minix/servers/fs/cache.c
2005-10-12 15:07:26 +00:00

442 lines
15 KiB
C

/* The file system maintains a buffer cache to reduce the number of disk
* accesses needed. Whenever a read or write to the disk is done, a check is
* first made to see if the block is in the cache. This file manages the
* cache.
*
* The entry points into this file are:
* get_block: request to fetch a block for reading or writing from cache
* put_block: return a block previously requested with get_block
* alloc_zone: allocate a new zone (to increase the length of a file)
* free_zone: release a zone (when a file is removed)
* invalidate: remove all the cache blocks on some device
*
* Private functions:
* rw_block: read or write a block from the disk itself
*/
#include "fs.h"
#include <minix/com.h>
#include "buf.h"
#include "file.h"
#include "fproc.h"
#include "super.h"
FORWARD _PROTOTYPE( void rm_lru, (struct buf *bp) );
FORWARD _PROTOTYPE( int rw_block, (struct buf *, int) );
/*===========================================================================*
* get_block *
*===========================================================================*/
PUBLIC struct buf *get_block(dev, block, only_search)
register dev_t dev; /* on which device is the block? */
register block_t block; /* which block is wanted? */
int only_search; /* if NO_READ, don't read, else act normal */
{
/* Check to see if the requested block is in the block cache. If so, return
* a pointer to it. If not, evict some other block and fetch it (unless
* 'only_search' is 1). All the blocks in the cache that are not in use
* are linked together in a chain, with 'front' pointing to the least recently
* used block and 'rear' to the most recently used block. If 'only_search' is
* 1, the block being requested will be overwritten in its entirety, so it is
* only necessary to see if it is in the cache; if it is not, any free buffer
* will do. It is not necessary to actually read the block in from disk.
* If 'only_search' is PREFETCH, the block need not be read from the disk,
* and the device is not to be marked on the block, so callers can tell if
* the block returned is valid.
* In addition to the LRU chain, there is also a hash chain to link together
* blocks whose block numbers end with the same bit strings, for fast lookup.
*/
int b;
register struct buf *bp, *prev_ptr;
/* Search the hash chain for (dev, block). Do_read() can use
* get_block(NO_DEV ...) to get an unnamed block to fill with zeros when
* someone wants to read from a hole in a file, in which case this search
* is skipped
*/
if (dev != NO_DEV) {
b = (int) block & HASH_MASK;
bp = buf_hash[b];
while (bp != NIL_BUF) {
if (bp->b_blocknr == block && bp->b_dev == dev) {
/* Block needed has been found. */
if (bp->b_count == 0) rm_lru(bp);
bp->b_count++; /* record that block is in use */
return(bp);
} else {
/* This block is not the one sought. */
bp = bp->b_hash; /* move to next block on hash chain */
}
}
}
/* Desired block is not on available chain. Take oldest block ('front'). */
if ((bp = front) == NIL_BUF) panic(__FILE__,"all buffers in use", NR_BUFS);
rm_lru(bp);
/* Remove the block that was just taken from its hash chain. */
b = (int) bp->b_blocknr & HASH_MASK;
prev_ptr = buf_hash[b];
if (prev_ptr == bp) {
buf_hash[b] = bp->b_hash;
} else {
/* The block just taken is not on the front of its hash chain. */
while (prev_ptr->b_hash != NIL_BUF)
if (prev_ptr->b_hash == bp) {
prev_ptr->b_hash = bp->b_hash; /* found it */
break;
} else {
prev_ptr = prev_ptr->b_hash; /* keep looking */
}
}
/* If the block taken is dirty, make it clean by writing it to the disk.
* Avoid hysteresis by flushing all other dirty blocks for the same device.
*/
if (bp->b_dev != NO_DEV) {
if (bp->b_dirt == DIRTY) flushall(bp->b_dev);
#if ENABLE_CACHE2
put_block2(bp);
#endif
}
/* Fill in block's parameters and add it to the hash chain where it goes. */
bp->b_dev = dev; /* fill in device number */
bp->b_blocknr = block; /* fill in block number */
bp->b_count++; /* record that block is being used */
b = (int) bp->b_blocknr & HASH_MASK;
bp->b_hash = buf_hash[b];
buf_hash[b] = bp; /* add to hash list */
/* Go get the requested block unless searching or prefetching. */
if (dev != NO_DEV) {
#if ENABLE_CACHE2
if (get_block2(bp, only_search)) /* in 2nd level cache */;
else
#endif
if (only_search == PREFETCH) bp->b_dev = NO_DEV;
else
if (only_search == NORMAL) {
rw_block(bp, READING);
}
}
return(bp); /* return the newly acquired block */
}
/*===========================================================================*
* put_block *
*===========================================================================*/
PUBLIC void put_block(bp, block_type)
register struct buf *bp; /* pointer to the buffer to be released */
int block_type; /* INODE_BLOCK, DIRECTORY_BLOCK, or whatever */
{
/* Return a block to the list of available blocks. Depending on 'block_type'
* it may be put on the front or rear of the LRU chain. Blocks that are
* expected to be needed again shortly (e.g., partially full data blocks)
* go on the rear; blocks that are unlikely to be needed again shortly
* (e.g., full data blocks) go on the front. Blocks whose loss can hurt
* the integrity of the file system (e.g., inode blocks) are written to
* disk immediately if they are dirty.
*/
if (bp == NIL_BUF) return; /* it is easier to check here than in caller */
bp->b_count--; /* there is one use fewer now */
if (bp->b_count != 0) return; /* block is still in use */
bufs_in_use--; /* one fewer block buffers in use */
/* Put this block back on the LRU chain. If the ONE_SHOT bit is set in
* 'block_type', the block is not likely to be needed again shortly, so put
* it on the front of the LRU chain where it will be the first one to be
* taken when a free buffer is needed later.
