214c4e152b
As part of this, change the "run" script to allow certain scripts to be run as root only. Change-Id: I846e41037f9d4f6c7fc0b5ea8250303a7bd72f5d
68 lines
3.3 KiB
Bash
Executable file
68 lines
3.3 KiB
Bash
Executable file
#!/bin/sh
|
|
|
|
. support.sh
|
|
|
|
# The following commented-out examples of how to run blocktest for certain
|
|
# driver and device pairs. The syntax of the calls is:
|
|
#
|
|
# block_test <device> <parameters>
|
|
#
|
|
# <device> is the path to a device to run blocktest on. This may be a full
|
|
# disk, a partition, or a subpartition. If possible, give blocktest the whole
|
|
# disk; otherwise preferably the first partition with a size of slightly over
|
|
# 8GB (for ATA) (better yet: slightly over 128GB); even fewer tests can be done
|
|
# if you give it only a subpartition.
|
|
#
|
|
# <parameters> is a comma-separated list of parameters for blocktest. The
|
|
# following parameters are supported and in fact expected:
|
|
#
|
|
# rw (or) ro Specifying "rw" will let blocktest write to the target
|
|
# partition. This allows for a lot more tests, but keep in mind
|
|
# that any data on the partition (and, if the driver misbehaves,
|
|
# on other partitions and possibly other disks) WILL BE DESTROYED.
|
|
# Use "ro" for read-only mediums, such as CD-ROMs.
|
|
# sector Sector size, in bytes. This should be 512 for ATA devices, and
|
|
# 2048 for ATAPI devices. The default is 512.
|
|
# min_read Minimum size of a read request. This must be at least 1 and at
|
|
# most the sector size, and the sector size must be divisible by
|
|
# it. A value other than the sector size allows blocktest to test
|
|
# sub-sector reads.
|
|
# min_write Minimum size of a write request. This must be at least 1 and at
|
|
# most the sector size. Sub-sector write support is not common in
|
|
# drivers, and therefore not yet well tested by blocktest. This
|
|
# parameter is optional; if omitted, the sector size is used.
|
|
# element Minimum size of a vector element within a larger I/O request.
|
|
# This must be at least 1 and at most min_read, and min_read must
|
|
# be divisible by this value. The idea is that several small
|
|
# elements may add up to the minimum read size.
|
|
# max Maximum size of any request. This should be a multiple of the
|
|
# sector size. Blocktest will not test what happens when this
|
|
# value is exceeded, but it will generate large requests up to
|
|
# this value. For drivers that do not have a maximum request size,
|
|
# simply use some large value (typically several megabytes).
|
|
#
|
|
# Before commenting out any entry, you MUST edit the device name for that
|
|
# entry, or you WILL risk losing arbitrary data. You may run multiple tests in
|
|
# parallel, on different devices. Note that at_wini has no maximum request
|
|
# size, so an arbitray size is used. Finally, a disclaimer: a buggy device
|
|
# driver may destroy any data it has access to, so use at your own risk.
|
|
|
|
# AT_WINI ATA TEST (for IDE disk devices)
|
|
|
|
#block_test /dev/c0d1 "rw,sector=512,min_read=512,element=2,max=16777216"
|
|
|
|
# AT_WINI ATAPI TEST (for IDE CD-ROM devices)
|
|
|
|
#block_test /dev/c0d2 "ro,sector=2048,min_read=2,element=2,max=16777216"
|
|
|
|
# AHCI ATA TEST (for SATA disk devices)
|
|
|
|
#block_test /dev/c2d0 "rw,sector=512,min_read=2,element=2,max=4194304"
|
|
|
|
# AHCI ATAPI TEST (for SATA CD-ROM devices)
|
|
|
|
#block_test /dev/c2d1 "ro,sector=2048,min_read=2,element=2,max=4194304"
|
|
|
|
# VND TEST (for configured vnode disk devices)
|
|
|
|
#block_test /dev/vnd0 "rw,min_read=1,min_write=1,element=1,max=16777216"
|