See configs/test.py for test config (using simple
binary in my home directory on zizzer).
base/chunk_generator.hh:
Fix assertion for chunkSize == 0 (not a power of 2)
base/intmath.hh:
Fix roundDown to take integer alignments.
cpu/base.cc:
Register exec contexts regardless of state (not sure why
this check was in here in the first place).
mem/physical.cc:
Add breaks to switch.
python/m5/objects/BaseCPU.py:
Default mem to Parent.any (e.g. get from System).
python/m5/objects/Ethernet.py:
python/m5/objects/Root.py:
HierParams is gone.
python/m5/objects/PhysicalMemory.py:
mmu param is full-system only.
sim/process.cc:
Stack mapping request must be page-aligned and page-sized.
Don't delete objFile object in create since we are counting
on it being around for startup().
--HG--
extra : convert_revision : 90c43ee927e7d82a045d6e10302d965797d006f7
Ready to start testing if I could fix the linking errors I can't ever seem to fix.
cpu/simple/cpu.cc:
cpu/simple/cpu.hh:
Add connecting of ports until builder can handle it.
mem/physical.cc:
Add function to allocate a port in the object
Remove some full_sys stuff untill needed
mem/physical.hh:
Add function to allocate a port in the object
python/m5/objects/BaseCPU.py:
Update the params
sim/process.cc:
Make sure to use the right name (hopefully CPU constructor already called)
--HG--
extra : convert_revision : 4089caf20d7eb53e5463c8ac93ddce5e43ea5d85
mem/physical.cc:
Implement the blockSize function, return VMPageSize for the physical memory
mem/port.hh:
Add a function to get a pointer to a peer, needed for initVirtMem to work in the loader.
sim/process.cc:
The way the translating port is setup we don't want the memory port, we want the peer port associated with that memory. We may need to revisit this.
--HG--
extra : convert_revision : 46a51d448d1683db7bd5afe64adbe167a5743060
Also start compiling Simple CPU again.
SConscript:
Start Compiling Simple CPU as well
base/loader/aout_object.cc:
base/loader/aout_object.hh:
base/loader/ecoff_object.cc:
base/loader/ecoff_object.hh:
base/loader/elf_object.cc:
base/loader/elf_object.hh:
base/loader/object_file.hh:
sim/process.cc:
sim/process.hh:
Convert loaders to used translation port instead of proxy memory
--HG--
extra : convert_revision : 63275071f6a0e0d71935641205b203d94381ee44
Other compile issues cleaned up.
SConscript:
Changes to compile the new Translating Port.
Split out memtester and eio support, will rework them back in after first getting a simpleCPU to work
arch/alpha/alpha_linux_process.cc:
arch/alpha/alpha_tru64_process.cc:
sim/syscall_emul.cc:
sim/syscall_emul.hh:
Changes to use the new translating Port.
cpu/exec_context.cc:
cpu/exec_context.hh:
Create a translating port in each execution context.
sim/process.cc:
Fix the way we do proxy memory
--HG--
extra : convert_revision : 3d33218fe8b425a5d9ce24757f1112b4aa6001fd
fixing things, partly by ignoring CPU models
that don't currently compile.
SConscript:
Split sources for fast, simple, and o3 CPU models into
separate source lists. For now none of these are included
in the base source list, so you won't get any CPU models
at all... but we still can't compile the other stuff so
it's not an issue.
Also get rid of obsolete encumbered/mem file.
base/loader/aout_object.cc:
base/loader/aout_object.hh:
base/loader/ecoff_object.cc:
base/loader/ecoff_object.hh:
base/loader/elf_object.cc:
base/loader/elf_object.hh:
base/loader/object_file.hh:
cpu/exec_context.cc:
sim/process.cc:
sim/system.cc:
sim/system.hh:
FunctionalMemory -> Memory
cpu/pc_event.hh:
Get rid of unused badpc.
cpu/simple/cpu.cc:
cpu/simple/cpu.hh:
Move Port functions into .cc file.
mem/port.hh:
Make recvAddressRangesQuery panic by default instead
of being abstract... do CPUs need to implement this?
mem/request.hh:
Add prefetch flags.
sim/syscall_emul.hh:
Start to fix...
