sanchayanmaity/gem5
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
gem5/configs/common/Options.py

287 lines
15 KiB
Python
Raw Normal View History

config: Add a mem-type config option to se/fs scripts This patch enables selection of the memory controller class through a mem-type command-line option. Behind the scenes, this option is treated much like the cpu-type, and a similar framework is used to resolve the valid options, and translate the short-hand description to a valid class. The regression scripts are updated with a hardcoded memory class for the moment. The best solution going forward is probably to get the memory out of the makeSystem functions, but Ruby complicates things as it does not connect the memory controller to the membus. --HG-- rename : configs/common/CpuConfig.py => configs/common/MemConfig.py
2013-04-22 19:20:33 +02:00
# Copyright (c) 2013 ARM Limited
# All rights reserved.
#
# The license below extends only to copyright in the software and shall
# not be construed as granting a license to any other intellectual
# property including but not limited to intellectual property relating
# to a hardware implementation of the functionality of the software
# licensed hereunder. You may use the software subject to the license
# terms below provided that you ensure that this notice is replicated
# unmodified and in its entirety in all distributions of the software,
# modified or unmodified, in source code or in binary form.
#
add instruction count fast forwaing and max instruction options --HG-- extra : convert_revision : 8fe45e512229cdc3e0dcd23e3e5c54516c445d0f
2008-02-22 23:48:10 +01:00
# Copyright (c) 2006-2008 The Regents of The University of Michigan
factor out common run code from se.py and fs.py. configs/example/fs.py: factor out common code. configs/example/se.py: factor out common code --HG-- extra : convert_revision : 72a1f653c84eae1b7d281e0a5e60ee116ad6b27d
2006-10-27 22:32:26 +02:00
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are
# met: redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer;
# redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution;
# neither the name of the copyright holders nor the names of its
# contributors may be used to endorse or promote products derived from
# this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
# Authors: Lisa Hsu
Config: Change the way options are added I am not too happy with the way options are added in files se.py and fs.py currently. This patch moves all the options to the file Options.py, functions from which are called when required.
2012-03-28 18:01:53 +02:00
import m5
from m5.defines import buildEnv
from m5.objects import *
from Benchmarks import *
ruby: Ruby support for sparse memory The patch includes direct support for the MI example protocol.
2010-03-22 05:22:21 +01:00
config: Cleanup CPU configuration The CPUs supported by the configuration scripts used to be hard-coded. This was not ideal for several reasons. For example, the configuration scripts depend on all CPU models even though only a subset might have been compiled. This changeset adds a new module to the configuration scripts that automatically discovers the available CPU models from the compiled SimObjects. As a nice bonus, the use of introspection allows us to automatically generate a list of available CPU models suitable for printing. This list is augmented with the Python doc string from the underlying class if available.
2013-02-15 23:40:08 +01:00
import CpuConfig
config: Add a mem-type config option to se/fs scripts This patch enables selection of the memory controller class through a mem-type command-line option. Behind the scenes, this option is treated much like the cpu-type, and a similar framework is used to resolve the valid options, and translate the short-hand description to a valid class. The regression scripts are updated with a hardcoded memory class for the moment. The best solution going forward is probably to get the memory out of the makeSystem functions, but Ruby complicates things as it does not connect the memory controller to the membus. --HG-- rename : configs/common/CpuConfig.py => configs/common/MemConfig.py
2013-04-22 19:20:33 +02:00
import MemConfig
config: Cleanup CPU configuration The CPUs supported by the configuration scripts used to be hard-coded. This was not ideal for several reasons. For example, the configuration scripts depend on all CPU models even though only a subset might have been compiled. This changeset adds a new module to the configuration scripts that automatically discovers the available CPU models from the compiled SimObjects. As a nice bonus, the use of introspection allows us to automatically generate a list of available CPU models suitable for printing. This list is augmented with the Python doc string from the underlying class if available.
