minix/drivers/mmc/mmchost_mmchs.c

970 lines
24 KiB
C
Raw Normal View History

/* kernel headers */
#include <minix/blockdriver.h>
#include <minix/com.h>
#include <minix/vm.h>
#include <minix/spin.h>
#include <sys/mman.h>
#include <sys/time.h>
/* usr headers */
#include <assert.h>
#include <stdio.h>
#include <stdlib.h>
#include <stdarg.h>
#include <string.h>
#include <inttypes.h>
#include <limits.h>
#include <unistd.h>
/* local headers */
#include "mmclog.h"
#include "mmchost.h"
/* header imported from netbsd */
#include "sdmmcreg.h"
#include "sdmmcreg.h"
#include "sdhcreg.h"
/* omap /hardware related */
#include "omap_mmc.h"
#define USE_INTR
#ifdef USE_INTR
static int hook_id = 1;
#ifdef DM37XX
#define OMAP3_MMC1_IRQ 83 /* MMC/SD module 1 */
#endif
#ifdef AM335X
#define OMAP3_MMC1_IRQ 64 /* MMC/SD module 1 */
#endif
#endif
#define SANE_TIMEOUT 500000 /* 500 MS */
/*
* Define a structure to be used for logging
*/
static struct mmclog log = {
.name = "mmc_host_mmchs",
.log_level = LEVEL_INFO,
.log_func = default_log
};
#define REG(x)(*((volatile uint32_t *)(x)))
#define BIT(x)(0x1 << x)
/* Write a uint32_t value to a memory address. */
static inline void
write32(uint32_t address, uint32_t value)
{
REG(address) = value;
}
/* Read an uint32_t from a memory address */
static inline uint32_t
read32(uint32_t address)
{
return REG(address);
}
/* Set a 32 bits value depending on a mask */
static inline void
set32(uint32_t address, uint32_t mask, uint32_t value)
{
uint32_t val;
val = read32(address);
/* clear the bits */
val &= ~(mask);
/* apply the value using the mask */
val |= (value & mask);
write32(address, val);
}
static uint32_t base_address;
/*
* Initialize the MMC controller given a certain
* instance. this driver only handles a single
* mmchs controller at a given time.
*/
int
mmchs_init(uint32_t instance)
{
uint32_t value;
value = 0;
struct minix_mem_range mr;
spin_t spin;
mr.mr_base = MMCHS1_REG_BASE;
mr.mr_limit = MMCHS1_REG_BASE + 0x400;
if (sys_privctl(SELF, SYS_PRIV_ADD_MEM, &mr) != 0) {
panic("Unable to request permission to map memory");
}
/* Set the base address to use */
base_address =
(uint32_t) vm_map_phys(SELF, (void *) MMCHS1_REG_BASE, 0x400);
if (base_address == (uint32_t) MAP_FAILED)
panic("Unable to map MMC memory");
#ifdef DM37XX
base_address = (unsigned long) base_address - 0x100;
#endif
/* Soft reset of the controller. This section is documented in the TRM
*/
/* Write 1 to sysconfig[0] to trigger a reset */
set32(base_address + MMCHS_SD_SYSCONFIG, MMCHS_SD_SYSCONFIG_SOFTRESET,
MMCHS_SD_SYSCONFIG_SOFTRESET);
/* Read sysstatus to know when it's done */
spin_init(&spin, SANE_TIMEOUT);
while (!(read32(base_address + MMCHS_SD_SYSSTATUS)
& MMCHS_SD_SYSSTATUS_RESETDONE)) {
if (spin_check(&spin) == FALSE) {
mmc_log_warn(&log, "mmc init timeout\n");
return 1;
}
}
/* Set SD default capabilities */
set32(base_address + MMCHS_SD_CAPA, MMCHS_SD_CAPA_VS_MASK,
MMCHS_SD_CAPA_VS18 | MMCHS_SD_CAPA_VS30);
