NMI sampling

- if profile --nmi kernel uses NMI watchdog based sampling based on
  Intel architecture performance counters

- using NMI makes kernel profiling possible

- watchdog kernel lockup detection is disabled while sampling as we
  may get unpredictable interrupts in kernel and thus possibly many
  false positives

- if watchdog is not enabled at boot time, profiling enables it and
  turns it of again when done

kernel/arch/i386/arch_watchdog.c

@@ -18,7 +18,9 @@
  * Intel architecture performance counters watchdog
  */
 
-PRIVATE void intel_arch_watchdog_init(int cpu)
+PRIVATE struct arch_watchdog intel_arch_watchdog;
+
+PRIVATE void intel_arch_watchdog_init(const unsigned cpu)
 {
 	u64_t cpuf;
 	u32_t val;
@@ -36,7 +38,7 @@ PRIVATE void intel_arch_watchdog_init(int cpu)
 	cpuf = cpu_get_freq(cpu);
 	while (cpuf.hi || cpuf.lo > 0x7fffffffU)
 		cpuf = div64u64(cpuf, 2);
-	watchdog->resetval = cpuf.lo;
+	watchdog->resetval = watchdog->watchdog_resetval = cpuf.lo;
 
 	ia32_msr_write(MSR_PERFMON_CRT0, 0, -cpuf.lo);
 
@@ -46,21 +48,21 @@ PRIVATE void intel_arch_watchdog_init(int cpu)
 	lapic_write(LAPIC_LVTPCR, APIC_ICR_DM_NMI);
 }
 
-PRIVATE void intel_arch_watchdog_reinit(const int cpu)
+PRIVATE void intel_arch_watchdog_reinit(const unsigned cpu)
 {
 	lapic_write(LAPIC_LVTPCR, APIC_ICR_DM_NMI);
 	ia32_msr_write(MSR_PERFMON_CRT0, 0, -watchdog->resetval);
 }
 
-PRIVATE struct arch_watchdog intel_arch_watchdog = {
-	/*.init = */	intel_arch_watchdog_init,
-	/*.reinit = */	intel_arch_watchdog_reinit
-};
-
-int arch_watchdog_init(void)
+PUBLIC int arch_watchdog_init(void)
 {
 	u32_t eax, ebx, ecx, edx;
 
+	if (!lapic_addr) {
+		printf("ERROR : Cannot use NMI watchdog if APIC is not enabled\n");
+		return -1;
+	}
+
 	eax = 0xA;
 
 	_cpuid(&eax, &ebx, &ecx, &edx);
@@ -81,14 +83,18 @@ int arch_watchdog_init(void)
 	(void) lapic_read(LAPIC_LVTPCR);
 
 	/* double check if LAPIC is enabled */
-	if (lapic_addr && watchdog_enabled && watchdog->init) {
+	if (lapic_addr && watchdog->init) {
 		watchdog->init(cpuid);
 	}
 
 	return 0;
 }
 
-void arch_watchdog_lockup(const struct nmi_frame * frame)
+PUBLIC void arch_watchdog_stop(void)
+{
+}
+
+PUBLIC void arch_watchdog_lockup(const struct nmi_frame * frame)
 {
 	printf("KERNEL LOCK UP\n"
 			"eax    0x%08x\n"
@@ -123,15 +129,44 @@ void arch_watchdog_lockup(const struct nmi_frame * frame)
 	panic("Kernel lockup");
 }
 
