gem5/python/m5/objects/Uart.mpy

from Device import PioDevice

simobj Uart(PioDevice):
    type = 'Uart'
    console = Param.SimConsole(parent.any, "The console")
    size = Param.Addr(0x8, "Device size")
New and improved configuration mechanism. No more writing of wierd ini files. The ini files are still used as an intermediate step, but a sophisticated python library exists to help build them more easily. SConscript: add the new embedded file stuff remove all of the old object description junk base/inifile.cc: base/inifile.hh: get rid of findDefault and findAppend since they were the source of much evil. base/trace.cc: For now, if we don't have the dprintf_stream set up, dump to standard out. We probably want a command line option for this. dev/alpha_console.cc: PioDevice now takes a platform parameter. All PioDevices must have a pio_latency parameter. We stick a dummy parameter in here for now until we get rid of the builder stuff. dev/alpha_console.hh: don't need Platform anymore dev/baddev.cc: PioDevice now takes a platform parameter. All PioDevices must have a pio_latency parameter. We stick a dummy parameter in here for now until we get rid of the builder stuff. Same for the platform parameter, though we just pass the PioDevice a null parameter since it isn't used by this device and it's quicker. dev/baddev.hh: fix #include guards dev/etherlink.cc: rename parameters. dev/ethertap.cc: rename parameters dev/ide_ctrl.cc: All devices need an address even if it will get overwritten later. dev/ide_disk.cc: use an enum for the drive ID stuff. rename disk_delay -> delay Actually, I think that we should implement "cable select" and have the controller tell the drive what it is. dev/io_device.cc: dev/io_device.hh: All IO devices take a Platform * dev/ns_gige.cc: all devices need an io_bus. rename header_bus to io_bus We don't need stuff for the interrupt controller since it's all in the platform now. dev/ns_gige.hh: We don't need stuff for the interrupt controller now since it's all in the platform. dev/pciconfigall.cc: Pass a dummy NULL to the PioDevice for the platform since we don't need one. dev/pcidev.cc: Move a bunch of common functionality into the PciDev dev/platform.hh: remove unneeded code dev/tsunami.cc: remove unused param dev/tsunami_cchip.cc: pass platform pointer dev/tsunami_io.cc: dev/tsunami_pchip.cc: dev/uart.cc: pass platform variable dev/uart.hh: don't need to keep a platform pointer. it's in the base class kern/linux/linux_system.cc: kern/tru64/tru64_system.cc: rename some parameters sim/builder.cc: clean up builder code. use more parameters from the config node. all sections with a type= are now created, the old mechanisms no longer work sim/builder.hh: remove some extra variables since they are found in the ConfigNode sim/main.cc: add a quick hack command line argument -X to dump out the embedded files. (probably should be fixed up a little.) accept .mpy files printing to the streams has to happen after the hierarchy is built since we're moving away from param contexts sim/param.cc: add parsing support for ranges sim/process.cc: isValid isn't very useful anymore. interpret the names stdout, stderr, cout, cerr for the file descriptors sim/pyconfig/SConscript: Add Action handlers for creating an embedded python file and for creating an embedded C file. use these action handlers to embed all objects found in the objects tree into the binary along with the importer and the m5config stuff sim/pyconfig/m5config.py: Major changes to the original configuration file generator. These changes largely involve implementing copy-on-write like semantics for all of the SimObjects. Real documentation must be written. sim/universe.cc: Universe becomes a SimObject since we don't really have the notion of param contexts in the python code. --HG-- rename : sim/pyconfig/m5configbase.py => sim/pyconfig/m5config.py extra : convert_revision : c353453e5beb91c37f15755998fc0d8858c6829a 2005-01-15 10:12:25 +01:00			`from Device import PioDevice`

