The m5ops assembly library contains a lot of repetitive code. This
changeset adds two macros, FOREACH_M5OP and FOREACH_M5_ANNOTATION, to
m5ops.h that simplify architecture-specific implementations. The ARM
and ARMv8 m5op implementations have been updated to use the new
macros.
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
The old style guide used to mandate 78 characters as the maximum line
length to accommodate traditional diffs on 80-column terminals. This
is an uncommon use case and it has therefore been decided (see email
thread on gem5-dev [1]) that a maximum length of 79-characters makes
more sense.
[1] http://comments.gmane.org/gmane.comp.emulators.m5.devel/29789
Signed-off-by: Andreas Sandberg <aandreas.sandberg@arm.com>
Reviewed-by: Brandon Potter <brandon.potter@amd.com>
--HG--
rename : util/style.py => util/hgstyle.py
extra : rebase_source : 63efcc4da2585ef8c323d6f322736f64d71742f8
The current style checker script, hgstyle.py, assumes that it is being
run from Mercurial. This means that it depends on the Mercurial Python
libraries, which aren't necessarily present if using git. This
changeset adds a new style checker script, style.py, that has
been designed to be run from the command line.
The script has support for detecting which revision control system is
used and is able to query both git and Mercurial for changes. This
enables the script to operate on modified regions and/or all of the
modified files in the repository.
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-by: Steve Reinhardt <steve.reinhardt@amd.com>
--HG--
extra : rebase_source : 2b420aff79d190f32557bc8822518cbc5d93e999
Add a git pre-commit hook that verifies that files that are about to
be committed. Since git stages changes into an index and the index
contains the changes that will be committed, the style checker only
looks at the state of files in the index.
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-by: Steve Reinhardt <steve.reinhardt@amd.com>
--HG--
extra : rebase_source : 22a028bf13524cba188bd7896a0304f4c14ffeeb
Add an AbstractRepo class and implementations for git and Mercurial
that provide a common interface to query repository status for style
checkers. The class defines the interfaces to list modified files that
are about to be committed and methods to identify changed regions.
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-by: Steve Reinhardt <steve.reinhardt@amd.com>
--HG--
rename : util/style.py => util/hgstyle.py
extra : rebase_source : da1f482a1ecac2b0be437dc400b4a66bd3b301cc
Style validators provide a subset of the style verifier functionality
and are only exposed through the "hg m5format" command. This
functionality seems to be both redundant and unused.
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
--HG--
extra : rebase_source : f4847ac3ddc86f6684565b65a942e04979972a7b
Add a style checker that verifies that source code doesn't contain
non-printable (control) characters. The only allowed control
characters are:
* 0x0a / \n: New line
* 0x09 / \t: Tab (the whitespace checker enforces no-tabs for C/C++ files)
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Brandon Potter <brandon.potter@amd.com>
--HG--
extra : rebase_source : 9ba3e2971774a7b3d73cda34bbee1f19c4add746
Refactor the style checker into a Python module that can be reused by
command line tools that integrate with git. In particular:
* Create a style package in util
* Move style validators from style.py to the style/validators.py.
* Move style verifiers from style.py to the style/verifiers.py.
* Move utility functions (sort_includes, region handling,
file_types) into the style package
* Move generic code from style.py to style/style.py.
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-by: Steve Reinhardt <steve.reinhardt@amd.com>
--HG--
rename : util/style.py => util/hgstyle.py
rename : util/sort_includes.py => util/style/sort_includes.py
extra : rebase_source : ad6cf9b9a18c48350dfc7b7c77bea6c5344fb53c
The include sorter class normally yields one string per line and
relies on the caller to merge lines into a block of text separated by
newlines. However, there are cases when this isn't true. This makes
diffing using Python's difflib hard. This changeset updates the
include sorter to never do this and always yield one line at a time.
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-by: Steve Reinhardt <steve.reinhardt@amd.com>
--HG--
extra : rebase_source : 154c9c7e1ebdd77e09fe5f28d0cfddc9e6c6b1eb
The Mercurial style checker extensions are currently stored in
style.py. This is not ideal since they won't work with other version
control systems. This changeset renames style.py to hgstyle.py and
adds upgrade code to scons that automatically updates the hooks in
hgrc.
