minix/kernel/proc.c

792 lines
30 KiB
C
Raw Normal View History

2005-04-21 16:53:53 +02:00
/* This file contains essentially all of the process and message handling.
* Together with "mpx.s" it forms the lowest layer of the MINIX kernel.
* There is one entry point from the outside:
2005-04-21 16:53:53 +02:00
*
2005-08-29 18:47:18 +02:00
* sys_call: a system call, i.e., the kernel is trapped with an INT
2005-04-21 16:53:53 +02:00
*
* As well as several entry points used from the interrupt and task level:
2005-04-21 16:53:53 +02:00
*
* lock_notify: notify a process of a system event
* lock_send: send a message to a process
* lock_enqueue: put a process on one of the scheduling queues
* lock_dequeue: remove a process from the scheduling queues
2005-04-21 16:53:53 +02:00
*
* Changes:
* Aug 19, 2005 rewrote scheduling code (Jorrit N. Herder)
* Jul 25, 2005 rewrote system call handling (Jorrit N. Herder)
* May 26, 2005 rewrote message passing functions (Jorrit N. Herder)
* May 24, 2005 new notification system call (Jorrit N. Herder)
* Oct 28, 2004 nonblocking send and receive calls (Jorrit N. Herder)
*
* The code here is critical to make everything work and is important for the
* overall performance of the system. A large fraction of the code deals with
* list manipulation. To make this both easy to understand and fast to execute
* pointer pointers are used throughout the code. Pointer pointers prevent
* exceptions for the head or tail of a linked list.
*
* node_t *queue, *new_node; // assume these as global variables
* node_t **xpp = &queue; // get pointer pointer to head of queue
* while (*xpp != NULL) // find last pointer of the linked list
* xpp = &(*xpp)->next; // get pointer to next pointer
* *xpp = new_node; // now replace the end (the NULL pointer)
* new_node->next = NULL; // and mark the new end of the list
*
* For example, when adding a new node to the end of the list, one normally
* makes an exception for an empty list and looks up the end of the list for
* nonempty lists. As shown above, this is not required with pointer pointers.
2005-04-21 16:53:53 +02:00
*/
#include <minix/com.h>
#include <minix/callnr.h>
'proc number' is process slot, 'endpoint' are generation-aware process instance numbers, encoded and decoded using macros in <minix/endpoint.h>. proc number -> endpoint migration . proc_nr in the interrupt hook is now an endpoint, proc_nr_e. . m_source for messages and notifies is now an endpoint, instead of proc number. . isokendpt() converts an endpoint to a process number, returns success (but fails if the process number is out of range, the process slot is not a living process, or the given endpoint number does not match the endpoint number in the process slot, indicating an old process). . okendpt() is the same as isokendpt(), but panic()s if the conversion fails. This is mainly used for decoding message.m_source endpoints, and other endpoint numbers in kernel data structures, which should always be correct. . if DEBUG_ENABLE_IPC_WARNINGS is enabled, isokendpt() and okendpt() get passed the __FILE__ and __LINE__ of the calling lines, and print messages about what is wrong with the endpoint number (out of range proc, empty proc, or inconsistent endpoint number), with the caller, making finding where the conversion failed easy without having to include code for every call to print where things went wrong. Sometimes this is harmless (wrong arg to a kernel call), sometimes it's a fatal internal inconsistency (bogus m_source). . some process table fields have been appended an _e to indicate it's become and endpoint. . process endpoint is stored in p_endpoint, without generation number. it turns out the kernel never needs the generation number, except when fork()ing, so it's decoded then. . kernel calls all take endpoints as arguments, not proc numbers. the one exception is sys_fork(), which needs to know in which slot to put the child.
2006-03-03 11:00:02 +01:00
#include <minix/endpoint.h>
#include "debug.h"
#include "kernel.h"
2005-04-21 16:53:53 +02:00
#include "proc.h"
#include <signal.h>
2005-04-21 16:53:53 +02:00
/* Scheduling and message passing functions. The functions are available to
* other parts of the kernel through lock_...(). The lock temporarily disables
* interrupts to prevent race conditions.
*/
'proc number' is process slot, 'endpoint' are generation-aware process instance numbers, encoded and decoded using macros in <minix/endpoint.h>. proc number -> endpoint migration . proc_nr in the interrupt hook is now an endpoint, proc_nr_e. . m_source for messages and notifies is now an endpoint, instead of proc number. . isokendpt() converts an endpoint to a process number, returns success (but fails if the process number is out of range, the process slot is not a living process, or the given endpoint number does not match the endpoint number in the process slot, indicating an old process). . okendpt() is the same as isokendpt(), but panic()s if the conversion fails. This is mainly used for decoding message.m_source endpoints, and other endpoint numbers in kernel data structures, which should always be correct. . if DEBUG_ENABLE_IPC_WARNINGS is enabled, isokendpt() and okendpt() get passed the __FILE__ and __LINE__ of the calling lines, and print messages about what is wrong with the endpoint number (out of range proc, empty proc, or inconsistent endpoint number), with the caller, making finding where the conversion failed easy without having to include code for every call to print where things went wrong. Sometimes this is harmless (wrong arg to a kernel call), sometimes it's a fatal internal inconsistency (bogus m_source). . some process table fields have been appended an _e to indicate it's become and endpoint. . process endpoint is stored in p_endpoint, without generation number. it turns out the kernel never needs the generation number, except when fork()ing, so it's decoded then. . kernel calls all take endpoints as arguments, not proc numbers. the one exception is sys_fork(), which needs to know in which slot to put the child.
2006-03-03 11:00:02 +01:00
FORWARD _PROTOTYPE( int mini_send, (struct proc *caller_ptr, int dst_e,
message *m_ptr, unsigned flags));
FORWARD _PROTOTYPE( int mini_receive, (struct proc *caller_ptr, int src,
message *m_ptr, unsigned flags));
FORWARD _PROTOTYPE( int mini_notify, (struct proc *caller_ptr, int dst));
FORWARD _PROTOTYPE( int deadlock, (int function,
register struct proc *caller, int src_dst));
FORWARD _PROTOTYPE( void enqueue, (struct proc *rp));
FORWARD _PROTOTYPE( void dequeue, (struct proc *rp));
FORWARD _PROTOTYPE( void sched, (struct proc *rp, int *queue, int *front));
FORWARD _PROTOTYPE( void pick_proc, (void));
#define BuildMess(m_ptr, src, dst_ptr) \
'proc number' is process slot, 'endpoint' are generation-aware process instance numbers, encoded and decoded using macros in <minix/endpoint.h>. proc number -> endpoint migration . proc_nr in the interrupt hook is now an endpoint, proc_nr_e. . m_source for messages and notifies is now an endpoint, instead of proc number. . isokendpt() converts an endpoint to a process number, returns success (but fails if the process number is out of range, the process slot is not a living process, or the given endpoint number does not match the endpoint number in the process slot, indicating an old process). . okendpt() is the same as isokendpt(), but panic()s if the conversion fails. This is mainly used for decoding message.m_source endpoints, and other endpoint numbers in kernel data structures, which should always be correct. . if DEBUG_ENABLE_IPC_WARNINGS is enabled, isokendpt() and okendpt() get passed the __FILE__ and __LINE__ of the calling lines, and print messages about what is wrong with the endpoint number (out of range proc, empty proc, or inconsistent endpoint number), with the caller, making finding where the conversion failed easy without having to include code for every call to print where things went wrong. Sometimes this is harmless (wrong arg to a kernel call), sometimes it's a fatal internal inconsistency (bogus m_source). . some process table fields have been appended an _e to indicate it's become and endpoint. . process endpoint is stored in p_endpoint, without generation number. it turns out the kernel never needs the generation number, except when fork()ing, so it's decoded then. . kernel calls all take endpoints as arguments, not proc numbers. the one exception is sys_fork(), which needs to know in which slot to put the child.
2006-03-03 11:00:02 +01:00
(m_ptr)->m_source = proc_addr(src)->p_endpoint; \
(m_ptr)->m_type = NOTIFY_FROM(src); \
(m_ptr)->NOTIFY_TIMESTAMP = get_uptime(); \
switch (src) { \
case HARDWARE: \
(m_ptr)->NOTIFY_ARG = priv(dst_ptr)->s_int_pending; \
priv(dst_ptr)->s_int_pending = 0; \
break; \
case SYSTEM: \
(m_ptr)->NOTIFY_ARG = priv(dst_ptr)->s_sig_pending; \
priv(dst_ptr)->s_sig_pending = 0; \
break; \
}
2005-04-21 16:53:53 +02:00
#if (CHIP == INTEL)
#define CopyMess(s,sp,sm,dp,dm) \
'proc number' is process slot, 'endpoint' are generation-aware process instance numbers, encoded and decoded using macros in <minix/endpoint.h>. proc number -> endpoint migration . proc_nr in the interrupt hook is now an endpoint, proc_nr_e. . m_source for messages and notifies is now an endpoint, instead of proc number. . isokendpt() converts an endpoint to a process number, returns success (but fails if the process number is out of range, the process slot is not a living process, or the given endpoint number does not match the endpoint number in the process slot, indicating an old process). . okendpt() is the same as isokendpt(), but panic()s if the conversion fails. This is mainly used for decoding message.m_source endpoints, and other endpoint numbers in kernel data structures, which should always be correct. . if DEBUG_ENABLE_IPC_WARNINGS is enabled, isokendpt() and okendpt() get passed the __FILE__ and __LINE__ of the calling lines, and print messages about what is wrong with the endpoint number (out of range proc, empty proc, or inconsistent endpoint number), with the caller, making finding where the conversion failed easy without having to include code for every call to print where things went wrong. Sometimes this is harmless (wrong arg to a kernel call), sometimes it's a fatal internal inconsistency (bogus m_source). . some process table fields have been appended an _e to indicate it's become and endpoint. . process endpoint is stored in p_endpoint, without generation number. it turns out the kernel never needs the generation number, except when fork()ing, so it's decoded then. . kernel calls all take endpoints as arguments, not proc numbers. the one exception is sys_fork(), which needs to know in which slot to put the child.
