9bc132e473
The actual statistical values are being updated for only two tests belonging to sparc architecture and inorder cpu: 00.hello and 02.insttest. For others the patch updates config.ini and name changes to statistical variables.
1406 lines
158 KiB
Text
1406 lines
158 KiB
Text
|
|
---------- Begin Simulation Statistics ----------
|
|
sim_seconds 0.200409 # Number of seconds simulated
|
|
sim_ticks 200409284500 # Number of ticks simulated
|
|
final_tick 4321205328500 # Number of ticks from beginning of simulation (restored from checkpoints and never reset)
|
|
sim_freq 1000000000000 # Frequency of simulated ticks
|
|
host_inst_rate 13697441 # Simulator instruction rate (inst/s)
|
|
host_op_rate 13697433 # Simulator op (including micro ops) rate (op/s)
|
|
host_tick_rate 5245128514 # Simulator tick rate (ticks/s)
|
|
host_mem_usage 514692 # Number of bytes of host memory used
|
|
host_seconds 38.21 # Real time elapsed on the host
|
|
sim_insts 523360203 # Number of instructions simulated
|
|
sim_ops 523360203 # Number of ops (including micro ops) simulated
|
|
testsys.physmem.bytes_read::cpu.inst 80888044 # Number of bytes read from this memory
|
|
testsys.physmem.bytes_read::cpu.data 27771396 # Number of bytes read from this memory
|
|
testsys.physmem.bytes_read::tsunami.ethernet 50103096 # Number of bytes read from this memory
|
|
testsys.physmem.bytes_read::total 158762536 # Number of bytes read from this memory
|
|
testsys.physmem.bytes_inst_read::cpu.inst 80888044 # Number of instructions bytes read from this memory
|
|
testsys.physmem.bytes_inst_read::total 80888044 # Number of instructions bytes read from this memory
|
|
testsys.physmem.bytes_written::cpu.data 16575224 # Number of bytes written to this memory
|
|
testsys.physmem.bytes_written::tsunami.ethernet 902 # Number of bytes written to this memory
|
|
testsys.physmem.bytes_written::total 16576126 # Number of bytes written to this memory
|
|
testsys.physmem.num_reads::cpu.inst 20222011 # Number of read requests responded to by this memory
|
|
testsys.physmem.num_reads::cpu.data 3834989 # Number of read requests responded to by this memory
|
|
testsys.physmem.num_reads::tsunami.ethernet 2087611 # Number of read requests responded to by this memory
|
|
testsys.physmem.num_reads::total 26144611 # Number of read requests responded to by this memory
|
|
testsys.physmem.num_writes::cpu.data 2254078 # Number of write requests responded to by this memory
|
|
testsys.physmem.num_writes::tsunami.ethernet 31 # Number of write requests responded to by this memory
|
|
testsys.physmem.num_writes::total 2254109 # Number of write requests responded to by this memory
|
|
testsys.physmem.bw_read::cpu.inst 403614255 # Total read bandwidth from this memory (bytes/s)
|
|
testsys.physmem.bw_read::cpu.data 138573400 # Total read bandwidth from this memory (bytes/s)
|
|
testsys.physmem.bw_read::tsunami.ethernet 250003866 # Total read bandwidth from this memory (bytes/s)
|
|
testsys.physmem.bw_read::total 792191521 # Total read bandwidth from this memory (bytes/s)
|
|
testsys.physmem.bw_inst_read::cpu.inst 403614255 # Instruction read bandwidth from this memory (bytes/s)
|
|
testsys.physmem.bw_inst_read::total 403614255 # Instruction read bandwidth from this memory (bytes/s)
|
|
testsys.physmem.bw_write::cpu.data 82706867 # Write bandwidth from this memory (bytes/s)
|
|
testsys.physmem.bw_write::tsunami.ethernet 4501 # Write bandwidth from this memory (bytes/s)
|
|
testsys.physmem.bw_write::total 82711368 # Write bandwidth from this memory (bytes/s)
|
|
testsys.physmem.bw_total::cpu.inst 403614255 # Total bandwidth to/from this memory (bytes/s)
|
|
testsys.physmem.bw_total::cpu.data 221280267 # Total bandwidth to/from this memory (bytes/s)
|
|
testsys.physmem.bw_total::tsunami.ethernet 250008367 # Total bandwidth to/from this memory (bytes/s)
|
|
testsys.physmem.bw_total::total 874902889 # Total bandwidth to/from this memory (bytes/s)
|
|
testsys.physmem.readReqs 0 # Total number of read requests seen
|
|
testsys.physmem.writeReqs 0 # Total number of write requests seen
|
|
testsys.physmem.cpureqs 0 # Reqs generatd by CPU via cache - shady
|
|
testsys.physmem.bytesRead 0 # Total number of bytes read from memory
|
|
testsys.physmem.bytesWritten 0 # Total number of bytes written to memory
|
|
testsys.physmem.bytesConsumedRd 0 # bytesRead derated as per pkt->getSize()
|
|
testsys.physmem.bytesConsumedWr 0 # bytesWritten derated as per pkt->getSize()
|
|
testsys.physmem.servicedByWrQ 0 # Number of read reqs serviced by write Q
|
|
testsys.physmem.neitherReadNorWrite 0 # Reqs where no action is needed
|
|
testsys.physmem.perBankRdReqs::0 0 # Track reads on a per bank basis
|
|
testsys.physmem.perBankRdReqs::1 0 # Track reads on a per bank basis
|
|
testsys.physmem.perBankRdReqs::2 0 # Track reads on a per bank basis
|
|
testsys.physmem.perBankRdReqs::3 0 # Track reads on a per bank basis
|
|
testsys.physmem.perBankRdReqs::4 0 # Track reads on a per bank basis
|
|
testsys.physmem.perBankRdReqs::5 0 # Track reads on a per bank basis
|
|
testsys.physmem.perBankRdReqs::6 0 # Track reads on a per bank basis
|
|
testsys.physmem.perBankRdReqs::7 0 # Track reads on a per bank basis
|
|
testsys.physmem.perBankRdReqs::8 0 # Track reads on a per bank basis
|
|
testsys.physmem.perBankRdReqs::9 0 # Track reads on a per bank basis
|
|
testsys.physmem.perBankRdReqs::10 0 # Track reads on a per bank basis
|
|
testsys.physmem.perBankRdReqs::11 0 # Track reads on a per bank basis
|
|
testsys.physmem.perBankRdReqs::12 0 # Track reads on a per bank basis
|
|
testsys.physmem.perBankRdReqs::13 0 # Track reads on a per bank basis
|
|
testsys.physmem.perBankRdReqs::14 0 # Track reads on a per bank basis
|
|
testsys.physmem.perBankRdReqs::15 0 # Track reads on a per bank basis
|
|
testsys.physmem.perBankWrReqs::0 0 # Track writes on a per bank basis
|
|
testsys.physmem.perBankWrReqs::1 0 # Track writes on a per bank basis
|
|
testsys.physmem.perBankWrReqs::2 0 # Track writes on a per bank basis
|
|
testsys.physmem.perBankWrReqs::3 0 # Track writes on a per bank basis
|
|
testsys.physmem.perBankWrReqs::4 0 # Track writes on a per bank basis
|
|
testsys.physmem.perBankWrReqs::5 0 # Track writes on a per bank basis
|
|
testsys.physmem.perBankWrReqs::6 0 # Track writes on a per bank basis
|
|
testsys.physmem.perBankWrReqs::7 0 # Track writes on a per bank basis
|
|
testsys.physmem.perBankWrReqs::8 0 # Track writes on a per bank basis
|
|
testsys.physmem.perBankWrReqs::9 0 # Track writes on a per bank basis
|
|
testsys.physmem.perBankWrReqs::10 0 # Track writes on a per bank basis
|
|
testsys.physmem.perBankWrReqs::11 0 # Track writes on a per bank basis
|
|
testsys.physmem.perBankWrReqs::12 0 # Track writes on a per bank basis
|
|
testsys.physmem.perBankWrReqs::13 0 # Track writes on a per bank basis
|
|
testsys.physmem.perBankWrReqs::14 0 # Track writes on a per bank basis
|
|
testsys.physmem.perBankWrReqs::15 0 # Track writes on a per bank basis
|
|
testsys.physmem.numRdRetry 0 # Number of times rd buffer was full causing retry
|
|
testsys.physmem.numWrRetry 0 # Number of times wr buffer was full causing retry
|
|
testsys.physmem.totGap 0 # Total gap between requests
|
|
testsys.physmem.readPktSize::0 0 # Categorize read packet sizes
|
|
testsys.physmem.readPktSize::1 0 # Categorize read packet sizes
|
|
testsys.physmem.readPktSize::2 0 # Categorize read packet sizes
|
|
testsys.physmem.readPktSize::3 0 # Categorize read packet sizes
|
|
testsys.physmem.readPktSize::4 0 # Categorize read packet sizes
|
|
testsys.physmem.readPktSize::5 0 # Categorize read packet sizes
|
|
testsys.physmem.readPktSize::6 0 # Categorize read packet sizes
|
|
testsys.physmem.readPktSize::7 0 # Categorize read packet sizes
|
|
testsys.physmem.readPktSize::8 0 # Categorize read packet sizes
|
|
testsys.physmem.writePktSize::0 0 # categorize write packet sizes
|
|
testsys.physmem.writePktSize::1 0 # categorize write packet sizes
|
|
testsys.physmem.writePktSize::2 0 # categorize write packet sizes
|
|
testsys.physmem.writePktSize::3 0 # categorize write packet sizes
|
|
testsys.physmem.writePktSize::4 0 # categorize write packet sizes
|
|
testsys.physmem.writePktSize::5 0 # categorize write packet sizes
|
|
testsys.physmem.writePktSize::6 0 # categorize write packet sizes
|
|
testsys.physmem.writePktSize::7 0 # categorize write packet sizes
|
|
testsys.physmem.writePktSize::8 0 # categorize write packet sizes
|
|
testsys.physmem.neitherpktsize::0 0 # categorize neither packet sizes
|
|
testsys.physmem.neitherpktsize::1 0 # categorize neither packet sizes
|
|
testsys.physmem.neitherpktsize::2 0 # categorize neither packet sizes
|
|
testsys.physmem.neitherpktsize::3 0 # categorize neither packet sizes
|
|
testsys.physmem.neitherpktsize::4 0 # categorize neither packet sizes
|
|
testsys.physmem.neitherpktsize::5 0 # categorize neither packet sizes
|
|
testsys.physmem.neitherpktsize::6 0 # categorize neither packet sizes
|
|
testsys.physmem.neitherpktsize::7 0 # categorize neither packet sizes
|
|
testsys.physmem.neitherpktsize::8 0 # categorize neither packet sizes
|
|
testsys.physmem.rdQLenPdf::0 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::1 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::2 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::3 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::4 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::5 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::6 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::7 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::8 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::9 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::10 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::11 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::12 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::13 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::14 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::15 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::16 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::17 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::18 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::19 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::20 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::21 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::22 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::23 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::24 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::25 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::26 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::27 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::28 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::29 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::30 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::31 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::32 0 # What read queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::0 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::1 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::2 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::3 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::4 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::5 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::6 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::7 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::8 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::9 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::10 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::11 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::12 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::13 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::14 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::15 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::16 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::17 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::18 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::19 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::20 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::21 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::22 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::23 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::24 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::25 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::26 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::27 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::28 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::29 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::30 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::31 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::32 0 # What write queue length does an incoming req see
|
|
testsys.physmem.totQLat 0 # Total cycles spent in queuing delays
|
|
testsys.physmem.totMemAccLat 0 # Sum of mem lat for all requests
|
|
testsys.physmem.totBusLat 0 # Total cycles spent in databus access
|
|
testsys.physmem.totBankLat 0 # Total cycles spent in bank access
|
|
testsys.physmem.avgQLat nan # Average queueing delay per request
|
|
testsys.physmem.avgBankLat nan # Average bank access latency per request
|
|
testsys.physmem.avgBusLat nan # Average bus latency per request
|
|
testsys.physmem.avgMemAccLat nan # Average memory access latency
|
|
testsys.physmem.avgRdBW 0.00 # Average achieved read bandwidth in MB/s
|
|
testsys.physmem.avgWrBW 0.00 # Average achieved write bandwidth in MB/s
|
|
testsys.physmem.avgConsumedRdBW 0.00 # Average consumed read bandwidth in MB/s
|
|
testsys.physmem.avgConsumedWrBW 0.00 # Average consumed write bandwidth in MB/s
|
|
testsys.physmem.peakBW 16000.00 # Theoretical peak bandwidth in MB/s
|
|
testsys.physmem.busUtil 0.00 # Data bus utilization in percentage
|
|
testsys.physmem.avgRdQLen 0.00 # Average read queue length over time
|
|
testsys.physmem.avgWrQLen 0.00 # Average write queue length over time
|
|
testsys.physmem.readRowHits 0 # Number of row buffer hits during reads
|
|
testsys.physmem.writeRowHits 0 # Number of row buffer hits during writes
|
|
testsys.physmem.readRowHitRate nan # Row buffer hit rate for reads
|
|
testsys.physmem.writeRowHitRate nan # Row buffer hit rate for writes
|
|
testsys.physmem.avgGap nan # Average gap between requests
|
|
testsys.disk0.dma_read_full_pages 0 # Number of full page size DMA reads (not PRD).
|
|
testsys.disk0.dma_read_bytes 0 # Number of bytes transfered via DMA reads (not PRD).
|
|
testsys.disk0.dma_read_txs 0 # Number of DMA read transactions (not PRD).
|
|
testsys.disk0.dma_write_full_pages 0 # Number of full page size DMA writes.
|
|
testsys.disk0.dma_write_bytes 0 # Number of bytes transfered via DMA writes.
|
|
testsys.disk0.dma_write_txs 0 # Number of DMA write transactions.
|
|
testsys.disk2.dma_read_full_pages 0 # Number of full page size DMA reads (not PRD).
|
|
testsys.disk2.dma_read_bytes 0 # Number of bytes transfered via DMA reads (not PRD).
|
|
testsys.disk2.dma_read_txs 0 # Number of DMA read transactions (not PRD).
