minix/drivers/gpio/gpio.c
Thomas Cort 0a9eab0bb6 gpio: port to am335x
* port libgpio to am335x.
 * increase NR_IRQ to 16 to avoid too many IRQs requested error.
 * move gpio binary to /sbin (that's where mount looks for drivers).
 * fix bug that re-enabled banks that were disabled due to bad revision.
 * fix padconf masks for dm37xx in gpio driver (should be 16-bit).
 * fix a few typos in README.txt and comments.

Change-Id: I32374415a97135174c5224f76374a870909fa90c
2013-09-03 08:14:18 -04:00

298 lines
7 KiB
C

/*
* GPIO driver. This driver acts as a file system to allow
* reading and toggling of GPIO's.
*/
/* kernel headers */
#include <minix/driver.h>
#include <minix/drvlib.h>
#include <minix/vtreefs.h>
#include <minix/syslib.h>
#include <minix/log.h>
#include <minix/mmio.h>
#include <minix/gpio.h>
#include <minix/padconf.h>
/* system headers */
#include <sys/stat.h>
#include <sys/queue.h>
#include <sys/queue.h>
/* usr headers */
#include <assert.h>
#include <stdio.h>
#include <stdlib.h>
#include <stdarg.h>
#include <signal.h>
#include <unistd.h>
#include <string.h>
/* local headers */
/* used for logging */
static struct log log = {
.name = "gpio",
.log_level = LEVEL_INFO,
.log_func = default_log
};
#define GPIO_CB_READ 0
#define GPIO_CB_INTR_READ 1
#define GPIO_CB_ON 2
#define GPIO_CB_OFF 3
/* The vtreefs library provides callback data when calling
* the read function of inode. gpio_cbdata is used here to
* map between inodes and gpio's. VTreeFS is read-only. to work
* around that issue for a single GPIO we create multiple virtual
* files that can be *read* to read the gpio value and power on
* and off the gpio.
*/
struct gpio_cbdata
{
struct gpio *gpio; /* obtained from the driver */
int type; /* read=0/on=1/off=2 */
TAILQ_ENTRY(gpio_cbdata) next;
};
/* list of inodes used in this driver */
/* *INDENT-OFF* */
TAILQ_HEAD(gpio_cbdata_head, gpio_cbdata)
gpio_cbdata_list = TAILQ_HEAD_INITIALIZER(gpio_cbdata_list);
/* *INDENT-ON* */
/* Sane file stats for a directory */
static struct inode_stat default_file_stat = {
.mode = S_IFREG | 04,
.uid = 0,
.gid = 0,
.size = 0,
.dev = NO_DEV,
};
int
add_gpio_inode(char *name, int nr, int mode)
{
/* Create 2 files nodes for "name" "nameon" and "nameoff" to read and
* set values as we don't support writing yet */
char tmpname[200];
struct gpio_cbdata *cb;
struct gpio *gpio;
/* claim and configure the gpio */
if (gpio_claim("gpiofs", nr, &gpio)) {
log_warn(&log, "Failed to claim GPIO %d\n", nr);
return EIO;
}
assert(gpio != NULL);
if (gpio_pin_mode(gpio, mode)) {
log_warn(&log, "Failed to switch GPIO %d to mode %d\n", nr,
mode);
return EIO;
}
/* read value */
cb = malloc(sizeof(struct gpio_cbdata));
if (cb == NULL) {
return ENOMEM;
}
memset(cb, 0, sizeof(*cb));
cb->type = GPIO_CB_READ;
cb->gpio = gpio;
snprintf(tmpname, 200, "%s", name);
add_inode(get_root_inode(), tmpname, NO_INDEX, &default_file_stat, 0,
(cbdata_t) cb);
TAILQ_INSERT_HEAD(&gpio_cbdata_list, cb, next);
if (mode == GPIO_MODE_OUTPUT) {
/* if we configured the GPIO pin as output mode also create
* two additional files to turn on and off the GPIO. */
/* turn on */
cb = malloc(sizeof(struct gpio_cbdata));
if (cb == NULL) {
return ENOMEM;
}
memset(cb, 0, sizeof(*cb));
cb->type = GPIO_CB_ON;
cb->gpio = gpio;
snprintf(tmpname, 200, "%sOn", name);
add_inode(get_root_inode(), tmpname, NO_INDEX,
&default_file_stat, 0, (cbdata_t) cb);
TAILQ_INSERT_HEAD(&gpio_cbdata_list, cb, next);
/* turn off */
cb = malloc(sizeof(struct gpio_cbdata));
if (cb == NULL) {
return ENOMEM;
}
memset(cb, 0, sizeof(*cb));
cb->type = GPIO_CB_OFF;
cb->gpio = gpio;
snprintf(tmpname, 200, "%sOff", name);
add_inode(get_root_inode(), tmpname, NO_INDEX,
