wierd ini files. The ini files are still used as an intermediate step,
but a sophisticated python library exists to help build them more
easily.
SConscript:
add the new embedded file stuff
remove all of the old object description junk
base/inifile.cc:
base/inifile.hh:
get rid of findDefault and findAppend since they were the source
of much evil.
base/trace.cc:
For now, if we don't have the dprintf_stream set up, dump
to standard out. We probably want a command line option
for this.
dev/alpha_console.cc:
PioDevice now takes a platform parameter.
All PioDevices must have a pio_latency parameter. We stick
a dummy parameter in here for now until we get rid of the
builder stuff.
dev/alpha_console.hh:
don't need Platform anymore
dev/baddev.cc:
PioDevice now takes a platform parameter.
All PioDevices must have a pio_latency parameter. We stick
a dummy parameter in here for now until we get rid of the
builder stuff. Same for the platform parameter, though we just
pass the PioDevice a null parameter since it isn't used by
this device and it's quicker.
dev/baddev.hh:
fix #include guards
dev/etherlink.cc:
rename parameters.
dev/ethertap.cc:
rename parameters
dev/ide_ctrl.cc:
All devices need an address even if it will get overwritten later.
dev/ide_disk.cc:
use an enum for the drive ID stuff.
rename disk_delay -> delay
Actually, I think that we should implement "cable select" and
have the controller tell the drive what it is.
dev/io_device.cc:
dev/io_device.hh:
All IO devices take a Platform *
dev/ns_gige.cc:
all devices need an io_bus. rename header_bus to io_bus
We don't need stuff for the interrupt controller since
it's all in the platform now.
dev/ns_gige.hh:
We don't need stuff for the interrupt controller now since
it's all in the platform.
dev/pciconfigall.cc:
Pass a dummy NULL to the PioDevice for the platform since
we don't need one.
dev/pcidev.cc:
Move a bunch of common functionality into the PciDev
dev/platform.hh:
remove unneeded code
dev/tsunami.cc:
remove unused param
dev/tsunami_cchip.cc:
pass platform pointer
dev/tsunami_io.cc:
dev/tsunami_pchip.cc:
dev/uart.cc:
pass platform variable
dev/uart.hh:
don't need to keep a platform pointer. it's in the base class
kern/linux/linux_system.cc:
kern/tru64/tru64_system.cc:
rename some parameters
sim/builder.cc:
clean up builder code. use more parameters from the
config node. all sections with a type= are now created,
the old mechanisms no longer work
sim/builder.hh:
remove some extra variables since they are found in the ConfigNode
sim/main.cc:
add a quick hack command line argument -X to dump out the
embedded files. (probably should be fixed up a little.)
accept .mpy files
printing to the streams has to happen after the hierarchy
is built since we're moving away from param contexts
sim/param.cc:
add parsing support for ranges
sim/process.cc:
isValid isn't very useful anymore. interpret the names
stdout, stderr, cout, cerr for the file descriptors
sim/pyconfig/SConscript:
Add Action handlers for creating an embedded python file
and for creating an embedded C file.
use these action handlers to embed all objects found in the objects
tree into the binary along with the importer and the m5config stuff
sim/pyconfig/m5config.py:
Major changes to the original configuration file generator. These
changes largely involve implementing copy-on-write like semantics
for all of the SimObjects. Real documentation must be written.
sim/universe.cc:
Universe becomes a SimObject since we don't really have the notion of
param contexts in the python code.
--HG--
rename : sim/pyconfig/m5configbase.py => sim/pyconfig/m5config.py
extra : convert_revision : c353453e5beb91c37f15755998fc0d8858c6829a
SConscript:
compile the random number generator stuff into m5
base/random.cc:
we need to define our destructor
base/random.hh:
Since there's no state, just makes all of these get functions static
--HG--
extra : convert_revision : 9d4b8abd57367391a8ecda3914b1d912d9c64185
Simple text list of symbol (or address) and count
will be dumped to m5prof.<cpu-name> if the cpu's
pc_sample_interval param is set.
