minix/servers/sched/schedule.c

368 lines
10 KiB
C
Raw Normal View History

Scheduling server (by Bjorn Swift) In this second phase, scheduling is moved from PM to its own scheduler (see r6557 for phase one). In the next phase we hope to a) include useful information in the "out of quantum" message and b) create some simple scheduling policy that makes use of that information. When the system starts up, PM will iterate over its process table and ask SCHED to take over scheduling unprivileged processes. This is done by sending a SCHEDULING_START message to SCHED. This message includes the processes endpoint, the parent's endpoint and its nice level. The scheduler adds this process to its schedproc table, issues a schedctl, and returns its own endpoint to PM - as the endpoint of the effective scheduler. When a process terminates, a SCHEDULING_STOP message is sent to the scheduler. The reason for this effective endpoint is for future compatibility. Some day, we may have a scheduler that, instead of scheduling the process itself, forwards the SCHEDULING_START message on to another scheduler. PM has information on who schedules whom. As such, scheduling messages from user-land are sent through PM. An example is when processes change their priority, using nice(). In that case, a getsetpriority message is sent to PM, which then sends a SCHEDULING_SET_NICE to the process's effective scheduler. When a process is forked through PM, it inherits its parent's scheduler, but is spawned with an empty quantum. As before, a request to fork a process flows through VM before returning to PM, which then wakes up the child process. This flow has been modified slightly so that PM notifies the scheduler of the new process, before waking up the child process. If the scheduler fails to take over scheduling, the child process is torn down and the fork fails with an erroneous value. Process priority is entirely decided upon using nice levels. PM stores a copy of each process's nice level and when a child is forked, its parent's nice level is sent in the SCHEDULING_START message. How this level is mapped to a priority queue is up to the scheduler. It should be noted that the nice level is used to determine the max_priority and the parent could have been in a lower priority when it was spawned. To prevent a CPU intensive process from hawking the CPU by continuously forking children that get scheduled in the max_priority, the scheduler should determine in which queue the parent is currently scheduled, and schedule the child in that same queue. Other fixes: The USER_Q in kernel/proc.h was incorrectly defined as NR_SCHED_QUEUES/2. That results in a "off by one" error when converting priority->nice->priority for nice=0. This also had the side effect that if someone were to set the MAX_USER_Q to something else than 0, then USER_Q would be off.
2010-05-18 15:39:04 +02:00
/* This file contains the scheduling policy for SCHED
*
* The entry points are:
* do_noquantum: Called on behalf of process' that run out of quantum
* do_start_scheduling Request to start scheduling a proc
* do_stop_scheduling Request to stop scheduling a proc
* do_nice Request to change the nice level on a proc
Scheduling server (by Bjorn Swift) In this second phase, scheduling is moved from PM to its own scheduler (see r6557 for phase one). In the next phase we hope to a) include useful information in the "out of quantum" message and b) create some simple scheduling policy that makes use of that information. When the system starts up, PM will iterate over its process table and ask SCHED to take over scheduling unprivileged processes. This is done by sending a SCHEDULING_START message to SCHED. This message includes the processes endpoint, the parent's endpoint and its nice level. The scheduler adds this process to its schedproc table, issues a schedctl, and returns its own endpoint to PM - as the endpoint of the effective scheduler. When a process terminates, a SCHEDULING_STOP message is sent to the scheduler. The reason for this effective endpoint is for future compatibility. Some day, we may have a scheduler that, instead of scheduling the process itself, forwards the SCHEDULING_START message on to another scheduler. PM has information on who schedules whom. As such, scheduling messages from user-land are sent through PM. An example is when processes change their priority, using nice(). In that case, a getsetpriority message is sent to PM, which then sends a SCHEDULING_SET_NICE to the process's effective scheduler. When a process is forked through PM, it inherits its parent's scheduler, but is spawned with an empty quantum. As before, a request to fork a process flows through VM before returning to PM, which then wakes up the child process. This flow has been modified slightly so that PM notifies the scheduler of the new process, before waking up the child process. If the scheduler fails to take over scheduling, the child process is torn down and the fork fails with an erroneous value. Process priority is entirely decided upon using nice levels. PM stores a copy of each process's nice level and when a child is forked, its parent's nice level is sent in the SCHEDULING_START message. How this level is mapped to a priority queue is up to the scheduler. It should be noted that the nice level is used to determine the max_priority and the parent could have been in a lower priority when it was spawned. To prevent a CPU intensive process from hawking the CPU by continuously forking children that get scheduled in the max_priority, the scheduler should determine in which queue the parent is currently scheduled, and schedule the child in that same queue. Other fixes: The USER_Q in kernel/proc.h was incorrectly defined as NR_SCHED_QUEUES/2. That results in a "off by one" error when converting priority->nice->priority for nice=0. This also had the side effect that if someone were to set the MAX_USER_Q to something else than 0, then USER_Q would be off.
2010-05-18 15:39:04 +02:00
* init_scheduling Called from main.c to set up/prepare scheduling
*/
#include "sched.h"
#include "schedproc.h"
#include <assert.h>
Scheduling server (by Bjorn Swift) In this second phase, scheduling is moved from PM to its own scheduler (see r6557 for phase one). In the next phase we hope to a) include useful information in the "out of quantum" message and b) create some simple scheduling policy that makes use of that information. When the system starts up, PM will iterate over its process table and ask SCHED to take over scheduling unprivileged processes. This is done by sending a SCHEDULING_START message to SCHED. This message includes the processes endpoint, the parent's endpoint and its nice level. The scheduler adds this process to its schedproc table, issues a schedctl, and returns its own endpoint to PM - as the endpoint of the effective scheduler. When a process terminates, a SCHEDULING_STOP message is sent to the scheduler. The reason for this effective endpoint is for future compatibility. Some day, we may have a scheduler that, instead of scheduling the process itself, forwards the SCHEDULING_START message on to another scheduler. PM has information on who schedules whom. As such, scheduling messages from user-land are sent through PM. An example is when processes change their priority, using nice(). In that case, a getsetpriority message is sent to PM, which then sends a SCHEDULING_SET_NICE to the process's effective scheduler. When a process is forked through PM, it inherits its parent's scheduler, but is spawned with an empty quantum. As before, a request to fork a process flows through VM before returning to PM, which then wakes up the child process. This flow has been modified slightly so that PM notifies the scheduler of the new process, before waking up the child process. If the scheduler fails to take over scheduling, the child process is torn down and the fork fails with an erroneous value. Process priority is entirely decided upon using nice levels. PM stores a copy of each process's nice level and when a child is forked, its parent's nice level is sent in the SCHEDULING_START message. How this level is mapped to a priority queue is up to the scheduler. It should be noted that the nice level is used to determine the max_priority and the parent could have been in a lower priority when it was spawned. To prevent a CPU intensive process from hawking the CPU by continuously forking children that get scheduled in the max_priority, the scheduler should determine in which queue the parent is currently scheduled, and schedule the child in that same queue. Other fixes: The USER_Q in kernel/proc.h was incorrectly defined as NR_SCHED_QUEUES/2. That results in a "off by one" error when converting priority->nice->priority for nice=0. This also had the side effect that if someone were to set the MAX_USER_Q to something else than 0, then USER_Q would be off.
2010-05-18 15:39:04 +02:00
#include <minix/com.h>
#include <machine/archtypes.h>
#include "kernel/proc.h" /* for queue constants */
static minix_timer_t sched_timer;
2012-03-25 20:25:53 +02:00
static unsigned balance_timeout;
Scheduling server (by Bjorn Swift) In this second phase, scheduling is moved from PM to its own scheduler (see r6557 for phase one). In the next phase we hope to a) include useful information in the "out of quantum" message and b) create some simple scheduling policy that makes use of that information. When the system starts up, PM will iterate over its process table and ask SCHED to take over scheduling unprivileged processes. This is done by sending a SCHEDULING_START message to SCHED. This message includes the processes endpoint, the parent's endpoint and its nice level. The scheduler adds this process to its schedproc table, issues a schedctl, and returns its own endpoint to PM - as the endpoint of the effective scheduler. When a process terminates, a SCHEDULING_STOP message is sent to the scheduler. The reason for this effective endpoint is for future compatibility. Some day, we may have a scheduler that, instead of scheduling the process itself, forwards the SCHEDULING_START message on to another scheduler. PM has information on who schedules whom. As such, scheduling messages from user-land are sent through PM. An example is when processes change their priority, using nice(). In that case, a getsetpriority message is sent to PM, which then sends a SCHEDULING_SET_NICE to the process's effective scheduler. When a process is forked through PM, it inherits its parent's scheduler, but is spawned with an empty quantum. As before, a request to fork a process flows through VM before returning to PM, which then wakes up the child process. This flow has been modified slightly so that PM notifies the scheduler of the new process, before waking up the child process. If the scheduler fails to take over scheduling, the child process is torn down and the fork fails with an erroneous value. Process priority is entirely decided upon using nice levels. PM stores a copy of each process's nice level and when a child is forked, its parent's nice level is sent in the SCHEDULING_START message. How this level is mapped to a priority queue is up to the scheduler. It should be noted that the nice level is used to determine the max_priority and the parent could have been in a lower priority when it was spawned. To prevent a CPU intensive process from hawking the CPU by continuously forking children that get scheduled in the max_priority, the scheduler should determine in which queue the parent is currently scheduled, and schedule the child in that same queue. Other fixes: The USER_Q in kernel/proc.h was incorrectly defined as NR_SCHED_QUEUES/2. That results in a "off by one" error when converting priority->nice->priority for nice=0. This also had the side effect that if someone were to set the MAX_USER_Q to something else than 0, then USER_Q would be off.
2010-05-18 15:39:04 +02:00
#define BALANCE_TIMEOUT 5 /* how often to balance queues in seconds */
2012-03-25 20:25:53 +02:00
static int schedule_process(struct schedproc * rmp, unsigned flags);
static void balance_queues(minix_timer_t *tp);
Scheduling server (by Bjorn Swift) In this second phase, scheduling is moved from PM to its own scheduler (see r6557 for phase one). In the next phase we hope to a) include useful information in the "out of quantum" message and b) create some simple scheduling policy that makes use of that information. When the system starts up, PM will iterate over its process table and ask SCHED to take over scheduling unprivileged processes. This is done by sending a SCHEDULING_START message to SCHED. This message includes the processes endpoint, the parent's endpoint and its nice level. The scheduler adds this process to its schedproc table, issues a schedctl, and returns its own endpoint to PM - as the endpoint of the effective scheduler. When a process terminates, a SCHEDULING_STOP message is sent to the scheduler. The reason for this effective endpoint is for future compatibility. Some day, we may have a scheduler that, instead of scheduling the process itself, forwards the SCHEDULING_START message on to another scheduler. PM has information on who schedules whom. As such, scheduling messages from user-land are sent through PM. An example is when processes change their priority, using nice(). In that case, a getsetpriority message is sent to PM, which then sends a SCHEDULING_SET_NICE to the process's effective scheduler. When a process is forked through PM, it inherits its parent's scheduler, but is spawned with an empty quantum. As before, a request to fork a process flows through VM before returning to PM, which then wakes up the child process. This flow has been modified slightly so that PM notifies the scheduler of the new process, before waking up the child process. If the scheduler fails to take over scheduling, the child process is torn down and the fork fails with an erroneous value. Process priority is entirely decided upon using nice levels. PM stores a copy of each process's nice level and when a child is forked, its parent's nice level is sent in the SCHEDULING_START message. How this level is mapped to a priority queue is up to the scheduler. It should be noted that the nice level is used to determine the max_priority and the parent could have been in a lower priority when it was spawned. To prevent a CPU intensive process from hawking the CPU by continuously forking children that get scheduled in the max_priority, the scheduler should determine in which queue the parent is currently scheduled, and schedule the child in that same queue. Other fixes: The USER_Q in kernel/proc.h was incorrectly defined as NR_SCHED_QUEUES/2. That results in a "off by one" error when converting priority->nice->priority for nice=0. This also had the side effect that if someone were to set the MAX_USER_Q to something else than 0, then USER_Q would be off.
