|
|
}
|
|
|
|
/* we set a buffered message in the slot if it exists. */
|
|
|
|
/* and transmit it, if needed. */
|
|
|
|
if (ec->flags & ECF_SEND_AVAIL)
|
|
|
|
ec_send(ec);
|
|
|
|
}
|
|
|
|
if (isr & LANCE_CSR0_RINT)
|
|
|
|
{
|
|
|
|
#if VERBOSE
|
|
|
|
printf("RX INT\n");
|
|
|
|
#endif
|
|
|
|
ec_recv(ec);
|
|
|
|
}
|
2005-09-04 22:08:22 +02:00
|
|
|
|
2009-07-22 14:36:19 +02:00
|
|
|
if (isr & ISR_RST)
|
|
|
|
{
|
|
|
|
ec->flags = ECF_STOPPED;
|
|
|
|
#if VERBOSE
|
|
|
|
printf("ISR_RST\n");
|
2005-09-04 22:08:22 +02:00
|
|
|
#endif
|
2009-07-22 14:36:19 +02:00
|
|
|
break;
|
2005-09-04 22:08:22 +02:00
|
|
|
}
|
2009-07-22 14:36:19 +02:00
|
|
|
|
|
|
|
/* ??? cf. lance driver on linux */
|
|
|
|
if (must_restart == 1)
|
2005-09-04 22:08:22 +02:00
|
|
|
{
|
2009-07-22 14:36:19 +02:00
|
|
|
#if VERBOSE
|
|
|
|
printf("ETH: restarting...\n");
|
2005-09-04 22:08:22 +02:00
|
|
|
#endif
|
2009-07-22 14:36:19 +02:00
|
|
|
/* stop */
|
|
|
|
write_csr(ioaddr, LANCE_CSR0, LANCE_CSR0_STOP);
|
|
|
|
/* start */
|
|
|
|
write_csr(ioaddr, LANCE_CSR0, LANCE_CSR0_STRT);
|
2005-09-04 22:08:22 +02:00
|
|
|
}
|
2009-07-22 14:36:19 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
if ((ec->flags & (ECF_READING|ECF_STOPPED)) == (ECF_READING|ECF_STOPPED))
|
|
|
|
{
|
|
|
|
#if VERBOSE
|
|
|
|
printf("ETH: resetting...\n");
|
|
|
|
#endif
|
|
|
|
ec_reset(ec);
|
|
|
|
}
|
2005-09-04 22:08:22 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
/*===========================================================================*
|
|
|
|
* ec_reset *
|
|
|
|
*===========================================================================*/
|
|
|
|
static void ec_reset(ec)
|
|
|
|
ether_card_t *ec;
|
|
|
|
{
|
2009-07-22 14:36:19 +02:00
|
|
|
/* Stop/start the chip, and clear all RX,TX-slots */
|
|
|
|
unsigned short ioaddr = ec->ec_port;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
/* stop */
|
|
|
|
write_csr(ioaddr, LANCE_CSR0, LANCE_CSR0_STOP);
|
|
|
|
/* start */
|
|
|
|
write_csr(ioaddr, LANCE_CSR0, LANCE_CSR0_STRT);
|
|
|
|
|
|
|
|
/* purge Tx-ring */
|
|
|
|
tx_slot_nr = cur_tx_slot_nr = 0;
|
|
|
|
for (i=0; i<TX_RING_SIZE; i++)
|
|
|
|
{
|
|
|
|
lp->tx_ring[i].u.base = 0;
|
|
|
|
isstored[i]=0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* re-init Rx-ring */
|
|
|
|
rx_slot_nr = 0;
|
|
|
|
for (i=0; i<RX_RING_SIZE; i++)
|
|
|
|
{
|
2005-09-04 22:08:22 +02:00
|
|
|
lp->rx_ring[i].buf_length = -ETH_FRAME_LEN;
|
|
|
|
lp->rx_ring[i].u.addr[3] |= 0x80;
|
2009-07-22 14:36:19 +02:00
|
|
|
}
|
2005-09-04 22:08:22 +02:00
|
|
|
|
2009-07-22 14:36:19 +02:00
|
|
|
/* store a buffered message on the slot if exists */
|
|
|
|
ec_send(ec);
|
|
|
|
ec->flags &= ~ECF_STOPPED;
|
2005-09-04 22:08:22 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
/*===========================================================================*
|
|
|
|
* ec_send *
|
|
|
|
*===========================================================================*/
|
|
|
|
static void ec_send(ec)
|
|
|
|
ether_card_t *ec;
|
|
|
|
{
|
2009-07-22 14:36:19 +02:00
|
|
|
/* from ec_check_ints() or ec_reset(). */
|
|
|
|
/* this function proccesses the buffered message. (slot/transmit) */
|
|
|
|
if (!(ec->flags & ECF_SEND_AVAIL))
|
|
|
|
return;
|
2005-09-04 22:08:22 +02:00
|
|
|
|
2009-07-22 14:36:19 +02:00
|
|
|
ec->flags &= ~ECF_SEND_AVAIL;
|
|
|
|
switch(ec->sendmsg.m_type)
|
|
|
|
{
|
|
|
|
case DL_WRITEV_S: do_vwrite_s(&ec->sendmsg, TRUE); break;
|
|
|
|
default:
|
2010-03-05 16:05:11 +01:00
|
|
|
panic("wrong type: %d", ec->sendmsg.m_type);
|
2005-09-04 22:08:22 +02:00
|
|
|
break;
|
2009-07-22 14:36:19 +02:00
|
|
|
}
|
2005-09-04 22:08:22 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
/*===========================================================================*
|
2006-07-10 14:43:38 +02:00
|
|
|
* do_vread_s *
|
2005-09-04 22:08:22 +02:00
|
|
|
*===========================================================================*/
|
2010-04-07 13:25:51 +02:00
|
|
|
static void do_vread_s(const message *mp)
|
2005-09-04 22:08:22 +02:00
|
|
|
{
|
2010-05-18 00:22:53 +02:00
|
|
|
int count, r;
|
2009-07-22 14:36:19 +02:00
|
|
|
ether_card_t *ec;
|
|
|
|
|
2010-05-18 00:22:53 +02:00
|
|
|
ec= &ec_state;
|
|
|
|
|
|
|
|
ec->client= mp->m_source;
|
2009-07-22 14:36:19 +02:00
|
|
|
count = mp->DL_COUNT;
|
|
|
|
|
Server/driver protocols: no longer allow third-party copies.