2006-03-03 11:00:02 +01:00
cp_mess(proc_addr(s)->p_endpoint, \
(sp)->p_memmap[D].mem_phys, \
(vir_bytes)sm, (dp)->p_memmap[D].mem_phys, (vir_bytes)dm)
2005-04-21 16:53:53 +02:00
#endif /* (CHIP == INTEL) */
#if (CHIP == M68000)
/* M68000 does not have cp_mess() in assembly like INTEL. Declare prototype
* for cp_mess() here and define the function below. Also define CopyMess.
*/
#endif /* (CHIP == M68000) */
/*===========================================================================*
* sys_call *
*===========================================================================*/
2006-03-10 17:10:05 +01:00
PUBLIC int sys_call(call_nr, src_dst_e, m_ptr, bit_map)
int call_nr; /* system call number and flags */
'proc number' is process slot, 'endpoint' are generation-aware process instance numbers, encoded and decoded using macros in <minix/endpoint.h>. proc number -> endpoint migration . proc_nr in the interrupt hook is now an endpoint, proc_nr_e. . m_source for messages and notifies is now an endpoint, instead of proc number. . isokendpt() converts an endpoint to a process number, returns success (but fails if the process number is out of range, the process slot is not a living process, or the given endpoint number does not match the endpoint number in the process slot, indicating an old process). . okendpt() is the same as isokendpt(), but panic()s if the conversion fails. This is mainly used for decoding message.m_source endpoints, and other endpoint numbers in kernel data structures, which should always be correct. . if DEBUG_ENABLE_IPC_WARNINGS is enabled, isokendpt() and okendpt() get passed the __FILE__ and __LINE__ of the calling lines, and print messages about what is wrong with the endpoint number (out of range proc, empty proc, or inconsistent endpoint number), with the caller, making finding where the conversion failed easy without having to include code for every call to print where things went wrong. Sometimes this is harmless (wrong arg to a kernel call), sometimes it's a fatal internal inconsistency (bogus m_source). . some process table fields have been appended an _e to indicate it's become and endpoint. . process endpoint is stored in p_endpoint, without generation number. it turns out the kernel never needs the generation number, except when fork()ing, so it's decoded then. . kernel calls all take endpoints as arguments, not proc numbers. the one exception is sys_fork(), which needs to know in which slot to put the child.
2006-03-03 11:00:02 +01:00
int src_dst_e; /* src to receive from or dst to send to */
2005-04-21 16:53:53 +02:00
message *m_ptr; /* pointer to message in the caller's space */
2006-03-10 17:10:05 +01:00
long bit_map; /* notification event set or flags */
2005-04-21 16:53:53 +02:00
{
/* System calls are done by trapping to the kernel with an INT instruction.
* The trap is caught and sys_call() is called to send or receive a message
* (or both). The caller is always given by 'proc_ptr'.
*/
register struct proc *caller_ptr = proc_ptr; /* get pointer to caller */
int function = call_nr & SYSCALL_FUNC; /* get system call function */
unsigned flags = call_nr & SYSCALL_FLAGS; /* get flags */
2005-04-21 16:53:53 +02:00
int mask_entry; /* bit to check in send mask */
int group_size; /* used for deadlock check */
2005-04-21 16:53:53 +02:00
int result; /* the system call's result */
'proc number' is process slot, 'endpoint' are generation-aware process instance numbers, encoded and decoded using macros in <minix/endpoint.h>. proc number -> endpoint migration . proc_nr in the interrupt hook is now an endpoint, proc_nr_e. . m_source for messages and notifies is now an endpoint, instead of proc number. . isokendpt() converts an endpoint to a process number, returns success (but fails if the process number is out of range, the process slot is not a living process, or the given endpoint number does not match the endpoint number in the process slot, indicating an old process). . okendpt() is the same as isokendpt(), but panic()s if the conversion fails. This is mainly used for decoding message.m_source endpoints, and other endpoint numbers in kernel data structures, which should always be correct. . if DEBUG_ENABLE_IPC_WARNINGS is enabled, isokendpt() and okendpt() get passed the __FILE__ and __LINE__ of the calling lines, and print messages about what is wrong with the endpoint number (out of range proc, empty proc, or inconsistent endpoint number), with the caller, making finding where the conversion failed easy without having to include code for every call to print where things went wrong. Sometimes this is harmless (wrong arg to a kernel call), sometimes it's a fatal internal inconsistency (bogus m_source). . some process table fields have been appended an _e to indicate it's become and endpoint. . process endpoint is stored in p_endpoint, without generation number. it turns out the kernel never needs the generation number, except when fork()ing, so it's decoded then. . kernel calls all take endpoints as arguments, not proc numbers. the one exception is sys_fork(), which needs to know in which slot to put the child.
2006-03-03 11:00:02 +01:00
int src_dst;
vir_clicks vlo, vhi; /* virtual clicks containing message to send */
2006-03-08 13:06:33 +01:00
#if 0
if (caller_ptr->p_rts_flags & SLOT_FREE)
{
kprintf("called by the dead?!?\n");
return EINVAL;
}
2006-03-08 13:30:43 +01:00
#endif
'proc number' is process slot, 'endpoint' are generation-aware process instance numbers, encoded and decoded using macros in <minix/endpoint.h>. proc number -> endpoint migration . proc_nr in the interrupt hook is now an endpoint, proc_nr_e. . m_source for messages and notifies is now an endpoint, instead of proc number. . isokendpt() converts an endpoint to a process number, returns success (but fails if the process number is out of range, the process slot is not a living process, or the given endpoint number does not match the endpoint number in the process slot, indicating an old process). . okendpt() is the same as isokendpt(), but panic()s if the conversion fails. This is mainly used for decoding message.m_source endpoints, and other endpoint numbers in kernel data structures, which should always be correct. . if DEBUG_ENABLE_IPC_WARNINGS is enabled, isokendpt() and okendpt() get passed the __FILE__ and __LINE__ of the calling lines, and print messages about what is wrong with the endpoint number (out of range proc, empty proc, or inconsistent endpoint number), with the caller, making finding where the conversion failed easy without having to include code for every call to print where things went wrong. Sometimes this is harmless (wrong arg to a kernel call), sometimes it's a fatal internal inconsistency (bogus m_source). . some process table fields have been appended an _e to indicate it's become and endpoint. . process endpoint is stored in p_endpoint, without generation number. it turns out the kernel never needs the generation number, except when fork()ing, so it's decoded then. . kernel calls all take endpoints as arguments, not proc numbers. the one exception is sys_fork(), which needs to know in which slot to put the child.
2006-03-03 11:00:02 +01:00
/* Require a valid source and/ or destination process, unless echoing. */
if (src_dst_e != ANY && function != ECHO) {
if(!isokendpt(src_dst_e, &src_dst)) {
#if DEBUG_ENABLE_IPC_WARNINGS
kprintf("sys_call: trap %d by %d with bad endpoint %d\n",
function, proc_nr(caller_ptr), src_dst_e);
#endif
return EDEADSRCDST;
}
} else src_dst = src_dst_e;
2005-04-21 16:53:53 +02:00
/* Check if the process has privileges for the requested call. Calls to the
* kernel may only be SENDREC, because tasks always reply and may not block
* if the caller doesn't do receive().
2005-04-21 16:53:53 +02:00
*/
if (! (priv(caller_ptr)->s_trap_mask & (1 << function)) ||
2005-08-29 18:47:18 +02:00
(iskerneln(src_dst) && function != SENDREC
'proc number' is process slot, 'endpoint' are generation-aware process instance numbers, encoded and decoded using macros in <minix/endpoint.h>. proc number -> endpoint migration . proc_nr in the interrupt hook is now an endpoint, proc_nr_e. . m_source for messages and notifies is now an endpoint, instead of proc number. . isokendpt() converts an endpoint to a process number, returns success (but fails if the process number is out of range, the process slot is not a living process, or the given endpoint number does not match the endpoint number in the process slot, indicating an old process). . okendpt() is the same as isokendpt(), but panic()s if the conversion fails. This is mainly used for decoding message.m_source endpoints, and other endpoint numbers in kernel data structures, which should always be correct. . if DEBUG_ENABLE_IPC_WARNINGS is enabled, isokendpt() and okendpt() get passed the __FILE__ and __LINE__ of the calling lines, and print messages about what is wrong with the endpoint number (out of range proc, empty proc, or inconsistent endpoint number), with the caller, making finding where the conversion failed easy without having to include code for every call to print where things went wrong. Sometimes this is harmless (wrong arg to a kernel call), sometimes it's a fatal internal inconsistency (bogus m_source). . some process table fields have been appended an _e to indicate it's become and endpoint. . process endpoint is stored in p_endpoint, without generation number. it turns out the kernel never needs the generation number, except when fork()ing, so it's decoded then. . kernel calls all take endpoints as arguments, not proc numbers. the one exception is sys_fork(), which needs to know in which slot to put the child.
2006-03-03 11:00:02 +01:00
&& function != RECEIVE)) {
#if DEBUG_ENABLE_IPC_WARNINGS
2005-08-10 11:51:29 +02:00
kprintf("sys_call: trap %d not allowed, caller %d, src_dst %d\n",
function, proc_nr(caller_ptr), src_dst);
#endif
return(ETRAPDENIED); /* trap denied by mask or kernel */
}
/* If the call involves a message buffer, i.e., for SEND, RECEIVE, SENDREC,
* or ECHO, check the message pointer. This check allows a message to be
* anywhere in data or stack or gap. It will have to be made more elaborate
* for machines which don't have the gap mapped.
*/
if (function & CHECK_PTR) {
vlo = (vir_bytes) m_ptr >> CLICK_SHIFT;
vhi = ((vir_bytes) m_ptr + MESS_SIZE - 1) >> CLICK_SHIFT;
if (vlo < caller_ptr->p_memmap[D].mem_vir || vlo > vhi ||
vhi >= caller_ptr->p_memmap[S].mem_vir +
caller_ptr->p_memmap[S].mem_len) {
#if DEBUG_ENABLE_IPC_WARNINGS
2005-08-10 11:51:29 +02:00
kprintf("sys_call: invalid message pointer, trap %d, caller %d\n",
function, proc_nr(caller_ptr));
#endif
return(EFAULT); /* invalid message pointer */
}
}
/* If the call is to send to a process, i.e., for SEND, SENDREC or NOTIFY,
* verify that the caller is allowed to send to the given destination.