|
|
testsys.disk2.dma_write_full_pages 0 # Number of full page size DMA writes.
|
|
testsys.disk2.dma_write_bytes 0 # Number of bytes transfered via DMA writes.
|
|
testsys.disk2.dma_write_txs 0 # Number of DMA write transactions.
|
|
testsys.cpu.dtb.fetch_hits 0 # ITB hits
|
|
testsys.cpu.dtb.fetch_misses 0 # ITB misses
|
|
testsys.cpu.dtb.fetch_acv 0 # ITB acv
|
|
testsys.cpu.dtb.fetch_accesses 0 # ITB accesses
|
|
testsys.cpu.dtb.read_hits 3909164 # DTB read hits
|
|
testsys.cpu.dtb.read_misses 3287 # DTB read misses
|
|
testsys.cpu.dtb.read_acv 80 # DTB read access violations
|
|
testsys.cpu.dtb.read_accesses 225414 # DTB read accesses
|
|
testsys.cpu.dtb.write_hits 2312434 # DTB write hits
|
|
testsys.cpu.dtb.write_misses 528 # DTB write misses
|
|
testsys.cpu.dtb.write_acv 81 # DTB write access violations
|
|
testsys.cpu.dtb.write_accesses 109988 # DTB write accesses
|
|
testsys.cpu.dtb.data_hits 6221598 # DTB hits
|
|
testsys.cpu.dtb.data_misses 3815 # DTB misses
|
|
testsys.cpu.dtb.data_acv 161 # DTB access violations
|
|
testsys.cpu.dtb.data_accesses 335402 # DTB accesses
|
|
testsys.cpu.itb.fetch_hits 4045775 # ITB hits
|
|
testsys.cpu.itb.fetch_misses 1497 # ITB misses
|
|
testsys.cpu.itb.fetch_acv 69 # ITB acv
|
|
testsys.cpu.itb.fetch_accesses 4047272 # ITB accesses
|
|
testsys.cpu.itb.read_hits 0 # DTB read hits
|
|
testsys.cpu.itb.read_misses 0 # DTB read misses
|
|
testsys.cpu.itb.read_acv 0 # DTB read access violations
|
|
testsys.cpu.itb.read_accesses 0 # DTB read accesses
|
|
testsys.cpu.itb.write_hits 0 # DTB write hits
|
|
testsys.cpu.itb.write_misses 0 # DTB write misses
|
|
testsys.cpu.itb.write_acv 0 # DTB write access violations
|
|
testsys.cpu.itb.write_accesses 0 # DTB write accesses
|
|
testsys.cpu.itb.data_hits 0 # DTB hits
|
|
testsys.cpu.itb.data_misses 0 # DTB misses
|
|
testsys.cpu.itb.data_acv 0 # DTB access violations
|
|
testsys.cpu.itb.data_accesses 0 # DTB accesses
|
|
testsys.cpu.numCycles 400807419 # number of cpu cycles simulated
|
|
testsys.cpu.numWorkItemsStarted 0 # number of work items this cpu started
|
|
testsys.cpu.numWorkItemsCompleted 0 # number of work items this cpu completed
|
|
testsys.cpu.committedInsts 20218035 # Number of instructions committed
|
|
testsys.cpu.committedOps 20218035 # Number of ops (including micro ops) committed
|
|
testsys.cpu.num_int_alu_accesses 18800192 # Number of integer alu accesses
|
|
testsys.cpu.num_fp_alu_accesses 17380 # Number of float alu accesses
|
|
testsys.cpu.num_func_calls 1218514 # number of times a function call or return occured
|
|
testsys.cpu.num_conditional_control_insts 1439639 # number of instructions that are conditional controls
|
|
testsys.cpu.num_int_insts 18800192 # number of integer instructions
|
|
testsys.cpu.num_fp_insts 17380 # number of float instructions
|
|
testsys.cpu.num_int_register_reads 24739164 # number of times the integer registers were read
|
|
testsys.cpu.num_int_register_writes 14664877 # number of times the integer registers were written
|
|
testsys.cpu.num_fp_register_reads 11166 # number of times the floating registers were read
|
|
testsys.cpu.num_fp_register_writes 10823 # number of times the floating registers were written
|
|
testsys.cpu.num_mem_refs 6250795 # number of memory refs
|
|
testsys.cpu.num_load_insts 3936233 # Number of load instructions
|
|
testsys.cpu.num_store_insts 2314562 # Number of store instructions
|
|
testsys.cpu.num_idle_cycles 380584404.581032 # Number of idle cycles
|
|
testsys.cpu.num_busy_cycles 20223014.418968 # Number of busy cycles
|
|
testsys.cpu.not_idle_fraction 0.050456 # Percentage of non-idle cycles
|
|
testsys.cpu.idle_fraction 0.949544 # Percentage of idle cycles
|
|
testsys.cpu.kern.inst.arm 0 # number of arm instructions executed
|
|
testsys.cpu.kern.inst.quiesce 19525 # number of quiesce instructions executed
|
|
testsys.cpu.kern.inst.hwrei 153371 # number of hwrei instructions executed
|
|
testsys.cpu.kern.ipl_count::0 62656 42.67% 42.67% # number of times we switched to this ipl
|
|
testsys.cpu.kern.ipl_count::21 19578 13.33% 56.01% # number of times we switched to this ipl
|
|
testsys.cpu.kern.ipl_count::22 205 0.14% 56.15% # number of times we switched to this ipl
|
|
testsys.cpu.kern.ipl_count::31 64383 43.85% 100.00% # number of times we switched to this ipl
|
|
testsys.cpu.kern.ipl_count::total 146822 # number of times we switched to this ipl
|
|
testsys.cpu.kern.ipl_good::0 62650 43.18% 43.18% # number of times we switched to this ipl from a different ipl
|
|
testsys.cpu.kern.ipl_good::21 19578 13.49% 56.67% # number of times we switched to this ipl from a different ipl
|
|
testsys.cpu.kern.ipl_good::22 205 0.14% 56.81% # number of times we switched to this ipl from a different ipl
|
|
testsys.cpu.kern.ipl_good::31 62661 43.19% 100.00% # number of times we switched to this ipl from a different ipl
|
|
testsys.cpu.kern.ipl_good::total 145094 # number of times we switched to this ipl from a different ipl
|
|
testsys.cpu.kern.ipl_ticks::0 194361437500 96.98% 96.98% # number of cycles we spent at this ipl
|
|
testsys.cpu.kern.ipl_ticks::21 1585244500 0.79% 97.78% # number of cycles we spent at this ipl
|
|
testsys.cpu.kern.ipl_ticks::22 8815000 0.00% 97.78% # number of cycles we spent at this ipl
|
|
testsys.cpu.kern.ipl_ticks::31 4448431000 2.22% 100.00% # number of cycles we spent at this ipl
|
|
testsys.cpu.kern.ipl_ticks::total 200403928000 # number of cycles we spent at this ipl
|
|
testsys.cpu.kern.ipl_used::0 0.999904 # fraction of swpipl calls that actually changed the ipl
|
|
testsys.cpu.kern.ipl_used::21 1 # fraction of swpipl calls that actually changed the ipl
|
|
testsys.cpu.kern.ipl_used::22 1 # fraction of swpipl calls that actually changed the ipl
|
|
testsys.cpu.kern.ipl_used::31 0.973254 # fraction of swpipl calls that actually changed the ipl
|
|
testsys.cpu.kern.ipl_used::total 0.988231 # fraction of swpipl calls that actually changed the ipl
|
|
testsys.cpu.kern.syscall::2 3 3.61% 3.61% # number of syscalls executed
|
|
testsys.cpu.kern.syscall::3 7 8.43% 12.05% # number of syscalls executed
|
|
testsys.cpu.kern.syscall::4 1 1.20% 13.25% # number of syscalls executed
|
|
testsys.cpu.kern.syscall::6 7 8.43% 21.69% # number of syscalls executed
|
|
testsys.cpu.kern.syscall::17 7 8.43% 30.12% # number of syscalls executed
|
|
testsys.cpu.kern.syscall::19 2 2.41% 32.53% # number of syscalls executed
|
|
testsys.cpu.kern.syscall::20 1 1.20% 33.73% # number of syscalls executed
|
|
testsys.cpu.kern.syscall::33 3 3.61% 37.35% # number of syscalls executed
|
|
testsys.cpu.kern.syscall::45 10 12.05% 49.40% # number of syscalls executed
|
|
testsys.cpu.kern.syscall::48 5 6.02% 55.42% # number of syscalls executed
|
|
testsys.cpu.kern.syscall::54 1 1.20% 56.63% # number of syscalls executed
|
|
testsys.cpu.kern.syscall::59 3 3.61% 60.24% # number of syscalls executed
|
|
testsys.cpu.kern.syscall::71 15 18.07% 78.31% # number of syscalls executed
|
|
testsys.cpu.kern.syscall::74 4 4.82% 83.13% # number of syscalls executed
|
|
testsys.cpu.kern.syscall::97 2 2.41% 85.54% # number of syscalls executed
|
|
testsys.cpu.kern.syscall::98 2 2.41% 87.95% # number of syscalls executed
|
|
testsys.cpu.kern.syscall::101 2 2.41% 90.36% # number of syscalls executed
|
|
testsys.cpu.kern.syscall::102 2 2.41% 92.77% # number of syscalls executed
|
|
testsys.cpu.kern.syscall::104 1 1.20% 93.98% # number of syscalls executed
|
|
testsys.cpu.kern.syscall::105 3 3.61% 97.59% # number of syscalls executed
|
|
testsys.cpu.kern.syscall::118 2 2.41% 100.00% # number of syscalls executed
|
|
testsys.cpu.kern.syscall::total 83 # number of syscalls executed
|
|
testsys.cpu.kern.callpal::swpctx 438 0.34% 0.34% # number of callpals executed
|
|
testsys.cpu.kern.callpal::tbi 20 0.02% 0.36% # number of callpals executed
|
|
testsys.cpu.kern.callpal::swpipl 106626 83.26% 83.62% # number of callpals executed
|
|
testsys.cpu.kern.callpal::rdps 359 0.28% 83.90% # number of callpals executed
|
|
testsys.cpu.kern.callpal::wrusp 3 0.00% 83.90% # number of callpals executed
|
|
testsys.cpu.kern.callpal::rdusp 3 0.00% 83.91% # number of callpals executed
|
|
testsys.cpu.kern.callpal::rti 20424 15.95% 99.86% # number of callpals executed
|
|
testsys.cpu.kern.callpal::callsys 140 0.11% 99.97% # number of callpals executed
|
|
testsys.cpu.kern.callpal::imb 44 0.03% 100.00% # number of callpals executed
|
|
testsys.cpu.kern.callpal::total 128057 # number of callpals executed
|
|
testsys.cpu.kern.mode_switch::kernel 1279 # number of protection mode switches
|
|
testsys.cpu.kern.mode_switch::user 702 # number of protection mode switches
|
|
testsys.cpu.kern.mode_switch::idle 19584 # number of protection mode switches
|
|
testsys.cpu.kern.mode_good::kernel 707
|
|
testsys.cpu.kern.mode_good::user 702
|
|
testsys.cpu.kern.mode_good::idle 5
|
|
testsys.cpu.kern.mode_switch_good::kernel 0.552776 # fraction of useful protection mode switches
|
|
testsys.cpu.kern.mode_switch_good::user 1 # fraction of useful protection mode switches
|
|
testsys.cpu.kern.mode_switch_good::idle 0.000255 # fraction of useful protection mode switches
|
|
testsys.cpu.kern.mode_switch_good::total 0.065569 # fraction of useful protection mode switches
|
|
testsys.cpu.kern.mode_ticks::kernel 993857000 59.77% 59.77% # number of ticks spent at the given mode
|
|
testsys.cpu.kern.mode_ticks::user 533068000 32.06% 91.82% # number of ticks spent at the given mode
|
|
testsys.cpu.kern.mode_ticks::idle 135946500 8.18% 100.00% # number of ticks spent at the given mode
|
|
testsys.cpu.kern.swap_context 438 # number of times the context was actually changed
|
|
testsys.tsunami.ethernet.txBytes 960 # Bytes Transmitted
|
|
testsys.tsunami.ethernet.rxBytes 798 # Bytes Received
|
|
testsys.tsunami.ethernet.txPackets 8 # Number of Packets Transmitted
|
|
testsys.tsunami.ethernet.rxPackets 5 # Number of Packets Received
|
|
testsys.tsunami.ethernet.txIpChecksums 2 # Number of tx IP Checksums done by device
|
|
testsys.tsunami.ethernet.rxIpChecksums 5 # Number of rx IP Checksums done by device
|
|
testsys.tsunami.ethernet.txTcpChecksums 2 # Number of tx TCP Checksums done by device
|
|
testsys.tsunami.ethernet.rxTcpChecksums 5 # Number of rx TCP Checksums done by device
|
|
testsys.tsunami.ethernet.txUdpChecksums 0 # Number of tx UDP Checksums done by device
|
|
testsys.tsunami.ethernet.rxUdpChecksums 0 # Number of rx UDP Checksums done by device
|
|
testsys.tsunami.ethernet.descDMAReads 2087576 # Number of descriptors the device read w/ DMA
|
|
testsys.tsunami.ethernet.descDMAWrites 13 # Number of descriptors the device wrote w/ DMA
|
|
testsys.tsunami.ethernet.descDmaReadBytes 50101824 # number of descriptor bytes read w/ DMA
|
|
testsys.tsunami.ethernet.descDmaWriteBytes 104 # number of descriptor bytes write w/ DMA
|
|
testsys.tsunami.ethernet.totBandwidth 70176 # Total Bandwidth (bits/s)
|
|
testsys.tsunami.ethernet.totPackets 13 # Total Packets
|
|
testsys.tsunami.ethernet.totBytes 1758 # Total Bytes
|
|
testsys.tsunami.ethernet.totPPS 65 # Total Tranmission Rate (packets/s)
|
|
testsys.tsunami.ethernet.txBandwidth 38322 # Transmit Bandwidth (bits/s)
|
|
testsys.tsunami.ethernet.rxBandwidth 31855 # Receive Bandwidth (bits/s)
|
|
testsys.tsunami.ethernet.txPPS 40 # Packet Tranmission Rate (packets/s)
|
|
testsys.tsunami.ethernet.rxPPS 25 # Packet Reception Rate (packets/s)
|
|
testsys.tsunami.ethernet.postedSwi 0 # number of software interrupts posted to CPU
|
|
testsys.tsunami.ethernet.coalescedSwi 0 # average number of Swi's coalesced into each post
|
|
testsys.tsunami.ethernet.totalSwi 0 # total number of Swi written to ISR
|
|
testsys.tsunami.ethernet.postedRxIdle 0 # number of rxIdle interrupts posted to CPU
|
|
testsys.tsunami.ethernet.coalescedRxIdle 0 # average number of RxIdle's coalesced into each post
|
|
testsys.tsunami.ethernet.totalRxIdle 0 # total number of RxIdle written to ISR
|
|
testsys.tsunami.ethernet.postedRxOk 0 # number of RxOk interrupts posted to CPU
|
|
testsys.tsunami.ethernet.coalescedRxOk 0 # average number of RxOk's coalesced into each post
|
|
testsys.tsunami.ethernet.totalRxOk 0 # total number of RxOk written to ISR
|
|
testsys.tsunami.ethernet.postedRxDesc 5 # number of RxDesc interrupts posted to CPU
|
|
testsys.tsunami.ethernet.coalescedRxDesc 0 # average number of RxDesc's coalesced into each post
|
|
testsys.tsunami.ethernet.totalRxDesc 5 # total number of RxDesc written to ISR
|
|
testsys.tsunami.ethernet.postedTxOk 0 # number of TxOk interrupts posted to CPU
|
|
testsys.tsunami.ethernet.coalescedTxOk 0 # average number of TxOk's coalesced into each post
|
|
testsys.tsunami.ethernet.totalTxOk 0 # total number of TxOk written to ISR
|
|
testsys.tsunami.ethernet.postedTxIdle 19525 # number of TxIdle interrupts posted to CPU
|
|
testsys.tsunami.ethernet.coalescedTxIdle 1 # average number of TxIdle's coalesced into each post
|
|
testsys.tsunami.ethernet.totalTxIdle 2087576 # total number of TxIdle written to ISR
|
|
testsys.tsunami.ethernet.postedTxDesc 0 # number of TxDesc interrupts posted to CPU
|
|
testsys.tsunami.ethernet.coalescedTxDesc 0 # average number of TxDesc's coalesced into each post
|
|
testsys.tsunami.ethernet.totalTxDesc 0 # total number of TxDesc written to ISR
|
|
testsys.tsunami.ethernet.postedRxOrn 0 # number of RxOrn posted to CPU
|
|
testsys.tsunami.ethernet.coalescedRxOrn 0 # average number of RxOrn's coalesced into each post
|
|
testsys.tsunami.ethernet.totalRxOrn 0 # total number of RxOrn written to ISR
|
|
testsys.tsunami.ethernet.coalescedTotal 1 # average number of interrupts coalesced into each post
|
|
testsys.tsunami.ethernet.postedInterrupts 2087594 # number of posts to CPU
