Commit graph

96 commits

Author SHA1 Message Date
Andreas Hansson
55cf3f4ac1 MEM: Removing the default port peer from Python ports
In preparation for the introduction of Master and Slave ports, this
patch removes the default port parameter in the Python port and thus
forces the argument list of the Port to contain only the
description. The drawback at this point is that the config port and
dma port of PCI and DMA devices have to be connected explicitly. This
is key for future diversification as the pio and config port are
slaves, but the dma port is a master.
2012-01-17 12:55:09 -06:00
Andreas Hansson
2208ea049f MEM: Make the bus bridge unidirectional and fixed address range
This patch makes the bus bridge uni-directional and specialises the
bus ports to be a master port and a slave port. This greatly
simplifies the assumptions on both sides as either port only has to
deal with requests or responses. The following patches introduce the
notion of master and slave ports, and would not be possible without
this split of responsibilities.

In making the bridge unidirectional, the address range mechanism of
the bridge is also changed. For the cases where communication is
taking place both ways, an additional bridge is needed. This causes
issues with the existing mechanism, as the busses cannot determine
when to stop iterating the address updates from the two bridges. To
avoid this issue, and also greatly simplify the specification, the
bridge now has a fixed set of address ranges, specified at creation
time.
2012-01-17 12:55:09 -06:00
Andreas Hansson
f85286b3de MEM: Add port proxies instead of non-structural ports
Port proxies are used to replace non-structural ports, and thus enable
all ports in the system to correspond to a structural entity. This has
the advantage of accessing memory through the normal memory subsystem
and thus allowing any constellation of distributed memories, address
maps, etc. Most accesses are done through the "system port" that is
used for loading binaries, debugging etc. For the entities that belong
to the CPU, e.g. threads and thread contexts, they wrap the CPU data
port in a port proxy.

The following replacements are made:
FunctionalPort      > PortProxy
TranslatingPort     > SETranslatingPortProxy
VirtualPort         > FSTranslatingPortProxy

--HG--
rename : src/mem/vport.cc => src/mem/fs_translating_port_proxy.cc
rename : src/mem/vport.hh => src/mem/fs_translating_port_proxy.hh
rename : src/mem/translating_port.cc => src/mem/se_translating_port_proxy.cc
rename : src/mem/translating_port.hh => src/mem/se_translating_port_proxy.hh
2012-01-17 12:55:08 -06:00
Ali Saidi
bcb71963eb ARM: Add support for running multiple systems 2012-01-09 18:08:20 -06:00
Anthony Gutierrez
19e65a6502 ARM: Update config files for Android/BBench images available on website.
--HG--
extra : rebase_source : ca98021c3f96422374fbd4500da312a5a9dd00df
2011-12-15 00:43:35 -05:00
Ali Saidi
f2bfef90c4 ARM: Fix small bug in config script that prevents android from booting 2011-10-19 18:08:31 -05:00
Ali Saidi
ba265abbfd ARM: Add some MP regressions and clean up the disk images and kernels a bit 2011-08-19 15:08:09 -05:00
Ali Saidi
2fd2b44b86 ARM: Add VExpress_E support with PCIe to gem5 2011-08-19 15:08:08 -05:00
Ali Saidi
d2a0a2ec22 ARM: Add support for Versatile Express boards 2011-08-19 15:08:08 -05:00
Steve Reinhardt
19bb896bfe config: revamp x86 config to avoid appending to SimObjectVectors
A significant contributor to the need for adoptOrphanParams()
is the practice of appending to SimObjectVectors which have
already been assigned as children.  This practice sidesteps the
assignment operation for those appended SimObjects, which is
where parent/child relationships are typically established.

