7aa67f42cb
This patch contains three fixes to max tick options handling in Options.py and Simulation.py: 1) Since the global simulator frequency isn't bound until m5.instantiate() is called, the maxtick resolution needs to happen after this call, since changes to the global frequency will cause m5.simulate() to misinterpret the maxtick value. Shuffling this also requires tweaking the checkpoint directory handling to signal the checkpoint restore tick back to run(). Fixing this completely and correctly will require storing the simulation frequency into checkpoints, which is beyond the scope of this patch. 2) The maxtick option in Options.py was defaulted to MaxTicks, so the old code would always skip over the maxtime part of the conditionals at the beginning of run(). Change the maxtick default to None, and set the maxtick local variable in run() appropriately. 3) To clarify whether max ticks settings are relative or absolute, split the maxtick option into separate options, for relative and absolute. Ensure that these two options and the maxtime option are handled appropriately to set the maxtick variable in Simulation.py.
244 lines
13 KiB
Python
244 lines
13 KiB
Python
# Copyright (c) 2013 ARM Limited
|
|
# All rights reserved.
|
|
#
|
|
# The license below extends only to copyright in the software and shall
|
|
# not be construed as granting a license to any other intellectual
|
|
# property including but not limited to intellectual property relating
|
|
# to a hardware implementation of the functionality of the software
|
|
# licensed hereunder. You may use the software subject to the license
|
|
# terms below provided that you ensure that this notice is replicated
|
|
# unmodified and in its entirety in all distributions of the software,
|
|
# modified or unmodified, in source code or in binary form.
|
|
#
|
|
# Copyright (c) 2006-2008 The Regents of The University of Michigan
|
|
# All rights reserved.
|
|
#
|
|
# Redistribution and use in source and binary forms, with or without
|
|
# modification, are permitted provided that the following conditions are
|
|
# met: redistributions of source code must retain the above copyright
|
|
# notice, this list of conditions and the following disclaimer;
|
|
# redistributions in binary form must reproduce the above copyright
|
|
# notice, this list of conditions and the following disclaimer in the
|
|
# documentation and/or other materials provided with the distribution;
|
|
# neither the name of the copyright holders nor the names of its
|
|
# contributors may be used to endorse or promote products derived from
|
|
# this software without specific prior written permission.
|
|
#
|
|
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
|
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
|
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
|
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
|
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
#
|
|
# Authors: Lisa Hsu
|
|
|
|
import m5
|
|
from m5.defines import buildEnv
|
|
from m5.objects import *
|
|
from Benchmarks import *
|
|
|
|
import CpuConfig
|
|
import MemConfig
|
|
|
|
def _listCpuTypes(option, opt, value, parser):
|
|
CpuConfig.print_cpu_list()
|
|
sys.exit(0)
|
|
|
|
def _listMemTypes(option, opt, value, parser):
|
|
MemConfig.print_mem_list()
|
|
sys.exit(0)
|
|
|
|
def addCommonOptions(parser):
|
|
# system options
|
|
parser.add_option("--list-cpu-types",
|
|
action="callback", callback=_listCpuTypes,
|
|
help="List available CPU types")
|
|
parser.add_option("--cpu-type", type="choice", default="atomic",
|
|
choices=CpuConfig.cpu_names(),
|
|
help = "type of cpu to run with")
|
|
parser.add_option("--checker", action="store_true");
|
|
parser.add_option("-n", "--num-cpus", type="int", default=1)
|
|
parser.add_option("--sys-clock", action="store", type="string",
|
|
default='1GHz',
|
|
help = """Top-level clock for blocks running at system
|
|
speed""")
|
|
parser.add_option("--cpu-clock", action="store", type="string",
|
|
default='2GHz',
|
|
help="Clock for blocks running at CPU speed")
|
|
parser.add_option("--smt", action="store_true", default=False,
|
|
help = """
|
|
Only used if multiple programs are specified. If true,
|
|
then the number of threads per cpu is same as the
|
|
number of programs.""")