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-by: Nathanael Premillieu <nathananel.premillieu@arm.com>
Reviewed-by: Steve Reinhardt <steve.reinhardt@amd.com>
--HG--
rename : util/style.py => util/hgstyle.py
extra : rebase_source : ee8107ef245901371b368b7c2046ecdd89e3ff4c
Remove the unsupported style.py subcommands (fixwhite, chkwhite),
which leaves the chkformat command as the only remaining
command. Since the script now only supports one command, remove the
sub-command support altogether.
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-by: Nathanael Premillieu <nathananel.premillieu@arm.com>
--HG--
extra : rebase_source : 548081a5f5358064bffd941b51dd895cff1e2df8
The following changes introduced substantial changes to sort_includes.py:
- hg:84b4d6af0ecc - util: Fix state leakage in ...
- hg:e2f9644a7738 - style: Update the style checker to handle new ...
Since the file didn't include a copyright header at the time, I never
added the correct ARM copyright notice. This changeset adds the
correct copyright notice.
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
The style checker incorrectly includes newlines when checking lines of
code, which effectively decreases the column limit by 1. This
changeset strips the newline character from before calling line
checkers.
Change-Id: I0a8c7707ece57d782d11cc86db4b8064db291ce0
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
This patch adds a config script that broadly replicates the behaviour
of lat_mem_rd. The test is based on traffic generators, and as such we
simply randomise addresses in increasingly large ranges, and play them
back using the trace functionality of the traffic generator.
The test script is accompanied by a post-processing and visualisation
script. At the moment no configurability is added to tweak the memory
hierarchy, but a follow on patch could easily extend the
functionality.
Bug fix for check on protobuf file frequency being different than
global frequency.
The ASCII encoder script is also fixed, and the example trace used in
the regressions is updated.
Added a new Verifier object to check for and fix spacing
between if/while/for and following paren.
Restructured Verifier class to make it easier to add
new subclasses, particularly by using a global list of
verifiers to auto-generate command line options and
simplify the invocation loop.
The functions in these scripts were apparently folded into style.py but the
old scripts were orphaned without being deleted. Get rid of them so their
existence is no longer confusing.
Distributed gem5 (abbreviated dist-gem5) is the result of the
convergence effort between multi-gem5 and pd-gem5 (from Univ. of
Wisconsin). It relies on the base multi-gem5 infrastructure for packet
forwarding, synchronisation and checkpointing but combines those with
the elaborated network switch model from pd-gem5.
--HG--
rename : src/dev/net/multi_etherlink.cc => src/dev/net/dist_etherlink.cc
rename : src/dev/net/multi_etherlink.hh => src/dev/net/dist_etherlink.hh
rename : src/dev/net/multi_iface.cc => src/dev/net/dist_iface.cc
rename : src/dev/net/multi_iface.hh => src/dev/net/dist_iface.hh
rename : src/dev/net/multi_packet.hh => src/dev/net/dist_packet.hh
Previous ARM-based simulations were limited to 8 cores due to
limitations in GICv2 and earlier. This changeset adds a set of
gem5-specific extensions that enable support for up to 256 cores.
When the gem5 extensions are enabled, the GIC uses CPU IDs instead of
a CPU bitmask in the GIC's register interface. To OS can enable the
extensions by setting bit 0x200 in ICDICTR.
This changeset is based on previous work by Matt Evans.
This patch adds support to optionally capture the virtual address and asid
for load/store instructions in the elastic traces. If they are present in
the traces, Trace CPU will set those fields of the request during replay.
This patch replaces the booleans that specified the elastic trace record
type with an enum type. The source of change is the proto message for
elastic trace where the enum is introduced. The struct definitions in the
elastic trace probe listener as well as the Trace CPU replace the boleans
with the proto message enum.
The patch does not impact functionality, but traces are not compatible with
previous version. This is preparation for adding new types of records in
subsequent patches.
With clang there are systems without gcc being installed anymore and we should
not rely on that. This patch drops CC so that system's default compiler is
invoked.
Committed by: Nilay Vaish <nilay@cs.wisc.edu>
Due to changes in Drain Manager, the lastest systemc coupling doesn't work. The
code for handling Checkpoint has been modified and it is now compatiable with
new drain manager.
Testing is being done on systemC coupling. It needs more testing to verify
checkpointing feature.
Committed by: Nilay Vaish <nilay@cs.wisc.edu>
The DTRACE() macro tests both Trace::enabled and the specific flag. This
change uses the same administrative interface for enabling/disabling
tracing, but masks the SimpleFlags settings directly. This eliminates a
load for every DTRACE() test, e.g. DPRINTF.
