gem5/system/alpha/palcode/osfpal.S

/*
 * Copyright (c) 2003-2006 The Regents of The University of Michigan
 * Copyright (c) 1992-1995 Hewlett-Packard Development Company
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are
 * met: redistributions of source code must retain the above copyright
 * notice, this list of conditions and the following disclaimer;
 * redistributions in binary form must reproduce the above copyright
 * notice, this list of conditions and the following disclaimer in the
 * documentation and/or other materials provided with the distribution;
 * neither the name of the copyright holders nor the names of its
 * contributors may be used to endorse or promote products derived from
 * this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 * Authors: Ali G. Saidi
 *          Nathan L. Binkert
 */

// modified to use the Hudson style "impure.h" instead of ev5_impure.sdl
// since we don't have a mechanism to expand the data structures.... pb Nov/95
#include "ev5_defs.h"
#include "ev5_impure.h"
#include "ev5_alpha_defs.h"
#include "ev5_paldef.h"
#include "ev5_osfalpha_defs.h"
#include "fromHudsonMacros.h"
#include "fromHudsonOsf.h"
#include "dc21164FromGasSources.h"

#define DEBUGSTORE(c) nop

#define DEBUG_EXC_ADDR()\
        bsr	r25, put_exc_addr; \
        DEBUGSTORE(13)		; \
        DEBUGSTORE(10)

// This is the fix for the user-mode super page references causing the
// machine to crash.
#define hw_rei_spe	hw_rei

#define vmaj 1
#define vmin 18
#define vms_pal 1
#define osf_pal 2
#define pal_type osf_pal
#define osfpal_version_l ((pal_type<<16) | (vmaj<<8) | (vmin<<0))


///////////////////////////
// PALtemp register usage
///////////////////////////

//  The EV5 Ibox holds 24 PALtemp registers.  This maps the OSF PAL usage
//  for these PALtemps:
//
//	pt0   local scratch
//	pt1   local scratch
//	pt2   entUna					pt_entUna
//	pt3   CPU specific impure area pointer		pt_impure
//	pt4   memory management temp
//	pt5   memory management temp
//	pt6   memory management temp
//	pt7   entIF					pt_entIF
//	pt8   intmask					pt_intmask
//	pt9   entSys					pt_entSys
//	pt10
//	pt11  entInt					pt_entInt
//	pt12  entArith					pt_entArith
//	pt13  reserved for system specific PAL
//	pt14  reserved for system specific PAL
//	pt15  reserved for system specific PAL
//	pt16  MISC: scratch ! WHAMI<7:0> ! 0 0 0 MCES<4:0> pt_misc, pt_whami,
//                pt_mces
//	pt17  sysval					pt_sysval
//	pt18  usp					pt_usp
//	pt19  ksp					pt_ksp
//	pt20  PTBR					pt_ptbr
//	pt21  entMM					pt_entMM
//	pt22  kgp					pt_kgp
//	pt23  PCBB					pt_pcbb
//
//


/////////////////////////////
// PALshadow register usage
/////////////////////////////

//
// EV5 shadows R8-R14 and R25 when in PALmode and ICSR<shadow_enable> = 1.
// This maps the OSF PAL usage of R8 - R14 and R25:
//
// 	r8    ITBmiss/DTBmiss scratch
// 	r9    ITBmiss/DTBmiss scratch
// 	r10   ITBmiss/DTBmiss scratch
//	r11   PS
//	r12   local scratch
//	r13   local scratch
//	r14   local scratch
//	r25   local scratch
//



// .sbttl	"PALcode configuration options"

// There are a number of options that may be assembled into this version of
// PALcode. They should be adjusted in a prefix assembly file (i.e. do not edit
// the following). The options that can be adjusted cause the resultant PALcode
// to reflect the desired target system.

// multiprocessor support can be enabled for a max of n processors by
// setting the following to the number of processors on the system.
// Note that this is really the max cpuid.

#define max_cpuid 1
#ifndef max_cpuid
#define max_cpuid 8
#endif

#define osf_svmin 1
#define osfpal_version_h ((max_cpuid<<16) | (osf_svmin<<0))

//
// RESET	-  Reset Trap Entry Point
//
// RESET - offset 0000
// Entry:
//	Vectored into via hardware trap on reset, or branched to
//	on swppal.
//
//	r0 = whami
//	r1 = pal_base
//	r2 = base of scratch area
//	r3 = halt code
//
//
// Function:
//
//

        .text	0
        . = 0x0000
        .globl _start
        .globl Pal_Base
_start:
Pal_Base:
        HDW_VECTOR(PAL_RESET_ENTRY)
Trap_Reset:
        nop
        /*
         * store into r1
         */
        br r1,sys_reset

        // Specify PAL version info as a constant
        // at a known location (reset + 8).

        .long osfpal_version_l		// <pal_type@16> ! <vmaj@8> ! <vmin@0>
        .long osfpal_version_h		// <max_cpuid@16> ! <osf_svmin@0>
        .long 0
        .long 0
pal_impure_start:
        .quad 0
pal_debug_ptr:
        .quad 0				// reserved for debug pointer ; 20


//
// IACCVIO - Istream Access Violation Trap Entry Point
//
// IACCVIO - offset 0080
// Entry:
//	Vectored into via hardware trap on Istream access violation or sign check error on PC.
//
// Function:
//	Build stack frame
//	a0 <- Faulting VA
//	a1 <- MMCSR  (1 for ACV)
//	a2 <- -1 (for ifetch fault)
//	vector via entMM
//

        HDW_VECTOR(PAL_IACCVIO_ENTRY)
Trap_Iaccvio:
        DEBUGSTORE(0x42)
        sll	r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit
        mtpr	r31, ev5__ps		// Set Ibox current mode to kernel

        bis	r11, r31, r12		// Save PS
        bge	r25, TRAP_IACCVIO_10_		// no stack swap needed if cm=kern


        mtpr	r31, ev5__dtb_cm	// Set Mbox current mode to kernel -
                                        //     no virt ref for next 2 cycles
        mtpr	r30, pt_usp		// save user stack

        bis	r31, r31, r12		// Set new PS
        mfpr	r30, pt_ksp

TRAP_IACCVIO_10_:
        lda	sp, 0-osfsf_c_size(sp)// allocate stack space
        mfpr	r14, exc_addr		// get pc

        stq	r16, osfsf_a0(sp)	// save regs
        bic	r14, 3, r16		// pass pc/va as a0

        stq	r17, osfsf_a1(sp)	// a1
        or	r31, mmcsr_c_acv, r17	// pass mm_csr as a1

        stq	r18, osfsf_a2(sp) 	// a2
        mfpr	r13, pt_entmm		// get entry point

        stq	r11, osfsf_ps(sp)	// save old ps
        bis	r12, r31, r11		// update ps

        stq	r16, osfsf_pc(sp)	// save pc
        stq	r29, osfsf_gp(sp) 	// save gp

        mtpr	r13, exc_addr		// load exc_addr with entMM
                                        // 1 cycle to hw_rei
        mfpr	r29, pt_kgp		// get the kgp

        subq	r31, 1, r18		// pass flag of istream, as a2
        hw_rei_spe


//
// INTERRUPT - Interrupt Trap Entry Point
//
// INTERRUPT - offset 0100
// Entry:
//	Vectored into via trap on hardware interrupt
//
// Function:
//	check for halt interrupt
//	check for passive release (current ipl geq requestor)
//	if necessary, switch to kernel mode push stack frame,
//      update ps (including current mode and ipl copies), sp, and gp
//	pass the interrupt info to the system module
//
//
        HDW_VECTOR(PAL_INTERRUPT_ENTRY)
Trap_Interrupt:
        mfpr    r13, ev5__intid         // Fetch level of interruptor
        mfpr    r25, ev5__isr           // Fetch interrupt summary register

        srl     r25, isr_v_hlt, r9     // Get HLT bit
        mfpr	r14, ev5__ipl

        mtpr	r31, ev5__dtb_cm	// Set Mbox current mode to kern
        blbs    r9, sys_halt_interrupt	// halt_interrupt if HLT bit set

        cmple   r13, r14, r8            // R8 = 1 if intid .less than or eql. ipl
        bne     r8, sys_passive_release // Passive release is current rupt is lt or eq ipl

        and	r11, osfps_m_mode, r10 // get mode bit
        beq	r10, TRAP_INTERRUPT_10_		// Skip stack swap in kernel

        mtpr	r30, pt_usp		// save user stack
        mfpr	r30, pt_ksp		// get kern stack

TRAP_INTERRUPT_10_:
        lda	sp, (0-osfsf_c_size)(sp)// allocate stack space
        mfpr	r14, exc_addr		// get pc

        stq	r11, osfsf_ps(sp) 	// save ps
        stq	r14, osfsf_pc(sp) 	// save pc

        stq     r29, osfsf_gp(sp)       // push gp
        stq	r16, osfsf_a0(sp)	// a0

//	pvc_violate 354			// ps is cleared anyway,  if store to stack faults.
        mtpr    r31, ev5__ps            // Set Ibox current mode to kernel
        stq	r17, osfsf_a1(sp)	// a1

        stq	r18, osfsf_a2(sp) 	// a2
        subq	r13, 0x11, r12		// Start to translate from EV5IPL->OSFIPL

        srl	r12, 1, r8		// 1d, 1e: ipl 6.  1f: ipl 7.
        subq	r13, 0x1d, r9		// Check for 1d, 1e, 1f

        cmovge	r9, r8, r12		// if .ge. 1d, then take shifted value
        bis	r12, r31, r11		// set new ps

        mfpr	r12, pt_intmask
        and	r11, osfps_m_ipl, r14	// Isolate just new ipl (not really needed, since all non-ipl bits zeroed already)

        /*
         * Lance had space problems. We don't.
         */
        extbl	r12, r14, r14		// Translate new OSFIPL->EV5IPL
        mfpr	r29, pt_kgp		// update gp
        mtpr	r14, ev5__ipl		// load the new IPL into Ibox
        br	r31, sys_interrupt	// Go handle interrupt



//
// ITBMISS - Istream TBmiss Trap Entry Point
//
// ITBMISS - offset 0180
// Entry:
//	Vectored into via hardware trap on Istream translation buffer miss.
//
// Function:
//       Do a virtual fetch of the PTE, and fill the ITB if the PTE is valid.
//       Can trap into DTBMISS_DOUBLE.
//       This routine can use the PALshadow registers r8, r9, and r10
//
//

        HDW_VECTOR(PAL_ITB_MISS_ENTRY)
Trap_Itbmiss:
        // Real MM mapping
        nop
        mfpr	r8, ev5__ifault_va_form // Get virtual address of PTE.

        nop
        mfpr    r10, exc_addr           // Get PC of faulting instruction in case of DTBmiss.

pal_itb_ldq:
        ld_vpte r8, 0(r8)             	// Get PTE, traps to DTBMISS_DOUBLE in case of TBmiss
        mtpr	r10, exc_addr		// Restore exc_address if there was a trap.

        mfpr	r31, ev5__va		// Unlock VA in case there was a double miss
        nop

        and	r8, osfpte_m_foe, r25 	// Look for FOE set.
        blbc	r8, invalid_ipte_handler // PTE not valid.

        nop
        bne	r25, foe_ipte_handler	// FOE is set

        nop
        mtpr	r8, ev5__itb_pte	// Ibox remembers the VA, load the PTE into the ITB.

        hw_rei_stall			//


//
// DTBMISS_SINGLE - Dstream Single TBmiss Trap Entry Point
//
// DTBMISS_SINGLE - offset 0200
// Entry:
//	Vectored into via hardware trap on Dstream single translation
//      buffer miss.
//
// Function:
//	Do a virtual fetch of the PTE, and fill the DTB if the PTE is valid.
//	Can trap into DTBMISS_DOUBLE.
//	This routine can use the PALshadow registers r8, r9, and r10
//

        HDW_VECTOR(PAL_DTB_MISS_ENTRY)
Trap_Dtbmiss_Single:
        mfpr	r8, ev5__va_form      	// Get virtual address of PTE - 1 cycle delay.  E0.
        mfpr    r10, exc_addr           // Get PC of faulting instruction in case of error.  E1.

//	DEBUGSTORE(0x45)
//	DEBUG_EXC_ADDR()
                                        // Real MM mapping
        mfpr    r9, ev5__mm_stat	// Get read/write bit.  E0.
        mtpr	r10, pt6		// Stash exc_addr away

pal_dtb_ldq:
        ld_vpte r8, 0(r8)             	// Get PTE, traps to DTBMISS_DOUBLE in case of TBmiss
        nop				// Pad MF VA

        mfpr	r10, ev5__va            // Get original faulting VA for TB load.  E0.
        nop

        mtpr    r8, ev5__dtb_pte       	// Write DTB PTE part.   E0.
        blbc    r8, invalid_dpte_handler    // Handle invalid PTE

        mtpr    r10, ev5__dtb_tag      	// Write DTB TAG part, completes DTB load.  No virt ref for 3 cycles.
        mfpr	r10, pt6

                                        // Following 2 instructions take 2 cycles
        mtpr    r10, exc_addr           // Return linkage in case we trapped.  E1.
        mfpr	r31,  pt0		// Pad the write to dtb_tag

        hw_rei                          // Done, return


//
// DTBMISS_DOUBLE - Dstream Double TBmiss Trap Entry Point
//
//
// DTBMISS_DOUBLE - offset 0280
// Entry:
//	Vectored into via hardware trap on Double TBmiss from single
//      miss flows.
//
//	r8   - faulting VA
//	r9   - original MMstat
//	r10 - original exc_addr (both itb,dtb miss)
//	pt6 - original exc_addr (dtb miss flow only)
//	VA IPR - locked with original faulting VA
//
// Function:
// 	Get PTE, if valid load TB and return.
//	If not valid then take TNV/ACV exception.
//
//	pt4 and pt5 are reserved for this flow.
//
//
//

        HDW_VECTOR(PAL_DOUBLE_MISS_ENTRY)
Trap_Dtbmiss_double:
        mtpr 	r8, pt4			// save r8 to do exc_addr check
        mfpr	r8, exc_addr
        blbc	r8, Trap_Dtbmiss_Single	//if not in palmode, should be in the single routine, dummy!
        mfpr	r8, pt4			// restore r8
        nop
        mtpr	r22, pt5		// Get some scratch space. E1.
                                        // Due to virtual scheme, we can skip the first lookup and go
                                        // right to fetch of level 2 PTE
        sll     r8, (64-((2*page_seg_size_bits)+page_offset_size_bits)), r22  // Clean off upper bits of VA
        mtpr	r21, pt4		// Get some scratch space. E1.

        srl    	r22, 61-page_seg_size_bits, r22 // Get Va<seg1>*8
        mfpr	r21, pt_ptbr		// Get physical address of the page table.

        nop
        addq    r21, r22, r21           // Index into page table for level 2 PTE.

        sll    	r8, (64-((1*page_seg_size_bits)+page_offset_size_bits)), r22  // Clean off upper bits of VA
        ldq_p   	r21, 0(r21)            	// Get level 2 PTE (addr<2:0> ignored)

        srl    	r22, 61-page_seg_size_bits, r22	// Get Va<seg1>*8
        blbc 	r21, double_pte_inv		// Check for Invalid PTE.

        srl    	r21, 32, r21			// extract PFN from PTE
        sll     r21, page_offset_size_bits, r21	// get PFN * 2^13 for add to <seg3>*8

        addq    r21, r22, r21           // Index into page table for level 3 PTE.
        nop

        ldq_p   	r21, 0(r21)            	// Get level 3 PTE (addr<2:0> ignored)
        blbc	r21, double_pte_inv	// Check for invalid PTE.

        mtpr	r21, ev5__dtb_pte	// Write the PTE.  E0.
        mfpr	r22, pt5		// Restore scratch register

        mtpr	r8, ev5__dtb_tag	// Write the TAG. E0.  No virtual references in subsequent 3 cycles.
        mfpr	r21, pt4		// Restore scratch register

        nop				// Pad write to tag.
        nop

        nop				// Pad write to tag.
        nop

        hw_rei



//
// UNALIGN -- Dstream unalign trap
//
// UNALIGN - offset 0300
// Entry:
//	Vectored into via hardware trap on unaligned Dstream reference.
//
// Function:
//	Build stack frame
//	a0 <- Faulting VA
//	a1 <- Opcode
//	a2 <- src/dst register number
//	vector via entUna
//

        HDW_VECTOR(PAL_UNALIGN_ENTRY)
Trap_Unalign:
/*	DEBUGSTORE(0x47)*/
        sll	r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit
        mtpr	r31, ev5__ps		// Set Ibox current mode to kernel

        mfpr	r8, ev5__mm_stat	// Get mmstat --ok to use r8, no tbmiss
        mfpr	r14, exc_addr		// get pc

        srl	r8, mm_stat_v_ra, r13	// Shift Ra field to ls bits
        blbs	r14, pal_pal_bug_check  // Bugcheck if unaligned in PAL

        blbs	r8, UNALIGN_NO_DISMISS // lsb only set on store or fetch_m
                                        // not set, must be a load
        and	r13, 0x1F, r8		// isolate ra

        cmpeq   r8, 0x1F, r8		// check for r31/F31
        bne     r8, dfault_fetch_ldr31_err // if its a load to r31 or f31 -- dismiss the fault

UNALIGN_NO_DISMISS:
        bis	r11, r31, r12		// Save PS
        bge	r25, UNALIGN_NO_DISMISS_10_		// no stack swap needed if cm=kern


        mtpr	r31, ev5__dtb_cm	// Set Mbox current mode to kernel -
                                        //     no virt ref for next 2 cycles
        mtpr	r30, pt_usp		// save user stack

        bis	r31, r31, r12		// Set new PS
        mfpr	r30, pt_ksp

UNALIGN_NO_DISMISS_10_:
        mfpr	r25, ev5__va		// Unlock VA
        lda	sp, 0-osfsf_c_size(sp)// allocate stack space

        mtpr	r25, pt0		// Stash VA
        stq	r18, osfsf_a2(sp) 	// a2

        stq	r11, osfsf_ps(sp)	// save old ps
        srl	r13, mm_stat_v_opcode-mm_stat_v_ra, r25// Isolate opcode

        stq	r29, osfsf_gp(sp) 	// save gp
        addq	r14, 4, r14		// inc PC past the ld/st

        stq	r17, osfsf_a1(sp)	// a1
        and	r25, mm_stat_m_opcode, r17// Clean opocde for a1

        stq	r16, osfsf_a0(sp)	// save regs
        mfpr	r16, pt0		// a0 <- va/unlock

        stq	r14, osfsf_pc(sp)	// save pc
        mfpr	r25, pt_entuna		// get entry point


        bis	r12, r31, r11		// update ps
        br 	r31, unalign_trap_cont


//
// DFAULT	- Dstream Fault Trap Entry Point
//
// DFAULT - offset 0380
// Entry:
//	Vectored into via hardware trap on dstream fault or sign check
//      error on DVA.
//
// Function:
//	Ignore faults on FETCH/FETCH_M
//	Check for DFAULT in PAL
//	Build stack frame
//	a0 <- Faulting VA
//	a1 <- MMCSR (1 for ACV, 2 for FOR, 4 for FOW)
//	a2 <- R/W
//	vector via entMM
//
//
        HDW_VECTOR(PAL_D_FAULT_ENTRY)
Trap_Dfault:
//	DEBUGSTORE(0x48)
        sll	r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit
        mtpr	r31, ev5__ps		// Set Ibox current mode to kernel

        mfpr	r13, ev5__mm_stat	// Get mmstat
        mfpr	r8, exc_addr		// get pc, preserve r14

        srl	r13, mm_stat_v_opcode, r9 // Shift opcode field to ls bits
        blbs	r8, dfault_in_pal

        bis	r8, r31, r14		// move exc_addr to correct place
        bis	r11, r31, r12		// Save PS

        mtpr	r31, ev5__dtb_cm	// Set Mbox current mode to kernel -
                                        //     no virt ref for next 2 cycles
        and	r9, mm_stat_m_opcode, r9 // Clean all but opcode

        cmpeq   r9, evx_opc_sync, r9 	// Is the opcode fetch/fetchm?
        bne     r9, dfault_fetch_ldr31_err   // Yes, dismiss the fault