|
|
|
|
# Memory Options
|
|
parser.add_option("--list-mem-types",
|
|
action="callback", callback=_listMemTypes,
|
|
help="List available memory types")
|
|
parser.add_option("--mem-type", type="choice", default="simple_mem",
|
|
choices=MemConfig.mem_names(),
|
|
help = "type of memory to use")
|
|
parser.add_option("--mem-size", action="store", type="string",
|
|
default="512MB",
|
|
help="Specify the physical memory size (single memory)")
|
|
|
|
# Cache Options
|
|
parser.add_option("--caches", action="store_true")
|
|
parser.add_option("--l2cache", action="store_true")
|
|
parser.add_option("--fastmem", action="store_true")
|
|
parser.add_option("--num-dirs", type="int", default=1)
|
|
parser.add_option("--num-l2caches", type="int", default=1)
|
|
parser.add_option("--num-l3caches", type="int", default=1)
|
|
parser.add_option("--l1d_size", type="string", default="64kB")
|
|
parser.add_option("--l1i_size", type="string", default="32kB")
|
|
parser.add_option("--l2_size", type="string", default="2MB")
|
|
parser.add_option("--l3_size", type="string", default="16MB")
|
|
parser.add_option("--l1d_assoc", type="int", default=2)
|
|
parser.add_option("--l1i_assoc", type="int", default=2)
|
|
parser.add_option("--l2_assoc", type="int", default=8)
|
|
parser.add_option("--l3_assoc", type="int", default=16)
|
|
parser.add_option("--cacheline_size", type="int", default=64)
|
|
|
|
# Enable Ruby
|
|
parser.add_option("--ruby", action="store_true")
|
|
|
|
# Run duration options
|
|
parser.add_option("-m", "--abs-max-tick", type="int", default=None,
|
|
metavar="TICKS", help="Run to absolute simulated tick " \
|
|
"specified including ticks from a restored checkpoint")
|
|
parser.add_option("--rel-max-tick", type="int", default=None,
|
|
metavar="TICKS", help="Simulate for specified number of" \
|
|
" ticks relative to the simulation start tick (e.g. if " \
|
|
"restoring a checkpoint)")
|
|
parser.add_option("--maxtime", type="float", default=None,
|
|
help="Run to the specified absolute simulated time in " \
|
|
"seconds")
|
|
parser.add_option("-I", "--maxinsts", action="store", type="int",
|
|
default=None, help="""Total number of instructions to
|
|
simulate (default: run forever)""")
|
|
parser.add_option("--work-item-id", action="store", type="int",
|
|
help="the specific work id for exit & checkpointing")
|
|
parser.add_option("--work-begin-cpu-id-exit", action="store", type="int",
|
|
help="exit when work starts on the specified cpu")
|
|
parser.add_option("--work-end-exit-count", action="store", type="int",
|
|
help="exit at specified work end count")
|
|
parser.add_option("--work-begin-exit-count", action="store", type="int",
|
|
help="exit at specified work begin count")
|
|
parser.add_option("--init-param", action="store", type="int", default=0,
|
|
help="""Parameter available in simulation with m5
|
|
initparam""")
|
|
|
|
# Simpoint options
|
|
parser.add_option("--simpoint-profile", action="store_true",
|
|
help="Enable basic block profiling for SimPoints")
|
|
parser.add_option("--simpoint-interval", type="int", default=10000000,
|
|
help="SimPoint interval in num of instructions")
|
|
|
|
# Checkpointing options
|
|
###Note that performing checkpointing via python script files will override
|
|
###checkpoint instructions built into binaries.
