191 lines
5.2 KiB
C
191 lines
5.2 KiB
C
/*
|
|
** File: ne.c Jun. 08, 2000
|
|
**
|
|
** Driver for the NE*000 ethernet cards and derivates.
|
|
** This file contains only the ne specific code,
|
|
** the rest is in 8390.c Code specific for ISA bus only
|
|
**
|
|
** Created: March 15, 1994 by Philip Homburg <philip@cs.vu.nl>
|
|
** PchId: ne2000.c,v 1.4 1996/01/19 23:30:34 philip Exp
|
|
**
|
|
** Modified: Jun. 08, 2000 by Giovanni Falzoni <gfalzoni@inwind.it>
|
|
** Adapted to interface new main network task.
|
|
*/
|
|
|
|
#include <minix/drivers.h>
|
|
#include <net/gen/ether.h>
|
|
#include <net/gen/eth_io.h>
|
|
#include "dp.h"
|
|
|
|
#if (ENABLE_NE2000 == 1)
|
|
|
|
#include "8390.h"
|
|
#include "ne.h"
|
|
|
|
/*
|
|
** Name: void ne_reset(dpeth_t * dep);
|
|
** Function: Resets the board and checks if reset cycle completes
|
|
*/
|
|
static int ne_reset(dpeth_t * dep)
|
|
{
|
|
int count = 0;
|
|
|
|
/* Reset the ethernet card */
|
|
outb_ne(dep, NE_RESET, inb_ne(dep, NE_RESET));
|
|
do {
|
|
if (++count > 10) return FALSE; /* 20 mSecs. timeout */
|
|
milli_delay(2);
|
|
} while ((inb_ne(dep, DP_ISR) & ISR_RST) == 0);
|
|
return TRUE;
|
|
}
|
|
|
|
/*
|
|
** Name: void ne_close(dpeth_t * dep);
|
|
** Function: Stops the board by resetting it and masking interrupts.
|
|
*/
|
|
static void ne_close(dpeth_t * dep)
|
|
{
|
|
|
|
(void)ne_reset(dep);
|
|
outb_ne(dep, DP_ISR, 0xFF);
|
|
sys_irqdisable(&dep->de_hook);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
** Name: void ne_init(dpeth_t * dep);
|
|
** Function: Initialize the board making it ready to work.
|
|
*/
|
|
static void ne_init(dpeth_t * dep)
|
|
{
|
|
int ix;
|
|
|
|
dep->de_data_port = dep->de_base_port + NE_DATA;
|
|
if (dep->de_16bit) {
|
|
dep->de_ramsize = NE2000_SIZE;
|
|
dep->de_offset_page = NE2000_START / DP_PAGESIZE;
|
|
} else {
|
|
dep->de_ramsize = NE1000_SIZE;
|
|
dep->de_offset_page = NE1000_START / DP_PAGESIZE;
|
|
}
|
|
|
|
/* Allocates two send buffers from onboard RAM */
|
|
dep->de_sendq_nr = SENDQ_NR;
|
|
for (ix = 0; ix < SENDQ_NR; ix += 1) {
|
|
dep->de_sendq[ix].sq_sendpage = dep->de_offset_page + ix * SENDQ_PAGES;
|
|
}
|
|
|
|
/* Remaining onboard RAM allocated for receiving */
|
|
dep->de_startpage = dep->de_offset_page + ix * SENDQ_PAGES;
|
|
dep->de_stoppage = dep->de_offset_page + dep->de_ramsize / DP_PAGESIZE;
|
|
|
|
/* Can't override the default IRQ. */
|
|
dep->de_irq &= NOT(DEI_DEFAULT);
|
|
|
|
ns_init(dep); /* Initialize DP controller */
|
|
|
|
printf("%s: NE%d000 (%dkB RAM) at %X:%d - ",
|
|
dep->de_name,
|
|
dep->de_16bit ? 2 : 1,
|
|
dep->de_ramsize / 1024,
|
|
dep->de_base_port, dep->de_irq);
|
|
for (ix = 0; ix < SA_ADDR_LEN; ix += 1)
|
|
printf("%02X%c", dep->de_address.ea_addr[ix], ix < SA_ADDR_LEN - 1 ? ':' : '\n');
|
|
return;