/* TRM mentions MMCHS_SD_CUR_CAPA but does not describe how to limit
* the current */
uint32_t mask =
MMCHS_SD_SYSCONFIG_AUTOIDLE | MMCHS_SD_SYSCONFIG_ENAWAKEUP |
MMCHS_SD_SYSCONFIG_STANDBYMODE | MMCHS_SD_SYSCONFIG_CLOCKACTIVITY |
MMCHS_SD_SYSCONFIG_SIDLEMODE;
/* Automatic clock gating strategy */
value = MMCHS_SD_SYSCONFIG_AUTOIDLE_EN;
/* Enable wake-up capability */
value |= MMCHS_SD_SYSCONFIG_ENAWAKEUP_EN;
/* Smart-idle */
value |= MMCHS_SD_SYSCONFIG_SIDLEMODE_IDLE;
/* Booth the interface and functional can be switched off */
value |= MMCHS_SD_SYSCONFIG_CLOCKACTIVITY_OFF;
/* Go into wake-up mode when possible */
value |= MMCHS_SD_SYSCONFIG_STANDBYMODE_WAKEUP_INTERNAL;
/*
* wake-up configuration
*/
set32(base_address + MMCHS_SD_SYSCONFIG, mask, value);
/* Wake-up on sd interrupt for SDIO */
set32(base_address + MMCHS_SD_HCTL, MMCHS_SD_HCTL_IWE,
MMCHS_SD_HCTL_IWE_EN);
/*
* MMC host and bus configuration
*/
/* Configure data and command transfer (1 bit mode) */
set32(base_address + MMCHS_SD_CON, MMCHS_SD_CON_DW8,
MMCHS_SD_CON_DW8_1BIT);
set32(base_address + MMCHS_SD_HCTL, MMCHS_SD_HCTL_DTW,
MMCHS_SD_HCTL_DTW_1BIT);
/* Configure card voltage to 3.0 volt */
set32(base_address + MMCHS_SD_HCTL, MMCHS_SD_HCTL_SDVS,
MMCHS_SD_HCTL_SDVS_VS30);
/* Power on the host controller and wait for the
* MMCHS_SD_HCTL_SDBP_POWER_ON to be set */
set32(base_address + MMCHS_SD_HCTL, MMCHS_SD_HCTL_SDBP,
MMCHS_SD_HCTL_SDBP_ON);
// /* TODO: Add padconf/pinmux stuff here as documented in the TRM */
spin_init(&spin, SANE_TIMEOUT);
while ((read32(base_address + MMCHS_SD_HCTL) & MMCHS_SD_HCTL_SDBP)
!= MMCHS_SD_HCTL_SDBP_ON) {
if (spin_check(&spin) == FALSE) {
mmc_log_warn(&log, "mmc init timeout SDBP not set\n");
return 1;
}
}
/* Enable internal clock and clock to the card */
set32(base_address + MMCHS_SD_SYSCTL, MMCHS_SD_SYSCTL_ICE,
MMCHS_SD_SYSCTL_ICE_EN);
// @TODO Fix external clock enable , this one is very slow
// but we first need faster context switching
//set32(base_address + MMCHS_SD_SYSCTL, MMCHS_SD_SYSCTL_CLKD,
// (0x20 << 6));
set32(base_address + MMCHS_SD_SYSCTL, MMCHS_SD_SYSCTL_CLKD,
(0x5 << 6));
set32(base_address + MMCHS_SD_SYSCTL, MMCHS_SD_SYSCTL_CEN,
MMCHS_SD_SYSCTL_CEN_EN);
spin_init(&spin, SANE_TIMEOUT);
while ((read32(base_address + MMCHS_SD_SYSCTL) & MMCHS_SD_SYSCTL_ICS)
!= MMCHS_SD_SYSCTL_ICS_STABLE) {
if (spin_check(&spin) == FALSE) {
mmc_log_warn(&log, "clock not stable\n");
return 1;
}
}
/*
* See spruh73e page 3576 Card Detection, Identification, and Selection
*/
/* Enable command interrupt */
set32(base_address + MMCHS_SD_IE, MMCHS_SD_IE_CC_ENABLE,
MMCHS_SD_IE_CC_ENABLE_ENABLE);
/* Enable transfer complete interrupt */
set32(base_address + MMCHS_SD_IE, MMCHS_SD_IE_TC_ENABLE,
MMCHS_SD_IE_TC_ENABLE_ENABLE);
/* enable error interrupts */
/* NOTE: We are currently skipping the BADA interrupt it does get
* raised for unknown reasons */
set32(base_address + MMCHS_SD_IE, MMCHS_SD_IE_ERROR_MASK, 0x0fffffffu);
/* clean the error interrupts */