2013-02-15 23:40:08 +01:00
def _listCpuTypes(option, opt, value, parser):
CpuConfig.print_cpu_list()
sys.exit(0)
config: Add a mem-type config option to se/fs scripts This patch enables selection of the memory controller class through a mem-type command-line option. Behind the scenes, this option is treated much like the cpu-type, and a similar framework is used to resolve the valid options, and translate the short-hand description to a valid class. The regression scripts are updated with a hardcoded memory class for the moment. The best solution going forward is probably to get the memory out of the makeSystem functions, but Ruby complicates things as it does not connect the memory controller to the membus. --HG-- rename : configs/common/CpuConfig.py => configs/common/MemConfig.py
2013-04-22 19:20:33 +02:00
def _listMemTypes(option, opt, value, parser):
MemConfig.print_mem_list()
sys.exit(0)
Config: Change the way options are added I am not too happy with the way options are added in files se.py and fs.py currently. This patch moves all the options to the file Options.py, functions from which are called when required.
2012-03-28 18:01:53 +02:00
def addCommonOptions(parser):
# system options
config: Cleanup CPU configuration The CPUs supported by the configuration scripts used to be hard-coded. This was not ideal for several reasons. For example, the configuration scripts depend on all CPU models even though only a subset might have been compiled. This changeset adds a new module to the configuration scripts that automatically discovers the available CPU models from the compiled SimObjects. As a nice bonus, the use of introspection allows us to automatically generate a list of available CPU models suitable for printing. This list is augmented with the Python doc string from the underlying class if available.
2013-02-15 23:40:08 +01:00
parser.add_option("--list-cpu-types",
action="callback", callback=_listCpuTypes,
help="List available CPU types")
Config: Change the way options are added I am not too happy with the way options are added in files se.py and fs.py currently. This patch moves all the options to the file Options.py, functions from which are called when required.
2012-03-28 18:01:53 +02:00
parser.add_option("--cpu-type", type="choice", default="atomic",
config: Cleanup CPU configuration The CPUs supported by the configuration scripts used to be hard-coded. This was not ideal for several reasons. For example, the configuration scripts depend on all CPU models even though only a subset might have been compiled. This changeset adds a new module to the configuration scripts that automatically discovers the available CPU models from the compiled SimObjects. As a nice bonus, the use of introspection allows us to automatically generate a list of available CPU models suitable for printing. This list is augmented with the Python doc string from the underlying class if available.
2013-02-15 23:40:08 +01:00
choices=CpuConfig.cpu_names(),
Config: Change the way options are added I am not too happy with the way options are added in files se.py and fs.py currently. This patch moves all the options to the file Options.py, functions from which are called when required.
2012-03-28 18:01:53 +02:00
help = "type of cpu to run with")
parser.add_option("--checker", action="store_true");
parser.add_option("-n", "--num-cpus", type="int", default=1)
power: Add voltage domains to the clock domains This patch adds the notion of voltage domains, and groups clock domains that operate under the same voltage (i.e. power supply) into domains. Each clock domain is required to be associated with a voltage domain, and the latter requires the voltage to be explicitly set. A voltage domain is an independently controllable voltage supply being provided to section of the design. Thus, if you wish to perform dynamic voltage scaling on a CPU, its clock domain should be associated with a separate voltage domain. The current implementation of the voltage domain does not take into consideration cases where there are derived voltage domains running at ratio of native voltage domains, as with the case where there can be on-chip buck/boost (charge pumps) voltage regulation logic. The regression and configuration scripts are updated with a generic voltage domain for the system, and one for the CPUs.
2013-08-19 09:52:28 +02:00
parser.add_option("--sys-voltage", action="store", type="string",
default='1.0V',
help = """Top-level voltage for blocks running at system
power supply""")
config: Add a system clock command-line option This patch adds a 'sys_clock' command-line option and use it to assign clocks to the system during instantiation. As part of this change, the default clock in the System class is removed and whenever a system is instantiated a system clock value must be set. A default value is provided for the command-line option. The configs and tests are updated accordingly.
