sanchayanmaity/gem5
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
gem5/tests/configs/o3-timing-mp-ruby.py

68 lines
2.7 KiB
Python
Raw Normal View History

ruby: Set up Ruby regression tests.
2009-05-11 19:38:46 +02:00
# Copyright (c) 2006-2007 The Regents of The University of Michigan
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are
# met: redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer;
# redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution;
# neither the name of the copyright holders nor the names of its
# contributors may be used to endorse or promote products derived from
# this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
# Authors: Ron Dreslinski
import m5
from m5.objects import *
python: Move more code into m5.util allow SCons to use that code. Get rid of misc.py and just stick misc things in __init__.py Move utility functions out of SCons files and into m5.util Move utility type stuff from m5/__init__.py to m5/util/__init__.py Remove buildEnv from m5 and allow access only from m5.defines Rename AddToPath to addToPath while we're moving it to m5.util Rename read_command to readCommand while we're moving it Rename compare_versions to compareVersions while we're moving it. --HG-- rename : src/python/m5/convert.py => src/python/m5/util/convert.py rename : src/python/m5/smartdict.py => src/python/m5/util/smartdict.py
2009-09-23 00:24:16 +02:00
m5.util.addToPath('../configs/common')
regress: ruby stat additions and config changes
2012-07-11 07:51:55 +02:00
m5.util.addToPath('../configs/topologies')
ruby: Set up Ruby regression tests.
2009-05-11 19:38:46 +02:00
nb_cores = 4
cpus = [ DerivO3CPU(cpu_id=i) for i in xrange(nb_cores) ]
ruby: Fix RubyMemory to work with the newer ruby.
2009-07-07 00:49:47 +02:00
import ruby_config
config: changed default ruby config file for regression
2010-01-25 18:51:16 +01:00
ruby_memory = ruby_config.generate("TwoLevel_SplitL1UnifiedL2.rb", nb_cores)
ruby: Fix RubyMemory to work with the newer ruby.
2009-07-07 00:49:47 +02:00
ruby: Set up Ruby regression tests.
2009-05-11 19:38:46 +02:00
# system simulated
mem: Move crossbar default latencies to subclasses This patch introduces a few subclasses to the CoherentXBar and NoncoherentXBar to distinguish the different uses in the system. We use the crossbar in a wide range of places: interfacing cores to the L2, as a system interconnect, connecting I/O and peripherals, etc. Needless to say, these crossbars have very different performance, and the clock frequency alone is not enough to distinguish these scenarios. Instead of trying to capture every possible case, this patch introduces dedicated subclasses for the three primary use-cases: L2XBar, SystemXBar and IOXbar. More can be added if needed, and the defaults can be overridden.
2015-03-02 10:00:47 +01:00
system = System(cpu = cpus, physmem = ruby_memory, membus = SystemXBar(),
sim: Add the notion of clock domains to all ClockedObjects This patch adds the notion of source- and derived-clock domains to the ClockedObjects. As such, all clock information is moved to the clock domain, and the ClockedObjects are grouped into domains. The clock domains are either source domains, with a specific clock period, or derived domains that have a parent domain and a divider (potentially chained). For piece of logic that runs at a derived clock (a ratio of the clock its parent is running at) the necessary derived clock domain is created from its corresponding parent clock domain. For now, the derived clock domain only supports a divider, thus ensuring a lower speed compared to its parent. Multiplier functionality implies a PLL logic that has not been modelled yet (create a separate clock instead). The clock domains should be used as a mechanism to provide a controllable clock source that affects clock for every clocked object lying beneath it. The clock of the domain can (in a future patch) be controlled by a handler responsible for dynamic frequency scaling of the respective clock domains. All the config scripts have been retro-fitted with clock domains. For the System a default SrcClockDomain is created. For CPUs that run at a different speed than the system, there is a seperate clock domain created. This domain incorporates the CPU and the associated caches. As before, Ruby runs under its own clock domain. The clock period of all domains are pre-computed, such that no virtual functions or multiplications are needed when calling clockPeriod. Instead, the clock period is pre-computed when any changes occur. For this to be possible, each clock domain tracks its children.
2013-06-27 11:49:49 +02:00
mem_mode = "timing",
clk_domain = SrcClockDomain(clock = '1GHz'))
# Create a seperate clock domain for components that should run at
# CPUs frequency
system.cpu_clk_domain = SrcClockDomain(clock = '2GHz')
ruby: Set up Ruby regression tests.
2009-05-11 19:38:46 +02:00
for cpu in cpus:
CPU: Check that the interrupt controller is created when needed This patch adds a creation-time check to the CPU to ensure that the interrupt controller is created for the cases where it is needed, i.e. if the CPU is not being switched in later and not a checker CPU. The patch also adds the "createInterruptController" call to a number of the regression scripts.
