sanchayanmaity/minix
1
0
Fork 0
Code Issues Pull requests Packages Projects Releases Wiki Activity
minix/kernel/arch/i386/klib386.S
Tomas Hruby ebbce7507b Complete ovehaul of mode switching code 
- after a trap to kernel, the code automatically switches to kernel
  stack, in the future local to the CPU

- k_reenter variable replaced by a test whether the CS is kernel cs or
  not. The information is passed further if needed. Removes a global
  variable which would need to be cpu local

- no need for global variables describing the exception or trap
  context. This information is kept on stack and a pointer to this
  structure is passed to the C code as a single structure

- removed loadedcr3 variable and its use replaced by reading the %cr3
  register

- no need to redisable interrupts in restart() as they are already
  disabled.

- unified handling of traps that push and don't push errorcode

- removed save() function as the process context is not saved directly
  to process table but saved as required by the trap code. Essentially
  it means that save() code is inlined everywhere not only in the
  exception handling routine

- returning from syscall is more arch independent - it sets the retger
  in C

- top of the x86 stack contains the current CPU id and pointer to the
  currently scheduled process (the one right interrupted) so the mode
  switch code can find where to save the context without need to use
  proc_ptr which will be cpu local in the future and therefore
  difficult to access in assembler and expensive to access in general

- some more clean up of level0 code. No need to read-back the argument
  passed in
  %eax from the proc structure. The mode switch code does not clobber
  %the general registers and hence we can just call what is in %eax

- many assebly macros in sconst.h as they will be reused by the apic
  assembly
2009-11-06 09:08:26 +00:00