--HG--
extra : convert_revision : ece53b3855f20916caaa381598ac37e8c7adfba7
System object now exists for both fullsys and syscall emulation, as the
latter needs it so that Process objects can find the shared PhysicalMemory
for initialization.
Changes are incomplete: still need to fix up Process (& EioProcess) memory
initialization and syscall emulation code for new mem interface.
arch/alpha/alpha_linux_process.cc:
arch/alpha/alpha_linux_process.hh:
arch/alpha/alpha_tru64_process.cc:
arch/alpha/alpha_tru64_process.hh:
cpu/base.cc:
cpu/base.hh:
Take System argument in constructor.
cpu/exec_context.cc:
Take System argument in constructor.
Merge two constructors into a single one.
cpu/exec_context.hh:
Take System argument in constructor.
Merge two constructors into a single one.
Replace dummy translation with lookup in Process object's page table.
python/m5/objects/Process.py:
Add System parameter to Process object (& subobjects).
python/m5/objects/System.py:
Segregate full-system only Process parameters (most of them!).
sim/process.cc:
Take System argument in constructor.
Move initialization to startup() callback to occur after system & cpus
are initialized.
Generate ProxyMemory object to pass to loader for transparent
virtual page allocation.
sim/process.hh:
Take System argument in constructor.
Move initialization to startup() callback to occur after system & cpus
are initialized.
sim/system.cc:
sim/system.hh:
Enable System object for non-full-system too.
Basically involved putting most of the existing code
inside '#ifdef FULL_SYSTEM'.
Key thing needed for syscall emulation at this point is
the PhysicalMemory object (for Process initialization).
--HG--
extra : convert_revision : f0f34b47bd4f77b502191affd3d03b4d6d9bcdd8
needed in a few more cases.
base/intmath.hh:
align arg to roundUp should be int, not template class
sim/process.cc:
sim/syscall_emul.hh:
No need for explicit template arg now that roundUp is fixed.
--HG--
extra : convert_revision : f9f4639e022acb9f427e8d30d81c782504437c53
amazingly we never did that before. Caused us to run out of
file descriptors in twolf.
sim/process.cc:
Add free_fd() method to free closed target fd in simulator fd map.
Rename open_fd() to alloc_fd() for symmetry with free_fd().
sim/process.hh:
Add free_fd() method to free closed target fd in simulator fd map.
Rename open_fd() to alloc_fd() for symmetry with free_fd().
Crank up MAX_FD while we're at it.
sim/syscall_emul.cc:
Call free_fd() on process when target closes a file.
sim/syscall_emul.hh:
Process open_fd() renamed to alloc_fd().
--HG--
extra : convert_revision : d780f4ccfd5a0989230b0afbdbd276212b87550c
stay fixed even if the path to the binary changes, so the simulation results
are independent of that path.
--HG--
extra : convert_revision : d1109cd284466c14eddc97289908a51e771fc5db
build directory instead of being inferred from the name
of the build directory.
Options are passed to C++ via config/*.hh files instead of
via the command line. Build option flags are now always
defined to 0 or 1, so checks must use '#if' rather than
'#ifdef'.
SConscript:
MySQL detection moved to SConstruct.
Add config/*.hh files (via ConfigFile builder).
arch/alpha/alpha_memory.cc:
arch/alpha/ev5.cc:
arch/alpha/ev5.hh:
arch/alpha/isa_traits.hh:
base/fast_alloc.hh:
base/statistics.cc:
base/statistics.hh:
base/stats/events.cc:
base/stats/events.hh:
cpu/base.cc:
cpu/base.hh:
cpu/base_dyn_inst.cc:
cpu/base_dyn_inst.hh:
cpu/exec_context.cc:
cpu/exec_context.hh:
cpu/o3/alpha_cpu.hh:
cpu/o3/alpha_cpu_builder.cc:
cpu/o3/alpha_cpu_impl.hh:
cpu/o3/alpha_dyn_inst.hh:
cpu/o3/alpha_dyn_inst_impl.hh:
cpu/o3/alpha_params.hh:
cpu/o3/commit_impl.hh:
cpu/o3/cpu.cc:
cpu/o3/cpu.hh:
cpu/o3/fetch_impl.hh:
cpu/o3/iew.hh:
cpu/o3/iew_impl.hh:
cpu/o3/regfile.hh:
cpu/o3/rename_impl.hh:
cpu/o3/rob_impl.hh:
cpu/ozone/cpu.hh:
cpu/pc_event.cc:
cpu/simple/cpu.cc:
cpu/simple/cpu.hh:
sim/process.cc:
sim/process.hh:
Convert compile flags from def/undef to 0/1.
