minix/drivers/lance/lance.c

1782 lines
51 KiB
C
Raw Normal View History

/*
* lance.c
*
* This file contains a ethernet device driver for AMD LANCE based ethernet
* cards.
*
* The valid messages and their parameters are:
*
2009-07-22 14:36:19 +02:00
* m_type DL_PORT DL_PROC DL_COUNT DL_MODE DL_ADDR DL_GRANT
2006-07-10 14:43:38 +02:00
* |------------+----------+---------+----------+---------+---------+---------|
2009-07-22 14:36:19 +02:00
* | HARDINT | | | | | | |
2006-07-10 14:43:38 +02:00
* |------------|----------|---------|----------|---------|---------|---------|
2009-07-22 14:36:19 +02:00
* | DL_WRITEV_S| port nr | proc nr | count | mode | | grant |
2006-07-10 14:43:38 +02:00
* |------------|----------|---------|----------|---------|---------|---------|
2009-07-22 14:36:19 +02:00
* | DL_READV_S | port nr | proc nr | count | | | grant |
2006-07-10 14:43:38 +02:00
* |------------|----------|---------|----------|---------|---------|---------|
2009-07-22 14:36:19 +02:00
* | DL_CONF | port nr | proc nr | | mode | address | |
2006-07-10 14:43:38 +02:00
* |------------|----------|---------|----------|---------|---------|---------|
2009-07-22 14:36:19 +02:00
* |DL_GETSTAT_S| port nr | proc nr | | | | grant |
2006-07-10 14:43:38 +02:00
* |------------|----------|---------|----------|---------|---------|---------|
2009-07-22 14:36:19 +02:00
* | DL_STOP | port_nr | | | | | |
2006-07-10 14:43:38 +02:00
* |------------|----------|---------|----------|---------|---------|---------|
*
* The messages sent are:
*
* m-type DL_POR T DL_PROC DL_COUNT DL_STAT DL_CLCK
* |------------|----------|---------|----------|---------|---------|
* |DL_TASK_REPL| port nr | proc nr | rd-count | err|stat| clock |
* |------------|----------|---------|----------|---------|---------|
*
* m_type m3_i1 m3_i2 m3_ca1
* |------------+---------+-----------+---------------|
2006-07-10 14:43:38 +02:00
* |DL_CONF_REPL| port nr | last port | ethernet addr |
* |------------|---------|-----------|---------------|
*
* Created: Jul 27, 2002 by Kazuya Kodama <kazuya@nii.ac.jp>
* Adapted for Minix 3: Sep 05, 2005 by Joren l'Ami <jwlami@cs.vu.nl>
*/
2009-07-22 14:36:19 +02:00
#define VERBOSE 0 /* Verbose debugging output */
#define LANCE_FKEY 0 /* Use function key to dump Lance stats */
#include "../drivers.h"
#include <net/hton.h>
#include <net/gen/ether.h>
#include <net/gen/eth_io.h>
#include <assert.h>
#include <minix/syslib.h>
#include <minix/endpoint.h>
2005-12-02 15:45:10 +01:00
#include <ibm/pci.h>
2009-07-22 14:36:19 +02:00
#include <minix/ds.h>
#include "lance.h"
static ether_card_t ec_table[EC_PORT_NR_MAX];
static int eth_tasknr= ANY;
static u16_t eth_ign_proto;
/* Configuration */
typedef struct ec_conf
{
2009-07-22 14:36:19 +02:00
port_t ec_port;
int ec_irq;
phys_bytes ec_mem;
char *ec_envvar;
} ec_conf_t;
/* We hardly use these. Just "LANCE0=on/off" "LANCE1=on/off" mean. */
ec_conf_t ec_conf[]= /* Card addresses */
{
2009-07-22 14:36:19 +02:00
/* I/O port, IRQ, Buffer address, Env. var, Buf selector. */
{ 0x1000, 9, 0x00000, "LANCE0" },
{ 0xD000, 15, 0x00000, "LANCE1" },
};
/* Actually, we use PCI-BIOS info. */
PRIVATE struct pcitab
{
2009-07-22 14:36:19 +02:00
u16_t vid;
u16_t did;
int checkclass;
} pcitab[]=
{
2009-07-22 14:36:19 +02:00
{ PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_LANCE, 0 }, /* AMD LANCE */
2009-07-22 14:36:19 +02:00
{ 0x0000, 0x0000, 0 }
};
/* General */
_PROTOTYPE( static void do_init, (message *mp) );
_PROTOTYPE( static void ec_init, (ether_card_t *ec) );
_PROTOTYPE( static void ec_confaddr, (ether_card_t *ec) );
_PROTOTYPE( static void ec_reinit, (ether_card_t *ec) );
_PROTOTYPE( static void ec_check_ints, (ether_card_t *ec) );
_PROTOTYPE( static void conf_hw, (ether_card_t *ec) );
_PROTOTYPE( static void update_conf, (ether_card_t *ec, ec_conf_t *ecp) );
_PROTOTYPE( static void mess_reply, (message *req, message *reply) );
_PROTOTYPE( static void do_int, (ether_card_t *ec) );
_PROTOTYPE( static void reply,
2009-07-22 14:36:19 +02:00
(ether_card_t *ec, int err, int may_block) );
_PROTOTYPE( static void ec_reset, (ether_card_t *ec) );
_PROTOTYPE( static void ec_send, (ether_card_t *ec) );
_PROTOTYPE( static void ec_recv, (ether_card_t *ec) );
2006-07-10 14:43:38 +02:00
_PROTOTYPE( static void do_vwrite_s,
2009-07-22 14:36:19 +02:00
(message *mp, int from_int) );
_PROTOTYPE( static void do_vread_s, (message *mp) );
_PROTOTYPE( static void ec_user2nic,
(ether_card_t *dep, iovec_dat_t *iovp,
vir_bytes offset, int nic_addr,
vir_bytes count) );
_PROTOTYPE( static void ec_nic2user,
2009-07-22 14:36:19 +02:00
(ether_card_t *ec, int nic_addr,
iovec_dat_t *iovp, vir_bytes offset,
vir_bytes count) );
_PROTOTYPE( static int calc_iovec_size, (iovec_dat_t *iovp) );
_PROTOTYPE( static void ec_next_iovec, (iovec_dat_t *iovp) );
2006-07-10 14:43:38 +02:00
_PROTOTYPE( static void do_getstat_s, (message *mp) );
_PROTOTYPE( static void do_stop, (message *mp) );
_PROTOTYPE( static void do_getname, (message *mp) );
2009-07-22 14:36:19 +02:00
_PROTOTYPE( static void lance_dump, (void) );
_PROTOTYPE( static void lance_stop, (void) );
_PROTOTYPE( static void getAddressing, (int devind, ether_card_t *ec) );
/* probe+init LANCE cards */
_PROTOTYPE( static int lance_probe, (ether_card_t *ec) );
_PROTOTYPE( static void lance_init_card, (ether_card_t *ec) );
2009-07-22 14:36:19 +02:00
/* Accesses Lance Control and Status Registers */
_PROTOTYPE( static u8_t in_byte, (port_t port) );
_PROTOTYPE( static u16_t in_word, (port_t port) );
_PROTOTYPE( static void out_word, (port_t port, u16_t value) );
_PROTOTYPE( static u16_t read_csr, (port_t ioaddr, u16_t csrno) );
_PROTOTYPE( static void write_csr, (port_t ioaddr, u16_t csrno, u16_t value));
/* --- LANCE --- */
/* General */
#define Address unsigned long
#define virt_to_bus(x) (vir2phys((unsigned long)x))
unsigned long vir2phys( unsigned long x )
{
2009-07-22 14:36:19 +02:00
int r;
unsigned long value;
if ( (r=sys_umap( SELF, VM_D, x, 4, &value )) != OK ) {
printf("lance: umap of 0x%lx failed\n",x );
panic( "lance", "sys_umap failed", r );
}
return value;
}
/* DMA limitations */
2009-07-22 14:36:19 +02:00
#define DMA_ADDR_MASK 0xFFFFFF /* mask to verify DMA address is 24-bit */
#define CORRECT_DMA_MEM() ( (virt_to_bus(lance_buf + sizeof(struct lance_interface)) & ~DMA_ADDR_MASK) == 0 )
#define ETH_FRAME_LEN 1518
#define LANCE_MUST_PAD 0x00000001
#define LANCE_ENABLE_AUTOSELECT 0x00000002
#define LANCE_SELECT_PHONELINE 0x00000004
#define LANCE_MUST_UNRESET 0x00000008
static const struct lance_chip_type
{
2009-07-22 14:36:19 +02:00
int id_number;
const char *name;
int flags;
} chip_table[] = {
2009-07-22 14:36:19 +02:00
{0x0000, "LANCE 7990", /* Ancient lance chip. */
LANCE_MUST_PAD + LANCE_MUST_UNRESET},
{0x0003, "PCnet/ISA 79C960", /* 79C960 PCnet/ISA. */
LANCE_ENABLE_AUTOSELECT},
{0x2260, "PCnet/ISA+ 79C961", /* 79C961 PCnet/ISA+, Plug-n-Play. */
LANCE_ENABLE_AUTOSELECT},
{0x2420, "PCnet/PCI 79C970", /* 79C970 or 79C974 PCnet-SCSI, PCI. */
LANCE_ENABLE_AUTOSELECT},
{0x2430, "PCnet32", /* 79C965 PCnet for VL bus. */
LANCE_ENABLE_AUTOSELECT},
{0x2621, "PCnet/PCI-II 79C970A", /* 79C970A PCInetPCI II. */
LANCE_ENABLE_AUTOSELECT},
{0x2625, "PCnet-FAST III 79C973",/* 79C973 PCInet-FAST III. */
LANCE_ENABLE_AUTOSELECT},
{0x2626, "PCnet/HomePNA 79C978",
LANCE_ENABLE_AUTOSELECT|LANCE_SELECT_PHONELINE},
{0x0, "PCnet (unknown)",
LANCE_ENABLE_AUTOSELECT},
};
/* ############## for LANCE device ############## */
#define LANCE_ETH_ADDR 0x0
#define LANCE_DATA 0x10
#define LANCE_ADDR 0x12
#define LANCE_RESET 0x14
#define LANCE_BUS_IF 0x16
#define LANCE_TOTAL_SIZE 0x18
/* Use 2^4=16 {Rx,Tx} buffers */
#define LANCE_LOG_RX_BUFFERS 4
#define RX_RING_SIZE (1 << (LANCE_LOG_RX_BUFFERS))
#define RX_RING_MOD_MASK (RX_RING_SIZE - 1)
#define RX_RING_LEN_BITS ((LANCE_LOG_RX_BUFFERS) << 29)
#define LANCE_LOG_TX_BUFFERS 4
#define TX_RING_SIZE (1 << (LANCE_LOG_TX_BUFFERS))
#define TX_RING_MOD_MASK (TX_RING_SIZE - 1)
#define TX_RING_LEN_BITS ((LANCE_LOG_TX_BUFFERS) << 29)
/* for lance_interface */
struct lance_init_block
{
2009-07-22 14:36:19 +02:00
unsigned short mode;
unsigned char phys_addr[6];
unsigned long filter[2];
Address rx_ring;
Address tx_ring;
};
struct lance_rx_head
{
2009-07-22 14:36:19 +02:00
union {
Address base;
unsigned char addr[4];
} u;
short buf_length; /* 2s complement */
short msg_length;
};
struct lance_tx_head
{
2009-07-22 14:36:19 +02:00
union {
Address base;
unsigned char addr[4];
} u;
short buf_length; /* 2s complement */
short misc;
};
struct lance_interface
{
2009-07-22 14:36:19 +02:00
struct lance_init_block init_block;
struct lance_rx_head rx_ring[RX_RING_SIZE];
struct lance_tx_head tx_ring[TX_RING_SIZE];
unsigned char rbuf[RX_RING_SIZE][ETH_FRAME_LEN];
unsigned char tbuf[TX_RING_SIZE][ETH_FRAME_LEN];
};
/* =============== global variables =============== */
static struct lance_interface *lp;
#define LANCE_BUF_SIZE (sizeof(struct lance_interface))
static char *lance_buf = NULL;
static int rx_slot_nr = 0; /* Rx-slot number */
static int tx_slot_nr = 0; /* Tx-slot number */
static int cur_tx_slot_nr = 0; /* Tx-slot number */
static char isstored[TX_RING_SIZE]; /* Tx-slot in-use */
static const char *progname;
2008-12-17 02:20:15 +01:00
phys_bytes lance_buf_phys;
Basic System Event Framework (SEF) with ping and live update. SYSLIB CHANGES: - SEF must be used by every system process and is thereby part of the system library. - The framework provides a receive() interface (sef_receive) for system processes to automatically catch known system even messages and process them. - SEF provides a default behavior for each type of system event, but allows system processes to register callbacks to override the default behavior. - Custom (local to the process) or predefined (provided by SEF) callback implementations can be registered to SEF. - SEF currently includes support for 2 types of system events: 1. SEF Ping. The event occurs every time RS sends a ping to figure out whether a system process is still alive. The default callback implementation provided by SEF is to notify RS back to let it know the process is alive and kicking. 2. SEF Live update. The event occurs every time RS sends a prepare to update message to let a system process know an update is available and to prepare for it. The live update support is very basic for now. SEF only deals with verifying if the prepare state can be supported by the process, dumping the state for debugging purposes, and providing an event-driven programming model to the process to react to state changes check-in when ready to update. - SEF should be extended in the future to integrate support for more types of system events. Ideally, all the cross-cutting concerns should be integrated into SEF to avoid duplicating code and ease extensibility. Examples include: * PM notify messages primarily used at shutdown. * SYSTEM notify messages primarily used for signals. * CLOCK notify messages used for system alarms. * Debug messages. IS could still be in charge of fkey handling but would forward the debug message to the target process (e.g. PM, if the user requested debug information about PM). SEF would then catch the message and do nothing unless the process has registered an appropriate callback to deal with the event. This simplifies the programming model to print debug information, avoids duplicating code, and reduces the effort to print debug information. SYSTEM PROCESSES CHANGES: - Every system process registers SEF callbacks it needs to override the default system behavior and calls sef_startup() right after being started. - sef_startup() does almost nothing now, but will be extended in the future to support callbacks of its own to let RS control and synchronize with every system process at initialization time. - Every system process calls sef_receive() now rather than receive() directly, to let SEF handle predefined system events. RS CHANGES: - RS supports a basic single-component live update protocol now, as follows: * When an update command is issued (via "service update *"), RS notifies the target system process to prepare for a specific update state. * If the process doesn't respond back in time, the update is aborted. * When the process responds back, RS kills it and marks it for refreshing. * The process is then automatically restarted as for a buggy process and can start running again. * Live update is currently prototyped as a controlled failure.