Before safecopies, the IO_ENDPT and DL_ENDPT message fields were needed
to know which actual process to copy data from/to, as that process may
not always be the caller. Now that we have full safecopy support, these
fields have become useless for that purpose: the owner of the grant is
*always* the caller. Allowing the caller to supply another endpoint is
in fact dangerous, because the callee may then end up using a grant
from a third party. One could call this a variant of the confused
deputy problem.
From now on, safecopy calls should always use the caller's endpoint as
grant owner. This fully obsoletes the DL_ENDPT field in the
inet/ethernet protocol. IO_ENDPT has other uses besides identifying the
grant owner though. This patch renames IO_ENDPT to USER_ENDPT, not only
because that is a more fitting name (it should never be used for I/O
after all), but also in order to intentionally break any old system
source code outside the base system. If this patch breaks your code,
fixing it is fairly simple:
- DL_ENDPT should be replaced with m_source;
- IO_ENDPT should be replaced with m_source when used for safecopies;
- IO_ENDPT should be replaced with USER_ENDPT for any other use, e.g.
when setting REP_ENDPT, matching requests in CANCEL calls, getting
DEV_SELECT flags, and retrieving of the real user process's endpoint
in DEV_OPEN.
The changes in this patch are binary backward compatible.
2011-04-11 19:35:05 +02:00
|
|
|
r = sys_safecopyfrom(mp->m_source, mp->DL_GRANT, 0,
|
2009-07-22 14:36:19 +02:00
|
|
|
(vir_bytes)ec->read_iovec.iod_iovec,
|
|
|
|
(count > IOVEC_NR ? IOVEC_NR : count) *
|
2012-06-16 03:46:15 +02:00
|
|
|
sizeof(iovec_s_t));
|
2009-07-22 14:36:19 +02:00
|
|
|
if (r != OK)
|
2010-03-05 16:05:11 +01:00
|
|
|
panic("do_vread_s: sys_safecopyfrom failed: %d", r);
|
2009-07-22 14:36:19 +02:00
|
|
|
ec->read_iovec.iod_iovec_s = count;
|
Server/driver protocols: no longer allow third-party copies.
Before safecopies, the IO_ENDPT and DL_ENDPT message fields were needed
to know which actual process to copy data from/to, as that process may
not always be the caller. Now that we have full safecopy support, these
fields have become useless for that purpose: the owner of the grant is
*always* the caller. Allowing the caller to supply another endpoint is
in fact dangerous, because the callee may then end up using a grant
from a third party. One could call this a variant of the confused
deputy problem.
From now on, safecopy calls should always use the caller's endpoint as
grant owner. This fully obsoletes the DL_ENDPT field in the
inet/ethernet protocol. IO_ENDPT has other uses besides identifying the
grant owner though. This patch renames IO_ENDPT to USER_ENDPT, not only
because that is a more fitting name (it should never be used for I/O
after all), but also in order to intentionally break any old system
source code outside the base system. If this patch breaks your code,
fixing it is fairly simple:
- DL_ENDPT should be replaced with m_source;
- IO_ENDPT should be replaced with m_source when used for safecopies;
- IO_ENDPT should be replaced with USER_ENDPT for any other use, e.g.
when setting REP_ENDPT, matching requests in CANCEL calls, getting
DEV_SELECT flags, and retrieving of the real user process's endpoint
in DEV_OPEN.
The changes in this patch are binary backward compatible.
2011-04-11 19:35:05 +02:00
|
|
|
ec->read_iovec.iod_proc_nr = mp->m_source;
|
2010-03-04 17:15:26 +01:00
|
|
|
ec->read_iovec.iod_grant = (cp_grant_id_t) mp->DL_GRANT;
|
2009-07-22 14:36:19 +02:00
|
|
|
ec->read_iovec.iod_iovec_offset = 0;
|
|
|
|
|
|
|
|
ec->tmp_iovec = ec->read_iovec;
|
|
|
|
|
|
|
|
ec->flags |= ECF_READING;
|
|
|
|
|
|
|
|
ec_recv(ec);
|
|
|
|
|
|
|
|
if ((ec->flags & (ECF_READING|ECF_STOPPED)) == (ECF_READING|ECF_STOPPED))
|
|
|
|
ec_reset(ec);
|
2010-05-18 00:22:53 +02:00
|
|
|
reply(ec);
|
2005-09-04 22:08:22 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
/*===========================================================================*
|
|
|
|
* ec_recv *
|
|
|
|
*===========================================================================*/
|
|
|
|
static void ec_recv(ec)
|
|
|
|
ether_card_t *ec;
|
|
|
|
{
|
2009-07-22 14:36:19 +02:00
|
|
|
vir_bytes length;
|
|
|
|
int packet_processed;
|
|
|
|
int status;
|
|
|
|
unsigned short ioaddr = ec->ec_port;
|
|
|
|
|
|
|
|
if ((ec->flags & ECF_READING)==0)
|
|
|
|
return;
|
|
|
|
if (!(ec->flags & ECF_ENABLED))
|
|
|
|
return;
|
|
|
|
|
|
|
|
/* we check all the received slots until find a properly received packet */
|
|
|
|
packet_processed = FALSE;
|
|
|
|
while (!packet_processed)
|
|
|
|
{
|
2005-09-04 22:08:22 +02:00
|
|
|
status = lp->rx_ring[rx_slot_nr].u.base >> 24;
|
|
|
|
if ( (status & 0x80) == 0x00 )
|
2009-07-22 14:36:19 +02:00
|
|
|
{
|
|
|
|
status = lp->rx_ring[rx_slot_nr].u.base >> 24;
|
|
|
|
|
|
|
|
/* ??? */
|
|
|
|
if (status != 0x03)
|
|
|
|
{
|
|
|
|
if (status & 0x01)
|
|
|
|
ec->eth_stat.ets_recvErr++;
|
|
|
|
if (status & 0x04)
|
|
|
|