&default_file_stat, 0, (cbdata_t) cb);
TAILQ_INSERT_HEAD(&gpio_cbdata_list, cb, next);
} else {
/* read interrupt */
cb = malloc(sizeof(struct gpio_cbdata));
if (cb == NULL) {
return ENOMEM;
}
memset(cb, 0, sizeof(*cb));
cb->type = GPIO_CB_INTR_READ;
cb->gpio = gpio;
snprintf(tmpname, 200, "%sIntr", name);
add_inode(get_root_inode(), tmpname, NO_INDEX,
&default_file_stat, 0, (cbdata_t) cb);
TAILQ_INSERT_HEAD(&gpio_cbdata_list, cb, next);
}
return OK;
}
static void
init_hook(void)
{
/* This hook will be called once, after VTreeFS has initialized. */
if (gpio_init()) {
log_warn(&log, "Failed to init gpio driver\n");
}
#ifdef AM335X
/* Export GPIO3_19 (P9-27 on BBB) output as LCD_EN */
sys_padconf(CONTROL_CONF_MCASP0_FSR, 0xffffffff,
(CONTROL_CONF_PUTYPESEL | CONTROL_CONF_MUXMODE(7)));
add_gpio_inode("LCD_EN", (32 * 3) + 19, GPIO_MODE_OUTPUT);
/* Export GPIO1_17 (P9-23 on BBB) input as RIGHT */
/* assumes external pull-up resistor (10K) */
sys_padconf(CONTROL_CONF_SPI0_D0, 0xffffffff, (CONTROL_CONF_RXACTIVE |
CONTROL_CONF_PUDEN | CONTROL_CONF_MUXMODE(7)));
add_gpio_inode("RIGHT", (32 * 1) + 17, GPIO_MODE_INPUT);
#elif DM37XX
add_gpio_inode("USR0", 149, GPIO_MODE_OUTPUT);
add_gpio_inode("USR1", 150, GPIO_MODE_OUTPUT);
add_gpio_inode("Button", 4, GPIO_MODE_INPUT);
/* configure GPIO_144 to be exported */
sys_padconf(CONTROL_PADCONF_UART2_CTS, 0x0000ffff,
PADCONF_MUXMODE(4) | PADCONF_PULL_MODE_PD_EN |
PADCONF_INPUT_ENABLE(1));
sys_padconf(CONTROL_PADCONF_MMC2_DAT6, 0xffff0000,
(PADCONF_MUXMODE(4) | PADCONF_PULL_MODE_PD_EN |
PADCONF_INPUT_ENABLE(1)) << 16);
/* Added for demo purposes */
add_gpio_inode("BigRedButton", 144, GPIO_MODE_INPUT);
add_gpio_inode("BigRedButtonLed", 139, GPIO_MODE_OUTPUT);
#endif /* DM37XX */
}
static int
read_hook
(struct inode *inode, off_t offset, char **ptr, size_t * len,
cbdata_t cbdata)
{
/* This hook will be called every time a regular file is read. We use
* it to dyanmically generate the contents of our file. */
static char data[26];
int value;
struct gpio_cbdata *gpio_cbdata = (struct gpio_cbdata *) cbdata;
assert(gpio_cbdata->gpio != NULL);
if (gpio_cbdata->type == GPIO_CB_ON
|| gpio_cbdata->type == GPIO_CB_OFF) {
/* turn on or off */
if (gpio_set(gpio_cbdata->gpio,
(gpio_cbdata->type == GPIO_CB_ON) ? 1 : 0)) {
*len = 0;
return EIO;
}
*len = 0;
return OK;
}
if (gpio_cbdata->type == GPIO_CB_INTR_READ) {
/* reading interrupt */
if (gpio_intr_read(gpio_cbdata->gpio, &value)) {
*len = 0;
return EIO;
}
} else {
/* reading */
if (gpio_read(gpio_cbdata->gpio, &value)) {
*len = 0;
return EIO;
}
}
snprintf(data, 26, "%d\n", value);
/* If the offset is beyond the end of the string, return EOF. */
if (offset > strlen(data)) {
*len = 0;
return OK;
}
/* Otherwise, return a pointer into 'data'. If necessary, bound the
* returned length to the length of the rest of the string. Note that
* 'data' has to be static, because it will be used after this
* function returns. */
*ptr = data + offset;
if (*len > strlen(data) - offset)
*len = strlen(data) - offset;
return OK;
}
static int
message_hook(message * m)
{
gpio_intr_message(m);
return OK;
}
int
main(int argc, char **argv)
{
struct fs_hooks hooks;
struct inode_stat root_stat;
/* Set and apply the environment */
env_setargs(argc, argv);
/* fill in the hooks */
memset(&hooks, 0, sizeof(hooks));
hooks.init_hook = init_hook;
hooks.read_hook = read_hook;
hooks.message_hook = message_hook;
root_stat.mode = S_IFDIR | S_IRUSR | S_IRGRP | S_IROTH;
root_stat.uid = 0;
root_stat.gid = 0;
root_stat.size = 0;
root_stat.dev = NO_DEV;
/* limit the number of indexed entries */
start_vtreefs(&hooks, 30, &root_stat, 0);
return EXIT_SUCCESS;
}