We currently check the current state instead of the state of the
target EL when determining how we report a fault. This breaks
interprocessing since EL0 in aarch32 would report its fault status
using the aarch32 registers even if EL1 is in aarch64. Fix this to
report the fault using the format of the target EL.
Change-Id: Ic080267ac210783d1e01c722a4ddaa687dce280e
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Mitch Hayenga <mitch.hayenga@arm.com>
The TLB currently assumes that the pxn bit in an LPAE page descriptor
disables execution from unprivileged mode. However, according to the
architecture manual, this bit should disable execution from privileged
modes. Update the TLB implementation to reflect this behavior.
Change-Id: I7f1bb232d7a94a93fd601a9230223195ac952947
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
A lot of code assumes that it is possible to test what the highest EL
is and if it is 64 bit. These calls currently don't work in SE mode
since they rely on an instance of an ArmSystem.
Change-Id: I0d1f261926a66ce3dc4fa116845ffb2a081446f2
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Nathanael Premillieu <nathanael.premillieu@arm.com>
This patch fixes a memory leak where deferred snoop packets never got
deallocated. On the call to MSHR::handleSnoop these snoops were
treated as if a response will be sent, as the MSHR was
pendingModified. Consequently, a copy of the packet was created and
added to the MSHR targets. However, an preceeding target to the same
MSHR, originally from a CPU, was serviced before the snoop, and caused
the block to be invalidated. This happens for ReadExReq and
UpgradeReq.
Note that the original snoop will receive a response, just not from
the cache in question, but instead from the cache upstream that issued
the ReadExReq or UpgradeReq.
Change-Id: I4ac012fbc8a46cf693ca390fe9476105d444e6f4
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Make it possible to disable gem5 gic extensions by setting the
gem5_extensions param to False from Python.
Change-Id: Icb255105925ef49891d69cc9fe5cc55578ca066d
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Geoffrey Blake <geoffrey.blake@arm.com>
This patch adds a progress check to the TrafficGen so that it is
easier to detect deadlock scenarios where the generator gets stuck
waiting for a retry, and makes no further progress.
Change-Id: Ifb8779ad0939f52c0518d0e867bac73f99b82e2b
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Radhika Jagtap <radhika.jagtap@arm.com>
This patch changes the flow control for HSHR::handleSnoop to ensure
that we only set cacheResponding on the snoop packet if we are
actually responding. This avoids situations where a responder is
stalling indefinitely on a response that never arrives.
Change-Id: I691dd01755b614b30203581aa74fc743b350eacc
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
This patch fixes the type of the unique_ptr instances, to ensure that
the data that is allocated with new[] is also deleted with
delete[]. The issue was highlighted by ASAN.
Change-Id: I2c5510424959d862a9954d83e728d901bb18d309
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-by: Stephan Diestelhorst <stephan.diestelhorst@arm.com>
This patch fixes an issue identified by ASAN where the Neon64Load
operation assumes the packet always contains 16 bytes.
Change-Id: If24a7e461d60cb80970dfbe61d923d7d56926698
Reviewed-by: Giacomo Gabrielli <giacomo.gabrielli@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
As identified by clang-3.8, there was a superfluous loop increment in
the flash device which is now removed.
Change-Id: If46a1c4f72d3d4c9f219124030894ca433c790af
Reviewed-by: Rene De Jong <rene.dejong@arm.com>
Implement gem5's test infrastructure as a Python module and a run
script that can be used without scons. The new implementation has
several features that were lacking from the previous test
infrastructure such as support for multiple output formats, automatic
runtime tracking, and better support for being run in a cluster
environment.
Tests consist of one or more steps (TestUnit). Units are run in two
stages, the first a run stage and then a verify stage. Units in the
verify stage are automatically skipped if any unit run stage wasn't
run. The library currently contains TestUnit implementations that run
gem5, diff stat files, and diff output files.
Existing tests are implemented by the ClassicTest class and "just
work". New tests can that don't rely on the old "run gem5 once and
diff output" strategy can be implemented by subclassing the Test base
class or ClassicTest.
Test results can be output in multiple formats. The module currently
supports JUnit, text (short and verbose), and Python's pickle
format. JUnit output allows CI systems to automatically get more
information about test failures. The pickled output contains all state
necessary to reconstruct a tests results object and is mainly intended
for the build system and CI systems.
Since many JUnit parsers parsers assume that test suite names look
like Java package names. We currently output path-like names with
slashes separating components. Test names are translated according to
these rules:
* '.' -> '-"
* '/' -> '.'
The test tool, tests.py, supports the following features:
* Test listing. Example: ./tests.py list arm/quick
* Running tests. Example:
./tests.py run -o output.pickle --format pickle \
../build/ARM/gem5.opt \
quick/se/00.hello/arm/linux/simple-timing
* Displaying pickled results. Example:
./tests.py show --format summary *.pickle
Change-Id: I527164bd791237aacfc65e7d7c0b67b695c5d17c
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-by: Joel Hestness <jthestness@gmail.com>
According to the Intel Multi Processor Specification rev 1.4 (-006) (*),
section 4.3.2 Bus Entries, Bus type strings are >>6-character ASCII
(blank-filled) strings<<.
This patch properly pads the entries with the missing spaces at the end.
(*) http://www.intel.com/design/pentium/datashts/24201606.pdf
Committed by Jason Lowe-Power <power.jg@gmail.com>
Given we do not simulate a FIFO currently there are only two states
we can be in upon read: empty or full. Properly signal the latter.
Add and sort constants for states in the header file.