*/
if (function & CHECK_DST) {
if (! get_sys_bit(priv(caller_ptr)->s_ipc_to, nr_to_id(src_dst))) {
#if DEBUG_ENABLE_IPC_WARNINGS
kprintf("sys_call: ipc mask denied trap %d from %d to %d\n",
function, proc_nr(caller_ptr), src_dst);
#endif
return(ECALLDENIED); /* call denied by ipc mask */
}
}
2005-04-21 16:53:53 +02:00
/* Check for a possible deadlock for blocking SEND(REC) and RECEIVE. */
if (function & CHECK_DEADLOCK) {
if (group_size = deadlock(function, caller_ptr, src_dst)) {
#if DEBUG_ENABLE_IPC_WARNINGS
kprintf("sys_call: trap %d from %d to %d deadlocked, group size %d\n",
function, proc_nr(caller_ptr), src_dst, group_size);
#endif
return(ELOCKED);
}
}
2005-04-21 16:53:53 +02:00
/* Now check if the call is known and try to perform the request. The only
* system calls that exist in MINIX are sending and receiving messages.
* - SENDREC: combines SEND and RECEIVE in a single system call
* - SEND: sender blocks until its message has been delivered
* - RECEIVE: receiver blocks until an acceptable message has arrived
* - NOTIFY: nonblocking call; deliver notification or mark pending
* - ECHO: nonblocking call; directly echo back the message
2005-04-21 16:53:53 +02:00
*/
switch(function) {
case SENDREC:
/* A flag is set so that notifications cannot interrupt SENDREC. */
2006-03-10 17:10:05 +01:00
caller_ptr->p_misc_flags |= REPLY_PENDING;
/* fall through */
case SEND:
'proc number' is process slot, 'endpoint' are generation-aware process instance numbers, encoded and decoded using macros in <minix/endpoint.h>. proc number -> endpoint migration . proc_nr in the interrupt hook is now an endpoint, proc_nr_e. . m_source for messages and notifies is now an endpoint, instead of proc number. . isokendpt() converts an endpoint to a process number, returns success (but fails if the process number is out of range, the process slot is not a living process, or the given endpoint number does not match the endpoint number in the process slot, indicating an old process). . okendpt() is the same as isokendpt(), but panic()s if the conversion fails. This is mainly used for decoding message.m_source endpoints, and other endpoint numbers in kernel data structures, which should always be correct. . if DEBUG_ENABLE_IPC_WARNINGS is enabled, isokendpt() and okendpt() get passed the __FILE__ and __LINE__ of the calling lines, and print messages about what is wrong with the endpoint number (out of range proc, empty proc, or inconsistent endpoint number), with the caller, making finding where the conversion failed easy without having to include code for every call to print where things went wrong. Sometimes this is harmless (wrong arg to a kernel call), sometimes it's a fatal internal inconsistency (bogus m_source). . some process table fields have been appended an _e to indicate it's become and endpoint. . process endpoint is stored in p_endpoint, without generation number. it turns out the kernel never needs the generation number, except when fork()ing, so it's decoded then. . kernel calls all take endpoints as arguments, not proc numbers. the one exception is sys_fork(), which needs to know in which slot to put the child.
2006-03-03 11:00:02 +01:00
result = mini_send(caller_ptr, src_dst_e, m_ptr, flags);
if (function == SEND || result != OK) {
break; /* done, or SEND failed */
} /* fall through for SENDREC */
case RECEIVE:
if (function == RECEIVE)
2006-03-10 17:10:05 +01:00
caller_ptr->p_misc_flags &= ~REPLY_PENDING;
'proc number' is process slot, 'endpoint' are generation-aware process instance numbers, encoded and decoded using macros in <minix/endpoint.h>. proc number -> endpoint migration . proc_nr in the interrupt hook is now an endpoint, proc_nr_e. . m_source for messages and notifies is now an endpoint, instead of proc number. . isokendpt() converts an endpoint to a process number, returns success (but fails if the process number is out of range, the process slot is not a living process, or the given endpoint number does not match the endpoint number in the process slot, indicating an old process). . okendpt() is the same as isokendpt(), but panic()s if the conversion fails. This is mainly used for decoding message.m_source endpoints, and other endpoint numbers in kernel data structures, which should always be correct. . if DEBUG_ENABLE_IPC_WARNINGS is enabled, isokendpt() and okendpt() get passed the __FILE__ and __LINE__ of the calling lines, and print messages about what is wrong with the endpoint number (out of range proc, empty proc, or inconsistent endpoint number), with the caller, making finding where the conversion failed easy without having to include code for every call to print where things went wrong. Sometimes this is harmless (wrong arg to a kernel call), sometimes it's a fatal internal inconsistency (bogus m_source). . some process table fields have been appended an _e to indicate it's become and endpoint. . process endpoint is stored in p_endpoint, without generation number. it turns out the kernel never needs the generation number, except when fork()ing, so it's decoded then. . kernel calls all take endpoints as arguments, not proc numbers. the one exception is sys_fork(), which needs to know in which slot to put the child.
2006-03-03 11:00:02 +01:00
result = mini_receive(caller_ptr, src_dst_e, m_ptr, flags);
break;
case NOTIFY:
result = mini_notify(caller_ptr, src_dst);
break;
case ECHO:
CopyMess(caller_ptr->p_nr, caller_ptr, m_ptr, caller_ptr, m_ptr);
result = OK;
break;
default:
result = EBADCALL; /* illegal system call */
2005-04-21 16:53:53 +02:00
}
/* Now, return the result of the system call to the caller. */
return(result);
}
/*===========================================================================*
* deadlock *
*===========================================================================*/
PRIVATE int deadlock(function, cp, src_dst)
int function; /* trap number */
register struct proc *cp; /* pointer to caller */
'proc number' is process slot, 'endpoint' are generation-aware process instance numbers, encoded and decoded using macros in <minix/endpoint.h>. proc number -> endpoint migration . proc_nr in the interrupt hook is now an endpoint, proc_nr_e. . m_source for messages and notifies is now an endpoint, instead of proc number. . isokendpt() converts an endpoint to a process number, returns success (but fails if the process number is out of range, the process slot is not a living process, or the given endpoint number does not match the endpoint number in the process slot, indicating an old process). . okendpt() is the same as isokendpt(), but panic()s if the conversion fails. This is mainly used for decoding message.m_source endpoints, and other endpoint numbers in kernel data structures, which should always be correct. . if DEBUG_ENABLE_IPC_WARNINGS is enabled, isokendpt() and okendpt() get passed the __FILE__ and __LINE__ of the calling lines, and print messages about what is wrong with the endpoint number (out of range proc, empty proc, or inconsistent endpoint number), with the caller, making finding where the conversion failed easy without having to include code for every call to print where things went wrong. Sometimes this is harmless (wrong arg to a kernel call), sometimes it's a fatal internal inconsistency (bogus m_source). . some process table fields have been appended an _e to indicate it's become and endpoint. . process endpoint is stored in p_endpoint, without generation number. it turns out the kernel never needs the generation number, except when fork()ing, so it's decoded then. . kernel calls all take endpoints as arguments, not proc numbers. the one exception is sys_fork(), which needs to know in which slot to put the child.
2006-03-03 11:00:02 +01:00
int src_dst; /* src or dst process */
{
/* Check for deadlock. This can happen if 'caller_ptr' and 'src_dst' have
* a cyclic dependency of blocking send and receive calls. The only cyclic
* depency that is not fatal is if the caller and target directly SEND(REC)
* and RECEIVE to each other. If a deadlock is found, the group size is
* returned. Otherwise zero is returned.
*/
register struct proc *xp; /* process pointer */
int group_size = 1; /* start with only caller */
int trap_flags;
while (src_dst != ANY) { /* check while process nr */
'proc number' is process slot, 'endpoint' are generation-aware process instance numbers, encoded and decoded using macros in <minix/endpoint.h>. proc number -> endpoint migration . proc_nr in the interrupt hook is now an endpoint, proc_nr_e. . m_source for messages and notifies is now an endpoint, instead of proc number. . isokendpt() converts an endpoint to a process number, returns success (but fails if the process number is out of range, the process slot is not a living process, or the given endpoint number does not match the endpoint number in the process slot, indicating an old process). . okendpt() is the same as isokendpt(), but panic()s if the conversion fails. This is mainly used for decoding message.m_source endpoints, and other endpoint numbers in kernel data structures, which should always be correct. . if DEBUG_ENABLE_IPC_WARNINGS is enabled, isokendpt() and okendpt() get passed the __FILE__ and __LINE__ of the calling lines, and print messages about what is wrong with the endpoint number (out of range proc, empty proc, or inconsistent endpoint number), with the caller, making finding where the conversion failed easy without having to include code for every call to print where things went wrong. Sometimes this is harmless (wrong arg to a kernel call), sometimes it's a fatal internal inconsistency (bogus m_source). . some process table fields have been appended an _e to indicate it's become and endpoint. . process endpoint is stored in p_endpoint, without generation number. it turns out the kernel never needs the generation number, except when fork()ing, so it's decoded then. . kernel calls all take endpoints as arguments, not proc numbers. the one exception is sys_fork(), which needs to know in which slot to put the child.
2006-03-03 11:00:02 +01:00
int src_dst_e;
xp = proc_addr(src_dst); /* follow chain of processes */
group_size ++; /* extra process in group */
2006-03-09 14:59:59 +01:00
/* Check whether the last process in the chain has a dependency. If it
* has not, the cycle cannot be closed and we are done.
*/
if (xp->p_rts_flags & RECEIVING) { /* xp has dependency */
'proc number' is process slot, 'endpoint' are generation-aware process instance numbers, encoded and decoded using macros in <minix/endpoint.h>. proc number -> endpoint migration . proc_nr in the interrupt hook is now an endpoint, proc_nr_e. . m_source for messages and notifies is now an endpoint, instead of proc number. . isokendpt() converts an endpoint to a process number, returns success (but fails if the process number is out of range, the process slot is not a living process, or the given endpoint number does not match the endpoint number in the process slot, indicating an old process). . okendpt() is the same as isokendpt(), but panic()s if the conversion fails. This is mainly used for decoding message.m_source endpoints, and other endpoint numbers in kernel data structures, which should always be correct. . if DEBUG_ENABLE_IPC_WARNINGS is enabled, isokendpt() and okendpt() get passed the __FILE__ and __LINE__ of the calling lines, and print messages about what is wrong with the endpoint number (out of range proc, empty proc, or inconsistent endpoint number), with the caller, making finding where the conversion failed easy without having to include code for every call to print where things went wrong. Sometimes this is harmless (wrong arg to a kernel call), sometimes it's a fatal internal inconsistency (bogus m_source). . some process table fields have been appended an _e to indicate it's become and endpoint. . process endpoint is stored in p_endpoint, without generation number. it turns out the kernel never needs the generation number, except when fork()ing, so it's decoded then. . kernel calls all take endpoints as arguments, not proc numbers. the one exception is sys_fork(), which needs to know in which slot to put the child.