2009-12-21 15:12:21 +01:00
/* SEF functions and variables. */
FORWARD _PROTOTYPE( void sef_local_startup, (void) );
Initialization protocol for system services. SYSLIB CHANGES: - SEF framework now supports a new SEF Init request type from RS. 3 different callbacks are available (init_fresh, init_lu, init_restart) to specify initialization code when a service starts fresh, starts after a live update, or restarts. SYSTEM SERVICE CHANGES: - Initialization code for system services is now enclosed in a callback SEF will automatically call at init time. The return code of the callback will tell RS whether the initialization completed successfully. - Each init callback can access information passed by RS to initialize. As of now, each system service has access to the public entries of RS's system process table to gather all the information required to initialize. This design eliminates many existing or potential races at boot time and provides a uniform initialization interface to system services. The same interface will be reused for the upcoming publish/subscribe model to handle dynamic registration / deregistration of system services. VM CHANGES: - Uniform privilege management for all system services. Every service uses the same call mask format. For boot services, VM copies the call mask from init data. For dynamic services, VM still receives the call mask via rs_set_priv call that will be soon replaced by the upcoming publish/subscribe model. RS CHANGES: - The system process table has been reorganized and split into private entries and public entries. Only the latter ones are exposed to system services. - VM call masks are now entirely configured in rs/table.c - RS has now its own slot in the system process table. Only kernel tasks and user processes not included in the boot image are now left out from the system process table. - RS implements the initialization protocol for system services. - For services in the boot image, RS blocks till initialization is complete and panics when failure is reported back. Services are initialized in their order of appearance in the boot image priv table and RS blocks to implements synchronous initialization for every system service having the flag SF_SYNCH_BOOT set. - For services started dynamically, the initialization protocol is implemented as though it were the first ping for the service. In this case, if the system service fails to report back (or reports failure), RS brings the service down rather than trying to restart it.
2010-01-08 02:20:42 +01:00
FORWARD _PROTOTYPE( int sef_cb_init_fresh, (int type, sef_init_info_t *info) );
EXTERN char **env_argv;
Basic System Event Framework (SEF) with ping and live update. SYSLIB CHANGES: - SEF must be used by every system process and is thereby part of the system library. - The framework provides a receive() interface (sef_receive) for system processes to automatically catch known system even messages and process them. - SEF provides a default behavior for each type of system event, but allows system processes to register callbacks to override the default behavior. - Custom (local to the process) or predefined (provided by SEF) callback implementations can be registered to SEF. - SEF currently includes support for 2 types of system events: 1. SEF Ping. The event occurs every time RS sends a ping to figure out whether a system process is still alive. The default callback implementation provided by SEF is to notify RS back to let it know the process is alive and kicking. 2. SEF Live update. The event occurs every time RS sends a prepare to update message to let a system process know an update is available and to prepare for it. The live update support is very basic for now. SEF only deals with verifying if the prepare state can be supported by the process, dumping the state for debugging purposes, and providing an event-driven programming model to the process to react to state changes check-in when ready to update. - SEF should be extended in the future to integrate support for more types of system events. Ideally, all the cross-cutting concerns should be integrated into SEF to avoid duplicating code and ease extensibility. Examples include: * PM notify messages primarily used at shutdown. * SYSTEM notify messages primarily used for signals. * CLOCK notify messages used for system alarms. * Debug messages. IS could still be in charge of fkey handling but would forward the debug message to the target process (e.g. PM, if the user requested debug information about PM). SEF would then catch the message and do nothing unless the process has registered an appropriate callback to deal with the event. This simplifies the programming model to print debug information, avoids duplicating code, and reduces the effort to print debug information. SYSTEM PROCESSES CHANGES: - Every system process registers SEF callbacks it needs to override the default system behavior and calls sef_startup() right after being started. - sef_startup() does almost nothing now, but will be extended in the future to support callbacks of its own to let RS control and synchronize with every system process at initialization time. - Every system process calls sef_receive() now rather than receive() directly, to let SEF handle predefined system events. RS CHANGES: - RS supports a basic single-component live update protocol now, as follows: * When an update command is issued (via "service update *"), RS notifies the target system process to prepare for a specific update state. * If the process doesn't respond back in time, the update is aborted. * When the process responds back, RS kills it and marks it for refreshing. * The process is then automatically restarted as for a buggy process and can start running again. * Live update is currently prototyped as a controlled failure.
2009-12-21 15:12:21 +01:00
/*===========================================================================*
2009-07-22 14:36:19 +02:00
* main *
*===========================================================================*/
void main( int argc, char **argv )
{
2009-07-22 14:36:19 +02:00
message m;
int i,r;
2009-07-22 14:36:19 +02:00
ether_card_t *ec;
Basic System Event Framework (SEF) with ping and live update. SYSLIB CHANGES: - SEF must be used by every system process and is thereby part of the system library. - The framework provides a receive() interface (sef_receive) for system processes to automatically catch known system even messages and process them. - SEF provides a default behavior for each type of system event, but allows system processes to register callbacks to override the default behavior. - Custom (local to the process) or predefined (provided by SEF) callback implementations can be registered to SEF. - SEF currently includes support for 2 types of system events: 1. SEF Ping. The event occurs every time RS sends a ping to figure out whether a system process is still alive. The default callback implementation provided by SEF is to notify RS back to let it know the process is alive and kicking. 2. SEF Live update. The event occurs every time RS sends a prepare to update message to let a system process know an update is available and to prepare for it. The live update support is very basic for now. SEF only deals with verifying if the prepare state can be supported by the process, dumping the state for debugging purposes, and providing an event-driven programming model to the process to react to state changes check-in when ready to update. - SEF should be extended in the future to integrate support for more types of system events. Ideally, all the cross-cutting concerns should be integrated into SEF to avoid duplicating code and ease extensibility. Examples include: * PM notify messages primarily used at shutdown. * SYSTEM notify messages primarily used for signals. * CLOCK notify messages used for system alarms. * Debug messages. IS could still be in charge of fkey handling but would forward the debug message to the target process (e.g. PM, if the user requested debug information about PM). SEF would then catch the message and do nothing unless the process has registered an appropriate callback to deal with the event. This simplifies the programming model to print debug information, avoids duplicating code, and reduces the effort to print debug information. SYSTEM PROCESSES CHANGES: - Every system process registers SEF callbacks it needs to override the default system behavior and calls sef_startup() right after being started. - sef_startup() does almost nothing now, but will be extended in the future to support callbacks of its own to let RS control and synchronize with every system process at initialization time. - Every system process calls sef_receive() now rather than receive() directly, to let SEF handle predefined system events. RS CHANGES: - RS supports a basic single-component live update protocol now, as follows: * When an update command is issued (via "service update *"), RS notifies the target system process to prepare for a specific update state. * If the process doesn't respond back in time, the update is aborted. * When the process responds back, RS kills it and marks it for refreshing. * The process is then automatically restarted as for a buggy process and can start running again. * Live update is currently prototyped as a controlled failure.
2009-12-21 15:12:21 +01:00
/* SEF local startup. */
Initialization protocol for system services. SYSLIB CHANGES: - SEF framework now supports a new SEF Init request type from RS. 3 different callbacks are available (init_fresh, init_lu, init_restart) to specify initialization code when a service starts fresh, starts after a live update, or restarts. SYSTEM SERVICE CHANGES: - Initialization code for system services is now enclosed in a callback SEF will automatically call at init time. The return code of the callback will tell RS whether the initialization completed successfully. - Each init callback can access information passed by RS to initialize. As of now, each system service has access to the public entries of RS's system process table to gather all the information required to initialize. This design eliminates many existing or potential races at boot time and provides a uniform initialization interface to system services. The same interface will be reused for the upcoming publish/subscribe model to handle dynamic registration / deregistration of system services. VM CHANGES: - Uniform privilege management for all system services. Every service uses the same call mask format. For boot services, VM copies the call mask from init data. For dynamic services, VM still receives the call mask via rs_set_priv call that will be soon replaced by the upcoming publish/subscribe model. RS CHANGES: - The system process table has been reorganized and split into private entries and public entries. Only the latter ones are exposed to system services. - VM call masks are now entirely configured in rs/table.c - RS has now its own slot in the system process table. Only kernel tasks and user processes not included in the boot image are now left out from the system process table. - RS implements the initialization protocol for system services. - For services in the boot image, RS blocks till initialization is complete and panics when failure is reported back. Services are initialized in their order of appearance in the boot image priv table and RS blocks to implements synchronous initialization for every system service having the flag SF_SYNCH_BOOT set. - For services started dynamically, the initialization protocol is implemented as though it were the first ping for the service. In this case, if the system service fails to report back (or reports failure), RS brings the service down rather than trying to restart it.
2010-01-08 02:20:42 +01:00
env_setargs(argc, argv);
Basic System Event Framework (SEF) with ping and live update. SYSLIB CHANGES: - SEF must be used by every system process and is thereby part of the system library. - The framework provides a receive() interface (sef_receive) for system processes to automatically catch known system even messages and process them. - SEF provides a default behavior for each type of system event, but allows system processes to register callbacks to override the default behavior. - Custom (local to the process) or predefined (provided by SEF) callback implementations can be registered to SEF. - SEF currently includes support for 2 types of system events: 1. SEF Ping. The event occurs every time RS sends a ping to figure out whether a system process is still alive. The default callback implementation provided by SEF is to notify RS back to let it know the process is alive and kicking. 2. SEF Live update. The event occurs every time RS sends a prepare to update message to let a system process know an update is available and to prepare for it. The live update support is very basic for now. SEF only deals with verifying if the prepare state can be supported by the process, dumping the state for debugging purposes, and providing an event-driven programming model to the process to react to state changes check-in when ready to update. - SEF should be extended in the future to integrate support for more types of system events. Ideally, all the cross-cutting concerns should be integrated into SEF to avoid duplicating code and ease extensibility. Examples include: * PM notify messages primarily used at shutdown. * SYSTEM notify messages primarily used for signals. * CLOCK notify messages used for system alarms. * Debug messages. IS could still be in charge of fkey handling but would forward the debug message to the target process (e.g. PM, if the user requested debug information about PM). SEF would then catch the message and do nothing unless the process has registered an appropriate callback to deal with the event. This simplifies the programming model to print debug information, avoids duplicating code, and reduces the effort to print debug information. SYSTEM PROCESSES CHANGES: - Every system process registers SEF callbacks it needs to override the default system behavior and calls sef_startup() right after being started. - sef_startup() does almost nothing now, but will be extended in the future to support callbacks of its own to let RS control and synchronize with every system process at initialization time. - Every system process calls sef_receive() now rather than receive() directly, to let SEF handle predefined system events. RS CHANGES: - RS supports a basic single-component live update protocol now, as follows: * When an update command is issued (via "service update *"), RS notifies the target system process to prepare for a specific update state. * If the process doesn't respond back in time, the update is aborted. * When the process responds back, RS kills it and marks it for refreshing. * The process is then automatically restarted as for a buggy process and can start running again. * Live update is currently prototyped as a controlled failure.