Set via #include config/*.hh instead of command line.
arch/alpha/isa_desc:
Convert compile flags from def/undef to 0/1.
Set via #include config/*.hh instead of command line.
Revamp fenv.h support... most of the ugliness is hidden
in base/fenv.hh now.
base/mysql.hh:
Fix typo in #ifndef guard.
build/SConstruct:
Build options are set via a build_options file in the
build directory instead of being inferred from the name
of the build directory.
Options are passed to C++ via config/*.hh files instead of
via the command line.
python/SConscript:
Generate m5_build_env directly from scons options
instead of indirectly via CPPDEFINES.
python/m5/convert.py:
Allow '0' and '1' for booleans.
Rewrite toBool to use dict.
base/fenv.hh:
Revamp <fenv.h> support to make it a compile option
(so we can test w/o it even if it's present) and to
make isa_desc cleaner.
--HG--
extra : convert_revision : 8f97dc11185bef5e1865b3269c7341df8525c9ad
CPU cycle ticks. This allows the user to have CPUs of different
frequencies, and also allows frequencies and latencies that are
not evenly divisible by the CPU frequency. For now, the CPU
frequency is still set to the global frequency, but soon, we'll
hopefully make the global frequency fixed at something like 1THz
and set all other frequencies independently.
arch/alpha/ev5.cc:
The cycles counter is based on the current cpu cycle.
cpu/base_cpu.cc:
frequency isn't the cpu parameter anymore, cycleTime is.
cpu/base_cpu.hh:
frequency isn't the cpu parameter anymore, cycleTime is.
create several public functions for getting the cpu frequency
and the numbers of ticks for a given number of cycles, etc.
cpu/memtest/memtest.cc:
cpu/simple_cpu/simple_cpu.cc:
cpu/simple_cpu/simple_cpu.hh:
cpu/trace/trace_cpu.cc:
Now that ticks aren't cpu cycles, fixup code to advance
by the proper number of ticks.
cpu/memtest/memtest.hh:
cpu/trace/trace_cpu.hh:
Provide a function to get the number of ticks for a given
number of cycles.
dev/alpha_console.cc:
Update for changes in the way that frequencies and latencies are
accessed. Move some stuff to init()
dev/alpha_console.hh:
Need a pointer to the system and the cpu to get the frequency
so we can pass the info to the console code.
dev/etherbus.cc:
dev/etherbus.hh:
dev/etherlink.cc:
dev/etherlink.hh:
dev/ethertap.cc:
dev/ide_disk.hh:
dev/ns_gige.cc:
dev/ns_gige.hh:
update for changes in the way bandwidths are passed from
python to C++ to accomidate the new way that ticks works.
dev/ide_disk.cc:
update for changes in the way bandwidths are passed from
python to C++ to accomidate the new way that ticks works.
Add some extra debugging printfs
dev/platform.cc:
dev/sinic.cc:
dev/sinic.hh:
outline the constructor and destructor
dev/platform.hh:
outline the constructor and destructor.
don't keep track of the interrupt frequency. Only provide the
accessor function.
dev/tsunami.cc:
dev/tsunami.hh:
outline the constructor and destructor
Don't set the interrupt frequency here. Get it from the actual device
that does the interrupting.
dev/tsunami_io.cc:
dev/tsunami_io.hh:
Make the interrupt interval a configuration parameter. (And convert
the interval to the new latency/frequency stuff in the python)
kern/linux/linux_system.cc:
update for changes in the way bandwidths are passed from
python to C++ to accomidate the new way that ticks works.
For now, we must get the boot cpu's frequency as a parameter
since allowing the system to have a pointer to the boot cpu would
cause a cycle.
kern/tru64/tru64_system.cc:
For now, we must get the boot cpu's frequency as a parameter
since allowing the system to have a pointer to the boot cpu would
cause a cycle.
python/m5/config.py:
Fix support for cycle_time relative latencies and frequencies.