2010-05-18 15:39:04 +02:00
#define SCHEDULE_CHANGE_PRIO 0x1
#define SCHEDULE_CHANGE_QUANTUM 0x2
#define SCHEDULE_CHANGE_CPU 0x4
#define SCHEDULE_CHANGE_ALL ( \
SCHEDULE_CHANGE_PRIO | \
SCHEDULE_CHANGE_QUANTUM | \
SCHEDULE_CHANGE_CPU \
)
#define schedule_process_local(p) \
schedule_process(p, SCHEDULE_CHANGE_PRIO | SCHEDULE_CHANGE_QUANTUM)
#define schedule_process_migrate(p) \
schedule_process(p, SCHEDULE_CHANGE_CPU)
#define CPU_DEAD -1
#define cpu_is_available(c) (cpu_proc[c] >= 0)
2010-05-26 09:16:39 +02:00
#define DEFAULT_USER_TIME_SLICE 200
Scheduling server (by Bjorn Swift) In this second phase, scheduling is moved from PM to its own scheduler (see r6557 for phase one). In the next phase we hope to a) include useful information in the "out of quantum" message and b) create some simple scheduling policy that makes use of that information. When the system starts up, PM will iterate over its process table and ask SCHED to take over scheduling unprivileged processes. This is done by sending a SCHEDULING_START message to SCHED. This message includes the processes endpoint, the parent's endpoint and its nice level. The scheduler adds this process to its schedproc table, issues a schedctl, and returns its own endpoint to PM - as the endpoint of the effective scheduler. When a process terminates, a SCHEDULING_STOP message is sent to the scheduler. The reason for this effective endpoint is for future compatibility. Some day, we may have a scheduler that, instead of scheduling the process itself, forwards the SCHEDULING_START message on to another scheduler. PM has information on who schedules whom. As such, scheduling messages from user-land are sent through PM. An example is when processes change their priority, using nice(). In that case, a getsetpriority message is sent to PM, which then sends a SCHEDULING_SET_NICE to the process's effective scheduler. When a process is forked through PM, it inherits its parent's scheduler, but is spawned with an empty quantum. As before, a request to fork a process flows through VM before returning to PM, which then wakes up the child process. This flow has been modified slightly so that PM notifies the scheduler of the new process, before waking up the child process. If the scheduler fails to take over scheduling, the child process is torn down and the fork fails with an erroneous value. Process priority is entirely decided upon using nice levels. PM stores a copy of each process's nice level and when a child is forked, its parent's nice level is sent in the SCHEDULING_START message. How this level is mapped to a priority queue is up to the scheduler. It should be noted that the nice level is used to determine the max_priority and the parent could have been in a lower priority when it was spawned. To prevent a CPU intensive process from hawking the CPU by continuously forking children that get scheduled in the max_priority, the scheduler should determine in which queue the parent is currently scheduled, and schedule the child in that same queue. Other fixes: The USER_Q in kernel/proc.h was incorrectly defined as NR_SCHED_QUEUES/2. That results in a "off by one" error when converting priority->nice->priority for nice=0. This also had the side effect that if someone were to set the MAX_USER_Q to something else than 0, then USER_Q would be off.
2010-05-18 15:39:04 +02:00
/* processes created by RS are sysytem processes */
#define is_system_proc(p) ((p)->parent == RS_PROC_NR)
2012-03-25 20:25:53 +02:00
static unsigned cpu_proc[CONFIG_MAX_CPUS];
2012-03-25 20:25:53 +02:00
static void pick_cpu(struct schedproc * proc)
{
#ifdef CONFIG_SMP
unsigned cpu, c;
unsigned cpu_load = (unsigned) -1;
if (machine.processors_count == 1) {
proc->cpu = machine.bsp_id;
return;
}
/* schedule sysytem processes only on the boot cpu */
if (is_system_proc(proc)) {
proc->cpu = machine.bsp_id;
return;
}
/* if no other cpu available, try BSP */
cpu = machine.bsp_id;
for (c = 0; c < machine.processors_count; c++) {
/* skip dead cpus */
if (!cpu_is_available(c))
continue;
if (c != machine.bsp_id && cpu_load > cpu_proc[c]) {
cpu_load = cpu_proc[c];
cpu = c;
}
}
proc->cpu = cpu;
cpu_proc[cpu]++;
#else
proc->cpu = 0;
#endif
}
Scheduling server (by Bjorn Swift) In this second phase, scheduling is moved from PM to its own scheduler (see r6557 for phase one). In the next phase we hope to a) include useful information in the "out of quantum" message and b) create some simple scheduling policy that makes use of that information. When the system starts up, PM will iterate over its process table and ask SCHED to take over scheduling unprivileged processes. This is done by sending a SCHEDULING_START message to SCHED. This message includes the processes endpoint, the parent's endpoint and its nice level. The scheduler adds this process to its schedproc table, issues a schedctl, and returns its own endpoint to PM - as the endpoint of the effective scheduler. When a process terminates, a SCHEDULING_STOP message is sent to the scheduler. The reason for this effective endpoint is for future compatibility. Some day, we may have a scheduler that, instead of scheduling the process itself, forwards the SCHEDULING_START message on to another scheduler. PM has information on who schedules whom. As such, scheduling messages from user-land are sent through PM. An example is when processes change their priority, using nice(). In that case, a getsetpriority message is sent to PM, which then sends a SCHEDULING_SET_NICE to the process's effective scheduler. When a process is forked through PM, it inherits its parent's scheduler, but is spawned with an empty quantum. As before, a request to fork a process flows through VM before returning to PM, which then wakes up the child process. This flow has been modified slightly so that PM notifies the scheduler of the new process, before waking up the child process. If the scheduler fails to take over scheduling, the child process is torn down and the fork fails with an erroneous value. Process priority is entirely decided upon using nice levels. PM stores a copy of each process's nice level and when a child is forked, its parent's nice level is sent in the SCHEDULING_START message. How this level is mapped to a priority queue is up to the scheduler. It should be noted that the nice level is used to determine the max_priority and the parent could have been in a lower priority when it was spawned. To prevent a CPU intensive process from hawking the CPU by continuously forking children that get scheduled in the max_priority, the scheduler should determine in which queue the parent is currently scheduled, and schedule the child in that same queue. Other fixes: The USER_Q in kernel/proc.h was incorrectly defined as NR_SCHED_QUEUES/2. That results in a "off by one" error when converting priority->nice->priority for nice=0. This also had the side effect that if someone were to set the MAX_USER_Q to something else than 0, then USER_Q would be off.
2010-05-18 15:39:04 +02:00
/*===========================================================================*
* do_noquantum *
*===========================================================================*/
2012-03-25 20:25:53 +02:00
int do_noquantum(message *m_ptr)
Scheduling server (by Bjorn Swift) In this second phase, scheduling is moved from PM to its own scheduler (see r6557 for phase one). In the next phase we hope to a) include useful information in the "out of quantum" message and b) create some simple scheduling policy that makes use of that information. When the system starts up, PM will iterate over its process table and ask SCHED to take over scheduling unprivileged processes. This is done by sending a SCHEDULING_START message to SCHED. This message includes the processes endpoint, the parent's endpoint and its nice level. The scheduler adds this process to its schedproc table, issues a schedctl, and returns its own endpoint to PM - as the endpoint of the effective scheduler. When a process terminates, a SCHEDULING_STOP message is sent to the scheduler. The reason for this effective endpoint is for future compatibility. Some day, we may have a scheduler that, instead of scheduling the process itself, forwards the SCHEDULING_START message on to another scheduler. PM has information on who schedules whom. As such, scheduling messages from user-land are sent through PM. An example is when processes change their priority, using nice(). In that case, a getsetpriority message is sent to PM, which then sends a SCHEDULING_SET_NICE to the process's effective scheduler. When a process is forked through PM, it inherits its parent's scheduler, but is spawned with an empty quantum. As before, a request to fork a process flows through VM before returning to PM, which then wakes up the child process. This flow has been modified slightly so that PM notifies the scheduler of the new process, before waking up the child process. If the scheduler fails to take over scheduling, the child process is torn down and the fork fails with an erroneous value. Process priority is entirely decided upon using nice levels. PM stores a copy of each process's nice level and when a child is forked, its parent's nice level is sent in the SCHEDULING_START message. How this level is mapped to a priority queue is up to the scheduler. It should be noted that the nice level is used to determine the max_priority and the parent could have been in a lower priority when it was spawned. To prevent a CPU intensive process from hawking the CPU by continuously forking children that get scheduled in the max_priority, the scheduler should determine in which queue the parent is currently scheduled, and schedule the child in that same queue. Other fixes: The USER_Q in kernel/proc.h was incorrectly defined as NR_SCHED_QUEUES/2. That results in a "off by one" error when converting priority->nice->priority for nice=0. This also had the side effect that if someone were to set the MAX_USER_Q to something else than 0, then USER_Q would be off.
2010-05-18 15:39:04 +02:00
{
register struct schedproc *rmp;
int rv, proc_nr_n;
if (sched_isokendpt(m_ptr->m_source, &proc_nr_n) != OK) {
printf("SCHED: WARNING: got an invalid endpoint in OOQ msg %u.\n",
m_ptr->m_source);
2010-06-24 09:37:26 +02:00
return EBADEPT;
Scheduling server (by Bjorn Swift) In this second phase, scheduling is moved from PM to its own scheduler (see r6557 for phase one). In the next phase we hope to a) include useful information in the "out of quantum" message and b) create some simple scheduling policy that makes use of that information. When the system starts up, PM will iterate over its process table and ask SCHED to take over scheduling unprivileged processes. This is done by sending a SCHEDULING_START message to SCHED. This message includes the processes endpoint, the parent's endpoint and its nice level. The scheduler adds this process to its schedproc table, issues a schedctl, and returns its own endpoint to PM - as the endpoint of the effective scheduler. When a process terminates, a SCHEDULING_STOP message is sent to the scheduler. The reason for this effective endpoint is for future compatibility. Some day, we may have a scheduler that, instead of scheduling the process itself, forwards the SCHEDULING_START message on to another scheduler. PM has information on who schedules whom. As such, scheduling messages from user-land are sent through PM. An example is when processes change their priority, using nice(). In that case, a getsetpriority message is sent to PM, which then sends a SCHEDULING_SET_NICE to the process's effective scheduler. When a process is forked through PM, it inherits its parent's scheduler, but is spawned with an empty quantum. As before, a request to fork a process flows through VM before returning to PM, which then wakes up the child process. This flow has been modified slightly so that PM notifies the scheduler of the new process, before waking up the child process. If the scheduler fails to take over scheduling, the child process is torn down and the fork fails with an erroneous value. Process priority is entirely decided upon using nice levels. PM stores a copy of each process's nice level and when a child is forked, its parent's nice level is sent in the SCHEDULING_START message. How this level is mapped to a priority queue is up to the scheduler. It should be noted that the nice level is used to determine the max_priority and the parent could have been in a lower priority when it was spawned. To prevent a CPU intensive process from hawking the CPU by continuously forking children that get scheduled in the max_priority, the scheduler should determine in which queue the parent is currently scheduled, and schedule the child in that same queue. Other fixes: The USER_Q in kernel/proc.h was incorrectly defined as NR_SCHED_QUEUES/2. That results in a "off by one" error when converting priority->nice->priority for nice=0. This also had the side effect that if someone were to set the MAX_USER_Q to something else than 0, then USER_Q would be off.
2010-05-18 15:39:04 +02:00
}
rmp = &schedproc[proc_nr_n];
if (rmp->priority < MIN_USER_Q) {
rmp->priority += 1; /* lower priority */
}
if ((rv = schedule_process_local(rmp)) != OK) {
Scheduling server (by Bjorn Swift) In this second phase, scheduling is moved from PM to its own scheduler (see r6557 for phase one). In the next phase we hope to a) include useful information in the "out of quantum" message and b) create some simple scheduling policy that makes use of that information. When the system starts up, PM will iterate over its process table and ask SCHED to take over scheduling unprivileged processes. This is done by sending a SCHEDULING_START message to SCHED. This message includes the processes endpoint, the parent's endpoint and its nice level. The scheduler adds this process to its schedproc table, issues a schedctl, and returns its own endpoint to PM - as the endpoint of the effective scheduler. When a process terminates, a SCHEDULING_STOP message is sent to the scheduler. The reason for this effective endpoint is for future compatibility. Some day, we may have a scheduler that, instead of scheduling the process itself, forwards the SCHEDULING_START message on to another scheduler. PM has information on who schedules whom. As such, scheduling messages from user-land are sent through PM. An example is when processes change their priority, using nice(). In that case, a getsetpriority message is sent to PM, which then sends a SCHEDULING_SET_NICE to the process's effective scheduler. When a process is forked through PM, it inherits its parent's scheduler, but is spawned with an empty quantum. As before, a request to fork a process flows through VM before returning to PM, which then wakes up the child process. This flow has been modified slightly so that PM notifies the scheduler of the new process, before waking up the child process. If the scheduler fails to take over scheduling, the child process is torn down and the fork fails with an erroneous value. Process priority is entirely decided upon using nice levels. PM stores a copy of each process's nice level and when a child is forked, its parent's nice level is sent in the SCHEDULING_START message. How this level is mapped to a priority queue is up to the scheduler. It should be noted that the nice level is used to determine the max_priority and the parent could have been in a lower priority when it was spawned. To prevent a CPU intensive process from hawking the CPU by continuously forking children that get scheduled in the max_priority, the scheduler should determine in which queue the parent is currently scheduled, and schedule the child in that same queue. Other fixes: The USER_Q in kernel/proc.h was incorrectly defined as NR_SCHED_QUEUES/2. That results in a "off by one" error when converting priority->nice->priority for nice=0. This also had the side effect that if someone were to set the MAX_USER_Q to something else than 0, then USER_Q would be off.