2013-06-27 11:49:49 +02:00
parser.add_option("--sys-clock", action="store", type="string",
default='1GHz',
help = """Top-level clock for blocks running at system
speed""")
config: Add a CPU clock command-line option This patch adds a 'cpu_clock' command-line option and uses the value to assign clocks to components running at the CPU speed (L1 and L2 including the L2-bus). The configuration scripts are updated accordingly. The 'clock' option is left unchanged in this patch as it is still used by a number of components. In follow-on patches the latter will be disambiguated further.
2013-06-27 11:49:49 +02:00
parser.add_option("--cpu-clock", action="store", type="string",
default='2GHz',
help="Clock for blocks running at CPU speed")
configs: rearrange the available options in Options.py It also changes the instantiation of physmem in se.py so as to make use of the memory size supplied by the mem_size option.
2013-06-29 04:42:26 +02:00
parser.add_option("--smt", action="store_true", default=False,
help = """
Only used if multiple programs are specified. If true,
then the number of threads per cpu is same as the
number of programs.""")
# Memory Options
parser.add_option("--list-mem-types",
action="callback", callback=_listMemTypes,
help="List available memory types")
mem: Change memory defaults to be more representative Make the default memory type DDR3-1600 x64, and use the open-adaptive page policy. This change is aiming to ensure that users by default are using a realistic memory system.
2014-03-23 16:12:10 +01:00
parser.add_option("--mem-type", type="choice", default="ddr3_1600_x64",
configs: rearrange the available options in Options.py It also changes the instantiation of physmem in se.py so as to make use of the memory size supplied by the mem_size option.
2013-06-29 04:42:26 +02:00
choices=MemConfig.mem_names(),
help = "type of memory to use")
config: Command line support for multi-channel memory This patch adds support for specifying multi-channel memory configurations on the command line, e.g. 'se/fs.py --mem-type=ddr3_1600_x64 --mem-channels=4'. To enable this, it enhances the functionality of MemConfig and moves the existing makeMultiChannel class method from SimpleDRAM to the support scripts. The se/fs.py example scripts are updated to make use of the new feature.
2013-08-19 09:52:34 +02:00
parser.add_option("--mem-channels", type="int", default=1,
help = "number of memory channels")
config: Expose the DRAM ranks as a command-line option This patch gives the user direct influence over the number of DRAM ranks to make it easier to tune the memory density without affecting the bandwidth (previously the only means of scaling the device count was through the number of channels). The patch also adds some basic sanity checks to ensure that the number of ranks is a power of two (since we rely on bit slices in the address decoding).
2014-12-23 15:31:18 +01:00
parser.add_option("--mem-ranks", type="int", default=None,
help = "number of memory ranks per channel")
configs: rearrange the available options in Options.py It also changes the instantiation of physmem in se.py so as to make use of the memory size supplied by the mem_size option.
2013-06-29 04:42:26 +02:00
parser.add_option("--mem-size", action="store", type="string",
default="512MB",
help="Specify the physical memory size (single memory)")
arm: Add support for ARMv8 (AArch64 & AArch32) Note: AArch64 and AArch32 interworking is not supported. If you use an AArch64 kernel you are restricted to AArch64 user-mode binaries. This will be addressed in a later patch. Note: Virtualization is only supported in AArch32 mode. This will also be fixed in a later patch. Contributors: Giacomo Gabrielli (TrustZone, LPAE, system-level AArch64, AArch64 NEON, validation) Thomas Grocutt (AArch32 Virtualization, AArch64 FP, validation) Mbou Eyole (AArch64 NEON, validation) Ali Saidi (AArch64 Linux support, code integration, validation) Edmund Grimley-Evans (AArch64 FP) William Wang (AArch64 Linux support) Rene De Jong (AArch64 Linux support, performance opt.) Matt Horsnell (AArch64 MP, validation) Matt Evans (device models, code integration, validation) Chris Adeniyi-Jones (AArch64 syscall-emulation) Prakash Ramrakhyani (validation) Dam Sunwoo (validation) Chander Sudanthi (validation) Stephan Diestelhorst (validation) Andreas Hansson (code integration, performance opt.) Eric Van Hensbergen (performance opt.) Gabe Black
2014-01-24 22:29:34 +01:00
parser.add_option("-l", "--lpae", action="store_true")
parser.add_option("-V", "--virtualisation", action="store_true")
config: Add --memchecker option This patch adds the --memchecker option, to denote that a MemChecker should be instantiated for the system. The exact usage of the MemChecker depends on the system configuration. For now CacheConfig.py makes use of the option, adding MemCheckerMonitor instances between CPUs and D-Caches. Note, however, that currently this only provides limited checking on a running system; other parts of the system, such as I/O devices are not monitored, and may cause warnings to be issued by the monitor.