If the terminal was used in the SystemC or TLM simulations the simulation gets
in a deadlock state. This is because of the Event queue gets locked while
servicing the async events leading to event queue deadlock. This was solved by
locking the queue at the beginning of service of async events.
Committed by: Nilay Vaish <nilay@cs.wisc.edu>
The CleanEvict command was not considered in /util/tlm/sc_port.cc this could
lead to a simulator crash. This issue is solved by ignoring this special
command type.
Committed by: Nilay Vaish <nilay@cs.wisc.edu>
Rewrite the HDLCD controller to use the new DMA engine and pixel
pump. This fixes several bugs in the current implementation:
* Broken/missing interrupt support (VSync, underrun, DMA end)
* Fragile resolution changes (changing resolutions used
to cause assertion errors).
* Support for resolutions with a width that isn't divisible by 32.
* The pixel clock can now be set dynamically.
This breaks checkpoint compatibility. Checkpoints can be upgraded with
the checkpoint conversion script. However, upgraded checkpoints won't
contain the state of the current frame. That means that HDLCD
controllers restoring from a converted checkpoint immediately start
drawing a new frame (i.e, expect timing differences).
This commit addresses gem5 checkpoints' linear versioning bottleneck.
Since development is distributed across many private trees, there exists
a sort of 'race' for checkpoint version numbers: internally a checkpoint
version may be used but then resynchronizing with the external tree causes
a conflict on that version. This change replaces the linear version number
with a set of unique strings called tags. Now the only conflicts that can
arise are of tag names, where collisions are much easier to avoid.
The checkpoint upgrader (util/cpt_upgrader.py) upgrades the version
representation, as one would expect. Each tag version implements its
upgrader code in a python file in the util/cpt_upgraders directory
rather than adding a function to the upgrader script itself.
The version tags are stored in the 'Globals' section rather than 'root'
(as the version was previously) because 'Globals' gets unserialized
first and can provide a warning before any other unserialization errors
can occur.
This patch enhances the functionality of the DRAM sweep script to not
only plot the bandwidth utilisation, but also total power and power
efficiency. To do so, a command-line switch is added, and a bit more
data extracted from the stats.
Transaction Level Modeling (TLM2.0) is widely used in industry for creating
virtual platforms (IEEE 1666 SystemC). This patch contains a standard compliant
implementation of an external gem5 port, that enables the usage of gem5 as a
TLM initiator component in SystemC based virtual platforms. Both TLM coding
paradigms loosely timed (b_transport) and aproximately timed (nb_transport) are
supported.
Compared to the original patch a TLM memory manager was added. Furthermore, the
transaction object was removed and for each TLM payload a PacketPointer that
points to the original gem5 packet is added as an TLM extension. For event
handling single events are now created.
Committed by: Nilay Vaish <nilay@cs.wisc.edu>
This patch extends the previous patch's alterations around fd_map. It cleans
up some of the uglier code in the process file and replaces it with a more
concise C++11 version. As part of the changes, the FdMap class is pulled out
of the Process class and receives its own file.
Multi gem5 is an extension to gem5 to enable parallel simulation of a
distributed system (e.g. simulation of a pool of machines
connected by Ethernet links). A multi gem5 run consists of seperate gem5
processes running in parallel (potentially on different hosts/slots on
a cluster). Each gem5 process executes the simulation of a component of the
simulated distributed system (e.g. a multi-core board with an Ethernet NIC).
The patch implements the "distributed" Ethernet link device
(dev/src/multi_etherlink.[hh.cc]). This device will send/receive
(simulated) Ethernet packets to/from peer gem5 processes. The interface
to talk to the peer gem5 processes is defined in dev/src/multi_iface.hh and
in tcp_iface.hh.
There is also a central message server process (util/multi/tcp_server.[hh,cc])
which acts like an Ethernet switch and transfers messages among the gem5 peers.
A multi gem5 simulations can be kicked off by the util/multi/gem5-multi.sh
wrapper script.
Checkpoints are supported by multi-gem5. The checkpoint must be
initiated by a single gem5 process. E.g., the gem5 process with rank 0
can take a checkpoint from the bootscript just before it invokes
'mpirun' to launch an MPI test. The message server process will notify
all the other peer gem5 processes and make them take a checkpoint, too
(after completing a global synchronisation to ensure that there are no
inflight messages among gem5).
