sanchayanmaity/minix
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
minix/kernel/watchdog.c

114 lines
2.6 KiB
C
Raw Normal View History

NMI watchdog is an awesome feature for debugging locked up kernels. There is not that much use for it on a single CPU, however, deadlock between kernel and system task can be delected. Or a runaway loop. If a kernel gets locked up the timer interrupts don't occure (as all interrupts are disabled in kernel mode). The only chance is to interrupt the kernel by a non-maskable interrupt. This patch generates NMIs using performance counters. It uses the most widely available performace counters. As the performance counters are highly model-specific this patch is not guaranteed to work on every machine. Unfortunately this is also true for KVM :-/ On the other hand adding this feature for other models is not extremely difficult and the framework makes it hopefully easy enough. Depending on the frequency of the CPU an NMI is generated at most about every 0.5s If the cpu's speed is less then 2Ghz it is generated at most every 1s. In general an NMI is generated much less often as the performance counter counts down only if the cpu is not idle. Therefore the overhead of this feature is fairly minimal even if the load is high. Uppon detecting that the kernel is locked up the kernel dumps the state of the kernel registers and panics. Local APIC must be enabled for the watchdog to work. The code is _always_ compiled in, however, it is only enabled if watchdog=<non-zero> is set in the boot monitor. One corner case is serial console debugging. As dumping a lot of stuff to the serial link may take a lot of time, the watchdog does not detect lockups during this time!!! as it would result in too many false positives. 10 nmi have to be handled before the lockup is detected. This means something between ~5s to 10s. Another corner case is that the watchdog is enabled only after the paging is enabled as it would be pure madness to try to get it right.
2010-01-16 21:53:55 +01:00
/*
* This is arch independent NMI watchdog implementaion part. It is used to
* detect kernel lockups and help debugging. each architecture must add its own
* low level code that triggers periodic checks
*/
#include "watchdog.h"
SMP - We boot APs - kernel detects CPUs by searching ACPI tables for local apic nodes - each CPU has its own TSS that points to its own stack. All cpus boot on the same boot stack (in sequence) but switch to its private stack as soon as they can. - final booting code in main() placed in bsp_finish_booting() which is executed only after the BSP switches to its final stack - apic functions to send startup interrupts - assembler functions to handle CPU features not needed for single cpu mode like memory barries, HT detection etc. - new files kernel/smp.[ch], kernel/arch/i386/arch_smp.c and kernel/arch/i386/include/arch_smp.h - 16-bit trampoline code for the APs. It is executed by each AP after receiving startup IPIs it brings up the CPUs to 32bit mode and let them spin in an infinite loop so they don't do any damage. - implementation of kernel spinlock - CONFIG_SMP and CONFIG_MAX_CPUS set by the build system
2010-09-15 16:09:52 +02:00
#include "arch/i386/glo.h"
NMI sampling - if profile --nmi kernel uses NMI watchdog based sampling based on Intel architecture performance counters - using NMI makes kernel profiling possible - watchdog kernel lockup detection is disabled while sampling as we may get unpredictable interrupts in kernel and thus possibly many false positives - if watchdog is not enabled at boot time, profiling enables it and turns it of again when done
2010-09-23 12:49:45 +02:00
#include "profile.h"
NMI watchdog is an awesome feature for debugging locked up kernels. There is not that much use for it on a single CPU, however, deadlock between kernel and system task can be delected. Or a runaway loop. If a kernel gets locked up the timer interrupts don't occure (as all interrupts are disabled in kernel mode). The only chance is to interrupt the kernel by a non-maskable interrupt. This patch generates NMIs using performance counters. It uses the most widely available performace counters. As the performance counters are highly model-specific this patch is not guaranteed to work on every machine. Unfortunately this is also true for KVM :-/ On the other hand adding this feature for other models is not extremely difficult and the framework makes it hopefully easy enough. Depending on the frequency of the CPU an NMI is generated at most about every 0.5s If the cpu's speed is less then 2Ghz it is generated at most every 1s. In general an NMI is generated much less often as the performance counter counts down only if the cpu is not idle. Therefore the overhead of this feature is fairly minimal even if the load is high. Uppon detecting that the kernel is locked up the kernel dumps the state of the kernel registers and panics. Local APIC must be enabled for the watchdog to work. The code is _always_ compiled in, however, it is only enabled if watchdog=<non-zero> is set in the boot monitor. One corner case is serial console debugging. As dumping a lot of stuff to the serial link may take a lot of time, the watchdog does not detect lockups during this time!!! as it would result in too many false positives. 10 nmi have to be handled before the lockup is detected. This means something between ~5s to 10s. Another corner case is that the watchdog is enabled only after the paging is enabled as it would be pure madness to try to get it right.