2014-12-23 15:31:18 +01:00
parser.add_option("--memchecker", action="store_true")
configs: rearrange the available options in Options.py It also changes the instantiation of physmem in se.py so as to make use of the memory size supplied by the mem_size option.
2013-06-29 04:42:26 +02:00
# Cache Options
parser.add_option("--caches", action="store_true")
parser.add_option("--l2cache", action="store_true")
parser.add_option("--fastmem", action="store_true")
Config: Change the way options are added I am not too happy with the way options are added in files se.py and fs.py currently. This patch moves all the options to the file Options.py, functions from which are called when required.
2012-03-28 18:01:53 +02:00
parser.add_option("--num-dirs", type="int", default=1)
parser.add_option("--num-l2caches", type="int", default=1)
parser.add_option("--num-l3caches", type="int", default=1)
parser.add_option("--l1d_size", type="string", default="64kB")
parser.add_option("--l1i_size", type="string", default="32kB")
parser.add_option("--l2_size", type="string", default="2MB")
parser.add_option("--l3_size", type="string", default="16MB")
parser.add_option("--l1d_assoc", type="int", default=2)
parser.add_option("--l1i_assoc", type="int", default=2)
parser.add_option("--l2_assoc", type="int", default=8)
parser.add_option("--l3_assoc", type="int", default=16)
parser.add_option("--cacheline_size", type="int", default=64)
configs: rearrange the available options in Options.py It also changes the instantiation of physmem in se.py so as to make use of the memory size supplied by the mem_size option.
2013-06-29 04:42:26 +02:00
# Enable Ruby
Config: Change the way options are added I am not too happy with the way options are added in files se.py and fs.py currently. This patch moves all the options to the file Options.py, functions from which are called when required.
2012-03-28 18:01:53 +02:00
parser.add_option("--ruby", action="store_true")
factor out common run code from se.py and fs.py. configs/example/fs.py: factor out common code. configs/example/se.py: factor out common code --HG-- extra : convert_revision : 72a1f653c84eae1b7d281e0a5e60ee116ad6b27d
2006-10-27 22:32:26 +02:00
Config: Change the way options are added I am not too happy with the way options are added in files se.py and fs.py currently. This patch moves all the options to the file Options.py, functions from which are called when required.
2012-03-28 18:01:53 +02:00
# Run duration options
config: correct example ruby scripts A couple of recent changesets added/deleted/edited some variables that are needed for running the example ruby scripts. This changeset edits these scripts to bring them to a working state.
2013-10-10 00:28:14 +02:00
parser.add_option("-m", "--abs-max-tick", type="int", default=m5.MaxTick,
Configs: Fix up maxtick and maxtime This patch contains three fixes to max tick options handling in Options.py and Simulation.py: 1) Since the global simulator frequency isn't bound until m5.instantiate() is called, the maxtick resolution needs to happen after this call, since changes to the global frequency will cause m5.simulate() to misinterpret the maxtick value. Shuffling this also requires tweaking the checkpoint directory handling to signal the checkpoint restore tick back to run(). Fixing this completely and correctly will require storing the simulation frequency into checkpoints, which is beyond the scope of this patch. 2) The maxtick option in Options.py was defaulted to MaxTicks, so the old code would always skip over the maxtime part of the conditionals at the beginning of run(). Change the maxtick default to None, and set the maxtick local variable in run() appropriately. 3) To clarify whether max ticks settings are relative or absolute, split the maxtick option into separate options, for relative and absolute. Ensure that these two options and the maxtime option are handled appropriately to set the maxtick variable in Simulation.py.