This patch adds a random option to memtest.py which allows the user to
easily test valid random tree topologies. The patch also adds a
wrapper script to run soak tests using the newly introduced option.
We also adjust the progress interval and progress limit check to make
the output less noisy, and avoid false positives.
Bring on the pain.
The m5format command didn't actually work due to parameter handling
issues and missing language detection. This changeset fixes those
issues and cleans up some of the code to shared between the style
checker and the format checker.
The style used to support the option -w to automatically fix white
space issues. However, this option was actually wired up to fix all
styles issues the checker encountered. This changeset cleans up the
code that handles automatic fixing and adds an option to fix all
issues, and separate options for white spaces and include ordering.
As of August 2014, the gem5 style guide mandates that a source file's
primary header is included first in that source file. This helps to
ensure that the header file does not depend on include file ordering
and avoids surprises down the road when someone tries to reuse code.
In the new order, include files are grouped into the following blocks:
* Primary header file (e.g., foo.hh for foo.cc)
* Python headers
* C system/stdlib includes
* C++ stdlib includes
* Include files in the gem5 source tree
Just like before, include files within a block are required to be
sorted in alphabetical order.
This changeset updates the style checker to enforce the new order.
This patch fixes checkpoint restore in the SystemC hosting example by handling
early PollEvent events correctly before any EventQueue events are posted.
The SystemC event queue handler (SCEventQueue) reports an error if the event
loop is entered with no Events posted. It is possible for this to happen
after instantiate due to PollEvent events. This patch separates out
`external' events into a different handler in sc_module.cc to prevent the
error from occurring.
This fix also improves the event handling of asynchronous events by:
1) Making asynchronous events 'catch up' gem5 time to SystemC
time to avoid the appearance that events have been lost
while servicing an asynchronous event that schedules an
event loop exit event
2) Add an in_simulate data member to Module to allow the event
loop to check whether events should be processed or deferred
until the next time Module::simulate is entered
3) Cancel pending events around the entry/exit of the event loop
in Module::simulate
4) Moving the state initialisation of the example entirely into
run to correct a problem with early events in checkpoint
restore.
It is still possible to schedule asynchronous events (and talk PollQueue
actions) while simulate is not running. This behaviour may stil cause
some problems.
This patch cleans up a few style issues and adds a few capabilities to the
SystemC top level 'Gem5Control/Gem5System' mechanism. These include:
1) A space to store/retrieve a version string for a model
2) A mechanism for registering functions to be called at the end of
elaboration to perform simulation setup tasks in SystemC
3) Adding setGDBRemotePort to the Gem5Control
4) Changing the sc_set_time_resolution behaviour to instead check that
the SystemC time resolution is already acceptable
This patch adds methods in KvmCPU model to handle KVM exits caused by syscall
instructions and page faults. These types of exits will be encountered if
KvmCPU is run in SE mode.
This patch fixes the checkpoint restore option in the example of C++
configuration (util/cxx_config).
The fix introduces a call to config_manager->startup() (which calls startup
on all SimObjects managed by that manager) to replicate the loop of
SimObject::startup calls in src/python/m5/simulate.py::simulate guarded by
need_startup. As util/cxx_config/main.cc is a C++ analogue of
src/python/mt/simulate.py, it should make a similar set of calls.
This patch hosts gem5 onto SystemC scheduler. There's already an upstream
review board patch that does something similar but this patch ...:
1) is less obtrusive to the existing gem5 code organisation. It's divided
into the 'generic' preparatory patches (already submitted) and this patch
which affects no existing files
2) does not try to exactly track the gem5 event queue with notifys into
SystemC and so doesn't requive the event queue to be modified for
anything other than 'out of event queue' scheduling events
3) supports debug logging with SC_REPORT
The patch consists of the files:
util/systemc/
sc_gem5_control.{cc,hh} -- top level objects to use to
instantiate gem5 Systems within
larger SystemC test harnesses as
sc_module objects
sc_logger.{cc,hh} -- logging support
sc_module.{cc,hh} -- a separated event loop specific to
SystemC
stats.{cc,hh} -- example Stats handling for the sample
top level
main.{cc,hh} -- a sample top level
On the downside this patch is only currently functional with C++
configuration at the top level.
The above sc_... files are indended to be compiled alongside gem5 (as a
library, see main.cc for a command line and util/systemc/README for
more details.)