2012-03-02 15:21:48 +01:00
# create the interrupt controller
cpu.createInterruptController()
Config: Keep track of uncached and cached ports separately. This makes sure that the address ranges requested for caches and uncached ports don't conflict with each other, and that accesses which are always uncached (message signaled interrupts for instance) don't waste time passing through caches.
2011-02-04 05:23:00 +01:00
cpu.connectAllPorts(system.membus)
sim: Add the notion of clock domains to all ClockedObjects This patch adds the notion of source- and derived-clock domains to the ClockedObjects. As such, all clock information is moved to the clock domain, and the ClockedObjects are grouped into domains. The clock domains are either source domains, with a specific clock period, or derived domains that have a parent domain and a divider (potentially chained). For piece of logic that runs at a derived clock (a ratio of the clock its parent is running at) the necessary derived clock domain is created from its corresponding parent clock domain. For now, the derived clock domain only supports a divider, thus ensuring a lower speed compared to its parent. Multiplier functionality implies a PLL logic that has not been modelled yet (create a separate clock instead). The clock domains should be used as a mechanism to provide a controllable clock source that affects clock for every clocked object lying beneath it. The clock of the domain can (in a future patch) be controlled by a handler responsible for dynamic frequency scaling of the respective clock domains. All the config scripts have been retro-fitted with clock domains. For the System a default SrcClockDomain is created. For CPUs that run at a different speed than the system, there is a seperate clock domain created. This domain incorporates the CPU and the associated caches. As before, Ruby runs under its own clock domain. The clock period of all domains are pre-computed, such that no virtual functions or multiplications are needed when calling clockPeriod. Instead, the clock period is pre-computed when any changes occur. For this to be possible, each clock domain tracks its children.
2013-06-27 11:49:49 +02:00
# All cpus are associated with cpu_clk_domain
cpu.clk_domain = system.cpu_clk_domain
ruby: Set up Ruby regression tests.
2009-05-11 19:38:46 +02:00
# connect memory to membus
MEM: Introduce the master/slave port roles in the Python classes This patch classifies all ports in Python as either Master or Slave and enforces a binding of master to slave. Conceptually, a master (such as a CPU or DMA port) issues requests, and receives responses, and conversely, a slave (such as a memory or a PIO device) receives requests and sends back responses. Currently there is no differentiation between coherent and non-coherent masters and slaves. The classification as master/slave also involves splitting the dual role port of the bus into a master and slave port and updating all the system assembly scripts to use the appropriate port. Similarly, the interrupt devices have to have their int_port split into a master and slave port. The intdev and its children have minimal changes to facilitate the extra port. Note that this patch does not enforce any port typing in the C++ world, it merely ensures that the Python objects have a notion of the port roles and are connected in an appropriate manner. This check is carried when two ports are connected, e.g. bus.master = memory.port. The following patches will make use of the classifications and specialise the C++ ports into masters and slaves.
2012-02-13 12:43:09 +01:00
system.physmem.port = system.membus.master
ruby: Set up Ruby regression tests.
2009-05-11 19:38:46 +02:00
Ruby: Connect system port in Ruby network test This patch moves the connection of the system port to create_system in Ruby.py. Thereby it allows the failing Ruby test (and other Ruby systems) to run again.
2012-01-30 15:37:06 +01:00
# Connect the system port for loading of binaries etc
MEM: Introduce the master/slave port roles in the Python classes This patch classifies all ports in Python as either Master or Slave and enforces a binding of master to slave. Conceptually, a master (such as a CPU or DMA port) issues requests, and receives responses, and conversely, a slave (such as a memory or a PIO device) receives requests and sends back responses. Currently there is no differentiation between coherent and non-coherent masters and slaves. The classification as master/slave also involves splitting the dual role port of the bus into a master and slave port and updating all the system assembly scripts to use the appropriate port. Similarly, the interrupt devices have to have their int_port split into a master and slave port. The intdev and its children have minimal changes to facilitate the extra port. Note that this patch does not enforce any port typing in the C++ world, it merely ensures that the Python objects have a notion of the port roles and are connected in an appropriate manner. This check is carried when two ports are connected, e.g. bus.master = memory.port. The following patches will make use of the classifications and specialise the C++ ports into masters and slaves.
2012-02-13 12:43:09 +01:00
system.system_port = system.membus.slave
ruby: Set up Ruby regression tests.
2009-05-11 19:38:46 +02:00
# -----------------------
# run simulation
# -----------------------
SE/FS: Make SE vs. FS mode a runtime parameter.
2012-01-28 16:24:34 +01:00
root = Root(full_system = False, system = system)
ruby: Set up Ruby regression tests.
2009-05-11 19:38:46 +02:00
root.system.mem_mode = 'timing'
Reference in a new issue Copy permalink