2013-07-18 21:46:54 +02:00
metavar="TICKS", help="Run to absolute simulated tick " \
"specified including ticks from a restored checkpoint")
parser.add_option("--rel-max-tick", type="int", default=None,
metavar="TICKS", help="Simulate for specified number of" \
" ticks relative to the simulation start tick (e.g. if " \
"restoring a checkpoint)")
parser.add_option("--maxtime", type="float", default=None,
help="Run to the specified absolute simulated time in " \
"seconds")
Config: Change the way options are added I am not too happy with the way options are added in files se.py and fs.py currently. This patch moves all the options to the file Options.py, functions from which are called when required.
2012-03-28 18:01:53 +02:00
parser.add_option("-I", "--maxinsts", action="store", type="int",
default=None, help="""Total number of instructions to
simulate (default: run forever)""")
parser.add_option("--work-item-id", action="store", type="int",
help="the specific work id for exit & checkpointing")
config: add num-work-ids command line option Adds the parameter --num-work-ids to Options.py and reads the parameter into the System params in Simulation.py. This parameter enables setting the number of possible work items to different than 16. Support for this parameter already exists in src/sim/System.py, so this changeset only affects the Python config files. Committed by: Nilay Vaish <nilay@cs.wisc.edu>
2014-04-10 20:43:33 +02:00
parser.add_option("--num-work-ids", action="store", type="int",
help="Number of distinct work item types")
Config: Change the way options are added I am not too happy with the way options are added in files se.py and fs.py currently. This patch moves all the options to the file Options.py, functions from which are called when required.
2012-03-28 18:01:53 +02:00
parser.add_option("--work-begin-cpu-id-exit", action="store", type="int",
help="exit when work starts on the specified cpu")
parser.add_option("--work-end-exit-count", action="store", type="int",
help="exit at specified work end count")
parser.add_option("--work-begin-exit-count", action="store", type="int",
help="exit at specified work begin count")
parser.add_option("--init-param", action="store", type="int", default=0,
help="""Parameter available in simulation with m5
initparam""")
m5: Added option to take a checkpoint at the end of simulation
2009-11-18 22:55:58 +01:00
configs: rearrange the available options in Options.py It also changes the instantiation of physmem in se.py so as to make use of the memory size supplied by the mem_size option.
2013-06-29 04:42:26 +02:00
# Simpoint options
parser.add_option("--simpoint-profile", action="store_true",
help="Enable basic block profiling for SimPoints")
parser.add_option("--simpoint-interval", type="int", default=10000000,
help="SimPoint interval in num of instructions")
config: Add options to take/resume from SimPoint checkpoints More documentation at http://gem5.org/Simpoints Steps to profile, generate, and use SimPoints with gem5: 1. To profile workload and generate SimPoint BBV file, use the following option: --simpoint-profile --simpoint-interval <interval length> Requires single Atomic CPU and fastmem. <interval length> is in number of instructions. 2. Generate SimPoint analysis using SimPoint 3.2 from UCSD. (SimPoint 3.2 not included with this flow.) 3. To take gem5 checkpoints based on SimPoint analysis, use the following option: --take-simpoint-checkpoint=<simpoint file path>,<weight file path>,<interval length>,<warmup length> <simpoint file> and <weight file> is generated by SimPoint analysis tool from UCSD. SimPoint 3.2 format expected. <interval length> and <warmup length> are in number of instructions. 4. To resume from gem5 SimPoint checkpoints, use the following option: --restore-simpoint-checkpoint -r <N> --checkpoint-dir <simpoint checkpoint path> <N> is (SimPoint index + 1). E.g., "-r 1" will resume from SimPoint #0.