|
|
testsys.tsunami.ethernet.droppedPackets 0 # number of packets dropped
|
|
drivesys.physmem.bytes_read::cpu.inst 76121948 # Number of bytes read from this memory
|
|
drivesys.physmem.bytes_read::cpu.data 26255588 # Number of bytes read from this memory
|
|
drivesys.physmem.bytes_read::tsunami.ethernet 50103126 # Number of bytes read from this memory
|
|
drivesys.physmem.bytes_read::total 152480662 # Number of bytes read from this memory
|
|
drivesys.physmem.bytes_inst_read::cpu.inst 76121948 # Number of instructions bytes read from this memory
|
|
drivesys.physmem.bytes_inst_read::total 76121948 # Number of instructions bytes read from this memory
|
|
drivesys.physmem.bytes_written::cpu.data 14603776 # Number of bytes written to this memory
|
|
drivesys.physmem.bytes_written::tsunami.ethernet 1064 # Number of bytes written to this memory
|
|
drivesys.physmem.bytes_written::total 14604840 # Number of bytes written to this memory
|
|
drivesys.physmem.num_reads::cpu.inst 19030487 # Number of read requests responded to by this memory
|
|
drivesys.physmem.num_reads::cpu.data 3643074 # Number of read requests responded to by this memory
|
|
drivesys.physmem.num_reads::tsunami.ethernet 2087613 # Number of read requests responded to by this memory
|
|
drivesys.physmem.num_reads::total 24761174 # Number of read requests responded to by this memory
|
|
drivesys.physmem.num_writes::cpu.data 2022588 # Number of write requests responded to by this memory
|
|
drivesys.physmem.num_writes::tsunami.ethernet 37 # Number of write requests responded to by this memory
|
|
drivesys.physmem.num_writes::total 2022625 # Number of write requests responded to by this memory
|
|
drivesys.physmem.bw_read::cpu.inst 379832442 # Total read bandwidth from this memory (bytes/s)
|
|
drivesys.physmem.bw_read::cpu.data 131009839 # Total read bandwidth from this memory (bytes/s)
|
|
drivesys.physmem.bw_read::tsunami.ethernet 250004016 # Total read bandwidth from this memory (bytes/s)
|
|
drivesys.physmem.bw_read::total 760846297 # Total read bandwidth from this memory (bytes/s)
|
|
drivesys.physmem.bw_inst_read::cpu.inst 379832442 # Instruction read bandwidth from this memory (bytes/s)
|
|
drivesys.physmem.bw_inst_read::total 379832442 # Instruction read bandwidth from this memory (bytes/s)
|
|
drivesys.physmem.bw_write::cpu.data 72869758 # Write bandwidth from this memory (bytes/s)
|
|
drivesys.physmem.bw_write::tsunami.ethernet 5309 # Write bandwidth from this memory (bytes/s)
|
|
drivesys.physmem.bw_write::total 72875067 # Write bandwidth from this memory (bytes/s)
|
|
drivesys.physmem.bw_total::cpu.inst 379832442 # Total bandwidth to/from this memory (bytes/s)
|
|
drivesys.physmem.bw_total::cpu.data 203879596 # Total bandwidth to/from this memory (bytes/s)
|
|
drivesys.physmem.bw_total::tsunami.ethernet 250009325 # Total bandwidth to/from this memory (bytes/s)
|
|
drivesys.physmem.bw_total::total 833721364 # Total bandwidth to/from this memory (bytes/s)
|
|
drivesys.physmem.readReqs 0 # Total number of read requests seen
|
|
drivesys.physmem.writeReqs 0 # Total number of write requests seen
|
|
drivesys.physmem.cpureqs 0 # Reqs generatd by CPU via cache - shady
|
|
drivesys.physmem.bytesRead 0 # Total number of bytes read from memory
|
|
drivesys.physmem.bytesWritten 0 # Total number of bytes written to memory
|
|
drivesys.physmem.bytesConsumedRd 0 # bytesRead derated as per pkt->getSize()
|
|
drivesys.physmem.bytesConsumedWr 0 # bytesWritten derated as per pkt->getSize()
|
|
drivesys.physmem.servicedByWrQ 0 # Number of read reqs serviced by write Q
|
|
drivesys.physmem.neitherReadNorWrite 0 # Reqs where no action is needed
|
|
drivesys.physmem.perBankRdReqs::0 0 # Track reads on a per bank basis
|
|
drivesys.physmem.perBankRdReqs::1 0 # Track reads on a per bank basis
|
|
drivesys.physmem.perBankRdReqs::2 0 # Track reads on a per bank basis
|
|
drivesys.physmem.perBankRdReqs::3 0 # Track reads on a per bank basis
|
|
drivesys.physmem.perBankRdReqs::4 0 # Track reads on a per bank basis
|
|
drivesys.physmem.perBankRdReqs::5 0 # Track reads on a per bank basis
|
|
drivesys.physmem.perBankRdReqs::6 0 # Track reads on a per bank basis
|
|
drivesys.physmem.perBankRdReqs::7 0 # Track reads on a per bank basis
|
|
drivesys.physmem.perBankRdReqs::8 0 # Track reads on a per bank basis
|
|
drivesys.physmem.perBankRdReqs::9 0 # Track reads on a per bank basis
|
|
drivesys.physmem.perBankRdReqs::10 0 # Track reads on a per bank basis
|
|
drivesys.physmem.perBankRdReqs::11 0 # Track reads on a per bank basis
|
|
drivesys.physmem.perBankRdReqs::12 0 # Track reads on a per bank basis
|
|
drivesys.physmem.perBankRdReqs::13 0 # Track reads on a per bank basis
|
|
drivesys.physmem.perBankRdReqs::14 0 # Track reads on a per bank basis
|
|
drivesys.physmem.perBankRdReqs::15 0 # Track reads on a per bank basis
|
|
drivesys.physmem.perBankWrReqs::0 0 # Track writes on a per bank basis
|
|
drivesys.physmem.perBankWrReqs::1 0 # Track writes on a per bank basis
|
|
drivesys.physmem.perBankWrReqs::2 0 # Track writes on a per bank basis
|
|
drivesys.physmem.perBankWrReqs::3 0 # Track writes on a per bank basis
|
|
drivesys.physmem.perBankWrReqs::4 0 # Track writes on a per bank basis
|
|
drivesys.physmem.perBankWrReqs::5 0 # Track writes on a per bank basis
|
|
drivesys.physmem.perBankWrReqs::6 0 # Track writes on a per bank basis
|
|
drivesys.physmem.perBankWrReqs::7 0 # Track writes on a per bank basis
|
|
drivesys.physmem.perBankWrReqs::8 0 # Track writes on a per bank basis
|
|
drivesys.physmem.perBankWrReqs::9 0 # Track writes on a per bank basis
|
|
drivesys.physmem.perBankWrReqs::10 0 # Track writes on a per bank basis
|
|
drivesys.physmem.perBankWrReqs::11 0 # Track writes on a per bank basis
|
|
drivesys.physmem.perBankWrReqs::12 0 # Track writes on a per bank basis
|
|
drivesys.physmem.perBankWrReqs::13 0 # Track writes on a per bank basis
|
|
drivesys.physmem.perBankWrReqs::14 0 # Track writes on a per bank basis
|
|
drivesys.physmem.perBankWrReqs::15 0 # Track writes on a per bank basis
|
|
drivesys.physmem.numRdRetry 0 # Number of times rd buffer was full causing retry
|
|
drivesys.physmem.numWrRetry 0 # Number of times wr buffer was full causing retry
|
|
drivesys.physmem.totGap 0 # Total gap between requests
|
|
drivesys.physmem.readPktSize::0 0 # Categorize read packet sizes
|
|
drivesys.physmem.readPktSize::1 0 # Categorize read packet sizes
|
|
drivesys.physmem.readPktSize::2 0 # Categorize read packet sizes
|
|
drivesys.physmem.readPktSize::3 0 # Categorize read packet sizes
|
|
drivesys.physmem.readPktSize::4 0 # Categorize read packet sizes
|
|
drivesys.physmem.readPktSize::5 0 # Categorize read packet sizes
|
|
drivesys.physmem.readPktSize::6 0 # Categorize read packet sizes
|
|
drivesys.physmem.readPktSize::7 0 # Categorize read packet sizes
|
|
drivesys.physmem.readPktSize::8 0 # Categorize read packet sizes
|
|
drivesys.physmem.writePktSize::0 0 # categorize write packet sizes
|
|
drivesys.physmem.writePktSize::1 0 # categorize write packet sizes
|
|
drivesys.physmem.writePktSize::2 0 # categorize write packet sizes
|
|
drivesys.physmem.writePktSize::3 0 # categorize write packet sizes
|
|
drivesys.physmem.writePktSize::4 0 # categorize write packet sizes
|
|
drivesys.physmem.writePktSize::5 0 # categorize write packet sizes
|
|
drivesys.physmem.writePktSize::6 0 # categorize write packet sizes
|
|
drivesys.physmem.writePktSize::7 0 # categorize write packet sizes
|
|
drivesys.physmem.writePktSize::8 0 # categorize write packet sizes
|
|
drivesys.physmem.neitherpktsize::0 0 # categorize neither packet sizes
|
|
drivesys.physmem.neitherpktsize::1 0 # categorize neither packet sizes
|
|
drivesys.physmem.neitherpktsize::2 0 # categorize neither packet sizes
|
|
drivesys.physmem.neitherpktsize::3 0 # categorize neither packet sizes
|
|
drivesys.physmem.neitherpktsize::4 0 # categorize neither packet sizes
|
|
drivesys.physmem.neitherpktsize::5 0 # categorize neither packet sizes
|
|
drivesys.physmem.neitherpktsize::6 0 # categorize neither packet sizes
|
|
drivesys.physmem.neitherpktsize::7 0 # categorize neither packet sizes
|
|
drivesys.physmem.neitherpktsize::8 0 # categorize neither packet sizes
|
|
drivesys.physmem.rdQLenPdf::0 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::1 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::2 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::3 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::4 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::5 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::6 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::7 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::8 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::9 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::10 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::11 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::12 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::13 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::14 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::15 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::16 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::17 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::18 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::19 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::20 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::21 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::22 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::23 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::24 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::25 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::26 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::27 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::28 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::29 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::30 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::31 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::32 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::0 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::1 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::2 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::3 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::4 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::5 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::6 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::7 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::8 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::9 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::10 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::11 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::12 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::13 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::14 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::15 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::16 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::17 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::18 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::19 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::20 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::21 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::22 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::23 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::24 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::25 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::26 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::27 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::28 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::29 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::30 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::31 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::32 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.totQLat 0 # Total cycles spent in queuing delays
|
|
drivesys.physmem.totMemAccLat 0 # Sum of mem lat for all requests
|
|
drivesys.physmem.totBusLat 0 # Total cycles spent in databus access
|
|
drivesys.physmem.totBankLat 0 # Total cycles spent in bank access
|
|
drivesys.physmem.avgQLat nan # Average queueing delay per request
|
|
drivesys.physmem.avgBankLat nan # Average bank access latency per request
|
|
drivesys.physmem.avgBusLat nan # Average bus latency per request
|
|
drivesys.physmem.avgMemAccLat nan # Average memory access latency
|
|
drivesys.physmem.avgRdBW 0.00 # Average achieved read bandwidth in MB/s
|
|
drivesys.physmem.avgWrBW 0.00 # Average achieved write bandwidth in MB/s
|
|
drivesys.physmem.avgConsumedRdBW 0.00 # Average consumed read bandwidth in MB/s
|
|
drivesys.physmem.avgConsumedWrBW 0.00 # Average consumed write bandwidth in MB/s
|
|
drivesys.physmem.peakBW 16000.00 # Theoretical peak bandwidth in MB/s
|
|
drivesys.physmem.busUtil 0.00 # Data bus utilization in percentage
|
|
drivesys.physmem.avgRdQLen 0.00 # Average read queue length over time
|
|
drivesys.physmem.avgWrQLen 0.00 # Average write queue length over time
|
|
drivesys.physmem.readRowHits 0 # Number of row buffer hits during reads
|
|
drivesys.physmem.writeRowHits 0 # Number of row buffer hits during writes
|
|
drivesys.physmem.readRowHitRate nan # Row buffer hit rate for reads
|
|
drivesys.physmem.writeRowHitRate nan # Row buffer hit rate for writes
|
|
drivesys.physmem.avgGap nan # Average gap between requests
|
|
drivesys.disk0.dma_read_full_pages 0 # Number of full page size DMA reads (not PRD).
