minix/commands/httpd0995/README
2006-06-19 14:55:09 +00:00

252 lines
9.3 KiB
Text

httpd documentation 7/16/96 by Michael Temari <Michael@TemWare.Com>
updated 2006-06-01 by Al Woodhull <asw@woodhull.com>
DISCLAIMER:
Use at own risk etc...
COMMENTS:
Please send me any bug reports, comments, questions, etc... My email
address is Michael@TemWare.Com
BACKGROUND:
httpd is a World Wide Web (WWW) server. I wrote it from scratch so
the setup and configuration will not be like other web servers though
hopefully by reading this document there will be no problems in getting
my web server up and running on your Minix system.
COMPILING:
To compile httpd all you need to do is type "make" in the httpd source
directory. There should be no errors or warnings. If you should run
out of memory when compiling try adding the -m option to the CFLAGS
list in the Makefile.
INSTALLING:
To install httpd all you need to do is type "make install" in the httpd
source directory. By default the place to install httpd is into
/usr/local/bin. If you would like to change this then change BINDIR in
the Makefile. Httpd will be linked to in.httpd, which is the preferred
name for a program started by the tcpd internet access control program.
The program dir2html is also installed -- this provides a directory
listing when a web client accesses a directory which does not contain a
file named index.html (or an alternative designated in /etc/httpd.conf).
The man pages are installed by typing "make installman".
CONFIGURING:
Before running httpd it must be configured. The name of the default
configuration file is /etc/httpd.conf or you may pass the configuration
file name to httpd. Upon starting up, httpd will parse the configuration
file and then process requests. This README file and the sample httpd.conf
may also help in configuring. The httpd.conf.5 man page presents the same
information for reference use.
The configuration file is an ascii file which consists of lines of the
following form:
directive LWS [parameters separated by LWS]
NOTE: LWS denotes Linear White Space which is spaces and/or tabs
The following are valid configuration file directives:
serverroot redirect user chroot logfile dbgfile dirsend direxec vhost
auth proxyauth vpath include mtype
To make the file more readable, on directives which occupy multiple
lines you may omit the directive on lines after the first and begin
these lines with LWS.
serverroot path
The serverroot directive sets the translation for // to the given path.
redirect url
If redirect is defined in the configuration file then all request urls
will be redirected. For example, if in the configuration file of
minix1.hampshire.edu this line appears:
redirect http://minix1.woodhull.com/
a request for http://minix1.hampshire.edu/some/page will return a 301 error
which is a redirect permanent to http://minix1.woodhull.com/some/page.
user username
The user directive causes the server to run as the given username, otherwise
the server will run as whoever started it (normally root).
chroot directory
The chroot directive causes the server to chroot to the given directory after
the configuration and log files have been opened. Normally this will be the
home directory of the given username in the user directive.
NOTE: /~user will be translated to the home directory of the given user
// will be translated to the serverroot directory
NOTE: if this directive is used then beware of the consequences.
logfile filename
The logfile directive tells the server where to log http transactions.
NOTE: the file must exist to enable logging
dbgfile filename
The dbgfile directive tells the server where to log debug http transactions.
NOTE: the file must exist to enable logging
dirsend filelist
The dirsend directive tells the server that when a directory is requested
that it should send the first file that it finds in the directory from the
filelist for the request.
direxec program
The direxec directive tells the server that when a directory is requested
and no file is found from the dirsend directive that it should run the
given program.
NOTE: the program normally generates a directory listing on the fly
NOTE: the program access is considered X with no access restrictions.
vhost hostname VhostRoot
vhost is for defining access for virtual hosts. If none are configured then
any host is accepted. If specified then access is only granted for requests
for hosts which are configured here. In the Vpath section below the /// gets
translated to the corresponding VhostRoot.
auth authname authdescription access [passwdfile [users]]
The auth directive sets up different authorizations with the server. The
authname is the name given to the authorization and is case insensitive.
The authdescription is the description of the authorization and is what
the user will see when asked to enter a username and password. The
access is one or more of (rwx). R tells the server the url can be
read. W tells the server the url can be overwritten. X tells the server
that the url can and should be executed. Access is in addition to normal
unix security considerations. For instance a file that can be written to
that does not have the W access will have an error returned. The
passwdfile is the name of the passwdfile to validate users against. If
the passwdfile is given as '.' then the system password file will be used
which is /etc/passwd. If no passwdfile is given then no authorization is
allowed for anyone. If no users are given then any validated users is
authorized, otherwise only the given users are allowed.
proxyauth authname authdescription access [passwdfile [users]]
proxyauth defines any access authorization to be used for Proxy access
authname = Same as auth above
authdescription = Same as auth above
access = Must be R to allow proxy
passwdfile = Same as auth above
users = Same as auth above
vpath from to [auth [access]]
The vpath directive sets up url path translations and authorizations. A
requested url that matches from will be translated to to with the given
auth and access. If auth does not exist then the url will have no access.
If access is not given then the access is taken from the auth record (see
above). A '.' in place of the to means that the server should use a
translation from another vpath record, but associate the given auth and
access with the requested url. A '*' maybe at the end only of the from
which is a wildcard match. For example if the from has /AB* then any of
/ABCDEF or /AB or /ABmichael will match, but /AD or /a will not. The
requested url is first checked against each vpath record until an exact
match (meaning url match from and from had no '*') is found or the end of
the list. Therefore a wildcard match will match the last from is the list
in which it matched.
NOTE: if at the beginning of the to field
/~user will get translated to the home directory of the given user
// wile get translated to the serverroot directory
include filename
The include directive tells the server to read configuration information
from the given filename.
NOTE: normally mtype directives are included from another file
mtype mimetype extensions
The mtype directive tells the server what mimetype to associate with files
which have any of the given extensions. If no match is found then the file
will be treated as application/octet-stream.
NOTE: normally you get mtype directives in included file
USAGE:
httpd [-v|-t] [configuration-file]
The -t tells the server to just parse the configuration file so that you
can test it to see if it is the way you want it. You may also pass the
name of your configuration file if it is not the default /etc/httpd.conf.
The -v option prints the server version and then exits.
STARTING:
First of all httpd is a server and therefore you will need to start it
with tcpd. Tcpd is a program which listens for incoming TCP connections
on the passed port and when a connection comes in it forks and starts the
given daemon program. Therefore to start httpd you use:
tcpd http /usr/local/bin/in.httpd &
You will more than likely have this line in your /etc/rc or /etc/rc.net
file so that whenever your system is restarted the web server will also
be started. The first parameter http is the port that tcpd is going
to be listening for connections on. Here http (which should be defined
in /etc/services as 80) is the standard port for a web server. The second
parameter is the program that tcpd will fork and exec when a connection
comes in. The program will then have its stdin and stderr connected to
the client Then the web server program will start running with the tcpd
program waiting for the next connection. Currently there is no ability to
limit the number of simultaneous web servers running. NOTE: At some point
I will be adding the ability for httpd to start itself without the need of
tcpd. That way httpd will already be in memory and have parsed its
configuration file.
In Minix 2.0.3 and later versions you may use:
daemonize tcpd http /usr/local/bin/in.httpd
(daemonize is a shell function defined in /usr/etc/rc which starts programs
as daemons).
FINAL WORDS
I wanted to get the server out as soon as possible so I hurried up and
created this document to help out. Hopefully it will HELP more than
it HURTS. If anyone is interested in writing man pages for httpd or any
of the other network programs please let me know.
Michael Temari
Michael@TemWare.Com
Please note also the SECURITY document in this directory. (asw 2003-07-05)