minix/tools/Makefile.gnuhost

#	$NetBSD: Makefile.gnuhost,v 1.42 2013/08/13 20:41:25 drochner Exp $
#
# Rules used when building a GNU host package.  Expects MODULE to be set.
#
# There's not a lot we can do to build reliably in the face of many
# available configuration options.  To be as low-overhead as possible,
# we follow the following scheme:
#
# * Configuration is only re-run when an autoconf source file (such as
#   "configure" or "config.sub") is changed.
#
# * "config.status" is run to rebuild Makefiles and .h files if an
#   autoconf-parsed file (such as Makefile.in) is changed.
#
# * If MKUPDATE != "no", "make install" is only run if a build has happened
#   since the last install in the current directory.

.include <bsd.own.mk>

# Disable use of pre-compiled headers on Darwin.
BUILD_OSTYPE!= uname -s
.if ${BUILD_OSTYPE} == "Darwin"
HOST_CFLAGS+=-O2 -no-cpp-precomp
.endif
MAKE_PROGRAM?=	${MAKE}

GNUHOSTDIST?=	${.CURDIR}/../../gnu/dist/${MODULE}

.if defined(__MINIX)
# AL - MINIX /usr/src does not have the sources for the GNU utilities
# in-tree (they are much bigger than Minix itself!) So to successfully
# use them while cross-compiling, we have to fetch them. The success of
# that operation is indicated by the presence of a .gitignore file in
# the corresponding ${.CURDIR}, which also conveniently hides from git.
.if exists(${GNUHOSTDIST:H}/fetch.sh)
${GNUHOSTDIST:H}/.gitignore: ${GNUHOSTDIST:H}/fetch.sh
	${HOST_SH} ${GNUHOSTDIST:H}/fetch.sh
	@test -e ${GNUHOSTDIST}/configure
	@echo "${MODULE:U${.CURDIR:T}:C,gcc[0-9]*,gcc,}-*.tar.*z*" >> $@
	@echo ${GNUHOSTDIST:T} >> $@
_gnu_get_src=${GNUHOSTDIST:H}/.gitignore
.endif # exists(GNUHOSTDIST:H/fetch.sh) on MINIX

# AL - Special target for MINIX, reset the source tree as pristine
.if ${CLEANFETCHED:Uno} == "yes" && exists(${GNUHOSTDIST:H}/fetch.sh)
cleandir: clean_gnu_src
clean_gnu_src:
	-rm -r -f ${GNUHOSTDIST} ${GNUHOSTDIST:H}/.gitignore
# XXX CHECKME: could have used the content of .gitignore as well?
.endif # CLEANFETCHED == yes
.endif # defined(__MINIX)

FIND_ARGS+=	\! \( -type d \( \
			-name 'CVS' -o \
			-name 'config' -o \
			-name 'doc' -o \
			-name 'po' -o \
			-name 'nbsd.mt' -o \
			-name 'tests*' \
		\) -prune \)

# Do this "find" only if actually building something.
# AL - ... and on MINIX, if the source has already being fetched
.if (${USETOOLS} == "yes") && empty(.MAKEFLAGS:M-V*) && \
    (make(all) || make(realall) || (!make(clean) && !make(cleandir) && !make(obj))) && \
    !defined(_GNU_CFGSRC) && exists(${GNUHOSTDIST}/configure)

_GNU_CFGSRC!=	find ${GNUHOSTDIST} ${FIND_ARGS} \
		-type f \( -name 'config*' -o -name '*.in' \) -print
.MAKEOVERRIDES+= _GNU_CFGSRC
.endif

CONFIGURE_ENV+= \
		AR=${HOST_AR:Q} \
		AWK=${TOOL_AWK:Q} \
		CC=${HOST_CC:Q} \
		CFLAGS=${HOST_CFLAGS:Q} \
		CONFIG_SHELL=${HOST_SH:Q} \
		CPPFLAGS=${HOST_CPPFLAGS:Q} \
		CXX=${HOST_CXX:Q} \
		CXXFLAGS=${HOST_CXXFLAGS:Q} \
		INSTALL=${HOST_INSTALL_FILE:Q} \
		LDFLAGS=${HOST_LDFLAGS:Q} \
		LEX=${LEX:Q} \
		M4=${TOOL_M4:Q} \
		MAKE=${MAKE_PROGRAM:Q} \
		PATH="${TOOLDIR}/bin:$$PATH" \
		RANLIB=${HOST_RANLIB:Q} \
		YACC=${YACC:Q}