|
|
drivesys.disk0.dma_read_bytes 0 # Number of bytes transfered via DMA reads (not PRD).
|
|
drivesys.disk0.dma_read_txs 0 # Number of DMA read transactions (not PRD).
|
|
drivesys.disk0.dma_write_full_pages 0 # Number of full page size DMA writes.
|
|
drivesys.disk0.dma_write_bytes 0 # Number of bytes transfered via DMA writes.
|
|
drivesys.disk0.dma_write_txs 0 # Number of DMA write transactions.
|
|
drivesys.disk2.dma_read_full_pages 0 # Number of full page size DMA reads (not PRD).
|
|
drivesys.disk2.dma_read_bytes 0 # Number of bytes transfered via DMA reads (not PRD).
|
|
drivesys.disk2.dma_read_txs 0 # Number of DMA read transactions (not PRD).
|
|
drivesys.disk2.dma_write_full_pages 0 # Number of full page size DMA writes.
|
|
drivesys.disk2.dma_write_bytes 0 # Number of bytes transfered via DMA writes.
|
|
drivesys.disk2.dma_write_txs 0 # Number of DMA write transactions.
|
|
drivesys.cpu.dtb.fetch_hits 0 # ITB hits
|
|
drivesys.cpu.dtb.fetch_misses 0 # ITB misses
|
|
drivesys.cpu.dtb.fetch_acv 0 # ITB acv
|
|
drivesys.cpu.dtb.fetch_accesses 0 # ITB accesses
|
|
drivesys.cpu.dtb.read_hits 3721202 # DTB read hits
|
|
drivesys.cpu.dtb.read_misses 487 # DTB read misses
|
|
drivesys.cpu.dtb.read_acv 30 # DTB read access violations
|
|
drivesys.cpu.dtb.read_accesses 267991 # DTB read accesses
|
|
drivesys.cpu.dtb.write_hits 2081819 # DTB write hits
|
|
drivesys.cpu.dtb.write_misses 82 # DTB write misses
|
|
drivesys.cpu.dtb.write_acv 10 # DTB write access violations
|
|
drivesys.cpu.dtb.write_accesses 133239 # DTB write accesses
|
|
drivesys.cpu.dtb.data_hits 5803021 # DTB hits
|
|
drivesys.cpu.dtb.data_misses 569 # DTB misses
|
|
drivesys.cpu.dtb.data_acv 40 # DTB access violations
|
|
drivesys.cpu.dtb.data_accesses 401230 # DTB accesses
|
|
drivesys.cpu.itb.fetch_hits 4194101 # ITB hits
|
|
drivesys.cpu.itb.fetch_misses 194 # ITB misses
|
|
drivesys.cpu.itb.fetch_acv 22 # ITB acv
|
|
drivesys.cpu.itb.fetch_accesses 4194295 # ITB accesses
|
|
drivesys.cpu.itb.read_hits 0 # DTB read hits
|
|
drivesys.cpu.itb.read_misses 0 # DTB read misses
|
|
drivesys.cpu.itb.read_acv 0 # DTB read access violations
|
|
drivesys.cpu.itb.read_accesses 0 # DTB read accesses
|
|
drivesys.cpu.itb.write_hits 0 # DTB write hits
|
|
drivesys.cpu.itb.write_misses 0 # DTB write misses
|
|
drivesys.cpu.itb.write_acv 0 # DTB write access violations
|
|
drivesys.cpu.itb.write_accesses 0 # DTB write accesses
|
|
drivesys.cpu.itb.data_hits 0 # DTB hits
|
|
drivesys.cpu.itb.data_misses 0 # DTB misses
|
|
drivesys.cpu.itb.data_acv 0 # DTB access violations
|
|
drivesys.cpu.itb.data_accesses 0 # DTB accesses
|
|
drivesys.cpu.numCycles 801639056 # number of cpu cycles simulated
|
|
drivesys.cpu.numWorkItemsStarted 0 # number of work items this cpu started
|
|
drivesys.cpu.numWorkItemsCompleted 0 # number of work items this cpu completed
|
|
drivesys.cpu.committedInsts 19029878 # Number of instructions committed
|
|
drivesys.cpu.committedOps 19029878 # Number of ops (including micro ops) committed
|
|
drivesys.cpu.num_int_alu_accesses 17721251 # Number of integer alu accesses
|
|
drivesys.cpu.num_fp_alu_accesses 1412 # Number of float alu accesses
|
|
drivesys.cpu.num_func_calls 1263632 # number of times a function call or return occured
|
|
drivesys.cpu.num_conditional_control_insts 1263629 # number of instructions that are conditional controls
|
|
drivesys.cpu.num_int_insts 17721251 # number of integer instructions
|
|
drivesys.cpu.num_fp_insts 1412 # number of float instructions
|
|
drivesys.cpu.num_int_register_reads 23047059 # number of times the integer registers were read
|
|
drivesys.cpu.num_int_register_writes 13965767 # number of times the integer registers were written
|
|
drivesys.cpu.num_fp_register_reads 760 # number of times the floating registers were read
|
|
drivesys.cpu.num_fp_register_writes 766 # number of times the floating registers were written
|
|
drivesys.cpu.num_mem_refs 5824433 # number of memory refs
|
|
drivesys.cpu.num_load_insts 3742101 # Number of load instructions
|
|
drivesys.cpu.num_store_insts 2082332 # Number of store instructions
|
|
drivesys.cpu.num_idle_cycles 782608307.467164 # Number of idle cycles
|
|
drivesys.cpu.num_busy_cycles 19030748.532836 # Number of busy cycles
|
|
drivesys.cpu.not_idle_fraction 0.023740 # Percentage of non-idle cycles
|
|
drivesys.cpu.idle_fraction 0.976260 # Percentage of idle cycles
|
|
drivesys.cpu.kern.inst.arm 0 # number of arm instructions executed
|
|
drivesys.cpu.kern.inst.quiesce 19854 # number of quiesce instructions executed
|
|
drivesys.cpu.kern.inst.hwrei 143418 # number of hwrei instructions executed
|
|
drivesys.cpu.kern.ipl_count::0 60285 42.42% 42.42% # number of times we switched to this ipl
|
|
drivesys.cpu.kern.ipl_count::21 19703 13.86% 56.28% # number of times we switched to this ipl
|
|
drivesys.cpu.kern.ipl_count::22 205 0.14% 56.42% # number of times we switched to this ipl
|
|
drivesys.cpu.kern.ipl_count::31 61936 43.58% 100.00% # number of times we switched to this ipl
|
|
drivesys.cpu.kern.ipl_count::total 142129 # number of times we switched to this ipl
|
|
drivesys.cpu.kern.ipl_good::0 60285 42.91% 42.91% # number of times we switched to this ipl from a different ipl
|
|
drivesys.cpu.kern.ipl_good::21 19703 14.03% 56.94% # number of times we switched to this ipl from a different ipl
|
|
drivesys.cpu.kern.ipl_good::22 205 0.15% 57.09% # number of times we switched to this ipl from a different ipl
|
|
drivesys.cpu.kern.ipl_good::31 60286 42.91% 100.00% # number of times we switched to this ipl from a different ipl
|
|
drivesys.cpu.kern.ipl_good::total 140479 # number of times we switched to this ipl from a different ipl
|
|
drivesys.cpu.kern.ipl_ticks::0 197404825250 98.50% 98.50% # number of cycles we spent at this ipl
|
|
drivesys.cpu.kern.ipl_ticks::21 797938750 0.40% 98.90% # number of cycles we spent at this ipl
|
|
drivesys.cpu.kern.ipl_ticks::22 4407500 0.00% 98.90% # number of cycles we spent at this ipl
|
|
drivesys.cpu.kern.ipl_ticks::31 2202592500 1.10% 100.00% # number of cycles we spent at this ipl
|
|
drivesys.cpu.kern.ipl_ticks::total 200409764000 # number of cycles we spent at this ipl
|
|
drivesys.cpu.kern.ipl_used::0 1 # fraction of swpipl calls that actually changed the ipl
|
|
drivesys.cpu.kern.ipl_used::21 1 # fraction of swpipl calls that actually changed the ipl
|
|
drivesys.cpu.kern.ipl_used::22 1 # fraction of swpipl calls that actually changed the ipl
|
|
drivesys.cpu.kern.ipl_used::31 0.973360 # fraction of swpipl calls that actually changed the ipl
|
|
drivesys.cpu.kern.ipl_used::total 0.988391 # fraction of swpipl calls that actually changed the ipl
|
|
drivesys.cpu.kern.syscall::2 1 4.55% 4.55% # number of syscalls executed
|
|
drivesys.cpu.kern.syscall::6 3 13.64% 18.18% # number of syscalls executed
|
|
drivesys.cpu.kern.syscall::17 2 9.09% 27.27% # number of syscalls executed
|
|
drivesys.cpu.kern.syscall::97 1 4.55% 31.82% # number of syscalls executed
|
|
drivesys.cpu.kern.syscall::99 2 9.09% 40.91% # number of syscalls executed
|
|
drivesys.cpu.kern.syscall::101 2 9.09% 50.00% # number of syscalls executed
|
|
drivesys.cpu.kern.syscall::102 3 13.64% 63.64% # number of syscalls executed
|
|
drivesys.cpu.kern.syscall::104 1 4.55% 68.18% # number of syscalls executed
|
|
drivesys.cpu.kern.syscall::105 3 13.64% 81.82% # number of syscalls executed
|
|
drivesys.cpu.kern.syscall::106 1 4.55% 86.36% # number of syscalls executed
|
|
drivesys.cpu.kern.syscall::118 2 9.09% 95.45% # number of syscalls executed
|
|
drivesys.cpu.kern.syscall::150 1 4.55% 100.00% # number of syscalls executed
|
|
drivesys.cpu.kern.syscall::total 22 # number of syscalls executed
|
|
drivesys.cpu.kern.callpal::swpctx 72 0.06% 0.06% # number of callpals executed
|
|
drivesys.cpu.kern.callpal::tbi 5 0.00% 0.06% # number of callpals executed
|
|
drivesys.cpu.kern.callpal::swpipl 102208 83.31% 83.37% # number of callpals executed
|
|
drivesys.cpu.kern.callpal::rdps 354 0.29% 83.66% # number of callpals executed
|
|
drivesys.cpu.kern.callpal::rdusp 1 0.00% 83.66% # number of callpals executed
|
|
drivesys.cpu.kern.callpal::rti 20014 16.31% 99.97% # number of callpals executed
|
|
drivesys.cpu.kern.callpal::callsys 25 0.02% 99.99% # number of callpals executed
|
|
drivesys.cpu.kern.callpal::imb 7 0.01% 100.00% # number of callpals executed
|
|
drivesys.cpu.kern.callpal::total 122686 # number of callpals executed
|
|
drivesys.cpu.kern.mode_switch::kernel 214 # number of protection mode switches
|
|
drivesys.cpu.kern.mode_switch::user 139 # number of protection mode switches
|
|
drivesys.cpu.kern.mode_switch::idle 19872 # number of protection mode switches
|
|
drivesys.cpu.kern.mode_good::kernel 143
|
|
drivesys.cpu.kern.mode_good::user 139
|
|
drivesys.cpu.kern.mode_good::idle 4
|
|
drivesys.cpu.kern.mode_switch_good::kernel 0.668224 # fraction of useful protection mode switches
|
|
drivesys.cpu.kern.mode_switch_good::user 1 # fraction of useful protection mode switches
|
|
drivesys.cpu.kern.mode_switch_good::idle 0.000201 # fraction of useful protection mode switches
|
|
drivesys.cpu.kern.mode_switch_good::total 0.014141 # fraction of useful protection mode switches
|
|
drivesys.cpu.kern.mode_ticks::kernel 78132750 2.64% 2.64% # number of ticks spent at the given mode
|
|
drivesys.cpu.kern.mode_ticks::user 319665750 10.81% 13.45% # number of ticks spent at the given mode
|
|
drivesys.cpu.kern.mode_ticks::idle 2560362000 86.55% 100.00% # number of ticks spent at the given mode
|
|
drivesys.cpu.kern.swap_context 72 # number of times the context was actually changed
|
|
drivesys.tsunami.ethernet.txBytes 798 # Bytes Transmitted
|
|
drivesys.tsunami.ethernet.rxBytes 960 # Bytes Received
|
|
drivesys.tsunami.ethernet.txPackets 5 # Number of Packets Transmitted
|
|
drivesys.tsunami.ethernet.rxPackets 8 # Number of Packets Received
|
|
drivesys.tsunami.ethernet.txIpChecksums 2 # Number of tx IP Checksums done by device
|
|
drivesys.tsunami.ethernet.rxIpChecksums 8 # Number of rx IP Checksums done by device
|
|
drivesys.tsunami.ethernet.txTcpChecksums 2 # Number of tx TCP Checksums done by device
|
|
drivesys.tsunami.ethernet.rxTcpChecksums 8 # Number of rx TCP Checksums done by device
|
|
drivesys.tsunami.ethernet.txUdpChecksums 0 # Number of tx UDP Checksums done by device
|
|
drivesys.tsunami.ethernet.rxUdpChecksums 0 # Number of rx UDP Checksums done by device
|
|
drivesys.tsunami.ethernet.descDMAReads 2087584 # Number of descriptors the device read w/ DMA
|
|
drivesys.tsunami.ethernet.descDMAWrites 13 # Number of descriptors the device wrote w/ DMA
|
|
drivesys.tsunami.ethernet.descDmaReadBytes 50102016 # number of descriptor bytes read w/ DMA
|
|
drivesys.tsunami.ethernet.descDmaWriteBytes 104 # number of descriptor bytes write w/ DMA
|
|
drivesys.tsunami.ethernet.totBandwidth 70176 # Total Bandwidth (bits/s)
|
|
drivesys.tsunami.ethernet.totPackets 13 # Total Packets
|
|
drivesys.tsunami.ethernet.totBytes 1758 # Total Bytes
|
|
drivesys.tsunami.ethernet.totPPS 65 # Total Tranmission Rate (packets/s)
|
|
drivesys.tsunami.ethernet.txBandwidth 31855 # Transmit Bandwidth (bits/s)
|
|
drivesys.tsunami.ethernet.rxBandwidth 38322 # Receive Bandwidth (bits/s)
|
|
drivesys.tsunami.ethernet.txPPS 25 # Packet Tranmission Rate (packets/s)
|
|
drivesys.tsunami.ethernet.rxPPS 40 # Packet Reception Rate (packets/s)
|
|
drivesys.tsunami.ethernet.postedSwi 0 # number of software interrupts posted to CPU
|
|
drivesys.tsunami.ethernet.coalescedSwi 0 # average number of Swi's coalesced into each post
|
|
drivesys.tsunami.ethernet.totalSwi 0 # total number of Swi written to ISR
|
|
drivesys.tsunami.ethernet.postedRxIdle 0 # number of rxIdle interrupts posted to CPU
|
|
drivesys.tsunami.ethernet.coalescedRxIdle 0 # average number of RxIdle's coalesced into each post
|
|
drivesys.tsunami.ethernet.totalRxIdle 0 # total number of RxIdle written to ISR
|
|
drivesys.tsunami.ethernet.postedRxOk 0 # number of RxOk interrupts posted to CPU
|
|
drivesys.tsunami.ethernet.coalescedRxOk 0 # average number of RxOk's coalesced into each post
|
|
drivesys.tsunami.ethernet.totalRxOk 0 # total number of RxOk written to ISR
|
|
drivesys.tsunami.ethernet.postedRxDesc 8 # number of RxDesc interrupts posted to CPU
|
|
drivesys.tsunami.ethernet.coalescedRxDesc 0 # average number of RxDesc's coalesced into each post
|
|
drivesys.tsunami.ethernet.totalRxDesc 8 # total number of RxDesc written to ISR
|
|
drivesys.tsunami.ethernet.postedTxOk 0 # number of TxOk interrupts posted to CPU
|
|
drivesys.tsunami.ethernet.coalescedTxOk 0 # average number of TxOk's coalesced into each post
|
|
drivesys.tsunami.ethernet.totalTxOk 0 # total number of TxOk written to ISR
|
|
drivesys.tsunami.ethernet.postedTxIdle 19702 # number of TxIdle interrupts posted to CPU
|
|
drivesys.tsunami.ethernet.coalescedTxIdle 1 # average number of TxIdle's coalesced into each post
|
|
drivesys.tsunami.ethernet.totalTxIdle 2087584 # total number of TxIdle written to ISR
|
|
drivesys.tsunami.ethernet.postedTxDesc 0 # number of TxDesc interrupts posted to CPU
|
|
drivesys.tsunami.ethernet.coalescedTxDesc 0 # average number of TxDesc's coalesced into each post
|
|
drivesys.tsunami.ethernet.totalTxDesc 0 # total number of TxDesc written to ISR
|
|
drivesys.tsunami.ethernet.postedRxOrn 0 # number of RxOrn posted to CPU
|
|
drivesys.tsunami.ethernet.coalescedRxOrn 0 # average number of RxOrn's coalesced into each post
|
|
drivesys.tsunami.ethernet.totalRxOrn 0 # total number of RxOrn written to ISR
|
|
drivesys.tsunami.ethernet.coalescedTotal 1 # average number of interrupts coalesced into each post
|
|
drivesys.tsunami.ethernet.postedInterrupts 2087605 # number of posts to CPU
|
|
drivesys.tsunami.ethernet.droppedPackets 0 # number of packets dropped
|
|
|
|
---------- End Simulation Statistics ----------
|
|
|
|
---------- Begin Simulation Statistics ----------
|
|
sim_seconds 0.000407 # Number of seconds simulated