Add support for getting a NetworkBandwidth or a MemoryBandwidth.
python/m5/objects/BaseCPU.mpy:
All CPUs now have a cycle_time. The default is the global frequency,
but it is now possible to set the global frequency to some large value
(like 1THz) and set each CPU frequency independently.
python/m5/objects/BaseCache.mpy:
python/m5/objects/Ide.mpy:
Make this a Latency parameter
python/m5/objects/BaseSystem.mpy:
We need to pass the boot CPU's frequency to the system
python/m5/objects/Ethernet.mpy:
Update parameter types to use latency and bandwidth types
python/m5/objects/Platform.mpy:
this frequency isn't needed. We get it from the clock interrupt.
python/m5/objects/Tsunami.mpy:
The clock generator should hold the frequency
sim/eventq.hh:
Need to remove this assertion because the writeback event
queue is different from the CPU's event queue which can cause
this assertion to fail.
sim/process.cc:
Fix comment.
sim/system.hh:
Struct member to hold the boot CPU's frequency.
sim/universe.cc:
remove unneeded variable.
--HG--
extra : convert_revision : 51efe4041095234bf458d9b3b0d417f4cae16fdc
arch/alpha/alpha_tru64_process.cc:
sim/process.cc:
sim/process.hh:
Add an address range for the nxm
sim/syscall_emul.hh:
Check to make sure that if we have an nxm config space that the mmap hasn't grown into it
--HG--
extra : convert_revision : e479e5240080ae488080d228bafea488835d6e77
arch/alpha/alpha_linux_process.cc:
arch/alpha/alpha_tru64_process.cc:
cpu/exec_context.hh:
sim/process.hh:
sim/syscall_emul.cc:
sim/syscall_emul.hh:
Changed all syscalls to use syscall return object
arch/alpha/isa_traits.hh:
Added syscall return object that packages return value and return
status into an object.
sim/process.cc:
renamed variable name to nm so base class function name() can be called
--HG--
extra : convert_revision : 6609c5ffecc9e3519d7a0cd160879fd21d54abfc
configuration so that we can always have binning on.
base/statistics.cc:
If we're binning, and there is no bin active at the time
we check all stats stuff, create a bin.
base/statistics.hh:
FS_MEASURE doesn't exist anymore
base/stats/text.cc:
don't print out bin names if there is only one bin
sim/process.cc:
don't zero stats. It happens automatically.
Don't activate the context at the time it is registered,
instead activate the first context in a startup callback.
sim/process.hh:
Add startup callback to initialize the first exec context
--HG--
extra : convert_revision : bcb23cdb184b0abf7cecd79902f8a59b50f71fe4
wierd ini files. The ini files are still used as an intermediate step,
but a sophisticated python library exists to help build them more
easily.
SConscript:
add the new embedded file stuff
remove all of the old object description junk
base/inifile.cc:
base/inifile.hh:
get rid of findDefault and findAppend since they were the source
of much evil.
base/trace.cc:
For now, if we don't have the dprintf_stream set up, dump
to standard out. We probably want a command line option
for this.
dev/alpha_console.cc:
PioDevice now takes a platform parameter.
All PioDevices must have a pio_latency parameter. We stick
a dummy parameter in here for now until we get rid of the
builder stuff.
dev/alpha_console.hh:
don't need Platform anymore
dev/baddev.cc:
PioDevice now takes a platform parameter.
All PioDevices must have a pio_latency parameter. We stick
a dummy parameter in here for now until we get rid of the
builder stuff. Same for the platform parameter, though we just
pass the PioDevice a null parameter since it isn't used by
this device and it's quicker.
dev/baddev.hh:
fix #include guards
dev/etherlink.cc:
rename parameters.
dev/ethertap.cc:
rename parameters
dev/ide_ctrl.cc:
All devices need an address even if it will get overwritten later.
dev/ide_disk.cc:
use an enum for the drive ID stuff.
rename disk_delay -> delay
Actually, I think that we should implement "cable select" and
have the controller tell the drive what it is.
dev/io_device.cc:
dev/io_device.hh:
All IO devices take a Platform *
dev/ns_gige.cc:
all devices need an io_bus. rename header_bus to io_bus
We don't need stuff for the interrupt controller since
it's all in the platform now.
dev/ns_gige.hh:
We don't need stuff for the interrupt controller now since
it's all in the platform.
