minix/kernel/arch/i386/system.c
Tomas Hruby ebbce7507b Complete ovehaul of mode switching code
- after a trap to kernel, the code automatically switches to kernel
  stack, in the future local to the CPU

- k_reenter variable replaced by a test whether the CS is kernel cs or
  not. The information is passed further if needed. Removes a global
  variable which would need to be cpu local

- no need for global variables describing the exception or trap
  context. This information is kept on stack and a pointer to this
  structure is passed to the C code as a single structure

- removed loadedcr3 variable and its use replaced by reading the %cr3
  register

- no need to redisable interrupts in restart() as they are already
  disabled.

- unified handling of traps that push and don't push errorcode

- removed save() function as the process context is not saved directly
  to process table but saved as required by the trap code. Essentially
  it means that save() code is inlined everywhere not only in the
  exception handling routine

- returning from syscall is more arch independent - it sets the retger
  in C

- top of the x86 stack contains the current CPU id and pointer to the
  currently scheduled process (the one right interrupted) so the mode
  switch code can find where to save the context without need to use
  proc_ptr which will be cpu local in the future and therefore
  difficult to access in assembler and expensive to access in general

- some more clean up of level0 code. No need to read-back the argument
  passed in
  %eax from the proc structure. The mode switch code does not clobber
  %the general registers and hence we can just call what is in %eax

- many assebly macros in sconst.h as they will be reused by the apic
  assembly
2009-11-06 09:08:26 +00:00

