xv6-cs450/Notes
2006-08-12 22:34:13 +00:00

367 lines
11 KiB
Text

bochs 2.2.6:
./configure --enable-smp --enable-disasm --enable-debugger --enable-all-optimizations --enable-4meg-pages --enable-global-pages --enable-pae --disable-reset-on-triple-fault
bochs CVS after 2.2.6:
./configure --enable-smp --enable-disasm --enable-debugger --enable-all-optimizations --enable-4meg-pages --enable-global-pages --enable-pae
bootmain.c doesn't work right if the ELF sections aren't
sector-aligned. so you can't use ld -N. and the sections may also need
to be non-zero length, only really matters for tiny "kernels".
kernel loaded at 1 megabyte. stack same place that bootasm.S left it.
kinit() should find real mem size
and rescue useable memory below 1 meg
no paging, no use of page table hardware, just segments
no user area: no magic kernel stack mapping
so no copying of kernel stack during fork
though there is a kernel stack page for each process
no kernel malloc(), just kalloc() for user core
user pointers aren't valid in the kernel
setting up first process
we do want a process zero, as template
but not runnable
just set up return-from-trap frame on new kernel stack
fake user program that calls exec
map text read-only?
shared text?
what's on the stack during a trap or sys call?
PUSHA before scheduler switch? for callee-saved registers.
segment contents?
what does iret need to get out of the kernel?
how does INT know what kernel stack to use?
are interrupts turned on in the kernel? probably.
per-cpu curproc
one tss per process, or one per cpu?
one segment array per cpu, or per process?
pass curproc explicitly, or implicit from cpu #?
e.g. argument to newproc()?
hmm, you need a global curproc[cpu] for trap() &c
test stack expansion
test running out of memory, process slots
we can't really use a separate stack segment, since stack addresses
need to work correctly as ordinary pointers. the same may be true of
data vs text. how can we have a gap between data and stack, so that
both can grow, without committing 4GB of physical memory? does this
mean we need paging?
what's the simplest way to add the paging we need?
one page table, re-write it each time we leave the kernel?
page table per process?
probably need to use 0-0xffffffff segments, so that
both data and stack pointers always work
so is it now worth it to make a process's phys mem contiguous?
or could use segment limits and 4 meg pages?
but limits would prevent using stack pointers as data pointers
how to write-protect text? not important?
perhaps have fixed-size stack, put it in the data segment?
oops, if kernel stack is in contiguous user phys mem, then moving
users' memory (e.g. to expand it) will wreck any pointers into the
kernel stack.
do we need to set fs and gs? so user processes can't abuse them?
setupsegs() may modify current segment table, is that legal?
trap() ought to lgdt on return, since currently only done in swtch()
protect hardware interrupt vectors from user INT instructions?
test out-of-fd cases for creating pipe.
test pipe reader closes then write
test two readers, two writers.
test children being inherited by grandparent &c
some sleep()s should be interruptible by kill()
cli/sti in acquire/release should nest!
in case you acquire two locks
what would need fixing if we got rid of kernel_lock?
console output
proc_exit() needs lock on proc *array* to deallocate
kill() needs lock on proc *array*
allocator's free list
global fd table (really free-ness)
sys_close() on fd table
fork on proc list, also next pid
hold lock until public slots in proc struct initialized
locks
init_lock
sequences CPU startup
proc_table_lock
also protects next_pid
per-fd lock *just* protects count read-modify-write
also maybe freeness?
memory allocator
printf
wakeup needs proc_table_lock
so we need recursive locks?
or you must hold the lock to call wakeup?
in general, the table locks protect both free-ness and
public variables of table elements
in many cases you can use table elements w/o a lock
e.g. if you are the process, or you are using an fd
lock code shouldn't call cprintf...
nasty hack to allow locks before first process,
and to allow them in interrupts when curproc may be zero
race between release and sleep in sys_wait()
race between sys_exit waking up parent and setting state=ZOMBIE
race in pipe code when full/empty
lock order
per-pipe lock
proc_table_lock fd_table_lock kalloc_lock
console_lock
condition variable + mutex that protects it
proc * (for wait()), proc_table_lock
pipe structure, pipe lock
systematic way to test sleep races?
print something at the start of sleep?
do you have to be holding the mutex in order to call wakeup()?
device interrupts don't clear FL_IF
so a recursive timer interrupt is possible
what does inode->busy mean?
might be held across disk reads
no-one is allowed to do anything to the inode
protected by inode_table_lock
inode->count counts in-memory pointers to the struct
prevents inode[] element from being re-used
protected by inode_table_lock
blocks and inodes have ad-hoc sleep-locks
provide a single mechanism?
need to lock bufs in bio between bread and brelse
test 14-character file names
and file arguments longer than 14
and directories longer than one sector
kalloc() can return 0; do callers handle this right?
why directing interrupts to cpu 1 causes trouble
cpu 1 turns on interrupts with no tss!
and perhaps a stale gdt (from boot)
since it has never run a process, never called setupsegs()
but does cpu really need the tss?
not switching stacks
fake process per cpu, just for tss?
seems like a waste
move tss to cpu[]?
but tss points to per-process kernel stack
would also give us a gdt
OOPS that wasn't the problem
wait for other cpu to finish starting before enabling interrupts?
some kind of crash in ide_init ioapic_enable cprintf
move ide_init before mp_start?