2014-12-23 15:31:17 +01:00
parser.add_option("--take-simpoint-checkpoints", action="store", type="string",
help="<simpoint file,weight file,interval-length,warmup-length>")
parser.add_option("--restore-simpoint-checkpoint", action="store_true",
help="restore from a simpoint checkpoint taken with " +
"--take-simpoint-checkpoints")
configs: rearrange the available options in Options.py It also changes the instantiation of physmem in se.py so as to make use of the memory size supplied by the mem_size option.
2013-06-29 04:42:26 +02:00
Config: Change the way options are added I am not too happy with the way options are added in files se.py and fs.py currently. This patch moves all the options to the file Options.py, functions from which are called when required.
2012-03-28 18:01:53 +02:00
# Checkpointing options
###Note that performing checkpointing via python script files will override
###checkpoint instructions built into binaries.
parser.add_option("--take-checkpoints", action="store", type="string",
config: Fix description of checkpoint option from cycle to tick This patch merely updates the description of the "take-checkpoints" option to reflect that it is specified in ticks and not in cycles.
2012-11-19 17:21:09 +01:00
help="<M,N> take checkpoints at tick M and every N ticks thereafter")
Config: Change the way options are added I am not too happy with the way options are added in files se.py and fs.py currently. This patch moves all the options to the file Options.py, functions from which are called when required.
2012-03-28 18:01:53 +02:00
parser.add_option("--max-checkpoints", action="store", type="int",
help="the maximum number of checkpoints to drop", default=5)
parser.add_option("--checkpoint-dir", action="store", type="string",
help="Place all checkpoints in this absolute directory")
parser.add_option("-r", "--checkpoint-restore", action="store", type="int",
help="restore from checkpoint <N>")
parser.add_option("--checkpoint-at-end", action="store_true",
help="take a checkpoint at end of run")
parser.add_option("--work-begin-checkpoint-count", action="store", type="int",
help="checkpoint at specified work begin count")
parser.add_option("--work-end-checkpoint-count", action="store", type="int",
help="checkpoint at specified work end count")
parser.add_option("--work-cpus-checkpoint-count", action="store", type="int",
help="checkpoint and exit when active cpu count is reached")
parser.add_option("--restore-with-cpu", action="store", type="choice",
config: Add missing CPUs to --restore-with-cpu The --restore-with-cpu option didn't use CpuConfig.cpu_names() to determine which CPU names are valid, instead it used a static list of known CPU names. This changeset makes the option parsing code use the CPU list from the CpuConfig module instead.
2013-06-03 13:40:05 +02:00
default="atomic", choices=CpuConfig.cpu_names(),
Config: Change the way options are added I am not too happy with the way options are added in files se.py and fs.py currently. This patch moves all the options to the file Options.py, functions from which are called when required.
2012-03-28 18:01:53 +02:00
help = "cpu type for restoring from a checkpoint")
factor out common run code from se.py and fs.py. configs/example/fs.py: factor out common code. configs/example/se.py: factor out common code --HG-- extra : convert_revision : 72a1f653c84eae1b7d281e0a5e60ee116ad6b27d
2006-10-27 22:32:26 +02:00
Configs: Make using Simpoints easier with some config files that support them easily --HG-- extra : convert_revision : 0f21829306eb68b332f03da410e6c341c8595bdd
2008-02-27 06:35:09 +01:00
Config: Change the way options are added I am not too happy with the way options are added in files se.py and fs.py currently. This patch moves all the options to the file Options.py, functions from which are called when required.
2012-03-28 18:01:53 +02:00
# CPU Switching - default switch model goes from a checkpoint
# to a timing simple CPU with caches to warm up, then to detailed CPU for
# data measurement
configs: add option for repeatedly switching back-and-forth between cpu types. This patch adds a --repeat-switch option that will enable repeat core switching at a user defined period (set with --switch-freq option). currently, a switch can only occur between like CPU types. inorder CPU switching is not supported. *note* this patch simply allows a config that will perform repeat switching, it does not fix drain/switchout functionality. if you run with repeat switching you will hit assertion failures and/or your workload with hang or die.