ec->eth_stat.ets_fifoOver++;
|
|
|
|
if (status & 0x08)
|
|
|
|
ec->eth_stat.ets_CRCerr++;
|
|
|
|
if (status & 0x10)
|
|
|
|
ec->eth_stat.ets_OVW++;
|
|
|
|
if (status & 0x20)
|
|
|
|
ec->eth_stat.ets_frameAll++;
|
|
|
|
length = 0;
|
|
|
|
}
|
|
|
|
else
|
|
|
|
{
|
|
|
|
ec->eth_stat.ets_packetR++;
|
|
|
|
length = lp->rx_ring[rx_slot_nr].msg_length;
|
|
|
|
}
|
|
|
|
if (length > 0)
|
|
|
|
{
|
|
|
|
ec_nic2user(ec, (int)(lp->rbuf[rx_slot_nr]),
|
|
|
|
&ec->read_iovec, 0, length);
|
2005-09-04 22:08:22 +02:00
|
|
|
|
2009-07-22 14:36:19 +02:00
|
|
|
ec->read_s = length;
|
|
|
|
ec->flags |= ECF_PACK_RECV;
|
|
|
|
ec->flags &= ~ECF_READING;
|
|
|
|
packet_processed = TRUE;
|
|
|
|
}
|
|
|
|
/* set up this slot again, and we move to the next slot */
|
|
|
|
lp->rx_ring[rx_slot_nr].buf_length = -ETH_FRAME_LEN;
|
|
|
|
lp->rx_ring[rx_slot_nr].u.addr[3] |= 0x80;
|
|
|
|
|
|
|
|
write_csr(ioaddr, LANCE_CSR0,
|
|
|
|
LANCE_CSR0_BABL|LANCE_CSR0_CERR|LANCE_CSR0_MISS
|
|
|
|
|LANCE_CSR0_MERR|LANCE_CSR0_IDON|LANCE_CSR0_IENA);
|
|
|
|
|
2012-08-03 18:55:23 +02:00
|
|
|
rx_slot_nr = (rx_slot_nr + 1) & RX_RING_MOD_MASK;
|
2009-07-22 14:36:19 +02:00
|
|
|
}
|
2005-09-04 22:08:22 +02:00
|
|
|
else
|
2009-07-22 14:36:19 +02:00
|
|
|
break;
|
|
|
|
}
|
2005-09-04 22:08:22 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
/*===========================================================================*
|
2006-07-10 14:43:38 +02:00
|
|
|
* do_vwrite_s *
|
2005-09-04 22:08:22 +02:00
|
|
|
*===========================================================================*/
|
2006-07-10 14:43:38 +02:00
|
|
|
static void do_vwrite_s(mp, from_int)
|
2005-09-04 22:08:22 +02:00
|
|
|
message *mp;
|
|
|
|
int from_int;
|
|
|
|
{
|
2010-05-18 00:22:53 +02:00
|
|
|
int count, check, r;
|
2009-07-22 14:36:19 +02:00
|
|
|
ether_card_t *ec;
|
|
|
|
unsigned short ioaddr;
|
2005-09-04 22:08:22 +02:00
|
|
|
|
2010-05-18 00:22:53 +02:00
|
|
|
ec = &ec_state;
|
|
|
|
|
|
|
|
ec->client= mp->m_source;
|
2009-07-22 14:36:19 +02:00
|
|
|
count = mp->DL_COUNT;
|
2005-09-04 22:08:22 +02:00
|
|
|
|
2009-07-22 14:36:19 +02:00
|
|
|
if (isstored[tx_slot_nr]==1)
|
|
|
|
{
|
2005-09-04 22:08:22 +02:00
|
|
|
/* all slots are used, so this message is buffered */
|
|
|
|
ec->sendmsg= *mp;
|
|
|
|
ec->flags |= ECF_SEND_AVAIL;
|
2010-05-18 00:22:53 +02:00
|
|
|
reply(ec);
|
2005-09-04 22:08:22 +02:00
|
|
|
return;
|
2009-07-22 14:36:19 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
/* convert the message to write_iovec */
|
Server/driver protocols: no longer allow third-party copies.
Before safecopies, the IO_ENDPT and DL_ENDPT message fields were needed
to know which actual process to copy data from/to, as that process may
not always be the caller. Now that we have full safecopy support, these
fields have become useless for that purpose: the owner of the grant is
*always* the caller. Allowing the caller to supply another endpoint is
in fact dangerous, because the callee may then end up using a grant
from a third party. One could call this a variant of the confused
deputy problem.
From now on, safecopy calls should always use the caller's endpoint as
grant owner. This fully obsoletes the DL_ENDPT field in the
inet/ethernet protocol. IO_ENDPT has other uses besides identifying the
grant owner though. This patch renames IO_ENDPT to USER_ENDPT, not only
because that is a more fitting name (it should never be used for I/O
after all), but also in order to intentionally break any old system
source code outside the base system. If this patch breaks your code,
fixing it is fairly simple:
- DL_ENDPT should be replaced with m_source;
- IO_ENDPT should be replaced with m_source when used for safecopies;
- IO_ENDPT should be replaced with USER_ENDPT for any other use, e.g.
when setting REP_ENDPT, matching requests in CANCEL calls, getting
DEV_SELECT flags, and retrieving of the real user process's endpoint
in DEV_OPEN.
The changes in this patch are binary backward compatible.
2011-04-11 19:35:05 +02:00
|
|
|
r = sys_safecopyfrom(mp->m_source, mp->DL_GRANT, 0,
|
2009-07-22 14:36:19 +02:00
|
|
|
(vir_bytes)ec->write_iovec.iod_iovec,
|
|
|
|
(count > IOVEC_NR ? IOVEC_NR : count) *
|
2012-06-16 03:46:15 +02:00
|
|
|
sizeof(iovec_s_t));
|
2009-07-22 14:36:19 +02:00
|
|
|
if (r != OK)
|
2010-03-05 16:05:11 +01:00
|
|
|
panic("do_vwrite_s: sys_safecopyfrom failed: %d", r);
|
2009-07-22 14:36:19 +02:00
|
|
|
ec->write_iovec.iod_iovec_s = count;
|
Server/driver protocols: no longer allow third-party copies.
Before safecopies, the IO_ENDPT and DL_ENDPT message fields were needed
to know which actual process to copy data from/to, as that process may
not always be the caller. Now that we have full safecopy support, these
fields have become useless for that purpose: the owner of the grant is
*always* the caller. Allowing the caller to supply another endpoint is
in fact dangerous, because the callee may then end up using a grant
from a third party. One could call this a variant of the confused
deputy problem.