dev/pciconfigall.cc:
Pass a dummy NULL to the PioDevice for the platform since
we don't need one.
dev/pcidev.cc:
Move a bunch of common functionality into the PciDev
dev/platform.hh:
remove unneeded code
dev/tsunami.cc:
remove unused param
dev/tsunami_cchip.cc:
pass platform pointer
dev/tsunami_io.cc:
dev/tsunami_pchip.cc:
dev/uart.cc:
pass platform variable
dev/uart.hh:
don't need to keep a platform pointer. it's in the base class
kern/linux/linux_system.cc:
kern/tru64/tru64_system.cc:
rename some parameters
sim/builder.cc:
clean up builder code. use more parameters from the
config node. all sections with a type= are now created,
the old mechanisms no longer work
sim/builder.hh:
remove some extra variables since they are found in the ConfigNode
sim/main.cc:
add a quick hack command line argument -X to dump out the
embedded files. (probably should be fixed up a little.)
accept .mpy files
printing to the streams has to happen after the hierarchy
is built since we're moving away from param contexts
sim/param.cc:
add parsing support for ranges
sim/process.cc:
isValid isn't very useful anymore. interpret the names
stdout, stderr, cout, cerr for the file descriptors
sim/pyconfig/SConscript:
Add Action handlers for creating an embedded python file
and for creating an embedded C file.
use these action handlers to embed all objects found in the objects
tree into the binary along with the importer and the m5config stuff
sim/pyconfig/m5config.py:
Major changes to the original configuration file generator. These
changes largely involve implementing copy-on-write like semantics
for all of the SimObjects. Real documentation must be written.
sim/universe.cc:
Universe becomes a SimObject since we don't really have the notion of
param contexts in the python code.
--HG--
rename : sim/pyconfig/m5configbase.py => sim/pyconfig/m5config.py
extra : convert_revision : c353453e5beb91c37f15755998fc0d8858c6829a
Simple text list of symbol (or address) and count
will be dumped to m5prof.<cpu-name> if the cpu's
pc_sample_interval param is set.
SConscript:
Add cpu/full_cpu/pc_sample_profile.cc
base/callback.hh:
Add a comment about MakeCallback.
Fix type in another comment.
base/loader/symtab.cc:
Revamp findNearestSymbol() to provide addresses of both
nearest symbols (preceding and following) as well as
string for former.
Move global definition of debugSymbolTable here too.
base/loader/symtab.hh:
Revamp findNearestSymbol() to provide addresses of both
nearest symbols (preceding and following) as well as
string for former.
Move global declaration of debugSymbolTable here too.
cpu/exetrace.cc:
Use new findNearestSymbol() interface for trace symbols.
kern/linux/linux_system.cc:
sim/system.cc:
Remove extern of debugSymbolTable (now in symtab.hh)
sim/process.cc:
Initialize debugSymbolTable if binary has a symbol table.
--HG--
extra : convert_revision : 0b5393dc39c40ac88c953684708f1125da550671
single place so it's easier to work with.
- Add support for binning kernel/user/idle time separately from
lisa's binning stuff, but make the two compatible.
- KernelStats used to directly implement the pImpl idiom, but
it makes more sense to just remove the level of indirection and
make the exec context have a pointer to the stats.
- Factor common code out of LinuxSystem and Tru64System and put
it into the System base class. While doing that, make all
constructors take a pointer to a parameter struct instead of
naming the parameters individually to make it much easier to add
parameters to these classes.
SConscript:
Move the function tracking and binning stuff around.
arch/alpha/ev5.cc:
kernelStats is now a pointer
arch/alpha/pseudo_inst.cc:
kernelStats is now a pointer
the parameters to the system have been moved into their own
struct
base/trace.hh:
provide a little functor class for wrapping a string that
can allow you to define name() in any scope very simply
for use with DPRINTF
cpu/base_cpu.cc:
New order of arguments for consistency.
cpu/exec_context.cc:
kernelStats no longer has the level of indirection in it,
execContext has the indirection now. so, kernelStats is a pointer.
We also need a pointer to the kernelBinning stuff from the system
and we need to figure out if we want to do binning or not.