|
|
}
|
|
|
|
/*
|
|
** Name: int ne_probe(dpeth_t * dep);
|
|
** Function: Probe for the presence of a NE*000 card by testing
|
|
** whether the board is reachable through the dp8390.
|
|
** Note that the NE1000 is an 8bit card and has a memory
|
|
** region distict from the 16bit NE2000.
|
|
*/
|
|
PUBLIC int ne_probe(dpeth_t * dep)
|
|
{
|
|
int ix, wd, loc1, loc2;
|
|
char EPROM[32];
|
|
static const struct {
|
|
unsigned char offset;
|
|
unsigned char value;
|
|
} InitSeq[] =
|
|
{
|
|
{ /* Selects page 0. */
|
|
DP_CR, (CR_NO_DMA | CR_PS_P0 | CR_STP),
|
|
},
|
|
{ /* Set byte-wide access and 8 bytes burst mode. */
|
|
DP_DCR, (DCR_8BYTES | DCR_BMS),
|
|
},
|
|
{ /* Clears the count registers. */
|
|
DP_RBCR0, 0x00, }, { DP_RBCR1, 0x00,
|
|
},
|
|
{ /* Mask completion irq. */
|
|
DP_IMR, 0x00, }, { DP_ISR, 0xFF,
|
|
},
|
|
{ /* Set receiver to monitor */
|
|
DP_RCR, RCR_MON,
|
|
},
|
|
{ /* and transmitter to loopback mode. */
|
|
DP_TCR, TCR_INTERNAL,
|
|
},
|
|
{ /* Transmit 32 bytes */
|
|
DP_RBCR0, 32, }, { DP_RBCR1, 0,
|
|
},
|
|
{ /* DMA starting at 0x0000. */
|
|
DP_RSAR0, 0x00, }, { DP_RSAR1, 0x00,
|
|
},
|
|
{ /* Start board (reads) */
|
|
DP_CR, (CR_PS_P0 | CR_DM_RR | CR_STA),
|
|
},
|
|
};
|
|
|
|
dep->de_dp8390_port = dep->de_base_port + NE_DP8390;
|
|
|
|
if ((loc1 = inb_ne(dep, NE_DP8390)) == 0xFF) return FALSE;
|
|
|
|
/* Check if the dp8390 is really there */
|
|
outb_ne(dep, DP_CR, CR_STP | CR_NO_DMA | CR_PS_P1);
|
|
loc2 = inb_ne(dep, DP_MAR5); /* Saves one byte of the address */
|
|
outb_ne(dep, DP_MAR5, 0xFF); /* Write 0xFF to it (same offset as DP_CNTR0) */
|
|
outb_ne(dep, DP_CR, CR_NO_DMA | CR_PS_P0); /* Back to page 0 */
|
|
inb_ne(dep, DP_CNTR0); /* Reading counter resets it */
|
|
if (inb_ne(dep, DP_CNTR0) != 0) {
|
|
outb_ne(dep, NE_DP8390, loc1); /* Try to restore modified bytes */
|
|
outb_ne(dep, DP_TCR, loc2);
|
|
return FALSE;
|
|
}
|
|
|
|
/* Try to reset the board */
|
|
if (ne_reset(dep) == FALSE) return FALSE;
|
|
|
|
/* Checks whether the board is 8/16bits and a real NE*000 or clone */
|
|
for (ix = 0; ix < sizeof(InitSeq)/sizeof(InitSeq[0]); ix += 1) {
|
|
outb_ne(dep, InitSeq[ix].offset, InitSeq[ix].value);
|
|
}
|
|
for (ix = 0, wd = 1; ix < 32; ix += 2) {
|
|
EPROM[ix + 0] = inb_ne(dep, NE_DATA);
|
|
EPROM[ix + 1] = inb_ne(dep, NE_DATA);
|
|
/* NE2000s and clones read same value for even and odd addresses */
|
|
if (EPROM[ix + 0] != EPROM[ix + 1]) wd = 0;
|
|
}
|
|
if (wd == 1) { /* Normalize EPROM contents for NE2000 */
|
|
for (ix = 0; ix < 16; ix += 1) EPROM[ix] = EPROM[ix * 2];
|
|
}
|
|
/* Real NE*000 and good clones have '0x57' at locations 14 and 15 */
|
|
if (EPROM[14] != 0x57 || EPROM[15] != 0x57) return FALSE;
|
|
|
|
/* Setup the ethernet address. */
|
|
for (ix = 0; ix < SA_ADDR_LEN; ix += 1) {
|
|
dep->de_address.ea_addr[ix] = EPROM[ix];
|
|
}
|
|
dep->de_16bit = wd;
|
|
dep->de_linmem = 0; /* Uses Programmed I/O only */
|
|
dep->de_prog_IO = 1;
|
|
dep->de_initf = ne_init;
|
|
dep->de_stopf = ne_close;
|
|
return TRUE;
|
|
}
|
|
|
|
#endif /* ENABLE_NE2000 */
|
|
|
|
/** ne.c **/
|