set32(base_address + MMCHS_SD_STAT, MMCHS_SD_STAT_ERROR_MASK,
0xffffffffu);
/* send a init signal to the host controller. This does not actually
* send a command to a card manner */
set32(base_address + MMCHS_SD_CON, MMCHS_SD_CON_INIT,
MMCHS_SD_CON_INIT_INIT);
/* command 0 , type other commands not response etc) */
write32(base_address + MMCHS_SD_CMD, 0x00);
spin_init(&spin, SANE_TIMEOUT);
while ((read32(base_address + MMCHS_SD_STAT) & MMCHS_SD_STAT_CC)
!= MMCHS_SD_STAT_CC_RAISED) {
if (read32(base_address + MMCHS_SD_STAT) & 0x8000) {
mmc_log_warn(&log, "%s, error stat %x\n",
__FUNCTION__,
read32(base_address + MMCHS_SD_STAT));
return 1;
}
if (spin_check(&spin) == FALSE) {
mmc_log_warn(&log,
"Interrupt not raised during init\n");
return 1;
}
}
/* clear the cc interrupt status */
set32(base_address + MMCHS_SD_STAT, MMCHS_SD_IE_CC_ENABLE,
MMCHS_SD_IE_CC_ENABLE_ENABLE);
/*
* Set Set SD_CON[1] INIT bit to 0x0 to end the initialization sequence
*/
set32(base_address + MMCHS_SD_CON, MMCHS_SD_CON_INIT,
MMCHS_SD_CON_INIT_NOINIT);
/* Set timeout */
set32(base_address + MMCHS_SD_SYSCTL, MMCHS_SD_SYSCTL_DTO,
MMCHS_SD_SYSCTL_DTO_2POW27);
/* Clean the MMCHS_SD_STAT register */
write32(base_address + MMCHS_SD_STAT, 0xffffffffu);
#ifdef USE_INTR
hook_id = 1;
if (sys_irqsetpolicy(OMAP3_MMC1_IRQ, 0, &hook_id) != OK) {
printf("mmc: couldn't set IRQ policy %d\n", OMAP3_MMC1_IRQ);
return 1;
}
/* enable signaling from MMC controller towards interrupt controller */
write32(base_address + MMCHS_SD_ISE, 0xffffffffu);
#endif
return 0;
}
static void
mmchs_hw_intr(unsigned int irqs)
{
mmc_log_warn(&log, "Hardware interrupt left over\n");
#ifdef USE_INTR
if (sys_irqenable(&hook_id) != OK)
printf("couldn't re-enable interrupt \n");
#endif
/* Leftover interrupt(s) received; ack it/them. */
}
/*===========================================================================*
* w_intr_wait *
*===========================================================================*/
static int
intr_wait(int mask)
{
long v;
#ifdef USE_INTR
if (sys_irqenable(&hook_id) != OK)
printf("Failed to enable irqenable irq\n");
/* Wait for a task completion interrupt. */
message m;
int ipc_status;
int ticks = SANE_TIMEOUT * sys_hz() / 1000000;
if (ticks <= 0) ticks =1;
while (1) {
int rr;
sys_setalarm(ticks, 0);
if ((rr = driver_receive(ANY, &m, &ipc_status)) != OK) {
panic("driver_receive failed: %d", rr);
};
if (is_ipc_notify(ipc_status)) {
switch (_ENDPOINT_P(m.m_source)) {
case CLOCK:
/* Timeout. */
// w_timeout(); /* a.o. set w_status */
mmc_log_warn(&log, "TIMEOUT\n");
return 1;
break;
case HARDWARE:
v = read32(base_address + MMCHS_SD_STAT);
if (v & mask) {
sys_setalarm(0, 0);
return 0;
} else if (v & (1 << 15)){
return 1; /* error */
} else {
mmc_log_debug(&log, "unexpected HW interrupt 0x%08x mask 0X%08x\n", v, mask);
if (sys_irqenable(&hook_id) != OK)
printf
("Failed to re-enable irqenable irq\n");
continue;
// return 1;
}
default:
/*
* unhandled message. queue it and
* handle it in the blockdriver loop.
