dev/ns_gige.cc:
add support for delaying pio writes until the cache access occurs
the only write we delay are for CR_TXE and CR_RXE
dev/sinic.cc:
dev/sinic.hh:
the txPioRequest and rxPioRequest things were more or less bogus
add support for delaying pio writes until the cache access occurs
dev/sinicreg.hh:
Add delay_read and delay_write to the register information struct
for now, we won't delay any reads, and we'll delay the writes that
initiate DMAs
python/m5/objects/Ethernet.py:
add a parameter to delay pio writes until the timing access
actually occurs.
--HG--
extra : convert_revision : 79b18ea2812c2935d7d5ea6eff1f55265114d05d
pci device base class
dev/sinic.cc:
dev/sinic.hh:
use the new readBar/writeBar stuff that's in the pci device
base class
--HG--
extra : convert_revision : 8a0b2bde3cc13597785d6ea75d6e6811680bb01b
can specify either independently.
python/m5/objects/Device.py:
io_bus is split out into pio_bus and dma_bus so that any device
can specify either independently.
dma_bus defaults to point to whatever pio_bus uses.
--HG--
extra : convert_revision : d35d5374d0bf592f6b5df465c05203577b8b8763
interrupts.
dev/sinic.cc:
- The prepareRead function sets all the variables in the register
file that depend on various state bits that change on the fly.
Includes RxDone, RxWait, TxDone, and TxWait
- Use the new register information accessor functions to grab
validity and size information for the read and write functions
- read all registers directly from the register space by offset
and size, not by actual name (less code)
- The side effect of reading the interrupt status (clearing it) now
happens outside the actual chunk of code where the value is loaded.
- Add an iprRead function for when we may want speculative access
to device registers through an ipr or special instruction.
- When RxData or TxData are written, their busy flag is set to
indicate that they have an outstanding transaction.
- The RxHigh and TxLow interrupts are special, they only interrupt
if the rxEmpty or txFull limits were hit
- Move reset to the command register
- Update more registers on reset, clear rxEmpty and txFull
- Data dumps only happen if EthernetData trace flag set
- When a DMA completes, kick the other engine if it was waiting
- implement all of the new interrupts
- serialize the new stuff
dev/sinic.hh:
- Put all registers with their proper size and alignment into
the regs struct so that we can copy multiple at a time.
- Provide accessor functions for accessing the registers with
different sizes.
- Flags to track when the rx fifo hit empty and the tx fifo became
full. These flags are used to determine what to do when below
the watermarks, and are reset when crossing the watermark.
- the txDmaEvent should actually trigger the txDmaDone function
- Add an iprRead function for when we may want speculative access
to device registers through an ipr or special instruction.
- The prepareRead function sets all the variables in the register
file that depend on various state bits that change on the fly.
- add rx_max_intr and dedicated (for dedicated thread) config params
dev/sinicreg.hh:
Add some new registers: Command, RxMaxIntr, RxFifoSize, TxFifoSize,
rename XxThreshold to XxFifoMark
Move Reset to the Command register
Add Thread to the Config register
New interrupts, better names
More info in RxDone and TxDone
Easier access to information on each register (size, read, write, name)
python/m5/objects/Ethernet.py:
Both sinic and nsgige have the dedicated thread
Add a parameter to configure the maximum number for receive
packets per interrupt
--HG--
extra : convert_revision : 407c5a993b6fb17326b4c623ee5d4b25fd69ac80
Create EtherDevBase which both Sinic and NSGigE derive from
bump fifos
drop rx max copy size to 1514 bytes to be friendlier with linux
default interrupt delay is 10us
dev/ns_gige.cc:
Shuffle around parameters to make it easier to find stuff
dev/sinic.cc:
Shuffle around parameters to make it easier to find stuff
rename cycleTime -> clock
dev/sinic.hh:
rename cycleTime -> clock
--HG--
extra : convert_revision : a673bee875e50d083098991aea20972fa8d5b5c7
SConscript:
Added more files to compile: dev/pcifake.cc, dev/isa_fake.cc, kern/freebsd/freebsd_system.cc, kern/freebsd/freebsd_events.cc.
arch/alpha/isa_traits.hh:
Added constant for argument register 2 as it is needed by FreebsdSystem::doCalibrateClocks().
cpu/exec_context.hh:
cpu/o3/alpha_cpu.hh:
Replaced htoa()s with gtoh() and htog().
cpu/o3/fetch_impl.hh:
cpu/simple/cpu.cc:
Replaced htoa() with gtoh().
dev/disk_image.cc:
Replaced htoa()s with letoh()s.
dev/ide_ctrl.cc:
Got rid of magic numbers.
