sanchayanmaity/minix
1
0
Fork 0
Code Issues Pull requests Packages Projects Releases Wiki Activity
minix/drivers/dpeth/dp.h
Ben Gras cfb2d7bca5 retire BIOS_SEG and umap_bios 
. readbios call is now a physical copy with range check in
	  the kernel call instead of BIOS_SEG+umap_bios
	. requires all access to physical memory in bios range to go
	  through sys_readbios
	. drivers/dpeth: wasn't using it
	. adjusted printer
2012-05-09 19:03:59 +02:00

282 lines
7.2 KiB
C
Raw Blame History

/*
** File: eth.h Version 1.00, Jan. 14, 1997
**
** Author: Giovanni Falzoni <gfalzoni@inwind.it>
**
** Interface description for ethernet device driver
**
** $Log$
** Revision 1.5 2006/07/10 12:43:38 philip
** Safecopy support in ethernet drivers.
**
** Revision 1.4 2005/09/04 18:52:16 beng
** Giovanni's fixes to dpeth:
** Date: Sat, 03 Sep 2005 11:05:22 +0200
** Subject: Minix 3.0.8
**
** Revision 1.3 2005/08/03 11:53:34 jnherder
** Miscellaneous cleanups.
**
** Revision 1.2 2005/08/02 15:30:35 jnherder
** Various updates to support dynamically starting drivers.
** Output during initialization should be suppressed. Unless an error occurs.
** Note that main() can now be main(int argc, char **argv) and arguments can
** be passed when bringing up the driver.
**
** Revision 1.1 2005/06/29 10:16:46 beng
** Import of dpeth 3c501/3c509b/.. ethernet driver by
** Giovanni Falzoni <fgalzoni@inwind.it>.
**
** Revision 2.0 2005/06/26 16:16:46 lsodgf0
** Initial revision for Minix 3.0.6
*/
#include <sys/null.h>
#undef ENABLE_3C501
#undef ENABLE_3C503
#undef ENABLE_3C509
#undef ENABLE_NE2000
#undef ENABLE_WDETH
#undef ENABLE_DP8390
#define ENABLE_3C501 1 /* enable 3Com Etherlink I board */
#define ENABLE_3C503 1 /* enable 3Com Etherlink II board */
#define ENABLE_3C509 1 /* enable 3Com Etherlink III board */
#define ENABLE_NE2000 1 /* enable Novell N2000 board */
#define ENABLE_WDETH 1 /* enable Western Digital WD80x3 */
#define ENABLE_DP8390 (ENABLE_3C503|ENABLE_WDETH|ENABLE_NE2000)
#define HAVE_BUFFERS (ENABLE_3C501|ENABLE_3C509)
#define NOT(x) (~(x))
#if debug == 1
# define DEBUG(statm) statm
#else
# define DEBUG(statm)
#endif
typedef struct _m_hdr_t { /* Buffer handling header */
struct _m_hdr_t *next;
int size;
} m_hdr_t;
typedef struct _buff_t { /* Receive/Transmit buffer header */
struct _buff_t *next;
int size;
int client;
char buffer[2];
} buff_t;
struct dpeth;
struct iovec_dat;
typedef void (*dp_eth_t) (struct dpeth *);
typedef void (*dp_send_recv_t) (struct dpeth *, int, int);
#if ENABLE_DP8390 == 1
typedef void (*dp_user2nicf_t) (struct dpeth *, int, int);
typedef void (*dp_nic2userf_t) (struct dpeth *, int, int);
typedef void (*dp_getblock_t) (struct dpeth *, u16_t, int, void *);
#endif
#define SENDQ_NR 2 /* Size of the send queue */
#define IOVEC_NR 16 /* Number of IOVEC entries at a time */
typedef struct iovec_dat_s {
iovec_s_t iod_iovec[IOVEC_NR];
int iod_iovec_s;
endpoint_t iod_proc_nr;
cp_grant_id_t iod_grant;
vir_bytes iod_iovec_offset;
} iovec_dat_s_t;
typedef struct dpeth {
/* The de_base_port field is the starting point of the probe. The
* conf routine also fills de_linmem and de_irq. If the probe routine
* knows the irq and/or memory address because they are hardwired in
* the board, the probe should modify these fields. Futhermore, the
* probe routine should also fill in de_initf and de_stopf fields
* with the appropriate function pointers and set de_prog_IO iff
* programmed I/O is to be used.