*/
blockdriver_mq_queue(&m, ipc_status);
}
} else {
mmc_log_debug(&log, "Other\n");
/*
* unhandled message. queue it and handle it in the
* blockdriver loop.
*/
blockdriver_mq_queue(&m, ipc_status);
}
}
sys_setalarm(0, 0); /* cancel the alarm */
#else
spin_t spin;
spin_init(&spin, SANE_TIMEOUT);
/* Wait for completion */
int counter =0;
while (1 == 1) {
counter ++;
v = read32(base_address + MMCHS_SD_STAT);
if (spin_check(&spin) == FALSE) {
mmc_log_warn(&log, "Timeout waiting for interrupt (%d) value 0x%08x mask 0x%08x\n",counter, v,mask);
return 1;
}
if (v & mask) {
return 0;
} else if (v & 0xFF00) {
mmc_log_debug(&log, "unexpected HW interrupt (%d) 0x%08x mask 0x%08x\n", v, mask);
return 1;
}
}
return 1; /* unreached */
#endif /* USE_INTR */
}
void
intr_assert(int mask)
{
if (read32(base_address + MMCHS_SD_STAT) & 0x8000) {
mmc_log_debug(&log, "%s, error stat %08x\n", __FUNCTION__,
read32(base_address + MMCHS_SD_STAT));
set32(base_address + MMCHS_SD_STAT, MMCHS_SD_STAT_ERROR_MASK,
0xffffffffu);
} else {
write32(base_address + MMCHS_SD_STAT, mask);
}
}
int
mmchs_send_cmd(uint32_t command, uint32_t arg)
{
/* Read current interrupt status and fail it an interrupt is already
* asserted */
/* Set arguments */
write32(base_address + MMCHS_SD_ARG, arg);
/* Set command */
set32(base_address + MMCHS_SD_CMD, MMCHS_SD_CMD_MASK, command);
if (intr_wait(MMCHS_SD_STAT_CC | MMCHS_SD_IE_TC_ENABLE_CLEAR)) {
intr_assert(MMCHS_SD_STAT_CC);
mmc_log_warn(&log, "Failure waiting for interrupt\n");
return 1;
}
if ((command & MMCHS_SD_CMD_RSP_TYPE) ==
MMCHS_SD_CMD_RSP_TYPE_48B_BUSY) {
/*
* Command with busy response *CAN* also set the TC bit if they exit busy
*/
if ((read32(base_address + MMCHS_SD_STAT)
& MMCHS_SD_IE_TC_ENABLE_ENABLE) == 0) {
mmc_log_warn(&log, "TC should be raised\n");
}
write32(base_address + MMCHS_SD_STAT,
MMCHS_SD_IE_TC_ENABLE_CLEAR);
if (intr_wait(MMCHS_SD_STAT_CC | MMCHS_SD_IE_TC_ENABLE_CLEAR)) {
intr_assert(MMCHS_SD_STAT_CC);
mmc_log_warn(&log, "Failure waiting for clear\n");
return 1;
}
}
intr_assert(MMCHS_SD_STAT_CC);
return 0;
}
int
mmc_send_cmd(struct mmc_command *c)
{
/* convert the command to a hsmmc command */
int ret;
uint32_t cmd, arg;
cmd = MMCHS_SD_CMD_INDX_CMD(c->cmd);
arg = c->args;
switch (c->resp_type) {
case RESP_LEN_48_CHK_BUSY:
cmd |= MMCHS_SD_CMD_RSP_TYPE_48B_BUSY;
break;
case RESP_LEN_48:
cmd |= MMCHS_SD_CMD_RSP_TYPE_48B;
break;
case RESP_LEN_136:
cmd |= MMCHS_SD_CMD_RSP_TYPE_136B;
break;
case NO_RESPONSE:
cmd |= MMCHS_SD_CMD_RSP_TYPE_NO_RESP;
break;
default:
return 1;
}
ret = mmchs_send_cmd(cmd, arg);
/* copy response into cmd->resp */
switch (c->resp_type) {
case RESP_LEN_48_CHK_BUSY:
case RESP_LEN_48:
c->resp[0] = read32(base_address + MMCHS_SD_RSP10);
break;
case RESP_LEN_136:
c->resp[0] = read32(base_address + MMCHS_SD_RSP10);
c->resp[1] = read32(base_address + MMCHS_SD_RSP32);