From now on, safecopy calls should always use the caller's endpoint as
grant owner. This fully obsoletes the DL_ENDPT field in the
inet/ethernet protocol. IO_ENDPT has other uses besides identifying the
grant owner though. This patch renames IO_ENDPT to USER_ENDPT, not only
because that is a more fitting name (it should never be used for I/O
after all), but also in order to intentionally break any old system
source code outside the base system. If this patch breaks your code,
fixing it is fairly simple:
- DL_ENDPT should be replaced with m_source;
- IO_ENDPT should be replaced with m_source when used for safecopies;
- IO_ENDPT should be replaced with USER_ENDPT for any other use, e.g.
when setting REP_ENDPT, matching requests in CANCEL calls, getting
DEV_SELECT flags, and retrieving of the real user process's endpoint
in DEV_OPEN.
The changes in this patch are binary backward compatible.
2011-04-11 19:35:05 +02:00
|
|
|
ec->write_iovec.iod_proc_nr = mp->m_source;
|
2009-07-22 14:36:19 +02:00
|
|
|
ec->write_iovec.iod_grant = mp->DL_GRANT;
|
|
|
|
ec->write_iovec.iod_iovec_offset = 0;
|
|
|
|
|
|
|
|
ec->tmp_iovec = ec->write_iovec;
|
|
|
|
ec->write_s = calc_iovec_size(&ec->tmp_iovec);
|
|
|
|
|
|
|
|
/* copy write_iovec to the slot on DMA address */
|
|
|
|
ec_user2nic(ec, &ec->write_iovec, 0,
|
|
|
|
(int)(lp->tbuf[tx_slot_nr]), ec->write_s);
|
|
|
|
/* set-up for transmitting, and transmit it if needed. */
|
|
|
|
lp->tx_ring[tx_slot_nr].buf_length = -ec->write_s;
|
|
|
|
lp->tx_ring[tx_slot_nr].misc = 0x0;
|
|
|
|
lp->tx_ring[tx_slot_nr].u.base
|
|
|
|
= virt_to_bus(lp->tbuf[tx_slot_nr]) & 0xffffff;
|
|
|
|
isstored[tx_slot_nr]=1;
|
|
|
|
if (cur_tx_slot_nr == tx_slot_nr)
|
|
|
|
check=1;
|
|
|
|
else
|
|
|
|
check=0;
|
2012-08-03 18:55:23 +02:00
|
|
|
tx_slot_nr = (tx_slot_nr + 1) & TX_RING_MOD_MASK;
|
2009-07-22 14:36:19 +02:00
|
|
|
|
|
|
|
if (check == 1)
|
|
|
|
{
|
2005-09-04 22:08:22 +02:00
|
|
|
ioaddr = ec->ec_port;
|
|
|
|
lp->tx_ring[cur_tx_slot_nr].u.addr[3] = 0x83;
|
2009-07-22 14:36:19 +02:00
|
|
|
write_csr(ioaddr, LANCE_CSR0, LANCE_CSR0_IENA|LANCE_CSR0_TDMD);
|
|
|
|
}
|
2005-09-04 22:08:22 +02:00
|
|
|
|
2009-07-22 14:36:19 +02:00
|
|
|
ec->flags |= ECF_PACK_SEND;
|
2005-09-04 22:08:22 +02:00
|
|
|
|
2009-07-22 14:36:19 +02:00
|
|
|
/* reply by calling do_int() if this function is called from interrupt. */
|
|
|
|
if (from_int)
|
|
|
|
return;
|
2010-05-18 00:22:53 +02:00
|
|
|
reply(ec);
|
2005-09-04 22:08:22 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/*===========================================================================*
|
|
|
|
* ec_user2nic *
|
|
|
|
*===========================================================================*/
|
|
|
|
static void ec_user2nic(ec, iovp, offset, nic_addr, count)
|
|
|
|
ether_card_t *ec;
|
|
|
|
iovec_dat_t *iovp;
|
|
|
|
vir_bytes offset;
|
|
|
|
int nic_addr;
|
|
|
|
vir_bytes count;
|
|
|
|
{
|
2009-07-22 14:36:19 +02:00
|
|
|
int bytes, i, r;
|
2005-09-04 22:08:22 +02:00
|
|
|
|
2009-07-22 14:36:19 +02:00
|
|
|
i= 0;
|
|
|
|
while (count > 0)
|
|
|
|
{
|
2005-09-04 22:08:22 +02:00
|
|
|
if (i >= IOVEC_NR)
|
2009-07-22 14:36:19 +02:00
|
|
|
{
|
|
|
|
ec_next_iovec(iovp);
|
|
|
|
i= 0;
|
|
|
|
continue;
|
|
|
|
}
|
2005-09-04 22:08:22 +02:00
|
|
|
if (offset >= iovp->iod_iovec[i].iov_size)
|
2009-07-22 14:36:19 +02:00
|
|
|
{
|
|
|
|
offset -= iovp->iod_iovec[i].iov_size;
|
|
|
|
i++;
|
|
|
|
continue;
|
|
|
|
}
|
2005-09-04 22:08:22 +02:00
|
|
|
bytes = iovp->iod_iovec[i].iov_size - offset;
|
|
|
|
if (bytes > count)
|
2009-07-22 14:36:19 +02:00
|
|
|
bytes = count;
|
2005-09-04 22:08:22 +02:00
|
|
|
|
2006-07-10 14:43:38 +02:00
|
|
|
if ( (r=sys_safecopyfrom(iovp->iod_proc_nr,
|
2009-07-22 14:36:19 +02:00
|
|
|
iovp->iod_iovec[i].iov_grant, offset,
|
2012-06-16 03:46:15 +02:00
|
|
|
nic_addr, bytes )) != OK )
|
2010-03-05 16:05:11 +01:00
|
|
|
panic("ec_user2nic: sys_safecopyfrom failed: %d", r);
|
2009-07-22 14:36:19 +02:00
|
|
|
|
2005-09-04 22:08:22 +02:00
|
|
|
count -= bytes;
|
|
|
|
nic_addr += bytes;
|
|
|
|
offset += bytes;
|
2009-07-22 14:36:19 +02:00
|
|
|
}
|
2005-09-04 22:08:22 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
/*===========================================================================*
|
|
|
|
* ec_nic2user *
|
|
|
|
*===========================================================================*/
|
|
|
|
static void ec_nic2user(ec, nic_addr, iovp, offset, count)