|
|
sim_ticks 406952000 # Number of ticks simulated
|
|
final_tick 4321612280500 # Number of ticks from beginning of simulation (restored from checkpoints and never reset)
|
|
sim_freq 1000000000000 # Frequency of simulated ticks
|
|
host_inst_rate 7058170696 # Simulator instruction rate (inst/s)
|
|
host_op_rate 7056390513 # Simulator op (including micro ops) rate (op/s)
|
|
host_tick_rate 5484794115 # Simulator tick rate (ticks/s)
|
|
host_mem_usage 514692 # Number of bytes of host memory used
|
|
host_seconds 0.07 # Real time elapsed on the host
|
|
sim_insts 523432506 # Number of instructions simulated
|
|
sim_ops 523432506 # Number of ops (including micro ops) simulated
|
|
testsys.physmem.bytes_read::cpu.inst 144604 # Number of bytes read from this memory
|
|
testsys.physmem.bytes_read::cpu.data 49952 # Number of bytes read from this memory
|
|
testsys.physmem.bytes_read::tsunami.ethernet 101736 # Number of bytes read from this memory
|
|
testsys.physmem.bytes_read::total 296292 # Number of bytes read from this memory
|
|
testsys.physmem.bytes_inst_read::cpu.inst 144604 # Number of instructions bytes read from this memory
|
|
testsys.physmem.bytes_inst_read::total 144604 # Number of instructions bytes read from this memory
|
|
testsys.physmem.bytes_written::cpu.data 27688 # Number of bytes written to this memory
|
|
testsys.physmem.bytes_written::total 27688 # Number of bytes written to this memory
|
|
testsys.physmem.num_reads::cpu.inst 36151 # Number of read requests responded to by this memory
|
|
testsys.physmem.num_reads::cpu.data 6909 # Number of read requests responded to by this memory
|
|
testsys.physmem.num_reads::tsunami.ethernet 4239 # Number of read requests responded to by this memory
|
|
testsys.physmem.num_reads::total 47299 # Number of read requests responded to by this memory
|
|
testsys.physmem.num_writes::cpu.data 3812 # Number of write requests responded to by this memory
|
|
testsys.physmem.num_writes::total 3812 # Number of write requests responded to by this memory
|
|
testsys.physmem.bw_read::cpu.inst 355334290 # Total read bandwidth from this memory (bytes/s)
|
|
testsys.physmem.bw_read::cpu.data 122746663 # Total read bandwidth from this memory (bytes/s)
|
|
testsys.physmem.bw_read::tsunami.ethernet 249995085 # Total read bandwidth from this memory (bytes/s)
|
|
testsys.physmem.bw_read::total 728076038 # Total read bandwidth from this memory (bytes/s)
|
|
testsys.physmem.bw_inst_read::cpu.inst 355334290 # Instruction read bandwidth from this memory (bytes/s)
|
|
testsys.physmem.bw_inst_read::total 355334290 # Instruction read bandwidth from this memory (bytes/s)
|
|
testsys.physmem.bw_write::cpu.data 68037508 # Write bandwidth from this memory (bytes/s)
|
|
testsys.physmem.bw_write::total 68037508 # Write bandwidth from this memory (bytes/s)
|
|
testsys.physmem.bw_total::cpu.inst 355334290 # Total bandwidth to/from this memory (bytes/s)
|
|
testsys.physmem.bw_total::cpu.data 190784171 # Total bandwidth to/from this memory (bytes/s)
|
|
testsys.physmem.bw_total::tsunami.ethernet 249995085 # Total bandwidth to/from this memory (bytes/s)
|
|
testsys.physmem.bw_total::total 796113547 # Total bandwidth to/from this memory (bytes/s)
|
|
testsys.physmem.readReqs 0 # Total number of read requests seen
|
|
testsys.physmem.writeReqs 0 # Total number of write requests seen
|
|
testsys.physmem.cpureqs 0 # Reqs generatd by CPU via cache - shady
|
|
testsys.physmem.bytesRead 0 # Total number of bytes read from memory
|
|
testsys.physmem.bytesWritten 0 # Total number of bytes written to memory
|
|
testsys.physmem.bytesConsumedRd 0 # bytesRead derated as per pkt->getSize()
|
|
testsys.physmem.bytesConsumedWr 0 # bytesWritten derated as per pkt->getSize()
|
|
testsys.physmem.servicedByWrQ 0 # Number of read reqs serviced by write Q
|
|
testsys.physmem.neitherReadNorWrite 0 # Reqs where no action is needed
|
|
testsys.physmem.perBankRdReqs::0 0 # Track reads on a per bank basis
|
|
testsys.physmem.perBankRdReqs::1 0 # Track reads on a per bank basis
|
|
testsys.physmem.perBankRdReqs::2 0 # Track reads on a per bank basis
|
|
testsys.physmem.perBankRdReqs::3 0 # Track reads on a per bank basis
|
|
testsys.physmem.perBankRdReqs::4 0 # Track reads on a per bank basis
|
|
testsys.physmem.perBankRdReqs::5 0 # Track reads on a per bank basis
|
|
testsys.physmem.perBankRdReqs::6 0 # Track reads on a per bank basis
|
|
testsys.physmem.perBankRdReqs::7 0 # Track reads on a per bank basis
|
|
testsys.physmem.perBankRdReqs::8 0 # Track reads on a per bank basis
|
|
testsys.physmem.perBankRdReqs::9 0 # Track reads on a per bank basis
|
|
testsys.physmem.perBankRdReqs::10 0 # Track reads on a per bank basis
|
|
testsys.physmem.perBankRdReqs::11 0 # Track reads on a per bank basis
|
|
testsys.physmem.perBankRdReqs::12 0 # Track reads on a per bank basis
|
|
testsys.physmem.perBankRdReqs::13 0 # Track reads on a per bank basis
|
|
testsys.physmem.perBankRdReqs::14 0 # Track reads on a per bank basis
|
|
testsys.physmem.perBankRdReqs::15 0 # Track reads on a per bank basis
|
|
testsys.physmem.perBankWrReqs::0 0 # Track writes on a per bank basis
|
|
testsys.physmem.perBankWrReqs::1 0 # Track writes on a per bank basis
|
|
testsys.physmem.perBankWrReqs::2 0 # Track writes on a per bank basis
|
|
testsys.physmem.perBankWrReqs::3 0 # Track writes on a per bank basis
|
|
testsys.physmem.perBankWrReqs::4 0 # Track writes on a per bank basis
|
|
testsys.physmem.perBankWrReqs::5 0 # Track writes on a per bank basis
|
|
testsys.physmem.perBankWrReqs::6 0 # Track writes on a per bank basis
|
|
testsys.physmem.perBankWrReqs::7 0 # Track writes on a per bank basis
|
|
testsys.physmem.perBankWrReqs::8 0 # Track writes on a per bank basis
|
|
testsys.physmem.perBankWrReqs::9 0 # Track writes on a per bank basis
|
|
testsys.physmem.perBankWrReqs::10 0 # Track writes on a per bank basis
|
|
testsys.physmem.perBankWrReqs::11 0 # Track writes on a per bank basis
|
|
testsys.physmem.perBankWrReqs::12 0 # Track writes on a per bank basis
|
|
testsys.physmem.perBankWrReqs::13 0 # Track writes on a per bank basis
|
|
testsys.physmem.perBankWrReqs::14 0 # Track writes on a per bank basis
|
|
testsys.physmem.perBankWrReqs::15 0 # Track writes on a per bank basis
|
|
testsys.physmem.numRdRetry 0 # Number of times rd buffer was full causing retry
|
|
testsys.physmem.numWrRetry 0 # Number of times wr buffer was full causing retry
|
|
testsys.physmem.totGap 0 # Total gap between requests
|
|
testsys.physmem.readPktSize::0 0 # Categorize read packet sizes
|
|
testsys.physmem.readPktSize::1 0 # Categorize read packet sizes
|
|
testsys.physmem.readPktSize::2 0 # Categorize read packet sizes
|
|
testsys.physmem.readPktSize::3 0 # Categorize read packet sizes
|
|
testsys.physmem.readPktSize::4 0 # Categorize read packet sizes
|
|
testsys.physmem.readPktSize::5 0 # Categorize read packet sizes
|
|
testsys.physmem.readPktSize::6 0 # Categorize read packet sizes
|
|
testsys.physmem.readPktSize::7 0 # Categorize read packet sizes
|
|
testsys.physmem.readPktSize::8 0 # Categorize read packet sizes
|
|
testsys.physmem.writePktSize::0 0 # categorize write packet sizes
|
|
testsys.physmem.writePktSize::1 0 # categorize write packet sizes
|
|
testsys.physmem.writePktSize::2 0 # categorize write packet sizes
|
|
testsys.physmem.writePktSize::3 0 # categorize write packet sizes
|
|
testsys.physmem.writePktSize::4 0 # categorize write packet sizes
|
|
testsys.physmem.writePktSize::5 0 # categorize write packet sizes
|
|
testsys.physmem.writePktSize::6 0 # categorize write packet sizes
|
|
testsys.physmem.writePktSize::7 0 # categorize write packet sizes
|
|
testsys.physmem.writePktSize::8 0 # categorize write packet sizes
|
|
testsys.physmem.neitherpktsize::0 0 # categorize neither packet sizes
|
|
testsys.physmem.neitherpktsize::1 0 # categorize neither packet sizes
|
|
testsys.physmem.neitherpktsize::2 0 # categorize neither packet sizes
|
|
testsys.physmem.neitherpktsize::3 0 # categorize neither packet sizes
|
|
testsys.physmem.neitherpktsize::4 0 # categorize neither packet sizes
|
|
testsys.physmem.neitherpktsize::5 0 # categorize neither packet sizes
|
|
testsys.physmem.neitherpktsize::6 0 # categorize neither packet sizes
|
|
testsys.physmem.neitherpktsize::7 0 # categorize neither packet sizes
|
|
testsys.physmem.neitherpktsize::8 0 # categorize neither packet sizes
|
|
testsys.physmem.rdQLenPdf::0 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::1 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::2 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::3 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::4 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::5 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::6 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::7 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::8 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::9 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::10 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::11 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::12 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::13 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::14 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::15 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::16 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::17 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::18 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::19 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::20 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::21 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::22 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::23 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::24 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::25 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::26 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::27 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::28 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::29 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::30 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::31 0 # What read queue length does an incoming req see
|
|
testsys.physmem.rdQLenPdf::32 0 # What read queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::0 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::1 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::2 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::3 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::4 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::5 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::6 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::7 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::8 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::9 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::10 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::11 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::12 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::13 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::14 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::15 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::16 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::17 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::18 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::19 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::20 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::21 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::22 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::23 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::24 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::25 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::26 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::27 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::28 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::29 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::30 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::31 0 # What write queue length does an incoming req see
|
|
testsys.physmem.wrQLenPdf::32 0 # What write queue length does an incoming req see
|
|
testsys.physmem.totQLat 0 # Total cycles spent in queuing delays
|
|
testsys.physmem.totMemAccLat 0 # Sum of mem lat for all requests
|
|
testsys.physmem.totBusLat 0 # Total cycles spent in databus access
|
|
testsys.physmem.totBankLat 0 # Total cycles spent in bank access
|
|
testsys.physmem.avgQLat nan # Average queueing delay per request
|
|
testsys.physmem.avgBankLat nan # Average bank access latency per request
|
|
testsys.physmem.avgBusLat nan # Average bus latency per request
|
|
testsys.physmem.avgMemAccLat nan # Average memory access latency
|
|
testsys.physmem.avgRdBW 0.00 # Average achieved read bandwidth in MB/s
|
|
testsys.physmem.avgWrBW 0.00 # Average achieved write bandwidth in MB/s
|
|
testsys.physmem.avgConsumedRdBW 0.00 # Average consumed read bandwidth in MB/s
|
|
testsys.physmem.avgConsumedWrBW 0.00 # Average consumed write bandwidth in MB/s
|
|
testsys.physmem.peakBW 16000.00 # Theoretical peak bandwidth in MB/s
|
|
testsys.physmem.busUtil 0.00 # Data bus utilization in percentage
|
|
testsys.physmem.avgRdQLen 0.00 # Average read queue length over time
|
|
testsys.physmem.avgWrQLen 0.00 # Average write queue length over time
|
|
testsys.physmem.readRowHits 0 # Number of row buffer hits during reads
|
|
testsys.physmem.writeRowHits 0 # Number of row buffer hits during writes
|
|
testsys.physmem.readRowHitRate nan # Row buffer hit rate for reads
|
|
testsys.physmem.writeRowHitRate nan # Row buffer hit rate for writes
|
|
testsys.physmem.avgGap nan # Average gap between requests
|
|
testsys.disk0.dma_read_full_pages 0 # Number of full page size DMA reads (not PRD).