SConscript:
Add cpu/full_cpu/pc_sample_profile.cc
base/callback.hh:
Add a comment about MakeCallback.
Fix type in another comment.
base/loader/symtab.cc:
Revamp findNearestSymbol() to provide addresses of both
nearest symbols (preceding and following) as well as
string for former.
Move global definition of debugSymbolTable here too.
base/loader/symtab.hh:
Revamp findNearestSymbol() to provide addresses of both
nearest symbols (preceding and following) as well as
string for former.
Move global declaration of debugSymbolTable here too.
cpu/exetrace.cc:
Use new findNearestSymbol() interface for trace symbols.
kern/linux/linux_system.cc:
sim/system.cc:
Remove extern of debugSymbolTable (now in symtab.hh)
sim/process.cc:
Initialize debugSymbolTable if binary has a symbol table.
--HG--
extra : convert_revision : 0b5393dc39c40ac88c953684708f1125da550671
through the following phases.
1) Construct all param contexts
2) Call the checkParams() on each context
3) Build the configuration hierarchy
4) Construct all SimObjects
5) Initialize all SimObjects by calling init() on each one
6) Unserialize the checkpoint
7) Register all statisitcs
8) Check validity of all statistics (after that, no new stats)
9) Reset all stats.
10) Call SimStartup() which calls startup() on all SimObjects,
ParamContexts, and any other object deriving from StartupCallback
SConscript:
no more SimInit() we have SimStartup() now
sim/param.hh:
Make all params have a startup callback.
sim/sim_events.cc:
the init callbacks no longer exist. We can simplify code by
using startup().
sim/sim_object.hh:
Make all SimObjects derive from StartupCallback
--HG--
extra : convert_revision : ab81e259eb5510cc597f7bacb2bfb619fb4cc15f
SConscript:
targetarch is only for headers, not cc files. move all cc files
back to arch/alpha, and make the target arch directory do this
echo '#include "arch/alpha/foo.hh"' > targetarch/foo.hh for every
header file. This works a lot better and doesn't kill emacs'
ability to parse compile outputs
--HG--
extra : convert_revision : c1d51643bdc457ae2d96c5f50d3ef1c6a58a600d
instead of using symlink. The symlink broke scons's built-in include
dependency tacking.
Interestingly once it was fixed scons discovered two circular dependency
problems which are also fixed now.
SConscript:
Make targetarch directory in build tree and copy arch/alpha files to it
instead of using symlink. The symlink broke scons's built-in include
dependency tacking.
arch/alpha/ev5.hh:
Get rid of circular #include dependence.
kern/kernel_stats.cc:
Add needed header file.
kern/linux/linux_syscalls.hh:
kern/tru64/tru64_syscalls.hh:
Replace targetarch/syscalls.hh with single template class declaration.
--HG--
extra : convert_revision : b8551623c1d441c6eb8d0651387e97e373128814
code
arch/alpha/alpha_memory.cc:
Fixed unaligned trap faults
arch/alpha/ev5.cc:
little more verbose faulting information
kern/linux/linux_system.cc:
more descriptive errors, and the correct offsets from symbols
sim/system.cc:
load local pal symbols
--HG--
extra : convert_revision : 0c81badf77321d5e1a060dcae2d42204e5a1fc84
libdnet when we can instead of our own home grown stuff.
SConscript:
separate the crc code into its own file
base/inet.cc:
move the crc stuff to crc.cc
add generic code for calculating ip/tcp/udp checksums
base/inet.hh:
- move crc stuff to crc.hh
- #include all of the libdnet stuff. (this makes base/inet.hh the
only file you need to include if you want to use this kind of stuff.)
- Wrap some of the libdnet structs to get easier access to structure
members. These wrappers will automatically deal with masking/shifting/
byte-swapping.
base/refcnt.hh:
If one derives from RefCountingPtr, they should have access to
the internal data pointer.
build/SConstruct:
make #include of dnet stuff work
dev/etherlink.cc:
dev/ethertap.cc:
dev/ethertap.hh:
EtherPacket -> PacketData
dev/etherpkt.cc:
EtherPacket -> PacketData
add a function for populating extra info about a packet.