        //dismiss exception if load to r31/f31
        blbs	r13, dfault_no_dismiss	// mm_stat<0> set on store or fetchm

                                        // not a store or fetch, must be a load
        srl	r13, mm_stat_v_ra, r9	// Shift rnum to low bits

        and	r9, 0x1F, r9		// isolate rnum
        nop

        cmpeq   r9, 0x1F, r9   	// Is the rnum r31 or f31?
        bne     r9, dfault_fetch_ldr31_err    // Yes, dismiss the fault

dfault_no_dismiss:
        and	r13, 0xf, r13	// Clean extra bits in mm_stat
        bge	r25, dfault_trap_cont	// no stack swap needed if cm=kern


        mtpr	r30, pt_usp		// save user stack
        bis	r31, r31, r12		// Set new PS

        mfpr	r30, pt_ksp
        br	r31, dfault_trap_cont


//
// MCHK	-  Machine Check Trap Entry Point
//
// MCHK - offset 0400
// Entry:
//	Vectored into via hardware trap on machine check.
//
// Function:
//
//

        HDW_VECTOR(PAL_MCHK_ENTRY)
Trap_Mchk:
        DEBUGSTORE(0x49)
        mtpr    r31, ic_flush_ctl       // Flush the Icache
        br      r31, sys_machine_check


//
// OPCDEC	-  Illegal Opcode Trap Entry Point
//
// OPCDEC - offset 0480
// Entry:
//	Vectored into via hardware trap on illegal opcode.
//
//	Build stack frame
//	a0 <- code
//	a1 <- unpred
//	a2 <- unpred
//	vector via entIF
//
//

        HDW_VECTOR(PAL_OPCDEC_ENTRY)
Trap_Opcdec:
        DEBUGSTORE(0x4a)
//simos	DEBUG_EXC_ADDR()
        sll	r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit
        mtpr	r31, ev5__ps		// Set Ibox current mode to kernel

        mfpr	r14, exc_addr		// get pc
        blbs	r14, pal_pal_bug_check	// check opcdec in palmode

        bis	r11, r31, r12		// Save PS
        bge	r25, TRAP_OPCDEC_10_		// no stack swap needed if cm=kern


        mtpr	r31, ev5__dtb_cm	// Set Mbox current mode to kernel -
                                        //     no virt ref for next 2 cycles
        mtpr	r30, pt_usp		// save user stack

        bis	r31, r31, r12		// Set new PS
        mfpr	r30, pt_ksp

TRAP_OPCDEC_10_:
        lda	sp, 0-osfsf_c_size(sp)// allocate stack space
        addq	r14, 4, r14		// inc pc

        stq	r16, osfsf_a0(sp)	// save regs
        bis	r31, osf_a0_opdec, r16	// set a0

        stq	r11, osfsf_ps(sp)	// save old ps
        mfpr	r13, pt_entif		// get entry point

        stq	r18, osfsf_a2(sp) 	// a2
        stq	r17, osfsf_a1(sp)	// a1

        stq	r29, osfsf_gp(sp) 	// save gp
        stq	r14, osfsf_pc(sp)	// save pc

        bis	r12, r31, r11		// update ps
        mtpr	r13, exc_addr		// load exc_addr with entIF
                                        // 1 cycle to hw_rei, E1

        mfpr	r29, pt_kgp		// get the kgp, E1

        hw_rei_spe			// done, E1


//
// ARITH	-  Arithmetic Exception Trap Entry Point
//
// ARITH - offset 0500
// Entry:
//	Vectored into via hardware trap on arithmetic excpetion.
//
// Function:
//	Build stack frame
//	a0 <- exc_sum
//	a1 <- exc_mask
//	a2 <- unpred
//	vector via entArith
//
//
        HDW_VECTOR(PAL_ARITH_ENTRY)
Trap_Arith:
        DEBUGSTORE(0x4b)
        and	r11, osfps_m_mode, r12 // get mode bit
        mfpr	r31, ev5__va		// unlock mbox

        bis	r11, r31, r25		// save ps
        mfpr	r14, exc_addr		// get pc

        nop
        blbs	r14, pal_pal_bug_check	// arith trap from PAL

        mtpr    r31, ev5__dtb_cm        // Set Mbox current mode to kernel -
                                        //     no virt ref for next 2 cycles
        beq	r12, TRAP_ARITH_10_		// if zero we are in kern now

        bis	r31, r31, r25		// set the new ps
        mtpr	r30, pt_usp		// save user stack

        nop
        mfpr	r30, pt_ksp		// get kern stack

TRAP_ARITH_10_: 	lda	sp, 0-osfsf_c_size(sp)	// allocate stack space
        mtpr	r31, ev5__ps		// Set Ibox current mode to kernel

        nop				// Pad current mode write and stq
        mfpr	r13, ev5__exc_sum	// get the exc_sum

        mfpr	r12, pt_entarith
        stq	r14, osfsf_pc(sp)	// save pc

        stq	r17, osfsf_a1(sp)
        mfpr    r17, ev5__exc_mask      // Get exception register mask IPR - no mtpr exc_sum in next cycle

        stq	r11, osfsf_ps(sp)	// save ps
        bis	r25, r31, r11		// set new ps

        stq	r16, osfsf_a0(sp)	// save regs
        srl	r13, exc_sum_v_swc, r16	// shift data to correct position

        stq	r18, osfsf_a2(sp)
//	pvc_violate 354			// ok, but make sure reads of exc_mask/sum are not in same trap shadow
        mtpr	r31, ev5__exc_sum	// Unlock exc_sum and exc_mask

        stq	r29, osfsf_gp(sp)
        mtpr	r12, exc_addr		// Set new PC - 1 bubble to hw_rei - E1

        mfpr	r29, pt_kgp		// get the kern gp - E1
        hw_rei_spe			// done - E1


//
// FEN	-  Illegal Floating Point Operation Trap Entry Point
//
// FEN - offset 0580
// Entry:
//	Vectored into via hardware trap on illegal FP op.
//
// Function:
//	Build stack frame
//	a0 <- code
//	a1 <- unpred
//	a2 <- unpred
//	vector via entIF
//
//

        HDW_VECTOR(PAL_FEN_ENTRY)
Trap_Fen:
        sll	r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit
        mtpr	r31, ev5__ps		// Set Ibox current mode to kernel

        mfpr	r14, exc_addr		// get pc
        blbs	r14, pal_pal_bug_check	// check opcdec in palmode

        mfpr	r13, ev5__icsr
        nop

        bis	r11, r31, r12		// Save PS
        bge	r25, TRAP_FEN_10_		// no stack swap needed if cm=kern

        mtpr	r31, ev5__dtb_cm	// Set Mbox current mode to kernel -
                                        //     no virt ref for next 2 cycles
        mtpr	r30, pt_usp		// save user stack

        bis	r31, r31, r12		// Set new PS
        mfpr	r30, pt_ksp

TRAP_FEN_10_:
        lda	sp, 0-osfsf_c_size(sp)// allocate stack space
        srl     r13, icsr_v_fpe, r25   // Shift FP enable to bit 0


        stq	r16, osfsf_a0(sp)	// save regs
        mfpr	r13, pt_entif		// get entry point

        stq	r18, osfsf_a2(sp) 	// a2
        stq	r11, osfsf_ps(sp)	// save old ps

        stq	r29, osfsf_gp(sp) 	// save gp
        bis	r12, r31, r11		// set new ps

        stq	r17, osfsf_a1(sp)	// a1
        blbs	r25,fen_to_opcdec	// If FP is enabled, this is really OPCDEC.

        bis	r31, osf_a0_fen, r16	// set a0
        stq	r14, osfsf_pc(sp)	// save pc

        mtpr	r13, exc_addr		// load exc_addr with entIF
                                        // 1 cycle to hw_rei -E1

        mfpr	r29, pt_kgp		// get the kgp -E1

        hw_rei_spe			// done -E1

//	FEN trap was taken, but the fault is really opcdec.
        ALIGN_BRANCH
fen_to_opcdec:
        addq	r14, 4, r14		// save PC+4
        bis	r31, osf_a0_opdec, r16	// set a0

        stq	r14, osfsf_pc(sp)	// save pc
        mtpr	r13, exc_addr		// load exc_addr with entIF
                                        // 1 cycle to hw_rei

        mfpr	r29, pt_kgp		// get the kgp
        hw_rei_spe			// done



//////////////////////////////////////////////////////////////////////////////
// Misc handlers - Start area for misc code.
//////////////////////////////////////////////////////////////////////////////

//
// dfault_trap_cont
//	A dfault trap has been taken.  The sp has been updated if necessary.
//	Push a stack frame a vector via entMM.
//
//	Current state:
//		r12 - new PS
//		r13 - MMstat
//		VA - locked
//
//
        ALIGN_BLOCK
dfault_trap_cont:
        lda	sp, 0-osfsf_c_size(sp)// allocate stack space
        mfpr	r25, ev5__va		// Fetch VA/unlock

        stq	r18, osfsf_a2(sp) 	// a2
        and	r13, 1, r18		// Clean r/w bit for a2

        stq	r16, osfsf_a0(sp)	// save regs
        bis	r25, r31, r16		// a0 <- va

        stq	r17, osfsf_a1(sp)	// a1
        srl	r13, 1, r17		// shift fault bits to right position

        stq	r11, osfsf_ps(sp)	// save old ps
        bis	r12, r31, r11		// update ps

        stq	r14, osfsf_pc(sp)	// save pc
        mfpr	r25, pt_entmm		// get entry point

        stq	r29, osfsf_gp(sp) 	// save gp
        cmovlbs	r17, 1, r17		// a2. acv overrides fox.

        mtpr	r25, exc_addr		// load exc_addr with entMM
                                        // 1 cycle to hw_rei
        mfpr	r29, pt_kgp		// get the kgp

        hw_rei_spe			// done

//
//unalign_trap_cont
//	An unalign trap has been taken.  Just need to finish up a few things.
//
//	Current state:
//		r25 - entUna
//		r13 - shifted MMstat
//
//
        ALIGN_BLOCK
unalign_trap_cont:
        mtpr	r25, exc_addr		// load exc_addr with entUna
                                        // 1 cycle to hw_rei


        mfpr	r29, pt_kgp		// get the kgp
        and	r13, mm_stat_m_ra, r18	// Clean Ra for a2

        hw_rei_spe			// done



//
// dfault_in_pal
//	Dfault trap was taken, exc_addr points to a PAL PC.
//	r9 - mmstat<opcode> right justified
//	r8 - exception address
//
//	These are the cases:
//		opcode was STQ -- from a stack builder, KSP not valid halt
//			r14 - original exc_addr
//			r11 - original PS
//		opcode was STL_C  -- rti or retsys clear lock_flag by stack write,
//					KSP not valid halt
//			r11 - original PS
//			r14 - original exc_addr
//		opcode was LDQ -- retsys or rti stack read, KSP not valid halt
//			r11 - original PS
//			r14 - original exc_addr
//		opcode was HW_LD -- itbmiss or dtbmiss, bugcheck due to fault on page tables
//			r10 - original exc_addr
//			r11 - original PS
//
//
//
        ALIGN_BLOCK
dfault_in_pal:
        DEBUGSTORE(0x50)
        bic     r8, 3, r8            // Clean PC
        mfpr	r9, pal_base

        mfpr	r31, va			// unlock VA

        // if not real_mm, should never get here from miss flows

        subq    r9, r8, r8            // pal_base - offset

        lda     r9, pal_itb_ldq-pal_base(r8)
        nop

        beq 	r9, dfault_do_bugcheck
        lda     r9, pal_dtb_ldq-pal_base(r8)

        beq 	r9, dfault_do_bugcheck

//
// KSP invalid halt case --
ksp_inval_halt:
        DEBUGSTORE(76)
        bic	r11, osfps_m_mode, r11	// set ps to kernel mode
        mtpr    r0, pt0

        mtpr	r31, dtb_cm		// Make sure that the CM IPRs are all kernel mode
        mtpr	r31, ips

        mtpr	r14, exc_addr		// Set PC to instruction that caused trouble
        bsr     r0, pal_update_pcb      // update the pcb

        lda     r0, hlt_c_ksp_inval(r31)  // set halt code to hw halt
        br      r31, sys_enter_console  // enter the console

        ALIGN_BRANCH
dfault_do_bugcheck:
        bis	r10, r31, r14		// bugcheck expects exc_addr in r14
        br	r31, pal_pal_bug_check


//
// dfault_fetch_ldr31_err - ignore faults on fetch(m) and loads to r31/f31
//	On entry -
//		r14 - exc_addr
//		VA is locked
//
//
        ALIGN_BLOCK
dfault_fetch_ldr31_err:
        mtpr	r11, ev5__dtb_cm
        mtpr	r11, ev5__ps		// Make sure ps hasn't changed

        mfpr	r31, va			// unlock the mbox
        addq	r14, 4, r14		// inc the pc to skip the fetch

        mtpr	r14, exc_addr		// give ibox new PC
        mfpr	r31, pt0		// pad exc_addr write

        hw_rei



        ALIGN_BLOCK
//
// sys_from_kern
//	callsys from kernel mode - OS bugcheck machine check
//
//
sys_from_kern:
        mfpr	r14, exc_addr			// PC points to call_pal
        subq	r14, 4, r14

        lda	r25, mchk_c_os_bugcheck(r31)    // fetch mchk code
        br      r31, pal_pal_mchk


// Continuation of long call_pal flows
//
// wrent_tbl
//	Table to write *int in paltemps.
//	4 instructions/entry
//	r16 has new value
//
//
        ALIGN_BLOCK
wrent_tbl:
//orig	pvc_jsr	wrent, dest=1
        nop
        mtpr	r16, pt_entint

        mfpr	r31, pt0		// Pad for mt->mf paltemp rule
        hw_rei


//orig	pvc_jsr	wrent, dest=1
        nop
        mtpr	r16, pt_entarith

        mfpr    r31, pt0                // Pad for mt->mf paltemp rule
        hw_rei


//orig	pvc_jsr	wrent, dest=1
        nop
        mtpr	r16, pt_entmm

        mfpr    r31, pt0                // Pad for mt->mf paltemp rule
        hw_rei


//orig	pvc_jsr	wrent, dest=1
        nop
        mtpr	r16, pt_entif

        mfpr    r31, pt0                // Pad for mt->mf paltemp rule
        hw_rei


//orig	pvc_jsr	wrent, dest=1
        nop
        mtpr	r16, pt_entuna

        mfpr    r31, pt0                // Pad for mt->mf paltemp rule
        hw_rei


//orig	pvc_jsr	wrent, dest=1
        nop
        mtpr	r16, pt_entsys

        mfpr    r31, pt0                // Pad for mt->mf paltemp rule
        hw_rei

        ALIGN_BLOCK
//
// tbi_tbl
//	Table to do tbi instructions
//	4 instructions per entry
//
tbi_tbl:
        // -2 tbia
//orig	pvc_jsr tbi, dest=1
        mtpr	r31, ev5__dtb_ia	// Flush DTB
        mtpr	r31, ev5__itb_ia	// Flush ITB

        hw_rei_stall

        nop				// Pad table

        // -1 tbiap
//orig	pvc_jsr tbi, dest=1
        mtpr	r31, ev5__dtb_iap	// Flush DTB
        mtpr	r31, ev5__itb_iap	// Flush ITB

        hw_rei_stall

        nop				// Pad table


        // 0 unused
//orig	pvc_jsr tbi, dest=1
        hw_rei				// Pad table
        nop
        nop
        nop


        // 1 tbisi
//orig	pvc_jsr tbi, dest=1

        nop
        nop
        mtpr	r17, ev5__itb_is	// Flush ITB
        hw_rei_stall

        // 2 tbisd
//orig	pvc_jsr tbi, dest=1
        mtpr	r17, ev5__dtb_is	// Flush DTB.
        nop

        nop
        hw_rei_stall


        // 3 tbis
//orig	pvc_jsr tbi, dest=1
        mtpr	r17, ev5__dtb_is	// Flush DTB
        br	r31, tbi_finish
        ALIGN_BRANCH
tbi_finish:
        mtpr	r17, ev5__itb_is	// Flush ITB
        hw_rei_stall



        ALIGN_BLOCK
//
// bpt_bchk_common:
//	Finish up the bpt/bchk instructions
//
bpt_bchk_common:
        stq	r18, osfsf_a2(sp) 	// a2
        mfpr	r13, pt_entif		// get entry point

        stq	r12, osfsf_ps(sp)	// save old ps
        stq	r14, osfsf_pc(sp)	// save pc

        stq	r29, osfsf_gp(sp) 	// save gp
        mtpr	r13, exc_addr		// load exc_addr with entIF
                                        // 1 cycle to hw_rei

        mfpr	r29, pt_kgp		// get the kgp


        hw_rei_spe			// done


        ALIGN_BLOCK
//
// rti_to_user
//	Finish up the rti instruction
//
rti_to_user:
        mtpr	r11, ev5__dtb_cm	// set Mbox current mode - no virt ref for 2 cycles
        mtpr	r11, ev5__ps		// set Ibox current mode - 2 bubble to hw_rei

        mtpr	r31, ev5__ipl		// set the ipl. No hw_rei for 2 cycles
        mtpr	r25, pt_ksp		// save off incase RTI to user

        mfpr	r30, pt_usp
        hw_rei_spe			// and back


        ALIGN_BLOCK
//
// rti_to_kern
//	Finish up the rti instruction
//
rti_to_kern:
        and	r12, osfps_m_ipl, r11	// clean ps
        mfpr	r12, pt_intmask		// get int mask

        extbl	r12, r11, r12		// get mask for this ipl
        mtpr	r25, pt_ksp		// save off incase RTI to user

        mtpr	r12, ev5__ipl		// set the new ipl.
        or	r25, r31, sp		// sp

//	pvc_violate 217			// possible hidden mt->mf ipl not a problem in callpals
        hw_rei