2006-03-03 11:00:02 +01:00
if(xp->p_getfrom_e == ANY) src_dst = ANY;
else okendpt(xp->p_getfrom_e, &src_dst);
} else if (xp->p_rts_flags & SENDING) { /* xp has dependency */
'proc number' is process slot, 'endpoint' are generation-aware process instance numbers, encoded and decoded using macros in <minix/endpoint.h>. proc number -> endpoint migration . proc_nr in the interrupt hook is now an endpoint, proc_nr_e. . m_source for messages and notifies is now an endpoint, instead of proc number. . isokendpt() converts an endpoint to a process number, returns success (but fails if the process number is out of range, the process slot is not a living process, or the given endpoint number does not match the endpoint number in the process slot, indicating an old process). . okendpt() is the same as isokendpt(), but panic()s if the conversion fails. This is mainly used for decoding message.m_source endpoints, and other endpoint numbers in kernel data structures, which should always be correct. . if DEBUG_ENABLE_IPC_WARNINGS is enabled, isokendpt() and okendpt() get passed the __FILE__ and __LINE__ of the calling lines, and print messages about what is wrong with the endpoint number (out of range proc, empty proc, or inconsistent endpoint number), with the caller, making finding where the conversion failed easy without having to include code for every call to print where things went wrong. Sometimes this is harmless (wrong arg to a kernel call), sometimes it's a fatal internal inconsistency (bogus m_source). . some process table fields have been appended an _e to indicate it's become and endpoint. . process endpoint is stored in p_endpoint, without generation number. it turns out the kernel never needs the generation number, except when fork()ing, so it's decoded then. . kernel calls all take endpoints as arguments, not proc numbers. the one exception is sys_fork(), which needs to know in which slot to put the child.
2006-03-03 11:00:02 +01:00
okendpt(xp->p_sendto_e, &src_dst);
} else {
return(0); /* not a deadlock */
}
/* Now check if there is a cyclic dependency. For group sizes of two,
* a combination of SEND(REC) and RECEIVE is not fatal. Larger groups
* or other combinations indicate a deadlock.
*/
if (src_dst == proc_nr(cp)) { /* possible deadlock */
if (group_size == 2) { /* caller and src_dst */
/* The function number is magically converted to flags. */
if ((xp->p_rts_flags ^ (function << 2)) & SENDING) {
return(0); /* not a deadlock */
}
}
return(group_size); /* deadlock found */
}
}
return(0); /* not a deadlock */
}
2005-04-21 16:53:53 +02:00
/*===========================================================================*
* mini_send *
*===========================================================================*/
'proc number' is process slot, 'endpoint' are generation-aware process instance numbers, encoded and decoded using macros in <minix/endpoint.h>. proc number -> endpoint migration . proc_nr in the interrupt hook is now an endpoint, proc_nr_e. . m_source for messages and notifies is now an endpoint, instead of proc number. . isokendpt() converts an endpoint to a process number, returns success (but fails if the process number is out of range, the process slot is not a living process, or the given endpoint number does not match the endpoint number in the process slot, indicating an old process). . okendpt() is the same as isokendpt(), but panic()s if the conversion fails. This is mainly used for decoding message.m_source endpoints, and other endpoint numbers in kernel data structures, which should always be correct. . if DEBUG_ENABLE_IPC_WARNINGS is enabled, isokendpt() and okendpt() get passed the __FILE__ and __LINE__ of the calling lines, and print messages about what is wrong with the endpoint number (out of range proc, empty proc, or inconsistent endpoint number), with the caller, making finding where the conversion failed easy without having to include code for every call to print where things went wrong. Sometimes this is harmless (wrong arg to a kernel call), sometimes it's a fatal internal inconsistency (bogus m_source). . some process table fields have been appended an _e to indicate it's become and endpoint. . process endpoint is stored in p_endpoint, without generation number. it turns out the kernel never needs the generation number, except when fork()ing, so it's decoded then. . kernel calls all take endpoints as arguments, not proc numbers. the one exception is sys_fork(), which needs to know in which slot to put the child.
2006-03-03 11:00:02 +01:00
PRIVATE int mini_send(caller_ptr, dst_e, m_ptr, flags)
2005-04-21 16:53:53 +02:00
register struct proc *caller_ptr; /* who is trying to send a message? */
'proc number' is process slot, 'endpoint' are generation-aware process instance numbers, encoded and decoded using macros in <minix/endpoint.h>. proc number -> endpoint migration . proc_nr in the interrupt hook is now an endpoint, proc_nr_e. . m_source for messages and notifies is now an endpoint, instead of proc number. . isokendpt() converts an endpoint to a process number, returns success (but fails if the process number is out of range, the process slot is not a living process, or the given endpoint number does not match the endpoint number in the process slot, indicating an old process). . okendpt() is the same as isokendpt(), but panic()s if the conversion fails. This is mainly used for decoding message.m_source endpoints, and other endpoint numbers in kernel data structures, which should always be correct. . if DEBUG_ENABLE_IPC_WARNINGS is enabled, isokendpt() and okendpt() get passed the __FILE__ and __LINE__ of the calling lines, and print messages about what is wrong with the endpoint number (out of range proc, empty proc, or inconsistent endpoint number), with the caller, making finding where the conversion failed easy without having to include code for every call to print where things went wrong. Sometimes this is harmless (wrong arg to a kernel call), sometimes it's a fatal internal inconsistency (bogus m_source). . some process table fields have been appended an _e to indicate it's become and endpoint. . process endpoint is stored in p_endpoint, without generation number. it turns out the kernel never needs the generation number, except when fork()ing, so it's decoded then. . kernel calls all take endpoints as arguments, not proc numbers. the one exception is sys_fork(), which needs to know in which slot to put the child.
2006-03-03 11:00:02 +01:00
int dst_e; /* to whom is message being sent? */
2005-04-21 16:53:53 +02:00
message *m_ptr; /* pointer to message buffer */
unsigned flags; /* system call flags */
2005-04-21 16:53:53 +02:00
{
/* Send a message from 'caller_ptr' to 'dst'. If 'dst' is blocked waiting
* for this message, copy the message to it and unblock 'dst'. If 'dst' is
2005-04-21 16:53:53 +02:00
* not waiting at all, or is waiting for another source, queue 'caller_ptr'.
*/
'proc number' is process slot, 'endpoint' are generation-aware process instance numbers, encoded and decoded using macros in <minix/endpoint.h>. proc number -> endpoint migration . proc_nr in the interrupt hook is now an endpoint, proc_nr_e. . m_source for messages and notifies is now an endpoint, instead of proc number. . isokendpt() converts an endpoint to a process number, returns success (but fails if the process number is out of range, the process slot is not a living process, or the given endpoint number does not match the endpoint number in the process slot, indicating an old process). . okendpt() is the same as isokendpt(), but panic()s if the conversion fails. This is mainly used for decoding message.m_source endpoints, and other endpoint numbers in kernel data structures, which should always be correct. . if DEBUG_ENABLE_IPC_WARNINGS is enabled, isokendpt() and okendpt() get passed the __FILE__ and __LINE__ of the calling lines, and print messages about what is wrong with the endpoint number (out of range proc, empty proc, or inconsistent endpoint number), with the caller, making finding where the conversion failed easy without having to include code for every call to print where things went wrong. Sometimes this is harmless (wrong arg to a kernel call), sometimes it's a fatal internal inconsistency (bogus m_source). . some process table fields have been appended an _e to indicate it's become and endpoint. . process endpoint is stored in p_endpoint, without generation number. it turns out the kernel never needs the generation number, except when fork()ing, so it's decoded then. . kernel calls all take endpoints as arguments, not proc numbers. the one exception is sys_fork(), which needs to know in which slot to put the child.
2006-03-03 11:00:02 +01:00
register struct proc *dst_ptr;
register struct proc **xpp;
'proc number' is process slot, 'endpoint' are generation-aware process instance numbers, encoded and decoded using macros in <minix/endpoint.h>. proc number -> endpoint migration . proc_nr in the interrupt hook is now an endpoint, proc_nr_e. . m_source for messages and notifies is now an endpoint, instead of proc number. . isokendpt() converts an endpoint to a process number, returns success (but fails if the process number is out of range, the process slot is not a living process, or the given endpoint number does not match the endpoint number in the process slot, indicating an old process). . okendpt() is the same as isokendpt(), but panic()s if the conversion fails. This is mainly used for decoding message.m_source endpoints, and other endpoint numbers in kernel data structures, which should always be correct. . if DEBUG_ENABLE_IPC_WARNINGS is enabled, isokendpt() and okendpt() get passed the __FILE__ and __LINE__ of the calling lines, and print messages about what is wrong with the endpoint number (out of range proc, empty proc, or inconsistent endpoint number), with the caller, making finding where the conversion failed easy without having to include code for every call to print where things went wrong. Sometimes this is harmless (wrong arg to a kernel call), sometimes it's a fatal internal inconsistency (bogus m_source). . some process table fields have been appended an _e to indicate it's become and endpoint. . process endpoint is stored in p_endpoint, without generation number. it turns out the kernel never needs the generation number, except when fork()ing, so it's decoded then. . kernel calls all take endpoints as arguments, not proc numbers. the one exception is sys_fork(), which needs to know in which slot to put the child.
2006-03-03 11:00:02 +01:00
int dst_p;
dst_p = _ENDPOINT_P(dst_e);
dst_ptr = proc_addr(dst_p);
2005-04-21 16:53:53 +02:00
if (dst_ptr->p_rts_flags & NO_ENDPOINT) return EDSTDIED;
/* Check if 'dst' is blocked waiting for this message. The destination's
* SENDING flag may be set when its SENDREC call blocked while sending.