didn't do any good
maybe cpu0 taking ide interrupt, cpu1 getting a nested lock error
cprintfs are screwed up if locking is off
often loops forever
hah, just use lpt alone
looks like cpu0 took the ide interrupt and was the last to hold
the lock, but cpu1 thinks it is nested
cpu0 is in load_icode / printf / cons_putc
probably b/c cpu1 cleared use_console_lock
cpu1 is in scheduler() / printf / acquire
1: init timer
0: init timer
cpu 1 initial nlock 1
ne0s:t iidd el_occnkt rc
onsole cpu 1 old caller stack 1001A5 10071D 104DFF 1049FE
panic: acquire
^CNext at t=33002418
(0) [0x00100091] 0008:0x00100091 (unk. ctxt): jmp .+0xfffffffe ; ebfe
(1) [0x00100332] 0008:0x00100332 (unk. ctxt): jmp .+0xfffffffe
why is output interleaved even before panic?
does release turn on interrupts even inside an interrupt handler?
overflowing cpu[] stack?
probably not, change from 512 to 4096 didn't do anything
1: init timer
0: init timer
cnpeus te11 linnitki aclo nnoolleek cp1u
ss oarltd sccahleldeul esrt aocnk cpu 0111 Ej6 buf1 01A3140 C5118
0
la anic1::7 0a0c0 uuirr e
^CNext at t=31691050
(0) [0x00100373] 0008:0x00100373 (unk. ctxt): jmp .+0xfffffffe ; ebfe
(1) [0x00100091] 0008:0x00100091 (unk. ctxt): jmp .+0xfffffffe ; ebfe
cpu0:
0: init timer
nested lock console cpu 0 old caller stack 1001e6 101a34 1 0
(that's mpmain)
panic: acquire
cpu1:
1: init timer
cpu 1 initial nlock 1
start scheduler on cpu 1 jmpbuf ...
la 107000 lr ...
that is, nlock != 0
maybe a race; acquire does
locked = 1
cpu = cpu()
what if another acquire calls holding w/ locked = 1 but
before cpu is set?
if I type a lot (kbd), i get a panic
cpu1 in scheduler: panic "holding locks in scheduler"
cpu0 also in the same panic!
recursive interrupt?
FL_IF is probably set during interrupt... is that correct?
again:
olding locks in scheduler
trap v 33 eip 100ED3 c (that is, interrupt while holding a lock)
100ed3 is in lapic_write
again:
trap v 33 eip 102A3C cpu 1 nlock 1 (in acquire)
panic: interrupt while holding a lock
again:
trap v 33 eip 102A3C cpu 1 nlock 1
panic: interrupt while holding a lock
OR is it the cprintf("kbd overflow")?
no, get panic even w/o that cprintf
OR a release() at interrupt time turns interrupts back on?
of course i don't think they were off...
OK, fixing trap.c to make interrupts turn off FL_IF
that makes it take longer, but still panics
(maybe b/c release sets FL_IF)
shouldn't something (PIC?) prevent recursive interrupts of same IRQ?
or should FL_IF be clear during all interrupts?
maybe acquire should remember old FL_IF value, release should restore
if acquire did cli()
DUH the increment of nlock in acquire() happens before the cli!
so the panic is probably not a real problem
test nlock, cli(), then increment?
BUT now userfs doesn't do the final cat README
AND w/ cprintf("kbd overflow"), panic holding locks in scheduler
maybe also simulataneous panic("interrupt while holding a lock")
again (holding down x key):
kbd overflow
kbd oaaniicloowh
olding locks in scheduler
trap v 33 eip 100F5F c^CNext at t=32166285
(0) [0x0010033e] 0008:0010033e (unk. ctxt): jmp .+0xfffffffe (0x0010033e) ; ebfe
(1) [0x0010005c] 0008:0010005c (unk. ctxt): jmp .+0xfffffffe (0x0010005c) ; ebfe
cpu0 paniced due to holding locks in scheduler
cpu1 got panic("interrupt while holding a lock")
again in lapic_write.
while re-enabling an IRQ?
again:
cpu 0 panic("holding locks in scheduler")
but didn't trigger related panics earlier in scheduler or sched()
of course the panic is right after release() and thus sti()
so we may be seeing an interrupt that left locks held
cpu 1 unknown panic
why does it happen to both cpus at the same time?
again:
cpu 0 panic("holding locks in scheduler")
but trap() didn't see any held locks on return
cpu 1 no apparent panic
again:
cpu 0 panic: holding too many locks in scheduler
cpu 1 panic: kbd_intr returned while holding a lock
again:
cpu 0 panic: holding too man
la 10d70c lr 10027b
those don't seem to be locks...
only place non-constant lock is used is sleep()'s 2nd arg
maybe register not preserved across context switch?
it's in %esi...
sched() doesn't touch %esi
%esi is evidently callee-saved
something to do with interrupts? since ordinarily it works
cpu 1 panic: kbd_int returned while holding a lock
la 107340 lr 107300
console_lock and kbd_lock
maybe console_lock is often not released due to change
in use_console_lock (panic on other cpu)
again:
cpu 0: panic: h...
la 10D78C lr 102CA0
cpu 1: panic: acquire FL_IF (later than cpu 0)
but if sleep() were acquiring random locks, we'd see panics
in release, after sleep() returned.
actually when system is idle, maybe no-one sleeps at all.
just scheduler() and interrupts
questions:
does userfs use pipes? or fork?
no
does anything bad happen if process 1 exits? eg exit() in cat.c
looks ok
are there really no processes left?
lock_init() so we can have a magic number?
HMM maybe the variables at the end of struct cpu are being overwritten
nlocks, lastacquire, lastrelease
by cpu->stack?
adding junk buffers maybe causes crash to take longer...
when do we run on cpu stack?
just in scheduler()?
and interrupts from scheduler()
OH! recursive interrupts will use up any amount of cpu[].stack!
underflow and wrecks *previous* cpu's struct
better buffer cache replacement
read/write of open file that's been unlinked
disk scheduling
mkdir
more than one directory content block
sh arguments
sh redirection
indirect blocks
two bugs in unlink
how come unlink xxx fails? iput problem?