In this way a MemoryObject can keep a functional port around and give it to anyone who wants to do functional accesses rather
than creating a new one each time.
src/mem/bus.cc:
src/mem/bus.hh:
src/mem/cache/cache_impl.hh:
only keep around one func port we give to anyone who wants it. Otherwise we can run out of port ids reasonably quickly if
a lot of functional accesses are happening (e.g. remote debugging, dprintk, etc)
--HG--
extra : convert_revision : 6a9e3e96f51cedaab6de1b36cf317203899a3716
src/cpu/o3/fetch.hh:
src/cpu/o3/fetch_impl.hh:
Update code so that the O3 CPU can handle not initially having anything hooked up to its ports.
--HG--
extra : convert_revision : 04bcef44e754735d821509ebd69b0ef9c8ef8e2c
into zamp.eecs.umich.edu:/z/ktlim2/clean/tmp/clean2
src/cpu/base_dyn_inst.hh:
Hand merge. Line is no longer needed because it's handled in the ISA.
--HG--
extra : convert_revision : 0be4067aa38759a5631c6940f0167d48fde2b680
1. Move interrupt handling to a separate function to clean up main commit() function a bit. Also gate the function call off properly based on whether or not there are outstanding interrupts, and the system is not in PAL mode.
2. Better handling of updating instruction's status bits. Instructions are not marked "atCommit" until other stages view it (pushed off to IEW/IQ), and they have been properly handled (faults).
3. Don't consider the ROB "empty" for the purpose of other stages until the ROB is empty, all stores have written back, and there was no store commits this cycle. The last is necessary in case a store committed, in which case it would look like all stores have written back but in actuality have not.
src/cpu/o3/commit.hh:
Slightly modify how interrupts are handled. Also include some extra bools to keep track of state properly.
src/cpu/o3/commit_impl.hh:
Slightly modify how interrupts are handled. Also include some extra bools to keep track of state.
General correctness updates, most specifically for when commit broadcasts to other stages that the ROB is empty.
--HG--
extra : convert_revision : 682ec6ccf4ee6ed0c8a030ceaba1c90a3619d102
1. Update packet's flags properly when a snoop happens
2. Don't allow accesses to read a block's data if the block has outstanding MSHRs. This avoids a RAW hazard in MP systems that the memory system was not detecting properly earlier (a write required a block to upgrade, and while the upgrade was outstanding, a read came along and read old data).
3. Update MSHR's request upon a response being handled. If the MSHR has more targets than it can respond to in one cycle, then its request must be properly updated to the new head of the targets list.
src/mem/bus.cc:
Update packet's flags properly upon snoop.
src/mem/cache/cache_impl.hh:
Be sure to not allow accesses to a block with outstanding MSHRs.
src/mem/cache/miss/miss_queue.cc:
Update MSHR's request upon a response being handled.
--HG--
extra : convert_revision : 76a9abc610ca3f1904f075ad21637148a41982d6
src/cpu/o3/iew_impl.hh:
Allow for slightly more flexible handling of non-speculative instructions. They can be other classes now, such as loads or stores.
Also be sure to clear the state associated with squashes that are not used. i.e. if a squash due to a memory ordering violation happens on the same cycle as an older branch squashing, clear the state associated with the memory ordering violation.
Lastly don't consider uncached loads to officially be "at commit" until IEW receives the signal back from commit about the load.
src/cpu/o3/inst_queue_impl.hh:
Don't consider non-speculative instructions to be "at commit" until the IQ has received a signal from commit about the instruction. This prevents non-speculative instructions from being issued too early.
src/cpu/o3/mem_dep_unit_impl.hh:
Clear instruction's ability to issue if it's replayed.
--HG--
extra : convert_revision : d69dae878a30821222885485f4dee87170d56eb3
1. Requests are handled more properly now. They assume the memory system takes control of the request upon sending out an access.
2. load-load ordering is maintained.
src/cpu/base_dyn_inst.hh:
Update how requests are handled. The BaseDynInst should not be able to hold a pointer to the request because the request becomes owned by the memory system once it is sent out.
Also include some functions to allow certain status bits to be cleared.
src/cpu/base_dyn_inst_impl.hh:
Update how requests are handled. The BaseDynInst should not be able to hold a pointer to the request because the request becomes owned by the memory system once it is sent out.
src/cpu/o3/fetch_impl.hh:
General correctness fixes. retryPkt is not necessarily always set, so handle it properly. Also consider the cache unblocked only when recvRetry is called.
src/cpu/o3/lsq_unit.hh:
Handle requests a little more correctly. Now that the requests aren't pointed to by the DynInst, be sure to delete the request if it's not being used by the memory system.
Also be sure to not store-load forward from an uncacheable store.
src/cpu/o3/lsq_unit_impl.hh:
Check to make sure load-load ordering was maintained.
Also handle requests a little more correctly.
--HG--
extra : convert_revision : e86bead2886d02443cf77bf7a7a1492845e1690f
1. Set CPU ID in all modes for the O3 CPU.
2. Use nextCycle() function to prevent phase drift in O3 CPU.
3. Remove assertion in rename map that is no longer true.
src/cpu/o3/alpha/cpu_builder.cc:
Allow for CPU id in all modes, not just full system. Also include a parameter that was left out by accident.
src/cpu/o3/alpha/cpu_impl.hh:
Set the CPU ID properly.
src/cpu/o3/cpu.cc:
src/cpu/o3/cpu.hh:
Use nextCycle() function so that the CPU does not get out of phase when starting up from quiesces.
src/cpu/o3/rename_map.cc:
Remove assertion that is no longer true.
tests/configs/o3-timing.py:
Set CPU's id to 0.
--HG--
extra : convert_revision : 2b69c19adfce2adcc2d1939e89d702bd6674d5d5
src/dev/i8254xGBe.cc:
src/dev/i8254xGBe.hh:
src/dev/i8254xGBe_defs.hh:
finish coding the Intel Gb NIC device
src/dev/io_device.hh:
we really don't want to be able to pass a null buffer to dma read, at least not the way we have things setup now... it won't work at all
--HG--
extra : convert_revision : 6739497232317ec407cfa7a96de4575a9a6cfc46