|
|
|
|
ether_card_t *ec;
|
|
|
|
int nic_addr;
|
|
|
|
iovec_dat_t *iovp;
|
|
|
|
vir_bytes offset;
|
|
|
|
vir_bytes count;
|
|
|
|
{
|
2009-07-22 14:36:19 +02:00
|
|
|
int bytes, i, r;
|
2005-09-04 22:08:22 +02:00
|
|
|
|
2009-07-22 14:36:19 +02:00
|
|
|
i= 0;
|
|
|
|
while (count > 0)
|
|
|
|
{
|
2005-09-04 22:08:22 +02:00
|
|
|
if (i >= IOVEC_NR)
|
2009-07-22 14:36:19 +02:00
|
|
|
{
|
|
|
|
ec_next_iovec(iovp);
|
|
|
|
i= 0;
|
|
|
|
continue;
|
|
|
|
}
|
2005-09-04 22:08:22 +02:00
|
|
|
if (offset >= iovp->iod_iovec[i].iov_size)
|
2009-07-22 14:36:19 +02:00
|
|
|
{
|
|
|
|
offset -= iovp->iod_iovec[i].iov_size;
|
|
|
|
i++;
|
|
|
|
continue;
|
|
|
|
}
|
2005-09-04 22:08:22 +02:00
|
|
|
bytes = iovp->iod_iovec[i].iov_size - offset;
|
|
|
|
if (bytes > count)
|
2009-07-22 14:36:19 +02:00
|
|
|
bytes = count;
|
2006-07-10 14:43:38 +02:00
|
|
|
if ( (r=sys_safecopyto( iovp->iod_proc_nr, iovp->iod_iovec[i].iov_grant,
|
2012-06-16 03:46:15 +02:00
|
|
|
offset, nic_addr, bytes )) != OK )
|
2010-03-05 16:05:11 +01:00
|
|
|
panic("ec_nic2user: sys_safecopyto failed: %d", r);
|
2005-09-04 22:08:22 +02:00
|
|
|
|
|
|
|
count -= bytes;
|
|
|
|
nic_addr += bytes;
|
|
|
|
offset += bytes;
|
2009-07-22 14:36:19 +02:00
|
|
|
}
|
2005-09-04 22:08:22 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/*===========================================================================*
|
|
|
|
* calc_iovec_size *
|
|
|
|
*===========================================================================*/
|
2010-02-19 11:00:32 +01:00
|
|
|
static int calc_iovec_size(iovec_dat_t *iovp)
|
2005-09-04 22:08:22 +02:00
|
|
|
{
|
2009-07-22 14:36:19 +02:00
|
|
|
int size,i;
|
2005-09-04 22:08:22 +02:00
|
|
|
|
2009-07-22 14:36:19 +02:00
|
|
|
size = i = 0;
|
2005-09-04 22:08:22 +02:00
|
|
|
|
2009-07-22 14:36:19 +02:00
|
|
|
while (i < iovp->iod_iovec_s)
|
|
|
|
{
|
2005-09-04 22:08:22 +02:00
|
|
|
if (i >= IOVEC_NR)
|
2009-07-22 14:36:19 +02:00
|
|
|
{
|
|
|
|
ec_next_iovec(iovp);
|
|
|
|
i= 0;
|
|
|
|
continue;
|
|
|
|
}
|
2005-09-04 22:08:22 +02:00
|
|
|
size += iovp->iod_iovec[i].iov_size;
|
|
|
|
i++;
|
2009-07-22 14:36:19 +02:00
|
|
|
}
|
2005-09-04 22:08:22 +02:00
|
|
|
|
2009-07-22 14:36:19 +02:00
|
|
|
return size;
|
2005-09-04 22:08:22 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
/*===========================================================================*
|
2009-07-22 14:36:19 +02:00
|
|
|
* ec_next_iovec *
|
2005-09-04 22:08:22 +02:00
|
|
|
*===========================================================================*/
|
|
|
|
static void ec_next_iovec(iovp)
|
|
|
|
iovec_dat_t *iovp;
|
|
|
|
{
|
2009-07-22 14:36:19 +02:00
|
|
|
int r;
|
|
|
|
|
|
|
|
iovp->iod_iovec_s -= IOVEC_NR;
|
|
|
|
iovp->iod_iovec_offset += IOVEC_NR * sizeof(iovec_s_t);
|
|
|
|
|
|
|
|
r = sys_safecopyfrom(iovp->iod_proc_nr, iovp->iod_grant,
|
|
|
|
iovp->iod_iovec_offset,
|
|
|
|
(vir_bytes)iovp->iod_iovec,
|
|
|
|
(iovp->iod_iovec_s > IOVEC_NR ?
|
|
|
|
IOVEC_NR : iovp->iod_iovec_s) *
|
2012-06-16 03:46:15 +02:00
|
|
|
sizeof(iovec_s_t));
|
2009-07-22 14:36:19 +02:00
|
|
|
if (r != OK)
|
2010-03-05 16:05:11 +01:00
|
|
|
panic("ec_next_iovec: sys_safecopyfrom failed: %d", r);
|
2005-09-04 22:08:22 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/*===========================================================================*
|
2006-07-10 14:43:38 +02:00
|
|
|
* do_getstat_s *
|
2005-09-04 22:08:22 +02:00
|
|
|
*===========================================================================*/
|
2006-07-10 14:43:38 +02:00
|
|
|
static void do_getstat_s(mp)
|
2005-09-04 22:08:22 +02:00
|
|
|
message *mp;
|
|
|
|
{
|
2010-05-18 00:22:53 +02:00
|
|
|
int r;
|
2009-07-22 14:36:19 +02:00
|
|
|
ether_card_t *ec;
|
2005-09-04 22:08:22 +02:00
|
|
|
|
2010-05-18 00:22:53 +02:00
|
|
|
ec= &ec_state;
|
2005-09-04 22:08:22 +02:00
|
|
|
|
Server/driver protocols: no longer allow third-party copies.
Before safecopies, the IO_ENDPT and DL_ENDPT message fields were needed
to know which actual process to copy data from/to, as that process may
not always be the caller. Now that we have full safecopy support, these
fields have become useless for that purpose: the owner of the grant is
*always* the caller. Allowing the caller to supply another endpoint is
in fact dangerous, because the callee may then end up using a grant
from a third party. One could call this a variant of the confused
deputy problem.
