sanchayanmaity/gem5
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
gem5/tests/configs/twosys-tsunami-simple-atomic.py

105 lines
4.6 KiB
Python
Raw Permalink Normal View History

add a simple netperf-stream test to the long tests. tests/SConscript: add a new configuration for two-system tests (atomic simple only) --HG-- extra : convert_revision : 16c260ab16f38779fe17b1cab18f36d5c7a70846
2006-12-01 07:24:01 +01:00
# Copyright (c) 2006 The Regents of The University of Michigan
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are
# met: redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer;
# redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution;
# neither the name of the copyright holders nor the names of its
# contributors may be used to endorse or promote products derived from
# this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
# Authors: Lisa Hsu
import m5
from m5.objects import *
config: Make configs/common a Python package Continue along the same line as the recent patch that made the Ruby-related config scripts Python packages and make also the configs/common directory a package. All affected config scripts are updated (hopefully). Note that this change makes it apparent that the current organisation and naming of the config directory and its subdirectories is rather chaotic. We mix scripts that are directly invoked with scripts that merely contain convenience functions. While it is not addressed in this patch we should follow up with a re-organisation of the config structure, and renaming of some of the packages.
2016-10-14 16:37:38 +02:00
m5.util.addToPath('../configs/')
from common.FSConfig import *
from common.Benchmarks import *
add a simple netperf-stream test to the long tests. tests/SConscript: add a new configuration for two-system tests (atomic simple only) --HG-- extra : convert_revision : 16c260ab16f38779fe17b1cab18f36d5c7a70846
2006-12-01 07:24:01 +01:00
config: Move the memory instantiation outside FSConfig This patch moves the instantiation of the memory controller outside FSConfig and instead relies on the mem_ranges to pass the information to the caller (e.g. fs.py or one of the regression scripts). The main motivation for this change is to expose the structural composition of the memory system and allow more tuning and configuration without adding a large number of options to the makeSystem functions. The patch updates the relevant example scripts to maintain the current functionality. As the order that ports are connected to the memory bus changes (in certain regresisons), some bus stats are shuffled around. For example, what used to be layer 0 is now layer 1. Going forward, options will be added to support the addition of multi-channel memory controllers.
2013-08-19 09:52:27 +02:00
test_sys = makeLinuxAlphaSystem('atomic',
SysConfig('netperf-stream-client.rcS'))
sim: Add the notion of clock domains to all ClockedObjects This patch adds the notion of source- and derived-clock domains to the ClockedObjects. As such, all clock information is moved to the clock domain, and the ClockedObjects are grouped into domains. The clock domains are either source domains, with a specific clock period, or derived domains that have a parent domain and a divider (potentially chained). For piece of logic that runs at a derived clock (a ratio of the clock its parent is running at) the necessary derived clock domain is created from its corresponding parent clock domain. For now, the derived clock domain only supports a divider, thus ensuring a lower speed compared to its parent. Multiplier functionality implies a PLL logic that has not been modelled yet (create a separate clock instead). The clock domains should be used as a mechanism to provide a controllable clock source that affects clock for every clocked object lying beneath it. The clock of the domain can (in a future patch) be controlled by a handler responsible for dynamic frequency scaling of the respective clock domains. All the config scripts have been retro-fitted with clock domains. For the System a default SrcClockDomain is created. For CPUs that run at a different speed than the system, there is a seperate clock domain created. This domain incorporates the CPU and the associated caches. As before, Ruby runs under its own clock domain. The clock period of all domains are pre-computed, such that no virtual functions or multiplications are needed when calling clockPeriod. Instead, the clock period is pre-computed when any changes occur. For this to be possible, each clock domain tracks its children.
2013-06-27 11:49:49 +02:00
power: Add voltage domains to the clock domains This patch adds the notion of voltage domains, and groups clock domains that operate under the same voltage (i.e. power supply) into domains. Each clock domain is required to be associated with a voltage domain, and the latter requires the voltage to be explicitly set. A voltage domain is an independently controllable voltage supply being provided to section of the design. Thus, if you wish to perform dynamic voltage scaling on a CPU, its clock domain should be associated with a separate voltage domain. The current implementation of the voltage domain does not take into consideration cases where there are derived voltage domains running at ratio of native voltage domains, as with the case where there can be on-chip buck/boost (charge pumps) voltage regulation logic. The regression and configuration scripts are updated with a generic voltage domain for the system, and one for the CPUs.