			`simobj Uart(PioDevice):`
Update config file language to take simobj and no longer use siminst objects/AlphaConsole.mpy: objects/AlphaTLB.mpy: objects/BadDevice.mpy: objects/BaseCPU.mpy: objects/BaseCache.mpy: objects/BaseSystem.mpy: objects/Bus.mpy: objects/CoherenceProtocol.mpy: objects/Device.mpy: objects/DiskImage.mpy: objects/Ethernet.mpy: objects/Ide.mpy: objects/IntrControl.mpy: objects/MemTest.mpy: objects/Pci.mpy: objects/PhysicalMemory.mpy: objects/Platform.mpy: objects/Process.mpy: objects/Repl.mpy: objects/Root.mpy: objects/SimConsole.mpy: objects/SimpleDisk.mpy: objects/Tsunami.mpy: objects/Uart.mpy: simobj now requires a type= line if it is actually intended to be a type sim/pyconfig/SConscript: keep track of the filename of embedded files for better error messages. sim/pyconfig/m5config.py: Add support for the trickery done with the compiler to get the simobj language feature added to the importer. fix the bug that gave objects the wrong name in error messages. test/genini.py: Globals have been fixed and use execfile --HG-- extra : convert_revision : b74495fd6f3479a87ecea7f1234ebb6731279b2b 2005-02-03 03:13:01 +01:00			`type = 'Uart'`
Enhancements to python config proxy class. python/m5/config.py: - Enhanced Proxy class now supports subscripting, e.g., parent.cpu[0] or even parent.cpu[0].icache. - Proxy also supports multiplication (e.g., parent.cycle * 3), though this feature has not been tested. - Subscript 0 works even on non-lists, so you can safely say cpu[0] and get the first cpu even if there's only one. - Changed name of proxy object from 'Super' to 'parent', and changed "wild card" notation from plain 'Super' to 'parent.any'. python/m5/objects/AlphaConsole.mpy: python/m5/objects/BaseCPU.mpy: python/m5/objects/BaseSystem.mpy: python/m5/objects/Device.mpy: python/m5/objects/Ethernet.mpy: python/m5/objects/Ide.mpy: python/m5/objects/IntrControl.mpy: python/m5/objects/Pci.mpy: python/m5/objects/PhysicalMemory.mpy: python/m5/objects/Platform.mpy: python/m5/objects/SimConsole.mpy: python/m5/objects/SimpleDisk.mpy: python/m5/objects/Tsunami.mpy: python/m5/objects/Uart.mpy: Change 'Super.foo' to 'parent.foo' (and 'Super' to 'parent.any'). --HG-- extra : convert_revision : f996d0a3366d5e3e60ae5973691148c3d7cd497d 2005-03-16 06:40:48 +01:00			`console = Param.SimConsole(parent.any, "The console")`
New and improved configuration mechanism. No more writing of wierd ini files. The ini files are still used as an intermediate step, but a sophisticated python library exists to help build them more easily. SConscript: add the new embedded file stuff remove all of the old object description junk base/inifile.cc: base/inifile.hh: get rid of findDefault and findAppend since they were the source of much evil. base/trace.cc: For now, if we don't have the dprintf_stream set up, dump to standard out. We probably want a command line option for this. dev/alpha_console.cc: PioDevice now takes a platform parameter. All PioDevices must have a pio_latency parameter. We stick a dummy parameter in here for now until we get rid of the builder stuff. dev/alpha_console.hh: don't need Platform anymore dev/baddev.cc: PioDevice now takes a platform parameter. All PioDevices must have a pio_latency parameter. We stick a dummy parameter in here for now until we get rid of the builder stuff. Same for the platform parameter, though we just pass the PioDevice a null parameter since it isn't used by this device and it's quicker. dev/baddev.hh: fix #include guards dev/etherlink.cc: rename parameters. dev/ethertap.cc: rename parameters dev/ide_ctrl.cc: All devices need an address even if it will get overwritten later. dev/ide_disk.cc: use an enum for the drive ID stuff. rename disk_delay -> delay Actually, I think that we should implement "cable select" and have the controller tell the drive what it is. dev/io_device.cc: dev/io_device.hh: All IO devices take a Platform * dev/ns_gige.cc: all devices need an io_bus. rename header_bus to io_bus We don't need stuff for the interrupt controller since it's all in the platform now. dev/ns_gige.hh: We don't need stuff for the interrupt controller now since it's all in the platform. dev/pciconfigall.cc: Pass a dummy NULL to the PioDevice for the platform since we don't need one. dev/pcidev.cc: Move a bunch of common functionality into the PciDev dev/platform.hh: remove unneeded code dev/tsunami.cc: remove unused param dev/tsunami_cchip.cc: pass platform pointer dev/tsunami_io.cc: dev/tsunami_pchip.cc: dev/uart.cc: pass platform variable dev/uart.hh: don't need to keep a platform pointer. it's in the base class kern/linux/linux_system.cc: kern/tru64/tru64_system.cc: rename some parameters sim/builder.cc: clean up builder code. use more parameters from the config node. all sections with a type= are now created, the old mechanisms no longer work sim/builder.hh: remove some extra variables since they are found in the ConfigNode sim/main.cc: add a quick hack command line argument -X to dump out the embedded files. (probably should be fixed up a little.) accept .mpy files printing to the streams has to happen after the hierarchy is built since we're moving away from param contexts sim/param.cc: add parsing support for ranges sim/process.cc: isValid isn't very useful anymore. interpret the names stdout, stderr, cout, cerr for the file descriptors sim/pyconfig/SConscript: Add Action handlers for creating an embedded python file and for creating an embedded C file. use these action handlers to embed all objects found in the objects tree into the binary along with the importer and the m5config stuff sim/pyconfig/m5config.py: Major changes to the original configuration file generator. These changes largely involve implementing copy-on-write like semantics for all of the SimObjects. Real documentation must be written. sim/universe.cc: Universe becomes a SimObject since we don't really have the notion of param contexts in the python code. --HG-- rename : sim/pyconfig/m5configbase.py => sim/pyconfig/m5config.py extra : convert_revision : c353453e5beb91c37f15755998fc0d8858c6829a 2005-01-15 10:12:25 +01:00			`size = Param.Addr(0x8, "Device size")`