From now on, safecopy calls should always use the caller's endpoint as
grant owner. This fully obsoletes the DL_ENDPT field in the
inet/ethernet protocol. IO_ENDPT has other uses besides identifying the
grant owner though. This patch renames IO_ENDPT to USER_ENDPT, not only
because that is a more fitting name (it should never be used for I/O
after all), but also in order to intentionally break any old system
source code outside the base system. If this patch breaks your code,
fixing it is fairly simple:
- DL_ENDPT should be replaced with m_source;
- IO_ENDPT should be replaced with m_source when used for safecopies;
- IO_ENDPT should be replaced with USER_ENDPT for any other use, e.g.
when setting REP_ENDPT, matching requests in CANCEL calls, getting
DEV_SELECT flags, and retrieving of the real user process's endpoint
in DEV_OPEN.
The changes in this patch are binary backward compatible.
2011-04-11 19:35:05 +02:00
|
|
|
r = sys_safecopyto(mp->m_source, mp->DL_GRANT, 0,
|
2012-06-16 03:46:15 +02:00
|
|
|
(vir_bytes)&ec->eth_stat, sizeof(ec->eth_stat));
|
2007-04-23 17:38:00 +02:00
|
|
|
|
2009-07-22 14:36:19 +02:00
|
|
|
if (r != OK)
|
2010-03-05 16:05:11 +01:00
|
|
|
panic("do_getstat_s: sys_safecopyto failed: %d", r);
|
2005-09-04 22:08:22 +02:00
|
|
|
|
2009-07-22 14:36:19 +02:00
|
|
|
mp->m_type= DL_STAT_REPLY;
|
|
|
|
r= send(mp->m_source, mp);
|
|
|
|
if (r != OK)
|
2010-03-05 16:05:11 +01:00
|
|
|
panic("do_getstat_s: send failed: %d", r);
|
2005-09-04 22:08:22 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
/*===========================================================================*
|
2010-05-18 00:22:53 +02:00
|
|
|
* lance_stop *
|
2005-09-04 22:08:22 +02:00
|
|
|
*===========================================================================*/
|
2010-05-18 00:22:53 +02:00
|
|
|
static void lance_stop(ec)
|
|
|
|
ether_card_t *ec;
|
2005-09-04 22:08:22 +02:00
|
|
|
{
|
2009-07-22 14:36:19 +02:00
|
|
|
unsigned short ioaddr;
|
2005-09-04 22:08:22 +02:00
|
|
|
|
2009-07-22 14:36:19 +02:00
|
|
|
if (!(ec->flags & ECF_ENABLED))
|
|
|
|
return;
|
2005-09-04 22:08:22 +02:00
|
|
|
|
2009-07-22 14:36:19 +02:00
|
|
|
ioaddr = ec->ec_port;
|
2005-09-04 22:08:22 +02:00
|
|
|
|
2009-07-22 14:36:19 +02:00
|
|
|
/* stop */
|
|
|
|
write_csr(ioaddr, LANCE_CSR0, LANCE_CSR0_STOP);
|
2005-09-04 22:08:22 +02:00
|
|
|
|
2009-07-22 14:36:19 +02:00
|
|
|
/* Reset */
|
|
|
|
in_word(ioaddr+LANCE_RESET);
|
|
|
|
|
|
|
|
ec->flags = ECF_EMPTY;
|
2005-09-04 22:08:22 +02:00
|
|
|
}
|
|
|
|
|
2009-07-22 14:36:19 +02:00
|
|
|
/*===========================================================================*
|
|
|
|
* getAddressing *
|
|
|
|
*===========================================================================*/
|
2005-09-04 22:08:22 +02:00
|
|
|
static void getAddressing(devind, ec)
|
|
|
|
int devind;
|
|
|
|
ether_card_t *ec;
|
|
|
|
{
|
2009-07-22 14:36:19 +02:00
|
|
|
unsigned int membase, ioaddr;
|
|
|
|
int reg, irq;
|
|
|
|
|
2012-03-08 00:01:25 +01:00
|
|
|
for (reg = PCI_BAR; reg <= PCI_BAR_6; reg += 4)
|
2009-07-22 14:36:19 +02:00
|
|
|
{
|
|
|
|
ioaddr = pci_attr_r32(devind, reg);
|
|
|
|
|
2012-03-08 00:01:25 +01:00
|
|
|
if ((ioaddr & PCI_BAR_IO_MASK) == 0 || (ioaddr & PCI_BAR_IO) == 0)
|
2009-07-22 14:36:19 +02:00
|
|
|
continue;
|
|
|
|
/* Strip the I/O address out of the returned value */
|
2012-03-08 00:01:25 +01:00
|
|
|
ioaddr &= PCI_BAR_IO_MASK;
|
2009-07-22 14:36:19 +02:00
|
|
|
/* Get the memory base address */
|
2012-03-08 00:01:25 +01:00
|
|
|
membase = pci_attr_r32(devind, PCI_BAR_2);
|
2009-07-22 14:36:19 +02:00
|
|
|
/* KK: Get the IRQ number */
|
2012-03-08 00:01:25 +01:00
|
|
|
irq = pci_attr_r8(devind, PCI_IPR);
|
2009-07-22 14:36:19 +02:00
|
|
|
if (irq)
|
2012-03-08 00:01:25 +01:00
|
|
|
irq = pci_attr_r8(devind, PCI_ILR);
|
2009-07-22 14:36:19 +02:00
|
|
|
|
|
|
|
ec->ec_linmem = membase;
|
|
|
|
ec->ec_port = ioaddr;
|
|
|
|
ec->ec_irq = irq;
|
|
|
|
}
|
2005-09-04 22:08:22 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
/*===========================================================================*
|
2009-07-22 14:36:19 +02:00
|
|
|
* lance_probe *
|
2005-09-04 22:08:22 +02:00
|
|
|
*===========================================================================*/
|
2010-05-10 22:19:55 +02:00
|
|
|
static int lance_probe(ec, skip)
|
2005-09-04 22:08:22 +02:00
|
|
|
ether_card_t *ec;
|
2010-05-10 22:19:55 +02:00
|
|
|
int skip;
|
