xv6-cs450/picirq.c

81 lines
2.3 KiB
C
Raw Normal View History

2006-06-16 22:29:25 +02:00
/* See COPYRIGHT for copyright information. */
#include "types.h"
#include "x86.h"
#include "traps.h"
2006-06-16 22:29:25 +02:00
#include "defs.h"
// I/O Addresses of the two 8259A programmable interrupt controllers
#define IO_PIC1 0x20 // Master (IRQs 0-7)
#define IO_PIC2 0xA0 // Slave (IRQs 8-15)
#define IRQ_SLAVE 2 // IRQ at which slave connects to master
2006-06-16 22:29:25 +02:00
// Current IRQ mask.
// Initial IRQ mask has interrupt 2 enabled (for slave 8259A).
2006-08-04 20:23:23 +02:00
static ushort irq_mask_8259A = 0xFFFF & ~(1<<IRQ_SLAVE);
static void
irq_setmask_8259A(ushort mask)
{
irq_mask_8259A = mask;
outb(IO_PIC1+1, (char)mask);
outb(IO_PIC2+1, (char)(mask >> 8));
}
2006-06-16 22:29:25 +02:00
/* Initialize the 8259A interrupt controllers. */
void
pic_init(void)
{
// mask all interrupts
outb(IO_PIC1+1, 0xFF);
outb(IO_PIC2+1, 0xFF);
// Set up master (8259A-1)
// ICW1: 0001g0hi
// g: 0 = edge triggering, 1 = level triggering
// h: 0 = cascaded PICs, 1 = master only
// i: 0 = no ICW4, 1 = ICW4 required
outb(IO_PIC1, 0x11);
// ICW2: Vector offset
outb(IO_PIC1+1, IRQ_OFFSET);
// ICW3: bit mask of IR lines connected to slave PICs (master PIC),
// 3-bit No of IR line at which slave connects to master(slave PIC).
outb(IO_PIC1+1, 1<<IRQ_SLAVE);
// ICW4: 000nbmap
// n: 1 = special fully nested mode
// b: 1 = buffered mode
// m: 0 = slave PIC, 1 = master PIC
// (ignored when b is 0, as the master/slave role
// can be hardwired).
// a: 1 = Automatic EOI mode
// p: 0 = MCS-80/85 mode, 1 = intel x86 mode
outb(IO_PIC1+1, 0x3);
// Set up slave (8259A-2)
outb(IO_PIC2, 0x11); // ICW1
outb(IO_PIC2+1, IRQ_OFFSET + 8); // ICW2
outb(IO_PIC2+1, IRQ_SLAVE); // ICW3
// NB Automatic EOI mode doesn't tend to work on the slave.
// Linux source code says it's "to be investigated".
outb(IO_PIC2+1, 0x3); // ICW4
// OCW3: 0ef01prs
// ef: 0x = NOP, 10 = clear specific mask, 11 = set specific mask
// p: 0 = no polling, 1 = polling mode
// rs: 0x = NOP, 10 = read IRR, 11 = read ISR
outb(IO_PIC1, 0x68); /* clear specific mask */
outb(IO_PIC1, 0x0a); /* read IRR by default */
outb(IO_PIC2, 0x68); /* OCW3 */
outb(IO_PIC2, 0x0a); /* OCW3 */
if (irq_mask_8259A != 0xFFFF)
irq_setmask_8259A(irq_mask_8259A);
2006-06-16 22:29:25 +02:00
}