2013-08-19 09:52:28 +02:00
# Dummy voltage domain for all test_sys clock domains
test_sys.voltage_domain = VoltageDomain()
sim: Add the notion of clock domains to all ClockedObjects This patch adds the notion of source- and derived-clock domains to the ClockedObjects. As such, all clock information is moved to the clock domain, and the ClockedObjects are grouped into domains. The clock domains are either source domains, with a specific clock period, or derived domains that have a parent domain and a divider (potentially chained). For piece of logic that runs at a derived clock (a ratio of the clock its parent is running at) the necessary derived clock domain is created from its corresponding parent clock domain. For now, the derived clock domain only supports a divider, thus ensuring a lower speed compared to its parent. Multiplier functionality implies a PLL logic that has not been modelled yet (create a separate clock instead). The clock domains should be used as a mechanism to provide a controllable clock source that affects clock for every clocked object lying beneath it. The clock of the domain can (in a future patch) be controlled by a handler responsible for dynamic frequency scaling of the respective clock domains. All the config scripts have been retro-fitted with clock domains. For the System a default SrcClockDomain is created. For CPUs that run at a different speed than the system, there is a seperate clock domain created. This domain incorporates the CPU and the associated caches. As before, Ruby runs under its own clock domain. The clock period of all domains are pre-computed, such that no virtual functions or multiplications are needed when calling clockPeriod. Instead, the clock period is pre-computed when any changes occur. For this to be possible, each clock domain tracks its children.
2013-06-27 11:49:49 +02:00
# Create the system clock domain
power: Add voltage domains to the clock domains This patch adds the notion of voltage domains, and groups clock domains that operate under the same voltage (i.e. power supply) into domains. Each clock domain is required to be associated with a voltage domain, and the latter requires the voltage to be explicitly set. A voltage domain is an independently controllable voltage supply being provided to section of the design. Thus, if you wish to perform dynamic voltage scaling on a CPU, its clock domain should be associated with a separate voltage domain. The current implementation of the voltage domain does not take into consideration cases where there are derived voltage domains running at ratio of native voltage domains, as with the case where there can be on-chip buck/boost (charge pumps) voltage regulation logic. The regression and configuration scripts are updated with a generic voltage domain for the system, and one for the CPUs.
2013-08-19 09:52:28 +02:00
test_sys.clk_domain = SrcClockDomain(clock = '1GHz',
voltage_domain = test_sys.voltage_domain)
sim: Add the notion of clock domains to all ClockedObjects This patch adds the notion of source- and derived-clock domains to the ClockedObjects. As such, all clock information is moved to the clock domain, and the ClockedObjects are grouped into domains. The clock domains are either source domains, with a specific clock period, or derived domains that have a parent domain and a divider (potentially chained). For piece of logic that runs at a derived clock (a ratio of the clock its parent is running at) the necessary derived clock domain is created from its corresponding parent clock domain. For now, the derived clock domain only supports a divider, thus ensuring a lower speed compared to its parent. Multiplier functionality implies a PLL logic that has not been modelled yet (create a separate clock instead). The clock domains should be used as a mechanism to provide a controllable clock source that affects clock for every clocked object lying beneath it. The clock of the domain can (in a future patch) be controlled by a handler responsible for dynamic frequency scaling of the respective clock domains. All the config scripts have been retro-fitted with clock domains. For the System a default SrcClockDomain is created. For CPUs that run at a different speed than the system, there is a seperate clock domain created. This domain incorporates the CPU and the associated caches. As before, Ruby runs under its own clock domain. The clock period of all domains are pre-computed, such that no virtual functions or multiplications are needed when calling clockPeriod. Instead, the clock period is pre-computed when any changes occur. For this to be possible, each clock domain tracks its children.