        ALIGN_BLOCK
//
// swpctx_cont
//	Finish up the swpctx instruction
//

swpctx_cont:

        bic	r25, r24, r25		// clean icsr<FPE,PMP>
        sll	r12, icsr_v_fpe, r12	// shift new fen to pos

        ldq_p	r14, osfpcb_q_mmptr(r16)// get new mmptr
        srl	r22, osfpcb_v_pme, r22	// get pme down to bit 0

        or	r25, r12, r25		// icsr with new fen
        srl	r23, 32, r24		// move asn to low asn pos

        and	r22, 1, r22
        sll	r24, itb_asn_v_asn, r12

        sll	r22, icsr_v_pmp, r22
        nop

        or	r25, r22, r25		// icsr with new pme

        sll	r24, dtb_asn_v_asn, r24

        subl	r23, r13, r13		// gen new cc offset
        mtpr	r12, itb_asn		// no hw_rei_stall in 0,1,2,3,4

        mtpr	r24, dtb_asn		// Load up new ASN
        mtpr	r25, icsr		// write the icsr

        sll	r14, page_offset_size_bits, r14 // Move PTBR into internal position.
        ldq_p	r25, osfpcb_q_usp(r16)	// get new usp

        insll	r13, 4, r13		// >> 32
//	pvc_violate 379			// ldq_p can't trap except replay.  only problem if mf same ipr in same shadow
        mtpr	r14, pt_ptbr		// load the new ptbr

        mtpr	r13, cc			// set new offset
        ldq_p	r30, osfpcb_q_ksp(r16)	// get new ksp

//	pvc_violate 379			// ldq_p can't trap except replay.  only problem if mf same ipr in same shadow
        mtpr	r25, pt_usp		// save usp

no_pm_change_10_:	hw_rei_stall			// back we go

        ALIGN_BLOCK
//
// swppal_cont - finish up the swppal call_pal
//

swppal_cont:
        mfpr	r2, pt_misc		// get misc bits
        sll	r0, pt_misc_v_switch, r0 // get the "I've switched" bit
        or	r2, r0, r2		// set the bit
        mtpr	r31, ev5__alt_mode	// ensure alt_mode set to 0 (kernel)
        mtpr	r2, pt_misc		// update the chip

        or	r3, r31, r4
        mfpr	r3, pt_impure		// pass pointer to the impure area in r3
//orig	fix_impure_ipr	r3		// adjust impure pointer for ipr read
//orig	restore_reg1	bc_ctl, r1, r3, ipr=1		// pass cns_bc_ctl in r1
//orig	restore_reg1	bc_config, r2, r3, ipr=1	// pass cns_bc_config in r2
//orig	unfix_impure_ipr r3		// restore impure pointer
        lda	r3, CNS_Q_IPR(r3)
        RESTORE_SHADOW(r1,CNS_Q_BC_CTL,r3);
        RESTORE_SHADOW(r1,CNS_Q_BC_CFG,r3);
        lda	r3, -CNS_Q_IPR(r3)

        or	r31, r31, r0		// set status to success
//	pvc_violate	1007
        jmp	r31, (r4)		// and call our friend, it's her problem now


swppal_fail:
        addq	r0, 1, r0		// set unknown pal or not loaded
        hw_rei				// and return


// .sbttl	"Memory management"

        ALIGN_BLOCK
//
//foe_ipte_handler
// IFOE detected on level 3 pte, sort out FOE vs ACV
//
// on entry:
//	with
//	R8	 = pte
//	R10	 = pc
//
// Function
//	Determine TNV vs ACV vs FOE. Build stack and dispatch
//	Will not be here if TNV.
//

foe_ipte_handler:
        sll	r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit
        mtpr	r31, ev5__ps		// Set Ibox current mode to kernel

        bis	r11, r31, r12		// Save PS for stack write
        bge	r25, foe_ipte_handler_10_		// no stack swap needed if cm=kern


        mtpr	r31, ev5__dtb_cm	// Set Mbox current mode to kernel -
                                        //     no virt ref for next 2 cycles
        mtpr	r30, pt_usp		// save user stack

        bis	r31, r31, r11		// Set new PS
        mfpr	r30, pt_ksp

        srl	r8, osfpte_v_ure-osfpte_v_kre, r8 // move pte user bits to kern
        nop

foe_ipte_handler_10_:	srl	r8, osfpte_v_kre, r25	// get kre to <0>
        lda	sp, 0-osfsf_c_size(sp)// allocate stack space

        or	r10, r31, r14		// Save pc/va in case TBmiss or fault on stack
        mfpr	r13, pt_entmm		// get entry point

        stq	r16, osfsf_a0(sp)	// a0
        or	r14, r31, r16		// pass pc/va as a0

        stq	r17, osfsf_a1(sp)	// a1
        nop

        stq	r18, osfsf_a2(sp) 	// a2
        lda	r17, mmcsr_c_acv(r31)	// assume ACV

        stq	r16, osfsf_pc(sp)	// save pc
        cmovlbs r25, mmcsr_c_foe, r17	// otherwise FOE

        stq	r12, osfsf_ps(sp)	// save ps
        subq	r31, 1, r18		// pass flag of istream as a2

        stq	r29, osfsf_gp(sp)
        mtpr	r13, exc_addr		// set vector address

        mfpr	r29, pt_kgp		// load kgp
        hw_rei_spe			// out to exec

        ALIGN_BLOCK
//
//invalid_ipte_handler
// TNV detected on level 3 pte, sort out TNV vs ACV
//
// on entry:
//	with
//	R8	 = pte
//	R10	 = pc
//
// Function
//	Determine TNV vs ACV. Build stack and dispatch.
//

invalid_ipte_handler:
        sll	r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit
        mtpr	r31, ev5__ps		// Set Ibox current mode to kernel

        bis	r11, r31, r12		// Save PS for stack write
        bge	r25, invalid_ipte_handler_10_		// no stack swap needed if cm=kern


        mtpr	r31, ev5__dtb_cm	// Set Mbox current mode to kernel -
                                        //     no virt ref for next 2 cycles
        mtpr	r30, pt_usp		// save user stack

        bis	r31, r31, r11		// Set new PS
        mfpr	r30, pt_ksp

        srl	r8, osfpte_v_ure-osfpte_v_kre, r8 // move pte user bits to kern
        nop

invalid_ipte_handler_10_:	srl	r8, osfpte_v_kre, r25	// get kre to <0>
        lda	sp, 0-osfsf_c_size(sp)// allocate stack space

        or	r10, r31, r14		// Save pc/va in case TBmiss on stack
        mfpr	r13, pt_entmm		// get entry point

        stq	r16, osfsf_a0(sp)	// a0
        or	r14, r31, r16		// pass pc/va as a0

        stq	r17, osfsf_a1(sp)	// a1
        nop

        stq	r18, osfsf_a2(sp) 	// a2
        and	r25, 1, r17		// Isolate kre

        stq	r16, osfsf_pc(sp)	// save pc
        xor	r17, 1, r17		// map to acv/tnv as a1

        stq	r12, osfsf_ps(sp)	// save ps
        subq	r31, 1, r18		// pass flag of istream as a2

        stq	r29, osfsf_gp(sp)
        mtpr	r13, exc_addr		// set vector address

        mfpr	r29, pt_kgp		// load kgp
        hw_rei_spe			// out to exec




        ALIGN_BLOCK
//
//invalid_dpte_handler
// INVALID detected on level 3 pte, sort out TNV vs ACV
//
// on entry:
//	with
//	R10	 = va
//	R8	 = pte
//	R9	 = mm_stat
//	PT6	 = pc
//
// Function
//	Determine TNV vs ACV. Build stack and dispatch
//


invalid_dpte_handler:
        mfpr	r12, pt6
        blbs	r12, tnv_in_pal		// Special handler if original faulting reference was in PALmode

        bis	r12, r31, r14		// save PC in case of tbmiss or fault
        srl	r9, mm_stat_v_opcode, r25	// shift opc to <0>

        mtpr	r11, pt0		// Save PS for stack write
        and 	r25, mm_stat_m_opcode, r25	// isolate opcode

        cmpeq	r25, evx_opc_sync, r25	// is it FETCH/FETCH_M?
        blbs	r25, nmiss_fetch_ldr31_err	// yes

        //dismiss exception if load to r31/f31
        blbs	r9, invalid_dpte_no_dismiss	// mm_stat<0> set on store or fetchm

                                        // not a store or fetch, must be a load
        srl	r9, mm_stat_v_ra, r25	// Shift rnum to low bits

        and	r25, 0x1F, r25		// isolate rnum
        nop

        cmpeq   r25, 0x1F, r25  	// Is the rnum r31 or f31?
        bne     r25, nmiss_fetch_ldr31_err    // Yes, dismiss the fault

invalid_dpte_no_dismiss:
        sll	r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit
        mtpr	r31, ev5__ps		// Set Ibox current mode to kernel

        mtpr	r31, ev5__dtb_cm	// Set Mbox current mode to kernel -
                                        //     no virt ref for next 2 cycles
        bge	r25, invalid_dpte_no_dismiss_10_		// no stack swap needed if cm=kern

        srl	r8, osfpte_v_ure-osfpte_v_kre, r8 // move pte user bits to kern
        mtpr	r30, pt_usp		// save user stack

        bis	r31, r31, r11		// Set new PS
        mfpr	r30, pt_ksp

invalid_dpte_no_dismiss_10_:	srl	r8, osfpte_v_kre, r12	// get kre to <0>
        lda	sp, 0-osfsf_c_size(sp)// allocate stack space

        or	r10, r31, r25		// Save va in case TBmiss on stack
        and	r9, 1, r13		// save r/w flag

        stq	r16, osfsf_a0(sp)	// a0
        or	r25, r31, r16		// pass va as a0

        stq	r17, osfsf_a1(sp)	// a1
        or	r31, mmcsr_c_acv, r17 	// assume acv

        srl	r12, osfpte_v_kwe-osfpte_v_kre, r25 // get write enable to <0>
        stq	r29, osfsf_gp(sp)

        stq	r18, osfsf_a2(sp) 	// a2
        cmovlbs r13, r25, r12		// if write access move acv based on write enable

        or	r13, r31, r18		// pass flag of dstream access and read vs write
        mfpr	r25, pt0		// get ps

        stq	r14, osfsf_pc(sp)	// save pc
        mfpr	r13, pt_entmm		// get entry point

        stq	r25, osfsf_ps(sp)	// save ps
        mtpr	r13, exc_addr		// set vector address

        mfpr	r29, pt_kgp		// load kgp
        cmovlbs	r12, mmcsr_c_tnv, r17 	// make p2 be tnv if access ok else acv

        hw_rei_spe			// out to exec

//
//
// We come here if we are erring on a dtb_miss, and the instr is a
// fetch, fetch_m, of load to r31/f31.
// The PC is incremented, and we return to the program.
// essentially ignoring the instruction and error.
//
//
        ALIGN_BLOCK
nmiss_fetch_ldr31_err:
        mfpr	r12, pt6
        addq	r12, 4, r12		// bump pc to pc+4

        mtpr	r12, exc_addr		// and set entry point
        mfpr	r31, pt0		// pad exc_addr write

        hw_rei				//

        ALIGN_BLOCK
//
// double_pte_inv
//	We had a single tbmiss which turned into a double tbmiss which found
//	an invalid PTE.  Return to single miss with a fake pte, and the invalid
//	single miss flow will report the error.
//
// on entry:
//	r21  	PTE
//	r22	available
//	VA IPR	locked with original fault VA
//       pt4  	saved r21
//	pt5  	saved r22
//	pt6	original exc_addr
//
// on return to tbmiss flow:
//	r8	fake PTE
//
//
//
double_pte_inv:
        srl	r21, osfpte_v_kre, r21	// get the kre bit to <0>
        mfpr	r22, exc_addr		// get the pc

        lda	r22, 4(r22)		// inc the pc
        lda	r8, osfpte_m_prot(r31)	 // make a fake pte with xre and xwe set

        cmovlbc r21, r31, r8		// set to all 0 for acv if pte<kre> is 0
        mtpr	r22, exc_addr		// set for rei

        mfpr	r21, pt4		// restore regs
        mfpr	r22, pt5		// restore regs

        hw_rei				// back to tb miss

        ALIGN_BLOCK
//
//tnv_in_pal
//	The only places in pal that ld or store are the
// 	stack builders, rti or retsys.  Any of these mean we
//	need to take a ksp not valid halt.
//
//
tnv_in_pal:


        br	r31, ksp_inval_halt


// .sbttl	"Icache flush routines"

        ALIGN_BLOCK
//
// Common Icache flush routine.
//
//
//
pal_ic_flush:
        nop
        mtpr	r31, ev5__ic_flush_ctl		// Icache flush - E1
        nop
        nop

// Now, do 44 NOPs.  3RFB prefetches (24) + IC buffer,IB,slot,issue (20)
        nop
        nop
        nop
        nop

        nop
        nop
        nop
        nop

        nop
        nop		// 10

        nop
        nop
        nop
        nop

        nop
        nop
        nop
        nop

        nop
        nop		// 20

        nop
        nop
        nop
        nop

        nop
        nop
        nop
        nop

        nop
        nop		// 30
        nop
        nop
        nop
        nop

        nop
        nop
        nop
        nop

        nop
        nop		// 40

        nop
        nop

one_cycle_and_hw_rei:
        nop
        nop

        hw_rei_stall

        ALIGN_BLOCK
//
//osfpal_calpal_opcdec
//  Here for all opcdec CALL_PALs
//
//	Build stack frame
//	a0 <- code
//	a1 <- unpred
//	a2 <- unpred
//	vector via entIF
//
//

osfpal_calpal_opcdec:
        sll	r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit
        mtpr	r31, ev5__ps		// Set Ibox current mode to kernel

        mfpr	r14, exc_addr		// get pc
        nop

        bis	r11, r31, r12		// Save PS for stack write
        bge	r25, osfpal_calpal_opcdec_10_		// no stack swap needed if cm=kern


        mtpr	r31, ev5__dtb_cm	// Set Mbox current mode to kernel -
                                        //     no virt ref for next 2 cycles
        mtpr	r30, pt_usp		// save user stack

        bis	r31, r31, r11		// Set new PS
        mfpr	r30, pt_ksp

osfpal_calpal_opcdec_10_:
        lda	sp, 0-osfsf_c_size(sp)// allocate stack space
        nop

        stq	r16, osfsf_a0(sp)	// save regs
        bis	r31, osf_a0_opdec, r16	// set a0

        stq	r18, osfsf_a2(sp) 	// a2
        mfpr	r13, pt_entif		// get entry point

        stq	r12, osfsf_ps(sp)	// save old ps
        stq	r17, osfsf_a1(sp)	// a1

        stq	r14, osfsf_pc(sp)	// save pc
        nop

        stq	r29, osfsf_gp(sp) 	// save gp
        mtpr	r13, exc_addr		// load exc_addr with entIF
                                        // 1 cycle to hw_rei

        mfpr	r29, pt_kgp		// get the kgp


        hw_rei_spe			// done





//
//pal_update_pcb
//	Update the PCB with the current SP, AST, and CC info
//
//	r0 - return linkage
//
        ALIGN_BLOCK

pal_update_pcb:
        mfpr	r12, pt_pcbb		// get pcbb
        and	r11, osfps_m_mode, r25	// get mode
        beq	r25, pal_update_pcb_10_		// in kern? no need to update user sp
        mtpr	r30, pt_usp		// save user stack
        stq_p	r30, osfpcb_q_usp(r12)	// store usp
        br	r31, pal_update_pcb_20_		// join common
pal_update_pcb_10_:	stq_p	r30, osfpcb_q_ksp(r12)	// store ksp
pal_update_pcb_20_:	rpcc	r13			// get cyccounter
        srl	r13, 32, r14		// move offset
        addl	r13, r14, r14		// merge for new time
        stl_p	r14, osfpcb_l_cc(r12)	// save time

//orig	pvc_jsr	updpcb, bsr=1, dest=1
        ret	r31, (r0)


//
// pal_save_state
//
//	Function
//		All chip state saved, all PT's, SR's FR's, IPR's
//
//
// Regs' on entry...
//
//	R0 	= halt code
//	pt0	= r0
//	R1	= pointer to impure
//	pt4	= r1
//	R3	= return addr
//	pt5	= r3
//
//	register usage:
//		r0 = halt_code
//		r1 = addr of impure area
//		r3 = return_address
//		r4 = scratch
//
//

        ALIGN_BLOCK
        .globl pal_save_state
pal_save_state:
//
//
// start of implementation independent save routine
//
// 		the impure area is larger than the addressibility of hw_ld and hw_st
//		therefore, we need to play some games:  The impure area
//		is informally divided into the "machine independent" part and the
//		"machine dependent" part.  The state that will be saved in the
//    		"machine independent" part are gpr's, fpr's, hlt, flag, mchkflag (use  (un)fix_impure_gpr macros).
//		All others will be in the "machine dependent" part (use (un)fix_impure_ipr macros).
//		The impure pointer will need to be adjusted by a different offset for each.  The store/restore_reg
//		macros will automagically adjust the offset correctly.
//

// The distributed code is commented out and followed by corresponding SRC code.
// Beware: SAVE_IPR and RESTORE_IPR blow away r0(v0)

//orig	fix_impure_gpr	r1		// adjust impure area pointer for stores to "gpr" part of impure area
        lda	r1, 0x200(r1)		// Point to center of CPU segment
//orig	store_reg1 flag, r31, r1, ipr=1	// clear dump area flag
        SAVE_GPR(r31,CNS_Q_FLAG,r1)	// Clear the valid flag
//orig	store_reg1 hlt, r0, r1, ipr=1
        SAVE_GPR(r0,CNS_Q_HALT,r1)	// Save the halt code

        mfpr	r0, pt0			// get r0 back			//orig
//orig	store_reg1 0, r0, r1		// save r0
        SAVE_GPR(r0,CNS_Q_GPR+0x00,r1)	// Save r0

        mfpr	r0, pt4			// get r1 back			//orig
//orig	store_reg1 1, r0, r1		// save r1
        SAVE_GPR(r0,CNS_Q_GPR+0x08,r1)	// Save r1

//orig	store_reg 2			// save r2
        SAVE_GPR(r2,CNS_Q_GPR+0x10,r1)	// Save r2

        mfpr	r0, pt5			// get r3 back			//orig
//orig	store_reg1 3, r0, r1		// save r3
        SAVE_GPR(r0,CNS_Q_GPR+0x18,r1)	// Save r3

        // reason code has been saved
        // r0 has been saved
        // r1 has been saved
        // r2 has been saved
        // r3 has been saved
        // pt0, pt4, pt5 have been lost

        //
        // Get out of shadow mode
        //

        mfpr	r2, icsr		// Get icsr
        ldah	r0, (1<<(icsr_v_sde-16))(r31)
        bic	r2, r0, r0		// ICSR with SDE clear
        mtpr	r0, icsr		// Turn off SDE

        mfpr	r31, pt0		// SDE bubble cycle 1
        mfpr	r31, pt0		// SDE bubble cycle 2
        mfpr	r31, pt0		// SDE bubble cycle 3
        nop