2005-09-04 22:08:22 +02:00
|
|
|
{
|
2010-01-22 23:01:08 +01:00
|
|
|
unsigned short pci_cmd;
|
2009-07-22 14:36:19 +02:00
|
|
|
unsigned short ioaddr;
|
|
|
|
int lance_version, chip_version;
|
2012-03-07 00:49:16 +01:00
|
|
|
int devind, r;
|
2009-07-22 14:36:19 +02:00
|
|
|
u16_t vid, did;
|
|
|
|
|
2012-03-07 00:49:16 +01:00
|
|
|
r= pci_first_dev(&devind, &vid, &did);
|
|
|
|
if (r == 0)
|
|
|
|
return 0;
|
2009-07-22 14:36:19 +02:00
|
|
|
|
2012-03-07 00:49:16 +01:00
|
|
|
while (skip--)
|
2009-07-22 14:36:19 +02:00
|
|
|
{
|
|
|
|
r= pci_next_dev(&devind, &vid, &did);
|
|
|
|
if (!r)
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
pci_reserve(devind);
|
|
|
|
|
|
|
|
getAddressing(devind, ec);
|
|
|
|
|
|
|
|
|
|
|
|
/* ===== Bus Master ? ===== */
|
|
|
|
pci_cmd = pci_attr_r32(devind, PCI_CR);
|
2012-03-08 00:01:25 +01:00
|
|
|
if (!(pci_cmd & PCI_CR_MAST_EN)) {
|
|
|
|
pci_cmd |= PCI_CR_MAST_EN;
|
2009-07-22 14:36:19 +02:00
|
|
|
pci_attr_w32(devind, PCI_CR, pci_cmd);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* ===== Probe Details ===== */
|
|
|
|
ioaddr = ec->ec_port;
|
|
|
|
|
|
|
|
/* Reset */
|
|
|
|
in_word(ioaddr+LANCE_RESET);
|
|
|
|
|
|
|
|
if (read_csr(ioaddr, LANCE_CSR0) != LANCE_CSR0_STOP)
|
|
|
|
{
|
2005-09-04 22:08:22 +02:00
|
|
|
ec->mode=EC_DISABLED;
|
2009-07-22 14:36:19 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
/* Probe Chip Version */
|
|
|
|
out_word(ioaddr+LANCE_ADDR, 88); /* Get the version of the chip */
|
|
|
|
if (in_word(ioaddr+LANCE_ADDR) != 88)
|
|
|
|
lance_version = 0;
|
|
|
|
else
|
|
|
|
{
|
|
|
|
chip_version = read_csr(ioaddr, LANCE_CSR88);
|
|
|
|
chip_version |= read_csr(ioaddr, LANCE_CSR89) << 16;
|
|
|
|
|
2005-09-04 22:08:22 +02:00
|
|
|
if ((chip_version & 0xfff) != 0x3)
|
2009-07-22 14:36:19 +02:00
|
|
|
{
|
|
|
|
ec->mode=EC_DISABLED;
|
|
|
|
}
|
2005-09-04 22:08:22 +02:00
|
|
|
chip_version = (chip_version >> 12) & 0xffff;
|
|
|
|
for (lance_version = 1; chip_table[lance_version].id_number != 0;
|
|
|
|
++lance_version)
|
2009-07-22 14:36:19 +02:00
|
|
|
if (chip_table[lance_version].id_number == chip_version)
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
#if VERBOSE
|
|
|
|
printf("%s: %s at %X:%d\n",
|
|
|
|
ec->port_name, chip_table[lance_version].name,
|
|
|
|
ec->ec_port, ec->ec_irq);
|
2005-09-04 22:08:22 +02:00
|
|
|
#endif
|
|
|
|
|
2009-07-22 14:36:19 +02:00
|
|
|
return lance_version;
|
2005-09-04 22:08:22 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
/*===========================================================================*
|
2009-07-22 14:36:19 +02:00
|
|
|
* lance_init_card *
|
2005-09-04 22:08:22 +02:00
|
|
|
*===========================================================================*/
|
|
|
|
static void lance_init_card(ec)
|
|
|
|
ether_card_t *ec;
|
|
|
|
{
|
2009-07-22 14:36:19 +02:00
|
|
|
int i;
|
|
|
|
Address l = (vir_bytes)lance_buf;
|
|
|
|
unsigned short ioaddr = ec->ec_port;
|
|
|
|
|
|
|
|
/* ============= setup init_block(cf. lance_probe1) ================ */
|
|
|
|
/* make sure data structure is 8-byte aligned and below 16MB (for DMA) */
|
|
|
|
|
|
|
|
lp = (struct lance_interface *)l;
|
|
|
|
|
|
|
|
/* disable Tx and Rx */
|
|
|
|
lp->init_block.mode = LANCE_CSR15_DTX|LANCE_CSR15_DRX;
|
|
|
|
lp->init_block.filter[0] = lp->init_block.filter[1] = 0x0;
|
|
|
|
/* using multiple Rx/Tx buffer */
|
|
|
|
lp->init_block.rx_ring
|
|
|
|
= (virt_to_bus(&lp->rx_ring) & 0xffffff) | RX_RING_LEN_BITS;
|
|
|
|
lp->init_block.tx_ring
|
|
|
|
= (virt_to_bus(&lp->tx_ring) & 0xffffff) | TX_RING_LEN_BITS;
|
|
|
|
|
|
|
|
l = virt_to_bus(&lp->init_block);
|
|
|
|
write_csr(ioaddr, LANCE_CSR1, (unsigned short)l);
|
|
|
|
write_csr(ioaddr, LANCE_CSR2, (unsigned short)(l >> 16));
|
|
|
|
write_csr(ioaddr, LANCE_CSR4,
|
|
|
|
LANCE_CSR4_APAD_XMT|LANCE_CSR4_MFCOM|LANCE_CSR4_RCVCCOM
|
|
|
|
|LANCE_CSR4_TXSTRTM|LANCE_CSR4_JABM);
|
|
|
|
|
|
|
|
/* ============= Get MAC address (cf. lance_probe1) ================ */
|
|
|
|
for (i = 0; i < 6; ++i)
|
|
|
|
ec->mac_address.ea_addr[i]=in_byte(ioaddr+LANCE_ETH_ADDR+i);
|
|
|
|
|
|
|
|
/* ============ (re)start init_block(cf. lance_reset) =============== */
|
|
|
|
/* Reset the LANCE */
|
|
|
|
(void)in_word(ioaddr+LANCE_RESET);
|
|
|
|
|
|
|
|
/* ----- Re-initialize the LANCE ----- */
|
|
|
|
/* Set station address */
|
|
|
|
for (i = 0; i < 6; ++i)
|
|
|
|
lp->init_block.phys_addr[i] = ec->mac_address.ea_addr[i];