2010-05-18 15:39:04 +02:00
return rv;
}
return OK;
}
/*===========================================================================*
* do_stop_scheduling *
*===========================================================================*/
2012-03-25 20:25:53 +02:00
int do_stop_scheduling(message *m_ptr)
Scheduling server (by Bjorn Swift) In this second phase, scheduling is moved from PM to its own scheduler (see r6557 for phase one). In the next phase we hope to a) include useful information in the "out of quantum" message and b) create some simple scheduling policy that makes use of that information. When the system starts up, PM will iterate over its process table and ask SCHED to take over scheduling unprivileged processes. This is done by sending a SCHEDULING_START message to SCHED. This message includes the processes endpoint, the parent's endpoint and its nice level. The scheduler adds this process to its schedproc table, issues a schedctl, and returns its own endpoint to PM - as the endpoint of the effective scheduler. When a process terminates, a SCHEDULING_STOP message is sent to the scheduler. The reason for this effective endpoint is for future compatibility. Some day, we may have a scheduler that, instead of scheduling the process itself, forwards the SCHEDULING_START message on to another scheduler. PM has information on who schedules whom. As such, scheduling messages from user-land are sent through PM. An example is when processes change their priority, using nice(). In that case, a getsetpriority message is sent to PM, which then sends a SCHEDULING_SET_NICE to the process's effective scheduler. When a process is forked through PM, it inherits its parent's scheduler, but is spawned with an empty quantum. As before, a request to fork a process flows through VM before returning to PM, which then wakes up the child process. This flow has been modified slightly so that PM notifies the scheduler of the new process, before waking up the child process. If the scheduler fails to take over scheduling, the child process is torn down and the fork fails with an erroneous value. Process priority is entirely decided upon using nice levels. PM stores a copy of each process's nice level and when a child is forked, its parent's nice level is sent in the SCHEDULING_START message. How this level is mapped to a priority queue is up to the scheduler. It should be noted that the nice level is used to determine the max_priority and the parent could have been in a lower priority when it was spawned. To prevent a CPU intensive process from hawking the CPU by continuously forking children that get scheduled in the max_priority, the scheduler should determine in which queue the parent is currently scheduled, and schedule the child in that same queue. Other fixes: The USER_Q in kernel/proc.h was incorrectly defined as NR_SCHED_QUEUES/2. That results in a "off by one" error when converting priority->nice->priority for nice=0. This also had the side effect that if someone were to set the MAX_USER_Q to something else than 0, then USER_Q would be off.
2010-05-18 15:39:04 +02:00
{
register struct schedproc *rmp;
int proc_nr_n;
Scheduling server (by Bjorn Swift) In this second phase, scheduling is moved from PM to its own scheduler (see r6557 for phase one). In the next phase we hope to a) include useful information in the "out of quantum" message and b) create some simple scheduling policy that makes use of that information. When the system starts up, PM will iterate over its process table and ask SCHED to take over scheduling unprivileged processes. This is done by sending a SCHEDULING_START message to SCHED. This message includes the processes endpoint, the parent's endpoint and its nice level. The scheduler adds this process to its schedproc table, issues a schedctl, and returns its own endpoint to PM - as the endpoint of the effective scheduler. When a process terminates, a SCHEDULING_STOP message is sent to the scheduler. The reason for this effective endpoint is for future compatibility. Some day, we may have a scheduler that, instead of scheduling the process itself, forwards the SCHEDULING_START message on to another scheduler. PM has information on who schedules whom. As such, scheduling messages from user-land are sent through PM. An example is when processes change their priority, using nice(). In that case, a getsetpriority message is sent to PM, which then sends a SCHEDULING_SET_NICE to the process's effective scheduler. When a process is forked through PM, it inherits its parent's scheduler, but is spawned with an empty quantum. As before, a request to fork a process flows through VM before returning to PM, which then wakes up the child process. This flow has been modified slightly so that PM notifies the scheduler of the new process, before waking up the child process. If the scheduler fails to take over scheduling, the child process is torn down and the fork fails with an erroneous value. Process priority is entirely decided upon using nice levels. PM stores a copy of each process's nice level and when a child is forked, its parent's nice level is sent in the SCHEDULING_START message. How this level is mapped to a priority queue is up to the scheduler. It should be noted that the nice level is used to determine the max_priority and the parent could have been in a lower priority when it was spawned. To prevent a CPU intensive process from hawking the CPU by continuously forking children that get scheduled in the max_priority, the scheduler should determine in which queue the parent is currently scheduled, and schedule the child in that same queue. Other fixes: The USER_Q in kernel/proc.h was incorrectly defined as NR_SCHED_QUEUES/2. That results in a "off by one" error when converting priority->nice->priority for nice=0. This also had the side effect that if someone were to set the MAX_USER_Q to something else than 0, then USER_Q would be off.
2010-05-18 15:39:04 +02:00
/* check who can send you requests */
if (!accept_message(m_ptr))
Scheduling server (by Bjorn Swift) In this second phase, scheduling is moved from PM to its own scheduler (see r6557 for phase one). In the next phase we hope to a) include useful information in the "out of quantum" message and b) create some simple scheduling policy that makes use of that information. When the system starts up, PM will iterate over its process table and ask SCHED to take over scheduling unprivileged processes. This is done by sending a SCHEDULING_START message to SCHED. This message includes the processes endpoint, the parent's endpoint and its nice level. The scheduler adds this process to its schedproc table, issues a schedctl, and returns its own endpoint to PM - as the endpoint of the effective scheduler. When a process terminates, a SCHEDULING_STOP message is sent to the scheduler. The reason for this effective endpoint is for future compatibility. Some day, we may have a scheduler that, instead of scheduling the process itself, forwards the SCHEDULING_START message on to another scheduler. PM has information on who schedules whom. As such, scheduling messages from user-land are sent through PM. An example is when processes change their priority, using nice(). In that case, a getsetpriority message is sent to PM, which then sends a SCHEDULING_SET_NICE to the process's effective scheduler. When a process is forked through PM, it inherits its parent's scheduler, but is spawned with an empty quantum. As before, a request to fork a process flows through VM before returning to PM, which then wakes up the child process. This flow has been modified slightly so that PM notifies the scheduler of the new process, before waking up the child process. If the scheduler fails to take over scheduling, the child process is torn down and the fork fails with an erroneous value. Process priority is entirely decided upon using nice levels. PM stores a copy of each process's nice level and when a child is forked, its parent's nice level is sent in the SCHEDULING_START message. How this level is mapped to a priority queue is up to the scheduler. It should be noted that the nice level is used to determine the max_priority and the parent could have been in a lower priority when it was spawned. To prevent a CPU intensive process from hawking the CPU by continuously forking children that get scheduled in the max_priority, the scheduler should determine in which queue the parent is currently scheduled, and schedule the child in that same queue. Other fixes: The USER_Q in kernel/proc.h was incorrectly defined as NR_SCHED_QUEUES/2. That results in a "off by one" error when converting priority->nice->priority for nice=0. This also had the side effect that if someone were to set the MAX_USER_Q to something else than 0, then USER_Q would be off.
2010-05-18 15:39:04 +02:00
return EPERM;
if (sched_isokendpt(m_ptr->m_lsys_sched_scheduling_stop.endpoint,
&proc_nr_n) != OK) {
2010-07-02 14:41:19 +02:00
printf("SCHED: WARNING: got an invalid endpoint in OOQ msg "
"%d\n", m_ptr->m_lsys_sched_scheduling_stop.endpoint);
2010-06-24 09:37:26 +02:00
return EBADEPT;
Scheduling server (by Bjorn Swift) In this second phase, scheduling is moved from PM to its own scheduler (see r6557 for phase one). In the next phase we hope to a) include useful information in the "out of quantum" message and b) create some simple scheduling policy that makes use of that information. When the system starts up, PM will iterate over its process table and ask SCHED to take over scheduling unprivileged processes. This is done by sending a SCHEDULING_START message to SCHED. This message includes the processes endpoint, the parent's endpoint and its nice level. The scheduler adds this process to its schedproc table, issues a schedctl, and returns its own endpoint to PM - as the endpoint of the effective scheduler. When a process terminates, a SCHEDULING_STOP message is sent to the scheduler. The reason for this effective endpoint is for future compatibility. Some day, we may have a scheduler that, instead of scheduling the process itself, forwards the SCHEDULING_START message on to another scheduler. PM has information on who schedules whom. As such, scheduling messages from user-land are sent through PM. An example is when processes change their priority, using nice(). In that case, a getsetpriority message is sent to PM, which then sends a SCHEDULING_SET_NICE to the process's effective scheduler. When a process is forked through PM, it inherits its parent's scheduler, but is spawned with an empty quantum. As before, a request to fork a process flows through VM before returning to PM, which then wakes up the child process. This flow has been modified slightly so that PM notifies the scheduler of the new process, before waking up the child process. If the scheduler fails to take over scheduling, the child process is torn down and the fork fails with an erroneous value. Process priority is entirely decided upon using nice levels. PM stores a copy of each process's nice level and when a child is forked, its parent's nice level is sent in the SCHEDULING_START message. How this level is mapped to a priority queue is up to the scheduler. It should be noted that the nice level is used to determine the max_priority and the parent could have been in a lower priority when it was spawned. To prevent a CPU intensive process from hawking the CPU by continuously forking children that get scheduled in the max_priority, the scheduler should determine in which queue the parent is currently scheduled, and schedule the child in that same queue. Other fixes: The USER_Q in kernel/proc.h was incorrectly defined as NR_SCHED_QUEUES/2. That results in a "off by one" error when converting priority->nice->priority for nice=0. This also had the side effect that if someone were to set the MAX_USER_Q to something else than 0, then USER_Q would be off.
2010-05-18 15:39:04 +02:00
}
rmp = &schedproc[proc_nr_n];
#ifdef CONFIG_SMP
cpu_proc[rmp->cpu]--;
#endif
Scheduling server (by Bjorn Swift) In this second phase, scheduling is moved from PM to its own scheduler (see r6557 for phase one). In the next phase we hope to a) include useful information in the "out of quantum" message and b) create some simple scheduling policy that makes use of that information. When the system starts up, PM will iterate over its process table and ask SCHED to take over scheduling unprivileged processes. This is done by sending a SCHEDULING_START message to SCHED. This message includes the processes endpoint, the parent's endpoint and its nice level. The scheduler adds this process to its schedproc table, issues a schedctl, and returns its own endpoint to PM - as the endpoint of the effective scheduler. When a process terminates, a SCHEDULING_STOP message is sent to the scheduler. The reason for this effective endpoint is for future compatibility. Some day, we may have a scheduler that, instead of scheduling the process itself, forwards the SCHEDULING_START message on to another scheduler. PM has information on who schedules whom. As such, scheduling messages from user-land are sent through PM. An example is when processes change their priority, using nice(). In that case, a getsetpriority message is sent to PM, which then sends a SCHEDULING_SET_NICE to the process's effective scheduler. When a process is forked through PM, it inherits its parent's scheduler, but is spawned with an empty quantum. As before, a request to fork a process flows through VM before returning to PM, which then wakes up the child process. This flow has been modified slightly so that PM notifies the scheduler of the new process, before waking up the child process. If the scheduler fails to take over scheduling, the child process is torn down and the fork fails with an erroneous value. Process priority is entirely decided upon using nice levels. PM stores a copy of each process's nice level and when a child is forked, its parent's nice level is sent in the SCHEDULING_START message. How this level is mapped to a priority queue is up to the scheduler. It should be noted that the nice level is used to determine the max_priority and the parent could have been in a lower priority when it was spawned. To prevent a CPU intensive process from hawking the CPU by continuously forking children that get scheduled in the max_priority, the scheduler should determine in which queue the parent is currently scheduled, and schedule the child in that same queue. Other fixes: The USER_Q in kernel/proc.h was incorrectly defined as NR_SCHED_QUEUES/2. That results in a "off by one" error when converting priority->nice->priority for nice=0. This also had the side effect that if someone were to set the MAX_USER_Q to something else than 0, then USER_Q would be off.
