Add the options 'panic_on_panic' and 'panic_on_oops' to the
LinuxArmSystem SimObject. When these option are enabled, the simulator
panics when the guest kernel panics or oopses. Enable panic on panic
and panic on oops in ARM-based test cases.
Previously, nextCycle() could return the *current* cycle if the current tick was
already aligned with the clock edge. This behavior is not only confusing (not
quite what the function name implies), but also caused problems in the
drainResume() function. When exiting/re-entering the sim loop (e.g., to take
checkpoints), the CPUs will drain and resume. Due to the previous behavior of
nextCycle(), the CPU tick events were being rescheduled in the same ticks that
were already processed before draining. This caused divergence from runs that
did not exit/re-entered the sim loop. (Initially a cycle difference, but a
significant impact later on.)
This patch separates out the two behaviors (nextCycle() and clockEdge()),
uses nextCycle() in drainResume, and uses clockEdge() everywhere else.
Nothing (other than name) should change except for the drainResume timing.
This patch is based on http://reviews.m5sim.org/r/1474/ originally written by
Mitch Hayenga. Basic block vectors are generated (simpoint.bb.gz in simout
folder) based on start and end addresses of basic blocks.
Some comments to the original patch are addressed and hooks are added to create
and resume from checkpoints based on instruction counts dictated by external
SimPoint analysis tools.
SimPoint creation/resuming options will be implemented as a separate patch.
Newer core tiles / daughterboards for the Versatile Express platform have an
HDLCD controller that supports HD-quality output. This patch adds an
implementation of the controller.
This changeset adds support for forwarding arguments to the PC
event constructors to following methods:
addKernelFuncEvent
addFuncEvent
Additionally, this changeset adds the following helper method to the
System base class:
addFuncEventOrPanic - Hook a PCEvent to a symbol, panic on failure.
addKernelFuncEventOrPanic - Hook a PCEvent to a kernel symbol, panic
on failure.
System implementations have been updated to use the new functionality
where appropriate.
This change fixes the switcheroo test that broke earlier this month. The code
that was checking for the pipeline being blocked wasn't checking for a pending
translation, only for a icache access.
Without loading weak symbols into gem5, some function names and the given PC
cannot correspond correctly, because the binding attributes of unction names
in an ELF file are not only STB_GLOBAL or STB_LOCAL, but also STB_WEAK. This
patch adds a function for loading weak symbols.
Committed by: Nilay Vaish <nilay@cs.wisc.edu>
This patch adds a missing flag to the ldr_ret_uop microop instruction.
The flag is added when the instruction is used, not directly in the
constructor of the instruction.
Committed by: Nilay Vaish <nilay@cs.wisc.edu>"
This patch fixes two instances of incorrect use of the seekp/seekg
stream member functions. These two functions return a stream reference
(*this), and should not be compared to an integer value.
The new changeset that can reorder Ruby profilers will cause the ruby.stats
files to reordered statistics (the point of the patch). Update the references
to ensure that these changes are reflected in regressions.
In Simulation.py, calls to m5.simulate(num_ticks) will run the simulated system
for num_ticks after the current tick. Fix calls to m5.simulate in
scriptCheckpoints() and benchCheckpoints() to appropriately handle the maxticks
variable.
When using the o3 or inorder CPUs with many Ruby protocols, the caches may
need to forward invalidations to the CPUs. The RubyPort was instantiating a
packet to be sent to the CPUs to signal the eviction, but the packets were
not being freed by the CPUs. Consistent with the classic memory model, stack
allocate the packet and heap allocate the request so on
ruby_eviction_callback() completion, the packet deconstructor is called, and
deletes the request (*Note: stack allocating the request causes double
deletion, since it will be deleted in the packet destructor). This results in
the least memory allocations without memory errors.
When warming up caches in Ruby, the CacheRecorder sends fetch requests into
Ruby Sequencers with packet types that require responses. Since responses are
never generated for these CacheRecorder requests, the requests are not deleted
in the packet destructor called from the Ruby hit callback. Free the request.
This allows you to have (i.e.) an L2 cache that is not named "L2Cache"
but is still a GenericMachineType_L2Cache. This is particularly
helpful if the protocol has multiple L2 controllers.
When Ruby stats are printed for events and transitions, they include stats
for all of the controllers of the same type, but they are not necessarily
printed in order of the controller ID "version", because of the way the
profilers were added to the profiler vector. This patch fixes the push order
problem so that the stats are printed in ascending order 0->(# controllers),
so statistics parsers may correctly assume the controller to which the stats
belong.
When connecting message buffers between Ruby controllers, it is
easy to mistakenly connect multiple controllers to the same message
buffer. This patch prints a more descriptive fatal message than the
previous assert statement in order to facilitate easier debugging.
The cache trace variables are array allocated uint8_t* in the RubySystem and
the Ruby CacheRecorder, but the code used delete to free the memory, resulting
in Valgrind memory errors. Change these deletes to delete [] to get rid of the
errors.