2009-12-21 15:12:21 +01:00
sef_local_startup();
2009-07-22 14:36:19 +02:00
while (TRUE)
{
for (i=0;i<EC_PORT_NR_MAX;++i)
2009-07-22 14:36:19 +02:00
{
ec= &ec_table[i];
if (ec->ec_irq != 0)
sys_irqenable(&ec->ec_hook);
}
Basic System Event Framework (SEF) with ping and live update. SYSLIB CHANGES: - SEF must be used by every system process and is thereby part of the system library. - The framework provides a receive() interface (sef_receive) for system processes to automatically catch known system even messages and process them. - SEF provides a default behavior for each type of system event, but allows system processes to register callbacks to override the default behavior. - Custom (local to the process) or predefined (provided by SEF) callback implementations can be registered to SEF. - SEF currently includes support for 2 types of system events: 1. SEF Ping. The event occurs every time RS sends a ping to figure out whether a system process is still alive. The default callback implementation provided by SEF is to notify RS back to let it know the process is alive and kicking. 2. SEF Live update. The event occurs every time RS sends a prepare to update message to let a system process know an update is available and to prepare for it. The live update support is very basic for now. SEF only deals with verifying if the prepare state can be supported by the process, dumping the state for debugging purposes, and providing an event-driven programming model to the process to react to state changes check-in when ready to update. - SEF should be extended in the future to integrate support for more types of system events. Ideally, all the cross-cutting concerns should be integrated into SEF to avoid duplicating code and ease extensibility. Examples include: * PM notify messages primarily used at shutdown. * SYSTEM notify messages primarily used for signals. * CLOCK notify messages used for system alarms. * Debug messages. IS could still be in charge of fkey handling but would forward the debug message to the target process (e.g. PM, if the user requested debug information about PM). SEF would then catch the message and do nothing unless the process has registered an appropriate callback to deal with the event. This simplifies the programming model to print debug information, avoids duplicating code, and reduces the effort to print debug information. SYSTEM PROCESSES CHANGES: - Every system process registers SEF callbacks it needs to override the default system behavior and calls sef_startup() right after being started. - sef_startup() does almost nothing now, but will be extended in the future to support callbacks of its own to let RS control and synchronize with every system process at initialization time. - Every system process calls sef_receive() now rather than receive() directly, to let SEF handle predefined system events. RS CHANGES: - RS supports a basic single-component live update protocol now, as follows: * When an update command is issued (via "service update *"), RS notifies the target system process to prepare for a specific update state. * If the process doesn't respond back in time, the update is aborted. * When the process responds back, RS kills it and marks it for refreshing. * The process is then automatically restarted as for a buggy process and can start running again. * Live update is currently prototyped as a controlled failure.
2009-12-21 15:12:21 +01:00
if ((r= sef_receive(ANY, &m)) != OK)
panic( "lance", "sef_receive failed", r);
for (i=0;i<EC_PORT_NR_MAX;++i)
2009-07-22 14:36:19 +02:00
{
ec= &ec_table[i];
if (ec->ec_irq != 0)
sys_irqdisable(&ec->ec_hook);
}
if (is_notify(m.m_type)) {
switch(_ENDPOINT_P(m.m_source)) {
case TTY_PROC_NR:
lance_dump();
break;
case HARDWARE:
for (i=0;i<EC_PORT_NR_MAX;++i)
{
ec= &ec_table[i];
if (ec->mode != EC_ENABLED)
continue;
{
ec->ec_int_pending = 0;
ec_check_ints(ec);
do_int(ec);
}
}
break;
case PM_PROC_NR:
Merge of David's ptrace branch. Summary: o Support for ptrace T_ATTACH/T_DETACH and T_SYSCALL o PM signal handling logic should now work properly, even with debuggers being present o Asynchronous PM/VFS protocol, full IPC support for senda(), and AMF_NOREPLY senda() flag DETAILS Process stop and delay call handling of PM: o Added sys_runctl() kernel call with sys_stop() and sys_resume() aliases, for PM to stop and resume a process o Added exception for sending/syscall-traced processes to sys_runctl(), and matching SIGKREADY pseudo-signal to PM o Fixed PM signal logic to deal with requests from a process after stopping it (so-called "delay calls"), using the SIGKREADY facility o Fixed various PM panics due to race conditions with delay calls versus VFS calls o Removed special PRIO_STOP priority value o Added SYS_LOCK RTS kernel flag, to stop an individual process from running while modifying its process structure Signal and debugger handling in PM: o Fixed debugger signals being dropped if a second signal arrives when the debugger has not retrieved the first one o Fixed debugger signals being sent to the debugger more than once o Fixed debugger signals unpausing process in VFS; removed PM_UNPAUSE_TR protocol message o Detached debugger signals from general signal logic and from being blocked on VFS calls, meaning that even VFS can now be traced o Fixed debugger being unable to receive more than one pending signal in one process stop o Fixed signal delivery being delayed needlessly when multiple signals are pending o Fixed wait test for tracer, which was returning for children that were not waited for o Removed second parallel pending call from PM to VFS for any process o Fixed process becoming runnable between exec() and debugger trap o Added support for notifying the debugger before the parent when a debugged child exits o Fixed debugger death causing child to remain stopped forever o Fixed consistently incorrect use of _NSIG Extensions to ptrace(): o Added T_ATTACH and T_DETACH ptrace request, to attach and detach a debugger to and from a process o Added T_SYSCALL ptrace request, to trace system calls o Added T_SETOPT ptrace request, to set trace options o Added TO_TRACEFORK trace option, to attach automatically to children of a traced process o Added TO_ALTEXEC trace option, to send SIGSTOP instead of SIGTRAP upon a successful exec() of the tracee o Extended T_GETUSER ptrace support to allow retrieving a process's priv structure o Removed T_STOP ptrace request again, as it does not help implementing debuggers properly o Added MINIX3-specific ptrace test (test42) o Added proper manual page for ptrace(2) Asynchronous PM/VFS interface: o Fixed asynchronous messages not being checked when receive() is called with an endpoint other than ANY o Added AMF_NOREPLY senda() flag, preventing such messages from satisfying the receive part of a sendrec() o Added asynsend3() that takes optional flags; asynsend() is now a #define passing in 0 as third parameter o Made PM/VFS protocol asynchronous; reintroduced tell_fs() o Made PM_BASE request/reply number range unique o Hacked in a horrible temporary workaround into RS to deal with newly revealed RS-PM-VFS race condition triangle until VFS is asynchronous System signal handling: o Fixed shutdown logic of device drivers; removed old SIGKSTOP signal o Removed is-superuser check from PM's do_procstat() (aka getsigset()) o Added sigset macros to allow system processes to deal with the full signal set, rather than just the POSIX subset Miscellaneous PM fixes: o Split do_getset into do_get and do_set, merging common code and making structure clearer o Fixed setpriority() being able to put to sleep processes using an invalid parameter, or revive zombie processes o Made find_proc() global; removed obsolete proc_from_pid() o Cleanup here and there Also included: o Fixed false-positive boot order kernel warning o Removed last traces of old NOTIFY_FROM code THINGS OF POSSIBLE INTEREST o It should now be possible to run PM at any priority, even lower than user processes o No assumptions are made about communication speed between PM and VFS, although communication must be FIFO o A debugger will now receive incoming debuggee signals at kill time only; the process may not yet be fully stopped o A first step has been made towards making the SYSTEM task preemptible
2009-09-30 11:57:22 +02:00
{
sigset_t set;
if (getsigset(&set) != 0) break;
if (sigismember(&set, SIGTERM))
lance_stop();
break;
Merge of David's ptrace branch. Summary: o Support for ptrace T_ATTACH/T_DETACH and T_SYSCALL o PM signal handling logic should now work properly, even with debuggers being present o Asynchronous PM/VFS protocol, full IPC support for senda(), and AMF_NOREPLY senda() flag DETAILS Process stop and delay call handling of PM: o Added sys_runctl() kernel call with sys_stop() and sys_resume() aliases, for PM to stop and resume a process o Added exception for sending/syscall-traced processes to sys_runctl(), and matching SIGKREADY pseudo-signal to PM o Fixed PM signal logic to deal with requests from a process after stopping it (so-called "delay calls"), using the SIGKREADY facility o Fixed various PM panics due to race conditions with delay calls versus VFS calls o Removed special PRIO_STOP priority value o Added SYS_LOCK RTS kernel flag, to stop an individual process from running while modifying its process structure Signal and debugger handling in PM: o Fixed debugger signals being dropped if a second signal arrives when the debugger has not retrieved the first one o Fixed debugger signals being sent to the debugger more than once o Fixed debugger signals unpausing process in VFS; removed PM_UNPAUSE_TR protocol message o Detached debugger signals from general signal logic and from being blocked on VFS calls, meaning that even VFS can now be traced o Fixed debugger being unable to receive more than one pending signal in one process stop o Fixed signal delivery being delayed needlessly when multiple signals are pending o Fixed wait test for tracer, which was returning for children that were not waited for o Removed second parallel pending call from PM to VFS for any process o Fixed process becoming runnable between exec() and debugger trap o Added support for notifying the debugger before the parent when a debugged child exits o Fixed debugger death causing child to remain stopped forever o Fixed consistently incorrect use of _NSIG Extensions to ptrace(): o Added T_ATTACH and T_DETACH ptrace request, to attach and detach a debugger to and from a process o Added T_SYSCALL ptrace request, to trace system calls o Added T_SETOPT ptrace request, to set trace options o Added TO_TRACEFORK trace option, to attach automatically to children of a traced process o Added TO_ALTEXEC trace option, to send SIGSTOP instead of SIGTRAP upon a successful exec() of the tracee o Extended T_GETUSER ptrace support to allow retrieving a process's priv structure o Removed T_STOP ptrace request again, as it does not help implementing debuggers properly o Added MINIX3-specific ptrace test (test42) o Added proper manual page for ptrace(2) Asynchronous PM/VFS interface: o Fixed asynchronous messages not being checked when receive() is called with an endpoint other than ANY o Added AMF_NOREPLY senda() flag, preventing such messages from satisfying the receive part of a sendrec() o Added asynsend3() that takes optional flags; asynsend() is now a #define passing in 0 as third parameter o Made PM/VFS protocol asynchronous; reintroduced tell_fs() o Made PM_BASE request/reply number range unique o Hacked in a horrible temporary workaround into RS to deal with newly revealed RS-PM-VFS race condition triangle until VFS is asynchronous System signal handling: o Fixed shutdown logic of device drivers; removed old SIGKSTOP signal o Removed is-superuser check from PM's do_procstat() (aka getsigset()) o Added sigset macros to allow system processes to deal with the full signal set, rather than just the POSIX subset Miscellaneous PM fixes: o Split do_getset into do_get and do_set, merging common code and making structure clearer o Fixed setpriority() being able to put to sleep processes using an invalid parameter, or revive zombie processes o Made find_proc() global; removed obsolete proc_from_pid() o Cleanup here and there Also included: o Fixed false-positive boot order kernel warning o Removed last traces of old NOTIFY_FROM code THINGS OF POSSIBLE INTEREST o It should now be possible to run PM at any priority, even lower than user processes o No assumptions are made about communication speed between PM and VFS, although communication must be FIFO o A debugger will now receive incoming debuggee signals at kill time only; the process may not yet be fully stopped o A first step has been made towards making the SYSTEM task preemptible
2009-09-30 11:57:22 +02:00
}
default:
panic( "lance", "illegal notify source", m.m_source);
}
/* get next message */
continue;
}
2009-07-22 14:36:19 +02:00
switch (m.m_type)
{
case DL_WRITEV_S:
do_vwrite_s(&m, FALSE);
break;
case DL_READV_S:
do_vread_s(&m);
break;
case DL_CONF:
do_init(&m);
break;
case DL_GETSTAT_S:
do_getstat_s(&m);
break;
case DL_STOP:
do_stop(&m);
break;
case DL_GETNAME:
do_getname(&m);
break;
default:
2009-07-22 14:36:19 +02:00
panic( "lance", "illegal message", m.m_type);
}
2009-07-22 14:36:19 +02:00
}
}
Basic System Event Framework (SEF) with ping and live update. SYSLIB CHANGES: - SEF must be used by every system process and is thereby part of the system library. - The framework provides a receive() interface (sef_receive) for system processes to automatically catch known system even messages and process them. - SEF provides a default behavior for each type of system event, but allows system processes to register callbacks to override the default behavior. - Custom (local to the process) or predefined (provided by SEF) callback implementations can be registered to SEF. - SEF currently includes support for 2 types of system events: 1. SEF Ping. The event occurs every time RS sends a ping to figure out whether a system process is still alive. The default callback implementation provided by SEF is to notify RS back to let it know the process is alive and kicking. 2. SEF Live update. The event occurs every time RS sends a prepare to update message to let a system process know an update is available and to prepare for it. The live update support is very basic for now. SEF only deals with verifying if the prepare state can be supported by the process, dumping the state for debugging purposes, and providing an event-driven programming model to the process to react to state changes check-in when ready to update. - SEF should be extended in the future to integrate support for more types of system events. Ideally, all the cross-cutting concerns should be integrated into SEF to avoid duplicating code and ease extensibility. Examples include: * PM notify messages primarily used at shutdown. * SYSTEM notify messages primarily used for signals. * CLOCK notify messages used for system alarms. * Debug messages. IS could still be in charge of fkey handling but would forward the debug message to the target process (e.g. PM, if the user requested debug information about PM). SEF would then catch the message and do nothing unless the process has registered an appropriate callback to deal with the event. This simplifies the programming model to print debug information, avoids duplicating code, and reduces the effort to print debug information. SYSTEM PROCESSES CHANGES: - Every system process registers SEF callbacks it needs to override the default system behavior and calls sef_startup() right after being started. - sef_startup() does almost nothing now, but will be extended in the future to support callbacks of its own to let RS control and synchronize with every system process at initialization time. - Every system process calls sef_receive() now rather than receive() directly, to let SEF handle predefined system events. RS CHANGES: - RS supports a basic single-component live update protocol now, as follows: * When an update command is issued (via "service update *"), RS notifies the target system process to prepare for a specific update state. * If the process doesn't respond back in time, the update is aborted. * When the process responds back, RS kills it and marks it for refreshing. * The process is then automatically restarted as for a buggy process and can start running again. * Live update is currently prototyped as a controlled failure.