419 lines
8.8 KiB
C

/* system dependent functions for use inside the whole kernel. */
#include "../../kernel.h"
#include <unistd.h>
#include <ctype.h>
#include <string.h>
#include <ibm/cmos.h>
#include <ibm/bios.h>
#include <minix/portio.h>
#include <minix/u64.h>
#include <minix/sysutil.h>
#include <a.out.h>
#include "proto.h"
#include "../../proc.h"
#include "../../debug.h"
#define CR0_EM 0x0004 /* set to enable trap on any FP instruction */
FORWARD _PROTOTYPE( void ser_debug, (int c));
PUBLIC void arch_monitor(void)
{
level0(monitor);
}
PUBLIC void arch_shutdown(int how)
{
/* Mask all interrupts, including the clock. */
outb( INT_CTLMASK, ~0);
if(minix_panicing) {
/* We're panicing? Then retrieve and decode currently
* loaded segment selectors.
*/
printseg("cs: ", 1, proc_ptr, read_cs());
printseg("ds: ", 0, proc_ptr, read_ds());
if(read_ds() != read_ss()) {
printseg("ss: ", 0, NULL, read_ss());
}
}
if(how != RBT_RESET) {
/* return to boot monitor */
outb( INT_CTLMASK, 0);
outb( INT2_CTLMASK, 0);
/* Return to the boot monitor. Set
* the program if not already done.
*/
if (how != RBT_MONITOR)
arch_set_params("", 1);
if(minix_panicing) {
int source, dest;
static char mybuffer[sizeof(params_buffer)];
char *lead = "echo \\n*** kernel messages:\\n";
int leadlen = strlen(lead);
strcpy(mybuffer, lead);
#define DECSOURCE source = (source - 1 + _KMESS_BUF_SIZE) % _KMESS_BUF_SIZE
dest = sizeof(mybuffer)-1;
mybuffer[dest--] = '\0';
source = kmess.km_next;
DECSOURCE;
while(dest >= leadlen) {
char c = kmess.km_buf[source];
if(c == '\n') {
mybuffer[dest--] = 'n';
mybuffer[dest] = '\\';
} else if(isprint(c) &&
c != '\'' && c != '"' &&
c != '\\' && c != ';') {
mybuffer[dest] = c;
} else mybuffer[dest] = ' ';
DECSOURCE;
dest--;
}
arch_set_params(mybuffer, strlen(mybuffer)+1);
}
arch_monitor();
} else {
/* Reset the system by forcing a processor shutdown. First stop
* the BIOS memory test by setting a soft reset flag.
*/
u16_t magic = STOP_MEM_CHECK;
phys_copy(vir2phys(&magic), SOFT_RESET_FLAG_ADDR,
SOFT_RESET_FLAG_SIZE);
level0(reset);
}
}
/* address of a.out headers, set in mpx386.s */
phys_bytes aout;
PUBLIC void arch_get_aout_headers(int i, struct exec *h)
{
/* The bootstrap loader created an array of the a.out headers at
* absolute address 'aout'. Get one element to h.
*/
phys_copy(aout + i * A_MINHDR, vir2phys(h), (phys_bytes) A_MINHDR);
}
PUBLIC void tss_init(struct tss_s * tss, void * kernel_stack, unsigned cpu)
{
/*
* make space for process pointer and cpu id and point to the first
* usable word
*/
tss->sp0 = ((unsigned) kernel_stack) - 2 * sizeof(void *);
tss->ss0 = DS_SELECTOR;
/*
* set the cpu id at the top of the stack so we know on which cpu is
* this stak in use when we trap to kernel
*/
*((reg_t *)(tss->sp0 + 1 * sizeof(reg_t))) = cpu;
}
PUBLIC void arch_init(void)
{
idt_init();
tss_init(&tss, &k_boot_stktop, 0);
#if 0
/* Set CR0_EM until we get FP context switching */
write_cr0(read_cr0() | CR0_EM);
#endif
}
#define COM1_BASE 0x3F8
#define COM1_THR (COM1_BASE + 0)
#define COM1_RBR (COM1_BASE + 0)
#define COM1_LSR (COM1_BASE + 5)
#define LSR_DR 0x01
#define LSR_THRE 0x20
PUBLIC void ser_putc(char c)
{
int i;
int lsr, thr;
lsr= COM1_LSR;
thr= COM1_THR;
for (i= 0; i<100000; i++)
{
if (inb( lsr) & LSR_THRE)
break;
}
outb( thr, c);
}
/*===========================================================================*
* do_ser_debug *
*===========================================================================*/
PUBLIC void do_ser_debug()
{
u8_t c, lsr;
lsr= inb(COM1_LSR);
if (!(lsr & LSR_DR))
return;
c = inb(COM1_RBR);
ser_debug(c);
}
PRIVATE void ser_dump_queues(void)
{
int q;
for(q = 0; q < NR_SCHED_QUEUES; q++) {
struct proc *p;
if(rdy_head[q])
printf("%2d: ", q);
for(p = rdy_head[q]; p; p = p->p_nextready) {
printf("%s / %d ", p->p_name, p->p_endpoint);
}
printf("\n");
}
}
PRIVATE void ser_dump_segs(void)
{
struct proc *pp;
for (pp= BEG_PROC_ADDR; pp < END_PROC_ADDR; pp++)
{
if (pp->p_rts_flags & SLOT_FREE)
continue;
kprintf("%d: %s ep %d\n", proc_nr(pp), pp->p_name, pp->p_endpoint);
printseg("cs: ", 1, pp, pp->p_reg.cs);
printseg("ds: ", 0, pp, pp->p_reg.ds);