-void i386_watchdog_start(void)
+PUBLIC int i386_watchdog_start(void)
 {
-	if (watchdog_enabled) {
-		if (arch_watchdog_init()) {
-			printf("WARNING watchdog initialization "
-					"failed! Disabled\n");
-			watchdog_enabled = 0;
-		}
-		else
-			BOOT_VERBOSE(printf("Watchdog enabled\n"););
+	if (arch_watchdog_init()) {
+		printf("WARNING watchdog initialization "
+				"failed! Disabled\n");
+		watchdog_enabled = 0;
+		return -1;
 	}
+	else
+		BOOT_VERBOSE(printf("Watchdog enabled\n"););
+
+	return 0;
 }
+
+PRIVATE int intel_arch_watchdog_profile_init(const unsigned freq)
+{
+	u64_t cpuf;
+
+	/* FIXME works only if all CPUs have the same freq */
+	cpuf = cpu_get_freq(cpuid);
+	cpuf = div64u64(cpuf, freq);
+
+	/*
+	 * if freq is too low and the cpu freq too high we may get in a range of
+	 * insane value which cannot be handled by the 31bit CPU perf counter
+	 */
+	if (cpuf.hi != 0 || cpuf.lo > 0x7fffffffU) {
+		printf("ERROR : nmi watchdog ticks exceed 31bits, use higher frequency\n");
+		return EINVAL;
+	}
+
+	watchdog->profile_resetval = cpuf.lo;
+
+	return OK;
+}
+
+PRIVATE struct arch_watchdog intel_arch_watchdog = {
+	/*.init = */		intel_arch_watchdog_init,
+	/*.reinit = */		intel_arch_watchdog_reinit,
+	/*.profile_init = */	intel_arch_watchdog_profile_init
+};

kernel/arch/i386/include/arch_watchdog.h

@@ -21,6 +21,8 @@ struct nmi_frame {
 	reg_t	eflags;
 };
 
-void i386_watchdog_start(void);
+_PROTOTYPE(int i386_watchdog_start, (void));
+
+#define nmi_in_kernel(f)	((f)->cs == CS_SELECTOR)
 
 #endif /* __I386_WATCHDOG_H__ */

kernel/arch/i386/memory.c

@@ -1103,11 +1103,12 @@ PUBLIC int arch_enable_paging(struct proc * caller, const message * m_ptr)
 #ifdef CONFIG_WATCHDOG
 	/*
 	 * We make sure that we don't enable the watchdog until paging is turned
-	 * on as we might get a NMI while switching and we might still use wrong
+	 * on as we might get an NMI while switching and we might still use wrong
 	 * lapic address. Bad things would happen. It is unfortunate but such is
 	 * life
 	 */
-	i386_watchdog_start();
+	if (watchdog_enabled)
+		i386_watchdog_start();
 #endif
 
 	return OK;

kernel/profile.c

@@ -26,6 +26,7 @@
 #if SPROFILE
 
 #include <string.h>
+#include "watchdog.h"
 
 /* Function prototype for the profiling clock handler. */ 
 FORWARD _PROTOTYPE( int profile_clock_handler, (irq_hook_t *hook) );
@@ -90,25 +91,20 @@ PRIVATE sprof_save_proc(struct proc * p)
 	sprof_info.mem_used += sizeof(s);
 }
 
-/*===========================================================================*
- *			profile_clock_handler                           *
- *===========================================================================*/
-PRIVATE int profile_clock_handler(irq_hook_t *hook)
+PRIVATE void profile_sample(struct proc * p)
 {
-  struct proc * p;
 /* This executes on every tick of the CMOS timer. */
 
   /* Are we profiling, and profiling memory not full? */
-  if (!sprofiling || sprof_info.mem_used == -1) return (1);
+  if (!sprofiling || sprof_info.mem_used == -1)
+	  return;
 
   /* Check if enough memory available before writing sample. */
   if (sprof_info.mem_used + sizeof(sprof_info) > sprof_mem_size) {
 	sprof_info.mem_used = -1;
-	return(1);
+	return;
   }
 
-  p = get_cpulocal_var(proc_ptr);
-
   if (!(p->p_misc_flags & MF_SPROF_SEEN)) {
 	  p->p_misc_flags |= MF_SPROF_SEEN;
 	  sprof_save_proc(p);
@@ -126,6 +122,17 @@ PRIVATE int profile_clock_handler(irq_hook_t *hook)
   }
   
   sprof_info.total_samples++;
+}
+
+/*===========================================================================*
+ *			profile_clock_handler                           *
+ *===========================================================================*/
+PRIVATE int profile_clock_handler(irq_hook_t *hook)
+{
+  struct proc * p;
+  p = get_cpulocal_var(proc_ptr);
+
+  profile_sample(p);
 