        // save integer regs R4-r31
        SAVE_GPR(r4,CNS_Q_GPR+0x20,r1)
        SAVE_GPR(r5,CNS_Q_GPR+0x28,r1)
        SAVE_GPR(r6,CNS_Q_GPR+0x30,r1)
        SAVE_GPR(r7,CNS_Q_GPR+0x38,r1)
        SAVE_GPR(r8,CNS_Q_GPR+0x40,r1)
        SAVE_GPR(r9,CNS_Q_GPR+0x48,r1)
        SAVE_GPR(r10,CNS_Q_GPR+0x50,r1)
        SAVE_GPR(r11,CNS_Q_GPR+0x58,r1)
        SAVE_GPR(r12,CNS_Q_GPR+0x60,r1)
        SAVE_GPR(r13,CNS_Q_GPR+0x68,r1)
        SAVE_GPR(r14,CNS_Q_GPR+0x70,r1)
        SAVE_GPR(r15,CNS_Q_GPR+0x78,r1)
        SAVE_GPR(r16,CNS_Q_GPR+0x80,r1)
        SAVE_GPR(r17,CNS_Q_GPR+0x88,r1)
        SAVE_GPR(r18,CNS_Q_GPR+0x90,r1)
        SAVE_GPR(r19,CNS_Q_GPR+0x98,r1)
        SAVE_GPR(r20,CNS_Q_GPR+0xA0,r1)
        SAVE_GPR(r21,CNS_Q_GPR+0xA8,r1)
        SAVE_GPR(r22,CNS_Q_GPR+0xB0,r1)
        SAVE_GPR(r23,CNS_Q_GPR+0xB8,r1)
        SAVE_GPR(r24,CNS_Q_GPR+0xC0,r1)
        SAVE_GPR(r25,CNS_Q_GPR+0xC8,r1)
        SAVE_GPR(r26,CNS_Q_GPR+0xD0,r1)
        SAVE_GPR(r27,CNS_Q_GPR+0xD8,r1)
        SAVE_GPR(r28,CNS_Q_GPR+0xE0,r1)
        SAVE_GPR(r29,CNS_Q_GPR+0xE8,r1)
        SAVE_GPR(r30,CNS_Q_GPR+0xF0,r1)
        SAVE_GPR(r31,CNS_Q_GPR+0xF8,r1)

        // save all paltemp regs except pt0

//orig	unfix_impure_gpr	r1		// adjust impure area pointer for gpr stores
//orig	fix_impure_ipr	r1			// adjust impure area pointer for pt stores

        lda	r1, -0x200(r1)		// Restore the impure base address.
        lda	r1, CNS_Q_IPR(r1)	// Point to the base of IPR area.
        SAVE_IPR(pt0,CNS_Q_PT+0x00,r1)		// the osf code didn't save/restore palTemp 0 ?? pboyle
        SAVE_IPR(pt1,CNS_Q_PT+0x08,r1)
        SAVE_IPR(pt2,CNS_Q_PT+0x10,r1)
        SAVE_IPR(pt3,CNS_Q_PT+0x18,r1)
        SAVE_IPR(pt4,CNS_Q_PT+0x20,r1)
        SAVE_IPR(pt5,CNS_Q_PT+0x28,r1)
        SAVE_IPR(pt6,CNS_Q_PT+0x30,r1)
        SAVE_IPR(pt7,CNS_Q_PT+0x38,r1)
        SAVE_IPR(pt8,CNS_Q_PT+0x40,r1)
        SAVE_IPR(pt9,CNS_Q_PT+0x48,r1)
        SAVE_IPR(pt10,CNS_Q_PT+0x50,r1)
        SAVE_IPR(pt11,CNS_Q_PT+0x58,r1)
        SAVE_IPR(pt12,CNS_Q_PT+0x60,r1)
        SAVE_IPR(pt13,CNS_Q_PT+0x68,r1)
        SAVE_IPR(pt14,CNS_Q_PT+0x70,r1)
        SAVE_IPR(pt15,CNS_Q_PT+0x78,r1)
        SAVE_IPR(pt16,CNS_Q_PT+0x80,r1)
        SAVE_IPR(pt17,CNS_Q_PT+0x88,r1)
        SAVE_IPR(pt18,CNS_Q_PT+0x90,r1)
        SAVE_IPR(pt19,CNS_Q_PT+0x98,r1)
        SAVE_IPR(pt20,CNS_Q_PT+0xA0,r1)
        SAVE_IPR(pt21,CNS_Q_PT+0xA8,r1)
        SAVE_IPR(pt22,CNS_Q_PT+0xB0,r1)
        SAVE_IPR(pt23,CNS_Q_PT+0xB8,r1)

        // Restore shadow mode
        mfpr	r31, pt0		// pad write to icsr out of shadow of store (trap does not abort write)
        mfpr	r31, pt0
        mtpr	r2, icsr		// Restore original ICSR

        mfpr	r31, pt0		// SDE bubble cycle 1
        mfpr	r31, pt0		// SDE bubble cycle 2
        mfpr	r31, pt0		// SDE bubble cycle 3
        nop

        // save all integer shadow regs
        SAVE_SHADOW( r8,CNS_Q_SHADOW+0x00,r1)	// also called p0...p7 in the Hudson code
        SAVE_SHADOW( r9,CNS_Q_SHADOW+0x08,r1)
        SAVE_SHADOW(r10,CNS_Q_SHADOW+0x10,r1)
        SAVE_SHADOW(r11,CNS_Q_SHADOW+0x18,r1)
        SAVE_SHADOW(r12,CNS_Q_SHADOW+0x20,r1)
        SAVE_SHADOW(r13,CNS_Q_SHADOW+0x28,r1)
        SAVE_SHADOW(r14,CNS_Q_SHADOW+0x30,r1)
        SAVE_SHADOW(r25,CNS_Q_SHADOW+0x38,r1)

        SAVE_IPR(excAddr,CNS_Q_EXC_ADDR,r1)
        SAVE_IPR(palBase,CNS_Q_PAL_BASE,r1)
        SAVE_IPR(mmStat,CNS_Q_MM_STAT,r1)
        SAVE_IPR(va,CNS_Q_VA,r1)
        SAVE_IPR(icsr,CNS_Q_ICSR,r1)
        SAVE_IPR(ipl,CNS_Q_IPL,r1)
        SAVE_IPR(ips,CNS_Q_IPS,r1)
        SAVE_IPR(itbAsn,CNS_Q_ITB_ASN,r1)
        SAVE_IPR(aster,CNS_Q_ASTER,r1)
        SAVE_IPR(astrr,CNS_Q_ASTRR,r1)
        SAVE_IPR(sirr,CNS_Q_SIRR,r1)
        SAVE_IPR(isr,CNS_Q_ISR,r1)
        SAVE_IPR(iVptBr,CNS_Q_IVPTBR,r1)
        SAVE_IPR(mcsr,CNS_Q_MCSR,r1)
        SAVE_IPR(dcMode,CNS_Q_DC_MODE,r1)

//orig	pvc_violate 379			// mf maf_mode after a store ok (pvc doesn't distinguish ld from st)
//orig	store_reg maf_mode,	ipr=1	// save ipr -- no mbox instructions for
//orig                                  // PVC violation applies only to
pvc$osf35$379:				    // loads. HW_ST ok here, so ignore
        SAVE_IPR(mafMode,CNS_Q_MAF_MODE,r1) // MBOX INST->MF MAF_MODE IN 0,1,2


        //the following iprs are informational only -- will not be restored

        SAVE_IPR(icPerr,CNS_Q_ICPERR_STAT,r1)
        SAVE_IPR(PmCtr,CNS_Q_PM_CTR,r1)
        SAVE_IPR(intId,CNS_Q_INT_ID,r1)
        SAVE_IPR(excSum,CNS_Q_EXC_SUM,r1)
        SAVE_IPR(excMask,CNS_Q_EXC_MASK,r1)
        ldah	r14, 0xFFF0(zero)
        zap	r14, 0xE0, r14		// Get base address of CBOX IPRs
        NOP				// Pad mfpr dcPerr out of shadow of
        NOP				// last store
        NOP
        SAVE_IPR(dcPerr,CNS_Q_DCPERR_STAT,r1)

        // read cbox ipr state

        mb
        ldq_p	r2, scCtl(r14)
        ldq_p	r13, ldLock(r14)
        ldq_p	r4, scAddr(r14)
        ldq_p	r5, eiAddr(r14)
        ldq_p	r6, bcTagAddr(r14)
        ldq_p	r7, fillSyn(r14)
        bis	r5, r4, zero		// Make sure all loads complete before
        bis	r7, r6, zero		// reading registers that unlock them.
        ldq_p	r8, scStat(r14)		// Unlocks scAddr.
        ldq_p	r9, eiStat(r14)		// Unlocks eiAddr, bcTagAddr, fillSyn.
        ldq_p	zero, eiStat(r14)	// Make sure it is really unlocked.
        mb

        // save cbox ipr state
        SAVE_SHADOW(r2,CNS_Q_SC_CTL,r1);
        SAVE_SHADOW(r13,CNS_Q_LD_LOCK,r1);
        SAVE_SHADOW(r4,CNS_Q_SC_ADDR,r1);
        SAVE_SHADOW(r5,CNS_Q_EI_ADDR,r1);
        SAVE_SHADOW(r6,CNS_Q_BC_TAG_ADDR,r1);
        SAVE_SHADOW(r7,CNS_Q_FILL_SYN,r1);
        SAVE_SHADOW(r8,CNS_Q_SC_STAT,r1);
        SAVE_SHADOW(r9,CNS_Q_EI_STAT,r1);
        //bc_config? sl_rcv?

// restore impure base
//orig	unfix_impure_ipr r1
        lda	r1, -CNS_Q_IPR(r1)

// save all floating regs
        mfpr	r0, icsr		// get icsr
        or	r31, 1, r2		// get a one
        sll	r2, icsr_v_fpe, r2	// Shift it into ICSR<FPE> position
        or	r2, r0, r0		// set FEN on
        mtpr	r0, icsr		// write to icsr, enabling FEN

// map the save area virtually
        mtpr	r31, dtbIa		// Clear all DTB entries
        srl	r1, va_s_off, r0	// Clean off byte-within-page offset
        sll	r0, pte_v_pfn, r0	// Shift to form PFN
        lda	r0, pte_m_prot(r0)	// Set all read/write enable bits
        mtpr	r0, dtbPte		// Load the PTE and set valid
        mtpr	r1, dtbTag		// Write the PTE and tag into the DTB


// map the next page too - in case the impure area crosses a page boundary
        lda	r4, (1<<va_s_off)(r1)	// Generate address for next page
        srl	r4, va_s_off, r0	// Clean off byte-within-page offset
        sll	r0, pte_v_pfn, r0	// Shift to form PFN
        lda	r0, pte_m_prot(r0)	// Set all read/write enable bits
        mtpr	r0, dtbPte		// Load the PTE and set valid
        mtpr	r4, dtbTag		// Write the PTE and tag into the DTB

        sll	r31, 0, r31		// stall cycle 1
        sll	r31, 0, r31		// stall cycle 2
        sll	r31, 0, r31		// stall cycle 3
        nop

// add offset for saving fpr regs
//orig	fix_impure_gpr r1
        lda	r1, 0x200(r1)		// Point to center of CPU segment

// now save the regs - F0-F31
        mf_fpcr  f0			// original

        SAVE_FPR(f0,CNS_Q_FPR+0x00,r1)
        SAVE_FPR(f1,CNS_Q_FPR+0x08,r1)
        SAVE_FPR(f2,CNS_Q_FPR+0x10,r1)
        SAVE_FPR(f3,CNS_Q_FPR+0x18,r1)
        SAVE_FPR(f4,CNS_Q_FPR+0x20,r1)
        SAVE_FPR(f5,CNS_Q_FPR+0x28,r1)
        SAVE_FPR(f6,CNS_Q_FPR+0x30,r1)
        SAVE_FPR(f7,CNS_Q_FPR+0x38,r1)
        SAVE_FPR(f8,CNS_Q_FPR+0x40,r1)
        SAVE_FPR(f9,CNS_Q_FPR+0x48,r1)
        SAVE_FPR(f10,CNS_Q_FPR+0x50,r1)
        SAVE_FPR(f11,CNS_Q_FPR+0x58,r1)
        SAVE_FPR(f12,CNS_Q_FPR+0x60,r1)
        SAVE_FPR(f13,CNS_Q_FPR+0x68,r1)
        SAVE_FPR(f14,CNS_Q_FPR+0x70,r1)
        SAVE_FPR(f15,CNS_Q_FPR+0x78,r1)
        SAVE_FPR(f16,CNS_Q_FPR+0x80,r1)
        SAVE_FPR(f17,CNS_Q_FPR+0x88,r1)
        SAVE_FPR(f18,CNS_Q_FPR+0x90,r1)
        SAVE_FPR(f19,CNS_Q_FPR+0x98,r1)
        SAVE_FPR(f20,CNS_Q_FPR+0xA0,r1)
        SAVE_FPR(f21,CNS_Q_FPR+0xA8,r1)
        SAVE_FPR(f22,CNS_Q_FPR+0xB0,r1)
        SAVE_FPR(f23,CNS_Q_FPR+0xB8,r1)
        SAVE_FPR(f24,CNS_Q_FPR+0xC0,r1)
        SAVE_FPR(f25,CNS_Q_FPR+0xC8,r1)
        SAVE_FPR(f26,CNS_Q_FPR+0xD0,r1)
        SAVE_FPR(f27,CNS_Q_FPR+0xD8,r1)
        SAVE_FPR(f28,CNS_Q_FPR+0xE0,r1)
        SAVE_FPR(f29,CNS_Q_FPR+0xE8,r1)
        SAVE_FPR(f30,CNS_Q_FPR+0xF0,r1)
        SAVE_FPR(f31,CNS_Q_FPR+0xF8,r1)

//switch impure offset from gpr to ipr---
//orig	unfix_impure_gpr	r1
//orig	fix_impure_ipr	r1
//orig	store_reg1 fpcsr, f0, r1, fpcsr=1

        SAVE_FPR(f0,CNS_Q_FPCSR,r1)	// fpcsr loaded above into f0 -- can it reach
        lda	r1, -0x200(r1)		// Restore the impure base address

// and back to gpr ---
//orig	unfix_impure_ipr	r1
//orig	fix_impure_gpr	r1

//orig	lda	r0, cns_mchksize(r31)	// get size of mchk area
//orig	store_reg1 mchkflag, r0, r1, ipr=1
//orig	mb

        lda	r1, CNS_Q_IPR(r1)	// Point to base of IPR area again
        // save this using the IPR base (it is closer) not the GRP base as they used...pb
        lda	r0, MACHINE_CHECK_SIZE(r31)	// get size of mchk area
        SAVE_SHADOW(r0,CNS_Q_MCHK,r1);
        mb

//orig	or	r31, 1, r0		// get a one
//orig	store_reg1 flag, r0, r1, ipr=1	// set dump area flag
//orig	mb

        lda	r1, -CNS_Q_IPR(r1)	// back to the base
        lda	r1, 0x200(r1)		// Point to center of CPU segment
        or	r31, 1, r0		// get a one
        SAVE_GPR(r0,CNS_Q_FLAG,r1)	// // set dump area valid flag
        mb

        // restore impure area base
//orig	unfix_impure_gpr r1
        lda	r1, -0x200(r1)		// Point to center of CPU segment

        mtpr	r31, dtb_ia		// clear the dtb
        mtpr	r31, itb_ia		// clear the itb

//orig	pvc_jsr	savsta, bsr=1, dest=1
        ret	r31, (r3)		// and back we go



// .sbttl  "PAL_RESTORE_STATE"
//
//
//	Pal_restore_state
//
//
//	register usage:
//		r1 = addr of impure area
//		r3 = return_address
//		all other regs are scratchable, as they are about to
//		be reloaded from ram.
//
//	Function:
//		All chip state restored, all SRs, FRs, PTs, IPRs
//					*** except R1, R3, PT0, PT4, PT5 ***
//
//
        ALIGN_BLOCK
pal_restore_state:

//need to restore sc_ctl,bc_ctl,bc_config??? if so, need to figure out a safe way to do so.

// map the console io area virtually
        mtpr	r31, dtbIa		// Clear all DTB entries
        srl	r1, va_s_off, r0	// Clean off byte-within-page offset
        sll	r0, pte_v_pfn, r0	// Shift to form PFN
        lda	r0, pte_m_prot(r0)	// Set all read/write enable bits
        mtpr	r0, dtbPte		// Load the PTE and set valid
        mtpr	r1, dtbTag		// Write the PTE and tag into the DTB


// map the next page too, in case impure area crosses page boundary
        lda	r4, (1<<VA_S_OFF)(r1)	// Generate address for next page
        srl	r4, va_s_off, r0	// Clean off byte-within-page offset
        sll	r0, pte_v_pfn, r0	// Shift to form PFN
        lda	r0, pte_m_prot(r0)	// Set all read/write enable bits
        mtpr	r0, dtbPte		// Load the PTE and set valid
        mtpr	r4, dtbTag		// Write the PTE and tag into the DTB

// save all floating regs
        mfpr	r0, icsr		// Get current ICSR
        bis	zero, 1, r2		// Get a '1'
        or	r2, (1<<(icsr_v_sde-icsr_v_fpe)), r2
        sll	r2, icsr_v_fpe, r2	// Shift bits into position
        bis	r2, r2, r0		// Set ICSR<SDE> and ICSR<FPE>
        mtpr	r0, icsr		// Update the chip

        mfpr	r31, pt0		// FPE bubble cycle 1		//orig
        mfpr	r31, pt0		// FPE bubble cycle 2		//orig
        mfpr	r31, pt0		// FPE bubble cycle 3		//orig

//orig	fix_impure_ipr r1
//orig	restore_reg1 fpcsr, f0, r1, fpcsr=1
//orig	mt_fpcr  f0
//orig
//orig	unfix_impure_ipr r1
//orig	fix_impure_gpr r1		// adjust impure pointer offset for gpr access
        lda	r1, 200(r1)	// Point to base of IPR area again
        RESTORE_FPR(f0,CNS_Q_FPCSR,r1)		// can it reach?? pb
        mt_fpcr  f0			// original

        lda	r1, 0x200(r1)		// point to center of CPU segment

// restore all floating regs
        RESTORE_FPR(f0,CNS_Q_FPR+0x00,r1)
        RESTORE_FPR(f1,CNS_Q_FPR+0x08,r1)
        RESTORE_FPR(f2,CNS_Q_FPR+0x10,r1)
        RESTORE_FPR(f3,CNS_Q_FPR+0x18,r1)
        RESTORE_FPR(f4,CNS_Q_FPR+0x20,r1)
        RESTORE_FPR(f5,CNS_Q_FPR+0x28,r1)
        RESTORE_FPR(f6,CNS_Q_FPR+0x30,r1)
        RESTORE_FPR(f7,CNS_Q_FPR+0x38,r1)
        RESTORE_FPR(f8,CNS_Q_FPR+0x40,r1)
        RESTORE_FPR(f9,CNS_Q_FPR+0x48,r1)
        RESTORE_FPR(f10,CNS_Q_FPR+0x50,r1)
        RESTORE_FPR(f11,CNS_Q_FPR+0x58,r1)
        RESTORE_FPR(f12,CNS_Q_FPR+0x60,r1)
        RESTORE_FPR(f13,CNS_Q_FPR+0x68,r1)
        RESTORE_FPR(f14,CNS_Q_FPR+0x70,r1)
        RESTORE_FPR(f15,CNS_Q_FPR+0x78,r1)
        RESTORE_FPR(f16,CNS_Q_FPR+0x80,r1)
        RESTORE_FPR(f17,CNS_Q_FPR+0x88,r1)
        RESTORE_FPR(f18,CNS_Q_FPR+0x90,r1)
        RESTORE_FPR(f19,CNS_Q_FPR+0x98,r1)
        RESTORE_FPR(f20,CNS_Q_FPR+0xA0,r1)
        RESTORE_FPR(f21,CNS_Q_FPR+0xA8,r1)
        RESTORE_FPR(f22,CNS_Q_FPR+0xB0,r1)
        RESTORE_FPR(f23,CNS_Q_FPR+0xB8,r1)
        RESTORE_FPR(f24,CNS_Q_FPR+0xC0,r1)
        RESTORE_FPR(f25,CNS_Q_FPR+0xC8,r1)
        RESTORE_FPR(f26,CNS_Q_FPR+0xD0,r1)
        RESTORE_FPR(f27,CNS_Q_FPR+0xD8,r1)
        RESTORE_FPR(f28,CNS_Q_FPR+0xE0,r1)
        RESTORE_FPR(f29,CNS_Q_FPR+0xE8,r1)
        RESTORE_FPR(f30,CNS_Q_FPR+0xF0,r1)
        RESTORE_FPR(f31,CNS_Q_FPR+0xF8,r1)

// switch impure pointer from gpr to ipr area --
//orig	unfix_impure_gpr r1
//orig	fix_impure_ipr r1
        lda	r1, -0x200(r1)		// Restore base address of impure area.
        lda	r1, CNS_Q_IPR(r1)	// Point to base of IPR area.