*/
if ( (dst_ptr->p_rts_flags & (RECEIVING | SENDING)) == RECEIVING &&
'proc number' is process slot, 'endpoint' are generation-aware process instance numbers, encoded and decoded using macros in <minix/endpoint.h>. proc number -> endpoint migration . proc_nr in the interrupt hook is now an endpoint, proc_nr_e. . m_source for messages and notifies is now an endpoint, instead of proc number. . isokendpt() converts an endpoint to a process number, returns success (but fails if the process number is out of range, the process slot is not a living process, or the given endpoint number does not match the endpoint number in the process slot, indicating an old process). . okendpt() is the same as isokendpt(), but panic()s if the conversion fails. This is mainly used for decoding message.m_source endpoints, and other endpoint numbers in kernel data structures, which should always be correct. . if DEBUG_ENABLE_IPC_WARNINGS is enabled, isokendpt() and okendpt() get passed the __FILE__ and __LINE__ of the calling lines, and print messages about what is wrong with the endpoint number (out of range proc, empty proc, or inconsistent endpoint number), with the caller, making finding where the conversion failed easy without having to include code for every call to print where things went wrong. Sometimes this is harmless (wrong arg to a kernel call), sometimes it's a fatal internal inconsistency (bogus m_source). . some process table fields have been appended an _e to indicate it's become and endpoint. . process endpoint is stored in p_endpoint, without generation number. it turns out the kernel never needs the generation number, except when fork()ing, so it's decoded then. . kernel calls all take endpoints as arguments, not proc numbers. the one exception is sys_fork(), which needs to know in which slot to put the child.
2006-03-03 11:00:02 +01:00
(dst_ptr->p_getfrom_e == ANY
|| dst_ptr->p_getfrom_e == caller_ptr->p_endpoint)) {
2005-04-21 16:53:53 +02:00
/* Destination is indeed waiting for this message. */
CopyMess(caller_ptr->p_nr, caller_ptr, m_ptr, dst_ptr,
dst_ptr->p_messbuf);
if ((dst_ptr->p_rts_flags &= ~RECEIVING) == 0) enqueue(dst_ptr);
} else if ( ! (flags & NON_BLOCKING)) {
2005-10-07 15:23:18 +02:00
/* Destination is not waiting. Block and dequeue caller. */
2005-04-21 16:53:53 +02:00
caller_ptr->p_messbuf = m_ptr;
if (caller_ptr->p_rts_flags == 0) dequeue(caller_ptr);
caller_ptr->p_rts_flags |= SENDING;
'proc number' is process slot, 'endpoint' are generation-aware process instance numbers, encoded and decoded using macros in <minix/endpoint.h>. proc number -> endpoint migration . proc_nr in the interrupt hook is now an endpoint, proc_nr_e. . m_source for messages and notifies is now an endpoint, instead of proc number. . isokendpt() converts an endpoint to a process number, returns success (but fails if the process number is out of range, the process slot is not a living process, or the given endpoint number does not match the endpoint number in the process slot, indicating an old process). . okendpt() is the same as isokendpt(), but panic()s if the conversion fails. This is mainly used for decoding message.m_source endpoints, and other endpoint numbers in kernel data structures, which should always be correct. . if DEBUG_ENABLE_IPC_WARNINGS is enabled, isokendpt() and okendpt() get passed the __FILE__ and __LINE__ of the calling lines, and print messages about what is wrong with the endpoint number (out of range proc, empty proc, or inconsistent endpoint number), with the caller, making finding where the conversion failed easy without having to include code for every call to print where things went wrong. Sometimes this is harmless (wrong arg to a kernel call), sometimes it's a fatal internal inconsistency (bogus m_source). . some process table fields have been appended an _e to indicate it's become and endpoint. . process endpoint is stored in p_endpoint, without generation number. it turns out the kernel never needs the generation number, except when fork()ing, so it's decoded then. . kernel calls all take endpoints as arguments, not proc numbers. the one exception is sys_fork(), which needs to know in which slot to put the child.
2006-03-03 11:00:02 +01:00
caller_ptr->p_sendto_e = dst_e;
2005-04-21 16:53:53 +02:00
/* Process is now blocked. Put in on the destination's queue. */
xpp = &dst_ptr->p_caller_q; /* find end of list */
while (*xpp != NIL_PROC) xpp = &(*xpp)->p_q_link;
*xpp = caller_ptr; /* add caller to end */
caller_ptr->p_q_link = NIL_PROC; /* mark new end of list */
2005-04-21 16:53:53 +02:00
} else {
return(ENOTREADY);
}
return(OK);
}
/*===========================================================================*
* mini_receive *
2005-04-21 16:53:53 +02:00
*===========================================================================*/
'proc number' is process slot, 'endpoint' are generation-aware process instance numbers, encoded and decoded using macros in <minix/endpoint.h>. proc number -> endpoint migration . proc_nr in the interrupt hook is now an endpoint, proc_nr_e. . m_source for messages and notifies is now an endpoint, instead of proc number. . isokendpt() converts an endpoint to a process number, returns success (but fails if the process number is out of range, the process slot is not a living process, or the given endpoint number does not match the endpoint number in the process slot, indicating an old process). . okendpt() is the same as isokendpt(), but panic()s if the conversion fails. This is mainly used for decoding message.m_source endpoints, and other endpoint numbers in kernel data structures, which should always be correct. . if DEBUG_ENABLE_IPC_WARNINGS is enabled, isokendpt() and okendpt() get passed the __FILE__ and __LINE__ of the calling lines, and print messages about what is wrong with the endpoint number (out of range proc, empty proc, or inconsistent endpoint number), with the caller, making finding where the conversion failed easy without having to include code for every call to print where things went wrong. Sometimes this is harmless (wrong arg to a kernel call), sometimes it's a fatal internal inconsistency (bogus m_source). . some process table fields have been appended an _e to indicate it's become and endpoint. . process endpoint is stored in p_endpoint, without generation number. it turns out the kernel never needs the generation number, except when fork()ing, so it's decoded then. . kernel calls all take endpoints as arguments, not proc numbers. the one exception is sys_fork(), which needs to know in which slot to put the child.
2006-03-03 11:00:02 +01:00
PRIVATE int mini_receive(caller_ptr, src_e, m_ptr, flags)
2005-04-21 16:53:53 +02:00
register struct proc *caller_ptr; /* process trying to get message */
'proc number' is process slot, 'endpoint' are generation-aware process instance numbers, encoded and decoded using macros in <minix/endpoint.h>. proc number -> endpoint migration . proc_nr in the interrupt hook is now an endpoint, proc_nr_e. . m_source for messages and notifies is now an endpoint, instead of proc number. . isokendpt() converts an endpoint to a process number, returns success (but fails if the process number is out of range, the process slot is not a living process, or the given endpoint number does not match the endpoint number in the process slot, indicating an old process). . okendpt() is the same as isokendpt(), but panic()s if the conversion fails. This is mainly used for decoding message.m_source endpoints, and other endpoint numbers in kernel data structures, which should always be correct. . if DEBUG_ENABLE_IPC_WARNINGS is enabled, isokendpt() and okendpt() get passed the __FILE__ and __LINE__ of the calling lines, and print messages about what is wrong with the endpoint number (out of range proc, empty proc, or inconsistent endpoint number), with the caller, making finding where the conversion failed easy without having to include code for every call to print where things went wrong. Sometimes this is harmless (wrong arg to a kernel call), sometimes it's a fatal internal inconsistency (bogus m_source). . some process table fields have been appended an _e to indicate it's become and endpoint. . process endpoint is stored in p_endpoint, without generation number. it turns out the kernel never needs the generation number, except when fork()ing, so it's decoded then. . kernel calls all take endpoints as arguments, not proc numbers. the one exception is sys_fork(), which needs to know in which slot to put the child.
2006-03-03 11:00:02 +01:00
int src_e; /* which message source is wanted */
2005-04-21 16:53:53 +02:00
message *m_ptr; /* pointer to message buffer */
unsigned flags; /* system call flags */
2005-04-21 16:53:53 +02:00
{
/* A process or task wants to get a message. If a message is already queued,
2005-04-21 16:53:53 +02:00
* acquire it and deblock the sender. If no message from the desired source
* is available block the caller, unless the flags don't allow blocking.
2005-04-21 16:53:53 +02:00
*/
register struct proc **xpp;
register struct notification **ntf_q_pp;
2005-04-21 16:53:53 +02:00
message m;
int bit_nr;
sys_map_t *map;
bitchunk_t *chunk;
'proc number' is process slot, 'endpoint' are generation-aware process instance numbers, encoded and decoded using macros in <minix/endpoint.h>. proc number -> endpoint migration . proc_nr in the interrupt hook is now an endpoint, proc_nr_e. . m_source for messages and notifies is now an endpoint, instead of proc number. . isokendpt() converts an endpoint to a process number, returns success (but fails if the process number is out of range, the process slot is not a living process, or the given endpoint number does not match the endpoint number in the process slot, indicating an old process). . okendpt() is the same as isokendpt(), but panic()s if the conversion fails. This is mainly used for decoding message.m_source endpoints, and other endpoint numbers in kernel data structures, which should always be correct. . if DEBUG_ENABLE_IPC_WARNINGS is enabled, isokendpt() and okendpt() get passed the __FILE__ and __LINE__ of the calling lines, and print messages about what is wrong with the endpoint number (out of range proc, empty proc, or inconsistent endpoint number), with the caller, making finding where the conversion failed easy without having to include code for every call to print where things went wrong. Sometimes this is harmless (wrong arg to a kernel call), sometimes it's a fatal internal inconsistency (bogus m_source). . some process table fields have been appended an _e to indicate it's become and endpoint. . process endpoint is stored in p_endpoint, without generation number. it turns out the kernel never needs the generation number, except when fork()ing, so it's decoded then. . kernel calls all take endpoints as arguments, not proc numbers. the one exception is sys_fork(), which needs to know in which slot to put the child.