2009-12-21 15:12:21 +01:00
/*===========================================================================*
* sef_local_startup *
*===========================================================================*/
PRIVATE void sef_local_startup()
{
Initialization protocol for system services. SYSLIB CHANGES: - SEF framework now supports a new SEF Init request type from RS. 3 different callbacks are available (init_fresh, init_lu, init_restart) to specify initialization code when a service starts fresh, starts after a live update, or restarts. SYSTEM SERVICE CHANGES: - Initialization code for system services is now enclosed in a callback SEF will automatically call at init time. The return code of the callback will tell RS whether the initialization completed successfully. - Each init callback can access information passed by RS to initialize. As of now, each system service has access to the public entries of RS's system process table to gather all the information required to initialize. This design eliminates many existing or potential races at boot time and provides a uniform initialization interface to system services. The same interface will be reused for the upcoming publish/subscribe model to handle dynamic registration / deregistration of system services. VM CHANGES: - Uniform privilege management for all system services. Every service uses the same call mask format. For boot services, VM copies the call mask from init data. For dynamic services, VM still receives the call mask via rs_set_priv call that will be soon replaced by the upcoming publish/subscribe model. RS CHANGES: - The system process table has been reorganized and split into private entries and public entries. Only the latter ones are exposed to system services. - VM call masks are now entirely configured in rs/table.c - RS has now its own slot in the system process table. Only kernel tasks and user processes not included in the boot image are now left out from the system process table. - RS implements the initialization protocol for system services. - For services in the boot image, RS blocks till initialization is complete and panics when failure is reported back. Services are initialized in their order of appearance in the boot image priv table and RS blocks to implements synchronous initialization for every system service having the flag SF_SYNCH_BOOT set. - For services started dynamically, the initialization protocol is implemented as though it were the first ping for the service. In this case, if the system service fails to report back (or reports failure), RS brings the service down rather than trying to restart it.
2010-01-08 02:20:42 +01:00
/* Register init callbacks. */
sef_setcb_init_fresh(sef_cb_init_fresh);
sef_setcb_init_restart(sef_cb_init_fresh);
Basic System Event Framework (SEF) with ping and live update. SYSLIB CHANGES: - SEF must be used by every system process and is thereby part of the system library. - The framework provides a receive() interface (sef_receive) for system processes to automatically catch known system even messages and process them. - SEF provides a default behavior for each type of system event, but allows system processes to register callbacks to override the default behavior. - Custom (local to the process) or predefined (provided by SEF) callback implementations can be registered to SEF. - SEF currently includes support for 2 types of system events: 1. SEF Ping. The event occurs every time RS sends a ping to figure out whether a system process is still alive. The default callback implementation provided by SEF is to notify RS back to let it know the process is alive and kicking. 2. SEF Live update. The event occurs every time RS sends a prepare to update message to let a system process know an update is available and to prepare for it. The live update support is very basic for now. SEF only deals with verifying if the prepare state can be supported by the process, dumping the state for debugging purposes, and providing an event-driven programming model to the process to react to state changes check-in when ready to update. - SEF should be extended in the future to integrate support for more types of system events. Ideally, all the cross-cutting concerns should be integrated into SEF to avoid duplicating code and ease extensibility. Examples include: * PM notify messages primarily used at shutdown. * SYSTEM notify messages primarily used for signals. * CLOCK notify messages used for system alarms. * Debug messages. IS could still be in charge of fkey handling but would forward the debug message to the target process (e.g. PM, if the user requested debug information about PM). SEF would then catch the message and do nothing unless the process has registered an appropriate callback to deal with the event. This simplifies the programming model to print debug information, avoids duplicating code, and reduces the effort to print debug information. SYSTEM PROCESSES CHANGES: - Every system process registers SEF callbacks it needs to override the default system behavior and calls sef_startup() right after being started. - sef_startup() does almost nothing now, but will be extended in the future to support callbacks of its own to let RS control and synchronize with every system process at initialization time. - Every system process calls sef_receive() now rather than receive() directly, to let SEF handle predefined system events. RS CHANGES: - RS supports a basic single-component live update protocol now, as follows: * When an update command is issued (via "service update *"), RS notifies the target system process to prepare for a specific update state. * If the process doesn't respond back in time, the update is aborted. * When the process responds back, RS kills it and marks it for refreshing. * The process is then automatically restarted as for a buggy process and can start running again. * Live update is currently prototyped as a controlled failure.
2009-12-21 15:12:21 +01:00
/* No live update support for now. */
/* Let SEF perform startup. */
sef_startup();
}
Initialization protocol for system services. SYSLIB CHANGES: - SEF framework now supports a new SEF Init request type from RS. 3 different callbacks are available (init_fresh, init_lu, init_restart) to specify initialization code when a service starts fresh, starts after a live update, or restarts. SYSTEM SERVICE CHANGES: - Initialization code for system services is now enclosed in a callback SEF will automatically call at init time. The return code of the callback will tell RS whether the initialization completed successfully. - Each init callback can access information passed by RS to initialize. As of now, each system service has access to the public entries of RS's system process table to gather all the information required to initialize. This design eliminates many existing or potential races at boot time and provides a uniform initialization interface to system services. The same interface will be reused for the upcoming publish/subscribe model to handle dynamic registration / deregistration of system services. VM CHANGES: - Uniform privilege management for all system services. Every service uses the same call mask format. For boot services, VM copies the call mask from init data. For dynamic services, VM still receives the call mask via rs_set_priv call that will be soon replaced by the upcoming publish/subscribe model. RS CHANGES: - The system process table has been reorganized and split into private entries and public entries. Only the latter ones are exposed to system services. - VM call masks are now entirely configured in rs/table.c - RS has now its own slot in the system process table. Only kernel tasks and user processes not included in the boot image are now left out from the system process table. - RS implements the initialization protocol for system services. - For services in the boot image, RS blocks till initialization is complete and panics when failure is reported back. Services are initialized in their order of appearance in the boot image priv table and RS blocks to implements synchronous initialization for every system service having the flag SF_SYNCH_BOOT set. - For services started dynamically, the initialization protocol is implemented as though it were the first ping for the service. In this case, if the system service fails to report back (or reports failure), RS brings the service down rather than trying to restart it.
2010-01-08 02:20:42 +01:00
/*===========================================================================*
* sef_cb_init_fresh *
*===========================================================================*/
PRIVATE int sef_cb_init_fresh(int type, sef_init_info_t *info)
{
/* Initialize the lance driver. */
int r;
u32_t tasknr;
long v;
#if LANCE_FKEY
int fkeys, sfkeys;
#endif
(progname=strrchr(env_argv[0],'/')) ? progname++ : (progname=env_argv[0]);
#if LANCE_FKEY
fkeys = sfkeys = 0;
bit_set( sfkeys, 7 );
if ( (r = fkey_map(&fkeys, &sfkeys)) != OK )
printf("Warning: lance couldn't observe Shift+F7 key: %d\n",r);
#endif
v= 0;
(void) env_parse("ETH_IGN_PROTO", "x", 0, &v, 0x0000L, 0xFFFFL);
eth_ign_proto= htons((u16_t) v);
/* Try to notify inet that we are present (again) */
2010-01-26 00:23:43 +01:00
r= ds_retrieve_label_num("inet", &tasknr);
Initialization protocol for system services. SYSLIB CHANGES: - SEF framework now supports a new SEF Init request type from RS. 3 different callbacks are available (init_fresh, init_lu, init_restart) to specify initialization code when a service starts fresh, starts after a live update, or restarts. SYSTEM SERVICE CHANGES: - Initialization code for system services is now enclosed in a callback SEF will automatically call at init time. The return code of the callback will tell RS whether the initialization completed successfully. - Each init callback can access information passed by RS to initialize. As of now, each system service has access to the public entries of RS's system process table to gather all the information required to initialize. This design eliminates many existing or potential races at boot time and provides a uniform initialization interface to system services. The same interface will be reused for the upcoming publish/subscribe model to handle dynamic registration / deregistration of system services. VM CHANGES: - Uniform privilege management for all system services. Every service uses the same call mask format. For boot services, VM copies the call mask from init data. For dynamic services, VM still receives the call mask via rs_set_priv call that will be soon replaced by the upcoming publish/subscribe model. RS CHANGES: - The system process table has been reorganized and split into private entries and public entries. Only the latter ones are exposed to system services. - VM call masks are now entirely configured in rs/table.c - RS has now its own slot in the system process table. Only kernel tasks and user processes not included in the boot image are now left out from the system process table. - RS implements the initialization protocol for system services. - For services in the boot image, RS blocks till initialization is complete and panics when failure is reported back. Services are initialized in their order of appearance in the boot image priv table and RS blocks to implements synchronous initialization for every system service having the flag SF_SYNCH_BOOT set. - For services started dynamically, the initialization protocol is implemented as though it were the first ping for the service. In this case, if the system service fails to report back (or reports failure), RS brings the service down rather than trying to restart it.
2010-01-08 02:20:42 +01:00
if (r == OK)
notify(tasknr);
else if (r != ESRCH)
2010-01-26 00:23:43 +01:00
printf("lance: ds_retrieve_label_num failed for 'inet': %d\n", r);
Initialization protocol for system services. SYSLIB CHANGES: - SEF framework now supports a new SEF Init request type from RS. 3 different callbacks are available (init_fresh, init_lu, init_restart) to specify initialization code when a service starts fresh, starts after a live update, or restarts. SYSTEM SERVICE CHANGES: - Initialization code for system services is now enclosed in a callback SEF will automatically call at init time. The return code of the callback will tell RS whether the initialization completed successfully. - Each init callback can access information passed by RS to initialize. As of now, each system service has access to the public entries of RS's system process table to gather all the information required to initialize. This design eliminates many existing or potential races at boot time and provides a uniform initialization interface to system services. The same interface will be reused for the upcoming publish/subscribe model to handle dynamic registration / deregistration of system services. VM CHANGES: - Uniform privilege management for all system services. Every service uses the same call mask format. For boot services, VM copies the call mask from init data. For dynamic services, VM still receives the call mask via rs_set_priv call that will be soon replaced by the upcoming publish/subscribe model. RS CHANGES: - The system process table has been reorganized and split into private entries and public entries. Only the latter ones are exposed to system services. - VM call masks are now entirely configured in rs/table.c - RS has now its own slot in the system process table. Only kernel tasks and user processes not included in the boot image are now left out from the system process table. - RS implements the initialization protocol for system services. - For services in the boot image, RS blocks till initialization is complete and panics when failure is reported back. Services are initialized in their order of appearance in the boot image priv table and RS blocks to implements synchronous initialization for every system service having the flag SF_SYNCH_BOOT set. - For services started dynamically, the initialization protocol is implemented as though it were the first ping for the service. In this case, if the system service fails to report back (or reports failure), RS brings the service down rather than trying to restart it.