// restore all pal regs
        RESTORE_IPR(pt0,CNS_Q_PT+0x00,r1)		// the osf code didn't save/restore palTemp 0 ?? pboyle
        RESTORE_IPR(pt1,CNS_Q_PT+0x08,r1)
        RESTORE_IPR(pt2,CNS_Q_PT+0x10,r1)
        RESTORE_IPR(pt3,CNS_Q_PT+0x18,r1)
        RESTORE_IPR(pt4,CNS_Q_PT+0x20,r1)
        RESTORE_IPR(pt5,CNS_Q_PT+0x28,r1)
        RESTORE_IPR(pt6,CNS_Q_PT+0x30,r1)
        RESTORE_IPR(pt7,CNS_Q_PT+0x38,r1)
        RESTORE_IPR(pt8,CNS_Q_PT+0x40,r1)
        RESTORE_IPR(pt9,CNS_Q_PT+0x48,r1)
        RESTORE_IPR(pt10,CNS_Q_PT+0x50,r1)
        RESTORE_IPR(pt11,CNS_Q_PT+0x58,r1)
        RESTORE_IPR(pt12,CNS_Q_PT+0x60,r1)
        RESTORE_IPR(pt13,CNS_Q_PT+0x68,r1)
        RESTORE_IPR(pt14,CNS_Q_PT+0x70,r1)
        RESTORE_IPR(pt15,CNS_Q_PT+0x78,r1)
        RESTORE_IPR(pt16,CNS_Q_PT+0x80,r1)
        RESTORE_IPR(pt17,CNS_Q_PT+0x88,r1)
        RESTORE_IPR(pt18,CNS_Q_PT+0x90,r1)
        RESTORE_IPR(pt19,CNS_Q_PT+0x98,r1)
        RESTORE_IPR(pt20,CNS_Q_PT+0xA0,r1)
        RESTORE_IPR(pt21,CNS_Q_PT+0xA8,r1)
        RESTORE_IPR(pt22,CNS_Q_PT+0xB0,r1)
        RESTORE_IPR(pt23,CNS_Q_PT+0xB8,r1)


//orig	restore_reg exc_addr,	ipr=1	// restore ipr
//orig	restore_reg pal_base,	ipr=1	// restore ipr
//orig	restore_reg ipl,	ipr=1	// restore ipr
//orig	restore_reg ps,		ipr=1	// restore ipr
//orig	mtpr	r0, dtb_cm		// set current mode in mbox too
//orig	restore_reg itb_asn,	ipr=1
//orig	srl	r0, itb_asn_v_asn, r0
//orig	sll	r0, dtb_asn_v_asn, r0
//orig	mtpr	r0, dtb_asn		// set ASN in Mbox too
//orig	restore_reg ivptbr,	ipr=1
//orig	mtpr	r0, mvptbr			// use ivptbr value to restore mvptbr
//orig	restore_reg mcsr,	ipr=1
//orig	restore_reg aster,	ipr=1
//orig	restore_reg astrr,	ipr=1
//orig	restore_reg sirr,	ipr=1
//orig	restore_reg maf_mode, 	ipr=1		// no mbox instruction for 3 cycles
//orig	mfpr	r31, pt0			// (may issue with mt maf_mode)
//orig	mfpr	r31, pt0			// bubble cycle 1
//orig	mfpr	r31, pt0                        // bubble cycle 2
//orig	mfpr	r31, pt0                        // bubble cycle 3
//orig	mfpr	r31, pt0			// (may issue with following ld)

        // r0 gets the value of RESTORE_IPR in the macro and this code uses this side effect (gag)
        RESTORE_IPR(excAddr,CNS_Q_EXC_ADDR,r1)
        RESTORE_IPR(palBase,CNS_Q_PAL_BASE,r1)
        RESTORE_IPR(ipl,CNS_Q_IPL,r1)
        RESTORE_IPR(ips,CNS_Q_IPS,r1)
        mtpr	r0, dtbCm			// Set Mbox current mode too.
        RESTORE_IPR(itbAsn,CNS_Q_ITB_ASN,r1)
        srl	r0, 4, r0
        sll	r0, 57, r0
        mtpr	r0, dtbAsn			// Set Mbox ASN too
        RESTORE_IPR(iVptBr,CNS_Q_IVPTBR,r1)
        mtpr	r0, mVptBr			// Set Mbox VptBr too
        RESTORE_IPR(mcsr,CNS_Q_MCSR,r1)
        RESTORE_IPR(aster,CNS_Q_ASTER,r1)
        RESTORE_IPR(astrr,CNS_Q_ASTRR,r1)
        RESTORE_IPR(sirr,CNS_Q_SIRR,r1)
        RESTORE_IPR(mafMode,CNS_Q_MAF_MODE,r1)
        STALL
        STALL
        STALL
        STALL
        STALL


        // restore all integer shadow regs
        RESTORE_SHADOW( r8,CNS_Q_SHADOW+0x00,r1)	// also called p0...p7 in the Hudson code
        RESTORE_SHADOW( r9,CNS_Q_SHADOW+0x08,r1)
        RESTORE_SHADOW(r10,CNS_Q_SHADOW+0x10,r1)
        RESTORE_SHADOW(r11,CNS_Q_SHADOW+0x18,r1)
        RESTORE_SHADOW(r12,CNS_Q_SHADOW+0x20,r1)
        RESTORE_SHADOW(r13,CNS_Q_SHADOW+0x28,r1)
        RESTORE_SHADOW(r14,CNS_Q_SHADOW+0x30,r1)
        RESTORE_SHADOW(r25,CNS_Q_SHADOW+0x38,r1)
        RESTORE_IPR(dcMode,CNS_Q_DC_MODE,r1)

        //
        // Get out of shadow mode
        //

        mfpr	r31, pt0		// pad last load to icsr write (in case of replay, icsr will be written anyway)
        mfpr	r31, pt0		// ""
        mfpr	r0, icsr		// Get icsr
        ldah	r2,  (1<<(ICSR_V_SDE-16))(r31)	// Get a one in SHADOW_ENABLE bit location
        bic	r0, r2, r2		// ICSR with SDE clear
        mtpr	r2, icsr		// Turn off SDE - no palshadow rd/wr for 3 bubble cycles

        mfpr	r31, pt0		// SDE bubble cycle 1
        mfpr	r31, pt0		// SDE bubble cycle 2
        mfpr	r31, pt0		// SDE bubble cycle 3
        nop

// switch impure pointer from ipr to gpr area --
//orig	unfix_impure_ipr	r1
//orig	fix_impure_gpr	r1

// Restore GPRs (r0, r2 are restored later, r1 and r3 are trashed) ...

        lda	r1, -CNS_Q_IPR(r1)	// Restore base address of impure area
        lda	r1, 0x200(r1)		// Point to center of CPU segment

        // restore all integer regs
        RESTORE_GPR(r4,CNS_Q_GPR+0x20,r1)
        RESTORE_GPR(r5,CNS_Q_GPR+0x28,r1)
        RESTORE_GPR(r6,CNS_Q_GPR+0x30,r1)
        RESTORE_GPR(r7,CNS_Q_GPR+0x38,r1)
        RESTORE_GPR(r8,CNS_Q_GPR+0x40,r1)
        RESTORE_GPR(r9,CNS_Q_GPR+0x48,r1)
        RESTORE_GPR(r10,CNS_Q_GPR+0x50,r1)
        RESTORE_GPR(r11,CNS_Q_GPR+0x58,r1)
        RESTORE_GPR(r12,CNS_Q_GPR+0x60,r1)
        RESTORE_GPR(r13,CNS_Q_GPR+0x68,r1)
        RESTORE_GPR(r14,CNS_Q_GPR+0x70,r1)
        RESTORE_GPR(r15,CNS_Q_GPR+0x78,r1)
        RESTORE_GPR(r16,CNS_Q_GPR+0x80,r1)
        RESTORE_GPR(r17,CNS_Q_GPR+0x88,r1)
        RESTORE_GPR(r18,CNS_Q_GPR+0x90,r1)
        RESTORE_GPR(r19,CNS_Q_GPR+0x98,r1)
        RESTORE_GPR(r20,CNS_Q_GPR+0xA0,r1)
        RESTORE_GPR(r21,CNS_Q_GPR+0xA8,r1)
        RESTORE_GPR(r22,CNS_Q_GPR+0xB0,r1)
        RESTORE_GPR(r23,CNS_Q_GPR+0xB8,r1)
        RESTORE_GPR(r24,CNS_Q_GPR+0xC0,r1)
        RESTORE_GPR(r25,CNS_Q_GPR+0xC8,r1)
        RESTORE_GPR(r26,CNS_Q_GPR+0xD0,r1)
        RESTORE_GPR(r27,CNS_Q_GPR+0xD8,r1)
        RESTORE_GPR(r28,CNS_Q_GPR+0xE0,r1)
        RESTORE_GPR(r29,CNS_Q_GPR+0xE8,r1)
        RESTORE_GPR(r30,CNS_Q_GPR+0xF0,r1)
        RESTORE_GPR(r31,CNS_Q_GPR+0xF8,r1)

//orig	// switch impure pointer from gpr to ipr area --
//orig	unfix_impure_gpr	r1
//orig	fix_impure_ipr	r1
//orig	restore_reg icsr, ipr=1		// restore original icsr- 4 bubbles to hw_rei

        lda	t0, -0x200(t0)		// Restore base address of impure area.
        lda	t0, CNS_Q_IPR(t0)	// Point to base of IPR area again.
        RESTORE_IPR(icsr,CNS_Q_ICSR,r1)

//orig	// and back again --
//orig	unfix_impure_ipr	r1
//orig	fix_impure_gpr	r1
//orig	store_reg1 	flag, r31, r1, ipr=1 // clear dump area valid flag
//orig	mb

        lda	t0, -CNS_Q_IPR(t0)	// Back to base of impure area again,
        lda	t0, 0x200(t0)		// and back to center of CPU segment
        SAVE_GPR(r31,CNS_Q_FLAG,r1)	// Clear the dump area valid flag
        mb

//orig	// and back we go
//orig//	restore_reg 3
//orig	restore_reg 2
//orig//	restore_reg 1
//orig	restore_reg 0
//orig	// restore impure area base
//orig	unfix_impure_gpr r1

        RESTORE_GPR(r2,CNS_Q_GPR+0x10,r1)
        RESTORE_GPR(r0,CNS_Q_GPR+0x00,r1)
        lda	r1, -0x200(r1)		// Restore impure base address

        mfpr	r31, pt0		// stall for ldq_p above		//orig

        mtpr	r31, dtb_ia		// clear the tb			//orig
        mtpr	r31, itb_ia		// clear the itb		//orig

//orig	pvc_jsr	rststa, bsr=1, dest=1
        ret	r31, (r3)		// back we go			//orig


//
// pal_pal_bug_check -- code has found a bugcheck situation.
//	Set things up and join common machine check flow.
//
// Input:
//	r14 	- exc_addr
//
// On exit:
//	pt0	- saved r0
//	pt1	- saved	r1
//	pt4	- saved r4
//	pt5	- saved r5
//	pt6	- saved r6
//	pt10	- saved exc_addr
//       pt_misc<47:32> - mchk code
//       pt_misc<31:16> - scb vector
//	r14	- base of Cbox IPRs in IO space
//	MCES<mchk> is set
//

                ALIGN_BLOCK
        .globl pal_pal_bug_check_from_int
pal_pal_bug_check_from_int:
        DEBUGSTORE(0x79)
//simos	DEBUG_EXC_ADDR()
        DEBUGSTORE(0x20)
//simos	bsr	r25, put_hex
        lda	r25, mchk_c_bugcheck(r31)
        addq	r25, 1, r25			// set flag indicating we came from interrupt and stack is already pushed
        br	r31, pal_pal_mchk
        nop

pal_pal_bug_check:
        lda     r25, mchk_c_bugcheck(r31)

pal_pal_mchk:
        sll	r25, 32, r25			// Move mchk code to position

        mtpr	r14, pt10			// Stash exc_addr
        mtpr	r14, exc_addr

        mfpr	r12, pt_misc			// Get MCES and scratch
        zap	r12, 0x3c, r12

        or	r12, r25, r12			// Combine mchk code
        lda	r25, scb_v_procmchk(r31)	// Get SCB vector

        sll	r25, 16, r25			// Move SCBv to position
        or	r12, r25, r25			// Combine SCBv

        mtpr	r0, pt0				// Stash for scratch
        bis	r25, mces_m_mchk, r25	// Set MCES<MCHK> bit

        mtpr	r25, pt_misc			// Save mchk code!scbv!whami!mces
        ldah	r14, 0xfff0(r31)

        mtpr	r1, pt1				// Stash for scratch
        zap	r14, 0xE0, r14			// Get Cbox IPR base

        mtpr	r4, pt4
        mtpr	r5, pt5

        mtpr	r6, pt6
        blbs	r12, sys_double_machine_check   // MCHK halt if double machine check

        br	r31, sys_mchk_collect_iprs	// Join common machine check flow



//	align_to_call_pal_section
//      Align to address of first call_pal entry point - 2000

//
// HALT	- PALcode for HALT instruction
//
// Entry:
//	Vectored into via hardware PALcode instruction dispatch.
//
// Function:
//	GO to console code
//
//

        .text	1
//	. = 0x2000
       CALL_PAL_PRIV(PAL_HALT_ENTRY)
call_pal_halt:
        mfpr	r31, pt0		// Pad exc_addr read
        mfpr	r31, pt0

        mfpr	r12, exc_addr		// get PC
        subq	r12, 4, r12		// Point to the HALT

        mtpr	r12, exc_addr
        mtpr	r0, pt0

//orig	pvc_jsr updpcb, bsr=1
        bsr    r0, pal_update_pcb      	// update the pcb
        lda    r0, hlt_c_sw_halt(r31)  	// set halt code to sw halt
        br     r31, sys_enter_console  	// enter the console

//
// CFLUSH - PALcode for CFLUSH instruction
//
// Entry:
//	Vectored into via hardware PALcode instruction dispatch.
//
//	R16 - contains the PFN of the page to be flushed
//
// Function:
//	Flush all Dstream caches of 1 entire page
//	The CFLUSH routine is in the system specific module.
//
//

        CALL_PAL_PRIV(PAL_CFLUSH_ENTRY)
Call_Pal_Cflush:
        br	r31, sys_cflush

//
// DRAINA	- PALcode for DRAINA instruction
//
// Entry:
//	Vectored into via hardware PALcode instruction dispatch.
//	Implicit TRAPB performed by hardware.
//
// Function:
//	Stall instruction issue until all prior instructions are guaranteed to
//	complete without incurring aborts.  For the EV5 implementation, this
//	means waiting until all pending DREADS are returned.
//
//

        CALL_PAL_PRIV(PAL_DRAINA_ENTRY)
Call_Pal_Draina:
        ldah	r14, 0x100(r31)		// Init counter.  Value?
        nop

DRAINA_LOOP:
        subq	r14, 1, r14		// Decrement counter
        mfpr	r13, ev5__maf_mode	// Fetch status bit

        srl	r13, maf_mode_v_dread_pending, r13
        ble	r14, DRAINA_LOOP_TOO_LONG

        nop
        blbs	r13, DRAINA_LOOP	// Wait until all DREADS clear

        hw_rei

DRAINA_LOOP_TOO_LONG:
        br	r31, call_pal_halt

// CALL_PAL OPCDECs

        CALL_PAL_PRIV(0x0003)
CallPal_OpcDec03:
        br	r31, osfpal_calpal_opcdec

        CALL_PAL_PRIV(0x0004)
CallPal_OpcDec04:
        br	r31, osfpal_calpal_opcdec

        CALL_PAL_PRIV(0x0005)
CallPal_OpcDec05:
        br	r31, osfpal_calpal_opcdec

        CALL_PAL_PRIV(0x0006)
CallPal_OpcDec06:
        br	r31, osfpal_calpal_opcdec

        CALL_PAL_PRIV(0x0007)
CallPal_OpcDec07:
        br	r31, osfpal_calpal_opcdec

        CALL_PAL_PRIV(0x0008)
CallPal_OpcDec08:
        br	r31, osfpal_calpal_opcdec

//
// CSERVE - PALcode for CSERVE instruction
//
// Entry:
//	Vectored into via hardware PALcode instruction dispatch.
//
// Function:
//       Various functions for private use of console software
//
//       option selector in r0
//       arguments in r16....
//	The CSERVE routine is in the system specific module.
//
//

        CALL_PAL_PRIV(PAL_CSERVE_ENTRY)
Call_Pal_Cserve:
        br	r31, sys_cserve

//
// swppal - PALcode for swppal instruction
//
// Entry:
//	Vectored into via hardware PALcode instruction dispatch.
//       Vectored into via hardware PALcode instruction dispatch.
//               R16 contains the new PAL identifier
//               R17:R21 contain implementation-specific entry parameters
//
//               R0  receives status:
//                0 success (PAL was switched)
//                1 unknown PAL variant
//                2 known PAL variant, but PAL not loaded
//
//
// Function:
//       Swap control to another PAL.
//