Added IdeChannel and IdeRegType type names where necessary.
dev/ide_ctrl.hh:
Got rid of unnecessary macros.
Changed RegType_t to IdeRegType.
Changed bmi_regs to allow accessing registers by name instead of just by array index.
Added IdeChannel enum type to use in place of bool variables which were used to specify IDE channel.
dev/ide_disk.cc:
Rewrote IdeDisk::read and IdeDisk::write functions to specify registers by name instead of indexing through an array.
dev/ide_disk.hh:
Updated command register struct.
dev/ns_gige.cc:
dev/ns_gige.hh:
Made ReadConfig and WriteConfig begin with a lower-case letter.
writeConfig() now takes a pointer to data as a parameter instead of a copy of data.
dev/pciconfigall.cc:
writeConfig() now takes a pointer to data as a parameter instead of a copy of data.
dev/pcidev.cc:
Cleaned up readConfig() and writeConfig() functions.
dev/pcidev.hh:
Added macros to make code that works with the BARs (base adress registers) more readable. writeConfig() now takes a pointer to data.
dev/pcireg.h:
Changed PCIConfig struct to make accessing elements more straight forward. Removed type 1 (for PCI-to-PCI bridges) PCI configuration space struct since it is not used.
dev/rtcreg.h:
Added macros for bit fields in RTC status registers A & B.
dev/sinic.cc:
Function name change: WriteConfig --> writeConfig.
writeConfig() now takes a pointer to data instead of a copy of data.
The accessing of elements of PCIConfig structure is updated.
dev/sinic.hh:
Function name change: WriteConfig --> writeConfig.
writeConfig() now takes a pointer to data instead of a copy of data.
dev/tsunami_io.cc:
Added implementation of new RTC and PIT classes.
dev/tsunami_io.hh:
Added classes for RTC and PIT modules.
dev/tsunamireg.h:
Added macros for DMA ports used by Tsunami-Tru64.
dev/uart8250.cc:
Got rid of a magic number.
Transmit (Tx) interrupts should clear upon a read of the Interrupt ID register.
dev/uart8250.hh:
Added comments and macros dealing with the UART Interrupt ID register.
kern/linux/linux_system.cc:
Replaced htoa() with htog().
python/m5/objects/Pci.py:
PciFake is a python class for Pci Devices that do nothing.
python/m5/objects/Tsunami.py:
TsunamiFake was renamed as IsaFake.
sim/system.cc:
Replaced htoa()s with htog()s.
dev/isa_fake.cc:
New BitKeeper file ``dev/isa_fake.cc''
TsunamiFake was renamed as IsaFake.
dev/isa_fake.hh:
New BitKeeper file ``dev/isa_fake.hh''
TsunmaiFake was renamed as IsaFake.
dev/pitreg.h:
New BitKeeper file ``dev/pitreg.h''
Useful macros for working with PIT (Periodic Interval Timer) registers.
--HG--
extra : convert_revision : 33f3a8a1034af4f6c71b32dd743e371c8613e780
CPU cycle ticks. This allows the user to have CPUs of different
frequencies, and also allows frequencies and latencies that are
not evenly divisible by the CPU frequency. For now, the CPU
frequency is still set to the global frequency, but soon, we'll
hopefully make the global frequency fixed at something like 1THz
and set all other frequencies independently.
arch/alpha/ev5.cc:
The cycles counter is based on the current cpu cycle.
cpu/base_cpu.cc:
frequency isn't the cpu parameter anymore, cycleTime is.
cpu/base_cpu.hh:
frequency isn't the cpu parameter anymore, cycleTime is.
create several public functions for getting the cpu frequency
and the numbers of ticks for a given number of cycles, etc.
cpu/memtest/memtest.cc:
cpu/simple_cpu/simple_cpu.cc:
cpu/simple_cpu/simple_cpu.hh:
cpu/trace/trace_cpu.cc:
Now that ticks aren't cpu cycles, fixup code to advance
by the proper number of ticks.
cpu/memtest/memtest.hh:
cpu/trace/trace_cpu.hh:
Provide a function to get the number of ticks for a given
number of cycles.
dev/alpha_console.cc:
Update for changes in the way that frequencies and latencies are
accessed. Move some stuff to init()
dev/alpha_console.hh:
Need a pointer to the system and the cpu to get the frequency
so we can pass the info to the console code.
dev/etherbus.cc:
dev/etherbus.hh:
dev/etherlink.cc:
dev/etherlink.hh:
dev/ethertap.cc:
dev/ide_disk.hh:
dev/ns_gige.cc:
dev/ns_gige.hh:
update for changes in the way bandwidths are passed from
python to C++ to accomidate the new way that ticks works.
dev/ide_disk.cc:
update for changes in the way bandwidths are passed from
python to C++ to accomidate the new way that ticks works.