c->resp[2] = read32(base_address + MMCHS_SD_RSP54);
c->resp[3] = read32(base_address + MMCHS_SD_RSP76);
break;
case NO_RESPONSE:
break;
default:
return 1;
}
return ret;
}
static struct mmc_command command;
int
card_goto_idle_state()
{
command.cmd = MMC_GO_IDLE_STATE;
command.resp_type = NO_RESPONSE;
command.args = 0x00;
if (mmc_send_cmd(&command)) {
// Failure
return 1;
}
return 0;
}
int
card_identification()
{
command.cmd = MMC_SEND_EXT_CSD;
command.resp_type = RESP_LEN_48;
command.args = MMCHS_SD_ARG_CMD8_VHS | MMCHS_SD_ARG_CMD8_CHECK_PATTERN;
if (mmc_send_cmd(&command)) {
// We currently only support 2.0,
return 1;
}
if (!(command.resp[0]
== (MMCHS_SD_ARG_CMD8_VHS | MMCHS_SD_ARG_CMD8_CHECK_PATTERN))) {
mmc_log_warn(&log, "%s, check pattern check failed %08x\n",
__FUNCTION__, command.resp[0]);
return 1;
}
return 0;
}
int
card_query_voltage_and_type(struct sd_card_regs *card)
{
spin_t spin;
command.cmd = MMC_APP_CMD;
command.resp_type = RESP_LEN_48;
command.args = MMC_ARG_RCA(0x0); /* RCA=0000 */
if (mmc_send_cmd(&command)) {
return 1;
}
command.cmd = SD_APP_OP_COND;
command.resp_type = RESP_LEN_48;
/* 0x1 << 30 == send HCS (Host capacity support) and get OCR register */
command.args =
MMC_OCR_3_3V_3_4V | MMC_OCR_3_2V_3_3V | MMC_OCR_3_1V_3_2V |
MMC_OCR_3_0V_3_1V | MMC_OCR_2_9V_3_0V | MMC_OCR_2_8V_2_9V |
MMC_OCR_2_7V_2_8V;
command.args |= MMC_OCR_HCS; /* RCA=0000 */
if (mmc_send_cmd(&command)) {
return 1;
}
/* @todo wait for max 1 ms */
spin_init(&spin, SANE_TIMEOUT);
while (!(command.resp[0] & MMC_OCR_MEM_READY)) {
command.cmd = MMC_APP_CMD;
command.resp_type = RESP_LEN_48;
command.args = MMC_ARG_RCA(0x0); /* RCA=0000 */
if (mmc_send_cmd(&command)) {
return 1;
}
/* Send ADMD41 */
/* 0x1 << 30 == send HCS (Host capacity support) and get OCR
* register */
command.cmd = SD_APP_OP_COND;
command.resp_type = RESP_LEN_48;
/* 0x1 << 30 == send HCS (Host capacity support) */
command.args = MMC_OCR_3_3V_3_4V | MMC_OCR_3_2V_3_3V
| MMC_OCR_3_1V_3_2V | MMC_OCR_3_0V_3_1V | MMC_OCR_2_9V_3_0V
| MMC_OCR_2_8V_2_9V | MMC_OCR_2_7V_2_8V;
command.args |= MMC_OCR_HCS; /* RCA=0000 */
if (mmc_send_cmd(&command)) {
return 1;
}
/* if bit 31 is set the response is valid */
if ((command.resp[0] & MMC_OCR_MEM_READY)) {
break;
}
if (spin_check(&spin) == FALSE) {
mmc_log_warn(&log,
"TIMEOUT waiting for the SD card\n");
}
}
card->ocr = command.resp[3];
return 0;
}
int
card_identify(struct sd_card_regs *card)
{
/* Send cmd 2 (all_send_cid) and expect 136 bits response */
command.cmd = MMC_ALL_SEND_CID;
command.resp_type = RESP_LEN_136;
command.args = MMC_ARG_RCA(0x0); /* RCA=0000 */
if (mmc_send_cmd(&command)) {
return 1;
}
card->cid[0] = command.resp[0];
card->cid[1] = command.resp[1];
card->cid[2] = command.resp[2];
card->cid[3] = command.resp[3];
command.cmd = MMC_SET_RELATIVE_ADDR;
command.resp_type = RESP_LEN_48;