        CALL_PAL_PRIV(PAL_SWPPAL_ENTRY)
Call_Pal_Swppal:
        cmpule	r16, 255, r0		// see if a kibble was passed
        cmoveq  r16, r16, r0            // if r16=0 then a valid address (ECO 59)

        or	r16, r31, r3		// set r3 incase this is a address
        blbc	r0, swppal_cont		// nope, try it as an address

        cmpeq	r16, 2, r0		// is it our friend OSF?
        blbc	r0, swppal_fail		// nope, don't know this fellow

        br	r2, CALL_PAL_SWPPAL_10_			// tis our buddy OSF

//	.global	osfpal_hw_entry_reset
//	.weak	osfpal_hw_entry_reset
//	.long	<osfpal_hw_entry_reset-pal_start>
//orig	halt				// don't know how to get the address here - kludge ok, load pal at 0
        .long	0			// ?? hack upon hack...pb

CALL_PAL_SWPPAL_10_: 	ldl_p	r3, 0(r2)		// fetch target addr
//	ble	r3, swppal_fail		; if OSF not linked in say not loaded.
        mfpr	r2, pal_base		// fetch pal base

        addq	r2, r3, r3		// add pal base
        lda	r2, 0x3FFF(r31)		// get pal base checker mask

        and	r3, r2, r2		// any funky bits set?
        cmpeq	r2, 0, r0		//

        blbc	r0, swppal_fail		// return unknown if bad bit set.
        br	r31, swppal_cont

// .sbttl	"CALL_PAL OPCDECs"

        CALL_PAL_PRIV(0x000B)
CallPal_OpcDec0B:
        br	r31, osfpal_calpal_opcdec

        CALL_PAL_PRIV(0x000C)
CallPal_OpcDec0C:
        br	r31, osfpal_calpal_opcdec

//
// wripir - PALcode for wripir instruction
//
// Entry:
//	Vectored into via hardware PALcode instruction dispatch.
//	r16 = processor number to interrupt
//
// Function:
//	IPIR	<- R16
//	Handled in system-specific code
//
// Exit:
//	interprocessor interrupt is recorded on the target processor
//	and is initiated when the proper enabling conditions are present.
//

        CALL_PAL_PRIV(PAL_WRIPIR_ENTRY)
Call_Pal_Wrpir:
        br	r31, sys_wripir

// .sbttl	"CALL_PAL OPCDECs"

        CALL_PAL_PRIV(0x000E)
CallPal_OpcDec0E:
        br	r31, osfpal_calpal_opcdec

        CALL_PAL_PRIV(0x000F)
CallPal_OpcDec0F:
        br	r31, osfpal_calpal_opcdec

//
// rdmces - PALcode for rdmces instruction
//
// Entry:
//	Vectored into via hardware PALcode instruction dispatch.
//
// Function:
//	R0 <- ZEXT(MCES)
//

        CALL_PAL_PRIV(PAL_RDMCES_ENTRY)
Call_Pal_Rdmces:
        mfpr	r0, pt_mces		// Read from PALtemp
        and	r0, mces_m_all, r0	// Clear other bits

        hw_rei

//
// wrmces - PALcode for wrmces instruction
//
// Entry:
//	Vectored into via hardware PALcode instruction dispatch.
//
// Function:
//	If {R16<0> EQ 1} then MCES<0> <- 0 (MCHK)
//	If {R16<1> EQ 1} then MCES<1> <- 0 (SCE)
//	If {R16<2> EQ 1} then MCES<2> <- 0 (PCE)
//	MCES<3> <- R16<3>		   (DPC)
//	MCES<4> <- R16<4>		   (DSC)
//
//

        CALL_PAL_PRIV(PAL_WRMCES_ENTRY)
Call_Pal_Wrmces:
        and	r16, ((1<<mces_v_mchk) | (1<<mces_v_sce) | (1<<mces_v_pce)), r13	// Isolate MCHK, SCE, PCE
        mfpr	r14, pt_mces		// Get current value

        ornot	r31, r13, r13		// Flip all the bits
        and	r16, ((1<<mces_v_dpc) | (1<<mces_v_dsc)), r17

        and	r14, r13, r1		// Update MCHK, SCE, PCE
        bic	r1, ((1<<mces_v_dpc) | (1<<mces_v_dsc)), r1	// Clear old DPC, DSC

        or	r1, r17, r1		// Update DPC and DSC
        mtpr	r1, pt_mces		// Write MCES back

        nop				// Pad to fix PT write->read restriction

        nop
        hw_rei



// CALL_PAL OPCDECs

        CALL_PAL_PRIV(0x0012)
CallPal_OpcDec12:
        br	r31, osfpal_calpal_opcdec

        CALL_PAL_PRIV(0x0013)
CallPal_OpcDec13:
        br	r31, osfpal_calpal_opcdec

        CALL_PAL_PRIV(0x0014)
CallPal_OpcDec14:
        br	r31, osfpal_calpal_opcdec

        CALL_PAL_PRIV(0x0015)
CallPal_OpcDec15:
        br	r31, osfpal_calpal_opcdec

        CALL_PAL_PRIV(0x0016)
CallPal_OpcDec16:
        br	r31, osfpal_calpal_opcdec

        CALL_PAL_PRIV(0x0017)
CallPal_OpcDec17:
        br	r31, osfpal_calpal_opcdec

        CALL_PAL_PRIV(0x0018)
CallPal_OpcDec18:
        br	r31, osfpal_calpal_opcdec

        CALL_PAL_PRIV(0x0019)
CallPal_OpcDec19:
        br	r31, osfpal_calpal_opcdec

        CALL_PAL_PRIV(0x001A)
CallPal_OpcDec1A:
        br	r31, osfpal_calpal_opcdec

        CALL_PAL_PRIV(0x001B)
CallPal_OpcDec1B:
        br	r31, osfpal_calpal_opcdec

        CALL_PAL_PRIV(0x001C)
CallPal_OpcDec1C:
        br	r31, osfpal_calpal_opcdec

        CALL_PAL_PRIV(0x001D)
CallPal_OpcDec1D:
        br	r31, osfpal_calpal_opcdec

        CALL_PAL_PRIV(0x001E)
CallPal_OpcDec1E:
        br	r31, osfpal_calpal_opcdec

        CALL_PAL_PRIV(0x001F)
CallPal_OpcDec1F:
        br	r31, osfpal_calpal_opcdec

        CALL_PAL_PRIV(0x0020)
CallPal_OpcDec20:
        br	r31, osfpal_calpal_opcdec

        CALL_PAL_PRIV(0x0021)
CallPal_OpcDec21:
        br	r31, osfpal_calpal_opcdec

        CALL_PAL_PRIV(0x0022)
CallPal_OpcDec22:
        br	r31, osfpal_calpal_opcdec

        CALL_PAL_PRIV(0x0023)
CallPal_OpcDec23:
        br	r31, osfpal_calpal_opcdec

        CALL_PAL_PRIV(0x0024)
CallPal_OpcDec24:
        br	r31, osfpal_calpal_opcdec

        CALL_PAL_PRIV(0x0025)
CallPal_OpcDec25:
        br	r31, osfpal_calpal_opcdec

        CALL_PAL_PRIV(0x0026)
CallPal_OpcDec26:
        br	r31, osfpal_calpal_opcdec

        CALL_PAL_PRIV(0x0027)
CallPal_OpcDec27:
        br	r31, osfpal_calpal_opcdec

        CALL_PAL_PRIV(0x0028)
CallPal_OpcDec28:
        br	r31, osfpal_calpal_opcdec

        CALL_PAL_PRIV(0x0029)
CallPal_OpcDec29:
        br	r31, osfpal_calpal_opcdec

        CALL_PAL_PRIV(0x002A)
CallPal_OpcDec2A:
        br	r31, osfpal_calpal_opcdec

//
// wrfen - PALcode for wrfen instruction
//
// Entry:
//	Vectored into via hardware PALcode instruction dispatch.
//
// Function:
//	a0<0> -> ICSR<FPE>
//	Store new FEN in PCB
//	Final value of t0 (r1), t8..t10 (r22..r24) and a0 (r16)
//          are UNPREDICTABLE
//
// Issue: What about pending FP loads when FEN goes from on->off????
//

        CALL_PAL_PRIV(PAL_WRFEN_ENTRY)
Call_Pal_Wrfen:
        or	r31, 1, r13		// Get a one
        mfpr	r1, ev5__icsr		// Get current FPE

        sll	r13, icsr_v_fpe, r13	// shift 1 to icsr<fpe> spot, e0
        and	r16, 1, r16		// clean new fen

        sll	r16, icsr_v_fpe, r12	// shift new fen to correct bit position
        bic	r1, r13, r1		// zero icsr<fpe>

        or	r1, r12, r1		// Or new FEN into ICSR
        mfpr	r12, pt_pcbb		// Get PCBB - E1

        mtpr	r1, ev5__icsr		// write new ICSR.  3 Bubble cycles to HW_REI
        stl_p	r16, osfpcb_q_fen(r12)	// Store FEN in PCB.

        mfpr	r31, pt0		// Pad ICSR<FPE> write.
        mfpr	r31, pt0

        mfpr	r31, pt0
//	pvc_violate 	225		// cuz PVC can't distinguish which bits changed
        hw_rei


        CALL_PAL_PRIV(0x002C)
CallPal_OpcDec2C:
        br	r31, osfpal_calpal_opcdec

//
// wrvptpr - PALcode for wrvptpr instruction
//
// Entry:
//	Vectored into via hardware PALcode instruction dispatch.
//
// Function:
//	vptptr <- a0 (r16)
//

        CALL_PAL_PRIV(PAL_WRVPTPTR_ENTRY)
Call_Pal_Wrvptptr:
        mtpr    r16, ev5__mvptbr                // Load Mbox copy
        mtpr    r16, ev5__ivptbr                // Load Ibox copy
        nop                                     // Pad IPR write
        nop
        hw_rei

        CALL_PAL_PRIV(0x002E)
CallPal_OpcDec2E:
        br	r31, osfpal_calpal_opcdec

        CALL_PAL_PRIV(0x002F)
CallPal_OpcDec2F:
        br	r31, osfpal_calpal_opcdec


//
// swpctx - PALcode for swpctx instruction
//
// Entry:
//       hardware dispatch via callPal instruction
//       R16 -> new pcb
//
// Function:
//       dynamic state moved to old pcb
//       new state loaded from new pcb
//       pcbb pointer set
//       old pcbb returned in R0
//
//  Note: need to add perf monitor stuff
//

        CALL_PAL_PRIV(PAL_SWPCTX_ENTRY)
Call_Pal_Swpctx:
        rpcc	r13			// get cyccounter
        mfpr	r0, pt_pcbb		// get pcbb

        ldq_p	r22, osfpcb_q_fen(r16)	// get new fen/pme
        ldq_p	r23, osfpcb_l_cc(r16)	// get new asn

        srl	r13, 32, r25		// move offset
        mfpr	r24, pt_usp		// get usp

        stq_p	r30, osfpcb_q_ksp(r0)	// store old ksp
//	pvc_violate 379			// stq_p can't trap except replay.  only problem if mf same ipr in same shadow.
        mtpr	r16, pt_pcbb		// set new pcbb

        stq_p	r24, osfpcb_q_usp(r0)	// store usp
        addl	r13, r25, r25		// merge for new time

        stl_p	r25, osfpcb_l_cc(r0)	// save time
        ldah	r24, (1<<(icsr_v_fpe-16))(r31)

        and	r22, 1, r12		// isolate fen
        mfpr	r25, icsr		// get current icsr

        lda	r24, (1<<icsr_v_pmp)(r24)
        br	r31, swpctx_cont

//
// wrval - PALcode for wrval instruction
//
// Entry:
//	Vectored into via hardware PALcode instruction dispatch.
//
// Function:
//	sysvalue <- a0 (r16)
//

        CALL_PAL_PRIV(PAL_WRVAL_ENTRY)
Call_Pal_Wrval:
        nop
        mtpr	r16, pt_sysval		// Pad paltemp write
        nop
        nop
        hw_rei

//
// rdval - PALcode for rdval instruction
//
// Entry:
//	Vectored into via hardware PALcode instruction dispatch.
//
// Function:
//	v0 (r0) <- sysvalue
//

        CALL_PAL_PRIV(PAL_RDVAL_ENTRY)
Call_Pal_Rdval:
        nop
        mfpr	r0, pt_sysval
        nop
        hw_rei

//
// tbi - PALcode for tbi instruction
//
// Entry:
//	Vectored into via hardware PALcode instruction dispatch.
//
// Function:
//	TB invalidate
//       r16/a0 = TBI type
//       r17/a1 = Va for TBISx instructions
//

        CALL_PAL_PRIV(PAL_TBI_ENTRY)
Call_Pal_Tbi:
        addq	r16, 2, r16			// change range to 0-2
        br	r23, CALL_PAL_tbi_10_		// get our address

CALL_PAL_tbi_10_: cmpult	r16, 6, r22		// see if in range
        lda	r23, tbi_tbl-CALL_PAL_tbi_10_(r23)	// set base to start of table
        sll	r16, 4, r16		// * 16
        blbc	r22, CALL_PAL_tbi_30_		// go rei, if not

        addq	r23, r16, r23		// addr of our code
//orig	pvc_jsr	tbi
        jmp	r31, (r23)		// and go do it

CALL_PAL_tbi_30_:
        hw_rei
        nop

//
// wrent - PALcode for wrent instruction
//
// Entry:
//	Vectored into via hardware PALcode instruction dispatch.
//
// Function:
//	Update ent* in paltemps
//       r16/a0 = Address of entry routine
//       r17/a1 = Entry Number 0..5
//
//       r22, r23 trashed
//

        CALL_PAL_PRIV(PAL_WRENT_ENTRY)
Call_Pal_Wrent:
        cmpult	r17, 6, r22			// see if in range
        br	r23, CALL_PAL_wrent_10_		// get our address

CALL_PAL_wrent_10_:	bic	r16, 3, r16	// clean pc
        blbc	r22, CALL_PAL_wrent_30_		// go rei, if not in range

        lda	r23, wrent_tbl-CALL_PAL_wrent_10_(r23)	// set base to start of table
        sll	r17, 4, r17				// *16

        addq  	r17, r23, r23		// Get address in table
//orig	pvc_jsr	wrent
        jmp	r31, (r23)		// and go do it

CALL_PAL_wrent_30_:
        hw_rei				// out of range, just return

//
// swpipl - PALcode for swpipl instruction
//
// Entry:
//	Vectored into via hardware PALcode instruction dispatch.
//
// Function:
//	v0 (r0)  <- PS<IPL>
//	PS<IPL>  <- a0<2:0>  (r16)
//
//	t8 (r22) is scratch
//

        CALL_PAL_PRIV(PAL_SWPIPL_ENTRY)
Call_Pal_Swpipl:
        and	r16, osfps_m_ipl, r16	// clean New ipl
        mfpr	r22, pt_intmask		// get int mask

        extbl	r22, r16, r22		// get mask for this ipl
        bis	r11, r31, r0		// return old ipl

        bis	r16, r31, r11		// set new ps
        mtpr	r22, ev5__ipl		// set new mask

        mfpr	r31, pt0		// pad ipl write
        mfpr	r31, pt0		// pad ipl write

        hw_rei				// back

//
// rdps - PALcode for rdps instruction
//
// Entry:
//	Vectored into via hardware PALcode instruction dispatch.
//
// Function:
//	v0 (r0) <- ps
//

        CALL_PAL_PRIV(PAL_RDPS_ENTRY)
Call_Pal_Rdps:
        bis	r11, r31, r0		// Fetch PALshadow PS
        nop				// Must be 2 cycles long
        hw_rei

//
// wrkgp - PALcode for wrkgp instruction
//
// Entry:
//	Vectored into via hardware PALcode instruction dispatch.
//
// Function:
//	kgp <- a0 (r16)
//

        CALL_PAL_PRIV(PAL_WRKGP_ENTRY)
Call_Pal_Wrkgp:
        nop
        mtpr	r16, pt_kgp
        nop				// Pad for pt write->read restriction
        nop
        hw_rei

//
// wrusp - PALcode for wrusp instruction
//
// Entry:
//	Vectored into via hardware PALcode instruction dispatch.
//
// Function:
//       usp <- a0 (r16)
//

        CALL_PAL_PRIV(PAL_WRUSP_ENTRY)
Call_Pal_Wrusp:
        nop
        mtpr	r16, pt_usp
        nop				// Pad possible pt write->read restriction
        nop
        hw_rei

//
// wrperfmon - PALcode for wrperfmon instruction
//
// Entry:
//	Vectored into via hardware PALcode instruction dispatch.
//
//
// Function:
//	Various control functions for the onchip performance counters
//
//	option selector in r16
//	option argument in r17
//	returned status in r0
//
//
//	r16 = 0	Disable performance monitoring for one or more cpu's
//	  r17 = 0		disable no counters
//	  r17 = bitmask		disable counters specified in bit mask (1=disable)
//
//	r16 = 1	Enable performance monitoring for one or more cpu's
//	  r17 = 0		enable no counters
//	  r17 = bitmask		enable counters specified in bit mask (1=enable)
//
//	r16 = 2	Mux select for one or more cpu's
//	  r17 = Mux selection (cpu specific)
//    		<24:19>  	 bc_ctl<pm_mux_sel> field (see spec)
//		<31>,<7:4>,<3:0> pmctr <sel0>,<sel1>,<sel2> fields (see spec)
//
//	r16 = 3	Options
//	  r17 = (cpu specific)
//		<0> = 0 	log all processes
//		<0> = 1		log only selected processes
//		<30,9,8> 		mode select - ku,kp,kk
//
//	r16 = 4	Interrupt frequency select
//	  r17 = (cpu specific)	indicates interrupt frequencies desired for each
//				counter, with "zero interrupts" being an option
//				frequency info in r17 bits as defined by PMCTR_CTL<FRQx> below
//
//	r16 = 5	Read Counters
//	  r17 = na
//	  r0  = value (same format as ev5 pmctr)
//	        <0> = 0		Read failed
//	        <0> = 1		Read succeeded
//
//	r16 = 6	Write Counters
//	  r17 = value (same format as ev5 pmctr; all counters written simultaneously)
//
//	r16 = 7	Enable performance monitoring for one or more cpu's and reset counter to 0
//	  r17 = 0		enable no counters
//	  r17 = bitmask		enable & clear counters specified in bit mask (1=enable & clear)
//
//=============================================================================
//Assumptions:
//PMCTR_CTL:
//
//       <15:14>         CTL0 -- encoded frequency select and enable - CTR0
//       <13:12>         CTL1 --			"		   - CTR1
//       <11:10>         CTL2 --			"		   - CTR2
//
//       <9:8>           FRQ0 -- frequency select for CTR0 (no enable info)
//       <7:6>           FRQ1 -- frequency select for CTR1
//       <5:4>           FRQ2 -- frequency select for CTR2
//
//       <0>		all vs. select processes (0=all,1=select)
//
//     where
//	FRQx<1:0>
//	     0 1	disable interrupt
//	     1 0	frequency = 65536 (16384 for ctr2)
//	     1 1	frequency = 256
//	note:  FRQx<1:0> = 00 will keep counters from ever being enabled.
//
//=============================================================================
//
        CALL_PAL_PRIV(0x0039)
// unsupported in Hudson code .. pboyle Nov/95
CALL_PAL_Wrperfmon:
        // "real" performance monitoring code
        cmpeq	r16, 1, r0		// check for enable
        bne	r0, perfmon_en		// br if requested to enable

        cmpeq	r16, 2, r0		// check for mux ctl
        bne	r0, perfmon_muxctl	// br if request to set mux controls

        cmpeq	r16, 3, r0		// check for options
        bne	r0, perfmon_ctl		// br if request to set options

        cmpeq	r16, 4, r0		// check for interrupt frequency select
        bne	r0, perfmon_freq	// br if request to change frequency select

        cmpeq	r16, 5, r0		// check for counter read request
        bne	r0, perfmon_rd		// br if request to read counters

        cmpeq	r16, 6, r0		// check for counter write request
        bne	r0, perfmon_wr		// br if request to write counters

        cmpeq	r16, 7, r0		// check for counter clear/enable request
        bne	r0, perfmon_enclr	// br if request to clear/enable counters

        beq	r16, perfmon_dis	// br if requested to disable (r16=0)
        br	r31, perfmon_unknown	// br if unknown request