2012-08-15 16:38:07 +02:00
parser.add_option("--repeat-switch", action="store", type="int",
default=None,
help="switch back and forth between CPUs with period <N>")
parser.add_option("-s", "--standard-switch", action="store", type="int",
default=None,
help="switch from timing to Detailed CPU after warmup period of <N>")
config: Fix --prog-interval command line option
2013-02-20 14:18:22 +01:00
parser.add_option("-p", "--prog-interval", type="str",
Config: Change the way options are added I am not too happy with the way options are added in files se.py and fs.py currently. This patch moves all the options to the file Options.py, functions from which are called when required.
2012-03-28 18:01:53 +02:00
help="CPU Progress Interval")
# Fastforwarding and simpoint related materials
parser.add_option("-W", "--warmup-insts", action="store", type="int",
default=None,
help="Warmup period in total instructions (requires --standard-switch)")
parser.add_option("--bench", action="store", type="string", default=None,
help="base names for --take-checkpoint and --checkpoint-restore")
parser.add_option("-F", "--fast-forward", action="store", type="string",
default=None,
help="Number of instructions to fast forward before switching")
parser.add_option("-S", "--simpoint", action="store_true", default=False,
help="""Use workload simpoints as an instruction offset for
--checkpoint-restore or --take-checkpoint.""")
parser.add_option("--at-instruction", action="store_true", default=False,
help="""Treat value of --checkpoint-restore or --take-checkpoint as a
number of instructions.""")
arm: Add support for ARMv8 (AArch64 & AArch32) Note: AArch64 and AArch32 interworking is not supported. If you use an AArch64 kernel you are restricted to AArch64 user-mode binaries. This will be addressed in a later patch. Note: Virtualization is only supported in AArch32 mode. This will also be fixed in a later patch. Contributors: Giacomo Gabrielli (TrustZone, LPAE, system-level AArch64, AArch64 NEON, validation) Thomas Grocutt (AArch32 Virtualization, AArch64 FP, validation) Mbou Eyole (AArch64 NEON, validation) Ali Saidi (AArch64 Linux support, code integration, validation) Edmund Grimley-Evans (AArch64 FP) William Wang (AArch64 Linux support) Rene De Jong (AArch64 Linux support, performance opt.) Matt Horsnell (AArch64 MP, validation) Matt Evans (device models, code integration, validation) Chris Adeniyi-Jones (AArch64 syscall-emulation) Prakash Ramrakhyani (validation) Dam Sunwoo (validation) Chander Sudanthi (validation) Stephan Diestelhorst (validation) Andreas Hansson (code integration, performance opt.) Eric Van Hensbergen (performance opt.) Gabe Black
2014-01-24 22:29:34 +01:00
parser.add_option("--spec-input", default="ref", type="choice",
choices=["ref", "test", "train", "smred", "mdred",
"lgred"],
help="Input set size for SPEC CPU2000 benchmarks.")
parser.add_option("--arm-iset", default="arm", type="choice",
choices=["arm", "thumb", "aarch64"],
help="ARM instruction set.")
Config: Change the way options are added I am not too happy with the way options are added in files se.py and fs.py currently. This patch moves all the options to the file Options.py, functions from which are called when required.