2013-06-27 11:49:49 +02:00
add a simple netperf-stream test to the long tests. tests/SConscript: add a new configuration for two-system tests (atomic simple only) --HG-- extra : convert_revision : 16c260ab16f38779fe17b1cab18f36d5c7a70846
2006-12-01 07:24:01 +01:00
test_sys.cpu = AtomicSimpleCPU(cpu_id=0)
CPU: Check that the interrupt controller is created when needed This patch adds a creation-time check to the CPU to ensure that the interrupt controller is created for the cases where it is needed, i.e. if the CPU is not being switched in later and not a checker CPU. The patch also adds the "createInterruptController" call to a number of the regression scripts.
2012-03-02 15:21:48 +01:00
# create the interrupt controller
test_sys.cpu.createInterruptController()
Config: Keep track of uncached and cached ports separately. This makes sure that the address ranges requested for caches and uncached ports don't conflict with each other, and that accesses which are always uncached (message signaled interrupts for instance) don't waste time passing through caches.
2011-02-04 05:23:00 +01:00
test_sys.cpu.connectAllPorts(test_sys.membus)
sim: Add the notion of clock domains to all ClockedObjects This patch adds the notion of source- and derived-clock domains to the ClockedObjects. As such, all clock information is moved to the clock domain, and the ClockedObjects are grouped into domains. The clock domains are either source domains, with a specific clock period, or derived domains that have a parent domain and a divider (potentially chained). For piece of logic that runs at a derived clock (a ratio of the clock its parent is running at) the necessary derived clock domain is created from its corresponding parent clock domain. For now, the derived clock domain only supports a divider, thus ensuring a lower speed compared to its parent. Multiplier functionality implies a PLL logic that has not been modelled yet (create a separate clock instead). The clock domains should be used as a mechanism to provide a controllable clock source that affects clock for every clocked object lying beneath it. The clock of the domain can (in a future patch) be controlled by a handler responsible for dynamic frequency scaling of the respective clock domains. All the config scripts have been retro-fitted with clock domains. For the System a default SrcClockDomain is created. For CPUs that run at a different speed than the system, there is a seperate clock domain created. This domain incorporates the CPU and the associated caches. As before, Ruby runs under its own clock domain. The clock period of all domains are pre-computed, such that no virtual functions or multiplications are needed when calling clockPeriod. Instead, the clock period is pre-computed when any changes occur. For this to be possible, each clock domain tracks its children.
2013-06-27 11:49:49 +02:00
# Create a seperate clock domain for components that should run at
# CPUs frequency
power: Add voltage domains to the clock domains This patch adds the notion of voltage domains, and groups clock domains that operate under the same voltage (i.e. power supply) into domains. Each clock domain is required to be associated with a voltage domain, and the latter requires the voltage to be explicitly set. A voltage domain is an independently controllable voltage supply being provided to section of the design. Thus, if you wish to perform dynamic voltage scaling on a CPU, its clock domain should be associated with a separate voltage domain. The current implementation of the voltage domain does not take into consideration cases where there are derived voltage domains running at ratio of native voltage domains, as with the case where there can be on-chip buck/boost (charge pumps) voltage regulation logic. The regression and configuration scripts are updated with a generic voltage domain for the system, and one for the CPUs.
2013-08-19 09:52:28 +02:00
test_sys.cpu.clk_domain = SrcClockDomain(clock = '2GHz',
voltage_domain =
test_sys.voltage_domain)
sim: Add the notion of clock domains to all ClockedObjects This patch adds the notion of source- and derived-clock domains to the ClockedObjects. As such, all clock information is moved to the clock domain, and the ClockedObjects are grouped into domains. The clock domains are either source domains, with a specific clock period, or derived domains that have a parent domain and a divider (potentially chained). For piece of logic that runs at a derived clock (a ratio of the clock its parent is running at) the necessary derived clock domain is created from its corresponding parent clock domain. For now, the derived clock domain only supports a divider, thus ensuring a lower speed compared to its parent. Multiplier functionality implies a PLL logic that has not been modelled yet (create a separate clock instead). The clock domains should be used as a mechanism to provide a controllable clock source that affects clock for every clocked object lying beneath it. The clock of the domain can (in a future patch) be controlled by a handler responsible for dynamic frequency scaling of the respective clock domains. All the config scripts have been retro-fitted with clock domains. For the System a default SrcClockDomain is created. For CPUs that run at a different speed than the system, there is a seperate clock domain created. This domain incorporates the CPU and the associated caches. As before, Ruby runs under its own clock domain. The clock period of all domains are pre-computed, such that no virtual functions or multiplications are needed when calling clockPeriod. Instead, the clock period is pre-computed when any changes occur. For this to be possible, each clock domain tracks its children.