2010-01-08 02:20:42 +01:00
return(OK);
}
/*===========================================================================*
2009-07-22 14:36:19 +02:00
* lance_dump *
*===========================================================================*/
static void lance_dump()
{
2009-07-22 14:36:19 +02:00
ether_card_t *ec;
int i, isr, csr;
unsigned short ioaddr;
2009-07-22 14:36:19 +02:00
printf("\n");
for (i= 0, ec = &ec_table[0]; i<EC_PORT_NR_MAX; i++, ec++)
{
if (ec->mode == EC_DISABLED)
2009-07-22 14:36:19 +02:00
printf("lance port %d is disabled\n", i);
else if (ec->mode == EC_SINK)
2009-07-22 14:36:19 +02:00
printf("lance port %d is in sink mode\n", i);
if (ec->mode != EC_ENABLED)
2009-07-22 14:36:19 +02:00
continue;
printf("lance statistics of port %d:\n", i);
printf("recvErr :%8ld\t", ec->eth_stat.ets_recvErr);
printf("sendErr :%8ld\t", ec->eth_stat.ets_sendErr);
printf("OVW :%8ld\n", ec->eth_stat.ets_OVW);
printf("CRCerr :%8ld\t", ec->eth_stat.ets_CRCerr);
printf("frameAll :%8ld\t", ec->eth_stat.ets_frameAll);
printf("missedP :%8ld\n", ec->eth_stat.ets_missedP);
printf("packetR :%8ld\t", ec->eth_stat.ets_packetR);
printf("packetT :%8ld\t", ec->eth_stat.ets_packetT);
printf("transDef :%8ld\n", ec->eth_stat.ets_transDef);
printf("collision :%8ld\t", ec->eth_stat.ets_collision);
printf("transAb :%8ld\t", ec->eth_stat.ets_transAb);
printf("carrSense :%8ld\n", ec->eth_stat.ets_carrSense);
printf("fifoUnder :%8ld\t", ec->eth_stat.ets_fifoUnder);
printf("fifoOver :%8ld\t", ec->eth_stat.ets_fifoOver);
printf("CDheartbeat:%8ld\n", ec->eth_stat.ets_CDheartbeat);
printf("OWC :%8ld\t", ec->eth_stat.ets_OWC);
ioaddr = ec->ec_port;
2009-07-22 14:36:19 +02:00
isr = read_csr(ioaddr, LANCE_CSR0);
printf("isr = 0x%x, flags = 0x%x\n", isr,
ec->flags);
printf("irq = %d\tioadr = 0x%x\n", ec->ec_irq, ec->ec_port);
csr = read_csr(ioaddr, LANCE_CSR0);
printf("CSR0: 0x%x\n", csr);
csr = read_csr(ioaddr, LANCE_CSR3);
printf("CSR3: 0x%x\n", csr);
csr = read_csr(ioaddr, LANCE_CSR4);
printf("CSR4: 0x%x\n", csr);
csr = read_csr(ioaddr, LANCE_CSR5);
printf("CSR5: 0x%x\n", csr);
csr = read_csr(ioaddr, LANCE_CSR15);
printf("CSR15: 0x%x\n", csr);
2009-07-22 14:36:19 +02:00
}
}
/*===========================================================================*
2009-07-22 14:36:19 +02:00
* lance_stop *
*===========================================================================*/
static void lance_stop()
{
2009-07-22 14:36:19 +02:00
message mess;
int i;
2009-07-22 14:36:19 +02:00
for (i= 0; i<EC_PORT_NR_MAX; i++)
{
if (ec_table[i].mode != EC_ENABLED)
2009-07-22 14:36:19 +02:00
continue;
mess.m_type= DL_STOP;
mess.DL_PORT= i;
do_stop(&mess);
2009-07-22 14:36:19 +02:00
}
#if VERBOSE
printf("LANCE driver stopped.\n");
#endif
Merge of David's ptrace branch. Summary: o Support for ptrace T_ATTACH/T_DETACH and T_SYSCALL o PM signal handling logic should now work properly, even with debuggers being present o Asynchronous PM/VFS protocol, full IPC support for senda(), and AMF_NOREPLY senda() flag DETAILS Process stop and delay call handling of PM: o Added sys_runctl() kernel call with sys_stop() and sys_resume() aliases, for PM to stop and resume a process o Added exception for sending/syscall-traced processes to sys_runctl(), and matching SIGKREADY pseudo-signal to PM o Fixed PM signal logic to deal with requests from a process after stopping it (so-called "delay calls"), using the SIGKREADY facility o Fixed various PM panics due to race conditions with delay calls versus VFS calls o Removed special PRIO_STOP priority value o Added SYS_LOCK RTS kernel flag, to stop an individual process from running while modifying its process structure Signal and debugger handling in PM: o Fixed debugger signals being dropped if a second signal arrives when the debugger has not retrieved the first one o Fixed debugger signals being sent to the debugger more than once o Fixed debugger signals unpausing process in VFS; removed PM_UNPAUSE_TR protocol message o Detached debugger signals from general signal logic and from being blocked on VFS calls, meaning that even VFS can now be traced o Fixed debugger being unable to receive more than one pending signal in one process stop o Fixed signal delivery being delayed needlessly when multiple signals are pending o Fixed wait test for tracer, which was returning for children that were not waited for o Removed second parallel pending call from PM to VFS for any process o Fixed process becoming runnable between exec() and debugger trap o Added support for notifying the debugger before the parent when a debugged child exits o Fixed debugger death causing child to remain stopped forever o Fixed consistently incorrect use of _NSIG Extensions to ptrace(): o Added T_ATTACH and T_DETACH ptrace request, to attach and detach a debugger to and from a process o Added T_SYSCALL ptrace request, to trace system calls o Added T_SETOPT ptrace request, to set trace options o Added TO_TRACEFORK trace option, to attach automatically to children of a traced process o Added TO_ALTEXEC trace option, to send SIGSTOP instead of SIGTRAP upon a successful exec() of the tracee o Extended T_GETUSER ptrace support to allow retrieving a process's priv structure o Removed T_STOP ptrace request again, as it does not help implementing debuggers properly o Added MINIX3-specific ptrace test (test42) o Added proper manual page for ptrace(2) Asynchronous PM/VFS interface: o Fixed asynchronous messages not being checked when receive() is called with an endpoint other than ANY o Added AMF_NOREPLY senda() flag, preventing such messages from satisfying the receive part of a sendrec() o Added asynsend3() that takes optional flags; asynsend() is now a #define passing in 0 as third parameter o Made PM/VFS protocol asynchronous; reintroduced tell_fs() o Made PM_BASE request/reply number range unique o Hacked in a horrible temporary workaround into RS to deal with newly revealed RS-PM-VFS race condition triangle until VFS is asynchronous System signal handling: o Fixed shutdown logic of device drivers; removed old SIGKSTOP signal o Removed is-superuser check from PM's do_procstat() (aka getsigset()) o Added sigset macros to allow system processes to deal with the full signal set, rather than just the POSIX subset Miscellaneous PM fixes: o Split do_getset into do_get and do_set, merging common code and making structure clearer o Fixed setpriority() being able to put to sleep processes using an invalid parameter, or revive zombie processes o Made find_proc() global; removed obsolete proc_from_pid() o Cleanup here and there Also included: o Fixed false-positive boot order kernel warning o Removed last traces of old NOTIFY_FROM code THINGS OF POSSIBLE INTEREST o It should now be possible to run PM at any priority, even lower than user processes o No assumptions are made about communication speed between PM and VFS, although communication must be FIFO o A debugger will now receive incoming debuggee signals at kill time only; the process may not yet be fully stopped o A first step has been made towards making the SYSTEM task preemptible
2009-09-30 11:57:22 +02:00
exit( 0 );
}
/*===========================================================================*
* do_init *
*===========================================================================*/
static void do_init(mp)
message *mp;
{
2009-07-22 14:36:19 +02:00
int port;
ether_card_t *ec;
message reply_mess;
2009-07-22 14:36:19 +02:00
pci_init();
2009-07-22 14:36:19 +02:00
if(!lance_buf && !(lance_buf = alloc_contig(LANCE_BUF_SIZE, AC_ALIGN4K|AC_LOWER16M, &lance_buf_phys))) {
panic( "lance", "alloc_contig failed", LANCE_BUF_SIZE);
}
2008-12-17 02:20:15 +01:00
2009-07-22 14:36:19 +02:00
port = mp->DL_PORT;
if (port < 0 || port >= EC_PORT_NR_MAX)
{
2006-07-10 14:43:38 +02:00
reply_mess.m_type= DL_CONF_REPLY;
reply_mess.m3_i1= ENXIO;
mess_reply(mp, &reply_mess);
return;
2009-07-22 14:36:19 +02:00
}
ec= &ec_table[port];
strcpy(ec->port_name, "eth_card#0");
ec->port_name[9] += port;
if (ec->mode == EC_DISABLED)
{
/* This is the default, try to (re)locate the device. */
/* only try to enable if memory is correct for DMA */
2009-07-22 14:36:19 +02:00
if ( CORRECT_DMA_MEM() )
{
conf_hw(ec);
}
else
{
report( "LANCE", "DMA denied because address out of range", NO_NUM );
}
if (ec->mode == EC_DISABLED)
2009-07-22 14:36:19 +02:00
{
/* Probe failed, or the device is configured off. */
reply_mess.m_type= DL_CONF_REPLY;
reply_mess.m3_i1= ENXIO;
mess_reply(mp, &reply_mess);
return;
}
if (ec->mode == EC_ENABLED)
2009-07-22 14:36:19 +02:00
ec_init(ec);
}
2009-07-22 14:36:19 +02:00
if (ec->mode == EC_SINK)
{
ec->mac_address.ea_addr[0] =
2009-07-22 14:36:19 +02:00
ec->mac_address.ea_addr[1] =
ec->mac_address.ea_addr[2] =
ec->mac_address.ea_addr[3] =
ec->mac_address.ea_addr[4] =
ec->mac_address.ea_addr[5] = 0;
ec_confaddr(ec);
2006-07-10 14:43:38 +02:00
reply_mess.m_type = DL_CONF_REPLY;
reply_mess.m3_i1 = mp->DL_PORT;
reply_mess.m3_i2 = EC_PORT_NR_MAX;
*(ether_addr_t *) reply_mess.m3_ca1 = ec->mac_address;
mess_reply(mp, &reply_mess);
return;
2009-07-22 14:36:19 +02:00
}
assert(ec->mode == EC_ENABLED);
assert(ec->flags & ECF_ENABLED);
ec->flags &= ~(ECF_PROMISC | ECF_MULTI | ECF_BROAD);
if (mp->DL_MODE & DL_PROMISC_REQ)
ec->flags |= ECF_PROMISC | ECF_MULTI | ECF_BROAD;
if (mp->DL_MODE & DL_MULTI_REQ)
ec->flags |= ECF_MULTI;
if (mp->DL_MODE & DL_BROAD_REQ)
ec->flags |= ECF_BROAD;
ec->client = mp->m_source;
ec_reinit(ec);
2009-07-22 14:36:19 +02:00
reply_mess.m_type = DL_CONF_REPLY;
reply_mess.m3_i1 = mp->DL_PORT;
reply_mess.m3_i2 = EC_PORT_NR_MAX;
*(ether_addr_t *) reply_mess.m3_ca1 = ec->mac_address;
mess_reply(mp, &reply_mess);
}
/*===========================================================================*