//
// rdusp - PALcode for rdusp instruction
//
// Entry:
//	Vectored into via hardware PALcode instruction dispatch.
//
// Function:
//	v0 (r0) <- usp
//

        CALL_PAL_PRIV(PAL_RDUSP_ENTRY)
Call_Pal_Rdusp:
        nop
        mfpr	r0, pt_usp
        hw_rei


        CALL_PAL_PRIV(0x003B)
CallPal_OpcDec3B:
        br	r31, osfpal_calpal_opcdec

//
// whami - PALcode for whami instruction
//
// Entry:
//	Vectored into via hardware PALcode instruction dispatch.
//
// Function:
//	v0 (r0) <- whami
//
        CALL_PAL_PRIV(PAL_WHAMI_ENTRY)
Call_Pal_Whami:
        nop
        mfpr    r0, pt_whami            // Get Whami
        extbl	r0, 1, r0		// Isolate just whami bits
        hw_rei

//
// retsys - PALcode for retsys instruction
//
// Entry:
//	Vectored into via hardware PALcode instruction dispatch.
//       00(sp) contains return pc
//       08(sp) contains r29
//
// Function:
//	Return from system call.
//       mode switched from kern to user.
//       stacks swapped, ugp, upc restored.
//       r23, r25 junked
//

        CALL_PAL_PRIV(PAL_RETSYS_ENTRY)
Call_Pal_Retsys:
        lda	r25, osfsf_c_size(sp) 	// pop stack
        bis	r25, r31, r14		// touch r25 & r14 to stall mf exc_addr

        mfpr	r14, exc_addr		// save exc_addr in case of fault
        ldq	r23, osfsf_pc(sp) 	// get pc

        ldq	r29, osfsf_gp(sp) 	// get gp
        stl_c	r31, -4(sp)		// clear lock_flag

        lda	r11, 1<<osfps_v_mode(r31)// new PS:mode=user
        mfpr	r30, pt_usp		// get users stack

        bic	r23, 3, r23		// clean return pc
        mtpr	r31, ev5__ipl		// zero ibox IPL - 2 bubbles to hw_rei

        mtpr	r11, ev5__dtb_cm	// set Mbox current mode - no virt ref for 2 cycles
        mtpr	r11, ev5__ps		// set Ibox current mode - 2 bubble to hw_rei

        mtpr	r23, exc_addr		// set return address - 1 bubble to hw_rei
        mtpr	r25, pt_ksp		// save kern stack

        rc	r31			// clear inter_flag
//	pvc_violate 248			// possible hidden mt->mf pt violation ok in callpal
        hw_rei_spe			// and back


        CALL_PAL_PRIV(0x003E)
CallPal_OpcDec3E:
        br	r31, osfpal_calpal_opcdec

//
// rti - PALcode for rti instruction
//
// Entry:
//	Vectored into via hardware PALcode instruction dispatch.
//
// Function:
//	00(sp) -> ps
//	08(sp) -> pc
//	16(sp) -> r29 (gp)
//	24(sp) -> r16 (a0)
//	32(sp) -> r17 (a1)
//	40(sp) -> r18 (a3)
//

        CALL_PAL_PRIV(PAL_RTI_ENTRY)
        /* called once by platform_tlaser */
        .globl Call_Pal_Rti
Call_Pal_Rti:
        lda	r25, osfsf_c_size(sp)	// get updated sp
        bis	r25, r31, r14		// touch r14,r25 to stall mf exc_addr

        mfpr	r14, exc_addr		// save PC in case of fault
        rc	r31			// clear intr_flag

        ldq	r12, -6*8(r25)		// get ps
        ldq	r13, -5*8(r25)		// pc

        ldq	r18, -1*8(r25)		// a2
        ldq	r17, -2*8(r25)		// a1

        ldq	r16, -3*8(r25)		// a0
        ldq	r29, -4*8(r25)		// gp

        bic	r13, 3, r13		// clean return pc
        stl_c	r31, -4(r25)		// clear lock_flag

        and	r12, osfps_m_mode, r11	// get mode
        mtpr	r13, exc_addr		// set return address

        beq	r11, rti_to_kern	// br if rti to Kern
        br	r31, rti_to_user	// out of call_pal space


///////////////////////////////////////////////////
// Start the Unprivileged CALL_PAL Entry Points
///////////////////////////////////////////////////

//
// bpt - PALcode for bpt instruction
//
// Entry:
//	Vectored into via hardware PALcode instruction dispatch.
//
// Function:
//	Build stack frame
//	a0 <- code
//	a1 <- unpred
//	a2 <- unpred
//	vector via entIF
//
//
//
        .text	1
//	. = 0x3000
        CALL_PAL_UNPRIV(PAL_BPT_ENTRY)
Call_Pal_Bpt:
        sll	r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit
        mtpr	r31, ev5__ps		// Set Ibox current mode to kernel

        bis	r11, r31, r12		// Save PS for stack write
        bge	r25, CALL_PAL_bpt_10_		// no stack swap needed if cm=kern

        mtpr	r31, ev5__dtb_cm	// Set Mbox current mode to kernel -
                                        //     no virt ref for next 2 cycles
        mtpr	r30, pt_usp		// save user stack

        bis	r31, r31, r11		// Set new PS
        mfpr	r30, pt_ksp

CALL_PAL_bpt_10_:
        lda	sp, 0-osfsf_c_size(sp)// allocate stack space
        mfpr	r14, exc_addr		// get pc

        stq	r16, osfsf_a0(sp)	// save regs
        bis	r31, osf_a0_bpt, r16	// set a0

        stq	r17, osfsf_a1(sp)	// a1
        br	r31, bpt_bchk_common	// out of call_pal space


//
// bugchk - PALcode for bugchk instruction
//
// Entry:
//	Vectored into via hardware PALcode instruction dispatch.
//
// Function:
//	Build stack frame
//	a0 <- code
//	a1 <- unpred
//	a2 <- unpred
//	vector via entIF
//
//
//
        CALL_PAL_UNPRIV(PAL_BUGCHK_ENTRY)
Call_Pal_Bugchk:
        sll	r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit
        mtpr	r31, ev5__ps		// Set Ibox current mode to kernel

        bis	r11, r31, r12		// Save PS for stack write
        bge	r25, CALL_PAL_bugchk_10_		// no stack swap needed if cm=kern

        mtpr	r31, ev5__dtb_cm	// Set Mbox current mode to kernel -
                                        //     no virt ref for next 2 cycles
        mtpr	r30, pt_usp		// save user stack

        bis	r31, r31, r11		// Set new PS
        mfpr	r30, pt_ksp

CALL_PAL_bugchk_10_:
        lda	sp, 0-osfsf_c_size(sp)// allocate stack space
        mfpr	r14, exc_addr		// get pc

        stq	r16, osfsf_a0(sp)	// save regs
        bis	r31, osf_a0_bugchk, r16	// set a0

        stq	r17, osfsf_a1(sp)	// a1
        br	r31, bpt_bchk_common	// out of call_pal space


        CALL_PAL_UNPRIV(0x0082)
CallPal_OpcDec82:
        br	r31, osfpal_calpal_opcdec

//
// callsys - PALcode for callsys instruction
//
// Entry:
//	Vectored into via hardware PALcode instruction dispatch.
//
// Function:
// 	Switch mode to kernel and build a callsys stack frame.
//       sp = ksp
//       gp = kgp
//	t8 - t10 (r22-r24) trashed
//
//
//
        CALL_PAL_UNPRIV(PAL_CALLSYS_ENTRY)
Call_Pal_Callsys:

        and	r11, osfps_m_mode, r24	// get mode
        mfpr	r22, pt_ksp		// get ksp

        beq	r24, sys_from_kern 	// sysCall from kern is not allowed
        mfpr	r12, pt_entsys		// get address of callSys routine

//
// from here on we know we are in user going to Kern
//
        mtpr	r31, ev5__dtb_cm	// set Mbox current mode - no virt ref for 2 cycles
        mtpr	r31, ev5__ps		// set Ibox current mode - 2 bubble to hw_rei

        bis	r31, r31, r11		// PS=0 (mode=kern)
        mfpr	r23, exc_addr		// get pc

        mtpr	r30, pt_usp		// save usp
        lda	sp, 0-osfsf_c_size(r22)// set new sp

        stq	r29, osfsf_gp(sp)	// save user gp/r29
        stq	r24, osfsf_ps(sp)	// save ps

        stq	r23, osfsf_pc(sp)	// save pc
        mtpr	r12, exc_addr		// set address
                                        // 1 cycle to hw_rei

        mfpr	r29, pt_kgp		// get the kern gp/r29

        hw_rei_spe			// and off we go!


        CALL_PAL_UNPRIV(0x0084)
CallPal_OpcDec84:
        br	r31, osfpal_calpal_opcdec

        CALL_PAL_UNPRIV(0x0085)
CallPal_OpcDec85:
        br	r31, osfpal_calpal_opcdec

//
// imb - PALcode for imb instruction
//
// Entry:
//	Vectored into via hardware PALcode instruction dispatch.
//
// Function:
//       Flush the writebuffer and flush the Icache
//
//
//
        CALL_PAL_UNPRIV(PAL_IMB_ENTRY)
Call_Pal_Imb:
        mb                              // Clear the writebuffer
        mfpr    r31, ev5__mcsr          // Sync with clear
        nop
        nop
        br      r31, pal_ic_flush           // Flush Icache


// CALL_PAL OPCDECs

        CALL_PAL_UNPRIV(0x0087)
CallPal_OpcDec87:
        br	r31, osfpal_calpal_opcdec

        CALL_PAL_UNPRIV(0x0088)
CallPal_OpcDec88:
        br	r31, osfpal_calpal_opcdec

        CALL_PAL_UNPRIV(0x0089)
CallPal_OpcDec89:
        br	r31, osfpal_calpal_opcdec

        CALL_PAL_UNPRIV(0x008A)
CallPal_OpcDec8A:
        br	r31, osfpal_calpal_opcdec

        CALL_PAL_UNPRIV(0x008B)
CallPal_OpcDec8B:
        br	r31, osfpal_calpal_opcdec

        CALL_PAL_UNPRIV(0x008C)
CallPal_OpcDec8C:
        br	r31, osfpal_calpal_opcdec

        CALL_PAL_UNPRIV(0x008D)
CallPal_OpcDec8D:
        br	r31, osfpal_calpal_opcdec

        CALL_PAL_UNPRIV(0x008E)
CallPal_OpcDec8E:
        br	r31, osfpal_calpal_opcdec

        CALL_PAL_UNPRIV(0x008F)
CallPal_OpcDec8F:
        br	r31, osfpal_calpal_opcdec

        CALL_PAL_UNPRIV(0x0090)
CallPal_OpcDec90:
        br	r31, osfpal_calpal_opcdec

        CALL_PAL_UNPRIV(0x0091)
CallPal_OpcDec91:
        br	r31, osfpal_calpal_opcdec

        CALL_PAL_UNPRIV(0x0092)
CallPal_OpcDec92:
        br	r31, osfpal_calpal_opcdec

        CALL_PAL_UNPRIV(0x0093)
CallPal_OpcDec93:
        br	r31, osfpal_calpal_opcdec

        CALL_PAL_UNPRIV(0x0094)
CallPal_OpcDec94:
        br	r31, osfpal_calpal_opcdec

        CALL_PAL_UNPRIV(0x0095)
CallPal_OpcDec95:
        br	r31, osfpal_calpal_opcdec

        CALL_PAL_UNPRIV(0x0096)
CallPal_OpcDec96:
        br	r31, osfpal_calpal_opcdec

        CALL_PAL_UNPRIV(0x0097)
CallPal_OpcDec97:
        br	r31, osfpal_calpal_opcdec

        CALL_PAL_UNPRIV(0x0098)
CallPal_OpcDec98:
        br	r31, osfpal_calpal_opcdec

        CALL_PAL_UNPRIV(0x0099)
CallPal_OpcDec99:
        br	r31, osfpal_calpal_opcdec

        CALL_PAL_UNPRIV(0x009A)
CallPal_OpcDec9A:
        br	r31, osfpal_calpal_opcdec

        CALL_PAL_UNPRIV(0x009B)
CallPal_OpcDec9B:
        br	r31, osfpal_calpal_opcdec

        CALL_PAL_UNPRIV(0x009C)
CallPal_OpcDec9C:
        br	r31, osfpal_calpal_opcdec

        CALL_PAL_UNPRIV(0x009D)
CallPal_OpcDec9D:
        br	r31, osfpal_calpal_opcdec

//
// rdunique - PALcode for rdunique instruction
//
// Entry:
//	Vectored into via hardware PALcode instruction dispatch.
//
// Function:
//	v0 (r0) <- unique
//
//
//
        CALL_PAL_UNPRIV(PAL_RDUNIQUE_ENTRY)
CALL_PALrdunique_:
        mfpr	r0, pt_pcbb		// get pcb pointer
        ldq_p	r0, osfpcb_q_unique(r0) // get new value

        hw_rei

//
// wrunique - PALcode for wrunique instruction
//
// Entry:
//	Vectored into via hardware PALcode instruction dispatch.
//
// Function:
//	unique <- a0 (r16)
//
//
//
CALL_PAL_UNPRIV(PAL_WRUNIQUE_ENTRY)
CALL_PAL_Wrunique:
        nop
        mfpr	r12, pt_pcbb		// get pcb pointer
        stq_p	r16, osfpcb_q_unique(r12)// get new value
        nop				// Pad palshadow write
        hw_rei				// back

// CALL_PAL OPCDECs

        CALL_PAL_UNPRIV(0x00A0)
CallPal_OpcDecA0:
        br	r31, osfpal_calpal_opcdec

        CALL_PAL_UNPRIV(0x00A1)
CallPal_OpcDecA1:
        br	r31, osfpal_calpal_opcdec

        CALL_PAL_UNPRIV(0x00A2)
CallPal_OpcDecA2:
        br	r31, osfpal_calpal_opcdec

        CALL_PAL_UNPRIV(0x00A3)
CallPal_OpcDecA3:
        br	r31, osfpal_calpal_opcdec

        CALL_PAL_UNPRIV(0x00A4)
CallPal_OpcDecA4:
        br	r31, osfpal_calpal_opcdec

        CALL_PAL_UNPRIV(0x00A5)
CallPal_OpcDecA5:
        br	r31, osfpal_calpal_opcdec

        CALL_PAL_UNPRIV(0x00A6)
CallPal_OpcDecA6:
        br	r31, osfpal_calpal_opcdec

        CALL_PAL_UNPRIV(0x00A7)
CallPal_OpcDecA7:
        br	r31, osfpal_calpal_opcdec

        CALL_PAL_UNPRIV(0x00A8)
CallPal_OpcDecA8:
        br	r31, osfpal_calpal_opcdec

        CALL_PAL_UNPRIV(0x00A9)
CallPal_OpcDecA9:
        br	r31, osfpal_calpal_opcdec


//
// gentrap - PALcode for gentrap instruction
//
// CALL_PAL_gentrap:
// Entry:
//	Vectored into via hardware PALcode instruction dispatch.
//
// Function:
//	Build stack frame
//	a0 <- code
//	a1 <- unpred
//	a2 <- unpred
//	vector via entIF
//
//

        CALL_PAL_UNPRIV(0x00AA)
// unsupported in Hudson code .. pboyle Nov/95
CALL_PAL_gentrap:
        sll	r11, 63-osfps_v_mode, r25 // Shift mode up to MS bit
        mtpr	r31, ev5__ps		// Set Ibox current mode to kernel

        bis	r11, r31, r12			// Save PS for stack write
        bge	r25, CALL_PAL_gentrap_10_	// no stack swap needed if cm=kern

        mtpr	r31, ev5__dtb_cm	// Set Mbox current mode to kernel -
                                        //     no virt ref for next 2 cycles
        mtpr	r30, pt_usp		// save user stack

        bis	r31, r31, r11		// Set new PS
        mfpr	r30, pt_ksp

CALL_PAL_gentrap_10_:
        lda	sp, 0-osfsf_c_size(sp)// allocate stack space
        mfpr	r14, exc_addr		// get pc

        stq	r16, osfsf_a0(sp)	// save regs
        bis	r31, osf_a0_gentrap, r16// set a0

        stq	r17, osfsf_a1(sp)	// a1
        br	r31, bpt_bchk_common	// out of call_pal space


// CALL_PAL OPCDECs

        CALL_PAL_UNPRIV(0x00AB)
CallPal_OpcDecAB:
        br	r31, osfpal_calpal_opcdec

        CALL_PAL_UNPRIV(0x00AC)
CallPal_OpcDecAC:
        br	r31, osfpal_calpal_opcdec

        CALL_PAL_UNPRIV(0x00AD)
CallPal_OpcDecAD:
        br	r31, osfpal_calpal_opcdec

        CALL_PAL_UNPRIV(0x00AE)
CallPal_OpcDecAE:
        br	r31, osfpal_calpal_opcdec

        CALL_PAL_UNPRIV(0x00AF)
CallPal_OpcDecAF:
        br	r31, osfpal_calpal_opcdec

        CALL_PAL_UNPRIV(0x00B0)
CallPal_OpcDecB0:
        br	r31, osfpal_calpal_opcdec

        CALL_PAL_UNPRIV(0x00B1)
CallPal_OpcDecB1:
        br	r31, osfpal_calpal_opcdec

        CALL_PAL_UNPRIV(0x00B2)
CallPal_OpcDecB2:
        br	r31, osfpal_calpal_opcdec

        CALL_PAL_UNPRIV(0x00B3)
CallPal_OpcDecB3:
        br	r31, osfpal_calpal_opcdec

        CALL_PAL_UNPRIV(0x00B4)
CallPal_OpcDecB4:
        br	r31, osfpal_calpal_opcdec

        CALL_PAL_UNPRIV(0x00B5)
CallPal_OpcDecB5:
        br	r31, osfpal_calpal_opcdec

        CALL_PAL_UNPRIV(0x00B6)
CallPal_OpcDecB6:
        br	r31, osfpal_calpal_opcdec

        CALL_PAL_UNPRIV(0x00B7)
CallPal_OpcDecB7:
        br	r31, osfpal_calpal_opcdec

        CALL_PAL_UNPRIV(0x00B8)
CallPal_OpcDecB8:
        br	r31, osfpal_calpal_opcdec

        CALL_PAL_UNPRIV(0x00B9)
CallPal_OpcDecB9:
        br	r31, osfpal_calpal_opcdec

        CALL_PAL_UNPRIV(0x00BA)
CallPal_OpcDecBA:
        br	r31, osfpal_calpal_opcdec

        CALL_PAL_UNPRIV(0x00BB)
CallPal_OpcDecBB:
        br	r31, osfpal_calpal_opcdec

        CALL_PAL_UNPRIV(0x00BC)
CallPal_OpcDecBC:
        br	r31, osfpal_calpal_opcdec

        CALL_PAL_UNPRIV(0x00BD)
CallPal_OpcDecBD:
        br	r31, osfpal_calpal_opcdec

        CALL_PAL_UNPRIV(0x00BE)
CallPal_OpcDecBE:
        br	r31, osfpal_calpal_opcdec

        CALL_PAL_UNPRIV(0x00BF)
CallPal_OpcDecBF:
        // MODIFIED BY EGH 2/25/04
        br	r31, copypal_impl