command.args = 0x0; /* RCA=0000 */
/* R6 response */
if (mmc_send_cmd(&command)) {
return 1;
}
card->rca = SD_R6_RCA(command.resp);
/* MMHCS only supports a single card so sending MMCHS_SD_CMD_CMD2 is
* useless Still we should make it possible in the API to support
* multiple cards */
return 0;
}
int
card_csd(struct sd_card_regs *card)
{
/* send_csd -> r2 response */
command.cmd = MMC_SEND_CSD;
command.resp_type = RESP_LEN_136;
command.args = MMC_ARG_RCA(card->rca); /* card rca */
if (mmc_send_cmd(&command)) {
return 1;
}
card->csd[0] = command.resp[0];
card->csd[1] = command.resp[1];
card->csd[2] = command.resp[2];
card->csd[3] = command.resp[3];
if (SD_CSD_CSDVER(card->csd) != SD_CSD_CSDVER_2_0) {
mmc_log_warn(&log, "Version 2.0 of CSD register expected\n");
return 1;
}
/* sanity check */
// mmc_log_warn(&log,"size = %llu bytes\n", (long long
// unsigned)SD_CSD_V2_CAPACITY( card->csd) * 512);
return 0;
}
int
select_card(struct sd_card_regs *card)
{
command.cmd = MMC_SELECT_CARD;
command.resp_type = RESP_LEN_48_CHK_BUSY;
command.args = MMC_ARG_RCA(card->rca); /* card rca */
if (mmc_send_cmd(&command)) {
return 1;
}
return 0;
}
int
read_single_block(struct sd_card_regs *card,
uint32_t blknr, unsigned char *buf)
{
uint32_t count;
uint32_t value;
count = 0;
set32(base_address + MMCHS_SD_IE, MMCHS_SD_IE_BRR_ENABLE,
MMCHS_SD_IE_BRR_ENABLE_ENABLE);
set32(base_address + MMCHS_SD_BLK, MMCHS_SD_BLK_BLEN, 512);
/* read single block */
if (mmchs_send_cmd(MMCHS_SD_CMD_INDX_CMD(MMC_READ_BLOCK_SINGLE)
| MMCHS_SD_CMD_DP_DATA /* Command with data transfer */
| MMCHS_SD_CMD_RSP_TYPE_48B /* type (R1) */
| MMCHS_SD_CMD_MSBS_SINGLE /* single block */
| MMCHS_SD_CMD_DDIR_READ /* read data from card */
, blknr)) {
mmc_log_warn(&log, "Error sending command\n");
return 1;
}
if (intr_wait(MMCHS_SD_IE_BRR_ENABLE_ENABLE)) {
intr_assert(MMCHS_SD_IE_BRR_ENABLE_ENABLE);
mmc_log_warn(&log, "Timeout waiting for interrupt\n");
return 1;
}
if (!(read32(base_address + MMCHS_SD_PSTATE) & MMCHS_SD_PSTATE_BRE_EN)) {
mmc_log_warn(&log, "Problem BRE should be true\n");
return 1; /* We are not allowed to read data from the
* data buffer */
}
for (count = 0; count < 512; count += 4) {
value = read32(base_address + MMCHS_SD_DATA);
buf[count] = *((char *) &value);
buf[count + 1] = *((char *) &value + 1);
buf[count + 2] = *((char *) &value + 2);
buf[count + 3] = *((char *) &value + 3);
}
/* Wait for TC */
if (intr_wait(MMCHS_SD_IE_TC_ENABLE_ENABLE)) {
intr_assert(MMCHS_SD_IE_TC_ENABLE_ENABLE);
mmc_log_warn(&log, "Timeout waiting for interrupt\n");
return 1;
}
write32(base_address + MMCHS_SD_STAT, MMCHS_SD_IE_TC_ENABLE_CLEAR);
/* clear and disable the bbr interrupt */
write32(base_address + MMCHS_SD_STAT, MMCHS_SD_IE_BRR_ENABLE_CLEAR);
set32(base_address + MMCHS_SD_IE, MMCHS_SD_IE_BRR_ENABLE,
MMCHS_SD_IE_BRR_ENABLE_DISABLE);
return 0;
}
int