The top-level system instantiation in sc_gem5_control.{cc,hh} provides
two classes: Gem5Control and Gem5System
Gem5Control is a simulation control class (from which a singleton
object should be created) derived from Gem5SystemC::Module which
carries the top level simulation control interface for gem5. This
includes hosting a system-building configuration file and
instantiating the Root object from that file.
Gem5System is a base class for instantiating renamed gem5 Systems
from the config file hosted by the Gem5Control object. In use, a
SystemC module class should be made which represents the desired,
instantiable gem5 System. That class's instances should create
a Gem5System during their construction, set the parameters of that
system and then call instantiate to build that system. If this
is all carried out in the sc_core::sc_module-derived classes
constructor, the System's external ports will become children of
that module and can then be recovered by name using sc_core::
sc_find_object.
It is intended that this interface is used with dlopen. To that
end, the header file sc_gem5_control.hh includes no other header
files from gem5 (and so can be easily copied into another project).
The classes Gem5System and Gem5Control have all their member
functions declared `virtual' so that those functions can be called
through the vtable acquired by building the top level Gem5Control
using dlsym(..., "makeGem5Control") and `makeSystem' on the
Gem5Control.
This patch adds the ability to load in config.ini files generated from
gem5 into another instance of gem5 built without Python configuration
support. The intended use case is for configuring gem5 when it is a
library embedded in another simulation system.
A parallel config file reader is also provided purely in Python to
demonstrate the approach taken and to provided similar functionality
for as-yet-unknown use models. The Python configuration file reader
can read both .ini and .json files.
C++ configuration file reading:
A command line option has been added for scons to enable C++ configuration
file reading: --with-cxx-config
There is an example in util/cxx_config that shows C++ configuration in action.
util/cxx_config/README explains how to build the example.
Configuration is achieved by the object CxxConfigManager. It handles
reading object descriptions from a CxxConfigFileBase object which
wraps a config file reader. The wrapper class CxxIniFile is provided
which wraps an IniFile for reading .ini files. Reading .json files
from C++ would be possible with a similar wrapper and a JSON parser.
After reading object descriptions, CxxConfigManager creates
SimObjectParam-derived objects from the classes in the (generated with this
patch) directory build/ARCH/cxx_config
CxxConfigManager can then build SimObjects from those SimObjectParams (in an
order dictated by the SimObject-value parameters on other objects) and bind
ports of the produced SimObjects.
A minimal set of instantiate-replacing member functions are provided by
CxxConfigManager and few of the member functions of SimObject (such as drain)
are extended onto CxxConfigManager.
Python configuration file reading (configs/example/read_config.py):
A Python version of the reader is also supplied with a similar interface to
CxxConfigFileBase (In Python: ConfigFile) to config file readers.
The Python config file reading will handle both .ini and .json files.
The object construction strategy is slightly different in Python from the C++
reader as you need to avoid objects prematurely becoming the children of other
objects when setting parameters.
Port binding also needs to be strictly in the same port-index order as the
original instantiation.
This patch adds a python script that processes the configuration and the
statistics file from a simulation run. Configuration and activity of network
routers and links obtained from this processing is fed to DSENT via its Python
interface. DSENT then computes the area and the power consumption of these
network components. The script outputs these quantities to the console.
Updated the stat_config.ini files to reflect new structure.
Moved to a more generic stat naming scheme that can easily handle
multiple CPUs and L2s by letting the script replace pre-defined #
symbols to CPU or L2 ids.
Removed the previous per_switch_cpus sections. Still can be used by
spelling out the stat names if necessary. (Resuming from checkpoints
no longer use switch_cpus. Only fast-forwarding does.)
Analogous to ee049bf (for x86). Requires a bump of the checkpoint version
and corresponding upgrader code to move the condition code register values
to the new register file.
This patch adds basic functionality to quickly visualise the output
from the DRAM efficiency script. There are some unfortunate hacks
needed to communicate the needed information from one script to the
other, and we fall back on (ab)using the simout to do this.
As part of this patch we also trim the efficiency sweep to stop at 512
bytes as this should be sufficient for all forseeable DRAMs.
There are some directories within the repository where we don't want
to enforce our coding style. Specifically, we don't want the style
hooks to warn whenever we update external code in the ext/ directory.
The 'hg m5style' command had some rather strange semantics. When
called without arguments, it applied the style checker to all added
files and modified regions of modified files. However, when providing
a list of files, it used that list as an ignore list instead of
specifically checking those files.