579 lines
14 KiB
ArmAsm
Raw Blame History

/* sections */
.text; .data; .data; .bss
#include <minix/config.h>
#include <minix/const.h>
#include <ibm/interrupt.h>
#include <archconst.h>
#include "../../const.h"
#include "sconst.h"
/*
* This file contains a number of assembly code utility routines needed by the
* kernel. They are:
*/
.globl monitor /* exit Minix and return to the monitor */
.globl int86 /* let the monitor make an 8086 interrupt call */
.globl exit /* dummy for library routines */
.globl _exit /* dummy for library routines */
.globl __exit /* dummy for library routines */
.globl __main /* dummy for GCC */
.globl phys_insw /* transfer data from (disk controller) port to memory */
.globl phys_insb /* likewise byte by byte */
.globl phys_outsw /* transfer data from memory to (disk controller) port */
.globl phys_outsb /* likewise byte by byte */
.globl phys_copy /* copy data from anywhere to anywhere in memory */
.globl phys_copy_fault /* phys_copy pagefault */
.globl phys_copy_fault_in_kernel /* phys_copy pagefault in kernel */
.globl phys_memset /* write pattern anywhere in memory */
.globl mem_rdw /* copy one word from [segment:offset] */
.globl reset /* reset the system */
.globl idle_task /* task executed when there is no work */
.globl level0 /* call a function at level 0 */
.globl read_cpu_flags /* read the cpu flags */
.globl read_cr0 /* read cr0 */
.globl read_cr2 /* read cr2 */
.globl getcr3val
.globl write_cr0 /* write a value in cr0 */
.globl read_cr4
.globl thecr3
.globl write_cr4
.globl catch_pagefaults
.globl read_ds
.globl read_cs
.globl read_ss
/*
* The routines only guarantee to preserve the registers the C compiler
* expects to be preserved (ebx, esi, edi, ebp, esp, segment registers, and
* direction bit in the flags).
*/
.text
/*===========================================================================*/
/* monitor */
/*===========================================================================*/
/* PUBLIC void monitor(); */
/* Return to the monitor. */
monitor:
movl mon_sp, %esp /* restore monitor stack pointer */
movw $SS_SELECTOR, %dx /* monitor data segment */
mov %dx, %ds
mov %dx, %es
mov %dx, %fs
mov %dx, %gs
mov %dx, %ss
pop %edi
pop %esi
pop %ebp
lretw /* return to the monitor */
/*===========================================================================*/
/* int86 */
/*===========================================================================*/
/* PUBLIC void int86(); */
int86:
cmpb $0, mon_return /* is the monitor there? */
jne 0f
movb $0x01, %ah /* an int 13 error seems appropriate */
movb %ah, reg86+0 /* reg86.w.f = 1 (set carry flag) */
movb %ah, reg86+13 /* reg86.b.ah = 0x01 = "invalid command" */
ret
0:
push %ebp /* save C registers */
push %esi
push %edi
push %ebx
pushf /* save flags */
cli /* no interruptions */
inb $INT2_CTLMASK
movb %al, %ah
inb $INT_CTLMASK
push %eax /* save interrupt masks */
movl irq_use, %eax /* map of in-use IRQ's */
and $~(1<<CLOCK_IRQ), %eax /* keep the clock ticking */
outb $INT_CTLMASK /* enable all unused IRQ's and vv. */
movb %ah, %al
outb $INT2_CTLMASK
mov $SS_SELECTOR, %eax /* monitor data segment */
mov %ax, %ss
xchgl mon_sp, %esp /* switch stacks */
push reg86+36 /* parameters used in INT call */
push reg86+32
push reg86+28
push reg86+24
push reg86+20
push reg86+16
push reg86+12
push reg86+8
push reg86+4
push reg86+0
mov %ax, %ds /* remaining data selectors */
mov %ax, %es
mov %ax, %fs
mov %ax, %gs
push %cs
push $return /* kernel return address and selector */
ljmpw *20+2*4+10*4+2*4(%esp)
return:
pop reg86+0
pop reg86+4
pop reg86+8
pop reg86+12
pop reg86+16
pop reg86+20
pop reg86+24
pop reg86+28
pop reg86+32
pop reg86+36
lgdt gdt+GDT_SELECTOR /* reload global descriptor table */
ljmp $CS_SELECTOR, $csinit
csinit:
mov $DS_SELECTOR, %eax
mov %ax, %ds
mov %ax, %es
mov %ax, %fs
mov %ax, %gs
mov %ax, %ss
xchgl mon_sp, %esp /* unswitch stacks */
lidt gdt+IDT_SELECTOR /* reload interrupt descriptor table */
andb $~0x02, gdt+TSS_SELECTOR+DESC_ACCESS /* clear TSS busy bit */
mov $TSS_SELECTOR, %eax
ltr %ax /* set TSS register */
pop %eax
outb $INT_CTLMASK /* restore interrupt masks */
movb %ah, %al
outb $INT2_CTLMASK
addl %ecx, lost_ticks /* record lost clock ticks */
popf /* restore flags */
pop %ebx /* restore C registers */
pop %edi
pop %esi
pop %ebp
ret
/*===========================================================================*/
/* exit */
/*===========================================================================*/