/*======================================================================*/
/*                   OSF/1 CALL_PAL CONTINUATION AREA                   */
/*======================================================================*/

        .text	2

        . = 0x4000


// Continuation of MTPR_PERFMON
        ALIGN_BLOCK
          // "real" performance monitoring code
// mux ctl
perfmon_muxctl:
        lda     r8, 1(r31) 			// get a 1
        sll     r8, pmctr_v_sel0, r8		// move to sel0 position
        or      r8, ((0xf<<pmctr_v_sel1) | (0xf<<pmctr_v_sel2)), r8	// build mux select mask
        and	r17, r8, r25			// isolate pmctr mux select bits
        mfpr	r0, ev5__pmctr
        bic	r0, r8, r0			// clear old mux select bits
        or	r0,r25, r25			// or in new mux select bits
        mtpr	r25, ev5__pmctr

        // ok, now tackle cbox mux selects
        ldah    r14, 0xfff0(r31)
        zap     r14, 0xE0, r14                 // Get Cbox IPR base
//orig	get_bc_ctl_shadow	r16		// bc_ctl returned in lower longword
// adapted from ev5_pal_macros.mar
        mfpr	r16, pt_impure
        lda	r16, CNS_Q_IPR(r16)
        RESTORE_SHADOW(r16,CNS_Q_BC_CTL,r16);

        lda	r8, 0x3F(r31)			// build mux select mask
        sll	r8, bc_ctl_v_pm_mux_sel, r8

        and	r17, r8, r25			// isolate bc_ctl mux select bits
        bic	r16, r8, r16			// isolate old mux select bits
        or	r16, r25, r25			// create new bc_ctl
        mb					// clear out cbox for future ipr write
        stq_p	r25, ev5__bc_ctl(r14)		// store to cbox ipr
        mb					// clear out cbox for future ipr write

//orig	update_bc_ctl_shadow	r25, r16	// r25=value, r16-overwritten with adjusted impure ptr
// adapted from ev5_pal_macros.mar
        mfpr	r16, pt_impure
        lda	r16, CNS_Q_IPR(r16)
        SAVE_SHADOW(r25,CNS_Q_BC_CTL,r16);

        br 	r31, perfmon_success


// requested to disable perf monitoring
perfmon_dis:
        mfpr	r14, ev5__pmctr		// read ibox pmctr ipr
perfmon_dis_ctr0:			// and begin with ctr0
        blbc	r17, perfmon_dis_ctr1	// do not disable ctr0
        lda 	r8, 3(r31)
        sll	r8, pmctr_v_ctl0, r8
        bic	r14, r8, r14		// disable ctr0
perfmon_dis_ctr1:
        srl	r17, 1, r17
        blbc	r17, perfmon_dis_ctr2	// do not disable ctr1
        lda 	r8, 3(r31)
        sll	r8, pmctr_v_ctl1, r8
        bic	r14, r8, r14		// disable ctr1
perfmon_dis_ctr2:
        srl	r17, 1, r17
        blbc	r17, perfmon_dis_update	// do not disable ctr2
        lda 	r8, 3(r31)
        sll	r8, pmctr_v_ctl2, r8
        bic	r14, r8, r14		// disable ctr2
perfmon_dis_update:
        mtpr	r14, ev5__pmctr		// update pmctr ipr
//;the following code is not needed for ev5 pass2 and later, but doesn't hurt anything to leave in
// adapted from ev5_pal_macros.mar
//orig	get_pmctr_ctl	r8, r25		// pmctr_ctl bit in r8.  adjusted impure pointer in r25
        mfpr	r25, pt_impure
        lda	r25, CNS_Q_IPR(r25)
        RESTORE_SHADOW(r8,CNS_Q_PM_CTL,r25);

        lda	r17, 0x3F(r31)		// build mask
        sll	r17, pmctr_v_ctl2, r17 // shift mask to correct position
        and 	r14, r17, r14		// isolate ctl bits
        bic	r8, r17, r8		// clear out old ctl bits
        or	r14, r8, r14		// create shadow ctl bits
//orig	store_reg1 pmctr_ctl, r14, r25, ipr=1	// update pmctr_ctl register
//adjusted impure pointer still in r25
        SAVE_SHADOW(r14,CNS_Q_PM_CTL,r25);

        br 	r31, perfmon_success


// requested to enable perf monitoring
//;the following code can be greatly simplified for pass2, but should work fine as is.


perfmon_enclr:
        lda	r9, 1(r31)		// set enclr flag
        br perfmon_en_cont

perfmon_en:
        bis	r31, r31, r9		// clear enclr flag

perfmon_en_cont:
        mfpr	r8, pt_pcbb		// get PCB base
//orig	get_pmctr_ctl r25, r25
        mfpr	r25, pt_impure
        lda	r25, CNS_Q_IPR(r25)
        RESTORE_SHADOW(r25,CNS_Q_PM_CTL,r25);

        ldq_p	r16, osfpcb_q_fen(r8)	// read DAT/PME/FEN quadword
        mfpr	r14, ev5__pmctr		// read ibox pmctr ipr
        srl 	r16, osfpcb_v_pme, r16	// get pme bit
        mfpr	r13, icsr
        and	r16,  1, r16		// isolate pme bit

        // this code only needed in pass2 and later
        lda	r12, 1<<icsr_v_pmp(r31)		// pb
        bic	r13, r12, r13		// clear pmp bit
        sll	r16, icsr_v_pmp, r12	// move pme bit to icsr<pmp> position
        or	r12, r13, r13		// new icsr with icsr<pmp> bit set/clear
        mtpr	r13, icsr		// update icsr

        bis	r31, 1, r16		// set r16<0> on pass2 to update pmctr always (icsr provides real enable)

        sll	r25, 6, r25		// shift frequency bits into pmctr_v_ctl positions
        bis	r14, r31, r13		// copy pmctr

perfmon_en_ctr0:			// and begin with ctr0
        blbc	r17, perfmon_en_ctr1	// do not enable ctr0

        blbc	r9, perfmon_en_noclr0	// enclr flag set, clear ctr0 field
        lda	r8, 0xffff(r31)
        zapnot  r8, 3, r8		// ctr0<15:0> mask
        sll	r8, pmctr_v_ctr0, r8
        bic	r14, r8, r14		// clear ctr bits
        bic	r13, r8, r13		// clear ctr bits

perfmon_en_noclr0:
//orig	get_addr r8, 3<<pmctr_v_ctl0, r31
        LDLI(r8, (3<<pmctr_v_ctl0))
        and 	r25, r8, r12		//isolate frequency select bits for ctr0
        bic	r14, r8, r14		// clear ctl0 bits in preparation for enabling
        or	r14,r12,r14		// or in new ctl0 bits

perfmon_en_ctr1:			// enable ctr1
        srl	r17, 1, r17		// get ctr1 enable
        blbc	r17, perfmon_en_ctr2	// do not enable ctr1

        blbc	r9, perfmon_en_noclr1   // if enclr flag set, clear ctr1 field
        lda	r8, 0xffff(r31)
        zapnot  r8, 3, r8		// ctr1<15:0> mask
        sll	r8, pmctr_v_ctr1, r8
        bic	r14, r8, r14		// clear ctr bits
        bic	r13, r8, r13		// clear ctr bits

perfmon_en_noclr1:
//orig	get_addr r8, 3<<pmctr_v_ctl1, r31
        LDLI(r8, (3<<pmctr_v_ctl1))
        and 	r25, r8, r12		//isolate frequency select bits for ctr1
        bic	r14, r8, r14		// clear ctl1 bits in preparation for enabling
        or	r14,r12,r14		// or in new ctl1 bits

perfmon_en_ctr2:			// enable ctr2
        srl	r17, 1, r17		// get ctr2 enable
        blbc	r17, perfmon_en_return	// do not enable ctr2 - return

        blbc	r9, perfmon_en_noclr2	// if enclr flag set, clear ctr2 field
        lda	r8, 0x3FFF(r31)		// ctr2<13:0> mask
        sll	r8, pmctr_v_ctr2, r8
        bic	r14, r8, r14		// clear ctr bits
        bic	r13, r8, r13		// clear ctr bits

perfmon_en_noclr2:
//orig	get_addr r8, 3<<pmctr_v_ctl2, r31
        LDLI(r8, (3<<pmctr_v_ctl2))
        and 	r25, r8, r12		//isolate frequency select bits for ctr2
        bic	r14, r8, r14		// clear ctl2 bits in preparation for enabling
        or	r14,r12,r14		// or in new ctl2 bits

perfmon_en_return:
        cmovlbs	r16, r14, r13		// if pme enabled, move enables into pmctr
                                        // else only do the counter clears
        mtpr	r13, ev5__pmctr		// update pmctr ipr

//;this code not needed for pass2 and later, but does not hurt to leave it in
        lda	r8, 0x3F(r31)
//orig	get_pmctr_ctl r25, r12         	// read pmctr ctl; r12=adjusted impure pointer
        mfpr	r12, pt_impure
        lda	r12, CNS_Q_IPR(r12)
        RESTORE_SHADOW(r25,CNS_Q_PM_CTL,r12);

        sll	r8, pmctr_v_ctl2, r8	// build ctl mask
        and	r8, r14, r14		// isolate new ctl bits
        bic	r25, r8, r25		// clear out old ctl value
        or	r25, r14, r14		// create new pmctr_ctl
//orig	store_reg1 pmctr_ctl, r14, r12, ipr=1
        SAVE_SHADOW(r14,CNS_Q_PM_CTL,r12); // r12 still has the adjusted impure ptr

        br 	r31, perfmon_success


// options...
perfmon_ctl:

// set mode
//orig	get_pmctr_ctl r14, r12         	// read shadow pmctr ctl; r12=adjusted impure pointer
        mfpr	r12, pt_impure
        lda	r12, CNS_Q_IPR(r12)
        RESTORE_SHADOW(r14,CNS_Q_PM_CTL,r12);

        // build mode mask for pmctr register
        LDLI(r8, ((1<<pmctr_v_killu) | (1<<pmctr_v_killp) | (1<<pmctr_v_killk)))
        mfpr	r0, ev5__pmctr
        and	r17, r8, r25			// isolate pmctr mode bits
        bic	r0, r8, r0			// clear old mode bits
        or	r0, r25, r25			// or in new mode bits
        mtpr	r25, ev5__pmctr

        // the following code will only be used in pass2, but should
        // not hurt anything if run in pass1.
        mfpr	r8, icsr
        lda	r25, 1<<icsr_v_pma(r31)		// set icsr<pma> if r17<0>=0
        bic 	r8, r25, r8			// clear old pma bit
        cmovlbs r17, r31, r25			// and clear icsr<pma> if r17<0>=1
        or	r8, r25, r8
        mtpr	r8, icsr		// 4 bubbles to hw_rei
        mfpr	r31, pt0			// pad icsr write
        mfpr	r31, pt0			// pad icsr write

        // the following code not needed for pass2 and later, but
        // should work anyway.
        bis     r14, 1, r14       		// set for select processes
        blbs	r17, perfmon_sp			// branch if select processes
        bic	r14, 1, r14			// all processes
perfmon_sp:
//orig	store_reg1 pmctr_ctl, r14, r12, ipr=1   // update pmctr_ctl register
        SAVE_SHADOW(r14,CNS_Q_PM_CTL,r12); // r12 still has the adjusted impure ptr
        br 	r31, perfmon_success

// counter frequency select
perfmon_freq:
//orig	get_pmctr_ctl r14, r12         	// read shadow pmctr ctl; r12=adjusted impure pointer
        mfpr	r12, pt_impure
        lda	r12, CNS_Q_IPR(r12)
        RESTORE_SHADOW(r14,CNS_Q_PM_CTL,r12);

        lda	r8, 0x3F(r31)
//orig	sll	r8, pmctr_ctl_v_frq2, r8		// build mask for frequency select field
// I guess this should be a shift of 4 bits from the above control register structure
#define	pmctr_ctl_v_frq2_SHIFT 4
        sll	r8, pmctr_ctl_v_frq2_SHIFT, r8		// build mask for frequency select field

        and 	r8, r17, r17
        bic 	r14, r8, r14				// clear out old frequency select bits

        or 	r17, r14, r14				// or in new frequency select info
//orig	store_reg1 pmctr_ctl, r14, r12, ipr=1   // update pmctr_ctl register
        SAVE_SHADOW(r14,CNS_Q_PM_CTL,r12); // r12 still has the adjusted impure ptr

        br 	r31, perfmon_success

// read counters
perfmon_rd:
        mfpr	r0, ev5__pmctr
        or	r0, 1, r0	// or in return status
        hw_rei			// back to user

// write counters
perfmon_wr:
        mfpr	r14, ev5__pmctr
        lda	r8, 0x3FFF(r31)		// ctr2<13:0> mask
        sll	r8, pmctr_v_ctr2, r8

        LDLI(r9, (0xFFFFFFFF))		// ctr2<15:0>,ctr1<15:0> mask
        sll	r9, pmctr_v_ctr1, r9
        or	r8, r9, r8		// or ctr2, ctr1, ctr0 mask
        bic	r14, r8, r14		// clear ctr fields
        and	r17, r8, r25		// clear all but ctr  fields
        or	r25, r14, r14		// write ctr fields
        mtpr	r14, ev5__pmctr		// update pmctr ipr

        mfpr	r31, pt0		// pad pmctr write (needed only to keep PVC happy)

perfmon_success:
        or      r31, 1, r0                     // set success
        hw_rei					// back to user

perfmon_unknown:
        or	r31, r31, r0		// set fail
        hw_rei				// back to user


//////////////////////////////////////////////////////////
// Copy code
//////////////////////////////////////////////////////////

copypal_impl:
        mov r16, r0
#ifdef CACHE_COPY
#ifndef CACHE_COPY_UNALIGNED
        and r16, 63, r8
        and r17, 63, r9
        bis r8, r9, r8
        bne r8, cache_copy_done
#endif
        bic r18, 63, r8
        and r18, 63, r18
        beq r8, cache_copy_done
cache_loop:
        ldf f17, 0(r16)
        stf f17, 0(r16)
        addq r17, 64, r17
        addq r16, 64, r16
        subq r8, 64, r8
        bne r8, cache_loop
cache_copy_done:
#endif
        ble r18, finished	// if len <=0 we are finished
        ldq_u r8, 0(r17)
        xor r17, r16, r9
        and r9, 7, r9
        and r16, 7, r10
        bne r9, unaligned
        beq r10, aligned
        ldq_u r9, 0(r16)
        addq r18, r10, r18
        mskqh r8, r17, r8
        mskql r9, r17, r9
        bis r8, r9, r8
aligned:
        subq r18, 1, r10
        bic r10, 7, r10
        and r18, 7, r18
        beq r10, aligned_done
loop:
        stq_u r8, 0(r16)
        ldq_u r8, 8(r17)
        subq r10, 8, r10
        lda r16,8(r16)
        lda r17,8(r17)
        bne r10, loop
aligned_done:
        bne r18, few_left
        stq_u r8, 0(r16)
        br r31, finished
        few_left:
        mskql r8, r18, r10
        ldq_u r9, 0(r16)
        mskqh r9, r18, r9
        bis r10, r9, r10
        stq_u r10, 0(r16)
        br r31, finished
unaligned:
        addq r17, r18, r25
        cmpule r18, 8, r9
        bne r9, unaligned_few_left
        beq r10, unaligned_dest_aligned
        and r16, 7, r10
        subq r31, r10, r10
        addq r10, 8, r10
        ldq_u r9, 7(r17)
        extql r8, r17, r8
        extqh r9, r17, r9
        bis r8, r9, r12
        insql r12, r16, r12
        ldq_u r13, 0(r16)
        mskql r13, r16, r13
        bis r12, r13, r12
        stq_u r12, 0(r16)
        addq r16, r10, r16
        addq r17, r10, r17
        subq r18, r10, r18
        ldq_u r8, 0(r17)
unaligned_dest_aligned:
        subq r18, 1, r10
        bic r10, 7, r10
        and r18, 7, r18
        beq r10, unaligned_partial_left
unaligned_loop:
        ldq_u r9, 7(r17)
        lda r17, 8(r17)
        extql r8, r17, r12
        extqh r9, r17, r13
        subq r10, 8, r10
        bis r12, r13, r13
        stq r13, 0(r16)
        lda r16, 8(r16)
        beq r10, unaligned_second_partial_left
        ldq_u r8, 7(r17)
        lda r17, 8(r17)
        extql r9, r17, r12
        extqh r8, r17, r13
        bis r12, r13, r13
        subq r10, 8, r10
        stq r13, 0(r16)
        lda r16, 8(r16)
        bne r10, unaligned_loop
unaligned_partial_left:
        mov r8, r9
unaligned_second_partial_left:
        ldq_u r8, -1(r25)
        extql r9, r17, r9
        extqh r8, r17, r8
        bis r8, r9, r8
        bne r18, few_left
        stq_u r8, 0(r16)
        br r31, finished
unaligned_few_left:
        ldq_u r9, -1(r25)
        extql r8, r17, r8
        extqh r9, r17, r9
        bis r8, r9, r8
        insqh r8, r16, r9
        insql r8, r16, r8
        lda r12, -1(r31)
        mskql r12, r18, r13
        cmovne r13, r13, r12
        insqh r12, r16, r13
        insql r12, r16, r12
        addq r16, r18, r10
        ldq_u r14, 0(r16)
        ldq_u r25, -1(r10)
        bic r14, r12, r14
        bic r25, r13, r25
        and r8, r12, r8
        and r9, r13, r9
        bis r8, r14, r8
        bis r9, r25, r9
        stq_u r9, -1(r10)
        stq_u r8, 0(r16)
finished:
        hw_rei