Basically just gives pointers to ethernet/ip/tcp/udp headers
if they exist.
dev/etherpkt.hh:
EtherPacket -> PacketData
remove most of the packet header stuff from teh PacketData
class and just add a few generic functions for grabbing various
headers that may exist in the packet. The old functionality is
contained in the headers.
dev/ns_gige.cc:
- IP -> Ip, UDP -> Udp, TCP ->Tcp when used in variable names
- get rid of our own byte swapping functions.
- whack checksum code and use libdnet version.
- Get pointers to the various packet headers and grab info from
those headers. (The byte swapping in the headers now.)
- Add stats for Udp Checksums
dev/ns_gige.hh:
use libdnet for checksum code.
IP -> Ip, TCP -> Tcp in variable names
add stats for UDP checksums
--HG--
extra : convert_revision : 96c4160e1967b7c0090acd456df4a76e1f3aab53
always build with dynamic libraries for mysqlclient
SConscript:
always use dynamic library now
cpu/pc_event.hh:
cleared lower 2 bits, since everything must be 4byte aligned
--HG--
extra : convert_revision : 332ecd25a598e6a46a79bd653449aa7eb22a580a
SConscript:
Add build support for ITX trace writer
cpu/trace/reader/itx_reader.cc:
Handle full 36 bit physical addressses.
cpu/trace/reader/itx_reader.hh:
Need a string header file here
cpu/trace/trace_cpu.cc:
cpu/trace/trace_cpu.hh:
Modify trace CPU to take a single trace and drive an instruction and data interfaces.
--HG--
extra : convert_revision : 4c81f2f9d9341df41f0ae45e4bda49800a43977c
single place so it's easier to work with.
- Add support for binning kernel/user/idle time separately from
lisa's binning stuff, but make the two compatible.
- KernelStats used to directly implement the pImpl idiom, but
it makes more sense to just remove the level of indirection and
make the exec context have a pointer to the stats.
- Factor common code out of LinuxSystem and Tru64System and put
it into the System base class. While doing that, make all
constructors take a pointer to a parameter struct instead of
naming the parameters individually to make it much easier to add
parameters to these classes.
SConscript:
Move the function tracking and binning stuff around.
arch/alpha/ev5.cc:
kernelStats is now a pointer
arch/alpha/pseudo_inst.cc:
kernelStats is now a pointer
the parameters to the system have been moved into their own
struct
base/trace.hh:
provide a little functor class for wrapping a string that
can allow you to define name() in any scope very simply
for use with DPRINTF
cpu/base_cpu.cc:
New order of arguments for consistency.
cpu/exec_context.cc:
kernelStats no longer has the level of indirection in it,
execContext has the indirection now. so, kernelStats is a pointer.
We also need a pointer to the kernelBinning stuff from the system
and we need to figure out if we want to do binning or not.
Move a whole bunch of code into kern_binning.cc so it's all
in the same place.
cpu/exec_context.hh:
We want pointers to the kernel binning/stats stuff and we'll
have the exec_context and system have the level of indirection
instead of having the extra layer in the kernel stats class.
cpu/simple_cpu/simple_cpu.cc:
call through the exec context to do the special binning
stuff.
kern/kernel_stats.cc:
kern/kernel_stats.hh:
Re-organize the stats stuff and remove the level of indirection
(that was there to simplify building) and move the binning stuff
into its own class/file.
kern/linux/linux_system.cc:
kern/linux/linux_system.hh:
kern/tru64/tru64_system.cc:
kern/tru64/tru64_system.hh:
sim/system.cc:
sim/system.hh:
move lots of common system code into the base system class so
that it can be shared between linux, tru64, and whatever else
we decide to support in the future.