* do_int *
*===========================================================================*/
static void do_int(ec)
ether_card_t *ec;
{
2009-07-22 14:36:19 +02:00
if (ec->flags & (ECF_PACK_SEND | ECF_PACK_RECV))
reply(ec, OK, TRUE);
}
/*===========================================================================*
* conf_hw *
*===========================================================================*/
static void conf_hw(ec)
ether_card_t *ec;
{
2009-07-22 14:36:19 +02:00
static eth_stat_t empty_stat = {0, 0, 0, 0, 0, 0 /* ,... */ };
2009-07-22 14:36:19 +02:00
int ifnr;
ec_conf_t *ecp;
2009-07-22 14:36:19 +02:00
ec->mode= EC_DISABLED; /* Superfluous */
ifnr= ec-ec_table;
2009-07-22 14:36:19 +02:00
ecp= &ec_conf[ifnr];
update_conf(ec, ecp);
if (ec->mode != EC_ENABLED)
return;
2009-07-22 14:36:19 +02:00
if (!lance_probe(ec))
{
printf("%s: No ethernet card found on PCI-BIOS info.\n",
2009-07-22 14:36:19 +02:00
ec->port_name);
ec->mode= EC_DISABLED;
return;
2009-07-22 14:36:19 +02:00
}
2009-07-22 14:36:19 +02:00
/* XXX */ if (ec->ec_linmem == 0) ec->ec_linmem= 0xFFFF0000;
2009-07-22 14:36:19 +02:00
ec->flags = ECF_EMPTY;
ec->eth_stat = empty_stat;
}
/*===========================================================================*
* update_conf *
*===========================================================================*/
static void update_conf(ec, ecp)
ether_card_t *ec;
ec_conf_t *ecp;
{
2009-07-22 14:36:19 +02:00
long v;
static char ec_fmt[] = "x:d:x:x";
/* Get the default settings and modify them from the environment. */
ec->mode= EC_SINK;
v= ecp->ec_port;
switch (env_parse(ecp->ec_envvar, ec_fmt, 0, &v, 0x0000L, 0xFFFFL))
{
case EP_OFF:
ec->mode= EC_DISABLED;
break;
case EP_ON:
case EP_SET:
default:
ec->mode= EC_ENABLED; /* Might become disabled if
* all probes fail */
break;
}
2009-07-22 14:36:19 +02:00
ec->ec_port= v;
2009-07-22 14:36:19 +02:00
v= ecp->ec_irq | DEI_DEFAULT;
(void) env_parse(ecp->ec_envvar, ec_fmt, 1, &v, 0L,
(long) NR_IRQ_VECTORS - 1);
ec->ec_irq= v;
2009-07-22 14:36:19 +02:00
v= ecp->ec_mem;
(void) env_parse(ecp->ec_envvar, ec_fmt, 2, &v, 0L, 0xFFFFFL);
ec->ec_linmem= v;
2009-07-22 14:36:19 +02:00
v= 0;
(void) env_parse(ecp->ec_envvar, ec_fmt, 3, &v, 0x2000L, 0x8000L);
ec->ec_ramsize= v;
}
/*===========================================================================*
* ec_init *
*===========================================================================*/
static void ec_init(ec)
ether_card_t *ec;
{
2009-07-22 14:36:19 +02:00
int i, r;
2009-07-22 14:36:19 +02:00
/* General initialization */
ec->flags = ECF_EMPTY;
lance_init_card(ec); /* Get mac_address, etc ...*/
2009-07-22 14:36:19 +02:00
ec_confaddr(ec);
#if VERBOSE
2009-07-22 14:36:19 +02:00
printf("%s: Ethernet address ", ec->port_name);
for (i= 0; i < 6; i++)
printf("%x%c", ec->mac_address.ea_addr[i],
i < 5 ? ':' : '\n');
#endif
2009-07-22 14:36:19 +02:00
/* Finish the initialization */
ec->flags |= ECF_ENABLED;
2009-07-22 14:36:19 +02:00
/* Set the interrupt handler */
ec->ec_hook = ec->ec_irq;
if ((r=sys_irqsetpolicy(ec->ec_irq, 0, &ec->ec_hook)) != OK)
printf("lance: error, couldn't set IRQ policy: %d\n", r);
2009-07-22 14:36:19 +02:00
return;
}
/*===========================================================================*
* reply *
*===========================================================================*/
static void reply(ec, err, may_block)
ether_card_t *ec;
int err;
int may_block;
{
2009-07-22 14:36:19 +02:00
message reply;
int status,r;
clock_t now;
status = 0;
if (ec->flags & ECF_PACK_SEND)
status |= DL_PACK_SEND;
if (ec->flags & ECF_PACK_RECV)
status |= DL_PACK_RECV;
reply.m_type = DL_TASK_REPLY;
reply.DL_PORT = ec - ec_table;
reply.DL_PROC = ec->client;
reply.DL_STAT = status | ((u32_t) err << 16);
reply.DL_COUNT = ec->read_s;
if ((r=getuptime(&now)) != OK)
panic("lance", "getuptime() failed:", r);
reply.DL_CLCK = now;
r = send(ec->client, &reply);
if (r == ELOCKED && may_block)
{
return;
2009-07-22 14:36:19 +02:00
}
if (r < 0)
panic( "lance", "send failed:", r);
2009-07-22 14:36:19 +02:00
ec->read_s = 0;
ec->flags &= ~(ECF_PACK_SEND | ECF_PACK_RECV);
}
/*===========================================================================*
* mess_reply *
*===========================================================================*/
static void mess_reply(req, reply_mess)
message *req;
message *reply_mess;
{
2009-07-22 14:36:19 +02:00
if (send(req->m_source, reply_mess) != OK)
panic( "lance", "unable to mess_reply", NO_NUM);
}
/*===========================================================================*
* ec_confaddr *
*===========================================================================*/
static void ec_confaddr(ec)
ether_card_t *ec;
{
2009-07-22 14:36:19 +02:00
int i;
char eakey[16];
static char eafmt[]= "x:x:x:x:x:x";
long v;
2009-07-22 14:36:19 +02:00
/* User defined ethernet address? */
strcpy(eakey, ec_conf[ec-ec_table].ec_envvar);
strcat(eakey, "_EA");
2009-07-22 14:36:19 +02:00
for (i = 0; i < 6; i++)
{
v= ec->mac_address.ea_addr[i];
if (env_parse(eakey, eafmt, i, &v, 0x00L, 0xFFL) != EP_SET)
2009-07-22 14:36:19 +02:00
break;
ec->mac_address.ea_addr[i]= v;
2009-07-22 14:36:19 +02:00
}
2009-07-22 14:36:19 +02:00
if (i != 0 && i != 6)
{
/* It's all or nothing; force a panic. */
(void) env_parse(eakey, "?", 0, &v, 0L, 0L);
2009-07-22 14:36:19 +02:00
}
}
/*===========================================================================*
* ec_reinit *
*===========================================================================*/
static void ec_reinit(ec)
ether_card_t *ec;
{
2009-07-22 14:36:19 +02:00
int i;
unsigned short ioaddr = ec->ec_port;
/* stop */
write_csr(ioaddr, LANCE_CSR0, LANCE_CSR0_STOP);
/* purge Tx-ring */
tx_slot_nr = cur_tx_slot_nr = 0;
for (i=0; i<TX_RING_SIZE; i++)
{
lp->tx_ring[i].u.base = 0;
isstored[i]=0;
}
/* re-init Rx-ring */
rx_slot_nr = 0;
for (i=0; i<RX_RING_SIZE; i++)
{
lp->rx_ring[i].buf_length = -ETH_FRAME_LEN;
lp->rx_ring[i].u.addr[3] |= 0x80;
2009-07-22 14:36:19 +02:00
}
/* Set 'Receive Mode' */
if (ec->flags & ECF_PROMISC)
{
write_csr(ioaddr, LANCE_CSR15, LANCE_CSR15_PROM);
}
else
{
if (ec->flags & (ECF_BROAD | ECF_MULTI))
2009-07-22 14:36:19 +02:00
{
write_csr(ioaddr, LANCE_CSR15, 0x0000);
}
else
2009-07-22 14:36:19 +02:00
{
write_csr(ioaddr, LANCE_CSR15, LANCE_CSR15_DRCVBC);
}
}
2009-07-22 14:36:19 +02:00
/* start && enable interrupt */
write_csr(ioaddr, LANCE_CSR0,
LANCE_CSR0_IDON|LANCE_CSR0_IENA|LANCE_CSR0_STRT);
2009-07-22 14:36:19 +02:00
return;
}
/*===========================================================================*
* ec_check_ints *
*===========================================================================*/
static void ec_check_ints(ec)
ether_card_t *ec;
{
2009-07-22 14:36:19 +02:00
int must_restart = 0;
int check,status;
int isr = 0x0000;
unsigned short ioaddr = ec->ec_port;
2009-07-22 14:36:19 +02:00
if (!(ec->flags & ECF_ENABLED))
panic( "lance", "got premature interrupt", NO_NUM);
2009-07-22 14:36:19 +02:00
for (;;)
{
#if VERBOSE
printf("ETH: Reading ISR...");
#endif
2009-07-22 14:36:19 +02:00
isr = read_csr(ioaddr, LANCE_CSR0);
if (isr & (LANCE_CSR0_ERR|LANCE_CSR0_RINT|LANCE_CSR0_TINT)) {
write_csr(ioaddr, LANCE_CSR0,
isr & ~(LANCE_CSR0_IENA|LANCE_CSR0_TDMD|LANCE_CSR0_STOP
|LANCE_CSR0_STRT|LANCE_CSR0_INIT) );
}
write_csr(ioaddr, LANCE_CSR0,
LANCE_CSR0_BABL|LANCE_CSR0_CERR|LANCE_CSR0_MISS|LANCE_CSR0_MERR
|LANCE_CSR0_IDON|LANCE_CSR0_IENA);
#define ISR_RST 0x0000
2009-07-22 14:36:19 +02:00
if ((isr & (LANCE_CSR0_TINT|LANCE_CSR0_RINT|LANCE_CSR0_MISS
|LANCE_CSR0_BABL|LANCE_CSR0_ERR)) == 0x0000)
{
#if VERBOSE
printf("OK\n");
#endif
2009-07-22 14:36:19 +02:00
break;
}
2009-07-22 14:36:19 +02:00
if (isr & LANCE_CSR0_MISS)
{
#if VERBOSE
printf("RX Missed Frame\n");
#endif
2009-07-22 14:36:19 +02:00
ec->eth_stat.ets_recvErr++;
}
if ((isr & LANCE_CSR0_BABL) || (isr & LANCE_CSR0_TINT))
{
if (isr & LANCE_CSR0_BABL)
{
#if VERBOSE
printf("TX Timeout\n");
#endif
2009-07-22 14:36:19 +02:00
ec->eth_stat.ets_sendErr++;
}
if (isr & LANCE_CSR0_TINT)
{
#if VERBOSE
printf("TX INT\n");
#endif
2009-07-22 14:36:19 +02:00
/* status check: restart if needed. */
status = lp->tx_ring[cur_tx_slot_nr].u.base;
2009-07-22 14:36:19 +02:00
/* ??? */
if (status & 0x40000000)
{
status = lp->tx_ring[cur_tx_slot_nr].misc;
ec->eth_stat.ets_sendErr++;
if (status & 0x0400)
ec->eth_stat.ets_transAb++;
if (status & 0x0800)
ec->eth_stat.ets_carrSense++;
if (status & 0x1000)
ec->eth_stat.ets_OWC++;
if (status & 0x4000)
{
ec->eth_stat.ets_fifoUnder++;
must_restart=1;
}
}
else
{
if (status & 0x18000000)
ec->eth_stat.ets_collision++;
ec->eth_stat.ets_packetT++;
}
}
/* transmit a packet on the next slot if it exists. */
check = 0;
if (isstored[cur_tx_slot_nr]==1)
{
/* free the tx-slot just transmitted */
isstored[cur_tx_slot_nr]=0;
cur_tx_slot_nr = (++cur_tx_slot_nr) & TX_RING_MOD_MASK;
/* next tx-slot is ready? */
if (isstored[cur_tx_slot_nr]==1)
check=1;
else
check=0;
}
else
{
panic( "lance", "got premature TX INT...", NO_NUM);
}
if (check==1)
{
lp->tx_ring[cur_tx_slot_nr].u.addr[3] = 0x83;
write_csr(ioaddr, LANCE_CSR0, LANCE_CSR0_IENA|LANCE_CSR0_TDMD);
}
else
if (check==-1)
continue;
/* we set a buffered message in the slot if it exists. */
/* and transmit it, if needed. */
if (ec->flags & ECF_SEND_AVAIL)
ec_send(ec);
}
if (isr & LANCE_CSR0_RINT)
{
#if VERBOSE
printf("RX INT\n");
#endif
ec_recv(ec);
}
2009-07-22 14:36:19 +02:00
if (isr & ISR_RST)
{
ec->flags = ECF_STOPPED;
#if VERBOSE
printf("ISR_RST\n");
#endif
2009-07-22 14:36:19 +02:00
break;
}
2009-07-22 14:36:19 +02:00
/* ??? cf. lance driver on linux */
if (must_restart == 1)
{
2009-07-22 14:36:19 +02:00
#if VERBOSE
printf("ETH: restarting...\n");
#endif
2009-07-22 14:36:19 +02:00
/* stop */