|
|
testsys.disk0.dma_read_bytes 0 # Number of bytes transfered via DMA reads (not PRD).
|
|
testsys.disk0.dma_read_txs 0 # Number of DMA read transactions (not PRD).
|
|
testsys.disk0.dma_write_full_pages 0 # Number of full page size DMA writes.
|
|
testsys.disk0.dma_write_bytes 0 # Number of bytes transfered via DMA writes.
|
|
testsys.disk0.dma_write_txs 0 # Number of DMA write transactions.
|
|
testsys.disk2.dma_read_full_pages 0 # Number of full page size DMA reads (not PRD).
|
|
testsys.disk2.dma_read_bytes 0 # Number of bytes transfered via DMA reads (not PRD).
|
|
testsys.disk2.dma_read_txs 0 # Number of DMA read transactions (not PRD).
|
|
testsys.disk2.dma_write_full_pages 0 # Number of full page size DMA writes.
|
|
testsys.disk2.dma_write_bytes 0 # Number of bytes transfered via DMA writes.
|
|
testsys.disk2.dma_write_txs 0 # Number of DMA write transactions.
|
|
testsys.cpu.dtb.fetch_hits 0 # ITB hits
|
|
testsys.cpu.dtb.fetch_misses 0 # ITB misses
|
|
testsys.cpu.dtb.fetch_acv 0 # ITB acv
|
|
testsys.cpu.dtb.fetch_accesses 0 # ITB accesses
|
|
testsys.cpu.dtb.read_hits 7069 # DTB read hits
|
|
testsys.cpu.dtb.read_misses 0 # DTB read misses
|
|
testsys.cpu.dtb.read_acv 0 # DTB read access violations
|
|
testsys.cpu.dtb.read_accesses 0 # DTB read accesses
|
|
testsys.cpu.dtb.write_hits 3933 # DTB write hits
|
|
testsys.cpu.dtb.write_misses 0 # DTB write misses
|
|
testsys.cpu.dtb.write_acv 0 # DTB write access violations
|
|
testsys.cpu.dtb.write_accesses 0 # DTB write accesses
|
|
testsys.cpu.dtb.data_hits 11002 # DTB hits
|
|
testsys.cpu.dtb.data_misses 0 # DTB misses
|
|
testsys.cpu.dtb.data_acv 0 # DTB access violations
|
|
testsys.cpu.dtb.data_accesses 0 # DTB accesses
|
|
testsys.cpu.itb.fetch_hits 5992 # ITB hits
|
|
testsys.cpu.itb.fetch_misses 0 # ITB misses
|
|
testsys.cpu.itb.fetch_acv 0 # ITB acv
|
|
testsys.cpu.itb.fetch_accesses 5992 # ITB accesses
|
|
testsys.cpu.itb.read_hits 0 # DTB read hits
|
|
testsys.cpu.itb.read_misses 0 # DTB read misses
|
|
testsys.cpu.itb.read_acv 0 # DTB read access violations
|
|
testsys.cpu.itb.read_accesses 0 # DTB read accesses
|
|
testsys.cpu.itb.write_hits 0 # DTB write hits
|
|
testsys.cpu.itb.write_misses 0 # DTB write misses
|
|
testsys.cpu.itb.write_acv 0 # DTB write access violations
|
|
testsys.cpu.itb.write_accesses 0 # DTB write accesses
|
|
testsys.cpu.itb.data_hits 0 # DTB hits
|
|
testsys.cpu.itb.data_misses 0 # DTB misses
|
|
testsys.cpu.itb.data_acv 0 # DTB access violations
|
|
testsys.cpu.itb.data_accesses 0 # DTB accesses
|
|
testsys.cpu.numCycles 821760 # number of cpu cycles simulated
|
|
testsys.cpu.numWorkItemsStarted 0 # number of work items this cpu started
|
|
testsys.cpu.numWorkItemsCompleted 0 # number of work items this cpu completed
|
|
testsys.cpu.committedInsts 36151 # Number of instructions committed
|
|
testsys.cpu.committedOps 36151 # Number of ops (including micro ops) committed
|
|
testsys.cpu.num_int_alu_accesses 33514 # Number of integer alu accesses
|
|
testsys.cpu.num_fp_alu_accesses 0 # Number of float alu accesses
|
|
testsys.cpu.num_func_calls 2388 # number of times a function call or return occured
|
|
testsys.cpu.num_conditional_control_insts 2348 # number of instructions that are conditional controls
|
|
testsys.cpu.num_int_insts 33514 # number of integer instructions
|
|
testsys.cpu.num_fp_insts 0 # number of float instructions
|
|
testsys.cpu.num_int_register_reads 43768 # number of times the integer registers were read
|
|
testsys.cpu.num_int_register_writes 26496 # number of times the integer registers were written
|
|
testsys.cpu.num_fp_register_reads 0 # number of times the floating registers were read
|
|
testsys.cpu.num_fp_register_writes 0 # number of times the floating registers were written
|
|
testsys.cpu.num_mem_refs 11043 # number of memory refs
|
|
testsys.cpu.num_load_insts 7109 # Number of load instructions
|
|
testsys.cpu.num_store_insts 3934 # Number of store instructions
|
|
testsys.cpu.num_idle_cycles 785260.061817 # Number of idle cycles
|
|
testsys.cpu.num_busy_cycles 36499.938183 # Number of busy cycles
|
|
testsys.cpu.not_idle_fraction 0.044417 # Percentage of non-idle cycles
|
|
testsys.cpu.idle_fraction 0.955583 # Percentage of idle cycles
|
|
testsys.cpu.kern.inst.arm 0 # number of arm instructions executed
|
|
testsys.cpu.kern.inst.quiesce 41 # number of quiesce instructions executed
|
|
testsys.cpu.kern.inst.hwrei 295 # number of hwrei instructions executed
|
|
testsys.cpu.kern.ipl_count::0 123 41.84% 41.84% # number of times we switched to this ipl
|
|
testsys.cpu.kern.ipl_count::21 40 13.61% 55.44% # number of times we switched to this ipl
|
|
testsys.cpu.kern.ipl_count::22 1 0.34% 55.78% # number of times we switched to this ipl
|
|
testsys.cpu.kern.ipl_count::31 130 44.22% 100.00% # number of times we switched to this ipl
|
|
testsys.cpu.kern.ipl_count::total 294 # number of times we switched to this ipl
|
|
testsys.cpu.kern.ipl_good::0 123 42.86% 42.86% # number of times we switched to this ipl from a different ipl
|
|
testsys.cpu.kern.ipl_good::21 40 13.94% 56.79% # number of times we switched to this ipl from a different ipl
|
|
testsys.cpu.kern.ipl_good::22 1 0.35% 57.14% # number of times we switched to this ipl from a different ipl
|
|
testsys.cpu.kern.ipl_good::31 123 42.86% 100.00% # number of times we switched to this ipl from a different ipl
|
|
testsys.cpu.kern.ipl_good::total 287 # number of times we switched to this ipl from a different ipl
|
|
testsys.cpu.kern.ipl_ticks::0 398338500 96.95% 96.95% # number of cycles we spent at this ipl
|
|
testsys.cpu.kern.ipl_ticks::21 3240000 0.79% 97.74% # number of cycles we spent at this ipl
|
|
testsys.cpu.kern.ipl_ticks::22 43000 0.01% 97.75% # number of cycles we spent at this ipl
|
|
testsys.cpu.kern.ipl_ticks::31 9258500 2.25% 100.00% # number of cycles we spent at this ipl
|
|
testsys.cpu.kern.ipl_ticks::total 410880000 # number of cycles we spent at this ipl
|
|
testsys.cpu.kern.ipl_used::0 1 # fraction of swpipl calls that actually changed the ipl
|
|
testsys.cpu.kern.ipl_used::21 1 # fraction of swpipl calls that actually changed the ipl
|
|
testsys.cpu.kern.ipl_used::22 1 # fraction of swpipl calls that actually changed the ipl
|
|
testsys.cpu.kern.ipl_used::31 0.946154 # fraction of swpipl calls that actually changed the ipl
|
|
testsys.cpu.kern.ipl_used::total 0.976190 # fraction of swpipl calls that actually changed the ipl
|
|
testsys.cpu.kern.callpal::swpipl 212 83.46% 83.46% # number of callpals executed
|
|
testsys.cpu.kern.callpal::rdps 1 0.39% 83.86% # number of callpals executed
|
|
testsys.cpu.kern.callpal::rti 41 16.14% 100.00% # number of callpals executed
|
|
testsys.cpu.kern.callpal::total 254 # number of callpals executed
|
|
testsys.cpu.kern.mode_switch::kernel 0 # number of protection mode switches
|
|
testsys.cpu.kern.mode_switch::user 0 # number of protection mode switches
|
|
testsys.cpu.kern.mode_switch::idle 41 # number of protection mode switches
|
|
testsys.cpu.kern.mode_good::kernel 0
|
|
testsys.cpu.kern.mode_good::user 0
|
|
testsys.cpu.kern.mode_good::idle 0
|
|
testsys.cpu.kern.mode_switch_good::kernel nan # fraction of useful protection mode switches
|
|
testsys.cpu.kern.mode_switch_good::user nan # fraction of useful protection mode switches
|
|
testsys.cpu.kern.mode_switch_good::idle 0 # fraction of useful protection mode switches
|
|
testsys.cpu.kern.mode_switch_good::total 0 # fraction of useful protection mode switches
|
|
testsys.cpu.kern.mode_ticks::kernel 0 # number of ticks spent at the given mode
|
|
testsys.cpu.kern.mode_ticks::user 0 # number of ticks spent at the given mode
|
|
testsys.cpu.kern.mode_ticks::idle 0 # number of ticks spent at the given mode
|
|
testsys.cpu.kern.swap_context 0 # number of times the context was actually changed
|
|
testsys.tsunami.ethernet.descDMAReads 4239 # Number of descriptors the device read w/ DMA
|
|
testsys.tsunami.ethernet.descDMAWrites 0 # Number of descriptors the device wrote w/ DMA
|
|
testsys.tsunami.ethernet.descDmaReadBytes 101736 # number of descriptor bytes read w/ DMA
|
|
testsys.tsunami.ethernet.descDmaWriteBytes 0 # number of descriptor bytes write w/ DMA
|
|
testsys.tsunami.ethernet.postedSwi 0 # number of software interrupts posted to CPU
|
|
testsys.tsunami.ethernet.coalescedSwi 0 # average number of Swi's coalesced into each post
|
|
testsys.tsunami.ethernet.totalSwi 0 # total number of Swi written to ISR
|
|
testsys.tsunami.ethernet.postedRxIdle 0 # number of rxIdle interrupts posted to CPU
|
|
testsys.tsunami.ethernet.coalescedRxIdle 0 # average number of RxIdle's coalesced into each post
|
|
testsys.tsunami.ethernet.totalRxIdle 0 # total number of RxIdle written to ISR
|
|
testsys.tsunami.ethernet.postedRxOk 0 # number of RxOk interrupts posted to CPU
|
|
testsys.tsunami.ethernet.coalescedRxOk 0 # average number of RxOk's coalesced into each post
|
|
testsys.tsunami.ethernet.totalRxOk 0 # total number of RxOk written to ISR
|
|
testsys.tsunami.ethernet.postedRxDesc 0 # number of RxDesc interrupts posted to CPU
|
|
testsys.tsunami.ethernet.coalescedRxDesc 0 # average number of RxDesc's coalesced into each post
|
|
testsys.tsunami.ethernet.totalRxDesc 0 # total number of RxDesc written to ISR
|
|
testsys.tsunami.ethernet.postedTxOk 0 # number of TxOk interrupts posted to CPU
|
|
testsys.tsunami.ethernet.coalescedTxOk 0 # average number of TxOk's coalesced into each post
|
|
testsys.tsunami.ethernet.totalTxOk 0 # total number of TxOk written to ISR
|
|
testsys.tsunami.ethernet.postedTxIdle 40 # number of TxIdle interrupts posted to CPU
|
|
testsys.tsunami.ethernet.coalescedTxIdle 1 # average number of TxIdle's coalesced into each post
|
|
testsys.tsunami.ethernet.totalTxIdle 4239 # total number of TxIdle written to ISR
|
|
testsys.tsunami.ethernet.postedTxDesc 0 # number of TxDesc interrupts posted to CPU
|
|
testsys.tsunami.ethernet.coalescedTxDesc 0 # average number of TxDesc's coalesced into each post
|
|
testsys.tsunami.ethernet.totalTxDesc 0 # total number of TxDesc written to ISR
|
|
testsys.tsunami.ethernet.postedRxOrn 0 # number of RxOrn posted to CPU
|
|
testsys.tsunami.ethernet.coalescedRxOrn 0 # average number of RxOrn's coalesced into each post
|
|
testsys.tsunami.ethernet.totalRxOrn 0 # total number of RxOrn written to ISR
|
|
testsys.tsunami.ethernet.coalescedTotal 1 # average number of interrupts coalesced into each post
|
|
testsys.tsunami.ethernet.postedInterrupts 4239 # number of posts to CPU
|
|
testsys.tsunami.ethernet.droppedPackets 0 # number of packets dropped
|
|
drivesys.physmem.bytes_read::cpu.inst 144608 # Number of bytes read from this memory
|
|
drivesys.physmem.bytes_read::cpu.data 49952 # Number of bytes read from this memory
|
|
drivesys.physmem.bytes_read::tsunami.ethernet 101736 # Number of bytes read from this memory
|
|
drivesys.physmem.bytes_read::total 296296 # Number of bytes read from this memory
|
|
drivesys.physmem.bytes_inst_read::cpu.inst 144608 # Number of instructions bytes read from this memory
|
|
drivesys.physmem.bytes_inst_read::total 144608 # Number of instructions bytes read from this memory
|
|
drivesys.physmem.bytes_written::cpu.data 27688 # Number of bytes written to this memory
|
|
drivesys.physmem.bytes_written::total 27688 # Number of bytes written to this memory
|
|
drivesys.physmem.num_reads::cpu.inst 36152 # Number of read requests responded to by this memory
|
|
drivesys.physmem.num_reads::cpu.data 6909 # Number of read requests responded to by this memory
|
|
drivesys.physmem.num_reads::tsunami.ethernet 4239 # Number of read requests responded to by this memory
|
|
drivesys.physmem.num_reads::total 47300 # Number of read requests responded to by this memory
|
|
drivesys.physmem.num_writes::cpu.data 3812 # Number of write requests responded to by this memory
|
|
drivesys.physmem.num_writes::total 3812 # Number of write requests responded to by this memory
|
|