/*
* PUBLIC void exit();
* Some library routines use exit, so provide a dummy version.
* Actual calls to exit cannot occur in the kernel.
* GNU CC likes to call ___main from main() for nonobvious reasons.
*/
exit:
_exit:
__exit:
sti
jmp __exit
__main:
ret
/*===========================================================================*/
/* phys_insw */
/*===========================================================================*/
/*
* PUBLIC void phys_insw(Port_t port, phys_bytes buf, size_t count);
* Input an array from an I/O port. Absolute address version of insw().
*/
phys_insw:
push %ebp
mov %esp, %ebp
cld
push %edi
push %es
mov $FLAT_DS_SELECTOR, %ecx
mov %cx, %es
mov 8(%ebp), %edx /* port to read from */
mov 12(%ebp), %edi /* destination addr */
mov 16(%ebp), %ecx /* byte count */
shr $1, %ecx /* word count */
rep insw /* input many words */
pop %es
pop %edi
pop %ebp
ret
/*===========================================================================*/
/* phys_insb */
/*===========================================================================*/
/*
* PUBLIC void phys_insb(Port_t port, phys_bytes buf, size_t count);
* Input an array from an I/O port. Absolute address version of insb().
*/
phys_insb:
push %ebp
mov %esp, %ebp
cld
push %edi
push %es
mov $FLAT_DS_SELECTOR, %ecx
mov %cx, %es
mov 8(%ebp), %edx /* port to read from */
mov 12(%ebp), %edi /* destination addr */
mov 16(%ebp), %ecx /* byte count */
rep insb /* input many bytes */
pop %es
pop %edi
pop %ebp
ret
/*===========================================================================*/
/* phys_outsw */
/*===========================================================================*/
/*
* PUBLIC void phys_outsw(Port_t port, phys_bytes buf, size_t count);
* Output an array to an I/O port. Absolute address version of outsw().
*/
.balign 16
phys_outsw:
push %ebp
mov %esp, %ebp
cld
push %esi
push %ds
mov $FLAT_DS_SELECTOR, %ecx
mov %cx, %ds
mov 8(%ebp), %edx /* port to write to */
mov 12(%ebp), %esi /* source addr */
mov 16(%ebp), %ecx /* byte count */
shr $1, %ecx /* word count */
rep outsw /* output many words */
pop %ds
pop %esi
pop %ebp
ret
/*===========================================================================*/
/* phys_outsb */
/*===========================================================================*/
/*
* PUBLIC void phys_outsb(Port_t port, phys_bytes buf, size_t count);
* Output an array to an I/O port. Absolute address version of outsb().
*/
.balign 16
phys_outsb:
push %ebp
mov %esp, %ebp
cld
push %esi
push %ds
mov $FLAT_DS_SELECTOR, %ecx
mov %cx, %ds
mov 8(%ebp), %edx /* port to write to */
mov 12(%ebp), %esi /* source addr */
mov 16(%ebp), %ecx /* byte count */
rep outsb /* output many bytes */
pop %ds
pop %esi
pop %ebp
ret
/*===========================================================================*/
/* phys_copy */
/*===========================================================================*/
/*
* PUBLIC phys_bytes phys_copy(phys_bytes source, phys_bytes destination,
* phys_bytes bytecount);
* Copy a block of physical memory.
*/
PC_ARGS = 4+4+4+4 /* 4 + 4 + 4 */
/* es edi esi eip src dst len */
.balign 16
phys_copy:
cld
push %esi
push %edi
push %es
mov $FLAT_DS_SELECTOR, %eax
mov %ax, %es
mov PC_ARGS(%esp), %esi
mov PC_ARGS+4(%esp), %edi
mov PC_ARGS+4+4(%esp), %eax
cmp $10, %eax /* avoid align overhead for small counts */
jb pc_small
mov %esi, %ecx /* align source, hope target is too */
neg %ecx
and $3, %ecx /* count for alignment */
sub %ecx, %eax
rep movsb %es:(%esi), %es:(%edi)
mov %eax, %ecx
shr $2, %ecx /* count of dwords */
rep movsl %es:(%esi), %es:(%edi)
and $3, %eax
pc_small:
xchg %eax, %ecx /* remainder */
rep movsb %es:(%esi), %es:(%edi)
mov $0, %eax /* 0 means: no fault */
phys_copy_fault: /* kernel can send us here */
pop %es
pop %edi
pop %esi
ret
phys_copy_fault_in_kernel: /* kernel can send us here */
pop %es
pop %edi
pop %esi
mov %cr2, %eax
ret
/*===========================================================================*/
/* phys_memset */
/*===========================================================================*/
/*
* PUBLIC void phys_memset(phys_bytes source, unsigned long pattern,
* phys_bytes bytecount);
* Fill a block of physical memory with pattern.
*/
.balign 16
phys_memset:
push %ebp
mov %esp, %ebp
push %esi
push %ebx
push %ds
mov 8(%ebp), %esi
mov 16(%ebp), %eax
mov $FLAT_DS_SELECTOR, %ebx
mov %bx, %ds
mov 12(%ebp), %ebx
shr $2, %eax
fill_start:
mov %ebx, (%esi)
add $4, %esi
dec %eax
jne fill_start
/* Any remaining bytes? */
mov 16(%ebp), %eax
and $3, %eax
remain_fill:
cmp $0, %eax
je fill_done
movb 12(%ebp), %bl
movb %bl, (%esi)
add $1, %esi
inc %ebp
dec %eax
jmp remain_fill
fill_done:
pop %ds
pop %ebx
pop %esi
pop %ebp
ret
/*===========================================================================*/
/* mem_rdw */
/*===========================================================================*/
/*
* PUBLIC u16_t mem_rdw(U16_t segment, u16_t *offset);
* Load and return word at far pointer segment:offset.
*/
.balign 16
mem_rdw:
mov %ds, %cx
mov 4(%esp), %ds
mov 4+4(%esp), %eax /* offset */
movzwl (%eax), %eax /* word to return */
mov %cx, %ds
ret
/*===========================================================================*/
/* reset */
/*===========================================================================*/
/*
* PUBLIC void reset();
* Reset the system by loading IDT with offset 0 and interrupting.
*/
reset:
lidt idt_zero
int $3 /* anything goes, the 386 will not like it */
.data
idt_zero:
.long 0, 0
.text
/*===========================================================================*/
/* idle_task */
/*===========================================================================*/
idle_task:
/*
* This task is called when the system has nothing else to do. The HLT
* instruction puts the processor in a state where it draws minimum power.
*/
push $halt
call level0 /* level0(halt) */
add $4, %esp
jmp idle_task
halt:
sti
hlt
cli
ret
/*===========================================================================*/
/* level0 */
/*===========================================================================*/
/*
* PUBLIC void level0(void (*func)(void))
* Call a function at permission level 0. This allows kernel tasks to do
* things that are only possible at the most privileged CPU level.
*/
level0:
/* check whether we are already running in kernel, the kernel cs
* selector has 3 lower bits zeroed */
mov %cs, %ax
cmpw $CS_SELECTOR, %ax
jne 0f
/* call the function directly as if it was a normal function call */
mov 4(%esp), %eax
call *%eax
ret
/* if not runnig in the kernel yet, trap to kernel */
0:
mov 4(%esp), %eax
int $LEVEL0_VECTOR
ret
/*===========================================================================*/
/* read_flags */
/*===========================================================================*/
/*
* PUBLIC unsigned long read_cpu_flags(void);
* Read CPU status flags from C.
*/
.balign 16
read_cpu_flags:
pushf
mov (%esp), %eax
popf
ret
read_ds:
mov $0, %eax
mov %ds, %ax
ret
read_cs:
mov $0, %eax
mov %cs, %ax
ret
read_ss:
mov $0, %eax
mov %ss, %ax
ret
/*===========================================================================*/
/* read_cr0 */
/*===========================================================================*/
/* PUBLIC unsigned long read_cr0(void); */
read_cr0:
push %ebp
mov %esp, %ebp
mov %cr0, %eax
pop %ebp
ret
/*===========================================================================*/
/* write_cr0 */
/*===========================================================================*/
/* PUBLIC void write_cr0(unsigned long value); */
write_cr0:
push %ebp
mov %esp, %ebp
mov 8(%ebp), %eax
mov %eax, %cr0
jmp 0f /* A jump is required for some flags */
0:
pop %ebp
ret
/*===========================================================================*/
/* read_cr2 */
/*===========================================================================*/
/* PUBLIC reg_t read_cr2(void); */
read_cr2:
mov %cr2, %eax
ret
/*===========================================================================*/
/* read_cr4 */
/*===========================================================================*/
/* PUBLIC unsigned long read_cr4(void); */
read_cr4:
push %ebp
mov %esp, %ebp
mov %cr4, %eax
pop %ebp
ret
/*===========================================================================*/
/* write_cr4 */
/*===========================================================================*/
/* PUBLIC void write_cr4(unsigned long value); */
write_cr4:
push %ebp
mov %esp, %ebp
mov 8(%ebp), %eax
mov %eax, %cr4
jmp 0f
0:
pop %ebp
ret
/*===========================================================================*/
/* getcr3val */
/*===========================================================================*/
/* PUBLIC unsigned long getcr3val(void); */
getcr3val:
mov %cr3, %eax
mov %eax, thecr3
ret
Reference in a new issue View git blame Copy permalink