2013-06-27 11:49:49 +02:00
# Create a separate clock domain for Ethernet
power: Add voltage domains to the clock domains This patch adds the notion of voltage domains, and groups clock domains that operate under the same voltage (i.e. power supply) into domains. Each clock domain is required to be associated with a voltage domain, and the latter requires the voltage to be explicitly set. A voltage domain is an independently controllable voltage supply being provided to section of the design. Thus, if you wish to perform dynamic voltage scaling on a CPU, its clock domain should be associated with a separate voltage domain. The current implementation of the voltage domain does not take into consideration cases where there are derived voltage domains running at ratio of native voltage domains, as with the case where there can be on-chip buck/boost (charge pumps) voltage regulation logic. The regression and configuration scripts are updated with a generic voltage domain for the system, and one for the CPUs.
2013-08-19 09:52:28 +02:00
test_sys.tsunami.ethernet.clk_domain = SrcClockDomain(clock = '500MHz',
voltage_domain =
test_sys.voltage_domain)
sim: Add the notion of clock domains to all ClockedObjects This patch adds the notion of source- and derived-clock domains to the ClockedObjects. As such, all clock information is moved to the clock domain, and the ClockedObjects are grouped into domains. The clock domains are either source domains, with a specific clock period, or derived domains that have a parent domain and a divider (potentially chained). For piece of logic that runs at a derived clock (a ratio of the clock its parent is running at) the necessary derived clock domain is created from its corresponding parent clock domain. For now, the derived clock domain only supports a divider, thus ensuring a lower speed compared to its parent. Multiplier functionality implies a PLL logic that has not been modelled yet (create a separate clock instead). The clock domains should be used as a mechanism to provide a controllable clock source that affects clock for every clocked object lying beneath it. The clock of the domain can (in a future patch) be controlled by a handler responsible for dynamic frequency scaling of the respective clock domains. All the config scripts have been retro-fitted with clock domains. For the System a default SrcClockDomain is created. For CPUs that run at a different speed than the system, there is a seperate clock domain created. This domain incorporates the CPU and the associated caches. As before, Ruby runs under its own clock domain. The clock period of all domains are pre-computed, such that no virtual functions or multiplications are needed when calling clockPeriod. Instead, the clock period is pre-computed when any changes occur. For this to be possible, each clock domain tracks its children.
2013-06-27 11:49:49 +02:00
MEM: Make the bus bridge unidirectional and fixed address range This patch makes the bus bridge uni-directional and specialises the bus ports to be a master port and a slave port. This greatly simplifies the assumptions on both sides as either port only has to deal with requests or responses. The following patches introduce the notion of master and slave ports, and would not be possible without this split of responsibilities. In making the bridge unidirectional, the address range mechanism of the bridge is also changed. For the cases where communication is taking place both ways, an additional bridge is needed. This causes issues with the existing mechanism, as the busses cannot determine when to stop iterating the address updates from the two bridges. To avoid this issue, and also greatly simplify the specification, the bridge now has a fixed set of address ranges, specified at creation time.
2012-01-17 19:55:09 +01:00
# In contrast to the other (one-system) Tsunami configurations we do
# not have an IO cache but instead rely on an IO bridge for accesses
# from masters on the IO bus to the memory bus
config: Do not use hardcoded physmem in fs script This patch generalises the address range resolution for the I/O cache and I/O bridge such that they do not assume a single memory. The patch involves adding a parameter to the system which is then defined based on the memories that are to be visible from the I/O subsystem, whether behind a cache or a bridge. The change is needed to allow interleaved memory controllers in the system.