2010-05-18 15:39:04 +02:00
rmp->flags = 0; /*&= ~IN_USE;*/
return OK;
}
/*===========================================================================*
* do_start_scheduling *
*===========================================================================*/
2012-03-25 20:25:53 +02:00
int do_start_scheduling(message *m_ptr)
Scheduling server (by Bjorn Swift) In this second phase, scheduling is moved from PM to its own scheduler (see r6557 for phase one). In the next phase we hope to a) include useful information in the "out of quantum" message and b) create some simple scheduling policy that makes use of that information. When the system starts up, PM will iterate over its process table and ask SCHED to take over scheduling unprivileged processes. This is done by sending a SCHEDULING_START message to SCHED. This message includes the processes endpoint, the parent's endpoint and its nice level. The scheduler adds this process to its schedproc table, issues a schedctl, and returns its own endpoint to PM - as the endpoint of the effective scheduler. When a process terminates, a SCHEDULING_STOP message is sent to the scheduler. The reason for this effective endpoint is for future compatibility. Some day, we may have a scheduler that, instead of scheduling the process itself, forwards the SCHEDULING_START message on to another scheduler. PM has information on who schedules whom. As such, scheduling messages from user-land are sent through PM. An example is when processes change their priority, using nice(). In that case, a getsetpriority message is sent to PM, which then sends a SCHEDULING_SET_NICE to the process's effective scheduler. When a process is forked through PM, it inherits its parent's scheduler, but is spawned with an empty quantum. As before, a request to fork a process flows through VM before returning to PM, which then wakes up the child process. This flow has been modified slightly so that PM notifies the scheduler of the new process, before waking up the child process. If the scheduler fails to take over scheduling, the child process is torn down and the fork fails with an erroneous value. Process priority is entirely decided upon using nice levels. PM stores a copy of each process's nice level and when a child is forked, its parent's nice level is sent in the SCHEDULING_START message. How this level is mapped to a priority queue is up to the scheduler. It should be noted that the nice level is used to determine the max_priority and the parent could have been in a lower priority when it was spawned. To prevent a CPU intensive process from hawking the CPU by continuously forking children that get scheduled in the max_priority, the scheduler should determine in which queue the parent is currently scheduled, and schedule the child in that same queue. Other fixes: The USER_Q in kernel/proc.h was incorrectly defined as NR_SCHED_QUEUES/2. That results in a "off by one" error when converting priority->nice->priority for nice=0. This also had the side effect that if someone were to set the MAX_USER_Q to something else than 0, then USER_Q would be off.
2010-05-18 15:39:04 +02:00
{
register struct schedproc *rmp;
int rv, proc_nr_n, parent_nr_n;
/* we can handle two kinds of messages here */
assert(m_ptr->m_type == SCHEDULING_START ||
m_ptr->m_type == SCHEDULING_INHERIT);
Scheduling server (by Bjorn Swift) In this second phase, scheduling is moved from PM to its own scheduler (see r6557 for phase one). In the next phase we hope to a) include useful information in the "out of quantum" message and b) create some simple scheduling policy that makes use of that information. When the system starts up, PM will iterate over its process table and ask SCHED to take over scheduling unprivileged processes. This is done by sending a SCHEDULING_START message to SCHED. This message includes the processes endpoint, the parent's endpoint and its nice level. The scheduler adds this process to its schedproc table, issues a schedctl, and returns its own endpoint to PM - as the endpoint of the effective scheduler. When a process terminates, a SCHEDULING_STOP message is sent to the scheduler. The reason for this effective endpoint is for future compatibility. Some day, we may have a scheduler that, instead of scheduling the process itself, forwards the SCHEDULING_START message on to another scheduler. PM has information on who schedules whom. As such, scheduling messages from user-land are sent through PM. An example is when processes change their priority, using nice(). In that case, a getsetpriority message is sent to PM, which then sends a SCHEDULING_SET_NICE to the process's effective scheduler. When a process is forked through PM, it inherits its parent's scheduler, but is spawned with an empty quantum. As before, a request to fork a process flows through VM before returning to PM, which then wakes up the child process. This flow has been modified slightly so that PM notifies the scheduler of the new process, before waking up the child process. If the scheduler fails to take over scheduling, the child process is torn down and the fork fails with an erroneous value. Process priority is entirely decided upon using nice levels. PM stores a copy of each process's nice level and when a child is forked, its parent's nice level is sent in the SCHEDULING_START message. How this level is mapped to a priority queue is up to the scheduler. It should be noted that the nice level is used to determine the max_priority and the parent could have been in a lower priority when it was spawned. To prevent a CPU intensive process from hawking the CPU by continuously forking children that get scheduled in the max_priority, the scheduler should determine in which queue the parent is currently scheduled, and schedule the child in that same queue. Other fixes: The USER_Q in kernel/proc.h was incorrectly defined as NR_SCHED_QUEUES/2. That results in a "off by one" error when converting priority->nice->priority for nice=0. This also had the side effect that if someone were to set the MAX_USER_Q to something else than 0, then USER_Q would be off.
2010-05-18 15:39:04 +02:00
/* check who can send you requests */
if (!accept_message(m_ptr))
Scheduling server (by Bjorn Swift) In this second phase, scheduling is moved from PM to its own scheduler (see r6557 for phase one). In the next phase we hope to a) include useful information in the "out of quantum" message and b) create some simple scheduling policy that makes use of that information. When the system starts up, PM will iterate over its process table and ask SCHED to take over scheduling unprivileged processes. This is done by sending a SCHEDULING_START message to SCHED. This message includes the processes endpoint, the parent's endpoint and its nice level. The scheduler adds this process to its schedproc table, issues a schedctl, and returns its own endpoint to PM - as the endpoint of the effective scheduler. When a process terminates, a SCHEDULING_STOP message is sent to the scheduler. The reason for this effective endpoint is for future compatibility. Some day, we may have a scheduler that, instead of scheduling the process itself, forwards the SCHEDULING_START message on to another scheduler. PM has information on who schedules whom. As such, scheduling messages from user-land are sent through PM. An example is when processes change their priority, using nice(). In that case, a getsetpriority message is sent to PM, which then sends a SCHEDULING_SET_NICE to the process's effective scheduler. When a process is forked through PM, it inherits its parent's scheduler, but is spawned with an empty quantum. As before, a request to fork a process flows through VM before returning to PM, which then wakes up the child process. This flow has been modified slightly so that PM notifies the scheduler of the new process, before waking up the child process. If the scheduler fails to take over scheduling, the child process is torn down and the fork fails with an erroneous value. Process priority is entirely decided upon using nice levels. PM stores a copy of each process's nice level and when a child is forked, its parent's nice level is sent in the SCHEDULING_START message. How this level is mapped to a priority queue is up to the scheduler. It should be noted that the nice level is used to determine the max_priority and the parent could have been in a lower priority when it was spawned. To prevent a CPU intensive process from hawking the CPU by continuously forking children that get scheduled in the max_priority, the scheduler should determine in which queue the parent is currently scheduled, and schedule the child in that same queue. Other fixes: The USER_Q in kernel/proc.h was incorrectly defined as NR_SCHED_QUEUES/2. That results in a "off by one" error when converting priority->nice->priority for nice=0. This also had the side effect that if someone were to set the MAX_USER_Q to something else than 0, then USER_Q would be off.
2010-05-18 15:39:04 +02:00
return EPERM;
/* Resolve endpoint to proc slot. */
if ((rv = sched_isemtyendpt(m_ptr->m_lsys_sched_scheduling_start.endpoint,
&proc_nr_n)) != OK) {
Scheduling server (by Bjorn Swift) In this second phase, scheduling is moved from PM to its own scheduler (see r6557 for phase one). In the next phase we hope to a) include useful information in the "out of quantum" message and b) create some simple scheduling policy that makes use of that information. When the system starts up, PM will iterate over its process table and ask SCHED to take over scheduling unprivileged processes. This is done by sending a SCHEDULING_START message to SCHED. This message includes the processes endpoint, the parent's endpoint and its nice level. The scheduler adds this process to its schedproc table, issues a schedctl, and returns its own endpoint to PM - as the endpoint of the effective scheduler. When a process terminates, a SCHEDULING_STOP message is sent to the scheduler. The reason for this effective endpoint is for future compatibility. Some day, we may have a scheduler that, instead of scheduling the process itself, forwards the SCHEDULING_START message on to another scheduler. PM has information on who schedules whom. As such, scheduling messages from user-land are sent through PM. An example is when processes change their priority, using nice(). In that case, a getsetpriority message is sent to PM, which then sends a SCHEDULING_SET_NICE to the process's effective scheduler. When a process is forked through PM, it inherits its parent's scheduler, but is spawned with an empty quantum. As before, a request to fork a process flows through VM before returning to PM, which then wakes up the child process. This flow has been modified slightly so that PM notifies the scheduler of the new process, before waking up the child process. If the scheduler fails to take over scheduling, the child process is torn down and the fork fails with an erroneous value. Process priority is entirely decided upon using nice levels. PM stores a copy of each process's nice level and when a child is forked, its parent's nice level is sent in the SCHEDULING_START message. How this level is mapped to a priority queue is up to the scheduler. It should be noted that the nice level is used to determine the max_priority and the parent could have been in a lower priority when it was spawned. To prevent a CPU intensive process from hawking the CPU by continuously forking children that get scheduled in the max_priority, the scheduler should determine in which queue the parent is currently scheduled, and schedule the child in that same queue. Other fixes: The USER_Q in kernel/proc.h was incorrectly defined as NR_SCHED_QUEUES/2. That results in a "off by one" error when converting priority->nice->priority for nice=0. This also had the side effect that if someone were to set the MAX_USER_Q to something else than 0, then USER_Q would be off.
2010-05-18 15:39:04 +02:00
return rv;
}
rmp = &schedproc[proc_nr_n];
/* Populate process slot */
rmp->endpoint = m_ptr->m_lsys_sched_scheduling_start.endpoint;
rmp->parent = m_ptr->m_lsys_sched_scheduling_start.parent;
rmp->max_priority = m_ptr->m_lsys_sched_scheduling_start.maxprio;
if (rmp->max_priority >= NR_SCHED_QUEUES) {
return EINVAL;
Scheduling server (by Bjorn Swift) In this second phase, scheduling is moved from PM to its own scheduler (see r6557 for phase one). In the next phase we hope to a) include useful information in the "out of quantum" message and b) create some simple scheduling policy that makes use of that information. When the system starts up, PM will iterate over its process table and ask SCHED to take over scheduling unprivileged processes. This is done by sending a SCHEDULING_START message to SCHED. This message includes the processes endpoint, the parent's endpoint and its nice level. The scheduler adds this process to its schedproc table, issues a schedctl, and returns its own endpoint to PM - as the endpoint of the effective scheduler. When a process terminates, a SCHEDULING_STOP message is sent to the scheduler. The reason for this effective endpoint is for future compatibility. Some day, we may have a scheduler that, instead of scheduling the process itself, forwards the SCHEDULING_START message on to another scheduler. PM has information on who schedules whom. As such, scheduling messages from user-land are sent through PM. An example is when processes change their priority, using nice(). In that case, a getsetpriority message is sent to PM, which then sends a SCHEDULING_SET_NICE to the process's effective scheduler. When a process is forked through PM, it inherits its parent's scheduler, but is spawned with an empty quantum. As before, a request to fork a process flows through VM before returning to PM, which then wakes up the child process. This flow has been modified slightly so that PM notifies the scheduler of the new process, before waking up the child process. If the scheduler fails to take over scheduling, the child process is torn down and the fork fails with an erroneous value. Process priority is entirely decided upon using nice levels. PM stores a copy of each process's nice level and when a child is forked, its parent's nice level is sent in the SCHEDULING_START message. How this level is mapped to a priority queue is up to the scheduler. It should be noted that the nice level is used to determine the max_priority and the parent could have been in a lower priority when it was spawned. To prevent a CPU intensive process from hawking the CPU by continuously forking children that get scheduled in the max_priority, the scheduler should determine in which queue the parent is currently scheduled, and schedule the child in that same queue. Other fixes: The USER_Q in kernel/proc.h was incorrectly defined as NR_SCHED_QUEUES/2. That results in a "off by one" error when converting priority->nice->priority for nice=0. This also had the side effect that if someone were to set the MAX_USER_Q to something else than 0, then USER_Q would be off.