Move a whole bunch of code into kern_binning.cc so it's all
in the same place.
cpu/exec_context.hh:
We want pointers to the kernel binning/stats stuff and we'll
have the exec_context and system have the level of indirection
instead of having the extra layer in the kernel stats class.
cpu/simple_cpu/simple_cpu.cc:
call through the exec context to do the special binning
stuff.
kern/kernel_stats.cc:
kern/kernel_stats.hh:
Re-organize the stats stuff and remove the level of indirection
(that was there to simplify building) and move the binning stuff
into its own class/file.
kern/linux/linux_system.cc:
kern/linux/linux_system.hh:
kern/tru64/tru64_system.cc:
kern/tru64/tru64_system.hh:
sim/system.cc:
sim/system.hh:
move lots of common system code into the base system class so
that it can be shared between linux, tru64, and whatever else
we decide to support in the future.
Make the constructor take a pointer to a parameter struct so that
it is easier to pass parameters to the parent.
kern/system_events.cc:
move the majority of the binning code into the Kernel::Binning class
in the kern_binning file
kern/system_events.hh:
FnEvents only need to know the bin
create the Idle start event to find the PCBB of the idle
process when it starts.
kern/tru64/tru64_events.cc:
memCtrl -> memctrl
sim/process.cc:
sim/process.hh:
re-order args for consistency
--HG--
extra : convert_revision : 86cb39738c41fcd680f2aad125c9dde000227b2b
Add support for generic visitors for stats and use them
to implement independent output functions.
Support for mysql output and some initial code for hacking
on mysql output with python
arch/alpha/pseudo_inst.cc:
base/hybrid_pred.cc:
base/hybrid_pred.hh:
base/sat_counter.cc:
base/sat_counter.hh:
cpu/simple_cpu/simple_cpu.cc:
kern/tru64/tru64_events.cc:
sim/main.cc:
sim/process.cc:
sim/process.hh:
sim/sim_events.cc:
sim/sim_object.cc:
sim/system.hh:
update for changes in stats package
base/statistics.cc:
move the python output code to base/stats/puthon.(cc|hh)
and reimplement it as a visitor.
move the text output code to base/stats/text.(cc|hh) and
reimplement it as a visitor.
move the database stuff into base/stats/statdb.(cc|hh) and
get rid of the class. Put everything as globals in the
Statistics::Database namespace.
allocate unique ids for all stats.
directly implement the check routine and get rid of the
various dumping routines since they're now in separate files.
make sure that no two stats have the same name
clean up some loops
base/statistics.hh:
major changes to the statistics package again
lots of code was factored out of statistics.hh into several
separate files in base/stats/ (this will continue)
There are now two Stat package types Result and Counter that
are specified to allow the user to keep the counted type
separate from the result type. They are currently both doubles
but that's an experiment. There is no more per stat ability to
set the type. Statistics::Counter is not the same as Counter!
Implement a visitor for statistics output so that new output
types can be implemented independently from the stats package
itself.
Add a unique id to each stat so that it can be used to keep
track of stats more simply. This number can also be used in
debugging problems with stats.
Tweak the bucket size stuff a bit to make it work better.
fixed VectorDist size bug
cpu/memtest/memtest.cc:
Fix up for changes in stats package
Don't use value() since it doesn't work with binning. If you
want a number as a stat, and to use it in the program itself,
you really want two separate variables, one that's a stat,
and one that's not.
cpu/memtest/memtest.hh:
Fix up for changes in stats package
test/Makefile:
Try to build stuff now that directories matter
test/stattest.cc:
test all new output types
choose which one with command line options
--HG--
extra : convert_revision : e3a3f5f0828c67c0e2de415d936ad240adaddc89
configuration unnecessarily awkward. Biggest changes are:
- External and internal object names now match in all cases. The
macros still allow them to be different; the only reason I didn't
get rid of that is that the macros themselves should be going away
soon. In the few conflicting cases, I sometimes renamed the C++ object
and sometimes renamed the config object. The latter sets of substitions
are:
s/BaseBus/Bus/;
s/MemoryObject/FunctionalMemory/;
s/MemoryControl/MemoryController/;
s/FUPool/FuncUnitPool/;
- SamplingCPU is temporarily broken... we need to change the model
of how this works in the .ini file. Having it as a CPU proxy is
really awkward.
arch/alpha/alpha_memory.cc:
arch/alpha/alpha_memory.hh:
cpu/simple_cpu/simple_cpu.cc:
sim/process.cc:
Rename objects to match config name.
cpu/base_cpu.cc:
Uncomment SimObject define since SamplingCPU no longer
does this for us.
dev/ethertap.cc:
Use unsigned instead of uint16_t for params.
kern/tru64/tru64_system.cc:
Use unsigned instead of uint64_t for init_param param.
test/paramtest.cc:
Fix old SimObjectParam.