2012-03-28 18:01:53 +02:00
def addSEOptions(parser):
# Benchmark options
parser.add_option("-c", "--cmd", default="",
help="The binary to run in syscall emulation mode.")
parser.add_option("-o", "--options", default="",
help="""The options to pass to the binary, use " "
around the entire string""")
parser.add_option("-i", "--input", default="",
help="Read stdin from a file.")
parser.add_option("--output", default="",
help="Redirect stdout to a file.")
parser.add_option("--errout", default="",
help="Redirect stderr to a file.")
def addFSOptions(parser):
# Simulation options
parser.add_option("--timesync", action="store_true",
help="Prevent simulated time from getting ahead of real time")
# System options
parser.add_option("--kernel", action="store", type="string")
parser.add_option("--script", action="store", type="string")
parser.add_option("--frame-capture", action="store_true",
help="Stores changed frame buffers from the VNC server to compressed "\
"files in the gem5 output directory")
if buildEnv['TARGET_ISA'] == "arm":
parser.add_option("--bare-metal", action="store_true",
help="Provide the raw system without the linux specific bits")
parser.add_option("--machine-type", action="store", type="choice",
arm, tests: Update config files to more recent kernels and create 64-bit regressions. This changes the default ARM system to a Versatile Express-like system that supports 2GB of memory and PCI devices and updates the default kernels/file-systems for AArch64 ARM systems (64-bit) to support up to 32GB of memory and PCI devices. Some platforms that are no longer supported have been pruned from the configuration files. In addition a set of 64-bit ARM regressions have been added to the regression system.
2014-10-30 05:18:27 +01:00
choices=ArmMachineType.map.keys(), default="VExpress_EMM")
options: add command line option for dtb file
2013-02-16 00:48:59 +01:00
parser.add_option("--dtb-filename", action="store", type="string",
help="Specifies device tree blob file to use with device-tree-"\
"enabled kernels")
util: Streamline .apc project convertsion script This Python script generates an ARM DS-5 Streamline .apc project based on gem5 run. To successfully convert, the gem5 runs needs to be run with the context-switch-based stats dump option enabled (The guest kernel also needs to be patched to allow gem5 interrogate its task information.) See help for more information.
2013-10-17 17:20:45 +02:00
parser.add_option("--enable-context-switch-stats-dump", \
action="store_true", help="Enable stats dump at context "\
"switches and dump tasks file (required for Streamline)")
Config: Change the way options are added I am not too happy with the way options are added in files se.py and fs.py currently. This patch moves all the options to the file Options.py, functions from which are called when required.
2012-03-28 18:01:53 +02:00
# Benchmark options
parser.add_option("--dual", action="store_true",
help="Simulate two systems attached with an ethernet link")
parser.add_option("-b", "--benchmark", action="store", type="string",
dest="benchmark",
help="Specify the benchmark to run. Available benchmarks: %s"\
% DefinedBenchmarks)
# Metafile options
parser.add_option("--etherdump", action="store", type="string", dest="etherdump",
help="Specify the filename to dump a pcap capture of the" \
"ethernet traffic")
Config: Add command line options for disk image and memory size Added the options to Options.py for FS mode with backward compatibility. It is good to provide an option to specify the disk image and the memory size from command line since a lot of disk images are created to support different benchmark suites as well as per user needs. Change in program also leads to change in memory requirements. These options provide the interface to provide both disk image and memory size from the command line and gives more flexibility.
2012-04-17 00:51:26 +02:00
# Disk Image Options
parser.add_option("--disk-image", action="store", type="string", default=None,
help="Path to the disk image to use.")
config: add --root-device machine parameter In case /dev/sda1 is not actually the boot partition for an image, we can override it on the command line or in a benchmark definition.
2015-01-16 21:12:03 +01:00
parser.add_option("--root-device", action="store", type="string", default=None,
help="OS device name for root partition")
config: Add two options for setting the kernel command line. Both options accept template which will, through python string formatting, have "mem", "disk", and "script" values substituted in from the mdesc. Additional values can be used on a case by case basis by passing them as keyword arguments to the fillInCmdLine function. That makes it possible to have specialized parameters for a particular ISA, for instance. The first option lets you specify the template directly, and the other lets you specify a file which has the template in it.
2014-12-05 01:42:07 +01:00
# Command line options
parser.add_option("--command-line", action="store", type="string",
default=None,
help="Template for the kernel command line.")
parser.add_option("--command-line-file", action="store",
default=None, type="string",
help="File with a template for the kernel command line")
Reference in a new issue Copy permalink