*
* The initf function fills the following fields. Only cards that do
* programmed I/O fill in the de_data_port field. In addition, the
* init routine has to fill in the sendq data structures. */
/* Board hardware interface */
port_t de_base_port;
port_t de_data_port; /* For boards using Prog. I/O for xmit/recv */
int de_irq;
int de_int_pending;
int de_hook; /* interrupt hook at kernel */
char de_name[8];
#define DEI_DEFAULT 0x8000
phys_bytes de_linmem; /* For boards using shared memory */
vir_bytes de_memoffs;
int de_ramsize; /* Size of on board memory */
int de_offset_page; /* Offset of shared memory page */
/* Board specific functions */
dp_eth_t de_initf;
dp_eth_t de_stopf;
dp_eth_t de_resetf;
dp_eth_t de_flagsf;
dp_eth_t de_getstatsf;
dp_eth_t de_dumpstatsf;
dp_eth_t de_interruptf;
dp_send_recv_t de_recvf;
dp_send_recv_t de_sendf;
ether_addr_t de_address; /* Ethernet Address */
eth_stat_t de_stat; /* Ethernet Statistics */
unsigned long bytes_Tx; /* Total bytes sent/received */
unsigned long bytes_Rx;
#define SA_ADDR_LEN sizeof(ether_addr_t)
int de_flags; /* Send/Receive mode (Configuration) */
#define DEF_EMPTY 0x0000
#define DEF_READING 0x0001
#define DEF_RECV_BUSY 0x0002
#define DEF_ACK_RECV 0x0004
#define DEF_SENDING 0x0010
#define DEF_XMIT_BUSY 0x0020
#define DEF_ACK_SEND 0x0040
#define DEF_PROMISC 0x0100
#define DEF_MULTI 0x0200
#define DEF_BROAD 0x0400
#define DEF_ENABLED 0x2000
#define DEF_STOPPED 0x4000
int de_mode; /* Status of the Interface */
#define DEM_DISABLED 0x0000
#define DEM_SINK 0x0001
#define DEM_ENABLED 0x0002
/* Temporary storage for RECV/SEND requests */
iovec_dat_s_t de_read_iovec;
iovec_dat_s_t de_write_iovec;
vir_bytes de_read_s;
vir_bytes de_send_s;
int de_client;
/*
message de_sendmsg;
iovec_dat_t de_tmp_iovec;
*/
#if ENABLE_DP8390 == 1
/* For use by NS DP8390 driver */
port_t de_dp8390_port;
int de_prog_IO;
int de_16bit;
int de_startpage;
int de_stoppage;
/* Do it yourself send queue */
struct sendq {
int sq_filled; /* This buffer contains a packet */
int sq_size; /* with this size */
int sq_sendpage; /* starting page of the buffer */
} de_sendq[SENDQ_NR];
int de_sendq_nr;
int de_sendq_head; /* Enqueue at the head */
int de_sendq_tail; /* Dequeue at the tail */
dp_user2nicf_t de_user2nicf;
dp_nic2userf_t de_nic2userf;
dp_getblock_t de_getblockf;
#endif
#if ENABLE_3C509 == 1
/* For use by 3Com Etherlink III (3c509) driver */
port_t de_id_port;
port_t de_if_port;
#endif
#if ENABLE_3C501 == 1 || ENABLE_3C509 == 1
/* For use by 3Com Etherlink (3c501 and 3c509) driver */
buff_t *de_recvq_head;
buff_t *de_recvq_tail;
buff_t *de_xmitq_head;
buff_t *de_xmitq_tail;
u16_t de_recv_mode;
clock_t de_xmit_start;
#endif
} dpeth_t;
/*
* Function definitions
*/
/* dp.c */
void dp_next_iovec(iovec_dat_s_t * iovp);
/* devio.c */
#if defined USE_IOPL
#include <machine/portio.h>
#else
unsigned int inb(unsigned short int);
unsigned int inw(unsigned short int);
void insb(unsigned short int, endpoint_t, void *, int);
void insw(unsigned short int, int, void *, int);
void outb(unsigned short int, unsigned long);
void outw(unsigned short int, unsigned long);
void outsb(unsigned short int, endpoint_t, void *, int);
void outsw(unsigned short int, int, void *, int);
#endif
/* netbuff.c */
void *alloc_buff(dpeth_t *, int);
void free_buff(dpeth_t *, void *);
void init_buff(dpeth_t *, buff_t **);
void mem2user(dpeth_t *, buff_t *);
void user2mem(dpeth_t *, buff_t *);
/* 3c501.c */
#if ENABLE_3C501 == 1
int el1_probe(dpeth_t *);
#else
#define el1_probe(x) (0)
#endif
/* 3c503.c */
#if ENABLE_3C503 == 1
int el2_probe(dpeth_t *);
#else
#define el2_probe(x) (0)
#endif
/* 3c509.c */
#if ENABLE_3C509 == 1
int el3_probe(dpeth_t *);
#else
#define el3_probe(x) (0)
#endif
/* ne.c */
#if ENABLE_NE2000 == 1
int ne_probe(dpeth_t * dep);
#else
#define ne_probe(x) (0)
#endif
/* wd.c */
#if ENABLE_WDETH == 1
int wdeth_probe(dpeth_t * dep);
#else
#define wdeth_probe(x) (0)
#endif
#define lock() (++dep->de_int_pending,sys_irqdisable(&dep->de_hook))
#define unlock() do{int i=(--dep->de_int_pending)?0:sys_irqenable(&dep->de_hook);(void) i;}while(0)
#define milli_delay(t) tickdelay(1)
/** dp.h **/
Reference in a new issue View git blame Copy permalink