drivesys.physmem.bw_read::cpu.inst 355344119 # Total read bandwidth from this memory (bytes/s)
|
|
drivesys.physmem.bw_read::cpu.data 122746663 # Total read bandwidth from this memory (bytes/s)
|
|
drivesys.physmem.bw_read::tsunami.ethernet 249995085 # Total read bandwidth from this memory (bytes/s)
|
|
drivesys.physmem.bw_read::total 728085868 # Total read bandwidth from this memory (bytes/s)
|
|
drivesys.physmem.bw_inst_read::cpu.inst 355344119 # Instruction read bandwidth from this memory (bytes/s)
|
|
drivesys.physmem.bw_inst_read::total 355344119 # Instruction read bandwidth from this memory (bytes/s)
|
|
drivesys.physmem.bw_write::cpu.data 68037508 # Write bandwidth from this memory (bytes/s)
|
|
drivesys.physmem.bw_write::total 68037508 # Write bandwidth from this memory (bytes/s)
|
|
drivesys.physmem.bw_total::cpu.inst 355344119 # Total bandwidth to/from this memory (bytes/s)
|
|
drivesys.physmem.bw_total::cpu.data 190784171 # Total bandwidth to/from this memory (bytes/s)
|
|
drivesys.physmem.bw_total::tsunami.ethernet 249995085 # Total bandwidth to/from this memory (bytes/s)
|
|
drivesys.physmem.bw_total::total 796123376 # Total bandwidth to/from this memory (bytes/s)
|
|
drivesys.physmem.readReqs 0 # Total number of read requests seen
|
|
drivesys.physmem.writeReqs 0 # Total number of write requests seen
|
|
drivesys.physmem.cpureqs 0 # Reqs generatd by CPU via cache - shady
|
|
drivesys.physmem.bytesRead 0 # Total number of bytes read from memory
|
|
drivesys.physmem.bytesWritten 0 # Total number of bytes written to memory
|
|
drivesys.physmem.bytesConsumedRd 0 # bytesRead derated as per pkt->getSize()
|
|
drivesys.physmem.bytesConsumedWr 0 # bytesWritten derated as per pkt->getSize()
|
|
drivesys.physmem.servicedByWrQ 0 # Number of read reqs serviced by write Q
|
|
drivesys.physmem.neitherReadNorWrite 0 # Reqs where no action is needed
|
|
drivesys.physmem.perBankRdReqs::0 0 # Track reads on a per bank basis
|
|
drivesys.physmem.perBankRdReqs::1 0 # Track reads on a per bank basis
|
|
drivesys.physmem.perBankRdReqs::2 0 # Track reads on a per bank basis
|
|
drivesys.physmem.perBankRdReqs::3 0 # Track reads on a per bank basis
|
|
drivesys.physmem.perBankRdReqs::4 0 # Track reads on a per bank basis
|
|
drivesys.physmem.perBankRdReqs::5 0 # Track reads on a per bank basis
|
|
drivesys.physmem.perBankRdReqs::6 0 # Track reads on a per bank basis
|
|
drivesys.physmem.perBankRdReqs::7 0 # Track reads on a per bank basis
|
|
drivesys.physmem.perBankRdReqs::8 0 # Track reads on a per bank basis
|
|
drivesys.physmem.perBankRdReqs::9 0 # Track reads on a per bank basis
|
|
drivesys.physmem.perBankRdReqs::10 0 # Track reads on a per bank basis
|
|
drivesys.physmem.perBankRdReqs::11 0 # Track reads on a per bank basis
|
|
drivesys.physmem.perBankRdReqs::12 0 # Track reads on a per bank basis
|
|
drivesys.physmem.perBankRdReqs::13 0 # Track reads on a per bank basis
|
|
drivesys.physmem.perBankRdReqs::14 0 # Track reads on a per bank basis
|
|
drivesys.physmem.perBankRdReqs::15 0 # Track reads on a per bank basis
|
|
drivesys.physmem.perBankWrReqs::0 0 # Track writes on a per bank basis
|
|
drivesys.physmem.perBankWrReqs::1 0 # Track writes on a per bank basis
|
|
drivesys.physmem.perBankWrReqs::2 0 # Track writes on a per bank basis
|
|
drivesys.physmem.perBankWrReqs::3 0 # Track writes on a per bank basis
|
|
drivesys.physmem.perBankWrReqs::4 0 # Track writes on a per bank basis
|
|
drivesys.physmem.perBankWrReqs::5 0 # Track writes on a per bank basis
|
|
drivesys.physmem.perBankWrReqs::6 0 # Track writes on a per bank basis
|
|
drivesys.physmem.perBankWrReqs::7 0 # Track writes on a per bank basis
|
|
drivesys.physmem.perBankWrReqs::8 0 # Track writes on a per bank basis
|
|
drivesys.physmem.perBankWrReqs::9 0 # Track writes on a per bank basis
|
|
drivesys.physmem.perBankWrReqs::10 0 # Track writes on a per bank basis
|
|
drivesys.physmem.perBankWrReqs::11 0 # Track writes on a per bank basis
|
|
drivesys.physmem.perBankWrReqs::12 0 # Track writes on a per bank basis
|
|
drivesys.physmem.perBankWrReqs::13 0 # Track writes on a per bank basis
|
|
drivesys.physmem.perBankWrReqs::14 0 # Track writes on a per bank basis
|
|
drivesys.physmem.perBankWrReqs::15 0 # Track writes on a per bank basis
|
|
drivesys.physmem.numRdRetry 0 # Number of times rd buffer was full causing retry
|
|
drivesys.physmem.numWrRetry 0 # Number of times wr buffer was full causing retry
|
|
drivesys.physmem.totGap 0 # Total gap between requests
|
|
drivesys.physmem.readPktSize::0 0 # Categorize read packet sizes
|
|
drivesys.physmem.readPktSize::1 0 # Categorize read packet sizes
|
|
drivesys.physmem.readPktSize::2 0 # Categorize read packet sizes
|
|
drivesys.physmem.readPktSize::3 0 # Categorize read packet sizes
|
|
drivesys.physmem.readPktSize::4 0 # Categorize read packet sizes
|
|
drivesys.physmem.readPktSize::5 0 # Categorize read packet sizes
|
|
drivesys.physmem.readPktSize::6 0 # Categorize read packet sizes
|
|
drivesys.physmem.readPktSize::7 0 # Categorize read packet sizes
|
|
drivesys.physmem.readPktSize::8 0 # Categorize read packet sizes
|
|
drivesys.physmem.writePktSize::0 0 # categorize write packet sizes
|
|
drivesys.physmem.writePktSize::1 0 # categorize write packet sizes
|
|
drivesys.physmem.writePktSize::2 0 # categorize write packet sizes
|
|
drivesys.physmem.writePktSize::3 0 # categorize write packet sizes
|
|
drivesys.physmem.writePktSize::4 0 # categorize write packet sizes
|
|
drivesys.physmem.writePktSize::5 0 # categorize write packet sizes
|
|
drivesys.physmem.writePktSize::6 0 # categorize write packet sizes
|
|
drivesys.physmem.writePktSize::7 0 # categorize write packet sizes
|
|
drivesys.physmem.writePktSize::8 0 # categorize write packet sizes
|
|
drivesys.physmem.neitherpktsize::0 0 # categorize neither packet sizes
|
|
drivesys.physmem.neitherpktsize::1 0 # categorize neither packet sizes
|
|
drivesys.physmem.neitherpktsize::2 0 # categorize neither packet sizes
|
|
drivesys.physmem.neitherpktsize::3 0 # categorize neither packet sizes
|
|
drivesys.physmem.neitherpktsize::4 0 # categorize neither packet sizes
|
|
drivesys.physmem.neitherpktsize::5 0 # categorize neither packet sizes
|
|
drivesys.physmem.neitherpktsize::6 0 # categorize neither packet sizes
|
|
drivesys.physmem.neitherpktsize::7 0 # categorize neither packet sizes
|
|
drivesys.physmem.neitherpktsize::8 0 # categorize neither packet sizes
|
|
drivesys.physmem.rdQLenPdf::0 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::1 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::2 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::3 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::4 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::5 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::6 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::7 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::8 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::9 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::10 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::11 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::12 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::13 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::14 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::15 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::16 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::17 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::18 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::19 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::20 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::21 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::22 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::23 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::24 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::25 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::26 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::27 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::28 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::29 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::30 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::31 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.rdQLenPdf::32 0 # What read queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::0 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::1 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::2 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::3 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::4 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::5 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::6 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::7 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::8 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::9 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::10 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::11 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::12 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::13 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::14 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::15 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::16 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::17 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::18 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::19 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::20 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::21 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::22 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::23 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::24 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::25 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::26 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::27 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::28 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::29 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::30 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::31 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.wrQLenPdf::32 0 # What write queue length does an incoming req see
|
|
drivesys.physmem.totQLat 0 # Total cycles spent in queuing delays
|
|
drivesys.physmem.totMemAccLat 0 # Sum of mem lat for all requests
|
|
drivesys.physmem.totBusLat 0 # Total cycles spent in databus access
|
|
drivesys.physmem.totBankLat 0 # Total cycles spent in bank access
|
|
drivesys.physmem.avgQLat nan # Average queueing delay per request
|
|
drivesys.physmem.avgBankLat nan # Average bank access latency per request
|
|
drivesys.physmem.avgBusLat nan # Average bus latency per request
|
|
drivesys.physmem.avgMemAccLat nan # Average memory access latency
|
|
drivesys.physmem.avgRdBW 0.00 # Average achieved read bandwidth in MB/s
|
|
drivesys.physmem.avgWrBW 0.00 # Average achieved write bandwidth in MB/s
|
|
drivesys.physmem.avgConsumedRdBW 0.00 # Average consumed read bandwidth in MB/s
|
|
drivesys.physmem.avgConsumedWrBW 0.00 # Average consumed write bandwidth in MB/s
|
|
drivesys.physmem.peakBW 16000.00 # Theoretical peak bandwidth in MB/s
|
|
drivesys.physmem.busUtil 0.00 # Data bus utilization in percentage
|
|
drivesys.physmem.avgRdQLen 0.00 # Average read queue length over time
|
|
drivesys.physmem.avgWrQLen 0.00 # Average write queue length over time
|
|
drivesys.physmem.readRowHits 0 # Number of row buffer hits during reads
|
|
drivesys.physmem.writeRowHits 0 # Number of row buffer hits during writes
|
|
drivesys.physmem.readRowHitRate nan # Row buffer hit rate for reads
|
|
drivesys.physmem.writeRowHitRate nan # Row buffer hit rate for writes
|
|
drivesys.physmem.avgGap nan # Average gap between requests
|
|
drivesys.disk0.dma_read_full_pages 0 # Number of full page size DMA reads (not PRD).
