gem5/src/mem/bridge.cc
Nathan Binkert abc76f20cb Major changes to how SimObjects are created and initialized. Almost all
creation and initialization now happens in python.  Parameter objects
are generated and initialized by python.  The .ini file is now solely for
debugging purposes and is not used in construction of the objects in any
way.

--HG--
extra : convert_revision : 7e722873e417cb3d696f2e34c35ff488b7bff4ed
2007-07-23 21:51:38 -07:00

375 lines
12 KiB
C++

/*
* Copyright (c) 2006 The Regents of The University of Michigan
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met: redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer;
* redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution;
* neither the name of the copyright holders nor the names of its
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* Authors: Ali Saidi
* Steve Reinhardt
*/
/**
* @file
* Definition of a simple bus bridge without buffering.
*/
#include <algorithm>
#include "base/trace.hh"
#include "mem/bridge.hh"
#include "params/Bridge.hh"
Bridge::BridgePort::BridgePort(const std::string &_name,
Bridge *_bridge, BridgePort *_otherPort,
int _delay, int _nack_delay, int _req_limit,
int _resp_limit, bool fix_partial_write)
: Port(_name), bridge(_bridge), otherPort(_otherPort),
delay(_delay), nackDelay(_nack_delay), fixPartialWrite(fix_partial_write),
outstandingResponses(0), queuedRequests(0), inRetry(false),
reqQueueLimit(_req_limit), respQueueLimit(_resp_limit), sendEvent(this)
{
}
Bridge::Bridge(Params *p)
: MemObject(p->name),
portA(p->name + "-portA", this, &portB, p->delay, p->nack_delay,
p->req_size_a, p->resp_size_a, p->fix_partial_write_a),
portB(p->name + "-portB", this, &portA, p->delay, p->nack_delay,
p->req_size_b, p->resp_size_b, p->fix_partial_write_b),
ackWrites(p->write_ack), _params(p)
{
if (ackWrites)
panic("No support for acknowledging writes\n");
}
Port *
Bridge::getPort(const std::string &if_name, int idx)
{
BridgePort *port;
if (if_name == "side_a")
port = &portA;
else if (if_name == "side_b")
port = &portB;
else
return NULL;
if (port->getPeer() != NULL)
panic("bridge side %s already connected to.", if_name);
return port;
}
void
Bridge::init()
{
// Make sure that both sides are connected to.
if (portA.getPeer() == NULL || portB.getPeer() == NULL)
fatal("Both ports of bus bridge are not connected to a bus.\n");
if (portA.peerBlockSize() != portB.peerBlockSize())
fatal("Busses don't have the same block size... Not supported.\n");
}
bool
Bridge::BridgePort::respQueueFull()
{
assert(outstandingResponses >= 0 && outstandingResponses <= respQueueLimit);
return outstandingResponses >= respQueueLimit;
}
bool
Bridge::BridgePort::reqQueueFull()
{
assert(queuedRequests >= 0 && queuedRequests <= reqQueueLimit);
return queuedRequests >= reqQueueLimit;
}
/** Function called by the port when the bus is receiving a Timing
* transaction.*/
bool
Bridge::BridgePort::recvTiming(PacketPtr pkt)
{
if (!(pkt->flags & SNOOP_COMMIT))
return true;
DPRINTF(BusBridge, "recvTiming: src %d dest %d addr 0x%x\n",
pkt->getSrc(), pkt->getDest(), pkt->getAddr());
DPRINTF(BusBridge, "Local queue size: %d outreq: %d outresp: %d\n",
sendQueue.size(), queuedRequests, outstandingResponses);
DPRINTF(BusBridge, "Remove queue size: %d outreq: %d outresp: %d\n",
otherPort->sendQueue.size(), otherPort->queuedRequests,
otherPort->outstandingResponses);
if (pkt->isRequest() && otherPort->reqQueueFull() && pkt->result !=
Packet::Nacked) {
DPRINTF(BusBridge, "Remote queue full, nacking\n");
nackRequest(pkt);
return true;
}
if (pkt->needsResponse() && pkt->result != Packet::Nacked)
if (respQueueFull()) {
DPRINTF(BusBridge, "Local queue full, no space for response, nacking\n");
DPRINTF(BusBridge, "queue size: %d outreq: %d outstanding resp: %d\n",
sendQueue.size(), queuedRequests, outstandingResponses);
nackRequest(pkt);
return true;
} else {
DPRINTF(BusBridge, "Request Needs response, reserving space\n");
++outstandingResponses;
}
otherPort->queueForSendTiming(pkt);
return true;
}
void
Bridge::BridgePort::nackRequest(PacketPtr pkt)
{
// Nack the packet
pkt->result = Packet::Nacked;
pkt->setDest(pkt->getSrc());
//put it on the list to send
Tick readyTime = curTick + nackDelay;
PacketBuffer *buf = new PacketBuffer(pkt, readyTime, true);
// nothing on the list, add it and we're done
if (sendQueue.empty()) {
assert(!sendEvent.scheduled());
sendEvent.schedule(readyTime);
sendQueue.push_back(buf);
return;
}
assert(sendEvent.scheduled() || inRetry);
// does it go at the end?
if (readyTime >= sendQueue.back()->ready) {
sendQueue.push_back(buf);
return;
}
// ok, somewhere in the middle, fun
std::list<PacketBuffer*>::iterator i = sendQueue.begin();