2013-01-07 19:05:38 +01:00
test_sys.iobridge = Bridge(delay='50ns', ranges = test_sys.mem_ranges)
MEM: Introduce the master/slave port roles in the Python classes This patch classifies all ports in Python as either Master or Slave and enforces a binding of master to slave. Conceptually, a master (such as a CPU or DMA port) issues requests, and receives responses, and conversely, a slave (such as a memory or a PIO device) receives requests and sends back responses. Currently there is no differentiation between coherent and non-coherent masters and slaves. The classification as master/slave also involves splitting the dual role port of the bus into a master and slave port and updating all the system assembly scripts to use the appropriate port. Similarly, the interrupt devices have to have their int_port split into a master and slave port. The intdev and its children have minimal changes to facilitate the extra port. Note that this patch does not enforce any port typing in the C++ world, it merely ensures that the Python objects have a notion of the port roles and are connected in an appropriate manner. This check is carried when two ports are connected, e.g. bus.master = memory.port. The following patches will make use of the classifications and specialise the C++ ports into masters and slaves.
2012-02-13 12:43:09 +01:00
test_sys.iobridge.slave = test_sys.iobus.master
test_sys.iobridge.master = test_sys.membus.slave
add a simple netperf-stream test to the long tests. tests/SConscript: add a new configuration for two-system tests (atomic simple only) --HG-- extra : convert_revision : 16c260ab16f38779fe17b1cab18f36d5c7a70846
2006-12-01 07:24:01 +01:00
config: Move the memory instantiation outside FSConfig This patch moves the instantiation of the memory controller outside FSConfig and instead relies on the mem_ranges to pass the information to the caller (e.g. fs.py or one of the regression scripts). The main motivation for this change is to expose the structural composition of the memory system and allow more tuning and configuration without adding a large number of options to the makeSystem functions. The patch updates the relevant example scripts to maintain the current functionality. As the order that ports are connected to the memory bus changes (in certain regresisons), some bus stats are shuffled around. For example, what used to be layer 0 is now layer 1. Going forward, options will be added to support the addition of multi-channel memory controllers.
2013-08-19 09:52:27 +02:00
test_sys.physmem = SimpleMemory(range = test_sys.mem_ranges[0])
test_sys.physmem.port = test_sys.membus.master
drive_sys = makeLinuxAlphaSystem('atomic',
add a simple netperf-stream test to the long tests. tests/SConscript: add a new configuration for two-system tests (atomic simple only) --HG-- extra : convert_revision : 16c260ab16f38779fe17b1cab18f36d5c7a70846
2006-12-01 07:24:01 +01:00
SysConfig('netperf-server.rcS'))
power: Add voltage domains to the clock domains This patch adds the notion of voltage domains, and groups clock domains that operate under the same voltage (i.e. power supply) into domains. Each clock domain is required to be associated with a voltage domain, and the latter requires the voltage to be explicitly set. A voltage domain is an independently controllable voltage supply being provided to section of the design. Thus, if you wish to perform dynamic voltage scaling on a CPU, its clock domain should be associated with a separate voltage domain. The current implementation of the voltage domain does not take into consideration cases where there are derived voltage domains running at ratio of native voltage domains, as with the case where there can be on-chip buck/boost (charge pumps) voltage regulation logic. The regression and configuration scripts are updated with a generic voltage domain for the system, and one for the CPUs.