2010-01-16 21:53:55 +01:00
Remove useless symbol declarations from headers, make symbols local where possible, add some explicit initialization to global variables.
2010-04-22 09:49:40 +02:00
unsigned watchdog_local_timer_ticks = 0U;
NMI watchdog is an awesome feature for debugging locked up kernels. There is not that much use for it on a single CPU, however, deadlock between kernel and system task can be delected. Or a runaway loop. If a kernel gets locked up the timer interrupts don't occure (as all interrupts are disabled in kernel mode). The only chance is to interrupt the kernel by a non-maskable interrupt. This patch generates NMIs using performance counters. It uses the most widely available performace counters. As the performance counters are highly model-specific this patch is not guaranteed to work on every machine. Unfortunately this is also true for KVM :-/ On the other hand adding this feature for other models is not extremely difficult and the framework makes it hopefully easy enough. Depending on the frequency of the CPU an NMI is generated at most about every 0.5s If the cpu's speed is less then 2Ghz it is generated at most every 1s. In general an NMI is generated much less often as the performance counter counts down only if the cpu is not idle. Therefore the overhead of this feature is fairly minimal even if the load is high. Uppon detecting that the kernel is locked up the kernel dumps the state of the kernel registers and panics. Local APIC must be enabled for the watchdog to work. The code is _always_ compiled in, however, it is only enabled if watchdog=<non-zero> is set in the boot monitor. One corner case is serial console debugging. As dumping a lot of stuff to the serial link may take a lot of time, the watchdog does not detect lockups during this time!!! as it would result in too many false positives. 10 nmi have to be handled before the lockup is detected. This means something between ~5s to 10s. Another corner case is that the watchdog is enabled only after the paging is enabled as it would be pure madness to try to get it right.
2010-01-16 21:53:55 +01:00
struct arch_watchdog *watchdog;
int watchdog_enabled;
NMI sampling - if profile --nmi kernel uses NMI watchdog based sampling based on Intel architecture performance counters - using NMI makes kernel profiling possible - watchdog kernel lockup detection is disabled while sampling as we may get unpredictable interrupts in kernel and thus possibly many false positives - if watchdog is not enabled at boot time, profiling enables it and turns it of again when done
2010-09-23 12:49:45 +02:00
PRIVATE void lockup_check(struct nmi_frame * frame)
NMI watchdog is an awesome feature for debugging locked up kernels. There is not that much use for it on a single CPU, however, deadlock between kernel and system task can be delected. Or a runaway loop. If a kernel gets locked up the timer interrupts don't occure (as all interrupts are disabled in kernel mode). The only chance is to interrupt the kernel by a non-maskable interrupt. This patch generates NMIs using performance counters. It uses the most widely available performace counters. As the performance counters are highly model-specific this patch is not guaranteed to work on every machine. Unfortunately this is also true for KVM :-/ On the other hand adding this feature for other models is not extremely difficult and the framework makes it hopefully easy enough. Depending on the frequency of the CPU an NMI is generated at most about every 0.5s If the cpu's speed is less then 2Ghz it is generated at most every 1s. In general an NMI is generated much less often as the performance counter counts down only if the cpu is not idle. Therefore the overhead of this feature is fairly minimal even if the load is high. Uppon detecting that the kernel is locked up the kernel dumps the state of the kernel registers and panics. Local APIC must be enabled for the watchdog to work. The code is _always_ compiled in, however, it is only enabled if watchdog=<non-zero> is set in the boot monitor. One corner case is serial console debugging. As dumping a lot of stuff to the serial link may take a lot of time, the watchdog does not detect lockups during this time!!! as it would result in too many false positives. 10 nmi have to be handled before the lockup is detected. This means something between ~5s to 10s. Another corner case is that the watchdog is enabled only after the paging is enabled as it would be pure madness to try to get it right.