BUILD_ENV+=	${CONFIGURE_ENV}

CONFIGURE_ARGS+=--prefix=${TOOLDIR}
.if ${MKPIC} == "no"
CONFIGURE_ARGS+=--disable-shared
.endif

.if ${MAKE_PROGRAM} == ${MAKE}
.ifndef _NOWRAPPER
# Some systems have a small ARG_MAX.  On such systems, prevent Make
# variables set on the command line from being exported in the
# environment (they will still be set in MAKEOVERRIDES).
.if ${BUILD_OSTYPE} == "Darwin" || ${BUILD_OSTYPE} == "FreeBSD"
__noenvexport=	-X
.endif
MAKE_ARGS:=	${__noenvexport} -f ${.PARSEDIR}/Makefile.gnuwrap ${MAKE_ARGS}
.else
MAKE_ARGS+=	_NOWRAPPER=1
.endif
BUILD_COMMAND=	${BUILD_ENV} ${MAKE} ${MAKE_ARGS}
.else

# gmake version of this puts MAKE_ARGS in the environment to be sure that
# sub-gmake's get them, otherwise tools/gcc tries to build libgcc and
# fails.  it also uses "env -i" to entirely clear out MAKEFLAGS.
GMAKE_J_ARGS?=	${MAKEFLAGS:[*]:M*-j*:C/.*(-j ?[0-9]*).*/\1/W}
BUILD_COMMAND=	/usr/bin/env -i ${BUILD_ENV} ${MAKE_ARGS} ${TOOL_GMAKE} ${GMAKE_J_ARGS} -e ${MAKE_ARGS}

.endif

MAKE_ARGS+=	BISON=true DESTDIR= INSTALL=${HOST_INSTALL_FILE:Q}

ALL_TARGET?=	all
INSTALL_TARGET?=install

BUILD_PLATFORM!= uname -srm | tr ' ()' '-'
CONFIGURE_PLATFORM!= if [ -s .configure_done ]; then cat .configure_done; else echo none; fi
.if "${BUILD_PLATFORM}" != "${CONFIGURE_PLATFORM}"
configure_cleanup:
	@mkdir build 2>/dev/null || true
	@(echo "Cleaning stale cache files ${BUILD_PLATFORM} != ${CONFIGURE_PLATFORM}")
	@(cd build && find . -name config.cache | xargs rm -f)
configure_cleanup=configure_cleanup
.endif

# AL For MINIX, fetch the source if not there
.configure_done: ${_gnu_get_src} .WAIT ${_GNU_CFGSRC} ${.CURDIR}/Makefile ${configure_cleanup}
	@mkdir build 2>/dev/null || true
	@(cd build && ${CONFIGURE_ENV} ${HOST_SH} ${GNUHOSTDIST}/configure ${CONFIGURE_ARGS})
	@echo ${BUILD_PLATFORM} > $@

# The .build_done timestamp is only updated if a file actually changes
# in the build tree during "make all".  This way, if nothing has changed,
# a "make install MKUPDATE=yes" will do nothing.

.build_done: .configure_done
	@(cd build && ${BUILD_COMMAND} ${ALL_TARGET})
	@if [ ! -f $@ ] || [ -n "$$(find build -type f -newer .build_done -print)" ]; \
		then touch $@; fi

.install_done! ${BUILD:D.build_done}
	@(cd ${.OBJDIR}/build && ${BUILD_COMMAND} ${INSTALL_TARGET})
	@touch $@

# Mapping to standard targets.

.if ${USETOOLS} == "yes"
realall: .build_done
realinstall: .install_done
.endif

clean: clean.gnu
clean.gnu:
	-rm -r -f .*_done build

.include <bsd.hostprog.mk>