   /* Acknowledge interrupt if necessary. */
   arch_ack_profile_clock();
@@ -133,6 +140,25 @@ PRIVATE int profile_clock_handler(irq_hook_t *hook)
   return(1);                                    /* reenable interrupts */
 }
 
+PUBLIC void nmi_sprofile_handler(struct nmi_frame * frame)
+{
+	/*
+	 * test if the kernel was interrupted. If so, save first a sample fo
+	 * kernel and than for the current process, otherwise save just the
+	 * process
+	 */
+	if (nmi_in_kernel(frame)) {
+		struct proc *kern;
+
+		kern = proc_addr(KERNEL);
+		kern->p_reg.pc = frame->pc;
+
+		profile_sample(kern);
+	}
+	
+	profile_sample(get_cpulocal_var(proc_ptr));
+}
+
 #endif /* SPROFILE */
 
 #if CPROFILE

kernel/profile.h

@@ -5,12 +5,17 @@
 
 #if SPROFILE	/* statistical profiling */
 
+#include "arch_watchdog.h"
+
 EXTERN int sprofiling;			/* whether profiling is running */
+EXTERN int sprofiling_type;			/* whether profiling is running */
 EXTERN int sprof_mem_size;		/* available user memory for data */
 EXTERN struct sprof_info_s sprof_info;	/* profiling info for user program */
 EXTERN vir_bytes sprof_data_addr_vir;	/* user address to write data */
 EXTERN endpoint_t sprof_ep;		/* user process */
 
+_PROTOTYPE(void nmi_sprofile_handler, (struct nmi_frame * frame));
+
 #endif /* SPROFILE */
 
 

kernel/system/do_sprofile.c

@@ -34,6 +34,7 @@ PRIVATE clean_seen_flag(void)
 PUBLIC int do_sprofile(struct proc * caller, message * m_ptr)
 {
   int proc_nr;
+  int err;
 
   switch(m_ptr->PROF_ACTION) {
 
@@ -66,7 +67,19 @@ PUBLIC int do_sprofile(struct proc * caller, message * m_ptr)
 
 	sprof_mem_size = m_ptr->PROF_MEM_SIZE;
 
-	init_profile_clock(m_ptr->PROF_FREQ);
+	switch (sprofiling_type = m_ptr->PROF_INTR_TYPE) {
+		case PROF_RTC:
+			init_profile_clock(m_ptr->PROF_FREQ);
+			break;
+		case PROF_NMI:
+			err = nmi_watchdog_start_profiling(m_ptr->PROF_FREQ);
+			if (err)
+				return err;
+			break;
+		default:
+			printf("ERROR : unknown profiling interrupt type\n");
+			return EINVAL;
+	}
 	
 	sprofiling = 1;
 
@@ -87,7 +100,14 @@ PUBLIC int do_sprofile(struct proc * caller, message * m_ptr)
 
 	sprofiling = 0;
 
-	stop_profile_clock();
+	switch (sprofiling_type) {
+		case PROF_RTC:
+			stop_profile_clock();
+			break;
+		case PROF_NMI:
+			nmi_watchdog_stop_profiling();
+			break;
+	}
 
 	data_copy(KERNEL, (vir_bytes) &sprof_info,
 		sprof_ep, sprof_info_addr_vir, sizeof(sprof_info));

kernel/watchdog.c

@@ -6,12 +6,13 @@
 
 #include "watchdog.h"
 #include "arch/i386/glo.h"
+#include "profile.h"
 
 unsigned watchdog_local_timer_ticks = 0U;
 struct arch_watchdog *watchdog;
 int watchdog_enabled;
 
-void nmi_watchdog_handler(struct nmi_frame * frame)
+PRIVATE void lockup_check(struct nmi_frame * frame)
 {
 	/* FIXME this should be CPU local */
 	static unsigned no_ticks;
@@ -23,7 +24,7 @@ void nmi_watchdog_handler(struct nmi_frame * frame)
 	 * report a lockup in such situation
 	 */
 	if (serial_debug_active)
-		goto reset_and_continue;
+		return;
 
 	if (last_tick_count != watchdog_local_timer_ticks) {
 		if (no_ticks == 1) {
@@ -32,7 +33,7 @@ void nmi_watchdog_handler(struct nmi_frame * frame)
 		}
 		/* we are still ticking, everything seems good */
 		last_tick_count = watchdog_local_timer_ticks;
-		goto reset_and_continue;
+		return;
 	}
 