2006-03-03 11:00:02 +01:00
int i, src_id, src_proc_nr, src_p;
if(src_e == ANY) src_p = ANY;
else
{
okendpt(src_e, &src_p);
if (proc_addr(src_p)->p_rts_flags & NO_ENDPOINT) return ESRCDIED;
}
2005-04-21 16:53:53 +02:00
/* Check to see if a message from desired source is already available.
* The caller's SENDING flag may be set if SENDREC couldn't send. If it is
* set, the process should be blocked.
*/
if (!(caller_ptr->p_rts_flags & SENDING)) {
2005-04-21 16:53:53 +02:00
/* Check if there are pending notifications, except for SENDREC. */
2006-03-10 17:10:05 +01:00
if (! (caller_ptr->p_misc_flags & REPLY_PENDING)) {
map = &priv(caller_ptr)->s_notify_pending;
for (chunk=&map->chunk[0]; chunk<&map->chunk[NR_SYS_CHUNKS]; chunk++) {
/* Find a pending notification from the requested source. */
if (! *chunk) continue; /* no bits in chunk */
for (i=0; ! (*chunk & (1<<i)); ++i) {} /* look up the bit */
src_id = (chunk - &map->chunk[0]) * BITCHUNK_BITS + i;
if (src_id >= NR_SYS_PROCS) break; /* out of range */
src_proc_nr = id_to_nr(src_id); /* get source proc */
#if DEBUG_ENABLE_IPC_WARNINGS
if(src_proc_nr == NONE) {
kprintf("mini_receive: sending notify from NONE\n");
}
#endif
'proc number' is process slot, 'endpoint' are generation-aware process instance numbers, encoded and decoded using macros in <minix/endpoint.h>. proc number -> endpoint migration . proc_nr in the interrupt hook is now an endpoint, proc_nr_e. . m_source for messages and notifies is now an endpoint, instead of proc number. . isokendpt() converts an endpoint to a process number, returns success (but fails if the process number is out of range, the process slot is not a living process, or the given endpoint number does not match the endpoint number in the process slot, indicating an old process). . okendpt() is the same as isokendpt(), but panic()s if the conversion fails. This is mainly used for decoding message.m_source endpoints, and other endpoint numbers in kernel data structures, which should always be correct. . if DEBUG_ENABLE_IPC_WARNINGS is enabled, isokendpt() and okendpt() get passed the __FILE__ and __LINE__ of the calling lines, and print messages about what is wrong with the endpoint number (out of range proc, empty proc, or inconsistent endpoint number), with the caller, making finding where the conversion failed easy without having to include code for every call to print where things went wrong. Sometimes this is harmless (wrong arg to a kernel call), sometimes it's a fatal internal inconsistency (bogus m_source). . some process table fields have been appended an _e to indicate it's become and endpoint. . process endpoint is stored in p_endpoint, without generation number. it turns out the kernel never needs the generation number, except when fork()ing, so it's decoded then. . kernel calls all take endpoints as arguments, not proc numbers. the one exception is sys_fork(), which needs to know in which slot to put the child.
2006-03-03 11:00:02 +01:00
if (src_e!=ANY && src_p != src_proc_nr) continue;/* source not ok */
*chunk &= ~(1 << i); /* no longer pending */
/* Found a suitable source, deliver the notification message. */
BuildMess(&m, src_proc_nr, caller_ptr); /* assemble message */
CopyMess(src_proc_nr, proc_addr(HARDWARE), &m, caller_ptr, m_ptr);
return(OK); /* report success */
}
}
/* Check caller queue. Use pointer pointers to keep code simple. */
xpp = &caller_ptr->p_caller_q;
while (*xpp != NIL_PROC) {
'proc number' is process slot, 'endpoint' are generation-aware process instance numbers, encoded and decoded using macros in <minix/endpoint.h>. proc number -> endpoint migration . proc_nr in the interrupt hook is now an endpoint, proc_nr_e. . m_source for messages and notifies is now an endpoint, instead of proc number. . isokendpt() converts an endpoint to a process number, returns success (but fails if the process number is out of range, the process slot is not a living process, or the given endpoint number does not match the endpoint number in the process slot, indicating an old process). . okendpt() is the same as isokendpt(), but panic()s if the conversion fails. This is mainly used for decoding message.m_source endpoints, and other endpoint numbers in kernel data structures, which should always be correct. . if DEBUG_ENABLE_IPC_WARNINGS is enabled, isokendpt() and okendpt() get passed the __FILE__ and __LINE__ of the calling lines, and print messages about what is wrong with the endpoint number (out of range proc, empty proc, or inconsistent endpoint number), with the caller, making finding where the conversion failed easy without having to include code for every call to print where things went wrong. Sometimes this is harmless (wrong arg to a kernel call), sometimes it's a fatal internal inconsistency (bogus m_source). . some process table fields have been appended an _e to indicate it's become and endpoint. . process endpoint is stored in p_endpoint, without generation number. it turns out the kernel never needs the generation number, except when fork()ing, so it's decoded then. . kernel calls all take endpoints as arguments, not proc numbers. the one exception is sys_fork(), which needs to know in which slot to put the child.
2006-03-03 11:00:02 +01:00
if (src_e == ANY || src_p == proc_nr(*xpp)) {
2006-03-08 13:06:33 +01:00
#if 0
if ((*xpp)->p_rts_flags & SLOT_FREE)
{
kprintf("listening to the dead?!?\n");
return EINVAL;
}
#endif
/* Found acceptable message. Copy it and update status. */
CopyMess((*xpp)->p_nr, *xpp, (*xpp)->p_messbuf, caller_ptr, m_ptr);
if (((*xpp)->p_rts_flags &= ~SENDING) == 0) enqueue(*xpp);
*xpp = (*xpp)->p_q_link; /* remove from queue */
return(OK); /* report success */
}
xpp = &(*xpp)->p_q_link; /* proceed to next */
}
2005-04-21 16:53:53 +02:00
}
/* No suitable message is available or the caller couldn't send in SENDREC.
* Block the process trying to receive, unless the flags tell otherwise.
2005-04-21 16:53:53 +02:00
*/
if ( ! (flags & NON_BLOCKING)) {
'proc number' is process slot, 'endpoint' are generation-aware process instance numbers, encoded and decoded using macros in <minix/endpoint.h>. proc number -> endpoint migration . proc_nr in the interrupt hook is now an endpoint, proc_nr_e. . m_source for messages and notifies is now an endpoint, instead of proc number. . isokendpt() converts an endpoint to a process number, returns success (but fails if the process number is out of range, the process slot is not a living process, or the given endpoint number does not match the endpoint number in the process slot, indicating an old process). . okendpt() is the same as isokendpt(), but panic()s if the conversion fails. This is mainly used for decoding message.m_source endpoints, and other endpoint numbers in kernel data structures, which should always be correct. . if DEBUG_ENABLE_IPC_WARNINGS is enabled, isokendpt() and okendpt() get passed the __FILE__ and __LINE__ of the calling lines, and print messages about what is wrong with the endpoint number (out of range proc, empty proc, or inconsistent endpoint number), with the caller, making finding where the conversion failed easy without having to include code for every call to print where things went wrong. Sometimes this is harmless (wrong arg to a kernel call), sometimes it's a fatal internal inconsistency (bogus m_source). . some process table fields have been appended an _e to indicate it's become and endpoint. . process endpoint is stored in p_endpoint, without generation number. it turns out the kernel never needs the generation number, except when fork()ing, so it's decoded then. . kernel calls all take endpoints as arguments, not proc numbers. the one exception is sys_fork(), which needs to know in which slot to put the child.
2006-03-03 11:00:02 +01:00
caller_ptr->p_getfrom_e = src_e;
2005-04-21 16:53:53 +02:00
caller_ptr->p_messbuf = m_ptr;
if (caller_ptr->p_rts_flags == 0) dequeue(caller_ptr);
caller_ptr->p_rts_flags |= RECEIVING;
2005-04-21 16:53:53 +02:00
return(OK);
} else {
return(ENOTREADY);
}
}
/*===========================================================================*
* mini_notify *
*===========================================================================*/
PRIVATE int mini_notify(caller_ptr, dst)
register struct proc *caller_ptr; /* sender of the notification */
int dst; /* which process to notify */
{
register struct proc *dst_ptr = proc_addr(dst);
int src_id; /* source id for late delivery */
message m; /* the notification message */
/* Check to see if target is blocked waiting for this message. A process
* can be both sending and receiving during a SENDREC system call.
*/
if ((dst_ptr->p_rts_flags & (RECEIVING|SENDING)) == RECEIVING &&
2006-03-10 17:10:05 +01:00
! (dst_ptr->p_misc_flags & REPLY_PENDING) &&
(dst_ptr->p_getfrom_e == ANY ||
dst_ptr->p_getfrom_e == caller_ptr->p_endpoint)) {
/* Destination is indeed waiting for a message. Assemble a notification
* message and deliver it. Copy from pseudo-source HARDWARE, since the
* message is in the kernel's address space.
*/
BuildMess(&m, proc_nr(caller_ptr), dst_ptr);
CopyMess(proc_nr(caller_ptr), proc_addr(HARDWARE), &m,
dst_ptr, dst_ptr->p_messbuf);
dst_ptr->p_rts_flags &= ~RECEIVING; /* deblock destination */
if (dst_ptr->p_rts_flags == 0) enqueue(dst_ptr);
return(OK);
}
/* Destination is not ready to receive the notification. Add it to the
* bit map with pending notifications. Note the indirectness: the system id
* instead of the process number is used in the pending bit map.