write_single_block(struct sd_card_regs *card,
uint32_t blknr, unsigned char *buf)
{
uint32_t count;
uint32_t value;
if ((read32(base_address + MMCHS_SD_STAT) & 0xffffu)) {
mmc_log_warn(&log, "%s, interrupt already raised stat %08x\n",
__FUNCTION__, read32(base_address + MMCHS_SD_STAT));
write32(base_address + MMCHS_SD_STAT,
MMCHS_SD_IE_CC_ENABLE_CLEAR);
// return 1;
}
set32(base_address + MMCHS_SD_IE, MMCHS_SD_IE_BWR_ENABLE,
MMCHS_SD_IE_BWR_ENABLE_ENABLE);
count = 0;
// set32(base_address + MMCHS_SD_IE, 0xfff , 0xfff);
set32(base_address + MMCHS_SD_BLK, MMCHS_SD_BLK_BLEN, 512);
/* write single block */
if (mmchs_send_cmd(MMCHS_SD_CMD_INDX_CMD(MMC_WRITE_BLOCK_SINGLE)
| MMCHS_SD_CMD_DP_DATA /* Command with data transfer */
| MMCHS_SD_CMD_RSP_TYPE_48B /* type (R1b) */
| MMCHS_SD_CMD_MSBS_SINGLE /* single block */
| MMCHS_SD_CMD_DDIR_WRITE /* write to the card */
, blknr)) {
mmc_log_warn(&log, "Write single block command failed\n");
mmc_log_trace(&log, "STAT=(0x%08x)\n",
read32(base_address + MMCHS_SD_STAT));
return 1;
}
/* Wait for the MMCHS_SD_IE_BWR_ENABLE interrupt */
if (intr_wait(MMCHS_SD_IE_BWR_ENABLE)) {
intr_assert(MMCHS_SD_IE_BWR_ENABLE);
mmc_log_warn(&log, "WFI failed\n");
return 1;
}
/* clear the interrupt directly */
intr_assert(MMCHS_SD_IE_BWR_ENABLE);
if (!(read32(base_address + MMCHS_SD_PSTATE) & MMCHS_SD_PSTATE_BWE_EN)) {
mmc_log_warn(&log,
"Error expected Buffer to be write enabled\n");
return 1; /* not ready to write data */
}
for (count = 0; count < 512; count += 4) {
while (!(read32(base_address + MMCHS_SD_PSTATE) & MMCHS_SD_PSTATE_BWE_EN)){
mmc_log_trace(&log, "Error expected Buffer to be write enabled(%d)\n", count);
}
*((char *) &value) = buf[count];
*((char *) &value + 1) = buf[count + 1];
*((char *) &value + 2) = buf[count + 2];
*((char *) &value + 3) = buf[count + 3];
write32(base_address + MMCHS_SD_DATA, value);
}
/* Wait for TC */
if (intr_wait(MMCHS_SD_IE_TC_ENABLE_CLEAR)) {
intr_assert(MMCHS_SD_IE_TC_ENABLE_CLEAR);
mmc_log_warn(&log, "(Write) Timeout waiting for transfer complete\n");
return 1;
}
intr_assert(MMCHS_SD_IE_TC_ENABLE_CLEAR);
set32(base_address + MMCHS_SD_IE, MMCHS_SD_IE_BWR_ENABLE,
MMCHS_SD_IE_BWR_ENABLE_DISABLE);
return 0;
}
int
mmchs_host_init(struct mmc_host *host)
{
mmchs_init(1);
return 0;
}
void
mmchs_set_log_level(int level)
{
if (level >= 0 && level <= 4) {
log.log_level = level;
}
}
int
mmchs_host_set_instance(struct mmc_host *host, int instance)
{
mmc_log_info(&log, "Using instance number %d\n", instance);
if (instance != 0) {
return EIO;
}
return OK;
}
int
mmchs_host_reset(struct mmc_host *host)
{
// mmchs_init(1);
return 0;
}
int
mmchs_card_detect(struct sd_slot *slot)
{
/* @TODO implement proper card detect */
return 1;
}
struct sd_card *
mmchs_card_initialize(struct sd_slot *slot)
{
// mmchs_init(1);
struct sd_card *card;
card = &slot->card;