--HG--
extra : convert_revision : 378ebbc6a71ad0694501d09979a44d111a59e8dc
on various platforms.
base/hashmap.hh:
gcc on Alpha doesn't always define __LP64__,
even though it arguably should.
cpu/exec_context.cc:
Clear register file on non-full-system too (even though
it typically gets overwritten by the initial regs from
the Process object).
sim/process.cc:
Clear initial register copy in Process object.
Not all regs get initialized when the executable is loaded.
--HG--
extra : convert_revision : f1fe4734a5ea81331d70994cb5284b1e9db0dceb
a checkpoint now gives identical results to running from scratch
and doing at switchover at the same cycle!
- CPUs start at cycle 0 again, not cycle 1.
- curTick is now serialized & unserialized.
- Stats get reset in main (before event loop). Since this is done
after curTick is unserialized, simTicks gets set correctly for
running from a checkpoint.
- Simplify serialization to happen in a single pass.
- s/Serializeable/Serializable/
arch/alpha/isa_traits.hh:
dev/etherlink.hh:
sim/eventq.cc:
sim/eventq.hh:
s/Serializeable/Serializable/
kern/tru64/tru64_system.cc:
sim/process.cc:
Make initial CPU activation on cycle 0 again (not 1).
sim/main.cc:
Reset stats before getting started.
Make error message on falling out of event loop
more meaningful.
sim/serialize.cc:
sim/serialize.hh:
Get rid of now-useless initial pass; serialization is
done in a single pass now.
Serialize & unserialize curTick.
Wrap curTick and mainEventQueue in a "globals" Serializable object.
s/Serializeable/Serializable/
sim/sim_object.cc:
Add static function to serialize all SimObjects.
sim/sim_object.hh:
Add static function to serialize all SimObjects.
s/Serializeable/Serializable/
--HG--
extra : convert_revision : 9dcc411d0009b54b8eb61c3a509680b81b9f6f68
and SimpleCPU::setStatus() into separate functions. For example,
setStatus(Active) is now activate().
--HG--
extra : convert_revision : 4392e07caf6c918db0b535f613175109681686fe
interfaces, and specific support for Alpha Linux. Split syscall emulation
functions into several groups, based on whether they depend on the specific
OS and/or architecture (and all combinations of above), including the use of
template functions to support syscalls with slightly different constants
or interface structs.
arch/alpha/alpha_tru64_process.cc:
Incorporate full Tru64 object definition here, including structure and constant definitions.
This way we can wrap all of the functions inside the object, and not worry about namespace
conflicts because no one outside this file will ever see it.
base/loader/aout_object.cc:
base/loader/aout_object.hh:
base/loader/ecoff_object.cc:
base/loader/ecoff_object.hh:
base/loader/elf_object.cc:
base/loader/elf_object.hh:
base/loader/object_file.cc:
base/loader/object_file.hh:
Add enums to ObjectFile to indicate the object's architecture and operating system.
cpu/exec_context.cc:
prog.hh is now process.hh
cpu/exec_context.hh:
prog.hh is now process.hh
move architecture-specific syscall arg accessors into ExecContext
cpu/simple_cpu/simple_cpu.cc:
No need to include prog.hh (which has been renamed)
sim/process.cc:
sim/process.hh:
LiveProcess is now effectively an abstract base class.
New LiveProcess::create() function takes an object file and dynamically picks the
appropriate subclass of LiveProcess to handle the syscall interface that file expects
(currently Tru64 or Linux).
--HG--
rename : arch/alpha/fake_syscall.cc => arch/alpha/alpha_tru64_process.cc
rename : sim/prog.cc => sim/process.cc
rename : sim/prog.hh => sim/process.hh
extra : convert_revision : 4a03ca7d94a34177cb672931f8aae83a6bad179a