This patch makes the m5style command behave more like other Mercurial
commands where the arguments are used to specify which files to work
on instead of which files to ignore.
This patch adds a fix for older checkpoints before support for
multiple event queues were added in changeset 2cce74fe359e. The change
in checkpoint version should really hav ebeen part of the
aforementioned changeset.
There are cases where the state of a SortIncludes object gets messed
up and leaks between invocations/files. This typically happens when a
file ends with an include block (dump_block() gets called at the end
of __call__). In this case, the state of the class is not reset
between files. This bug manifests itself as ghost includes that leak
between files when applying the style hooks.
This changeset adds a reset at the beginning of the __call__ method
which ensures that the class is always in a clean state when
processing a new file.
This patch moves the code for opening an input protobuf packet trace into
a function defined in the protobuf library. This is because the code is
commonly used in decode scripts and is independent of the src protobuf
message.
This patch contains a new CPU model named `Minor'. Minor models a four
stage in-order execution pipeline (fetch lines, decompose into
macroops, decompose macroops into microops, execute).
The model was developed to support the ARM ISA but should be fixable
to support all the remaining gem5 ISAs. It currently also works for
Alpha, and regressions are included for ARM and Alpha (including Linux
boot).
Documentation for the model can be found in src/doc/inside-minor.doxygen and
its internal operations can be visualised using the Minorview tool
utils/minorview.py.
Minor was designed to be fairly simple and not to engage in a lot of
instruction annotation. As such, it currently has very few gathered
stats and may lack other gem5 features.
Minor is faster than the o3 model. Sample results:
Benchmark | Stat host_seconds (s)
---------------+--------v--------v--------
(on ARM, opt) | simple | o3 | minor
| timing | timing | timing
---------------+--------+--------+--------
10.linux-boot | 169 | 1883 | 1075
10.mcf | 117 | 967 | 491
20.parser | 668 | 6315 | 3146
30.eon | 542 | 3413 | 2414
40.perlbmk | 2339 | 20905 | 11532
50.vortex | 122 | 1094 | 588
60.bzip2 | 2045 | 18061 | 9662
70.twolf | 207 | 2736 | 1036
This patch adds a first version of a script that processes the debug
output and generates a command trace for DRAMPower. This is work in
progress and is intended as a snapshot of ongoing work at this point.
The longer term plan is to link in DRAMPower as a library and have one
instance of the model per rank, and instantiate it based on a struct
passed from gem5. Each command will then be a call to the model and no
parsing of traces will be necessary.
The style checker used to traverse symlinks if they pointed to files, which can
result in style checker failure if the pointed-to file doesn't exist. This
style check is actually unnecessary, since symlinks either point to other files
that are already style checked, or files outside gem5, which shouldn't be
checked. Skip symlinks.
Upon aggregating records, serialize system's cache-block size, as the
cache-block size can be different when restoring from a checkpoint. This way,
we can correctly read all records when restoring from a checkpoints, even if
the cache-block size is different.
Note, that it is only possible to restore from a checkpoint if the
desired cache-block size is smaller or equal to the cache-block size
when the checkpoint was taken; we can split one larger request into
multiple small ones, but it is not reliable to do the opposite.
Committed by: Nilay Vaish <nilay@cs.wisc.edu>
1) fixes a typo for clean target libgemOpJni.so -> libgem5OpJni.so
2) addes jni_gem5Op.h to clean since it is added during make
3) links the m5 utility statically since it won't work on some images otherwise
This patch changes the decode script to output the optional fields of
the proto message Packet, namely id and flags. The flags field is set
by the communication monitor.
The id field is useful for CPU trace experiments, e.g. linking the
fetch side to decode side. It had to be renamed because it clashes
with a built in python function id() for getting the "identity" of an
object.
This patch also takes a few common function definitions out from the
multiple scripts and adds them to a protolib python module.
Note: AArch64 and AArch32 interworking is not supported. If you use an AArch64
kernel you are restricted to AArch64 user-mode binaries. This will be addressed
in a later patch.
Note: Virtualization is only supported in AArch32 mode. This will also be fixed
in a later patch.