Make the constructor take a pointer to a parameter struct so that
it is easier to pass parameters to the parent.
kern/system_events.cc:
move the majority of the binning code into the Kernel::Binning class
in the kern_binning file
kern/system_events.hh:
FnEvents only need to know the bin
create the Idle start event to find the PCBB of the idle
process when it starts.
kern/tru64/tru64_events.cc:
memCtrl -> memctrl
sim/process.cc:
sim/process.hh:
re-order args for consistency
--HG--
extra : convert_revision : 86cb39738c41fcd680f2aad125c9dde000227b2b
SConscript:
Make the mysql stuff work.
Add specific support to statically link in the mysql client on
linux machines so that we don't need to worry about what's
installed on the pool.
--HG--
extra : convert_revision : 2317c3163cefc8e4d857929e313afd53c616e2a5
shared build and one for the per-config header file
copying.
SConscript:
Just include libelf/SConscript-local.
build/SConstruct:
Include libelf/SConscript-global.
--HG--
extra : convert_revision : 0a4ae8f1514819f99fec101b898c19dabd4d59bd
SConscript:
Add pyconfig/{pyconfig,code}.cc
Add list of object description (.od) files.
Include pyconfig/SConscript.
base/inifile.cc:
Get rid of CPP_PIPE... it never really worked anyway.
base/inifile.hh:
Make load(ifstream&) method public so pyconfig
code can call it.
sim/main.cc:
Handle Python config scripts (end in '.py' instead of '.ini').
sim/pyconfig/m5configbase.py:
Add license.
Fix minor __setattr__ problem (2.3 related?)
--HG--
rename : util/config/m5configbase.py => sim/pyconfig/m5configbase.py
extra : convert_revision : 5e004922f950bfdefced333285584b80ad7ffb83
headers get created in build tree (under build/FOO/libelf)
instead of source tree (m5/libelf).
SConscript:
Move libelf/SConscript include here.
build/SConstruct:
Get rid of libelf/SConscript include (moved to
m5/SConscript).
--HG--
extra : convert_revision : c0acb3bab2afa5079748b907c5917f548582099e
SConscript:
grrr, spent half an hour looking for why the linker was dying. needed to include the new file printk.cc
--HG--
extra : convert_revision : 4c461d9dbe96e94d7c312bf71ee8ad4c87a3b1a1
be more easily re-used. This currently uses some cooked up matching
function that I wrote a while ago, but should probably be changed
to use regular expressions in the future.
add doDebugBreak to control breakpoints on a per SimObject basis
SConscript:
add match
base/stats/events.cc:
base/trace.cc:
Move the object matching code into a separate file so it can be
more easily shared
base/trace.hh:
the object matching code was wrapped up and moved. adapt.
sim/sim_object.cc:
add the doDebugBreak flag that can be set on a per-SimObject
basis. This will be used in the future to control whether or
not debug_break() will actually break for a given object.
provide a function interface that can be called from the debugger.
sim/sim_object.hh:
add the doDebugBreak flag that can be set on a per-SimObject
basis. This will be used in the future to control whether or
not debug_break() will actually break for a given object.
--HG--
extra : convert_revision : 6bf7924de63d41f5ba6b80d579efdf26ba265a8f
Make decoder.cc/hh depend on isa_parser.py.
SConscript:
Make decoder.cc/hh depend on isa_parser.py.
--HG--
extra : convert_revision : ff575d7f819da951423b36275e960fed652f9b2b
SConscript:
add these files for partitioned caches
base/traceflags.py:
add Split as a traceflag
--HG--
extra : convert_revision : 6aa8f7c389ee1145b33be006c820236f11f5397c
SConscript:
THIS is why the regression keeps failing. it's missing the the etherbus file in the sconscript.
--HG--
extra : convert_revision : adbcfb6036d8e8ecb51c4f484d0030059542684b
'cd build; scons' will build ALPHA/m5.debug.
Use e.g. 'scons KERNEL/m5.opt' to build other binaries.
Read the comments in build/SConstruct for more details.
base/traceflags.py:
Take basename of generated cc/hh files from command line instead
of hardwiring them. Lets us call the script from a different
directory and still have the files end up in the right place
(e.g. "base/traceflags.py base/traceflags").
--HG--
extra : convert_revision : ee4dbb59040cf07590929275f6c1c01e8d4e00b4