|
|
parser.add_option("--take-checkpoints", action="store", type="string",
|
|
help="<M,N> take checkpoints at tick M and every N ticks thereafter")
|
|
parser.add_option("--max-checkpoints", action="store", type="int",
|
|
help="the maximum number of checkpoints to drop", default=5)
|
|
parser.add_option("--checkpoint-dir", action="store", type="string",
|
|
help="Place all checkpoints in this absolute directory")
|
|
parser.add_option("-r", "--checkpoint-restore", action="store", type="int",
|
|
help="restore from checkpoint <N>")
|
|
parser.add_option("--checkpoint-at-end", action="store_true",
|
|
help="take a checkpoint at end of run")
|
|
parser.add_option("--work-begin-checkpoint-count", action="store", type="int",
|
|
help="checkpoint at specified work begin count")
|
|
parser.add_option("--work-end-checkpoint-count", action="store", type="int",
|
|
help="checkpoint at specified work end count")
|
|
parser.add_option("--work-cpus-checkpoint-count", action="store", type="int",
|
|
help="checkpoint and exit when active cpu count is reached")
|
|
parser.add_option("--restore-with-cpu", action="store", type="choice",
|
|
default="atomic", choices=CpuConfig.cpu_names(),
|
|
help = "cpu type for restoring from a checkpoint")
|
|
|
|
|
|
# CPU Switching - default switch model goes from a checkpoint
|
|
# to a timing simple CPU with caches to warm up, then to detailed CPU for
|
|
# data measurement
|
|
parser.add_option("--repeat-switch", action="store", type="int",
|
|
default=None,
|
|
help="switch back and forth between CPUs with period <N>")
|
|
parser.add_option("-s", "--standard-switch", action="store", type="int",
|
|
default=None,
|
|
help="switch from timing to Detailed CPU after warmup period of <N>")
|
|
parser.add_option("-p", "--prog-interval", type="str",
|
|
help="CPU Progress Interval")
|
|
|
|
# Fastforwarding and simpoint related materials
|
|
parser.add_option("-W", "--warmup-insts", action="store", type="int",
|
|
default=None,
|
|
help="Warmup period in total instructions (requires --standard-switch)")
|
|
parser.add_option("--bench", action="store", type="string", default=None,
|
|
help="base names for --take-checkpoint and --checkpoint-restore")
|
|
parser.add_option("-F", "--fast-forward", action="store", type="string",
|
|
default=None,
|
|
help="Number of instructions to fast forward before switching")
|
|
parser.add_option("-S", "--simpoint", action="store_true", default=False,
|
|
help="""Use workload simpoints as an instruction offset for
|
|
--checkpoint-restore or --take-checkpoint.""")
|
|
parser.add_option("--at-instruction", action="store_true", default=False,
|
|
help="""Treat value of --checkpoint-restore or --take-checkpoint as a
|
|
number of instructions.""")
|
|
|
|
def addSEOptions(parser):
|
|
# Benchmark options
|
|
parser.add_option("-c", "--cmd", default="",
|
|
help="The binary to run in syscall emulation mode.")
|
|
parser.add_option("-o", "--options", default="",
|
|
help="""The options to pass to the binary, use " "
|
|
around the entire string""")
|
|
parser.add_option("-i", "--input", default="",
|
|
help="Read stdin from a file.")
|
|
parser.add_option("--output", default="",
|
|
help="Redirect stdout to a file.")
|
|
parser.add_option("--errout", default="",
|
|
help="Redirect stderr to a file.")
|
|
|
|
def addFSOptions(parser):
|
|
# Simulation options
|
|
parser.add_option("--timesync", action="store_true",
|
|
help="Prevent simulated time from getting ahead of real time")
|
|
|
|
# System options
|
|
parser.add_option("--kernel", action="store", type="string")
|
|
parser.add_option("--script", action="store", type="string")
|
|
parser.add_option("--frame-capture", action="store_true",
|
|
help="Stores changed frame buffers from the VNC server to compressed "\
|
|
"files in the gem5 output directory")
|
|
|
|
if buildEnv['TARGET_ISA'] == "arm":
|
|
parser.add_option("--bare-metal", action="store_true",
|
|
help="Provide the raw system without the linux specific bits")
|
|
parser.add_option("--machine-type", action="store", type="choice",
|
|
choices=ArmMachineType.map.keys(), default="RealView_PBX")
|
|
parser.add_option("--dtb-filename", action="store", type="string",
|
|
help="Specifies device tree blob file to use with device-tree-"\
|
|
"enabled kernels")
|
|
# Benchmark options
|
|
parser.add_option("--dual", action="store_true",
|
|
help="Simulate two systems attached with an ethernet link")
|
|
parser.add_option("-b", "--benchmark", action="store", type="string",
|
|
dest="benchmark",
|
|
help="Specify the benchmark to run. Available benchmarks: %s"\
|
|
% DefinedBenchmarks)
|
|
|
|
# Metafile options
|
|
parser.add_option("--etherdump", action="store", type="string", dest="etherdump",
|
|
help="Specify the filename to dump a pcap capture of the" \
|
|
"ethernet traffic")
|
|
|
|
# Disk Image Options
|
|
parser.add_option("--disk-image", action="store", type="string", default=None,
|
|
help="Path to the disk image to use.")
|