2013-08-19 09:52:28 +02:00
# Dummy voltage domain for all drive_sys clock domains
drive_sys.voltage_domain = VoltageDomain()
sim: Add the notion of clock domains to all ClockedObjects This patch adds the notion of source- and derived-clock domains to the ClockedObjects. As such, all clock information is moved to the clock domain, and the ClockedObjects are grouped into domains. The clock domains are either source domains, with a specific clock period, or derived domains that have a parent domain and a divider (potentially chained). For piece of logic that runs at a derived clock (a ratio of the clock its parent is running at) the necessary derived clock domain is created from its corresponding parent clock domain. For now, the derived clock domain only supports a divider, thus ensuring a lower speed compared to its parent. Multiplier functionality implies a PLL logic that has not been modelled yet (create a separate clock instead). The clock domains should be used as a mechanism to provide a controllable clock source that affects clock for every clocked object lying beneath it. The clock of the domain can (in a future patch) be controlled by a handler responsible for dynamic frequency scaling of the respective clock domains. All the config scripts have been retro-fitted with clock domains. For the System a default SrcClockDomain is created. For CPUs that run at a different speed than the system, there is a seperate clock domain created. This domain incorporates the CPU and the associated caches. As before, Ruby runs under its own clock domain. The clock period of all domains are pre-computed, such that no virtual functions or multiplications are needed when calling clockPeriod. Instead, the clock period is pre-computed when any changes occur. For this to be possible, each clock domain tracks its children.
2013-06-27 11:49:49 +02:00
# Create the system clock domain
power: Add voltage domains to the clock domains This patch adds the notion of voltage domains, and groups clock domains that operate under the same voltage (i.e. power supply) into domains. Each clock domain is required to be associated with a voltage domain, and the latter requires the voltage to be explicitly set. A voltage domain is an independently controllable voltage supply being provided to section of the design. Thus, if you wish to perform dynamic voltage scaling on a CPU, its clock domain should be associated with a separate voltage domain. The current implementation of the voltage domain does not take into consideration cases where there are derived voltage domains running at ratio of native voltage domains, as with the case where there can be on-chip buck/boost (charge pumps) voltage regulation logic. The regression and configuration scripts are updated with a generic voltage domain for the system, and one for the CPUs.
2013-08-19 09:52:28 +02:00
drive_sys.clk_domain = SrcClockDomain(clock = '1GHz',
voltage_domain =
drive_sys.voltage_domain)
add a simple netperf-stream test to the long tests. tests/SConscript: add a new configuration for two-system tests (atomic simple only) --HG-- extra : convert_revision : 16c260ab16f38779fe17b1cab18f36d5c7a70846
2006-12-01 07:24:01 +01:00
drive_sys.cpu = AtomicSimpleCPU(cpu_id=0)
CPU: Check that the interrupt controller is created when needed This patch adds a creation-time check to the CPU to ensure that the interrupt controller is created for the cases where it is needed, i.e. if the CPU is not being switched in later and not a checker CPU. The patch also adds the "createInterruptController" call to a number of the regression scripts.
2012-03-02 15:21:48 +01:00
# create the interrupt controller
drive_sys.cpu.createInterruptController()
Config: Keep track of uncached and cached ports separately. This makes sure that the address ranges requested for caches and uncached ports don't conflict with each other, and that accesses which are always uncached (message signaled interrupts for instance) don't waste time passing through caches.
2011-02-04 05:23:00 +01:00
drive_sys.cpu.connectAllPorts(drive_sys.membus)
sim: Add the notion of clock domains to all ClockedObjects This patch adds the notion of source- and derived-clock domains to the ClockedObjects. As such, all clock information is moved to the clock domain, and the ClockedObjects are grouped into domains. The clock domains are either source domains, with a specific clock period, or derived domains that have a parent domain and a divider (potentially chained). For piece of logic that runs at a derived clock (a ratio of the clock its parent is running at) the necessary derived clock domain is created from its corresponding parent clock domain. For now, the derived clock domain only supports a divider, thus ensuring a lower speed compared to its parent. Multiplier functionality implies a PLL logic that has not been modelled yet (create a separate clock instead). The clock domains should be used as a mechanism to provide a controllable clock source that affects clock for every clocked object lying beneath it. The clock of the domain can (in a future patch) be controlled by a handler responsible for dynamic frequency scaling of the respective clock domains. All the config scripts have been retro-fitted with clock domains. For the System a default SrcClockDomain is created. For CPUs that run at a different speed than the system, there is a seperate clock domain created. This domain incorporates the CPU and the associated caches. As before, Ruby runs under its own clock domain. The clock period of all domains are pre-computed, such that no virtual functions or multiplications are needed when calling clockPeriod. Instead, the clock period is pre-computed when any changes occur. For this to be possible, each clock domain tracks its children.