 	/*
@@ -42,12 +43,63 @@ void nmi_watchdog_handler(struct nmi_frame * frame)
 	if (++no_ticks < 10) {
 		if (no_ticks == 1)
 			printf("WARNING watchdog : possible kernel lockup\n");
-		goto reset_and_continue;
+		return;
 	}
 
+	/* if we get this far, the kernel is locked up */
 	arch_watchdog_lockup(frame);
+}
 
-reset_and_continue:
-	if (watchdog->reinit)
+PUBLIC void nmi_watchdog_handler(struct nmi_frame * frame)
+{
+	/*
+	 * Do not check for lockups while profiling, it is extremely likely that
+	 * a false positive is detected if the frequency is high
+	 */
+	if (watchdog_enabled && !sprofiling)
+		lockup_check(frame);
+	if (sprofiling)
+		nmi_sprofile_handler(frame);
+	
+	if ((watchdog_enabled || sprofiling) && watchdog->reinit)
 		watchdog->reinit(cpuid);
 }
+
+int nmi_watchdog_start_profiling(const unsigned freq)
+{
+	int err;
+	
+	/* if watchdog hasn't been enabled, we must enable it now */
+	if (!watchdog_enabled) {
+		if (arch_watchdog_init())
+			return ENODEV;
+	}
+
+	if (!watchdog->profile_init) {
+		printf("WARNING NMI watchdog profiling not supported\n");
+		nmi_watchdog_stop_profiling();
+		return ENODEV;
+	}
+
+	err = watchdog->profile_init(freq);
+	if (err != OK)
+		return err;
+
+	watchdog->resetval = watchdog->profile_resetval;
+
+	return OK;
+}
+
+void nmi_watchdog_stop_profiling(void)
+{
+	/*
+	 * if we do not rearm the NMI source, we are done, if we want to keep
+	 * the watchdog running, we reset is to its normal value
+	 */
+
+	if (watchdog)
+		watchdog->resetval = watchdog->watchdog_resetval;
+
+	if (!watchdog_enabled)
+		arch_watchdog_stop();
+}

kernel/watchdog.h

@@ -13,18 +13,23 @@ extern unsigned watchdog_local_timer_ticks; /* is timer still ticking? */
  * implement it in runtime after the correct arch/model was detected
  */
 
-typedef void (* arch_watchdog_method_t)(int);
+typedef void (* arch_watchdog_method_t)(const unsigned);
+typedef int (* arch_watchdog_profile_init_t)(const unsigned);
 
 struct arch_watchdog {
-	arch_watchdog_method_t	init;	/* initial setup */
-	arch_watchdog_method_t	reinit;	/* reinitialization after a tick */
-	unsigned		resetval;
+	arch_watchdog_method_t		init;	/* initial setup */
+	arch_watchdog_method_t		reinit;	/* reinit after a tick */
+	arch_watchdog_profile_init_t	profile_init;
+	unsigned			resetval;
+	unsigned			watchdog_resetval;
+	unsigned			profile_resetval;
 };
 
 extern struct arch_watchdog *watchdog;
 
-/* let the arch code do whatever it needs to setup the watchdog */
+/* let the arch code do whatever it needs to setup or quit the watchdog */
 int arch_watchdog_init(void);
+void arch_watchdog_stop(void);
 /* if the watchdog detects lockup, let the arch code to handle it */
 void arch_watchdog_lockup(const struct nmi_frame * frame);
 
@@ -33,4 +38,10 @@ void arch_watchdog_lockup(const struct nmi_frame * frame);
  * arch specific code of the watchdog implementaion */
 void nmi_watchdog_handler(struct nmi_frame * frame);
 
+/*
+ * start and stop profiling using the NMI watchdog
+ */
+int nmi_watchdog_start_profiling(const unsigned freq);
+void nmi_watchdog_stop_profiling(void);
+
 #endif /* __WATCHDOG_H__ */