Currently the commit stage keeps a local copy of the interrupt object.
Since the interrupt is usually handled several cycles after the commit
stage becomes aware of it, it is possible that the local copy of the
interrupt object may not be the interrupt that is actually handled.
It is possible that another interrupt occurred in the
interval between interrupt detection and interrupt handling.
This patch creates a copy of the interrupt just before the interrupt
is handled. The local copy is ignored.
It is possible that operating system wants to shutdown the
lapic timer by writing timer's initial count to 0. This patch
adds a check that the timer event is only scheduled if the
count is 0.
The patch also converts few of the panics related to the keyboard
to warnings since we are any way not interested in simulating the
keyboard.
As of now, we mark the top 1MB of memory space as unusable. Part of
it is actually usable and is required to be marked so by some of the
newer versions of linux kernel. This patch marks the top 639KB as usable.
This value was chosen by looking at QEMU's output for bios memory map.
Fixes a latency calculation bug for accesses during a cache line fill.
Under a cache miss, before the line is filled, accesses to the cache are
associated with a MSHR and marked as targets. Once the line fill completes,
MSHR target packets pay an additional latency of
"responseLatency + busSerializationLatency". However, the "whenReady"
field of the cache line is only set to an additional delay of
"busSerializationLatency". This lacks the responseLatency component of
the fill. It is possible for accesses that occur on the cycle of
(or briefly after) the line fill to respond without properly paying the
responseLatency. This also creates the situation where two accesses to the
same address may be serviced in an order opposite of how they were received
by the cache. For stores to the same address, this means that although the
cache performs the stores in the order they were received, acknowledgements
may be sent in a different order.
Adding the responseLatency component to the whenReady field preserves the
penalty that should be paid and prevents these ordering issues.
Committed by: Nilay Vaish <nilay@cs.wisc.edu>
There's not much to do about it other than disable the offending
warning anyway, so it's not worth terminating the build over.
Also suppress uninitialized variable warnings on gcc (happens
at least with gcc 4.4 and swig 1.3.40).
This patch adds a simple Python script that reads the protobuf-encoded
packet traces (not gzipped), and prints them to an ASCII trace file.
The script can also be used as a template for other packet output
formats.
This patch adds a simple Python script that reads a simple ASCII trace
format and encodes it as protobuf output compatible with the traffic
generator.
The script can also be used as a template for other packet input
formats that should be converted to the gem5 packet protobuf format.
This patch solves the corner case scenario where the sendRetryEvent could be
scheduled twice, when an io device stresses the IOcache in the system. This
should not be possible in the cache system.
This patch splits the retryList into a list of ports that are waiting
for the bus itself to become available, and a map that tracks the
ports where forwarding failed due to a peer not accepting the
packet. Thus, when a retry reaches the bus, it can be sent to the
appropriate port that initiated that transaction.
As a consequence of this patch, only ports that are really ready to go
will get a retry, thus reducing the amount of redundant failed
attempts. This patch also makes it easier to reason about the order of
servicing requests as the ports waiting for the bus are now clearly
FIFO and much easier to change if desired.
This patch introduces a variable to keep track of the retrying port
instead of relying on it being the front of the retryList.
Besides the improvement in readability, this patch is a step towards
separating out the two cases where a port is waiting for the bus to be
free, and where the forwarding did not succeed and the bus is waiting
for a retry to pass on to the original initiator of the transaction.
The changes made are currently such that the regressions are not
affected. This is ensured by always prioritizing the currently
retrying port and putting it back at the front of the retry list.
This patch adds an optional generic 64-bit identifier field to the
packet trace. This can be used to store the sequential number of the
instruction that gave rise to the packet, thread id, master id,
"sub"-master within a larger module etc. As the field is optional it
has a marginal cost if not used.
This patch adds an optional flags field to the packet trace to encode
the request flags that contain information about whether the request
is (un)cacheable, instruction fetch, preftech etc.
This patch changes the port in the CPU classes to use MasterPort
instead of the derived CpuPort. The functions of the CpuPort are now
distributed across the relevant subclasses. The port accessor
functions (getInstPort and getDataPort) now return a MasterPort
instead of a CpuPort. This simplifies creating derivative CPUs that do
not use the CpuPort.
Changeset 02321b16685f added m5_writefile to m5op_x86.S a second time,
which causes a compilation error on when compiling for x86. This
changeset reverts that changeset and fixes the error.
A recent set of patches added support for multiple clock domains to ruby.
I had made some errors while writing those patches. The sender was using
the receiver side clock while enqueuing a message in the buffer. Those
errors became visible while creating (or restoring from) checkpoints. The
errors also become visible when a multi eventq scenario occurs.
The message buffer node used to keep time in terms of Cycles. Since the
sender and the receiver can have different clock periods, storing node
time in cycles requires some conversion. Instead store the time directly
in Ticks.