|
|
drivesys.disk0.dma_read_bytes 0 # Number of bytes transfered via DMA reads (not PRD).
|
|
drivesys.disk0.dma_read_txs 0 # Number of DMA read transactions (not PRD).
|
|
drivesys.disk0.dma_write_full_pages 0 # Number of full page size DMA writes.
|
|
drivesys.disk0.dma_write_bytes 0 # Number of bytes transfered via DMA writes.
|
|
drivesys.disk0.dma_write_txs 0 # Number of DMA write transactions.
|
|
drivesys.disk2.dma_read_full_pages 0 # Number of full page size DMA reads (not PRD).
|
|
drivesys.disk2.dma_read_bytes 0 # Number of bytes transfered via DMA reads (not PRD).
|
|
drivesys.disk2.dma_read_txs 0 # Number of DMA read transactions (not PRD).
|
|
drivesys.disk2.dma_write_full_pages 0 # Number of full page size DMA writes.
|
|
drivesys.disk2.dma_write_bytes 0 # Number of bytes transfered via DMA writes.
|
|
drivesys.disk2.dma_write_txs 0 # Number of DMA write transactions.
|
|
drivesys.cpu.dtb.fetch_hits 0 # ITB hits
|
|
drivesys.cpu.dtb.fetch_misses 0 # ITB misses
|
|
drivesys.cpu.dtb.fetch_acv 0 # ITB acv
|
|
drivesys.cpu.dtb.fetch_accesses 0 # ITB accesses
|
|
drivesys.cpu.dtb.read_hits 7069 # DTB read hits
|
|
drivesys.cpu.dtb.read_misses 0 # DTB read misses
|
|
drivesys.cpu.dtb.read_acv 0 # DTB read access violations
|
|
drivesys.cpu.dtb.read_accesses 0 # DTB read accesses
|
|
drivesys.cpu.dtb.write_hits 3933 # DTB write hits
|
|
drivesys.cpu.dtb.write_misses 0 # DTB write misses
|
|
drivesys.cpu.dtb.write_acv 0 # DTB write access violations
|
|
drivesys.cpu.dtb.write_accesses 0 # DTB write accesses
|
|
drivesys.cpu.dtb.data_hits 11002 # DTB hits
|
|
drivesys.cpu.dtb.data_misses 0 # DTB misses
|
|
drivesys.cpu.dtb.data_acv 0 # DTB access violations
|
|
drivesys.cpu.dtb.data_accesses 0 # DTB accesses
|
|
drivesys.cpu.itb.fetch_hits 5992 # ITB hits
|
|
drivesys.cpu.itb.fetch_misses 0 # ITB misses
|
|
drivesys.cpu.itb.fetch_acv 0 # ITB acv
|
|
drivesys.cpu.itb.fetch_accesses 5992 # ITB accesses
|
|
drivesys.cpu.itb.read_hits 0 # DTB read hits
|
|
drivesys.cpu.itb.read_misses 0 # DTB read misses
|
|
drivesys.cpu.itb.read_acv 0 # DTB read access violations
|
|
drivesys.cpu.itb.read_accesses 0 # DTB read accesses
|
|
drivesys.cpu.itb.write_hits 0 # DTB write hits
|
|
drivesys.cpu.itb.write_misses 0 # DTB write misses
|
|
drivesys.cpu.itb.write_acv 0 # DTB write access violations
|
|
drivesys.cpu.itb.write_accesses 0 # DTB write accesses
|
|
drivesys.cpu.itb.data_hits 0 # DTB hits
|
|
drivesys.cpu.itb.data_misses 0 # DTB misses
|
|
drivesys.cpu.itb.data_acv 0 # DTB access violations
|
|
drivesys.cpu.itb.data_accesses 0 # DTB accesses
|
|
drivesys.cpu.numCycles 1628160 # number of cpu cycles simulated
|
|
drivesys.cpu.numWorkItemsStarted 0 # number of work items this cpu started
|
|
drivesys.cpu.numWorkItemsCompleted 0 # number of work items this cpu completed
|
|
drivesys.cpu.committedInsts 36152 # Number of instructions committed
|
|
drivesys.cpu.committedOps 36152 # Number of ops (including micro ops) committed
|
|
drivesys.cpu.num_int_alu_accesses 33516 # Number of integer alu accesses
|
|
drivesys.cpu.num_fp_alu_accesses 0 # Number of float alu accesses
|
|
drivesys.cpu.num_func_calls 2388 # number of times a function call or return occured
|
|
drivesys.cpu.num_conditional_control_insts 2347 # number of instructions that are conditional controls
|
|
drivesys.cpu.num_int_insts 33516 # number of integer instructions
|
|
drivesys.cpu.num_fp_insts 0 # number of float instructions
|
|
drivesys.cpu.num_int_register_reads 43772 # number of times the integer registers were read
|
|
drivesys.cpu.num_int_register_writes 26499 # number of times the integer registers were written
|
|
drivesys.cpu.num_fp_register_reads 0 # number of times the floating registers were read
|
|
drivesys.cpu.num_fp_register_writes 0 # number of times the floating registers were written
|
|
drivesys.cpu.num_mem_refs 11043 # number of memory refs
|
|
drivesys.cpu.num_load_insts 7109 # Number of load instructions
|
|
drivesys.cpu.num_store_insts 3934 # Number of store instructions
|
|
drivesys.cpu.num_idle_cycles 1592000.182518 # Number of idle cycles
|
|
drivesys.cpu.num_busy_cycles 36159.817482 # Number of busy cycles
|
|
drivesys.cpu.not_idle_fraction 0.022209 # Percentage of non-idle cycles
|
|
drivesys.cpu.idle_fraction 0.977791 # Percentage of idle cycles
|
|
drivesys.cpu.kern.inst.arm 0 # number of arm instructions executed
|
|
drivesys.cpu.kern.inst.quiesce 41 # number of quiesce instructions executed
|
|
drivesys.cpu.kern.inst.hwrei 295 # number of hwrei instructions executed
|
|
drivesys.cpu.kern.ipl_count::0 123 41.84% 41.84% # number of times we switched to this ipl
|
|
drivesys.cpu.kern.ipl_count::21 40 13.61% 55.44% # number of times we switched to this ipl
|
|
drivesys.cpu.kern.ipl_count::22 1 0.34% 55.78% # number of times we switched to this ipl
|
|
drivesys.cpu.kern.ipl_count::31 130 44.22% 100.00% # number of times we switched to this ipl
|
|
drivesys.cpu.kern.ipl_count::total 294 # number of times we switched to this ipl
|
|
drivesys.cpu.kern.ipl_good::0 123 42.86% 42.86% # number of times we switched to this ipl from a different ipl
|
|
drivesys.cpu.kern.ipl_good::21 40 13.94% 56.79% # number of times we switched to this ipl from a different ipl
|
|
drivesys.cpu.kern.ipl_good::22 1 0.35% 57.14% # number of times we switched to this ipl from a different ipl
|
|
drivesys.cpu.kern.ipl_good::31 123 42.86% 100.00% # number of times we switched to this ipl from a different ipl
|
|
drivesys.cpu.kern.ipl_good::total 287 # number of times we switched to this ipl from a different ipl
|
|
drivesys.cpu.kern.ipl_ticks::0 400769000 98.46% 98.46% # number of cycles we spent at this ipl
|
|
drivesys.cpu.kern.ipl_ticks::21 1620000 0.40% 98.86% # number of cycles we spent at this ipl
|
|
drivesys.cpu.kern.ipl_ticks::22 21500 0.01% 98.86% # number of cycles we spent at this ipl
|
|
drivesys.cpu.kern.ipl_ticks::31 4629500 1.14% 100.00% # number of cycles we spent at this ipl
|
|
drivesys.cpu.kern.ipl_ticks::total 407040000 # number of cycles we spent at this ipl
|
|
drivesys.cpu.kern.ipl_used::0 1 # fraction of swpipl calls that actually changed the ipl
|
|
drivesys.cpu.kern.ipl_used::21 1 # fraction of swpipl calls that actually changed the ipl
|
|
drivesys.cpu.kern.ipl_used::22 1 # fraction of swpipl calls that actually changed the ipl
|
|
drivesys.cpu.kern.ipl_used::31 0.946154 # fraction of swpipl calls that actually changed the ipl
|
|
drivesys.cpu.kern.ipl_used::total 0.976190 # fraction of swpipl calls that actually changed the ipl
|
|
drivesys.cpu.kern.callpal::swpipl 212 83.46% 83.46% # number of callpals executed
|
|
drivesys.cpu.kern.callpal::rdps 1 0.39% 83.86% # number of callpals executed
|
|
drivesys.cpu.kern.callpal::rti 41 16.14% 100.00% # number of callpals executed
|
|
drivesys.cpu.kern.callpal::total 254 # number of callpals executed
|
|
drivesys.cpu.kern.mode_switch::kernel 0 # number of protection mode switches
|
|
drivesys.cpu.kern.mode_switch::user 0 # number of protection mode switches
|
|
drivesys.cpu.kern.mode_switch::idle 41 # number of protection mode switches
|
|
drivesys.cpu.kern.mode_good::kernel 0
|
|
drivesys.cpu.kern.mode_good::user 0
|
|
drivesys.cpu.kern.mode_good::idle 0
|
|
drivesys.cpu.kern.mode_switch_good::kernel nan # fraction of useful protection mode switches
|
|
drivesys.cpu.kern.mode_switch_good::user nan # fraction of useful protection mode switches
|
|
drivesys.cpu.kern.mode_switch_good::idle 0 # fraction of useful protection mode switches
|
|
drivesys.cpu.kern.mode_switch_good::total 0 # fraction of useful protection mode switches
|
|
drivesys.cpu.kern.mode_ticks::kernel 0 # number of ticks spent at the given mode
|
|
drivesys.cpu.kern.mode_ticks::user 0 # number of ticks spent at the given mode
|
|
drivesys.cpu.kern.mode_ticks::idle 0 # number of ticks spent at the given mode
|
|
drivesys.cpu.kern.swap_context 0 # number of times the context was actually changed
|
|
drivesys.tsunami.ethernet.descDMAReads 4239 # Number of descriptors the device read w/ DMA
|
|
drivesys.tsunami.ethernet.descDMAWrites 0 # Number of descriptors the device wrote w/ DMA
|
|
drivesys.tsunami.ethernet.descDmaReadBytes 101736 # number of descriptor bytes read w/ DMA
|
|
drivesys.tsunami.ethernet.descDmaWriteBytes 0 # number of descriptor bytes write w/ DMA
|
|
drivesys.tsunami.ethernet.postedSwi 0 # number of software interrupts posted to CPU
|
|
drivesys.tsunami.ethernet.coalescedSwi 0 # average number of Swi's coalesced into each post
|
|
drivesys.tsunami.ethernet.totalSwi 0 # total number of Swi written to ISR
|
|
drivesys.tsunami.ethernet.postedRxIdle 0 # number of rxIdle interrupts posted to CPU
|
|
drivesys.tsunami.ethernet.coalescedRxIdle 0 # average number of RxIdle's coalesced into each post
|
|
drivesys.tsunami.ethernet.totalRxIdle 0 # total number of RxIdle written to ISR
|
|
drivesys.tsunami.ethernet.postedRxOk 0 # number of RxOk interrupts posted to CPU
|
|
drivesys.tsunami.ethernet.coalescedRxOk 0 # average number of RxOk's coalesced into each post
|
|
drivesys.tsunami.ethernet.totalRxOk 0 # total number of RxOk written to ISR
|
|
drivesys.tsunami.ethernet.postedRxDesc 0 # number of RxDesc interrupts posted to CPU
|
|
drivesys.tsunami.ethernet.coalescedRxDesc 0 # average number of RxDesc's coalesced into each post
|
|
drivesys.tsunami.ethernet.totalRxDesc 0 # total number of RxDesc written to ISR
|
|
drivesys.tsunami.ethernet.postedTxOk 0 # number of TxOk interrupts posted to CPU
|
|
drivesys.tsunami.ethernet.coalescedTxOk 0 # average number of TxOk's coalesced into each post
|
|
drivesys.tsunami.ethernet.totalTxOk 0 # total number of TxOk written to ISR
|
|
drivesys.tsunami.ethernet.postedTxIdle 40 # number of TxIdle interrupts posted to CPU
|
|
drivesys.tsunami.ethernet.coalescedTxIdle 1 # average number of TxIdle's coalesced into each post
|
|
drivesys.tsunami.ethernet.totalTxIdle 4239 # total number of TxIdle written to ISR
|
|
drivesys.tsunami.ethernet.postedTxDesc 0 # number of TxDesc interrupts posted to CPU
|
|
drivesys.tsunami.ethernet.coalescedTxDesc 0 # average number of TxDesc's coalesced into each post
|
|
drivesys.tsunami.ethernet.totalTxDesc 0 # total number of TxDesc written to ISR
|
|
drivesys.tsunami.ethernet.postedRxOrn 0 # number of RxOrn posted to CPU
|
|
drivesys.tsunami.ethernet.coalescedRxOrn 0 # average number of RxOrn's coalesced into each post
|
|
drivesys.tsunami.ethernet.totalRxOrn 0 # total number of RxOrn written to ISR
|
|
drivesys.tsunami.ethernet.coalescedTotal 1 # average number of interrupts coalesced into each post
|
|
drivesys.tsunami.ethernet.postedInterrupts 4239 # number of posts to CPU
|
|
drivesys.tsunami.ethernet.droppedPackets 0 # number of packets dropped
|
|
|
|
---------- End Simulation Statistics ----------
|