2010-01-16 21:53:55 +01:00
{
/* FIXME this should be CPU local */
static unsigned no_ticks;
static unsigned last_tick_count = (unsigned) -1;
/*
* when debugging on serial console, printing takes a lot of time some
* times while the kernel is certainly not locked up. We don't want to
* report a lockup in such situation
*/
if (serial_debug_active)
NMI sampling - if profile --nmi kernel uses NMI watchdog based sampling based on Intel architecture performance counters - using NMI makes kernel profiling possible - watchdog kernel lockup detection is disabled while sampling as we may get unpredictable interrupts in kernel and thus possibly many false positives - if watchdog is not enabled at boot time, profiling enables it and turns it of again when done
2010-09-23 12:49:45 +02:00
return;
NMI watchdog is an awesome feature for debugging locked up kernels. There is not that much use for it on a single CPU, however, deadlock between kernel and system task can be delected. Or a runaway loop. If a kernel gets locked up the timer interrupts don't occure (as all interrupts are disabled in kernel mode). The only chance is to interrupt the kernel by a non-maskable interrupt. This patch generates NMIs using performance counters. It uses the most widely available performace counters. As the performance counters are highly model-specific this patch is not guaranteed to work on every machine. Unfortunately this is also true for KVM :-/ On the other hand adding this feature for other models is not extremely difficult and the framework makes it hopefully easy enough. Depending on the frequency of the CPU an NMI is generated at most about every 0.5s If the cpu's speed is less then 2Ghz it is generated at most every 1s. In general an NMI is generated much less often as the performance counter counts down only if the cpu is not idle. Therefore the overhead of this feature is fairly minimal even if the load is high. Uppon detecting that the kernel is locked up the kernel dumps the state of the kernel registers and panics. Local APIC must be enabled for the watchdog to work. The code is _always_ compiled in, however, it is only enabled if watchdog=<non-zero> is set in the boot monitor. One corner case is serial console debugging. As dumping a lot of stuff to the serial link may take a lot of time, the watchdog does not detect lockups during this time!!! as it would result in too many false positives. 10 nmi have to be handled before the lockup is detected. This means something between ~5s to 10s. Another corner case is that the watchdog is enabled only after the paging is enabled as it would be pure madness to try to get it right.
2010-01-16 21:53:55 +01:00
if (last_tick_count != watchdog_local_timer_ticks) {
if (no_ticks == 1) {
no more kprintf - kernel uses libsys printf now, only kputc is special to the kernel.
2010-03-03 16:45:01 +01:00
printf("watchdog : kernel unlocked\n");
NMI watchdog is an awesome feature for debugging locked up kernels. There is not that much use for it on a single CPU, however, deadlock between kernel and system task can be delected. Or a runaway loop. If a kernel gets locked up the timer interrupts don't occure (as all interrupts are disabled in kernel mode). The only chance is to interrupt the kernel by a non-maskable interrupt. This patch generates NMIs using performance counters. It uses the most widely available performace counters. As the performance counters are highly model-specific this patch is not guaranteed to work on every machine. Unfortunately this is also true for KVM :-/ On the other hand adding this feature for other models is not extremely difficult and the framework makes it hopefully easy enough. Depending on the frequency of the CPU an NMI is generated at most about every 0.5s If the cpu's speed is less then 2Ghz it is generated at most every 1s. In general an NMI is generated much less often as the performance counter counts down only if the cpu is not idle. Therefore the overhead of this feature is fairly minimal even if the load is high. Uppon detecting that the kernel is locked up the kernel dumps the state of the kernel registers and panics. Local APIC must be enabled for the watchdog to work. The code is _always_ compiled in, however, it is only enabled if watchdog=<non-zero> is set in the boot monitor. One corner case is serial console debugging. As dumping a lot of stuff to the serial link may take a lot of time, the watchdog does not detect lockups during this time!!! as it would result in too many false positives. 10 nmi have to be handled before the lockup is detected. This means something between ~5s to 10s. Another corner case is that the watchdog is enabled only after the paging is enabled as it would be pure madness to try to get it right.
