minix/commands/elle/eesite.h
2005-04-21 14:53:53 +00:00

184 lines
6 KiB
C
Executable file
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/* ELLE - Copyright 1984, 1987 by Ken Harrenstien, SRI International
* This software is quasi-public; it may be used freely with
* like software, but may NOT be sold or made part of licensed
* products without permission of the author.
*/
/*
* EESITE.H Site-dependent switches & definitions
*/
/* CONDITIONAL COMPILATION SWITCHES */
#define V6 0 /* Running on V6 system (else V7 assumed) */
#define APOLLO 0 /* Running on an Apollo system */
#define BBN 0 /* Running on BBN system (tty stuff) */
#define BSD4_2 0 /* Running on 4.2BSD system */
#define COHERENT 0 /* Running on Coherent IBM-PC system */
#define DNTTY 0 /* Running on SRI V6 Deafnet system (tty stuff) */
#define HPUX 0 /* Running on Hewlett-Packard System V + */
#define MINIX 1 /* Running on MINIX (IBM-PC) system */
#define ONYX 0 /* Running on ONYX Z8000 system */
#define PCIX 0 /* Running on PC/IX (IBM-PC) system */
#define SUN 0 /* Running on SUN workstation system */
#define SYSV 0 /* Running on Unix System V (or perhaps Sys III) */
#define TOPS20 0 /* Running on TOPS-20 KCC C implementation */
#define UCB 0 /* Running on 2.8, 2.9, or 4.x BSD sys (tty stuff) */
#define VENIX86 0 /* Running on Venix86 (IBM-PC) system */
#define ICONOGRAPHICS 0 /* Using Iconographics configuration version */
#define IMAGEN 0 /* Using Imagen configuration version */
/* Resolve system dependencies */
#if SUN
#undef BSD4_2
#define BSD4_2 1 /* SUN uses 4.2BSD */
#endif
#if BSD4_2
#undef UCB
#define UCB 1 /* 4.2 is special case of general UCB stuff */
#endif /*BSD4_2*/
#if (PCIX || HPUX)
#undef SYSV
#define SYSV 1 /* PC/IX & HP-UX are based on System III & V (resp) */
#endif
/* Set system or site dependent stuff here */
#if V6
#define void int /* May need this for other systems too */
#endif
/* Changes to parameters (elle.h) or variable defaults (e_vinit.c) */
#if COHERENT
#define EVFNO2 0 /* "Old" filename postfix - use no old file! */
#define EVFNN2 "+" /* "New" filename postfix */
#define TX_COHIBM 1 /* Ensure Coherent IBM-PC console support included */
#endif /*COHERENT*/
#if DNTTY
#define EVLLEN 60 /* Short line length for TDDs */
#endif /*DNTTY*/
#if HPUX
#define EVFNO2 "~" /* Same as CCA Emacs. Sorts last in listing. */
#endif /*HPUX*/
#if MINIX
#define EVFNO2 ".bak" /* "Old" filename postfix */
#define EVMARKSHOW "Mark set"
#define EVCCOL (33) /* Use this as Comment Column */
#define EVMVPCT 1 /* 1% - Try to use minimal window repositioning */
#define EVMODWSO 1 /* Use mode window standout if can */
#define STRERROR 1 /* Say that implementation provides strerror() */
#include <sys/types.h>
#include <string.h>
#include <unistd.h>
#include <stdio.h>
#endif /*MINIX*/
#if ONYX
#define STKMEM (4*512) /* ONYX Z8000 seems to have less room avail */
#endif /*ONYX*/
#if BSD4_2
#define FNAMELEN 255 /* Max size of last filename component */
#define FNAMSIZ 400 /* Max size of complete filename */
#endif /*BSD4_2*/
#if TOPS20
#define EVHELPFILE "elle:help.dat" /* T20 ELLE help file */
#define EVPROFBINFILE "ellep.b1" /* T20 binary profile file */
#define EVPROFTEXTFILE "ellep.e" /* T20 ASCII profile file */
#define EVFNO2 0 /* No old filename postfix (T20 has generations) */
#define EVFNN2 0 /* No new filename postfix (T20 has generations) */
#define FNAMELEN (40*3) /* Max size of non-directory filename component */
#define FNAMSIZ (40*5) /* Max size of complete filename */
#define STRERROR 1 /* Say that implementation provides strerror() */
#endif /*TOPS20*/
#if VENIX86
#define TIBFSIZ 1 /* Venix86 block reads in raw mode */
#endif /*VENIX86*/
/* Configuration settings */
#if ICONOGRAPHICS
#define EVFNO2 "@" /* "Old" filename postfix */
#define EVMARKSHOW "Set."
#define PARABLOCK 1 /* Values meaningful only for ICONOGRAPHICS */
#define PARALINE 2
#define TXC_VISBEL 1 /* Use visible bell if possible */
#endif /*ICONOGRAPHICS*/
#if IMAGEN
#define EVFNO2 ".BAK" /* "Old" filename postfix */
#define EVMARKSHOW "Mark set"
#define TOBFSIZ (10*80) /* Size of TTY output buffer */
#define ECHOLINES 2 /* Use 2 echo-area lines, not 1 */
#define MAXARGFILES 10 /* Several startup filename args */
#endif /*IMAGEN*/
/* Now set any defaults for things not already defined */
/* TERMINAL SUPPORT SWITCHES */
/* Only those terminals which have a switch defined here */
/* will be included in ELLE's "hardwired" support. */
/* Switch name: Compiles support for: */
#ifndef TX_TERMCAP
#define TX_TERMCAP 1 /* * - most TERMCAP-defined terminals */
#endif
#ifndef TX_H19
#define TX_H19 1 /* "H19" - Heath/Zenith-19 */
#endif
#ifndef TX_DM2500
#define TX_DM2500 1 /* "DM2500","DM3025" - Datamedia 2500 */
#endif
#ifndef TX_COHIBM
#define TX_COHIBM 0 /* "COHIBM" - Coherent IBM-PC console */
#endif
#ifndef TX_TVI925
#define TX_TVI925 0 /* "TVI925" - TeleVideo 925 */
#endif
#ifndef TX_OM8025
#define TX_OM8025 0 /* "OM8025" - Omron 8025AG */
#endif
#ifndef TXC_VISBEL /* Non-zero if want to use visible bell */
#define TXC_VISBEL 0
#endif
/* Default terminal type string, used if ELLE cannot get type either
** from $TERM or from startup args.
*/
#ifndef TXS_DEFAULT
#define TXS_DEFAULT "H19" /* Default terminal type string */
#endif
/* Combination parameter/switch definitions */
/* STKMEM - System-dependent stack allocation crock, defines amount of
* stack memory to grab for general-purpose use. This is mainly
* useful for PDP-11s or machines with similarly brain-damaged
* address space hardware. A PDP-11 memory segment is 8K bytes,
* or 16 512-byte blocks, and the stack segment quarantines all of
* this space even though the actual stack may only use a miniscule
* portion of it.
*/
/* Use this if compiling for a PDP11 system, otherwise leave undefined.. */
#if (V6 || 0)
#define STKMEM (8*512) /* Use half a PDP11 segment */
#endif
/* These defaults are in eesite.h so ELLEC can get at them too. */
#ifndef EVPROFBINFILE /* Location of binary user profile, relative to HOME */
#define EVPROFBINFILE ".ellepro.b1"
#endif
#ifndef EVPROFTEXTFILE /* Location of ASCII user profile (used by ELLEC) */
#define EVPROFTEXTFILE ".ellepro.e"
#endif