Contributors:
Giacomo Gabrielli (TrustZone, LPAE, system-level AArch64, AArch64 NEON, validation)
Thomas Grocutt (AArch32 Virtualization, AArch64 FP, validation)
Mbou Eyole (AArch64 NEON, validation)
Ali Saidi (AArch64 Linux support, code integration, validation)
Edmund Grimley-Evans (AArch64 FP)
William Wang (AArch64 Linux support)
Rene De Jong (AArch64 Linux support, performance opt.)
Matt Horsnell (AArch64 MP, validation)
Matt Evans (device models, code integration, validation)
Chris Adeniyi-Jones (AArch64 syscall-emulation)
Prakash Ramrakhyani (validation)
Dam Sunwoo (validation)
Chander Sudanthi (validation)
Stephan Diestelhorst (validation)
Andreas Hansson (code integration, performance opt.)
Eric Van Hensbergen (performance opt.)
Gabe Black
The checkpoint aggregation script had become outdated due to numerous changes
to checkpoints over the past couple of years. This updates the script. It
now supports aggregation for x86 architecture instead of alpha. Also a couple
of new options have been added that specify the size of the memory file to be
created and whether or not the memory file should be compressed.
Thumb2 ARM kernels may access the TEEHBR via thumbee_notifier
in arch/arm/kernel/thumbee.c. The Linux kernel code just seems
to be saving and restoring the register. This patch adds support
for the TEEHBR cp14 register. Note, this may be a special case
when restoring from an image that was run on a system that
supports ThumbEE.
Newer linux kernels and distros exercise more functionality in the IDE device
than previously, exposing 2 races. The first race is the handling of aborted
DMA commands would immediately report the device is ready back to the kernel
and cause already in flight commands to assert the simulator when they returned
and discovered an inconsitent device state. The second race was due to the
Status register not being handled correctly, the interrupt status bit would get
stuck at 1 and the driver eventually views this as a bad state and logs the
condition to the terminal. This patch fixes these two conditions by making the
device handle aborted commands gracefully and properly handles clearing the
interrupt status bit in the Status register.
Changes to make m5ops work under virtualization seemed to break them working
with non-virtualized systems and the recently added m5 fail command makes
the m5op binary not compile. For now remove the code for virtualization.
This Python script generates an ARM DS-5 Streamline .apc project based
on gem5 run. To successfully convert, the gem5 runs needs to be run
with the context-switch-based stats dump option enabled (The guest
kernel also needs to be patched to allow gem5 interrogate its task
information.) See help for more information.
In order to support m5ops in virtualized environments, we need to use
a memory mapped interface. This changeset adds support for that by
reserving 0xFFFF0000-0xFFFFFFFF and mapping those to the generic IPR
interface for m5ops. The mapping is done in the
X86ISA::TLB::finalizePhysical() which means that it just works for all
of the CPU models, including virtualized ones.
This patch makes it possible to once again build gem5 without any
ISA. The main purpose is to enable work around the interconnect and
memory system without having to build any CPU models or device models.
The regress script is updated to include the NULL ISA target. Currently
no regressions make use of it, but all the testers could (and perhaps
should) transition to it.
--HG--
rename : build_opts/NOISA => build_opts/NULL
rename : src/arch/noisa/SConsopts => src/arch/null/SConsopts
rename : src/arch/noisa/cpu_dummy.hh => src/arch/null/cpu_dummy.hh
rename : src/cpu/intr_control.cc => src/cpu/intr_control_noisa.cc
Using arm-linux-gnueabi-gcc 4.7.3-1ubuntu1 on Ubuntu 13.04 to compiled
the m5 binary yields the error:
m5op_arm.S: Assembler messages:
m5op_arm.S:85: Error: selected processor does not support ARM mode `bxj lr'
For each of of the SIMPLE_OPs. Apparently, this compiler doesn't like the
interworking of these code types for the default arch. Adding -march=armv7-a
makes it compile. Another alternative that I found to work is replacing the
bxj lr instruction with mov pc, lr, but I don't know how that affects the
KVM stuff and if bxj is needed.
This patch adds checkpointing support to x86 tlb. It upgrades the
cpt_upgrader.py script so that previously created checkpoints can
be updated. It moves the checkpoint version to 6.
This patch simplifies the usage of the packet trace encoder/decoder by
attempting to automatically generating the packet proto definitions in
case they cannot be found.
Changeset 5ca6098b9560 accidentally broke the m5 utility. This
changeset adds the missing co-processor call used to trigger the
pseudo-op in ARM mode and fixes an alignment issue that caused some
pseudo-ops to leave thumb mode.