2010-01-16 21:53:55 +01:00
no_ticks = 0;
}
/* we are still ticking, everything seems good */
last_tick_count = watchdog_local_timer_ticks;
NMI sampling - if profile --nmi kernel uses NMI watchdog based sampling based on Intel architecture performance counters - using NMI makes kernel profiling possible - watchdog kernel lockup detection is disabled while sampling as we may get unpredictable interrupts in kernel and thus possibly many false positives - if watchdog is not enabled at boot time, profiling enables it and turns it of again when done
2010-09-23 12:49:45 +02:00
return;
NMI watchdog is an awesome feature for debugging locked up kernels. There is not that much use for it on a single CPU, however, deadlock between kernel and system task can be delected. Or a runaway loop. If a kernel gets locked up the timer interrupts don't occure (as all interrupts are disabled in kernel mode). The only chance is to interrupt the kernel by a non-maskable interrupt. This patch generates NMIs using performance counters. It uses the most widely available performace counters. As the performance counters are highly model-specific this patch is not guaranteed to work on every machine. Unfortunately this is also true for KVM :-/ On the other hand adding this feature for other models is not extremely difficult and the framework makes it hopefully easy enough. Depending on the frequency of the CPU an NMI is generated at most about every 0.5s If the cpu's speed is less then 2Ghz it is generated at most every 1s. In general an NMI is generated much less often as the performance counter counts down only if the cpu is not idle. Therefore the overhead of this feature is fairly minimal even if the load is high. Uppon detecting that the kernel is locked up the kernel dumps the state of the kernel registers and panics. Local APIC must be enabled for the watchdog to work. The code is _always_ compiled in, however, it is only enabled if watchdog=<non-zero> is set in the boot monitor. One corner case is serial console debugging. As dumping a lot of stuff to the serial link may take a lot of time, the watchdog does not detect lockups during this time!!! as it would result in too many false positives. 10 nmi have to be handled before the lockup is detected. This means something between ~5s to 10s. Another corner case is that the watchdog is enabled only after the paging is enabled as it would be pure madness to try to get it right.
2010-01-16 21:53:55 +01:00
}
/*
* if watchdog_local_timer_ticks didn't changed since last time, give it
* some more time and only if it still dead, trigger the watchdog alarm
*/
if (++no_ticks < 10) {
if (no_ticks == 1)
no more kprintf - kernel uses libsys printf now, only kputc is special to the kernel.
2010-03-03 16:45:01 +01:00
printf("WARNING watchdog : possible kernel lockup\n");
NMI sampling - if profile --nmi kernel uses NMI watchdog based sampling based on Intel architecture performance counters - using NMI makes kernel profiling possible - watchdog kernel lockup detection is disabled while sampling as we may get unpredictable interrupts in kernel and thus possibly many false positives - if watchdog is not enabled at boot time, profiling enables it and turns it of again when done
2010-09-23 12:49:45 +02:00
return;
NMI watchdog is an awesome feature for debugging locked up kernels. There is not that much use for it on a single CPU, however, deadlock between kernel and system task can be delected. Or a runaway loop. If a kernel gets locked up the timer interrupts don't occure (as all interrupts are disabled in kernel mode). The only chance is to interrupt the kernel by a non-maskable interrupt. This patch generates NMIs using performance counters. It uses the most widely available performace counters. As the performance counters are highly model-specific this patch is not guaranteed to work on every machine. Unfortunately this is also true for KVM :-/ On the other hand adding this feature for other models is not extremely difficult and the framework makes it hopefully easy enough. Depending on the frequency of the CPU an NMI is generated at most about every 0.5s If the cpu's speed is less then 2Ghz it is generated at most every 1s. In general an NMI is generated much less often as the performance counter counts down only if the cpu is not idle. Therefore the overhead of this feature is fairly minimal even if the load is high. Uppon detecting that the kernel is locked up the kernel dumps the state of the kernel registers and panics. Local APIC must be enabled for the watchdog to work. The code is _always_ compiled in, however, it is only enabled if watchdog=<non-zero> is set in the boot monitor. One corner case is serial console debugging. As dumping a lot of stuff to the serial link may take a lot of time, the watchdog does not detect lockups during this time!!! as it would result in too many false positives. 10 nmi have to be handled before the lockup is detected. This means something between ~5s to 10s. Another corner case is that the watchdog is enabled only after the paging is enabled as it would be pure madness to try to get it right.
2010-01-16 21:53:55 +01:00
}
NMI sampling - if profile --nmi kernel uses NMI watchdog based sampling based on Intel architecture performance counters - using NMI makes kernel profiling possible - watchdog kernel lockup detection is disabled while sampling as we may get unpredictable interrupts in kernel and thus possibly many false positives - if watchdog is not enabled at boot time, profiling enables it and turns it of again when done
2010-09-23 12:49:45 +02:00
/* if we get this far, the kernel is locked up */
NMI watchdog is an awesome feature for debugging locked up kernels. There is not that much use for it on a single CPU, however, deadlock between kernel and system task can be delected. Or a runaway loop. If a kernel gets locked up the timer interrupts don't occure (as all interrupts are disabled in kernel mode). The only chance is to interrupt the kernel by a non-maskable interrupt. This patch generates NMIs using performance counters. It uses the most widely available performace counters. As the performance counters are highly model-specific this patch is not guaranteed to work on every machine. Unfortunately this is also true for KVM :-/ On the other hand adding this feature for other models is not extremely difficult and the framework makes it hopefully easy enough. Depending on the frequency of the CPU an NMI is generated at most about every 0.5s If the cpu's speed is less then 2Ghz it is generated at most every 1s. In general an NMI is generated much less often as the performance counter counts down only if the cpu is not idle. Therefore the overhead of this feature is fairly minimal even if the load is high. Uppon detecting that the kernel is locked up the kernel dumps the state of the kernel registers and panics. Local APIC must be enabled for the watchdog to work. The code is _always_ compiled in, however, it is only enabled if watchdog=<non-zero> is set in the boot monitor. One corner case is serial console debugging. As dumping a lot of stuff to the serial link may take a lot of time, the watchdog does not detect lockups during this time!!! as it would result in too many false positives. 10 nmi have to be handled before the lockup is detected. This means something between ~5s to 10s. Another corner case is that the watchdog is enabled only after the paging is enabled as it would be pure madness to try to get it right.