2010-05-18 15:39:04 +02:00
}
/* Inherit current priority and time slice from parent. Since there
* is currently only one scheduler scheduling the whole system, this
* value is local and we assert that the parent endpoint is valid */
if (rmp->endpoint == rmp->parent) {
/* We have a special case here for init, which is the first
process scheduled, and the parent of itself. */
rmp->priority = USER_Q;
rmp->time_slice = DEFAULT_USER_TIME_SLICE;
/*
* Since kernel never changes the cpu of a process, all are
* started on the BSP and the userspace scheduling hasn't
* changed that yet either, we can be sure that BSP is the
* processor where the processes run now.
*/
#ifdef CONFIG_SMP
rmp->cpu = machine.bsp_id;
/* FIXME set the cpu mask */
#endif
}
switch (m_ptr->m_type) {
case SCHEDULING_START:
/* We have a special case here for system processes, for which
* quanum and priority are set explicitly rather than inherited
* from the parent */
rmp->priority = rmp->max_priority;
rmp->time_slice = m_ptr->m_lsys_sched_scheduling_start.quantum;
break;
case SCHEDULING_INHERIT:
/* Inherit current priority and time slice from parent. Since there
* is currently only one scheduler scheduling the whole system, this
* value is local and we assert that the parent endpoint is valid */
if ((rv = sched_isokendpt(m_ptr->m_lsys_sched_scheduling_start.parent,
Scheduling server (by Bjorn Swift) In this second phase, scheduling is moved from PM to its own scheduler (see r6557 for phase one). In the next phase we hope to a) include useful information in the "out of quantum" message and b) create some simple scheduling policy that makes use of that information. When the system starts up, PM will iterate over its process table and ask SCHED to take over scheduling unprivileged processes. This is done by sending a SCHEDULING_START message to SCHED. This message includes the processes endpoint, the parent's endpoint and its nice level. The scheduler adds this process to its schedproc table, issues a schedctl, and returns its own endpoint to PM - as the endpoint of the effective scheduler. When a process terminates, a SCHEDULING_STOP message is sent to the scheduler. The reason for this effective endpoint is for future compatibility. Some day, we may have a scheduler that, instead of scheduling the process itself, forwards the SCHEDULING_START message on to another scheduler. PM has information on who schedules whom. As such, scheduling messages from user-land are sent through PM. An example is when processes change their priority, using nice(). In that case, a getsetpriority message is sent to PM, which then sends a SCHEDULING_SET_NICE to the process's effective scheduler. When a process is forked through PM, it inherits its parent's scheduler, but is spawned with an empty quantum. As before, a request to fork a process flows through VM before returning to PM, which then wakes up the child process. This flow has been modified slightly so that PM notifies the scheduler of the new process, before waking up the child process. If the scheduler fails to take over scheduling, the child process is torn down and the fork fails with an erroneous value. Process priority is entirely decided upon using nice levels. PM stores a copy of each process's nice level and when a child is forked, its parent's nice level is sent in the SCHEDULING_START message. How this level is mapped to a priority queue is up to the scheduler. It should be noted that the nice level is used to determine the max_priority and the parent could have been in a lower priority when it was spawned. To prevent a CPU intensive process from hawking the CPU by continuously forking children that get scheduled in the max_priority, the scheduler should determine in which queue the parent is currently scheduled, and schedule the child in that same queue. Other fixes: The USER_Q in kernel/proc.h was incorrectly defined as NR_SCHED_QUEUES/2. That results in a "off by one" error when converting priority->nice->priority for nice=0. This also had the side effect that if someone were to set the MAX_USER_Q to something else than 0, then USER_Q would be off.
2010-05-18 15:39:04 +02:00
&parent_nr_n)) != OK)
return rv;
rmp->priority = schedproc[parent_nr_n].priority;
rmp->time_slice = schedproc[parent_nr_n].time_slice;
break;
default:
/* not reachable */
assert(0);
Scheduling server (by Bjorn Swift) In this second phase, scheduling is moved from PM to its own scheduler (see r6557 for phase one). In the next phase we hope to a) include useful information in the "out of quantum" message and b) create some simple scheduling policy that makes use of that information. When the system starts up, PM will iterate over its process table and ask SCHED to take over scheduling unprivileged processes. This is done by sending a SCHEDULING_START message to SCHED. This message includes the processes endpoint, the parent's endpoint and its nice level. The scheduler adds this process to its schedproc table, issues a schedctl, and returns its own endpoint to PM - as the endpoint of the effective scheduler. When a process terminates, a SCHEDULING_STOP message is sent to the scheduler. The reason for this effective endpoint is for future compatibility. Some day, we may have a scheduler that, instead of scheduling the process itself, forwards the SCHEDULING_START message on to another scheduler. PM has information on who schedules whom. As such, scheduling messages from user-land are sent through PM. An example is when processes change their priority, using nice(). In that case, a getsetpriority message is sent to PM, which then sends a SCHEDULING_SET_NICE to the process's effective scheduler. When a process is forked through PM, it inherits its parent's scheduler, but is spawned with an empty quantum. As before, a request to fork a process flows through VM before returning to PM, which then wakes up the child process. This flow has been modified slightly so that PM notifies the scheduler of the new process, before waking up the child process. If the scheduler fails to take over scheduling, the child process is torn down and the fork fails with an erroneous value. Process priority is entirely decided upon using nice levels. PM stores a copy of each process's nice level and when a child is forked, its parent's nice level is sent in the SCHEDULING_START message. How this level is mapped to a priority queue is up to the scheduler. It should be noted that the nice level is used to determine the max_priority and the parent could have been in a lower priority when it was spawned. To prevent a CPU intensive process from hawking the CPU by continuously forking children that get scheduled in the max_priority, the scheduler should determine in which queue the parent is currently scheduled, and schedule the child in that same queue. Other fixes: The USER_Q in kernel/proc.h was incorrectly defined as NR_SCHED_QUEUES/2. That results in a "off by one" error when converting priority->nice->priority for nice=0. This also had the side effect that if someone were to set the MAX_USER_Q to something else than 0, then USER_Q would be off.
2010-05-18 15:39:04 +02:00
}
/* Take over scheduling the process. The kernel reply message populates
* the processes current priority and its time slice */
if ((rv = sys_schedctl(0, rmp->endpoint, 0, 0, 0)) != OK) {
printf("Sched: Error taking over scheduling for %d, kernel said %d\n",
Scheduling server (by Bjorn Swift) In this second phase, scheduling is moved from PM to its own scheduler (see r6557 for phase one). In the next phase we hope to a) include useful information in the "out of quantum" message and b) create some simple scheduling policy that makes use of that information. When the system starts up, PM will iterate over its process table and ask SCHED to take over scheduling unprivileged processes. This is done by sending a SCHEDULING_START message to SCHED. This message includes the processes endpoint, the parent's endpoint and its nice level. The scheduler adds this process to its schedproc table, issues a schedctl, and returns its own endpoint to PM - as the endpoint of the effective scheduler. When a process terminates, a SCHEDULING_STOP message is sent to the scheduler. The reason for this effective endpoint is for future compatibility. Some day, we may have a scheduler that, instead of scheduling the process itself, forwards the SCHEDULING_START message on to another scheduler. PM has information on who schedules whom. As such, scheduling messages from user-land are sent through PM. An example is when processes change their priority, using nice(). In that case, a getsetpriority message is sent to PM, which then sends a SCHEDULING_SET_NICE to the process's effective scheduler. When a process is forked through PM, it inherits its parent's scheduler, but is spawned with an empty quantum. As before, a request to fork a process flows through VM before returning to PM, which then wakes up the child process. This flow has been modified slightly so that PM notifies the scheduler of the new process, before waking up the child process. If the scheduler fails to take over scheduling, the child process is torn down and the fork fails with an erroneous value. Process priority is entirely decided upon using nice levels. PM stores a copy of each process's nice level and when a child is forked, its parent's nice level is sent in the SCHEDULING_START message. How this level is mapped to a priority queue is up to the scheduler. It should be noted that the nice level is used to determine the max_priority and the parent could have been in a lower priority when it was spawned. To prevent a CPU intensive process from hawking the CPU by continuously forking children that get scheduled in the max_priority, the scheduler should determine in which queue the parent is currently scheduled, and schedule the child in that same queue. Other fixes: The USER_Q in kernel/proc.h was incorrectly defined as NR_SCHED_QUEUES/2. That results in a "off by one" error when converting priority->nice->priority for nice=0. This also had the side effect that if someone were to set the MAX_USER_Q to something else than 0, then USER_Q would be off.
2010-05-18 15:39:04 +02:00
rmp->endpoint, rv);
return rv;
}
rmp->flags = IN_USE;
/* Schedule the process, giving it some quantum */
pick_cpu(rmp);
while ((rv = schedule_process(rmp, SCHEDULE_CHANGE_ALL)) == EBADCPU) {
/* don't try this CPU ever again */
cpu_proc[rmp->cpu] = CPU_DEAD;
pick_cpu(rmp);
}
if (rv != OK) {
Scheduling server (by Bjorn Swift) In this second phase, scheduling is moved from PM to its own scheduler (see r6557 for phase one). In the next phase we hope to a) include useful information in the "out of quantum" message and b) create some simple scheduling policy that makes use of that information. When the system starts up, PM will iterate over its process table and ask SCHED to take over scheduling unprivileged processes. This is done by sending a SCHEDULING_START message to SCHED. This message includes the processes endpoint, the parent's endpoint and its nice level. The scheduler adds this process to its schedproc table, issues a schedctl, and returns its own endpoint to PM - as the endpoint of the effective scheduler. When a process terminates, a SCHEDULING_STOP message is sent to the scheduler. The reason for this effective endpoint is for future compatibility. Some day, we may have a scheduler that, instead of scheduling the process itself, forwards the SCHEDULING_START message on to another scheduler. PM has information on who schedules whom. As such, scheduling messages from user-land are sent through PM. An example is when processes change their priority, using nice(). In that case, a getsetpriority message is sent to PM, which then sends a SCHEDULING_SET_NICE to the process's effective scheduler. When a process is forked through PM, it inherits its parent's scheduler, but is spawned with an empty quantum. As before, a request to fork a process flows through VM before returning to PM, which then wakes up the child process. This flow has been modified slightly so that PM notifies the scheduler of the new process, before waking up the child process. If the scheduler fails to take over scheduling, the child process is torn down and the fork fails with an erroneous value. Process priority is entirely decided upon using nice levels. PM stores a copy of each process's nice level and when a child is forked, its parent's nice level is sent in the SCHEDULING_START message. How this level is mapped to a priority queue is up to the scheduler. It should be noted that the nice level is used to determine the max_priority and the parent could have been in a lower priority when it was spawned. To prevent a CPU intensive process from hawking the CPU by continuously forking children that get scheduled in the max_priority, the scheduler should determine in which queue the parent is currently scheduled, and schedule the child in that same queue. Other fixes: The USER_Q in kernel/proc.h was incorrectly defined as NR_SCHED_QUEUES/2. That results in a "off by one" error when converting priority->nice->priority for nice=0. This also had the side effect that if someone were to set the MAX_USER_Q to something else than 0, then USER_Q would be off.
2010-05-18 15:39:04 +02:00
printf("Sched: Error while scheduling process, kernel replied %d\n",
rv);
return rv;
}
/* Mark ourselves as the new scheduler.
* By default, processes are scheduled by the parents scheduler. In case
* this scheduler would want to delegate scheduling to another
* scheduler, it could do so and then write the endpoint of that
* scheduler into the "scheduler" field.
Scheduling server (by Bjorn Swift) In this second phase, scheduling is moved from PM to its own scheduler (see r6557 for phase one). In the next phase we hope to a) include useful information in the "out of quantum" message and b) create some simple scheduling policy that makes use of that information. When the system starts up, PM will iterate over its process table and ask SCHED to take over scheduling unprivileged processes. This is done by sending a SCHEDULING_START message to SCHED. This message includes the processes endpoint, the parent's endpoint and its nice level. The scheduler adds this process to its schedproc table, issues a schedctl, and returns its own endpoint to PM - as the endpoint of the effective scheduler. When a process terminates, a SCHEDULING_STOP message is sent to the scheduler. The reason for this effective endpoint is for future compatibility. Some day, we may have a scheduler that, instead of scheduling the process itself, forwards the SCHEDULING_START message on to another scheduler. PM has information on who schedules whom. As such, scheduling messages from user-land are sent through PM. An example is when processes change their priority, using nice(). In that case, a getsetpriority message is sent to PM, which then sends a SCHEDULING_SET_NICE to the process's effective scheduler. When a process is forked through PM, it inherits its parent's scheduler, but is spawned with an empty quantum. As before, a request to fork a process flows through VM before returning to PM, which then wakes up the child process. This flow has been modified slightly so that PM notifies the scheduler of the new process, before waking up the child process. If the scheduler fails to take over scheduling, the child process is torn down and the fork fails with an erroneous value. Process priority is entirely decided upon using nice levels. PM stores a copy of each process's nice level and when a child is forked, its parent's nice level is sent in the SCHEDULING_START message. How this level is mapped to a priority queue is up to the scheduler. It should be noted that the nice level is used to determine the max_priority and the parent could have been in a lower priority when it was spawned. To prevent a CPU intensive process from hawking the CPU by continuously forking children that get scheduled in the max_priority, the scheduler should determine in which queue the parent is currently scheduled, and schedule the child in that same queue. Other fixes: The USER_Q in kernel/proc.h was incorrectly defined as NR_SCHED_QUEUES/2. That results in a "off by one" error when converting priority->nice->priority for nice=0. This also had the side effect that if someone were to set the MAX_USER_Q to something else than 0, then USER_Q would be off.