if(pp->p_reg.ss != pp->p_reg.ds) {
printseg("ss: ", 0, pp, pp->p_reg.ss);
}
}
}
PRIVATE void ser_debug(int c)
{
int u = 0;
do_serial_debug++;
/* Disable interrupts so that we get a consistent state. */
if(!intr_disabled()) { lock; u = 1; };
switch(c)
{
case '1':
ser_dump_proc();
break;
case '2':
ser_dump_queues();
break;
case '3':
ser_dump_segs();
break;
#if DEBUG_TRACE
#define TOGGLECASE(ch, flag) \
case ch: { \
if(verboseflags & flag) { \
verboseflags &= ~flag; \
printf("%s disabled\n", #flag); \
} else { \
verboseflags |= flag; \
printf("%s enabled\n", #flag); \
} \
break; \
}
TOGGLECASE('8', VF_SCHEDULING)
TOGGLECASE('9', VF_PICKPROC)
#endif
}
do_serial_debug--;
if(u) { unlock; }
}
PRIVATE void printslot(struct proc *pp, int level)
{
struct proc *depproc = NULL;
int dep = NONE;
#define COL { int i; for(i = 0; i < level; i++) printf("> "); }
if(level >= NR_PROCS) {
kprintf("loop??\n");
return;
}
COL
kprintf("%d: %s %d prio %d/%d time %d/%d cr3 0x%lx rts %s misc %s",
proc_nr(pp), pp->p_name, pp->p_endpoint,
pp->p_priority, pp->p_max_priority, pp->p_user_time,
pp->p_sys_time, pp->p_seg.p_cr3,
rtsflagstr(pp->p_rts_flags), miscflagstr(pp->p_misc_flags));
if(pp->p_rts_flags & SENDING) {
dep = pp->p_sendto_e;
kprintf(" to: ");
} else if(pp->p_rts_flags & RECEIVING) {
dep = pp->p_getfrom_e;
kprintf(" from: ");
}
if(dep != NONE) {
if(dep == ANY) {
kprintf(" ANY\n");
} else {
int procno;
if(!isokendpt(dep, &procno)) {
kprintf(" ??? %d\n", dep);
} else {
depproc = proc_addr(procno);
if(depproc->p_rts_flags & SLOT_FREE) {
kprintf(" empty slot %d???\n", procno);
depproc = NULL;
} else {
kprintf(" %s\n", depproc->p_name);
}
}
}
} else {
kprintf("\n");
}
COL
proc_stacktrace(pp);
if(depproc)
printslot(depproc, level+1);
}
PUBLIC void ser_dump_proc()
{
struct proc *pp;
for (pp= BEG_PROC_ADDR; pp < END_PROC_ADDR; pp++)
{
if (pp->p_rts_flags & SLOT_FREE)
continue;
printslot(pp, 0);
}
}
#if SPROFILE
PUBLIC int arch_init_profile_clock(u32_t freq)
{
int r;
/* Set CMOS timer frequency. */
outb(RTC_INDEX, RTC_REG_A);
outb(RTC_IO, RTC_A_DV_OK | freq);
/* Enable CMOS timer interrupts. */
outb(RTC_INDEX, RTC_REG_B);
r = inb(RTC_IO);
outb(RTC_INDEX, RTC_REG_B);
outb(RTC_IO, r | RTC_B_PIE);
/* Mandatory read of CMOS register to enable timer interrupts. */
outb(RTC_INDEX, RTC_REG_C);
inb(RTC_IO);
return CMOS_CLOCK_IRQ;
}
PUBLIC void arch_stop_profile_clock(void)
{
int r;
/* Disable CMOS timer interrupts. */
outb(RTC_INDEX, RTC_REG_B);
r = inb(RTC_IO);
outb(RTC_INDEX, RTC_REG_B);
outb(RTC_IO, r & ~RTC_B_PIE);
}
PUBLIC void arch_ack_profile_clock(void)
{
/* Mandatory read of CMOS register to re-enable timer interrupts. */
outb(RTC_INDEX, RTC_REG_C);
inb(RTC_IO);
}
#endif
#define COLOR_BASE 0xB8000L
PUBLIC void cons_setc(int pos, int c)
{
char ch;
ch= c;
phys_copy(vir2phys((vir_bytes)&ch), COLOR_BASE+(20*80+pos)*2, 1);
}
PUBLIC void cons_seth(int pos, int n)
{
n &= 0xf;
if (n < 10)
cons_setc(pos, '0'+n);
else
cons_setc(pos, 'A'+(n-10));
}
/* Saved by mpx386.s into these variables. */
u32_t params_size, params_offset, mon_ds;
PUBLIC int arch_get_params(char *params, int maxsize)
{
phys_copy(seg2phys(mon_ds) + params_offset, vir2phys(params),
MIN(maxsize, params_size));
params[maxsize-1] = '\0';
return OK;
}
PUBLIC int arch_set_params(char *params, int size)
{
if(size > params_size)
return E2BIG;
phys_copy(vir2phys(params), seg2phys(mon_ds) + params_offset, size);
return OK;
}
PUBLIC void arch_do_syscall(struct proc *proc)
{
/* Perform a previously postponed system call.
*/
int call_nr, src_dst_e;
message *m_ptr;
long bit_map;
/* Get the system call parameters from their respective registers. */
call_nr = proc->p_reg.cx;
src_dst_e = proc->p_reg.retreg;
m_ptr = (message *) proc->p_reg.bx;
bit_map = proc->p_reg.dx;
/* sys_call() expects the given process's memory to be accessible. */
vm_set_cr3(proc);
/* Make the system call, for real this time. */
proc->p_reg.retreg = sys_call(call_nr, src_dst_e, m_ptr, bit_map);
}
PUBLIC struct proc * arch_finish_schedcheck(void)
{
char * stk;
stk = (char *)tss.sp0;
/* set pointer to the process to run on the stack */
*((reg_t *)stk) = (reg_t) proc_ptr;
return proc_ptr;
}