minix/kernel/const.h
Jorrit Herder f2a85e58d9 Various updates.
* Removed some variants of the SYS_GETINFO calls from the kernel;
  replaced them with new PM and utils libary functionality. Fixed
  bugs in utils library that used old get_kenv() variant.
* Implemented a buffer in the kernel to gather random data.
  Memory driver periodically checks this for /dev/random.
  A better random algorithm can now be implemented in the driver.
  Removed SYS_RANDOM; the SYS_GETINFO call is used instead.
* Remove SYS_KMALLOC from the kernel. Memory allocation can now
  be done at the process manager with new 'other' library functions.
2005-06-03 13:55:06 +00:00

95 lines
3.3 KiB
C
Executable file

/* General constants used by the kernel. */
#include <ibm/interrupt.h> /* interrupt numbers and hardware vectors */
#include <ibm/ports.h> /* port addresses and magic numbers */
#include <ibm/bios.h> /* BIOS addresses, sizes and magic numbers */
#include <minix/config.h>
/* To translate an address in kernel space to a physical address. This is
* the same as umap_local(proc_ptr, D, vir, sizeof(*vir)), but less costly.
*/
#define vir2phys(vir) (kinfo.data_base + (vir_bytes) (vir))
/* Constants used in virtual_copy(). Values must be 0 and 1, respectively! */
#define _SRC_ 0
#define _DST_ 1
/* Translate a pointer to a field in a structure to a pointer to the structure
* itself. So it translates '&struct_ptr->field' back to 'struct_ptr'.
*/
#define structof(type, field, ptr) \
((type *) (((char *) (ptr)) - offsetof(type, field)))
/* How many bytes for the kernel stack. Space allocated in mpx.s. */
#define K_STACK_BYTES 1024
/* How long should the process names be in the kernel? */
#define P_NAME_LEN 8
/* How many bytes should the circular buffer for kernel diagnostics. */
#define KMESS_BUF_SIZE 256
/* Maximum size in bytes for (port,value)-pairs vector to copy in. */
#define VDEVIO_BUF_SIZE 64
/* How many elements in vector of virtual copy requests. */
#define VCOPY_VEC_SIZE 16
/* How many IRQ hooks are there in total. */
#define NR_IRQ_HOOKS 16
/* How many buffers for notification messages should there be? */
#define NR_NOTIFY_BUFS 32
/* Buffer to gather randomness. How many entries before wrapping? */
#define RANDOM_ELEMENTS 32
/* Constants and macros for bit map manipulation. */
#define BITCHUNK_BITS (sizeof(bitchunk_t) * CHAR_BIT)
#define BITMAP_CHUNKS(nr_bits) (((nr_bits)+BITCHUNK_BITS-1)/BITCHUNK_BITS)
#define MAP_CHUNK(map,bit) (map)[((bit)/BITCHUNK_BITS)]
#define CHUNK_OFFSET(bit) ((bit)%BITCHUNK_BITS))
#define GET_BIT(map,bit) ( MAP_CHUNK(map,bit) & (1 << CHUNK_OFFSET(bit) )
#define SET_BIT(map,bit) ( MAP_CHUNK(map,bit) |= (1 << CHUNK_OFFSET(bit) )
#define UNSET_BIT(map,bit) ( MAP_CHUNK(map,bit) &= ~(1 << CHUNK_OFFSET(bit) )
#if (CHIP == INTEL)
/* Program stack words and masks. */
#define INIT_PSW 0x0200 /* initial psw */
#define INIT_TASK_PSW 0x1200 /* initial psw for tasks (with IOPL 1) */
#define TRACEBIT 0x0100 /* OR this with psw in proc[] for tracing */
#define SETPSW(rp, new) /* permits only certain bits to be set */ \
((rp)->p_reg.psw = (rp)->p_reg.psw & ~0xCD5 | (new) & 0xCD5)
#define IF_MASK 0x00000200
#define IOPL_MASK 0x003000
#if ENABLE_LOCK_TIMING
#define locktimestart(c, v) timer_start(c, v)
#define locktimeend(c) timer_end(c)
#else
#define locktimestart(c, v)
#define locktimeend(c)
#endif
/* Disable/Enable hardware interrupts. */
#define lock(c, v) do { intr_disable(); locktimestart(c, v); } while(0);
#define unlock(c) do { locktimeend(c); intr_enable(); } while(0);
/* Sizes of memory tables. The boot monitor distinguishes three memory areas,
* namely low mem below 1M, 1M-16M, and mem after 16M. More chunks are needed
* for DOS MINIX.
*/
#define NR_MEMS 8 /* number of chunks of memory */
#endif /* (CHIP == INTEL) */
#if (CHIP == M68000)
/* M68000 specific constants go here. */
#endif /* (CHIP == M68000) */
#if ENABLE_INT_TIMING
#define INT_TIMING_BITS 12
#define INT_TIMING_ELEMENTS (1L << 12)
#endif