This patch reworks the config scripts that use append() on
SimObjectVectors, which all happen to be in the x86 system
configuration.  At some point in the future, I hope to make
SimObjectVectors immutable (by deriving from tuple rather than
list), at which time this patch will be necessary for correct
operation.  For now, it just avoids some of the warning
messages that get printed in adoptOrphanParams().
2011-05-23 14:29:23 -07:00
Ali Saidi
cefd6960e5 ARM: Configure bootloader parameters 2011-05-04 20:38:28 -05:00
Ali Saidi
d6289507d8 ARM: Include IDE/CF controller by default in PBX model.
Frame buffer and boot linux:
./build/ARM_FS/m5.opt configs/example/fs.py --benchmark=ArmLinuxFrameBuf --kernel=vmlinux.touchkit
Linux from a CF card:
./build/ARM_FS/m5.opt configs/example/fs.py --benchmark=ArmLinuxCflash --kernel=vmlinux.touchkit
Run Android
./build/ARM_FS/m5.opt configs/example/fs.py --benchmark=ArmAndroid --kernel=vmlinux.android
Run MP
./build/ARM_FS/m5.opt configs/example/fs.py --benchmark=ArmLinuxCflash --kernel=vmlinux.mp-2.6.38
2011-04-04 11:42:31 -05:00
Ali Saidi
887e9e2b99 ARM: Bare metal system should have 256MB of RAM. 2011-03-17 19:20:20 -05:00
Ali Saidi
79dac89552 ARM: Clarifies creation of Linux and baremetal ARM systems.
makeArmSystem creates both bare-metal and Linux systems more cleanly.
machine_type was never optional though listed as an optional argument; a system
such as "RealView_PBX" must now be explicitly specified.  Now that it is a
required argument, the placement of the arguments has changed slightly
requiring some changes to calls that create ARM systems.
2011-02-23 15:10:48 -06:00
Ali Saidi
d33c1d9592 VNC: Add VNC server to M5 2011-02-11 18:29:35 -06:00
Brad Beckmann
6ebd7c390b config: fixed minor bug connecting dma devices to ruby 2011-02-08 15:52:44 -08:00
Gabe Black
f8fc0419c5 X86, Config: Move the setting of work count options to a separate function.
This way things that don't care about work count options and/or aren't called
by something that has those command line options set up doesn't have to build
a fake object to carry in inert values.
2011-02-07 01:22:15 -08:00
Brad Beckmann
dfa8cbeb06 m5: added work completed monitoring support 2011-02-06 22:14:19 -08:00
Brad Beckmann
17b4ef52bb ruby: x86 fs config support 2011-02-06 22:14:18 -08:00
Gabe Black
c4b81d311e X86: Change how the default disk image gets set up.
The disk image to use was always being forced to a particular value. This
change changes what disk image is selected as the default based on the
architecture being built. In the future, a more sophisticated system might be
used that selected a path based on certain rules instead of relying on one off
file names.
2011-02-02 18:03:58 -08:00
Ali Saidi
d7b8efa0df ARM: Add support for a dumb IDE controller 2010-11-15 14:04:03 -06:00
Ali Saidi
c779af4e12 Mem: Finish half-baked support for mmaping file in physmem.
Physmem has a parameter to be able to mem map a file, however
it isn't actually used. This changeset utilizes the parameter
so a file can be mmapped.
2010-11-08 13:58:24 -06:00
Brad Beckmann
8572d8fd91 config: fixed ruby dma device connections 2010-08-24 13:20:31 -07:00
Ali Saidi
330fada1aa ARM: Add configuration for Linux/Full System 2010-08-23 11:18:40 -05:00
Nathan Binkert
90820ddf02 config: fix assertion for x86 in FSConfig.py 2010-04-18 21:33:59 -07:00
Brad Beckmann
d8e1e5abd0 ruby: fixed how ruby_fs creates phsyical memory
Now ruby_fs creates physical memory of the right size.
2010-03-21 21:22:20 -07:00
Brad Beckmann
ce2d13195b ruby: FS support using the new configuration system 2010-01-29 20:29:21 -08:00
Gabe Black
93d89b288f X86: Record the memory mode when building an X86 system. 2009-12-19 01:49:34 -08:00
Brad Beckmann
3cf24f9716 ruby: Support for merging ALPHA_FS and ruby
Connects M5 cpu and dma ports directly to ruby sequencers and dma
sequencers.  Rubymem also includes a pio port so that pio requests
and be forwarded to a special pio bus connecting to device pio
ports.
2009-11-18 13:55:58 -08:00
Nathan Binkert
9a8cb7db7e python: Move more code into m5.util allow SCons to use that code.
Get rid of misc.py and just stick misc things in __init__.py
Move utility functions out of SCons files and into m5.util
Move utility type stuff from m5/__init__.py to m5/util/__init__.py
Remove buildEnv from m5 and allow access only from m5.defines
Rename AddToPath to addToPath while we're moving it to m5.util
Rename read_command to readCommand while we're moving it
Rename compare_versions to compareVersions while we're moving it.