Committed by Jason Lowe-Power <power.jg@gmail.com>
Registers are 0x10 and not 0x8 apart. The latter leads to invalid
calculations of index in array which in turn means that we will not
find the interrupt we were looking (been notified) for in the OS.
Committed by Jason Lowe-Power <power.jg@gmail.com>
VirtIO spec < 1.0 demands IOREG to be used on PCI and not memory mapped.
Set the correct bit on the PCI address accordingly.
Committed by Jason Lowe-Power <power.jg@gmail.com>
The SCons script currently assumes that .git is a proper directory
with all git meta data. This isn't the case if the working directory
was checked out using git worktrees. In such case .git is a file with
meta data telling git where the repository data is stored.
This changeset updates changes the SConstruct file to rely on git
rev-parse to get the real git directory.
Change-Id: I3d0475eabc12e868193797067a88e540a9b6e927
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
The learning gem5 scripts currently assumes that the current working
directory is the root of gem5's source tree. This isn't necessarily
the case when running the tests using gem5's new test runner.
Change-Id: Ief569bbe77b1b3e2b0fb0e6c575fb0705bbba9b3
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
the n_reg field in the GPUDynInst is not currently set in the constructor.
if it is not set externally, there are assertion failures that may occur
if the random value it gets is just right. here we set it to 0 by default.
The GICv2 has a new and slightly more consistent register
naming. Update gem5's GIC register names to match the new
documentation.
Change-Id: I8ef114eee8a95bf0b88b37c18a18e137be78675a
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
The dts files in system/arm/dt currently assume that an (unreleased)
gem5-specific virtual encoder is used as a remote endpoint for the
HDLCD. This driver won't be released as a more general virtual encoder
is about to be posted on the Linux DRI devel list and this encoder has
now been merged with gem5's kernel tree. This changeset updates gem5's
dts files to use that encoder.
Change-Id: Ic1a1be728efd31603752fdfba005b6dbdea42e7e
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Rene De Jong <rene.dejong@arm.com>
Previously it ignored the ignores for git but not Mercurial.
Change-Id: I178fe879ebd268e863063eb9e30ec87e8ac8faec
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
The git style hook currently includes a few lines of diff context when
determining changed regions. This is undesirable as this triggers
false positives when modifying existing files with a lot of style
violations. This change sets the amount of context to 0, which is the
default value when requesting staged regions from the git helper.
Change-Id: Ibe03123e329ea0241281e104183a68d6c495b190
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nathanael Premillieu <nathanael.premillieu@arm.com>
Remove test reference files that are not generated any more:
* chair.cook.ppm: This file should be generated by eon and not
mcf, so it shouldn't be included as an output from mcf.
* system.pc.terminal: The terminal device has been renamed so this
file is no longer generated.
Change-Id: I3962efe1ff25479ca276115f7564eccb5fac8cf9
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
The LinuxArmSystem class normally provides support for panicing gem5
if the simulated kernel panics. When this is turned off (default),
gem5 uses a BreakPCEvent to provide a debugger hook into the simulator
when the kernel crashes. This hook unconditionally kills gem5 with a
SIGTRAP unless gem5 is compiled in fast mode. This is undesirable
since the panic_on_panic param already provides similar functionality.
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Add support for overriding the number of interrupt lines in the ARM
KvmGic.
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Radhika Jagtap <radhika.jagtap@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Factor out the kernel device wrapper from the KvmGIC and put it in a
separate class. This will simplify a future kernel/gem5 hybrid GIC.
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Radhika Jagtap <radhika.jagtap@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
The Terminal device currently uses the peek functionality in gem5's
circular buffer implementation to send existing buffered content on
the terminal when a new client attaches. This functionallity is
however not implemented correctly and re-sends the same block multiple
time.
Add the required functionality to peek with an offset into the
circular buffer and change the Terminal::accept() implementation to
send the buffered contents.
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Radhika Jagtap <radhika.jagtap@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Allow usage of packet class in ruby for convenience purposes. This may be
used to access members of the packet/request class (e.g., via helper
functions) and/or push protocol specific information to the packets
SenderState without needing to modify SLICC types and protocols in multiple
locations.
This patch removes the write-queue entry tracking previously used for
uncacheable writes. The write-queue entry is now deallocated as soon
as the packet is sent. As a result we also forego the stats for
uncacheable writes. Additionally, there is no longer a need to attach
the write-queue entry to the packet.
The style checker code needs to disable autojunk when diffing source
files using Python's difflib. Support for this was only introduced in
Python 2.7, which leads to a TypeError exception on older Python
version. This changeset adds a fallback mechanism for old Python
versions.
Ruby's controller block_on behavior aimed to block MessageBuffer requests into
SLICC controllers when a Locked_RMW was in flight. Unfortunately, this
functionality only partially works: When non-Locked_RMW memory accesses are
issued to the sequencer to an address with an in-flight Locked_RMW, the
sequencer may pass those accesses through to the controller. At the controller,
a number of incorrect activities can occur depending on the protocol. In
MOESI_hammer, for example, an intermediate IFETCH will cause an L1D to L2
transfer, which cannot be serviced, because the block_on functionality blocks
the trigger queue, resulting in a deadlock. Further, if an intermediate store
arrives (e.g. from a separate SMT thread), the sequencer allows the request
through to the controller, and the atomicity of the Locked_RMW may be broken.
To avoid these problems, disallow the Sequencer from passing any memory
accesses to the controller besides Locked_RMW_Write when a Locked_RMW is in-
flight.
Remve the assertion that we always need to add a delta larger than
zero as that does not seem to be true when we hit it in the
'PMU reset cycle counter to zero' case.
Committed by Jason Lowe-Power <power.jg@gmail.com>