Add some extra debugging printfs
dev/platform.cc:
dev/sinic.cc:
dev/sinic.hh:
outline the constructor and destructor
dev/platform.hh:
outline the constructor and destructor.
don't keep track of the interrupt frequency. Only provide the
accessor function.
dev/tsunami.cc:
dev/tsunami.hh:
outline the constructor and destructor
Don't set the interrupt frequency here. Get it from the actual device
that does the interrupting.
dev/tsunami_io.cc:
dev/tsunami_io.hh:
Make the interrupt interval a configuration parameter. (And convert
the interval to the new latency/frequency stuff in the python)
kern/linux/linux_system.cc:
update for changes in the way bandwidths are passed from
python to C++ to accomidate the new way that ticks works.
For now, we must get the boot cpu's frequency as a parameter
since allowing the system to have a pointer to the boot cpu would
cause a cycle.
kern/tru64/tru64_system.cc:
For now, we must get the boot cpu's frequency as a parameter
since allowing the system to have a pointer to the boot cpu would
cause a cycle.
python/m5/config.py:
Fix support for cycle_time relative latencies and frequencies.
Add support for getting a NetworkBandwidth or a MemoryBandwidth.
python/m5/objects/BaseCPU.mpy:
All CPUs now have a cycle_time. The default is the global frequency,
but it is now possible to set the global frequency to some large value
(like 1THz) and set each CPU frequency independently.
python/m5/objects/BaseCache.mpy:
python/m5/objects/Ide.mpy:
Make this a Latency parameter
python/m5/objects/BaseSystem.mpy:
We need to pass the boot CPU's frequency to the system
python/m5/objects/Ethernet.mpy:
Update parameter types to use latency and bandwidth types
python/m5/objects/Platform.mpy:
this frequency isn't needed. We get it from the clock interrupt.
python/m5/objects/Tsunami.mpy:
The clock generator should hold the frequency
sim/eventq.hh:
Need to remove this assertion because the writeback event
queue is different from the CPU's event queue which can cause
this assertion to fail.
sim/process.cc:
Fix comment.
sim/system.hh:
Struct member to hold the boot CPU's frequency.
sim/universe.cc:
remove unneeded variable.
--HG--
extra : convert_revision : 51efe4041095234bf458d9b3b0d417f4cae16fdc
cleaned up stability code and wrote some better help for stats.py
fixed sample bug in info.py
dev/ns_gige.cc:
dev/ns_gige.hh:
dev/sinic.cc:
dev/sinic.hh:
add total bandwidth/packets/bytes stats
util/stats/info.py:
fixed samples bug
util/stats/stats.py:
cleaned up stability code and wrote a bit better help
--HG--
extra : convert_revision : cae06f4fac744d7a51ee0909f21f03509151ea8f
which is evaluated slightly differently than in previous versions of gcc.
arch/alpha/alpha_linux_process.cc:
Alphabetize includes.
arch/alpha/vptr.hh:
Change the constants that are being used for alpha pagebytes to come from the ISA.
base/random.hh:
cpu/static_inst.cc:
sim/param.cc:
Fix up template syntax.
base/range.hh:
Include iostream for << operator.
base/res_list.hh:
base/statistics.hh:
cpu/simple_cpu/simple_cpu.hh:
cpu/static_inst.hh:
sim/eventq.hh:
sim/param.hh:
Fixup for templated code to resolve different scope lookup in gcc 3.4. This defers the lookup of the
function/variable until actual instantiation time by making it dependent on the templated class/function.
base/trace.cc:
Fix call to new.
base/trace.hh:
Fix up #define to have full path.
cpu/base_cpu.cc:
Fix up call to new.
dev/etherlink.hh:
dev/ns_gige.hh:
dev/sinic.hh:
Fixup for friend class/function declaration. g++ 3.4 no longer allows typedefs to be declared as
a friend class.
dev/pcidev.hh:
Fix up re-definition of access level to params.
kern/linux/linux_syscalls.hh:
kern/tru64/tru64_syscalls.hh:
Fix up header. Fix up template syntax.
sim/serialize.cc:
Include errno.h.
sim/startup.cc:
Change startupq. queue was getting destructed before all things had called ~StartupCallback(), which lead
to a segfault. This puts startupq in global space, and we allocate it ourselves. Other code may be similar
to this and may need changing in the future.
sim/syscall_emul.hh:
Include cpu/exec_context.hh and sim/process.hh, as forward declarations are no longer sufficient.
sim/universe.cc:
Include errno.h
--HG--
extra : convert_revision : e49d08ee89eb06a28351f02bafc028ca6652d5af