*/
src_id = priv(caller_ptr)->s_id;
set_sys_bit(priv(dst_ptr)->s_notify_pending, src_id);
return(OK);
}
2005-09-11 18:44:06 +02:00
/*===========================================================================*
* lock_notify *
*===========================================================================*/
'proc number' is process slot, 'endpoint' are generation-aware process instance numbers, encoded and decoded using macros in <minix/endpoint.h>. proc number -> endpoint migration . proc_nr in the interrupt hook is now an endpoint, proc_nr_e. . m_source for messages and notifies is now an endpoint, instead of proc number. . isokendpt() converts an endpoint to a process number, returns success (but fails if the process number is out of range, the process slot is not a living process, or the given endpoint number does not match the endpoint number in the process slot, indicating an old process). . okendpt() is the same as isokendpt(), but panic()s if the conversion fails. This is mainly used for decoding message.m_source endpoints, and other endpoint numbers in kernel data structures, which should always be correct. . if DEBUG_ENABLE_IPC_WARNINGS is enabled, isokendpt() and okendpt() get passed the __FILE__ and __LINE__ of the calling lines, and print messages about what is wrong with the endpoint number (out of range proc, empty proc, or inconsistent endpoint number), with the caller, making finding where the conversion failed easy without having to include code for every call to print where things went wrong. Sometimes this is harmless (wrong arg to a kernel call), sometimes it's a fatal internal inconsistency (bogus m_source). . some process table fields have been appended an _e to indicate it's become and endpoint. . process endpoint is stored in p_endpoint, without generation number. it turns out the kernel never needs the generation number, except when fork()ing, so it's decoded then. . kernel calls all take endpoints as arguments, not proc numbers. the one exception is sys_fork(), which needs to know in which slot to put the child.
2006-03-03 11:00:02 +01:00
PUBLIC int lock_notify(src_e, dst_e)
int src_e; /* (endpoint) sender of the notification */
int dst_e; /* (endpoint) who is to be notified */
{
/* Safe gateway to mini_notify() for tasks and interrupt handlers. The sender
* is explicitely given to prevent confusion where the call comes from. MINIX
* kernel is not reentrant, which means to interrupts are disabled after
* the first kernel entry (hardware interrupt, trap, or exception). Locking
* is done by temporarily disabling interrupts.
*/
'proc number' is process slot, 'endpoint' are generation-aware process instance numbers, encoded and decoded using macros in <minix/endpoint.h>. proc number -> endpoint migration . proc_nr in the interrupt hook is now an endpoint, proc_nr_e. . m_source for messages and notifies is now an endpoint, instead of proc number. . isokendpt() converts an endpoint to a process number, returns success (but fails if the process number is out of range, the process slot is not a living process, or the given endpoint number does not match the endpoint number in the process slot, indicating an old process). . okendpt() is the same as isokendpt(), but panic()s if the conversion fails. This is mainly used for decoding message.m_source endpoints, and other endpoint numbers in kernel data structures, which should always be correct. . if DEBUG_ENABLE_IPC_WARNINGS is enabled, isokendpt() and okendpt() get passed the __FILE__ and __LINE__ of the calling lines, and print messages about what is wrong with the endpoint number (out of range proc, empty proc, or inconsistent endpoint number), with the caller, making finding where the conversion failed easy without having to include code for every call to print where things went wrong. Sometimes this is harmless (wrong arg to a kernel call), sometimes it's a fatal internal inconsistency (bogus m_source). . some process table fields have been appended an _e to indicate it's become and endpoint. . process endpoint is stored in p_endpoint, without generation number. it turns out the kernel never needs the generation number, except when fork()ing, so it's decoded then. . kernel calls all take endpoints as arguments, not proc numbers. the one exception is sys_fork(), which needs to know in which slot to put the child.
2006-03-03 11:00:02 +01:00
int result, src, dst;
if(!isokendpt(src_e, &src) || !isokendpt(dst_e, &dst))
return EDEADSRCDST;
/* Exception or interrupt occurred, thus already locked. */
if (k_reenter >= 0) {
result = mini_notify(proc_addr(src), dst);
}
/* Call from task level, locking is required. */
else {
lock(0, "notify");
result = mini_notify(proc_addr(src), dst);
unlock(0);
}
return(result);
}
2005-04-21 16:53:53 +02:00
/*===========================================================================*
* enqueue *
2005-04-21 16:53:53 +02:00
*===========================================================================*/
PRIVATE void enqueue(rp)
2005-04-21 16:53:53 +02:00
register struct proc *rp; /* this process is now runnable */
{
/* Add 'rp' to one of the queues of runnable processes. This function is
* responsible for inserting a process into one of the scheduling queues.
* The mechanism is implemented here. The actual scheduling policy is
* defined in sched() and pick_proc().
*/
int q; /* scheduling queue to use */
int front; /* add to front or back */
2005-04-21 16:53:53 +02:00
#if DEBUG_SCHED_CHECK
check_runqueues("enqueue");
2005-09-11 18:44:06 +02:00
if (rp->p_ready) kprintf("enqueue() already ready process\n");
#endif
/* Determine where to insert to process. */
sched(rp, &q, &front);
/* Now add the process to the queue. */
if (rdy_head[q] == NIL_PROC) { /* add to empty queue */
rdy_head[q] = rdy_tail[q] = rp; /* create a new queue */
rp->p_nextready = NIL_PROC; /* mark new end */
2005-04-21 16:53:53 +02:00
}
else if (front) { /* add to head of queue */
rp->p_nextready = rdy_head[q]; /* chain head of queue */
rdy_head[q] = rp; /* set new queue head */
}
else { /* add to tail of queue */
rdy_tail[q]->p_nextready = rp; /* chain tail of queue */
rdy_tail[q] = rp; /* set new queue tail */
rp->p_nextready = NIL_PROC; /* mark new end */
2005-04-21 16:53:53 +02:00
}
/* Now select the next process to run. */
pick_proc();
#if DEBUG_SCHED_CHECK
rp->p_ready = 1;
check_runqueues("enqueue");
#endif
2005-04-21 16:53:53 +02:00
}
/*===========================================================================*
* dequeue *
2005-04-21 16:53:53 +02:00
*===========================================================================*/
PRIVATE void dequeue(rp)
2005-04-21 16:53:53 +02:00
register struct proc *rp; /* this process is no longer runnable */
{
/* A process must be removed from the scheduling queues, for example, because
* it has blocked. If the currently active process is removed, a new process
* is picked to run by calling pick_proc().
*/
register int q = rp->p_priority; /* queue to use */
register struct proc **xpp; /* iterate over queue */
register struct proc *prev_xp;
2005-04-21 16:53:53 +02:00
/* Side-effect for kernel: check if the task's stack still is ok? */
if (iskernelp(rp)) {
if (*priv(rp)->s_stack_guard != STACK_GUARD)
panic("stack overrun by task", proc_nr(rp));
2005-04-21 16:53:53 +02:00
}
#if DEBUG_SCHED_CHECK
check_runqueues("dequeue");
if (! rp->p_ready) kprintf("dequeue() already unready process\n");
#endif
2005-04-21 16:53:53 +02:00
/* Now make sure that the process is not in its ready queue. Remove the
* process if it is found. A process can be made unready even if it is not
* running by being sent a signal that kills it.
2005-04-21 16:53:53 +02:00
*/
prev_xp = NIL_PROC;
for (xpp = &rdy_head[q]; *xpp != NIL_PROC; xpp = &(*xpp)->p_nextready) {
if (*xpp == rp) { /* found process to remove */
*xpp = (*xpp)->p_nextready; /* replace with next chain */
if (rp == rdy_tail[q]) /* queue tail removed */
rdy_tail[q] = prev_xp; /* set new tail */
if (rp == proc_ptr || rp == next_ptr) /* active process removed */
pick_proc(); /* pick new process to run */
break;
}
prev_xp = *xpp; /* save previous in chain */
2005-04-21 16:53:53 +02:00
}
#if DEBUG_SCHED_CHECK
rp->p_ready = 0;
check_runqueues("dequeue");
#endif
2005-04-21 16:53:53 +02:00
}
/*===========================================================================*
* sched *
*===========================================================================*/
PRIVATE void sched(rp, queue, front)
register struct proc *rp; /* process to be scheduled */
int *queue; /* return: queue to use */
int *front; /* return: front or back */
2005-04-21 16:53:53 +02:00
{
/* This function determines the scheduling policy. It is called whenever a
* process must be added to one of the scheduling queues to decide where to
* insert it. As a side-effect the process' priority may be updated.
*/
int time_left = (rp->p_ticks_left > 0); /* quantum fully consumed */
/* Check whether the process has time left. Otherwise give a new quantum
2006-03-10 17:10:05 +01:00
* and lower the process' priority, unless the process already is in the
* lowest queue.
*/
2006-03-10 17:10:05 +01:00
if (! time_left) { /* quantum consumed ? */
rp->p_ticks_left = rp->p_quantum_size; /* give new quantum */
2006-03-10 17:10:05 +01:00
if (rp->p_priority < (IDLE_Q-1)) {
rp->p_priority += 1; /* lower priority */
}
}
/* If there is time left, the process is added to the front of its queue,
* so that it can immediately run. The queue to use simply is always the
* process' current priority.
*/
*queue = rp->p_priority;
*front = time_left;
}
/*===========================================================================*
* pick_proc *
*===========================================================================*/
PRIVATE void pick_proc()
{
/* Decide who to run now. A new process is selected by setting 'next_ptr'.
* When a billable process is selected, record it in 'bill_ptr', so that the
* clock task can tell who to bill for system time.
*/
register struct proc *rp; /* process to run */
int q; /* iterate over queues */
/* Check each of the scheduling queues for ready processes. The number of
* queues is defined in proc.h, and priorities are set in the task table.
* The lowest queue contains IDLE, which is always ready.
*/
for (q=0; q < NR_SCHED_QUEUES; q++) {
if ( (rp = rdy_head[q]) != NIL_PROC) {
next_ptr = rp; /* run process 'rp' next */
if (priv(rp)->s_flags & BILLABLE)
bill_ptr = rp; /* bill for system time */
return;
}
}
2005-04-21 16:53:53 +02:00
}
2006-03-10 17:10:05 +01:00
/*===========================================================================*
* balance_queues *
*===========================================================================*/
#define Q_BALANCE_TICKS 100
PUBLIC void balance_queues(tp)
timer_t *tp; /* watchdog timer pointer */
{
/* Check entire process table and give all process a higher priority. This
* effectively means giving a new quantum. If a process already is at its
* maximum priority, its quantum will be renewed.