2013-06-27 11:49:49 +02:00
# Create a seperate clock domain for components that should run at
# CPUs frequency
power: Add voltage domains to the clock domains This patch adds the notion of voltage domains, and groups clock domains that operate under the same voltage (i.e. power supply) into domains. Each clock domain is required to be associated with a voltage domain, and the latter requires the voltage to be explicitly set. A voltage domain is an independently controllable voltage supply being provided to section of the design. Thus, if you wish to perform dynamic voltage scaling on a CPU, its clock domain should be associated with a separate voltage domain. The current implementation of the voltage domain does not take into consideration cases where there are derived voltage domains running at ratio of native voltage domains, as with the case where there can be on-chip buck/boost (charge pumps) voltage regulation logic. The regression and configuration scripts are updated with a generic voltage domain for the system, and one for the CPUs.
2013-08-19 09:52:28 +02:00
drive_sys.cpu.clk_domain = SrcClockDomain(clock = '4GHz',
voltage_domain =
drive_sys.voltage_domain)
sim: Add the notion of clock domains to all ClockedObjects This patch adds the notion of source- and derived-clock domains to the ClockedObjects. As such, all clock information is moved to the clock domain, and the ClockedObjects are grouped into domains. The clock domains are either source domains, with a specific clock period, or derived domains that have a parent domain and a divider (potentially chained). For piece of logic that runs at a derived clock (a ratio of the clock its parent is running at) the necessary derived clock domain is created from its corresponding parent clock domain. For now, the derived clock domain only supports a divider, thus ensuring a lower speed compared to its parent. Multiplier functionality implies a PLL logic that has not been modelled yet (create a separate clock instead). The clock domains should be used as a mechanism to provide a controllable clock source that affects clock for every clocked object lying beneath it. The clock of the domain can (in a future patch) be controlled by a handler responsible for dynamic frequency scaling of the respective clock domains. All the config scripts have been retro-fitted with clock domains. For the System a default SrcClockDomain is created. For CPUs that run at a different speed than the system, there is a seperate clock domain created. This domain incorporates the CPU and the associated caches. As before, Ruby runs under its own clock domain. The clock period of all domains are pre-computed, such that no virtual functions or multiplications are needed when calling clockPeriod. Instead, the clock period is pre-computed when any changes occur. For this to be possible, each clock domain tracks its children.
2013-06-27 11:49:49 +02:00
# Create a separate clock domain for Ethernet
power: Add voltage domains to the clock domains This patch adds the notion of voltage domains, and groups clock domains that operate under the same voltage (i.e. power supply) into domains. Each clock domain is required to be associated with a voltage domain, and the latter requires the voltage to be explicitly set. A voltage domain is an independently controllable voltage supply being provided to section of the design. Thus, if you wish to perform dynamic voltage scaling on a CPU, its clock domain should be associated with a separate voltage domain. The current implementation of the voltage domain does not take into consideration cases where there are derived voltage domains running at ratio of native voltage domains, as with the case where there can be on-chip buck/boost (charge pumps) voltage regulation logic. The regression and configuration scripts are updated with a generic voltage domain for the system, and one for the CPUs.