write_csr(ioaddr, LANCE_CSR0, LANCE_CSR0_STOP);
/* start */
write_csr(ioaddr, LANCE_CSR0, LANCE_CSR0_STRT);
}
2009-07-22 14:36:19 +02:00
}
if ((ec->flags & (ECF_READING|ECF_STOPPED)) == (ECF_READING|ECF_STOPPED))
{
#if VERBOSE
printf("ETH: resetting...\n");
#endif
ec_reset(ec);
}
}
/*===========================================================================*
* ec_reset *
*===========================================================================*/
static void ec_reset(ec)
ether_card_t *ec;
{
2009-07-22 14:36:19 +02:00
/* Stop/start the chip, and clear all RX,TX-slots */
unsigned short ioaddr = ec->ec_port;
int i;
/* stop */
write_csr(ioaddr, LANCE_CSR0, LANCE_CSR0_STOP);
/* start */
write_csr(ioaddr, LANCE_CSR0, LANCE_CSR0_STRT);
/* purge Tx-ring */
tx_slot_nr = cur_tx_slot_nr = 0;
for (i=0; i<TX_RING_SIZE; i++)
{
lp->tx_ring[i].u.base = 0;
isstored[i]=0;
}
/* re-init Rx-ring */
rx_slot_nr = 0;
for (i=0; i<RX_RING_SIZE; i++)
{
lp->rx_ring[i].buf_length = -ETH_FRAME_LEN;
lp->rx_ring[i].u.addr[3] |= 0x80;
2009-07-22 14:36:19 +02:00
}
2009-07-22 14:36:19 +02:00
/* store a buffered message on the slot if exists */
ec_send(ec);
ec->flags &= ~ECF_STOPPED;
}
/*===========================================================================*
* ec_send *
*===========================================================================*/
static void ec_send(ec)
ether_card_t *ec;
{
2009-07-22 14:36:19 +02:00
/* from ec_check_ints() or ec_reset(). */
/* this function proccesses the buffered message. (slot/transmit) */
if (!(ec->flags & ECF_SEND_AVAIL))
return;
2009-07-22 14:36:19 +02:00
ec->flags &= ~ECF_SEND_AVAIL;
switch(ec->sendmsg.m_type)
{
case DL_WRITEV_S: do_vwrite_s(&ec->sendmsg, TRUE); break;
default:
panic( "lance", "wrong type:", ec->sendmsg.m_type);
break;
2009-07-22 14:36:19 +02:00
}
}
/*===========================================================================*
2006-07-10 14:43:38 +02:00
* do_vread_s *
*===========================================================================*/
static void do_vread_s(message *mp)
{
int port, count, r;
2009-07-22 14:36:19 +02:00
ether_card_t *ec;
port = mp->DL_PORT;
count = mp->DL_COUNT;
ec= &ec_table[port];
ec->client= mp->DL_PROC;
r = sys_safecopyfrom(mp->DL_PROC, mp->DL_GRANT, 0,
(vir_bytes)ec->read_iovec.iod_iovec,
(count > IOVEC_NR ? IOVEC_NR : count) *
sizeof(iovec_s_t), D);
if (r != OK)
panic(__FILE__,
"do_vread_s: sys_safecopyfrom failed: %d\n", r);
ec->read_iovec.iod_iovec_s = count;
ec->read_iovec.iod_proc_nr = mp->DL_PROC;
ec->read_iovec.iod_grant = (cp_grant_id_t) mp->DL_GRANT;
2009-07-22 14:36:19 +02:00
ec->read_iovec.iod_iovec_offset = 0;
ec->tmp_iovec = ec->read_iovec;
ec->flags |= ECF_READING;
ec_recv(ec);
if ((ec->flags & (ECF_READING|ECF_STOPPED)) == (ECF_READING|ECF_STOPPED))
ec_reset(ec);
reply(ec, OK, FALSE);
}
/*===========================================================================*
* ec_recv *
*===========================================================================*/
static void ec_recv(ec)
ether_card_t *ec;
{
2009-07-22 14:36:19 +02:00
vir_bytes length;
int packet_processed;
int status;
unsigned short ioaddr = ec->ec_port;
if ((ec->flags & ECF_READING)==0)
return;
if (!(ec->flags & ECF_ENABLED))
return;
/* we check all the received slots until find a properly received packet */
packet_processed = FALSE;
while (!packet_processed)
{
status = lp->rx_ring[rx_slot_nr].u.base >> 24;
if ( (status & 0x80) == 0x00 )
2009-07-22 14:36:19 +02:00
{
status = lp->rx_ring[rx_slot_nr].u.base >> 24;
/* ??? */
if (status != 0x03)
{
if (status & 0x01)
ec->eth_stat.ets_recvErr++;
if (status & 0x04)
ec->eth_stat.ets_fifoOver++;
if (status & 0x08)
ec->eth_stat.ets_CRCerr++;
if (status & 0x10)
ec->eth_stat.ets_OVW++;
if (status & 0x20)
ec->eth_stat.ets_frameAll++;
length = 0;
}
else
{
ec->eth_stat.ets_packetR++;
length = lp->rx_ring[rx_slot_nr].msg_length;
}
if (length > 0)
{
ec_nic2user(ec, (int)(lp->rbuf[rx_slot_nr]),
&ec->read_iovec, 0, length);
2009-07-22 14:36:19 +02:00
ec->read_s = length;
ec->flags |= ECF_PACK_RECV;
ec->flags &= ~ECF_READING;
packet_processed = TRUE;
}
/* set up this slot again, and we move to the next slot */
lp->rx_ring[rx_slot_nr].buf_length = -ETH_FRAME_LEN;
lp->rx_ring[rx_slot_nr].u.addr[3] |= 0x80;
write_csr(ioaddr, LANCE_CSR0,
LANCE_CSR0_BABL|LANCE_CSR0_CERR|LANCE_CSR0_MISS
|LANCE_CSR0_MERR|LANCE_CSR0_IDON|LANCE_CSR0_IENA);
rx_slot_nr = (++rx_slot_nr) & RX_RING_MOD_MASK;
}
else
2009-07-22 14:36:19 +02:00
break;
}
}
/*===========================================================================*
2006-07-10 14:43:38 +02:00
* do_vwrite_s *
*===========================================================================*/
2006-07-10 14:43:38 +02:00
static void do_vwrite_s(mp, from_int)
message *mp;
int from_int;
{
2009-07-22 14:36:19 +02:00
int port, count, check, r;
ether_card_t *ec;
unsigned short ioaddr;
2009-07-22 14:36:19 +02:00
port = mp->DL_PORT;
count = mp->DL_COUNT;
ec = &ec_table[port];
ec->client= mp->DL_PROC;
2009-07-22 14:36:19 +02:00
if (isstored[tx_slot_nr]==1)
{
/* all slots are used, so this message is buffered */
ec->sendmsg= *mp;
ec->flags |= ECF_SEND_AVAIL;
reply(ec, OK, FALSE);
return;
2009-07-22 14:36:19 +02:00
}
/* convert the message to write_iovec */
r = sys_safecopyfrom(mp->DL_PROC, mp->DL_GRANT, 0,
(vir_bytes)ec->write_iovec.iod_iovec,
(count > IOVEC_NR ? IOVEC_NR : count) *
sizeof(iovec_s_t), D);
if (r != OK)
panic(__FILE__,
"do_vwrite_s: sys_safecopyfrom failed: %d\n", r);
ec->write_iovec.iod_iovec_s = count;
ec->write_iovec.iod_proc_nr = mp->DL_PROC;
ec->write_iovec.iod_grant = mp->DL_GRANT;
ec->write_iovec.iod_iovec_offset = 0;
ec->tmp_iovec = ec->write_iovec;
ec->write_s = calc_iovec_size(&ec->tmp_iovec);
/* copy write_iovec to the slot on DMA address */
ec_user2nic(ec, &ec->write_iovec, 0,
(int)(lp->tbuf[tx_slot_nr]), ec->write_s);
/* set-up for transmitting, and transmit it if needed. */
lp->tx_ring[tx_slot_nr].buf_length = -ec->write_s;
lp->tx_ring[tx_slot_nr].misc = 0x0;
lp->tx_ring[tx_slot_nr].u.base
= virt_to_bus(lp->tbuf[tx_slot_nr]) & 0xffffff;
isstored[tx_slot_nr]=1;
if (cur_tx_slot_nr == tx_slot_nr)
check=1;
else
check=0;
tx_slot_nr = (++tx_slot_nr) & TX_RING_MOD_MASK;
if (check == 1)
{
ioaddr = ec->ec_port;
lp->tx_ring[cur_tx_slot_nr].u.addr[3] = 0x83;
2009-07-22 14:36:19 +02:00
write_csr(ioaddr, LANCE_CSR0, LANCE_CSR0_IENA|LANCE_CSR0_TDMD);
}
2009-07-22 14:36:19 +02:00
ec->flags |= ECF_PACK_SEND;
2009-07-22 14:36:19 +02:00
/* reply by calling do_int() if this function is called from interrupt. */
if (from_int)
return;
reply(ec, OK, FALSE);
}
/*===========================================================================*
* ec_user2nic *
*===========================================================================*/
static void ec_user2nic(ec, iovp, offset, nic_addr, count)
ether_card_t *ec;
iovec_dat_t *iovp;
vir_bytes offset;
int nic_addr;
vir_bytes count;
{
2009-07-22 14:36:19 +02:00
int bytes, i, r;
2009-07-22 14:36:19 +02:00
i= 0;
while (count > 0)
{
if (i >= IOVEC_NR)
2009-07-22 14:36:19 +02:00
{
ec_next_iovec(iovp);
i= 0;
continue;
}
if (offset >= iovp->iod_iovec[i].iov_size)
2009-07-22 14:36:19 +02:00
{
offset -= iovp->iod_iovec[i].iov_size;
i++;
continue;
}
bytes = iovp->iod_iovec[i].iov_size - offset;
if (bytes > count)
2009-07-22 14:36:19 +02:00
bytes = count;
2006-07-10 14:43:38 +02:00
if ( (r=sys_safecopyfrom(iovp->iod_proc_nr,
2009-07-22 14:36:19 +02:00
iovp->iod_iovec[i].iov_grant, offset,
nic_addr, bytes, D )) != OK )
panic( __FILE__, "ec_user2nic: sys_safecopyfrom failed", r );
count -= bytes;
nic_addr += bytes;
offset += bytes;
2009-07-22 14:36:19 +02:00
}
}
/*===========================================================================*
* ec_nic2user *
*===========================================================================*/
static void ec_nic2user(ec, nic_addr, iovp, offset, count)
ether_card_t *ec;
int nic_addr;
iovec_dat_t *iovp;
vir_bytes offset;
vir_bytes count;
{
2009-07-22 14:36:19 +02:00
int bytes, i, r;
2009-07-22 14:36:19 +02:00
i= 0;
while (count > 0)
{
if (i >= IOVEC_NR)
2009-07-22 14:36:19 +02:00
{
ec_next_iovec(iovp);
i= 0;
continue;
}
if (offset >= iovp->iod_iovec[i].iov_size)
2009-07-22 14:36:19 +02:00
{
offset -= iovp->iod_iovec[i].iov_size;
i++;
continue;
}
bytes = iovp->iod_iovec[i].iov_size - offset;
if (bytes > count)
2009-07-22 14:36:19 +02:00
bytes = count;
2006-07-10 14:43:38 +02:00
if ( (r=sys_safecopyto( iovp->iod_proc_nr, iovp->iod_iovec[i].iov_grant,
2009-07-22 14:36:19 +02:00
offset, nic_addr, bytes, D )) != OK )
panic( __FILE__, "ec_nic2user: sys_safecopyto failed: ", r );
count -= bytes;
nic_addr += bytes;
offset += bytes;
2009-07-22 14:36:19 +02:00
}
}
/*===========================================================================*
* calc_iovec_size *
*===========================================================================*/
static int calc_iovec_size(iovec_dat_t *iovp)
{
2009-07-22 14:36:19 +02:00
int size,i;
2009-07-22 14:36:19 +02:00
size = i = 0;
2009-07-22 14:36:19 +02:00
while (i < iovp->iod_iovec_s)
{
if (i >= IOVEC_NR)
2009-07-22 14:36:19 +02:00
{
ec_next_iovec(iovp);
i= 0;
continue;
}
size += iovp->iod_iovec[i].iov_size;
i++;
2009-07-22 14:36:19 +02:00
}
2009-07-22 14:36:19 +02:00
return size;
}
/*===========================================================================*
2009-07-22 14:36:19 +02:00
* ec_next_iovec *
*===========================================================================*/
static void ec_next_iovec(iovp)
iovec_dat_t *iovp;
{
2009-07-22 14:36:19 +02:00
int r;
iovp->iod_iovec_s -= IOVEC_NR;
iovp->iod_iovec_offset += IOVEC_NR * sizeof(iovec_s_t);
r = sys_safecopyfrom(iovp->iod_proc_nr, iovp->iod_grant,
iovp->iod_iovec_offset,
(vir_bytes)iovp->iod_iovec,
(iovp->iod_iovec_s > IOVEC_NR ?
