to add new devices. Abstract the Platform more so that
it is unnecessary to know know platform specifics for
interrupting or translating PCI DMA addresses.
dev/ide_ctrl.cc:
convert to parameter struct for initialization
use the interrupt functions in the PciDev base class
convert from tsunami to using platform
We don't need an interrupt controller here.
dev/ide_ctrl.hh:
don't use Tsunami, use Platform
make the IdeDisk a friend so that it can access my plaform
convert to parameter struct for construction
dev/ide_disk.cc:
don't use tsunami references, but platform references
dev/ns_gige.cc:
Convert to parameter struct for initialzation. Use code in
base class for interrupts so we don't need to know anything
about the platform. Don't need an IntrControl *.
dev/ns_gige.hh:
We don't need a Tsunami * anymore
convert to a parameter struct for construction
dev/pcidev.cc:
deal with new parameter struct
dev/pcidev.hh:
- Move all of the configuration parameters into a param struct
that we can pass into the constructor.
- Add a Platform * for accessing new generic interrupt post/clear
and dma address translation fuctions
- Create functions for posting/clearing interrupts and translating
dma addresses
dev/platform.cc:
have default functions that panic on pci calls
dev/platform.hh:
don't make the pci stuff pure virtual, but rather provide
default implementations that panic. Also, add dma address
translation.
dev/tsunami.cc:
this-> isn't necessary here.
add pci address translation
dev/tsunami.hh:
implement the pciToDma address translation
--HG--
extra : convert_revision : 7db27a2fa1f1bd84704921ec7ca0280b5653c43e
base/traceflags.py:
removed TsunamiUart/TlaserUart and added a plain Uart
dev/alpha_console.cc:
updated for new simconsole
dev/platform.hh:
added a uart member to platform
dev/simconsole.cc:
dev/simconsole.hh:
removed lots of legacy code, it should all be ours now.
converted tabs to 8 spaces
added our copyright
dev/tsunami.cc:
uses simconsole.hh rather than console.hh
dev/tsunami_cchip.cc:
dev/tsunami_io.cc:
never needed console.hh
dev/tsunami_io.hh:
this does need eventq.hh and it just happend to be working whenn console.hh was
included everywhere
dev/tsunamireg.h:
added a couple more 8250/16550 uart defines
dev/uart.cc:
new uart code, rewritten to support both tlaser and tsunami (both a 8250 and 8530
uart).
dev/uart.hh:
updated for new uart, legacy code removed
--HG--
rename : dev/console.cc => dev/simconsole.cc
rename : dev/console.hh => dev/simconsole.hh
rename : dev/tsunami_uart.cc => dev/uart.cc
rename : dev/tsunami_uart.hh => dev/uart.hh
extra : convert_revision : e663352d49d4c2d3c95643030cf73c0e85ba2f08
virtual function in alphaaccess.cc
dev/alpha_console.cc:
dev/alpha_console.hh:
dev/platform.hh:
dev/tsunami.cc:
dev/tsunami.hh:
dev/tsunami_io.hh:
Removed dynamic cast to get interrupt frequency and replaced with a
virtual function
--HG--
extra : convert_revision : 01f514a33d8f76c6527ab25a713d5c86f9fd646e
dev/console.cc:
commented out code that checks if an interrupt is happening before issuing one
because they can get lost when linux boots
dev/console.hh:
added a setPlatform function to set the platform to interrupt
dev/platform.hh:
dev/tsunami.cc:
dev/tsunami.hh:
Added virtual functions to post console interrupts
dev/tsunami_io.cc:
allowed a 64bit read of the PIC since we can't do a physical byte read
dev/tsunami_uart.cc:
moved TsunamiUart to PioDevice
various little fixes to make linux work
dev/tsunami_uart.hh:
Made Tsunami_Uart a PIO device
dev/tsunamireg.h:
added some UART defines and used the ULL macros
kern/linux/linux_system.cc:
commented out waiting for gdb
--HG--
extra : convert_revision : 8cfd0700f3812ab349a6d7f132f85f4f421c5c5e
Turbolaser)
base/range.hh:
Change semantics of range to be inclusive of the end value, may need to
check other users of range to make sure they are semantically correct.
This was needed for access of last byte in range of address on IDE and
makes sense for case of range from 0 to all f
dev/ide_ctrl.cc:
dev/ide_ctrl.hh:
dev/ide_disk.cc:
dev/ide_disk.hh:
Whole mess of changes.. at current state simulator will boot and read
partition table and then have a bunch of errors and panic
dev/pciconfigall.cc:
dev/pciconfigall.hh:
dev/platform.hh:
Changes to work with platform separation
dev/tsunami.cc:
dev/tsunami.hh:
Change to work with platform separation
--HG--
extra : convert_revision : e1de22b54df7fdcf391efc2a8555ada93f46beab
dev/tsunami.cc:
Changed so Tsunami has a pointer to the System to which it belongs.
Now it is derived from generic base class Platform so platform stuff
can be accessed based on the system
dev/tsunami_io.cc:
dev/tsunami_io.hh:
Cleanup and added copyright
kern/linux/linux_system.cc:
kern/linux/linux_system.hh:
Added event to skip the "calibrate_delay" function, now calculate
loops_per_jiffy based on frequency, interrupt frequency, and constant
sim/system.hh:
Added pointer to generic Platform base class
--HG--
extra : convert_revision : 5bd925eec220a2ca48eb6164d2ecfdec96922c2c
dev/pciconfigall.cc:
dev/pciconfigall.hh:
dev/pcidev.cc:
dev/pcidev.hh:
dev/tsunami.cc:
dev/tsunami.hh:
A bunch of changes to clean up new PCI code and to fix build
--HG--
extra : convert_revision : 71063bcc565c50fc293b323ddce2c8e701f544ff
dev/tsunami.cc:
dev/tsunami.hh:
Change to use AdaptecController with Tsunami
--HG--
extra : convert_revision : 6ff4f9f7ae1959589340b2ab23755b4dbfec4dbc
dev/alpha_access.h:
removed my attempted hack to get console compling in linux
dev/tsunami.cc:
dev/tsunami.hh:
added pchip pointer to tsunami
dev/tsunami_cchip.cc:
made printing better
dev/tsunami_cchip.hh:
commented out back pointer for now, since the parser has issues with it
dev/tsunamireg.h:
added pchip registers
--HG--
extra : convert_revision : b4fceb7d08e757d9aaf37df8eb1bcd5ae29ce0da