memset(card, 0, sizeof(struct sd_card));
card->slot = slot;
if (card_goto_idle_state()) {
mmc_log_warn(&log, "Failed to go idle state\n");
return NULL;
}
if (card_identification()) {
mmc_log_warn(&log, "Failed to do card_identification\n");
return NULL;
}
if (card_query_voltage_and_type(&slot->card.regs)) {
mmc_log_warn(&log,
"Failed to do card_query_voltage_and_type\n");
return NULL;
}
if (card_identify(&slot->card.regs)) {
mmc_log_warn(&log, "Failed to identify card\n");
return NULL;
}
/* We have now initialized the hardware identified the card */
if (card_csd(&slot->card.regs)) {
mmc_log_warn(&log,
"failed to read csd (card specific data)\n");
return NULL;
}
if (select_card(&slot->card.regs)) {
mmc_log_warn(&log, "Failed to select card\n");
return NULL;
}
if (SD_CSD_READ_BL_LEN(slot->card.regs.csd) != 0x09) {
/* for CSD version 2.0 the value is fixed to 0x09 and means a
* block size of 512 */
mmc_log_warn(&log, "Block size expect to be 512\n");
return NULL;
}
slot->card.blk_size = 512; /* HARDCODED value */
slot->card.blk_count = SD_CSD_V2_CAPACITY(slot->card.regs.csd);
slot->card.state = SD_MODE_DATA_TRANSFER_MODE;
memset(slot->card.part, 0, sizeof(slot->card.part));
memset(slot->card.subpart, 0, sizeof(slot->card.subpart));
slot->card.part[0].dv_base = 0;
slot->card.part[0].dv_size =
(unsigned long long) SD_CSD_V2_CAPACITY(slot->card.regs.csd) * 512;
return &slot->card;
}
/* read count blocks into existing buf */
static int
mmchs_host_read(struct sd_card *card,
uint32_t blknr, uint32_t count, unsigned char *buf)
{
uint32_t i;
i = count;
for (i = 0; i < count; i++) {
read_single_block(&card->regs, blknr + i,
buf + (i * card->blk_size));
}
return OK;
}
/* write count blocks */
static int
mmchs_host_write(struct sd_card *card,
uint32_t blknr, uint32_t count, unsigned char *buf)
{
uint32_t i;
i = count;
for (i = 0; i < count; i++) {
write_single_block(&card->regs, blknr + i,
buf + (i * card->blk_size));
}
return OK;
}
int
mmchs_card_release(struct sd_card *card)
{
assert(card->open_ct == 1);
card->open_ct--;
card->state = SD_MODE_UNINITIALIZED;
/* TODO:Set card state */
return OK;
}
void
host_initialize_host_structure_mmchs(struct mmc_host *host)
{
/* Initialize the basic data structures host slots and cards */
int i;
host->host_set_instance = mmchs_host_set_instance;
host->host_init = mmchs_host_init;
host->set_log_level = mmchs_set_log_level;
host->host_reset = mmchs_host_reset;
host->card_detect = mmchs_card_detect;
host->card_initialize = mmchs_card_initialize;
host->card_release = mmchs_card_release;
host->hw_intr = mmchs_hw_intr;
host->read = mmchs_host_read;
host->write = mmchs_host_write;
/* initialize data structures */
for (i = 0; i < sizeof(host->slot) / sizeof(host->slot[0]); i++) {
// @TODO set initial card and slot state
host->slot[i].host = host;
host->slot[i].card.slot = &host->slot[i];
}
}