|
|
|
|
/* Preset the receive ring headers */
|
|
|
|
for (i=0; i<RX_RING_SIZE; i++)
|
|
|
|
{
|
|
|
|
lp->rx_ring[i].buf_length = -ETH_FRAME_LEN;
|
|
|
|
/* OWN */
|
|
|
|
lp->rx_ring[i].u.base = virt_to_bus(lp->rbuf[i]) & 0xffffff;
|
|
|
|
/* we set the top byte as the very last thing */
|
|
|
|
lp->rx_ring[i].u.addr[3] = 0x80;
|
|
|
|
}
|
|
|
|
/* Preset the transmitting ring headers */
|
|
|
|
for (i=0; i<TX_RING_SIZE; i++)
|
|
|
|
{
|
|
|
|
lp->tx_ring[i].u.base = 0;
|
|
|
|
isstored[i] = 0;
|
|
|
|
}
|
|
|
|
/* enable Rx and Tx */
|
|
|
|
lp->init_block.mode = 0x0;
|
|
|
|
|
|
|
|
l = (Address)virt_to_bus(&lp->init_block);
|
|
|
|
write_csr(ioaddr, LANCE_CSR1, (short)l);
|
|
|
|
write_csr(ioaddr, LANCE_CSR2, (short)(l >> 16));
|
|
|
|
write_csr(ioaddr, LANCE_CSR4,
|
|
|
|
LANCE_CSR4_APAD_XMT|LANCE_CSR4_MFCOM|LANCE_CSR4_RCVCCOM
|
|
|
|
|LANCE_CSR4_TXSTRTM|LANCE_CSR4_JABM);
|
|
|
|
|
|
|
|
/* ----- start when init done. ----- */
|
|
|
|
/* stop */
|
|
|
|
write_csr(ioaddr, LANCE_CSR0, LANCE_CSR0_STOP);
|
|
|
|
/* init */
|
|
|
|
write_csr(ioaddr, LANCE_CSR0, LANCE_CSR0_INIT);
|
|
|
|
/* poll for IDON */
|
|
|
|
for (i = 10000; i > 0; --i)
|
|
|
|
if (read_csr(ioaddr, LANCE_CSR0) & LANCE_CSR0_IDON)
|
|
|
|
break;
|
|
|
|
|
|
|
|
/* Set 'Multicast Table' */
|
|
|
|
for (i=0;i<4;++i)
|
|
|
|
{
|
|
|
|
write_csr(ioaddr, LANCE_CSR8 + i, 0xffff);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Set 'Receive Mode' */
|
|
|
|
if (ec->flags & ECF_PROMISC)
|
|
|
|
{
|
|
|
|
write_csr(ioaddr, LANCE_CSR15, LANCE_CSR15_PROM);
|
|
|
|
}
|
|
|
|
else
|
|
|
|
{
|
2005-09-04 22:08:22 +02:00
|
|
|
if (ec->flags & (ECF_BROAD | ECF_MULTI))
|
2009-07-22 14:36:19 +02:00
|
|
|
{
|
|
|
|
write_csr(ioaddr, LANCE_CSR15, 0x0000);
|
|
|
|
}
|
2005-09-04 22:08:22 +02:00
|
|
|
else
|
2009-07-22 14:36:19 +02:00
|
|
|
{
|
|
|
|
write_csr(ioaddr, LANCE_CSR15, LANCE_CSR15_DRCVBC);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/* start && enable interrupt */
|
|
|
|
write_csr(ioaddr, LANCE_CSR0,
|
|
|
|
LANCE_CSR0_IDON|LANCE_CSR0_IENA|LANCE_CSR0_STRT);
|
|
|
|
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*===========================================================================*
|
|
|
|
* in_byte *
|
|
|
|
*===========================================================================*/
|
|
|
|
static u8_t in_byte(port_t port)
|
|
|
|
{
|
|
|
|
int r;
|
|
|
|
u32_t value;
|
|
|
|
|
|
|
|
r= sys_inb(port, &value);
|
|
|
|
if (r != OK)
|
2010-03-05 16:05:11 +01:00
|
|
|
panic("sys_inb failed: %d", r);
|
2009-07-22 14:36:19 +02:00
|
|
|
return value;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*===========================================================================*
|
|
|
|
* in_word *
|
|
|
|
*===========================================================================*/
|
|
|
|
static u16_t in_word(port_t port)
|
|
|
|
{
|
|
|
|
int r;
|
|
|
|
u32_t value;
|
|
|
|
|
|
|
|
r= sys_inw(port, &value);
|
|
|
|
if (r != OK)
|
2010-03-05 16:05:11 +01:00
|
|
|
panic("sys_inw failed: %d", r);
|
2009-07-22 14:36:19 +02:00
|
|
|
return value;
|
|
|
|
}
|
2005-09-04 22:08:22 +02:00
|
|
|
|
2009-07-22 14:36:19 +02:00
|
|
|
|
|
|
|
/*===========================================================================*
|
|
|
|
* out_word *
|
|
|
|
*===========================================================================*/
|
|
|
|
static void out_word(port_t port, u16_t value)
|
|
|
|
{
|
|
|
|
int r;
|
|
|
|
|
|
|
|
r= sys_outw(port, value);
|
|
|
|
if (r != OK)
|
2010-03-05 16:05:11 +01:00
|
|
|
panic("sys_outw failed: %d", r);
|
2009-07-22 14:36:19 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
/*===========================================================================*
|
|
|
|
* read_csr *
|
|
|
|
*===========================================================================*/
|
|
|
|
static u16_t read_csr(port_t ioaddr, u16_t csrno)
|
|
|
|
{
|
|
|
|
out_word(ioaddr+LANCE_ADDR, csrno);
|
|
|
|
return in_word(ioaddr+LANCE_DATA);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*===========================================================================*
|
|
|
|
* write_csr *
|
|
|
|
*===========================================================================*/
|
|
|
|
static void write_csr(port_t ioaddr, u16_t csrno, u16_t value)
|
|
|
|
{
|
|
|
|
out_word(ioaddr+LANCE_ADDR, csrno);
|
|
|
|
out_word(ioaddr+LANCE_DATA, value);
|
2005-09-04 22:08:22 +02:00
|
|
|
}
|