2010-05-18 15:39:04 +02:00
*/
m_ptr->m_sched_lsys_scheduling_start.scheduler = SCHED_PROC_NR;
Scheduling server (by Bjorn Swift) In this second phase, scheduling is moved from PM to its own scheduler (see r6557 for phase one). In the next phase we hope to a) include useful information in the "out of quantum" message and b) create some simple scheduling policy that makes use of that information. When the system starts up, PM will iterate over its process table and ask SCHED to take over scheduling unprivileged processes. This is done by sending a SCHEDULING_START message to SCHED. This message includes the processes endpoint, the parent's endpoint and its nice level. The scheduler adds this process to its schedproc table, issues a schedctl, and returns its own endpoint to PM - as the endpoint of the effective scheduler. When a process terminates, a SCHEDULING_STOP message is sent to the scheduler. The reason for this effective endpoint is for future compatibility. Some day, we may have a scheduler that, instead of scheduling the process itself, forwards the SCHEDULING_START message on to another scheduler. PM has information on who schedules whom. As such, scheduling messages from user-land are sent through PM. An example is when processes change their priority, using nice(). In that case, a getsetpriority message is sent to PM, which then sends a SCHEDULING_SET_NICE to the process's effective scheduler. When a process is forked through PM, it inherits its parent's scheduler, but is spawned with an empty quantum. As before, a request to fork a process flows through VM before returning to PM, which then wakes up the child process. This flow has been modified slightly so that PM notifies the scheduler of the new process, before waking up the child process. If the scheduler fails to take over scheduling, the child process is torn down and the fork fails with an erroneous value. Process priority is entirely decided upon using nice levels. PM stores a copy of each process's nice level and when a child is forked, its parent's nice level is sent in the SCHEDULING_START message. How this level is mapped to a priority queue is up to the scheduler. It should be noted that the nice level is used to determine the max_priority and the parent could have been in a lower priority when it was spawned. To prevent a CPU intensive process from hawking the CPU by continuously forking children that get scheduled in the max_priority, the scheduler should determine in which queue the parent is currently scheduled, and schedule the child in that same queue. Other fixes: The USER_Q in kernel/proc.h was incorrectly defined as NR_SCHED_QUEUES/2. That results in a "off by one" error when converting priority->nice->priority for nice=0. This also had the side effect that if someone were to set the MAX_USER_Q to something else than 0, then USER_Q would be off.
2010-05-18 15:39:04 +02:00
return OK;
}
/*===========================================================================*
* do_nice *
*===========================================================================*/
2012-03-25 20:25:53 +02:00
int do_nice(message *m_ptr)
Scheduling server (by Bjorn Swift) In this second phase, scheduling is moved from PM to its own scheduler (see r6557 for phase one). In the next phase we hope to a) include useful information in the "out of quantum" message and b) create some simple scheduling policy that makes use of that information. When the system starts up, PM will iterate over its process table and ask SCHED to take over scheduling unprivileged processes. This is done by sending a SCHEDULING_START message to SCHED. This message includes the processes endpoint, the parent's endpoint and its nice level. The scheduler adds this process to its schedproc table, issues a schedctl, and returns its own endpoint to PM - as the endpoint of the effective scheduler. When a process terminates, a SCHEDULING_STOP message is sent to the scheduler. The reason for this effective endpoint is for future compatibility. Some day, we may have a scheduler that, instead of scheduling the process itself, forwards the SCHEDULING_START message on to another scheduler. PM has information on who schedules whom. As such, scheduling messages from user-land are sent through PM. An example is when processes change their priority, using nice(). In that case, a getsetpriority message is sent to PM, which then sends a SCHEDULING_SET_NICE to the process's effective scheduler. When a process is forked through PM, it inherits its parent's scheduler, but is spawned with an empty quantum. As before, a request to fork a process flows through VM before returning to PM, which then wakes up the child process. This flow has been modified slightly so that PM notifies the scheduler of the new process, before waking up the child process. If the scheduler fails to take over scheduling, the child process is torn down and the fork fails with an erroneous value. Process priority is entirely decided upon using nice levels. PM stores a copy of each process's nice level and when a child is forked, its parent's nice level is sent in the SCHEDULING_START message. How this level is mapped to a priority queue is up to the scheduler. It should be noted that the nice level is used to determine the max_priority and the parent could have been in a lower priority when it was spawned. To prevent a CPU intensive process from hawking the CPU by continuously forking children that get scheduled in the max_priority, the scheduler should determine in which queue the parent is currently scheduled, and schedule the child in that same queue. Other fixes: The USER_Q in kernel/proc.h was incorrectly defined as NR_SCHED_QUEUES/2. That results in a "off by one" error when converting priority->nice->priority for nice=0. This also had the side effect that if someone were to set the MAX_USER_Q to something else than 0, then USER_Q would be off.
2010-05-18 15:39:04 +02:00
{
struct schedproc *rmp;
int rv;
int proc_nr_n;
unsigned new_q, old_q, old_max_q;
/* check who can send you requests */
if (!accept_message(m_ptr))
Scheduling server (by Bjorn Swift) In this second phase, scheduling is moved from PM to its own scheduler (see r6557 for phase one). In the next phase we hope to a) include useful information in the "out of quantum" message and b) create some simple scheduling policy that makes use of that information. When the system starts up, PM will iterate over its process table and ask SCHED to take over scheduling unprivileged processes. This is done by sending a SCHEDULING_START message to SCHED. This message includes the processes endpoint, the parent's endpoint and its nice level. The scheduler adds this process to its schedproc table, issues a schedctl, and returns its own endpoint to PM - as the endpoint of the effective scheduler. When a process terminates, a SCHEDULING_STOP message is sent to the scheduler. The reason for this effective endpoint is for future compatibility. Some day, we may have a scheduler that, instead of scheduling the process itself, forwards the SCHEDULING_START message on to another scheduler. PM has information on who schedules whom. As such, scheduling messages from user-land are sent through PM. An example is when processes change their priority, using nice(). In that case, a getsetpriority message is sent to PM, which then sends a SCHEDULING_SET_NICE to the process's effective scheduler. When a process is forked through PM, it inherits its parent's scheduler, but is spawned with an empty quantum. As before, a request to fork a process flows through VM before returning to PM, which then wakes up the child process. This flow has been modified slightly so that PM notifies the scheduler of the new process, before waking up the child process. If the scheduler fails to take over scheduling, the child process is torn down and the fork fails with an erroneous value. Process priority is entirely decided upon using nice levels. PM stores a copy of each process's nice level and when a child is forked, its parent's nice level is sent in the SCHEDULING_START message. How this level is mapped to a priority queue is up to the scheduler. It should be noted that the nice level is used to determine the max_priority and the parent could have been in a lower priority when it was spawned. To prevent a CPU intensive process from hawking the CPU by continuously forking children that get scheduled in the max_priority, the scheduler should determine in which queue the parent is currently scheduled, and schedule the child in that same queue. Other fixes: The USER_Q in kernel/proc.h was incorrectly defined as NR_SCHED_QUEUES/2. That results in a "off by one" error when converting priority->nice->priority for nice=0. This also had the side effect that if someone were to set the MAX_USER_Q to something else than 0, then USER_Q would be off.
2010-05-18 15:39:04 +02:00
return EPERM;
if (sched_isokendpt(m_ptr->m_pm_sched_scheduling_set_nice.endpoint, &proc_nr_n) != OK) {
printf("SCHED: WARNING: got an invalid endpoint in OoQ msg "
"%d\n", m_ptr->m_pm_sched_scheduling_set_nice.endpoint);
2010-06-24 09:37:26 +02:00
return EBADEPT;
Scheduling server (by Bjorn Swift) In this second phase, scheduling is moved from PM to its own scheduler (see r6557 for phase one). In the next phase we hope to a) include useful information in the "out of quantum" message and b) create some simple scheduling policy that makes use of that information. When the system starts up, PM will iterate over its process table and ask SCHED to take over scheduling unprivileged processes. This is done by sending a SCHEDULING_START message to SCHED. This message includes the processes endpoint, the parent's endpoint and its nice level. The scheduler adds this process to its schedproc table, issues a schedctl, and returns its own endpoint to PM - as the endpoint of the effective scheduler. When a process terminates, a SCHEDULING_STOP message is sent to the scheduler. The reason for this effective endpoint is for future compatibility. Some day, we may have a scheduler that, instead of scheduling the process itself, forwards the SCHEDULING_START message on to another scheduler. PM has information on who schedules whom. As such, scheduling messages from user-land are sent through PM. An example is when processes change their priority, using nice(). In that case, a getsetpriority message is sent to PM, which then sends a SCHEDULING_SET_NICE to the process's effective scheduler. When a process is forked through PM, it inherits its parent's scheduler, but is spawned with an empty quantum. As before, a request to fork a process flows through VM before returning to PM, which then wakes up the child process. This flow has been modified slightly so that PM notifies the scheduler of the new process, before waking up the child process. If the scheduler fails to take over scheduling, the child process is torn down and the fork fails with an erroneous value. Process priority is entirely decided upon using nice levels. PM stores a copy of each process's nice level and when a child is forked, its parent's nice level is sent in the SCHEDULING_START message. How this level is mapped to a priority queue is up to the scheduler. It should be noted that the nice level is used to determine the max_priority and the parent could have been in a lower priority when it was spawned. To prevent a CPU intensive process from hawking the CPU by continuously forking children that get scheduled in the max_priority, the scheduler should determine in which queue the parent is currently scheduled, and schedule the child in that same queue. Other fixes: The USER_Q in kernel/proc.h was incorrectly defined as NR_SCHED_QUEUES/2. That results in a "off by one" error when converting priority->nice->priority for nice=0. This also had the side effect that if someone were to set the MAX_USER_Q to something else than 0, then USER_Q would be off.
2010-05-18 15:39:04 +02:00
}
rmp = &schedproc[proc_nr_n];
new_q = m_ptr->m_pm_sched_scheduling_set_nice.maxprio;
if (new_q >= NR_SCHED_QUEUES) {
return EINVAL;
}
Scheduling server (by Bjorn Swift) In this second phase, scheduling is moved from PM to its own scheduler (see r6557 for phase one). In the next phase we hope to a) include useful information in the "out of quantum" message and b) create some simple scheduling policy that makes use of that information. When the system starts up, PM will iterate over its process table and ask SCHED to take over scheduling unprivileged processes. This is done by sending a SCHEDULING_START message to SCHED. This message includes the processes endpoint, the parent's endpoint and its nice level. The scheduler adds this process to its schedproc table, issues a schedctl, and returns its own endpoint to PM - as the endpoint of the effective scheduler. When a process terminates, a SCHEDULING_STOP message is sent to the scheduler. The reason for this effective endpoint is for future compatibility. Some day, we may have a scheduler that, instead of scheduling the process itself, forwards the SCHEDULING_START message on to another scheduler. PM has information on who schedules whom. As such, scheduling messages from user-land are sent through PM. An example is when processes change their priority, using nice(). In that case, a getsetpriority message is sent to PM, which then sends a SCHEDULING_SET_NICE to the process's effective scheduler. When a process is forked through PM, it inherits its parent's scheduler, but is spawned with an empty quantum. As before, a request to fork a process flows through VM before returning to PM, which then wakes up the child process. This flow has been modified slightly so that PM notifies the scheduler of the new process, before waking up the child process. If the scheduler fails to take over scheduling, the child process is torn down and the fork fails with an erroneous value. Process priority is entirely decided upon using nice levels. PM stores a copy of each process's nice level and when a child is forked, its parent's nice level is sent in the SCHEDULING_START message. How this level is mapped to a priority queue is up to the scheduler. It should be noted that the nice level is used to determine the max_priority and the parent could have been in a lower priority when it was spawned. To prevent a CPU intensive process from hawking the CPU by continuously forking children that get scheduled in the max_priority, the scheduler should determine in which queue the parent is currently scheduled, and schedule the child in that same queue. Other fixes: The USER_Q in kernel/proc.h was incorrectly defined as NR_SCHED_QUEUES/2. That results in a "off by one" error when converting priority->nice->priority for nice=0. This also had the side effect that if someone were to set the MAX_USER_Q to something else than 0, then USER_Q would be off.