*/
static timer_t queue_timer; /* timer structure to use */
register struct proc* rp; /* process table pointer */
clock_t next_period; /* time of next period */
int ticks_added = 0; /* total time added */
for (rp=BEG_PROC_ADDR; rp<END_PROC_ADDR; rp++) {
if (! isemptyp(rp)) { /* check slot use */
lock(5,"balance_queues");
if (rp->p_priority > rp->p_max_priority) { /* update priority? */
if (rp->p_rts_flags == 0) dequeue(rp); /* take off queue */
ticks_added += rp->p_quantum_size; /* do accounting */
rp->p_priority -= 1; /* raise priority */
if (rp->p_rts_flags == 0) enqueue(rp); /* put on queue */
}
else {
ticks_added += rp->p_quantum_size - rp->p_ticks_left;
rp->p_ticks_left = rp->p_quantum_size; /* give new quantum */
}
unlock(5);
}
}
#if DEBUG
2006-03-10 17:10:05 +01:00
kprintf("ticks_added: %d\n", ticks_added);
#endif
2006-03-10 17:10:05 +01:00
/* Now schedule a new watchdog timer to balance the queues again. The
* period depends on the total amount of quantum ticks added.
*/
next_period = MAX(Q_BALANCE_TICKS, ticks_added); /* calculate next */
set_timer(&queue_timer, get_uptime() + next_period, balance_queues);
}
2005-09-11 18:44:06 +02:00
/*===========================================================================*
* lock_send *
*===========================================================================*/
'proc number' is process slot, 'endpoint' are generation-aware process instance numbers, encoded and decoded using macros in <minix/endpoint.h>. proc number -> endpoint migration . proc_nr in the interrupt hook is now an endpoint, proc_nr_e. . m_source for messages and notifies is now an endpoint, instead of proc number. . isokendpt() converts an endpoint to a process number, returns success (but fails if the process number is out of range, the process slot is not a living process, or the given endpoint number does not match the endpoint number in the process slot, indicating an old process). . okendpt() is the same as isokendpt(), but panic()s if the conversion fails. This is mainly used for decoding message.m_source endpoints, and other endpoint numbers in kernel data structures, which should always be correct. . if DEBUG_ENABLE_IPC_WARNINGS is enabled, isokendpt() and okendpt() get passed the __FILE__ and __LINE__ of the calling lines, and print messages about what is wrong with the endpoint number (out of range proc, empty proc, or inconsistent endpoint number), with the caller, making finding where the conversion failed easy without having to include code for every call to print where things went wrong. Sometimes this is harmless (wrong arg to a kernel call), sometimes it's a fatal internal inconsistency (bogus m_source). . some process table fields have been appended an _e to indicate it's become and endpoint. . process endpoint is stored in p_endpoint, without generation number. it turns out the kernel never needs the generation number, except when fork()ing, so it's decoded then. . kernel calls all take endpoints as arguments, not proc numbers. the one exception is sys_fork(), which needs to know in which slot to put the child.
2006-03-03 11:00:02 +01:00
PUBLIC int lock_send(dst_e, m_ptr)
int dst_e; /* to whom is message being sent? */
message *m_ptr; /* pointer to message buffer */
{
/* Safe gateway to mini_send() for tasks. */
int result;
lock(2, "send");
'proc number' is process slot, 'endpoint' are generation-aware process instance numbers, encoded and decoded using macros in <minix/endpoint.h>. proc number -> endpoint migration . proc_nr in the interrupt hook is now an endpoint, proc_nr_e. . m_source for messages and notifies is now an endpoint, instead of proc number. . isokendpt() converts an endpoint to a process number, returns success (but fails if the process number is out of range, the process slot is not a living process, or the given endpoint number does not match the endpoint number in the process slot, indicating an old process). . okendpt() is the same as isokendpt(), but panic()s if the conversion fails. This is mainly used for decoding message.m_source endpoints, and other endpoint numbers in kernel data structures, which should always be correct. . if DEBUG_ENABLE_IPC_WARNINGS is enabled, isokendpt() and okendpt() get passed the __FILE__ and __LINE__ of the calling lines, and print messages about what is wrong with the endpoint number (out of range proc, empty proc, or inconsistent endpoint number), with the caller, making finding where the conversion failed easy without having to include code for every call to print where things went wrong. Sometimes this is harmless (wrong arg to a kernel call), sometimes it's a fatal internal inconsistency (bogus m_source). . some process table fields have been appended an _e to indicate it's become and endpoint. . process endpoint is stored in p_endpoint, without generation number. it turns out the kernel never needs the generation number, except when fork()ing, so it's decoded then. . kernel calls all take endpoints as arguments, not proc numbers. the one exception is sys_fork(), which needs to know in which slot to put the child.
2006-03-03 11:00:02 +01:00
result = mini_send(proc_ptr, dst_e, m_ptr, NON_BLOCKING);
unlock(2);
return(result);
}
2005-09-11 18:44:06 +02:00
/*===========================================================================*
* lock_enqueue *
*===========================================================================*/
PUBLIC void lock_enqueue(rp)
2005-04-21 16:53:53 +02:00
struct proc *rp; /* this process is now runnable */
{
/* Safe gateway to enqueue() for tasks. */
lock(3, "enqueue");
enqueue(rp);
unlock(3);
2005-04-21 16:53:53 +02:00
}
2005-09-11 18:44:06 +02:00
/*===========================================================================*
* lock_dequeue *
*===========================================================================*/
PUBLIC void lock_dequeue(rp)
2005-04-21 16:53:53 +02:00
struct proc *rp; /* this process is no longer runnable */
{
/* Safe gateway to dequeue() for tasks. */
if (k_reenter >= 0) {
2006-03-10 17:10:05 +01:00
/* We're in an exception or interrupt, so don't lock (and ...
* don't unlock).
*/
dequeue(rp);
} else {
lock(4, "dequeue");
dequeue(rp);
unlock(4);
}
2005-04-21 16:53:53 +02:00
}
'proc number' is process slot, 'endpoint' are generation-aware process instance numbers, encoded and decoded using macros in <minix/endpoint.h>. proc number -> endpoint migration . proc_nr in the interrupt hook is now an endpoint, proc_nr_e. . m_source for messages and notifies is now an endpoint, instead of proc number. . isokendpt() converts an endpoint to a process number, returns success (but fails if the process number is out of range, the process slot is not a living process, or the given endpoint number does not match the endpoint number in the process slot, indicating an old process). . okendpt() is the same as isokendpt(), but panic()s if the conversion fails. This is mainly used for decoding message.m_source endpoints, and other endpoint numbers in kernel data structures, which should always be correct. . if DEBUG_ENABLE_IPC_WARNINGS is enabled, isokendpt() and okendpt() get passed the __FILE__ and __LINE__ of the calling lines, and print messages about what is wrong with the endpoint number (out of range proc, empty proc, or inconsistent endpoint number), with the caller, making finding where the conversion failed easy without having to include code for every call to print where things went wrong. Sometimes this is harmless (wrong arg to a kernel call), sometimes it's a fatal internal inconsistency (bogus m_source). . some process table fields have been appended an _e to indicate it's become and endpoint. . process endpoint is stored in p_endpoint, without generation number. it turns out the kernel never needs the generation number, except when fork()ing, so it's decoded then. . kernel calls all take endpoints as arguments, not proc numbers. the one exception is sys_fork(), which needs to know in which slot to put the child.
2006-03-03 11:00:02 +01:00
/*===========================================================================*
* isokendpt_f *
*===========================================================================*/
#if DEBUG_ENABLE_IPC_WARNINGS
PUBLIC int isokendpt_f(file, line, e, p, fatalflag)
char *file;
int line;
#else
PUBLIC int isokendpt_f(e, p, fatalflag)
#endif
endpoint_t e;
int *p, fatalflag;
'proc number' is process slot, 'endpoint' are generation-aware process instance numbers, encoded and decoded using macros in <minix/endpoint.h>. proc number -> endpoint migration . proc_nr in the interrupt hook is now an endpoint, proc_nr_e. . m_source for messages and notifies is now an endpoint, instead of proc number. . isokendpt() converts an endpoint to a process number, returns success (but fails if the process number is out of range, the process slot is not a living process, or the given endpoint number does not match the endpoint number in the process slot, indicating an old process). . okendpt() is the same as isokendpt(), but panic()s if the conversion fails. This is mainly used for decoding message.m_source endpoints, and other endpoint numbers in kernel data structures, which should always be correct. . if DEBUG_ENABLE_IPC_WARNINGS is enabled, isokendpt() and okendpt() get passed the __FILE__ and __LINE__ of the calling lines, and print messages about what is wrong with the endpoint number (out of range proc, empty proc, or inconsistent endpoint number), with the caller, making finding where the conversion failed easy without having to include code for every call to print where things went wrong. Sometimes this is harmless (wrong arg to a kernel call), sometimes it's a fatal internal inconsistency (bogus m_source). . some process table fields have been appended an _e to indicate it's become and endpoint. . process endpoint is stored in p_endpoint, without generation number. it turns out the kernel never needs the generation number, except when fork()ing, so it's decoded then. . kernel calls all take endpoints as arguments, not proc numbers. the one exception is sys_fork(), which needs to know in which slot to put the child.
2006-03-03 11:00:02 +01:00
{
int ok = 0;
/* Convert an endpoint number into a process number.
* Return nonzero if the process is alive with the corresponding
* generation number, zero otherwise.
*
* This function is called with file and line number by the
* isokendpt_d macro if DEBUG_ENABLE_IPC_WARNINGS is defined,
* otherwise without. This allows us to print the where the
* conversion was attempted, making the errors verbose without
* adding code for that at every call.
*
* If fatalflag is nonzero, we must panic if the conversion doesn't
* succeed.
*/
*p = _ENDPOINT_P(e);
if(!isokprocn(*p)) {
#if DEBUG_ENABLE_IPC_WARNINGS
kprintf("kernel:%s:%d: bad endpoint %d: proc %d out of range\n",
file, line, e, *p);
#endif
} else if(isemptyn(*p)) {
#if DEBUG_ENABLE_IPC_WARNINGS
kprintf("kernel:%s:%d: bad endpoint %d: proc %d empty\n", file, line, e, *p);
#endif
} else if(proc_addr(*p)->p_endpoint != e) {
#if DEBUG_ENABLE_IPC_WARNINGS
kprintf("kernel:%s:%d: bad endpoint %d: proc %d has ept %d (generation %d vs. %d)\n", file, line,
e, *p, proc_addr(*p)->p_endpoint,
_ENDPOINT_G(e), _ENDPOINT_G(proc_addr(*p)->p_endpoint));
#endif
} else ok = 1;
if(!ok && fatalflag) {
panic("invalid endpoint ", e);
}
return ok;
}