std::list<PacketBuffer*>::iterator end = sendQueue.end();
std::list<PacketBuffer*>::iterator begin = sendQueue.begin();
bool done = false;
while (i != end && !done) {
if (readyTime < (*i)->ready) {
if (i == begin)
sendEvent.reschedule(readyTime);
sendQueue.insert(i,buf);
done = true;
}
i++;
}
assert(done);
}
void
Bridge::BridgePort::queueForSendTiming(PacketPtr pkt)
{
if (pkt->isResponse() || pkt->result == Packet::Nacked) {
// This is a response for a request we forwarded earlier. The
// corresponding PacketBuffer should be stored in the packet's
// senderState field.
PacketBuffer *buf = dynamic_cast<PacketBuffer*>(pkt->senderState);
assert(buf != NULL);
// set up new packet dest & senderState based on values saved
// from original request
buf->fixResponse(pkt);
// Check if this packet was expecting a response and it's a nacked
// packet, in which case we will never being seeing it
if (buf->expectResponse && pkt->result == Packet::Nacked)
--outstandingResponses;
DPRINTF(BusBridge, "response, new dest %d\n", pkt->getDest());
delete buf;
}
if (pkt->isRequest() && pkt->result != Packet::Nacked) {
++queuedRequests;
}
Tick readyTime = curTick + delay;
PacketBuffer *buf = new PacketBuffer(pkt, readyTime);
// If we're about to put this packet at the head of the queue, we
// need to schedule an event to do the transmit. Otherwise there
// should already be an event scheduled for sending the head
// packet.
if (sendQueue.empty()) {
sendEvent.schedule(readyTime);
}
sendQueue.push_back(buf);
}
void
Bridge::BridgePort::trySend()
{
assert(!sendQueue.empty());
PacketBuffer *buf = sendQueue.front();
assert(buf->ready <= curTick);
PacketPtr pkt = buf->pkt;
pkt->flags &= ~SNOOP_COMMIT; //CLear it if it was set
// Ugly! @todo When multilevel coherence works this will be removed
if (pkt->cmd == MemCmd::WriteInvalidateReq && fixPartialWrite &&
pkt->result != Packet::Nacked) {
PacketPtr funcPkt = new Packet(pkt->req, MemCmd::WriteReq,
Packet::Broadcast);
funcPkt->dataStatic(pkt->getPtr<uint8_t>());
sendFunctional(funcPkt);
pkt->cmd = MemCmd::WriteReq;
delete funcPkt;
}
DPRINTF(BusBridge, "trySend: origSrc %d dest %d addr 0x%x\n",
buf->origSrc, pkt->getDest(), pkt->getAddr());
bool wasReq = pkt->isRequest();
bool wasNacked = pkt->result == Packet::Nacked;
if (sendTiming(pkt)) {
// send successful
sendQueue.pop_front();
buf->pkt = NULL; // we no longer own packet, so it's not safe to look at it
if (buf->expectResponse) {
// Must wait for response
DPRINTF(BusBridge, " successful: awaiting response (%d)\n",
outstandingResponses);
} else {
// no response expected... deallocate packet buffer now.
DPRINTF(BusBridge, " successful: no response expected\n");
delete buf;
}
if (!wasNacked) {
if (wasReq)
--queuedRequests;
else
--outstandingResponses;
}
// If there are more packets to send, schedule event to try again.
if (!sendQueue.empty()) {
buf = sendQueue.front();
DPRINTF(BusBridge, "Scheduling next send\n");
sendEvent.schedule(std::max(buf->ready, curTick + 1));
}
} else {
DPRINTF(BusBridge, " unsuccessful\n");
inRetry = true;
}
DPRINTF(BusBridge, "trySend: queue size: %d outreq: %d outstanding resp: %d\n",
sendQueue.size(), queuedRequests, outstandingResponses);
}
void
Bridge::BridgePort::recvRetry()
{
inRetry = false;
Tick nextReady = sendQueue.front()->ready;
if (nextReady <= curTick)
trySend();
else
sendEvent.schedule(nextReady);
}
/** Function called by the port when the bus is receiving a Atomic
* transaction.*/
Tick
Bridge::BridgePort::recvAtomic(PacketPtr pkt)
{
// fix partial atomic writes... similar to the timing code that does the
// same... will be removed once our code gets this right
if (pkt->cmd == MemCmd::WriteInvalidateReq && fixPartialWrite) {
PacketPtr funcPkt = new Packet(pkt->req, MemCmd::WriteReq,
Packet::Broadcast);
funcPkt->dataStatic(pkt->getPtr<uint8_t>());
otherPort->sendFunctional(funcPkt);
delete funcPkt;
pkt->cmd = MemCmd::WriteReq;
}
return delay + otherPort->sendAtomic(pkt);
}
/** Function called by the port when the bus is receiving a Functional
* transaction.*/
void
Bridge::BridgePort::recvFunctional(PacketPtr pkt)
{
std::list<PacketBuffer*>::iterator i;
bool pktContinue = true;
for (i = sendQueue.begin(); i != sendQueue.end(); ++i) {
if (pkt->intersect((*i)->pkt)) {
pktContinue &= fixPacket(pkt, (*i)->pkt);
}
}
if (pktContinue) {
otherPort->sendFunctional(pkt);
}
}
/** Function called by the port when the bus is receiving a status change.*/
void
Bridge::BridgePort::recvStatusChange(Port::Status status)
{
otherPort->sendStatusChange(status);
}
void
Bridge::BridgePort::getDeviceAddressRanges(AddrRangeList &resp,
bool &snoop)
{
otherPort->getPeerAddressRanges(resp, snoop);
}
Bridge *
BridgeParams::create()
{
return new Bridge(this);
}