2010-01-16 21:53:55 +01:00
arch_watchdog_lockup(frame);
NMI sampling - if profile --nmi kernel uses NMI watchdog based sampling based on Intel architecture performance counters - using NMI makes kernel profiling possible - watchdog kernel lockup detection is disabled while sampling as we may get unpredictable interrupts in kernel and thus possibly many false positives - if watchdog is not enabled at boot time, profiling enables it and turns it of again when done
2010-09-23 12:49:45 +02:00
}
NMI watchdog is an awesome feature for debugging locked up kernels. There is not that much use for it on a single CPU, however, deadlock between kernel and system task can be delected. Or a runaway loop. If a kernel gets locked up the timer interrupts don't occure (as all interrupts are disabled in kernel mode). The only chance is to interrupt the kernel by a non-maskable interrupt. This patch generates NMIs using performance counters. It uses the most widely available performace counters. As the performance counters are highly model-specific this patch is not guaranteed to work on every machine. Unfortunately this is also true for KVM :-/ On the other hand adding this feature for other models is not extremely difficult and the framework makes it hopefully easy enough. Depending on the frequency of the CPU an NMI is generated at most about every 0.5s If the cpu's speed is less then 2Ghz it is generated at most every 1s. In general an NMI is generated much less often as the performance counter counts down only if the cpu is not idle. Therefore the overhead of this feature is fairly minimal even if the load is high. Uppon detecting that the kernel is locked up the kernel dumps the state of the kernel registers and panics. Local APIC must be enabled for the watchdog to work. The code is _always_ compiled in, however, it is only enabled if watchdog=<non-zero> is set in the boot monitor. One corner case is serial console debugging. As dumping a lot of stuff to the serial link may take a lot of time, the watchdog does not detect lockups during this time!!! as it would result in too many false positives. 10 nmi have to be handled before the lockup is detected. This means something between ~5s to 10s. Another corner case is that the watchdog is enabled only after the paging is enabled as it would be pure madness to try to get it right.
2010-01-16 21:53:55 +01:00
NMI sampling - if profile --nmi kernel uses NMI watchdog based sampling based on Intel architecture performance counters - using NMI makes kernel profiling possible - watchdog kernel lockup detection is disabled while sampling as we may get unpredictable interrupts in kernel and thus possibly many false positives - if watchdog is not enabled at boot time, profiling enables it and turns it of again when done
2010-09-23 12:49:45 +02:00
PUBLIC void nmi_watchdog_handler(struct nmi_frame * frame)
{
Fix for SPROFILE == 0 - contributed by Antoine Leca
2011-05-25 09:42:11 +02:00
#if SPROFILE
NMI sampling - if profile --nmi kernel uses NMI watchdog based sampling based on Intel architecture performance counters - using NMI makes kernel profiling possible - watchdog kernel lockup detection is disabled while sampling as we may get unpredictable interrupts in kernel and thus possibly many false positives - if watchdog is not enabled at boot time, profiling enables it and turns it of again when done
2010-09-23 12:49:45 +02:00
/*
* Do not check for lockups while profiling, it is extremely likely that
* a false positive is detected if the frequency is high
*/
if (watchdog_enabled && !sprofiling)
lockup_check(frame);
if (sprofiling)
nmi_sprofile_handler(frame);
if ((watchdog_enabled || sprofiling) && watchdog->reinit)
NMI watchdog is an awesome feature for debugging locked up kernels. There is not that much use for it on a single CPU, however, deadlock between kernel and system task can be delected. Or a runaway loop. If a kernel gets locked up the timer interrupts don't occure (as all interrupts are disabled in kernel mode). The only chance is to interrupt the kernel by a non-maskable interrupt. This patch generates NMIs using performance counters. It uses the most widely available performace counters. As the performance counters are highly model-specific this patch is not guaranteed to work on every machine. Unfortunately this is also true for KVM :-/ On the other hand adding this feature for other models is not extremely difficult and the framework makes it hopefully easy enough. Depending on the frequency of the CPU an NMI is generated at most about every 0.5s If the cpu's speed is less then 2Ghz it is generated at most every 1s. In general an NMI is generated much less often as the performance counter counts down only if the cpu is not idle. Therefore the overhead of this feature is fairly minimal even if the load is high. Uppon detecting that the kernel is locked up the kernel dumps the state of the kernel registers and panics. Local APIC must be enabled for the watchdog to work. The code is _always_ compiled in, however, it is only enabled if watchdog=<non-zero> is set in the boot monitor. One corner case is serial console debugging. As dumping a lot of stuff to the serial link may take a lot of time, the watchdog does not detect lockups during this time!!! as it would result in too many false positives. 10 nmi have to be handled before the lockup is detected. This means something between ~5s to 10s. Another corner case is that the watchdog is enabled only after the paging is enabled as it would be pure madness to try to get it right.
