xv6-cs450/lapic.c
2010-07-28 14:38:05 -04:00

170 lines
5.1 KiB
C

// The local APIC manages internal (non-I/O) interrupts.
// See Chapter 8 & Appendix C of Intel processor manual volume 3.
#include "types.h"
#include "defs.h"
#include "traps.h"
#include "mmu.h"
#include "x86.h"
// Local APIC registers, divided by 4 for use as uint[] indices.
#define ID (0x0020/4) // ID
#define VER (0x0030/4) // Version
#define TPR (0x0080/4) // Task Priority
#define EOI (0x00B0/4) // EOI
#define SVR (0x00F0/4) // Spurious Interrupt Vector
#define ENABLE 0x00000100 // Unit Enable
#define ESR (0x0280/4) // Error Status
#define ICRLO (0x0300/4) // Interrupt Command
#define INIT 0x00000500 // INIT/RESET
#define STARTUP 0x00000600 // Startup IPI
#define DELIVS 0x00001000 // Delivery status
#define ASSERT 0x00004000 // Assert interrupt (vs deassert)
#define DEASSERT 0x00000000
#define LEVEL 0x00008000 // Level triggered
#define BCAST 0x00080000 // Send to all APICs, including self.
#define BUSY 0x00001000
#define FIXED 0x00000000
#define ICRHI (0x0310/4) // Interrupt Command [63:32]
#define TIMER (0x0320/4) // Local Vector Table 0 (TIMER)
#define X1 0x0000000B // divide counts by 1
#define PERIODIC 0x00020000 // Periodic
#define PCINT (0x0340/4) // Performance Counter LVT
#define LINT0 (0x0350/4) // Local Vector Table 1 (LINT0)
#define LINT1 (0x0360/4) // Local Vector Table 2 (LINT1)
#define ERROR (0x0370/4) // Local Vector Table 3 (ERROR)
#define MASKED 0x00010000 // Interrupt masked
#define TICR (0x0380/4) // Timer Initial Count
#define TCCR (0x0390/4) // Timer Current Count
#define TDCR (0x03E0/4) // Timer Divide Configuration
volatile uint *lapic; // Initialized in mp.c
static void
lapicw(int index, int value)
{
lapic[index] = value;
lapic[ID]; // wait for write to finish, by reading
}
//PAGEBREAK!
void
lapicinit(int c)
{
cprintf("lapicinit: %d 0x%x\n", c, lapic);
if(!lapic)
return;
// Enable local APIC; set spurious interrupt vector.
lapicw(SVR, ENABLE | (T_IRQ0 + IRQ_SPURIOUS));
// The timer repeatedly counts down at bus frequency
// from lapic[TICR] and then issues an interrupt.
// If xv6 cared more about precise timekeeping,
// TICR would be calibrated using an external time source.
lapicw(TDCR, X1);
lapicw(TIMER, PERIODIC | (T_IRQ0 + IRQ_TIMER));
lapicw(TICR, 10000000);
// Disable logical interrupt lines.
lapicw(LINT0, MASKED);
lapicw(LINT1, MASKED);
// Disable performance counter overflow interrupts
// on machines that provide that interrupt entry.
if(((lapic[VER]>>16) & 0xFF) >= 4)
lapicw(PCINT, MASKED);
// Map error interrupt to IRQ_ERROR.
lapicw(ERROR, T_IRQ0 + IRQ_ERROR);
// Clear error status register (requires back-to-back writes).
lapicw(ESR, 0);
lapicw(ESR, 0);
// Ack any outstanding interrupts.
lapicw(EOI, 0);
// Send an Init Level De-Assert to synchronise arbitration ID's.
lapicw(ICRHI, 0);
lapicw(ICRLO, BCAST | INIT | LEVEL);
while(lapic[ICRLO] & DELIVS)
;
// Enable interrupts on the APIC (but not on the processor).
lapicw(TPR, 0);
}
int
cpunum(void)
{
// Cannot call cpu when interrupts are enabled:
// result not guaranteed to last long enough to be used!
// Would prefer to panic but even printing is chancy here:
// almost everything, including cprintf and panic, calls cpu,
// often indirectly through acquire and release.
if(readeflags()&FL_IF){
static int n;
if(n++ == 0)
cprintf("cpu called from %x with interrupts enabled\n",
__builtin_return_address(0));
}
if(lapic)
return lapic[ID]>>24;
return 0;
}
// Acknowledge interrupt.
void
lapiceoi(void)
{
if(lapic)
lapicw(EOI, 0);
}
// Spin for a given number of microseconds.
// On real hardware would want to tune this dynamically.
void
microdelay(int us)
{
}
#define IO_RTC 0x70
// Start additional processor running bootstrap code at addr.
// See Appendix B of MultiProcessor Specification.
void
lapicstartap(uchar apicid, uint addr)
{
int i;
ushort *wrv;
// "The BSP must initialize CMOS shutdown code to 0AH
// and the warm reset vector (DWORD based at 40:67) to point at
// the AP startup code prior to the [universal startup algorithm]."
outb(IO_RTC, 0xF); // offset 0xF is shutdown code
outb(IO_RTC+1, 0x0A);
wrv = (ushort*)(0x40<<4 | 0x67); // Warm reset vector
wrv[0] = 0;
wrv[1] = addr >> 4;
// "Universal startup algorithm."
// Send INIT (level-triggered) interrupt to reset other CPU.
lapicw(ICRHI, apicid<<24);
lapicw(ICRLO, INIT | LEVEL | ASSERT);
microdelay(200);
lapicw(ICRLO, INIT | LEVEL);
microdelay(100); // should be 10ms, but too slow in Bochs!
// Send startup IPI (twice!) to enter bootstrap code.
// Regular hardware is supposed to only accept a STARTUP
// when it is in the halted state due to an INIT. So the second
// should be ignored, but it is part of the official Intel algorithm.
// Bochs complains about the second one. Too bad for Bochs.
for(i = 0; i < 2; i++){
lapicw(ICRHI, apicid<<24);
lapicw(ICRLO, STARTUP | (addr>>12));
microdelay(200);
}
}