--HG--
rename : src/python/m5/convert.py => src/python/m5/util/convert.py
rename : src/python/m5/smartdict.py => src/python/m5/util/smartdict.py
2009-09-22 15:24:16 -07:00
Gabe Black
8d84f81e70 X86, Config: Make makeX86System consider the number of CPUs, and clean up interrupt assignment. 2009-04-26 02:04:32 -07:00
Steve Reinhardt
6629d9b2bc mem: use single BadAddr responder per system.
Previously there was one per bus, which caused some coherence problems
when more than one decided to respond.  Now there is just one on
the main memory bus.  The default bus responder on all other buses
is now the downstream cache's cpu_side port.  Caches no longer need
to do address range filtering; instead, we just have a simple flag
to prevent snoops from propagating to the I/O bus.
2008-07-16 11:10:33 -07:00
Gabe Black
b8333a5155 X86: Actually put the PCI INTA entry into the MP tables. 2009-04-19 04:15:18 -07:00
Gabe Black
25e223c30f X86: Make E820 report nice, round (and correct) numbers. 2009-04-19 04:14:48 -07:00
Gabe Black
06d25dcd26 X86: Automatically make the IO APIC in an N CPU system have id N+1. 2009-04-19 02:39:19 -07:00
Gabe Black
eafdf00eb3 X86: Add IRQ4 to the Intel MP tables. 2009-02-25 10:19:06 -08:00
Gabe Black
1c5b9773bd X86: Find the natural lpj for this configuration. 2009-02-01 00:29:07 -08:00
Gabe Black
a5ed1590bd X86: Add a root device to the kernel command line. 2009-02-01 00:27:49 -08:00
Gabe Black
70cd5bfce5 X86: Configure the first PCI interrupt. 2009-02-01 00:26:10 -08:00
Gabe Black
18f6c18323 X86: Hook in a hard drive image. 2009-02-01 00:24:26 -08:00
Gabe Black
01679bb416 X86: Take out the IDE noprobe kernel arguments. 2009-02-01 00:20:44 -08:00
Gabe Black
bb7ad80bbe X86: Plug in an IDE controller. 2009-02-01 00:00:03 -08:00
Gabe Black
d08b8e2b82 X86: Add some interrupt info to the intel MP tables. 2009-01-31 23:43:09 -08:00
Gabe Black
7b7a92d3f4 X86: Prevent Linux for probing for non-existant IDE controllers. 2009-01-25 20:36:24 -08:00
Gabe Black
ff29e00112 X86: Add entries for the IO APIC to the MP table. 2008-10-11 16:12:34 -07:00
Gabe Black
526933e5d0 X86: Add an Intel MP table to the simulation. 2008-10-11 15:14:37 -07:00
Gabe Black
3af428606a X86: Rename the PC device to Pc.
--HG--
rename : src/dev/x86/PC.py => src/dev/x86/Pc.py
2008-10-11 02:23:40 -07:00
Gabe Black
ec0fb05d64 X86: Turn SMBios structures into simobjects. 2008-10-10 03:50:51 -07:00
Gabe Black
b4dab225fd X86: Split makeLinuxX86System into makeLinuxX86System and makeX86System. 2008-10-10 03:50:30 -07:00
Nathan Binkert
00df9016fe Rename SimConsole to Terminal since it makes more sense
--HG--
rename : src/dev/SimConsole.py => src/dev/Terminal.py
rename : src/dev/simconsole.cc => src/dev/terminal.cc
rename : src/dev/simconsole.hh => src/dev/terminal.hh
2008-06-17 20:29:06 -07:00