2010-01-16 21:53:55 +01:00
watchdog->reinit(cpuid);
Fix for SPROFILE == 0 - contributed by Antoine Leca
2011-05-25 09:42:11 +02:00
#else
if (watchdog_enabled) {
lockup_check(frame);
if (watchdog->reinit)
watchdog->reinit(cpuid);
}
#endif
NMI watchdog is an awesome feature for debugging locked up kernels. There is not that much use for it on a single CPU, however, deadlock between kernel and system task can be delected. Or a runaway loop. If a kernel gets locked up the timer interrupts don't occure (as all interrupts are disabled in kernel mode). The only chance is to interrupt the kernel by a non-maskable interrupt. This patch generates NMIs using performance counters. It uses the most widely available performace counters. As the performance counters are highly model-specific this patch is not guaranteed to work on every machine. Unfortunately this is also true for KVM :-/ On the other hand adding this feature for other models is not extremely difficult and the framework makes it hopefully easy enough. Depending on the frequency of the CPU an NMI is generated at most about every 0.5s If the cpu's speed is less then 2Ghz it is generated at most every 1s. In general an NMI is generated much less often as the performance counter counts down only if the cpu is not idle. Therefore the overhead of this feature is fairly minimal even if the load is high. Uppon detecting that the kernel is locked up the kernel dumps the state of the kernel registers and panics. Local APIC must be enabled for the watchdog to work. The code is _always_ compiled in, however, it is only enabled if watchdog=<non-zero> is set in the boot monitor. One corner case is serial console debugging. As dumping a lot of stuff to the serial link may take a lot of time, the watchdog does not detect lockups during this time!!! as it would result in too many false positives. 10 nmi have to be handled before the lockup is detected. This means something between ~5s to 10s. Another corner case is that the watchdog is enabled only after the paging is enabled as it would be pure madness to try to get it right.
2010-01-16 21:53:55 +01:00
}
NMI sampling - if profile --nmi kernel uses NMI watchdog based sampling based on Intel architecture performance counters - using NMI makes kernel profiling possible - watchdog kernel lockup detection is disabled while sampling as we may get unpredictable interrupts in kernel and thus possibly many false positives - if watchdog is not enabled at boot time, profiling enables it and turns it of again when done
2010-09-23 12:49:45 +02:00
int nmi_watchdog_start_profiling(const unsigned freq)
{
int err;
/* if watchdog hasn't been enabled, we must enable it now */
if (!watchdog_enabled) {
if (arch_watchdog_init())
return ENODEV;
}
if (!watchdog->profile_init) {
printf("WARNING NMI watchdog profiling not supported\n");
nmi_watchdog_stop_profiling();
return ENODEV;
}
err = watchdog->profile_init(freq);
if (err != OK)
return err;
watchdog->resetval = watchdog->profile_resetval;
return OK;
}
void nmi_watchdog_stop_profiling(void)
{
/*
* if we do not rearm the NMI source, we are done, if we want to keep
* the watchdog running, we reset is to its normal value
*/
if (watchdog)
watchdog->resetval = watchdog->watchdog_resetval;
if (!watchdog_enabled)
arch_watchdog_stop();
}
Reference in a new issue Copy permalink