2013-08-19 09:52:28 +02:00
drive_sys.tsunami.ethernet.clk_domain = SrcClockDomain(clock = '500MHz',
voltage_domain =
drive_sys.voltage_domain)
sim: Add the notion of clock domains to all ClockedObjects This patch adds the notion of source- and derived-clock domains to the ClockedObjects. As such, all clock information is moved to the clock domain, and the ClockedObjects are grouped into domains. The clock domains are either source domains, with a specific clock period, or derived domains that have a parent domain and a divider (potentially chained). For piece of logic that runs at a derived clock (a ratio of the clock its parent is running at) the necessary derived clock domain is created from its corresponding parent clock domain. For now, the derived clock domain only supports a divider, thus ensuring a lower speed compared to its parent. Multiplier functionality implies a PLL logic that has not been modelled yet (create a separate clock instead). The clock domains should be used as a mechanism to provide a controllable clock source that affects clock for every clocked object lying beneath it. The clock of the domain can (in a future patch) be controlled by a handler responsible for dynamic frequency scaling of the respective clock domains. All the config scripts have been retro-fitted with clock domains. For the System a default SrcClockDomain is created. For CPUs that run at a different speed than the system, there is a seperate clock domain created. This domain incorporates the CPU and the associated caches. As before, Ruby runs under its own clock domain. The clock period of all domains are pre-computed, such that no virtual functions or multiplications are needed when calling clockPeriod. Instead, the clock period is pre-computed when any changes occur. For this to be possible, each clock domain tracks its children.
2013-06-27 11:49:49 +02:00
config: Do not use hardcoded physmem in fs script This patch generalises the address range resolution for the I/O cache and I/O bridge such that they do not assume a single memory. The patch involves adding a parameter to the system which is then defined based on the memories that are to be visible from the I/O subsystem, whether behind a cache or a bridge. The change is needed to allow interleaved memory controllers in the system.
2013-01-07 19:05:38 +01:00
drive_sys.iobridge = Bridge(delay='50ns', ranges = drive_sys.mem_ranges)
MEM: Introduce the master/slave port roles in the Python classes This patch classifies all ports in Python as either Master or Slave and enforces a binding of master to slave. Conceptually, a master (such as a CPU or DMA port) issues requests, and receives responses, and conversely, a slave (such as a memory or a PIO device) receives requests and sends back responses. Currently there is no differentiation between coherent and non-coherent masters and slaves. The classification as master/slave also involves splitting the dual role port of the bus into a master and slave port and updating all the system assembly scripts to use the appropriate port. Similarly, the interrupt devices have to have their int_port split into a master and slave port. The intdev and its children have minimal changes to facilitate the extra port. Note that this patch does not enforce any port typing in the C++ world, it merely ensures that the Python objects have a notion of the port roles and are connected in an appropriate manner. This check is carried when two ports are connected, e.g. bus.master = memory.port. The following patches will make use of the classifications and specialise the C++ ports into masters and slaves.
2012-02-13 12:43:09 +01:00
drive_sys.iobridge.slave = drive_sys.iobus.master
drive_sys.iobridge.master = drive_sys.membus.slave
add a simple netperf-stream test to the long tests. tests/SConscript: add a new configuration for two-system tests (atomic simple only) --HG-- extra : convert_revision : 16c260ab16f38779fe17b1cab18f36d5c7a70846
2006-12-01 07:24:01 +01:00
config: Move the memory instantiation outside FSConfig This patch moves the instantiation of the memory controller outside FSConfig and instead relies on the mem_ranges to pass the information to the caller (e.g. fs.py or one of the regression scripts). The main motivation for this change is to expose the structural composition of the memory system and allow more tuning and configuration without adding a large number of options to the makeSystem functions. The patch updates the relevant example scripts to maintain the current functionality. As the order that ports are connected to the memory bus changes (in certain regresisons), some bus stats are shuffled around. For example, what used to be layer 0 is now layer 1. Going forward, options will be added to support the addition of multi-channel memory controllers.
2013-08-19 09:52:27 +02:00
drive_sys.physmem = SimpleMemory(range = drive_sys.mem_ranges[0])
drive_sys.physmem.port = drive_sys.membus.master
SE/FS: Make SE vs. FS mode a runtime parameter.
2012-01-28 16:24:34 +01:00
root = makeDualRoot(True, test_sys, drive_sys, "ethertrace")
add a simple netperf-stream test to the long tests. tests/SConscript: add a new configuration for two-system tests (atomic simple only) --HG-- extra : convert_revision : 16c260ab16f38779fe17b1cab18f36d5c7a70846
2006-12-01 07:24:01 +01:00
maxtick = 199999999
Reference in a new issue Copy permalink