2010-05-18 15:39:04 +02:00
/* Store old values, in case we need to roll back the changes */
old_q = rmp->priority;
old_max_q = rmp->max_priority;
/* Update the proc entry and reschedule the process */
rmp->max_priority = rmp->priority = new_q;
if ((rv = schedule_process_local(rmp)) != OK) {
Scheduling server (by Bjorn Swift) In this second phase, scheduling is moved from PM to its own scheduler (see r6557 for phase one). In the next phase we hope to a) include useful information in the "out of quantum" message and b) create some simple scheduling policy that makes use of that information. When the system starts up, PM will iterate over its process table and ask SCHED to take over scheduling unprivileged processes. This is done by sending a SCHEDULING_START message to SCHED. This message includes the processes endpoint, the parent's endpoint and its nice level. The scheduler adds this process to its schedproc table, issues a schedctl, and returns its own endpoint to PM - as the endpoint of the effective scheduler. When a process terminates, a SCHEDULING_STOP message is sent to the scheduler. The reason for this effective endpoint is for future compatibility. Some day, we may have a scheduler that, instead of scheduling the process itself, forwards the SCHEDULING_START message on to another scheduler. PM has information on who schedules whom. As such, scheduling messages from user-land are sent through PM. An example is when processes change their priority, using nice(). In that case, a getsetpriority message is sent to PM, which then sends a SCHEDULING_SET_NICE to the process's effective scheduler. When a process is forked through PM, it inherits its parent's scheduler, but is spawned with an empty quantum. As before, a request to fork a process flows through VM before returning to PM, which then wakes up the child process. This flow has been modified slightly so that PM notifies the scheduler of the new process, before waking up the child process. If the scheduler fails to take over scheduling, the child process is torn down and the fork fails with an erroneous value. Process priority is entirely decided upon using nice levels. PM stores a copy of each process's nice level and when a child is forked, its parent's nice level is sent in the SCHEDULING_START message. How this level is mapped to a priority queue is up to the scheduler. It should be noted that the nice level is used to determine the max_priority and the parent could have been in a lower priority when it was spawned. To prevent a CPU intensive process from hawking the CPU by continuously forking children that get scheduled in the max_priority, the scheduler should determine in which queue the parent is currently scheduled, and schedule the child in that same queue. Other fixes: The USER_Q in kernel/proc.h was incorrectly defined as NR_SCHED_QUEUES/2. That results in a "off by one" error when converting priority->nice->priority for nice=0. This also had the side effect that if someone were to set the MAX_USER_Q to something else than 0, then USER_Q would be off.
2010-05-18 15:39:04 +02:00
/* Something went wrong when rescheduling the process, roll
* back the changes to proc struct */
rmp->priority = old_q;
rmp->max_priority = old_max_q;
}
return rv;
}
/*===========================================================================*
* schedule_process *
*===========================================================================*/
2012-03-25 20:25:53 +02:00
static int schedule_process(struct schedproc * rmp, unsigned flags)
Scheduling server (by Bjorn Swift) In this second phase, scheduling is moved from PM to its own scheduler (see r6557 for phase one). In the next phase we hope to a) include useful information in the "out of quantum" message and b) create some simple scheduling policy that makes use of that information. When the system starts up, PM will iterate over its process table and ask SCHED to take over scheduling unprivileged processes. This is done by sending a SCHEDULING_START message to SCHED. This message includes the processes endpoint, the parent's endpoint and its nice level. The scheduler adds this process to its schedproc table, issues a schedctl, and returns its own endpoint to PM - as the endpoint of the effective scheduler. When a process terminates, a SCHEDULING_STOP message is sent to the scheduler. The reason for this effective endpoint is for future compatibility. Some day, we may have a scheduler that, instead of scheduling the process itself, forwards the SCHEDULING_START message on to another scheduler. PM has information on who schedules whom. As such, scheduling messages from user-land are sent through PM. An example is when processes change their priority, using nice(). In that case, a getsetpriority message is sent to PM, which then sends a SCHEDULING_SET_NICE to the process's effective scheduler. When a process is forked through PM, it inherits its parent's scheduler, but is spawned with an empty quantum. As before, a request to fork a process flows through VM before returning to PM, which then wakes up the child process. This flow has been modified slightly so that PM notifies the scheduler of the new process, before waking up the child process. If the scheduler fails to take over scheduling, the child process is torn down and the fork fails with an erroneous value. Process priority is entirely decided upon using nice levels. PM stores a copy of each process's nice level and when a child is forked, its parent's nice level is sent in the SCHEDULING_START message. How this level is mapped to a priority queue is up to the scheduler. It should be noted that the nice level is used to determine the max_priority and the parent could have been in a lower priority when it was spawned. To prevent a CPU intensive process from hawking the CPU by continuously forking children that get scheduled in the max_priority, the scheduler should determine in which queue the parent is currently scheduled, and schedule the child in that same queue. Other fixes: The USER_Q in kernel/proc.h was incorrectly defined as NR_SCHED_QUEUES/2. That results in a "off by one" error when converting priority->nice->priority for nice=0. This also had the side effect that if someone were to set the MAX_USER_Q to something else than 0, then USER_Q would be off.
2010-05-18 15:39:04 +02:00
{
int err;
int new_prio, new_quantum, new_cpu;
Scheduling server (by Bjorn Swift) In this second phase, scheduling is moved from PM to its own scheduler (see r6557 for phase one). In the next phase we hope to a) include useful information in the "out of quantum" message and b) create some simple scheduling policy that makes use of that information. When the system starts up, PM will iterate over its process table and ask SCHED to take over scheduling unprivileged processes. This is done by sending a SCHEDULING_START message to SCHED. This message includes the processes endpoint, the parent's endpoint and its nice level. The scheduler adds this process to its schedproc table, issues a schedctl, and returns its own endpoint to PM - as the endpoint of the effective scheduler. When a process terminates, a SCHEDULING_STOP message is sent to the scheduler. The reason for this effective endpoint is for future compatibility. Some day, we may have a scheduler that, instead of scheduling the process itself, forwards the SCHEDULING_START message on to another scheduler. PM has information on who schedules whom. As such, scheduling messages from user-land are sent through PM. An example is when processes change their priority, using nice(). In that case, a getsetpriority message is sent to PM, which then sends a SCHEDULING_SET_NICE to the process's effective scheduler. When a process is forked through PM, it inherits its parent's scheduler, but is spawned with an empty quantum. As before, a request to fork a process flows through VM before returning to PM, which then wakes up the child process. This flow has been modified slightly so that PM notifies the scheduler of the new process, before waking up the child process. If the scheduler fails to take over scheduling, the child process is torn down and the fork fails with an erroneous value. Process priority is entirely decided upon using nice levels. PM stores a copy of each process's nice level and when a child is forked, its parent's nice level is sent in the SCHEDULING_START message. How this level is mapped to a priority queue is up to the scheduler. It should be noted that the nice level is used to determine the max_priority and the parent could have been in a lower priority when it was spawned. To prevent a CPU intensive process from hawking the CPU by continuously forking children that get scheduled in the max_priority, the scheduler should determine in which queue the parent is currently scheduled, and schedule the child in that same queue. Other fixes: The USER_Q in kernel/proc.h was incorrectly defined as NR_SCHED_QUEUES/2. That results in a "off by one" error when converting priority->nice->priority for nice=0. This also had the side effect that if someone were to set the MAX_USER_Q to something else than 0, then USER_Q would be off.
2010-05-18 15:39:04 +02:00
pick_cpu(rmp);
if (flags & SCHEDULE_CHANGE_PRIO)
new_prio = rmp->priority;
else
new_prio = -1;
if (flags & SCHEDULE_CHANGE_QUANTUM)
new_quantum = rmp->time_slice;
else
new_quantum = -1;
if (flags & SCHEDULE_CHANGE_CPU)
new_cpu = rmp->cpu;
else
new_cpu = -1;
if ((err = sys_schedule(rmp->endpoint, new_prio,
new_quantum, new_cpu)) != OK) {
printf("PM: An error occurred when trying to schedule %d: %d\n",
rmp->endpoint, err);
Scheduling server (by Bjorn Swift) In this second phase, scheduling is moved from PM to its own scheduler (see r6557 for phase one). In the next phase we hope to a) include useful information in the "out of quantum" message and b) create some simple scheduling policy that makes use of that information. When the system starts up, PM will iterate over its process table and ask SCHED to take over scheduling unprivileged processes. This is done by sending a SCHEDULING_START message to SCHED. This message includes the processes endpoint, the parent's endpoint and its nice level. The scheduler adds this process to its schedproc table, issues a schedctl, and returns its own endpoint to PM - as the endpoint of the effective scheduler. When a process terminates, a SCHEDULING_STOP message is sent to the scheduler. The reason for this effective endpoint is for future compatibility. Some day, we may have a scheduler that, instead of scheduling the process itself, forwards the SCHEDULING_START message on to another scheduler. PM has information on who schedules whom. As such, scheduling messages from user-land are sent through PM. An example is when processes change their priority, using nice(). In that case, a getsetpriority message is sent to PM, which then sends a SCHEDULING_SET_NICE to the process's effective scheduler. When a process is forked through PM, it inherits its parent's scheduler, but is spawned with an empty quantum. As before, a request to fork a process flows through VM before returning to PM, which then wakes up the child process. This flow has been modified slightly so that PM notifies the scheduler of the new process, before waking up the child process. If the scheduler fails to take over scheduling, the child process is torn down and the fork fails with an erroneous value. Process priority is entirely decided upon using nice levels. PM stores a copy of each process's nice level and when a child is forked, its parent's nice level is sent in the SCHEDULING_START message. How this level is mapped to a priority queue is up to the scheduler. It should be noted that the nice level is used to determine the max_priority and the parent could have been in a lower priority when it was spawned. To prevent a CPU intensive process from hawking the CPU by continuously forking children that get scheduled in the max_priority, the scheduler should determine in which queue the parent is currently scheduled, and schedule the child in that same queue. Other fixes: The USER_Q in kernel/proc.h was incorrectly defined as NR_SCHED_QUEUES/2. That results in a "off by one" error when converting priority->nice->priority for nice=0. This also had the side effect that if someone were to set the MAX_USER_Q to something else than 0, then USER_Q would be off.
2010-05-18 15:39:04 +02:00
}
return err;
Scheduling server (by Bjorn Swift) In this second phase, scheduling is moved from PM to its own scheduler (see r6557 for phase one). In the next phase we hope to a) include useful information in the "out of quantum" message and b) create some simple scheduling policy that makes use of that information. When the system starts up, PM will iterate over its process table and ask SCHED to take over scheduling unprivileged processes. This is done by sending a SCHEDULING_START message to SCHED. This message includes the processes endpoint, the parent's endpoint and its nice level. The scheduler adds this process to its schedproc table, issues a schedctl, and returns its own endpoint to PM - as the endpoint of the effective scheduler. When a process terminates, a SCHEDULING_STOP message is sent to the scheduler. The reason for this effective endpoint is for future compatibility. Some day, we may have a scheduler that, instead of scheduling the process itself, forwards the SCHEDULING_START message on to another scheduler. PM has information on who schedules whom. As such, scheduling messages from user-land are sent through PM. An example is when processes change their priority, using nice(). In that case, a getsetpriority message is sent to PM, which then sends a SCHEDULING_SET_NICE to the process's effective scheduler. When a process is forked through PM, it inherits its parent's scheduler, but is spawned with an empty quantum. As before, a request to fork a process flows through VM before returning to PM, which then wakes up the child process. This flow has been modified slightly so that PM notifies the scheduler of the new process, before waking up the child process. If the scheduler fails to take over scheduling, the child process is torn down and the fork fails with an erroneous value. Process priority is entirely decided upon using nice levels. PM stores a copy of each process's nice level and when a child is forked, its parent's nice level is sent in the SCHEDULING_START message. How this level is mapped to a priority queue is up to the scheduler. It should be noted that the nice level is used to determine the max_priority and the parent could have been in a lower priority when it was spawned. To prevent a CPU intensive process from hawking the CPU by continuously forking children that get scheduled in the max_priority, the scheduler should determine in which queue the parent is currently scheduled, and schedule the child in that same queue. Other fixes: The USER_Q in kernel/proc.h was incorrectly defined as NR_SCHED_QUEUES/2. That results in a "off by one" error when converting priority->nice->priority for nice=0. This also had the side effect that if someone were to set the MAX_USER_Q to something else than 0, then USER_Q would be off.