IOVEC_NR : iovp->iod_iovec_s) *
sizeof(iovec_s_t), D);
if (r != OK)
panic(__FILE__,
"ec_next_iovec: sys_safecopyfrom failed: %d\n", r);
}
/*===========================================================================*
2006-07-10 14:43:38 +02:00
* do_getstat_s *
*===========================================================================*/
2006-07-10 14:43:38 +02:00
static void do_getstat_s(mp)
message *mp;
{
2009-07-22 14:36:19 +02:00
int r, port;
ether_card_t *ec;
2009-07-22 14:36:19 +02:00
port = mp->DL_PORT;
if (port < 0 || port >= EC_PORT_NR_MAX)
panic( "lance", "illegal port", port);
2009-07-22 14:36:19 +02:00
ec= &ec_table[port];
ec->client= mp->DL_PROC;
2009-07-22 14:36:19 +02:00
r = sys_safecopyto(mp->DL_PROC, mp->DL_GRANT, 0,
(vir_bytes)&ec->eth_stat, sizeof(ec->eth_stat), D);
2009-07-22 14:36:19 +02:00
if (r != OK)
panic(__FILE__,
"do_getstat_s: sys_safecopyto failed: %d\n", r);
2009-07-22 14:36:19 +02:00
mp->m_type= DL_STAT_REPLY;
mp->DL_PORT= port;
mp->DL_STAT= OK;
r= send(mp->m_source, mp);
if (r != OK)
panic(__FILE__, "do_getstat_s: send failed: %d\n", r);
}
/*===========================================================================*
* do_stop *
*===========================================================================*/
static void do_stop(mp)
message *mp;
{
2009-07-22 14:36:19 +02:00
int port;
ether_card_t *ec;
unsigned short ioaddr;
2009-07-22 14:36:19 +02:00
port = mp->DL_PORT;
if (port < 0 || port >= EC_PORT_NR_MAX)
panic( "lance", "illegal port", port);
ec = &ec_table[port];
2009-07-22 14:36:19 +02:00
if (!(ec->flags & ECF_ENABLED))
return;
2009-07-22 14:36:19 +02:00
ioaddr = ec->ec_port;
2009-07-22 14:36:19 +02:00
/* stop */
write_csr(ioaddr, LANCE_CSR0, LANCE_CSR0_STOP);
2009-07-22 14:36:19 +02:00
/* Reset */
in_word(ioaddr+LANCE_RESET);
ec->flags = ECF_EMPTY;
}
2009-07-22 14:36:19 +02:00
/*===========================================================================*
* getAddressing *
*===========================================================================*/
static void getAddressing(devind, ec)
int devind;
ether_card_t *ec;
{
2009-07-22 14:36:19 +02:00
unsigned int membase, ioaddr;
int reg, irq;
for (reg = PCI_BASE_ADDRESS_0; reg <= PCI_BASE_ADDRESS_5; reg += 4)
{
ioaddr = pci_attr_r32(devind, reg);
if ((ioaddr & PCI_BASE_ADDRESS_IO_MASK) == 0
|| (ioaddr & PCI_BASE_ADDRESS_SPACE_IO) == 0)
continue;
/* Strip the I/O address out of the returned value */
ioaddr &= PCI_BASE_ADDRESS_IO_MASK;
/* Get the memory base address */
membase = pci_attr_r32(devind, PCI_BASE_ADDRESS_1);
/* KK: Get the IRQ number */
irq = pci_attr_r8(devind, PCI_INTERRUPT_PIN);
if (irq)
irq = pci_attr_r8(devind, PCI_INTERRUPT_LINE);
ec->ec_linmem = membase;
ec->ec_port = ioaddr;
ec->ec_irq = irq;
}
}
/*===========================================================================*
2009-07-22 14:36:19 +02:00
* lance_probe *
*===========================================================================*/
static int lance_probe(ec)
ether_card_t *ec;
{
unsigned short pci_cmd;
2009-07-22 14:36:19 +02:00
unsigned short ioaddr;
int lance_version, chip_version;
int devind, just_one, i, r;
u16_t vid, did;
char *dname;
if ((ec->ec_pcibus | ec->ec_pcidev | ec->ec_pcifunc) != 0)
{
/* Look for specific PCI device */
r= pci_find_dev(ec->ec_pcibus, ec->ec_pcidev,
ec->ec_pcifunc, &devind);
if (r == 0)
{
printf("%s: no PCI found at %d.%d.%d\n",
ec->port_name, ec->ec_pcibus,
ec->ec_pcidev, ec->ec_pcifunc);
return 0;
}
pci_ids(devind, &vid, &did);
just_one= TRUE;
}
else
{
r= pci_first_dev(&devind, &vid, &did);
if (r == 0)
return 0;
just_one= FALSE;
}
for(;;)
{
for (i= 0; pcitab[i].vid != 0; i++)
{
if (pcitab[i].vid != vid)
continue;
if (pcitab[i].did != did)
continue;
if (pcitab[i].checkclass)
{
panic("lance",
"class check not implemented", NO_NUM);
}
break;
}
if (pcitab[i].vid != 0)
break;
if (just_one)
{
2009-07-22 14:36:19 +02:00
printf(
"%s: wrong PCI device (%04x/%04x) found at %d.%d.%d\n",
ec->port_name, vid, did,
ec->ec_pcibus,
ec->ec_pcidev, ec->ec_pcifunc);
return 0;
}
2009-07-22 14:36:19 +02:00
r= pci_next_dev(&devind, &vid, &did);
if (!r)
return 0;
}
dname= pci_dev_name(vid, did);
if (!dname)
dname= "unknown device";
pci_reserve(devind);
getAddressing(devind, ec);
/* ===== Bus Master ? ===== */
pci_cmd = pci_attr_r32(devind, PCI_CR);
if (!(pci_cmd & PCI_COMMAND_MASTER)) {
pci_cmd |= PCI_COMMAND_MASTER;
pci_attr_w32(devind, PCI_CR, pci_cmd);
}
/* ===== Probe Details ===== */
ioaddr = ec->ec_port;
/* Reset */
in_word(ioaddr+LANCE_RESET);
if (read_csr(ioaddr, LANCE_CSR0) != LANCE_CSR0_STOP)
{
ec->mode=EC_DISABLED;
2009-07-22 14:36:19 +02:00
}
/* Probe Chip Version */
out_word(ioaddr+LANCE_ADDR, 88); /* Get the version of the chip */
if (in_word(ioaddr+LANCE_ADDR) != 88)
lance_version = 0;
else
{
chip_version = read_csr(ioaddr, LANCE_CSR88);
chip_version |= read_csr(ioaddr, LANCE_CSR89) << 16;
if ((chip_version & 0xfff) != 0x3)
2009-07-22 14:36:19 +02:00
{
ec->mode=EC_DISABLED;
}
chip_version = (chip_version >> 12) & 0xffff;
for (lance_version = 1; chip_table[lance_version].id_number != 0;
++lance_version)
2009-07-22 14:36:19 +02:00
if (chip_table[lance_version].id_number == chip_version)
break;
}
#if VERBOSE
printf("%s: %s at %X:%d\n",
ec->port_name, chip_table[lance_version].name,
ec->ec_port, ec->ec_irq);
#endif
2009-07-22 14:36:19 +02:00
return lance_version;
}
/*===========================================================================*
2009-07-22 14:36:19 +02:00
* do_getname *
*===========================================================================*/
static void do_getname(mp)
message *mp;
{
2009-07-22 14:36:19 +02:00
int r;
strncpy(mp->DL_NAME, progname, sizeof(mp->DL_NAME));
mp->DL_NAME[sizeof(mp->DL_NAME)-1]= '\0';
mp->m_type= DL_NAME_REPLY;
r= send(mp->m_source, mp);
if (r != OK)
panic("LANCE", "do_getname: send failed", r);
}
/*===========================================================================*
2009-07-22 14:36:19 +02:00
* lance_init_card *
*===========================================================================*/
static void lance_init_card(ec)
ether_card_t *ec;
{
2009-07-22 14:36:19 +02:00
int i;
Address l = (vir_bytes)lance_buf;
unsigned short ioaddr = ec->ec_port;
/* ============= setup init_block(cf. lance_probe1) ================ */
/* make sure data structure is 8-byte aligned and below 16MB (for DMA) */
lp = (struct lance_interface *)l;
/* disable Tx and Rx */
lp->init_block.mode = LANCE_CSR15_DTX|LANCE_CSR15_DRX;
lp->init_block.filter[0] = lp->init_block.filter[1] = 0x0;
/* using multiple Rx/Tx buffer */
lp->init_block.rx_ring
= (virt_to_bus(&lp->rx_ring) & 0xffffff) | RX_RING_LEN_BITS;
lp->init_block.tx_ring
= (virt_to_bus(&lp->tx_ring) & 0xffffff) | TX_RING_LEN_BITS;
l = virt_to_bus(&lp->init_block);
write_csr(ioaddr, LANCE_CSR1, (unsigned short)l);
write_csr(ioaddr, LANCE_CSR2, (unsigned short)(l >> 16));
write_csr(ioaddr, LANCE_CSR4,
LANCE_CSR4_APAD_XMT|LANCE_CSR4_MFCOM|LANCE_CSR4_RCVCCOM
|LANCE_CSR4_TXSTRTM|LANCE_CSR4_JABM);
/* ============= Get MAC address (cf. lance_probe1) ================ */
for (i = 0; i < 6; ++i)
ec->mac_address.ea_addr[i]=in_byte(ioaddr+LANCE_ETH_ADDR+i);
/* ============ (re)start init_block(cf. lance_reset) =============== */
/* Reset the LANCE */
(void)in_word(ioaddr+LANCE_RESET);
/* ----- Re-initialize the LANCE ----- */
/* Set station address */
for (i = 0; i < 6; ++i)
lp->init_block.phys_addr[i] = ec->mac_address.ea_addr[i];
/* Preset the receive ring headers */
for (i=0; i<RX_RING_SIZE; i++)
{
lp->rx_ring[i].buf_length = -ETH_FRAME_LEN;
/* OWN */
lp->rx_ring[i].u.base = virt_to_bus(lp->rbuf[i]) & 0xffffff;
/* we set the top byte as the very last thing */
lp->rx_ring[i].u.addr[3] = 0x80;
}
/* Preset the transmitting ring headers */
for (i=0; i<TX_RING_SIZE; i++)
{
lp->tx_ring[i].u.base = 0;
isstored[i] = 0;
}
/* enable Rx and Tx */
lp->init_block.mode = 0x0;
l = (Address)virt_to_bus(&lp->init_block);
write_csr(ioaddr, LANCE_CSR1, (short)l);
write_csr(ioaddr, LANCE_CSR2, (short)(l >> 16));
write_csr(ioaddr, LANCE_CSR4,
LANCE_CSR4_APAD_XMT|LANCE_CSR4_MFCOM|LANCE_CSR4_RCVCCOM
|LANCE_CSR4_TXSTRTM|LANCE_CSR4_JABM);
/* ----- start when init done. ----- */
/* stop */
write_csr(ioaddr, LANCE_CSR0, LANCE_CSR0_STOP);
/* init */
write_csr(ioaddr, LANCE_CSR0, LANCE_CSR0_INIT);
/* poll for IDON */
for (i = 10000; i > 0; --i)
if (read_csr(ioaddr, LANCE_CSR0) & LANCE_CSR0_IDON)
break;
/* Set 'Multicast Table' */
for (i=0;i<4;++i)
{
write_csr(ioaddr, LANCE_CSR8 + i, 0xffff);
}
/* Set 'Receive Mode' */
if (ec->flags & ECF_PROMISC)
{
write_csr(ioaddr, LANCE_CSR15, LANCE_CSR15_PROM);
}
else
{
if (ec->flags & (ECF_BROAD | ECF_MULTI))
2009-07-22 14:36:19 +02:00
{
write_csr(ioaddr, LANCE_CSR15, 0x0000);
}
else
2009-07-22 14:36:19 +02:00
{
write_csr(ioaddr, LANCE_CSR15, LANCE_CSR15_DRCVBC);
}
}
/* start && enable interrupt */
write_csr(ioaddr, LANCE_CSR0,
LANCE_CSR0_IDON|LANCE_CSR0_IENA|LANCE_CSR0_STRT);
return;
}
/*===========================================================================*
* in_byte *
*===========================================================================*/
static u8_t in_byte(port_t port)
{
int r;
u32_t value;
r= sys_inb(port, &value);
if (r != OK)
panic("lance","sys_inb failed", r);
return value;
}
/*===========================================================================*
* in_word *
*===========================================================================*/
static u16_t in_word(port_t port)
{
int r;
u32_t value;
r= sys_inw(port, &value);
if (r != OK)
panic("lance","sys_inw failed", r);
return value;
}
2009-07-22 14:36:19 +02:00
/*===========================================================================*
* out_word *
*===========================================================================*/
static void out_word(port_t port, u16_t value)
{
int r;
r= sys_outw(port, value);
if (r != OK)
panic("lance","sys_outw failed", r);
}
/*===========================================================================*
* read_csr *
*===========================================================================*/
static u16_t read_csr(port_t ioaddr, u16_t csrno)
{
out_word(ioaddr+LANCE_ADDR, csrno);
return in_word(ioaddr+LANCE_DATA);
}
/*===========================================================================*
* write_csr *
*===========================================================================*/
static void write_csr(port_t ioaddr, u16_t csrno, u16_t value)
{
out_word(ioaddr+LANCE_ADDR, csrno);
out_word(ioaddr+LANCE_DATA, value);
}