minix/kernel/proc.h
2007-04-23 13:36:38 +00:00

153 lines
5.9 KiB
C
Executable file

#ifndef PROC_H
#define PROC_H
/* Here is the declaration of the process table. It contains all process
* data, including registers, flags, scheduling priority, memory map,
* accounting, message passing (IPC) information, and so on.
*
* Many assembly code routines reference fields in it. The offsets to these
* fields are defined in the assembler include file sconst.h. When changing
* struct proc, be sure to change sconst.h to match.
*/
#include <minix/com.h>
#include "const.h"
#include "priv.h"
struct proc {
struct stackframe_s p_reg; /* process' registers saved in stack frame */
struct segframe p_seg; /* segment descriptors */
proc_nr_t p_nr; /* number of this process (for fast access) */
struct priv *p_priv; /* system privileges structure */
short p_rts_flags; /* process is runnable only if zero */
short p_misc_flags; /* flags that do not suspend the process */
char p_priority; /* current scheduling priority */
char p_max_priority; /* maximum scheduling priority */
char p_ticks_left; /* number of scheduling ticks left */
char p_quantum_size; /* quantum size in ticks */
struct mem_map p_memmap[NR_LOCAL_SEGS]; /* memory map (T, D, S) */
clock_t p_user_time; /* user time in ticks */
clock_t p_sys_time; /* sys time in ticks */
struct proc *p_nextready; /* pointer to next ready process */
struct proc *p_caller_q; /* head of list of procs wishing to send */
struct proc *p_q_link; /* link to next proc wishing to send */
message *p_messbuf; /* pointer to passed message buffer */
int p_getfrom_e; /* from whom does process want to receive? */
int p_sendto_e; /* to whom does process want to send? */
sigset_t p_pending; /* bit map for pending kernel signals */
char p_name[P_NAME_LEN]; /* name of the process, including \0 */
endpoint_t p_endpoint; /* endpoint number, generation-aware */
#if DEBUG_SCHED_CHECK
int p_ready, p_found;
#endif
};
/* Bits for the runtime flags. A process is runnable iff p_rts_flags == 0. */
#define SLOT_FREE 0x01 /* process slot is free */
#define NO_PRIORITY 0x02 /* process has been stopped */
#define SENDING 0x04 /* process blocked trying to send */
#define RECEIVING 0x08 /* process blocked trying to receive */
#define SIGNALED 0x10 /* set when new kernel signal arrives */
#define SIG_PENDING 0x20 /* unready while signal being processed */
#define P_STOP 0x40 /* set when process is being traced */
#define NO_PRIV 0x80 /* keep forked system process from running */
#define NO_ENDPOINT 0x100 /* process cannot send or receive messages */
/* These runtime flags can be tested and manipulated by these macros. */
#define RTS_ISSET(rp, f) (((rp)->p_rts_flags & (f)) == (f))
/* Set flag and dequeue if the process was runnable. */
#define RTS_SET(rp, f) \
do { \
if(!(rp)->p_rts_flags) { dequeue(rp); } \
(rp)->p_rts_flags |= (f); \
} while(0)
/* Clear flag and enqueue if the process was not runnable but is now. */
#define RTS_UNSET(rp, f) \
do { \
int rts; \
rts = (rp)->p_rts_flags; \
(rp)->p_rts_flags &= ~(f); \
if(rts && !(rp)->p_rts_flags) { enqueue(rp); } \
} while(0)
/* Set flag and dequeue if the process was runnable. */
#define RTS_LOCK_SET(rp, f) \
do { \
if(!(rp)->p_rts_flags) { lock_dequeue(rp); } \
(rp)->p_rts_flags |= (f); \
} while(0)
/* Clear flag and enqueue if the process was not runnable but is now. */
#define RTS_LOCK_UNSET(rp, f) \
do { \
int rts; \
rts = (rp)->p_rts_flags; \
(rp)->p_rts_flags &= ~(f); \
if(rts && !(rp)->p_rts_flags) { lock_enqueue(rp); } \
} while(0)
/* Set flags to this value. */
#define RTS_LOCK_SETFLAGS(rp, f) \
do { \
if(!(rp)->p_rts_flags && (f)) { lock_dequeue(rp); } \
(rp)->p_rts_flags = (f); \
} while(0)
/* Misc flags */
#define REPLY_PENDING 0x01 /* reply to IPC_REQUEST is pending */
#define MF_VM 0x08 /* process uses VM */
#define MF_ASYNMSG 0x10 /* Asynchrous message pending */
/* Scheduling priorities for p_priority. Values must start at zero (highest
* priority) and increment. Priorities of the processes in the boot image
* can be set in table.c. IDLE must have a queue for itself, to prevent low
* priority user processes to run round-robin with IDLE.
*/
#define NR_SCHED_QUEUES 16 /* MUST equal minimum priority + 1 */
#define TASK_Q 0 /* highest, used for kernel tasks */
#define MAX_USER_Q 0 /* highest priority for user processes */
#define USER_Q 7 /* default (should correspond to nice 0) */
#define MIN_USER_Q 14 /* minimum priority for user processes */
#define IDLE_Q 15 /* lowest, only IDLE process goes here */
/* Magic process table addresses. */
#define BEG_PROC_ADDR (&proc[0])
#define BEG_USER_ADDR (&proc[NR_TASKS])
#define END_PROC_ADDR (&proc[NR_TASKS + NR_PROCS])
#define NIL_PROC ((struct proc *) 0)
#define NIL_SYS_PROC ((struct proc *) 1)
#define cproc_addr(n) (&(proc + NR_TASKS)[(n)])
#define proc_addr(n) (pproc_addr + NR_TASKS)[(n)]
#define proc_nr(p) ((p)->p_nr)
#define isokprocn(n) ((unsigned) ((n) + NR_TASKS) < NR_PROCS + NR_TASKS)
#define isemptyn(n) isemptyp(proc_addr(n))
#define isemptyp(p) ((p)->p_rts_flags == SLOT_FREE)
#define iskernelp(p) iskerneln((p)->p_nr)
#define iskerneln(n) ((n) < 0)
#define isuserp(p) isusern((p)->p_nr)
#define isusern(n) ((n) >= 0)
/* The process table and pointers to process table slots. The pointers allow
* faster access because now a process entry can be found by indexing the
* pproc_addr array, while accessing an element i requires a multiplication
* with sizeof(struct proc) to determine the address.
*/
EXTERN struct proc proc[NR_TASKS + NR_PROCS]; /* process table */
EXTERN struct proc *pproc_addr[NR_TASKS + NR_PROCS];
EXTERN struct proc *rdy_head[NR_SCHED_QUEUES]; /* ptrs to ready list headers */
EXTERN struct proc *rdy_tail[NR_SCHED_QUEUES]; /* ptrs to ready list tails */
#endif /* PROC_H */