2010-05-18 15:39:04 +02:00
}
/*===========================================================================*
* start_scheduling *
*===========================================================================*/
2012-03-25 20:25:53 +02:00
void init_scheduling(void)
Scheduling server (by Bjorn Swift) In this second phase, scheduling is moved from PM to its own scheduler (see r6557 for phase one). In the next phase we hope to a) include useful information in the "out of quantum" message and b) create some simple scheduling policy that makes use of that information. When the system starts up, PM will iterate over its process table and ask SCHED to take over scheduling unprivileged processes. This is done by sending a SCHEDULING_START message to SCHED. This message includes the processes endpoint, the parent's endpoint and its nice level. The scheduler adds this process to its schedproc table, issues a schedctl, and returns its own endpoint to PM - as the endpoint of the effective scheduler. When a process terminates, a SCHEDULING_STOP message is sent to the scheduler. The reason for this effective endpoint is for future compatibility. Some day, we may have a scheduler that, instead of scheduling the process itself, forwards the SCHEDULING_START message on to another scheduler. PM has information on who schedules whom. As such, scheduling messages from user-land are sent through PM. An example is when processes change their priority, using nice(). In that case, a getsetpriority message is sent to PM, which then sends a SCHEDULING_SET_NICE to the process's effective scheduler. When a process is forked through PM, it inherits its parent's scheduler, but is spawned with an empty quantum. As before, a request to fork a process flows through VM before returning to PM, which then wakes up the child process. This flow has been modified slightly so that PM notifies the scheduler of the new process, before waking up the child process. If the scheduler fails to take over scheduling, the child process is torn down and the fork fails with an erroneous value. Process priority is entirely decided upon using nice levels. PM stores a copy of each process's nice level and when a child is forked, its parent's nice level is sent in the SCHEDULING_START message. How this level is mapped to a priority queue is up to the scheduler. It should be noted that the nice level is used to determine the max_priority and the parent could have been in a lower priority when it was spawned. To prevent a CPU intensive process from hawking the CPU by continuously forking children that get scheduled in the max_priority, the scheduler should determine in which queue the parent is currently scheduled, and schedule the child in that same queue. Other fixes: The USER_Q in kernel/proc.h was incorrectly defined as NR_SCHED_QUEUES/2. That results in a "off by one" error when converting priority->nice->priority for nice=0. This also had the side effect that if someone were to set the MAX_USER_Q to something else than 0, then USER_Q would be off.
2010-05-18 15:39:04 +02:00
{
balance_timeout = BALANCE_TIMEOUT * sys_hz();
2010-07-09 14:58:18 +02:00
init_timer(&sched_timer);
set_timer(&sched_timer, balance_timeout, balance_queues, 0);
Scheduling server (by Bjorn Swift) In this second phase, scheduling is moved from PM to its own scheduler (see r6557 for phase one). In the next phase we hope to a) include useful information in the "out of quantum" message and b) create some simple scheduling policy that makes use of that information. When the system starts up, PM will iterate over its process table and ask SCHED to take over scheduling unprivileged processes. This is done by sending a SCHEDULING_START message to SCHED. This message includes the processes endpoint, the parent's endpoint and its nice level. The scheduler adds this process to its schedproc table, issues a schedctl, and returns its own endpoint to PM - as the endpoint of the effective scheduler. When a process terminates, a SCHEDULING_STOP message is sent to the scheduler. The reason for this effective endpoint is for future compatibility. Some day, we may have a scheduler that, instead of scheduling the process itself, forwards the SCHEDULING_START message on to another scheduler. PM has information on who schedules whom. As such, scheduling messages from user-land are sent through PM. An example is when processes change their priority, using nice(). In that case, a getsetpriority message is sent to PM, which then sends a SCHEDULING_SET_NICE to the process's effective scheduler. When a process is forked through PM, it inherits its parent's scheduler, but is spawned with an empty quantum. As before, a request to fork a process flows through VM before returning to PM, which then wakes up the child process. This flow has been modified slightly so that PM notifies the scheduler of the new process, before waking up the child process. If the scheduler fails to take over scheduling, the child process is torn down and the fork fails with an erroneous value. Process priority is entirely decided upon using nice levels. PM stores a copy of each process's nice level and when a child is forked, its parent's nice level is sent in the SCHEDULING_START message. How this level is mapped to a priority queue is up to the scheduler. It should be noted that the nice level is used to determine the max_priority and the parent could have been in a lower priority when it was spawned. To prevent a CPU intensive process from hawking the CPU by continuously forking children that get scheduled in the max_priority, the scheduler should determine in which queue the parent is currently scheduled, and schedule the child in that same queue. Other fixes: The USER_Q in kernel/proc.h was incorrectly defined as NR_SCHED_QUEUES/2. That results in a "off by one" error when converting priority->nice->priority for nice=0. This also had the side effect that if someone were to set the MAX_USER_Q to something else than 0, then USER_Q would be off.
2010-05-18 15:39:04 +02:00
}
/*===========================================================================*
* balance_queues *
*===========================================================================*/
/* This function in called every 100 ticks to rebalance the queues. The current
* scheduler bumps processes down one priority when ever they run out of
* quantum. This function will find all proccesses that have been bumped down,
* and pulls them back up. This default policy will soon be changed.
*/
static void balance_queues(minix_timer_t *tp)
Scheduling server (by Bjorn Swift) In this second phase, scheduling is moved from PM to its own scheduler (see r6557 for phase one). In the next phase we hope to a) include useful information in the "out of quantum" message and b) create some simple scheduling policy that makes use of that information. When the system starts up, PM will iterate over its process table and ask SCHED to take over scheduling unprivileged processes. This is done by sending a SCHEDULING_START message to SCHED. This message includes the processes endpoint, the parent's endpoint and its nice level. The scheduler adds this process to its schedproc table, issues a schedctl, and returns its own endpoint to PM - as the endpoint of the effective scheduler. When a process terminates, a SCHEDULING_STOP message is sent to the scheduler. The reason for this effective endpoint is for future compatibility. Some day, we may have a scheduler that, instead of scheduling the process itself, forwards the SCHEDULING_START message on to another scheduler. PM has information on who schedules whom. As such, scheduling messages from user-land are sent through PM. An example is when processes change their priority, using nice(). In that case, a getsetpriority message is sent to PM, which then sends a SCHEDULING_SET_NICE to the process's effective scheduler. When a process is forked through PM, it inherits its parent's scheduler, but is spawned with an empty quantum. As before, a request to fork a process flows through VM before returning to PM, which then wakes up the child process. This flow has been modified slightly so that PM notifies the scheduler of the new process, before waking up the child process. If the scheduler fails to take over scheduling, the child process is torn down and the fork fails with an erroneous value. Process priority is entirely decided upon using nice levels. PM stores a copy of each process's nice level and when a child is forked, its parent's nice level is sent in the SCHEDULING_START message. How this level is mapped to a priority queue is up to the scheduler. It should be noted that the nice level is used to determine the max_priority and the parent could have been in a lower priority when it was spawned. To prevent a CPU intensive process from hawking the CPU by continuously forking children that get scheduled in the max_priority, the scheduler should determine in which queue the parent is currently scheduled, and schedule the child in that same queue. Other fixes: The USER_Q in kernel/proc.h was incorrectly defined as NR_SCHED_QUEUES/2. That results in a "off by one" error when converting priority->nice->priority for nice=0. This also had the side effect that if someone were to set the MAX_USER_Q to something else than 0, then USER_Q would be off.
2010-05-18 15:39:04 +02:00
{
struct schedproc *rmp;
int proc_nr;
for (proc_nr=0, rmp=schedproc; proc_nr < NR_PROCS; proc_nr++, rmp++) {
if (rmp->flags & IN_USE) {
if (rmp->priority > rmp->max_priority) {
rmp->priority -= 1; /* increase priority */
schedule_process_local(rmp);
Scheduling server (by Bjorn Swift) In this second phase, scheduling is moved from PM to its own scheduler (see r6557 for phase one). In the next phase we hope to a) include useful information in the "out of quantum" message and b) create some simple scheduling policy that makes use of that information. When the system starts up, PM will iterate over its process table and ask SCHED to take over scheduling unprivileged processes. This is done by sending a SCHEDULING_START message to SCHED. This message includes the processes endpoint, the parent's endpoint and its nice level. The scheduler adds this process to its schedproc table, issues a schedctl, and returns its own endpoint to PM - as the endpoint of the effective scheduler. When a process terminates, a SCHEDULING_STOP message is sent to the scheduler. The reason for this effective endpoint is for future compatibility. Some day, we may have a scheduler that, instead of scheduling the process itself, forwards the SCHEDULING_START message on to another scheduler. PM has information on who schedules whom. As such, scheduling messages from user-land are sent through PM. An example is when processes change their priority, using nice(). In that case, a getsetpriority message is sent to PM, which then sends a SCHEDULING_SET_NICE to the process's effective scheduler. When a process is forked through PM, it inherits its parent's scheduler, but is spawned with an empty quantum. As before, a request to fork a process flows through VM before returning to PM, which then wakes up the child process. This flow has been modified slightly so that PM notifies the scheduler of the new process, before waking up the child process. If the scheduler fails to take over scheduling, the child process is torn down and the fork fails with an erroneous value. Process priority is entirely decided upon using nice levels. PM stores a copy of each process's nice level and when a child is forked, its parent's nice level is sent in the SCHEDULING_START message. How this level is mapped to a priority queue is up to the scheduler. It should be noted that the nice level is used to determine the max_priority and the parent could have been in a lower priority when it was spawned. To prevent a CPU intensive process from hawking the CPU by continuously forking children that get scheduled in the max_priority, the scheduler should determine in which queue the parent is currently scheduled, and schedule the child in that same queue. Other fixes: The USER_Q in kernel/proc.h was incorrectly defined as NR_SCHED_QUEUES/2. That results in a "off by one" error when converting priority->nice->priority for nice=0. This also had the side effect that if someone were to set the MAX_USER_Q to something else than 0, then USER_Q would be off.
2010-05-18 15:39:04 +02:00
}
}
}
2010-07-09 14:58:18 +02:00
set_timer(&sched_timer, balance_timeout, balance_queues, 0);
Scheduling server (by Bjorn Swift) In this second phase, scheduling is moved from PM to its own scheduler (see r6557 for phase one). In the next phase we hope to a) include useful information in the "out of quantum" message and b) create some simple scheduling policy that makes use of that information. When the system starts up, PM will iterate over its process table and ask SCHED to take over scheduling unprivileged processes. This is done by sending a SCHEDULING_START message to SCHED. This message includes the processes endpoint, the parent's endpoint and its nice level. The scheduler adds this process to its schedproc table, issues a schedctl, and returns its own endpoint to PM - as the endpoint of the effective scheduler. When a process terminates, a SCHEDULING_STOP message is sent to the scheduler. The reason for this effective endpoint is for future compatibility. Some day, we may have a scheduler that, instead of scheduling the process itself, forwards the SCHEDULING_START message on to another scheduler. PM has information on who schedules whom. As such, scheduling messages from user-land are sent through PM. An example is when processes change their priority, using nice(). In that case, a getsetpriority message is sent to PM, which then sends a SCHEDULING_SET_NICE to the process's effective scheduler. When a process is forked through PM, it inherits its parent's scheduler, but is spawned with an empty quantum. As before, a request to fork a process flows through VM before returning to PM, which then wakes up the child process. This flow has been modified slightly so that PM notifies the scheduler of the new process, before waking up the child process. If the scheduler fails to take over scheduling, the child process is torn down and the fork fails with an erroneous value. Process priority is entirely decided upon using nice levels. PM stores a copy of each process's nice level and when a child is forked, its parent's nice level is sent in the SCHEDULING_START message. How this level is mapped to a priority queue is up to the scheduler. It should be noted that the nice level is used to determine the max_priority and the parent could have been in a lower priority when it was spawned. To prevent a CPU intensive process from hawking the CPU by continuously forking children that get scheduled in the max_priority, the scheduler should determine in which queue the parent is currently scheduled, and schedule the child in that same queue. Other fixes: The USER_Q in kernel/proc.h was incorrectly defined as NR_SCHED_QUEUES/2. That results in a "off by one" error when converting priority->nice->priority for nice=0. This also had the side effect that if someone were to set the MAX_USER_Q to something else than 0, then USER_Q would be off.
2010-05-18 15:39:04 +02:00
}