*/
if (bp->b_dev == DEV_RAM || block_type & ONE_SHOT) {
/* Block probably won't be needed quickly. Put it on front of chain.
* It will be the next block to be evicted from the cache.
*/
bp->b_prev = NIL_BUF;
bp->b_next = front;
if (front == NIL_BUF)
rear = bp; /* LRU chain was empty */
else
front->b_prev = bp;
front = bp;
} else {
/* Block probably will be needed quickly. Put it on rear of chain.
* It will not be evicted from the cache for a long time.
*/
bp->b_prev = rear;
bp->b_next = NIL_BUF;
if (rear == NIL_BUF)
front = bp;
else
rear->b_next = bp;
rear = bp;
}
/* Some blocks are so important (e.g., inodes, indirect blocks) that they
* should be written to the disk immediately to avoid messing up the file
* system in the event of a crash.
*/
if ((block_type & WRITE_IMMED) && bp->b_dirt==DIRTY && bp->b_dev != NO_DEV) {
rw_block(bp, WRITING);
}
}
/*===========================================================================*
* alloc_zone *
*===========================================================================*/
PUBLIC zone_t alloc_zone(dev, z)
dev_t dev; /* device where zone wanted */
zone_t z; /* try to allocate new zone near this one */
{
/* Allocate a new zone on the indicated device and return its number. */
int major, minor;
bit_t b, bit;
struct super_block *sp;
/* Note that the routine alloc_bit() returns 1 for the lowest possible
* zone, which corresponds to sp->s_firstdatazone. To convert a value
* between the bit number, 'b', used by alloc_bit() and the zone number, 'z',
* stored in the inode, use the formula:
* z = b + sp->s_firstdatazone - 1
* Alloc_bit() never returns 0, since this is used for NO_BIT (failure).
*/
sp = get_super(dev);
/* If z is 0, skip initial part of the map known to be fully in use. */
if (z == sp->s_firstdatazone) {
bit = sp->s_zsearch;
} else {
bit = (bit_t) z - (sp->s_firstdatazone - 1);
}
b = alloc_bit(sp, ZMAP, bit);
if (b == NO_BIT) {
err_code = ENOSPC;
major = (int) (sp->s_dev >> MAJOR) & BYTE;
minor = (int) (sp->s_dev >> MINOR) & BYTE;
printf("No space on %sdevice %d/%d\n",
sp->s_dev == root_dev ? "root " : "", major, minor);
return(NO_ZONE);
}
if (z == sp->s_firstdatazone) sp->s_zsearch = b; /* for next time */
return(sp->s_firstdatazone - 1 + (zone_t) b);
}
/*===========================================================================*
* free_zone *
*===========================================================================*/
PUBLIC void free_zone(dev, numb)
dev_t dev; /* device where zone located */
zone_t numb; /* zone to be returned */
{
/* Return a zone. */
register struct super_block *sp;
bit_t bit;
/* Locate the appropriate super_block and return bit. */
sp = get_super(dev);
if (numb < sp->s_firstdatazone || numb >= sp->s_zones) return;
bit = (bit_t) (numb - (sp->s_firstdatazone - 1));
free_bit(sp, ZMAP, bit);
if (bit < sp->s_zsearch) sp->s_zsearch = bit;
}
/*===========================================================================*
* rw_block *
*===========================================================================*/
PRIVATE int rw_block(bp, rw_flag)
register struct buf *bp; /* buffer pointer */
int rw_flag; /* READING or WRITING */
{
/* Read or write a disk block. This is the only routine in which actual disk
* I/O is invoked. If an error occurs, a message is printed here, but the error
* is not reported to the caller. If the error occurred while purging a block
* from the cache, it is not clear what the caller could do about it anyway.
*/
int r, op;
off_t pos;
dev_t dev;
int block_size;
block_size = get_block_size(bp->b_dev);
if ( (dev = bp->b_dev) != NO_DEV) {
pos = (off_t) bp->b_blocknr * block_size;
op = (rw_flag == READING ? DEV_READ : DEV_WRITE);
r = dev_io(op, dev, FS_PROC_NR, bp->b_data, pos, block_size, 0);
if (r != block_size) {
if (r >= 0) r = END_OF_FILE;
if (r != END_OF_FILE)
printf("Unrecoverable disk error on device %d/%d, block %ld\n",
(dev>>MAJOR)&BYTE, (dev>>MINOR)&BYTE, bp->b_blocknr);
bp->b_dev = NO_DEV; /* invalidate block */
/* Report read errors to interested parties. */
if (rw_flag == READING) rdwt_err = r;
}
}
bp->b_dirt = CLEAN;
}
/*===========================================================================*
* invalidate *
*===========================================================================*/
PUBLIC void invalidate(device)
dev_t device; /* device whose blocks are to be purged */
{
/* Remove all the blocks belonging to some device from the cache. */
register struct buf *bp;
for (bp = &buf[0]; bp < &buf[NR_BUFS]; bp++)
if (bp->b_dev == device) bp->b_dev = NO_DEV;
#if ENABLE_CACHE2
invalidate2(device);
#endif
}
/*===========================================================================*
* flushall *
*===========================================================================*/
PUBLIC void flushall(dev)
dev_t dev; /* device to flush */
{
/* Flush all dirty blocks for one device. */
register struct buf *bp;
static struct buf *dirty[NR_BUFS]; /* static so it isn't on stack */
int ndirty;
for (bp = &buf[0], ndirty = 0; bp < &buf[NR_BUFS]; bp++)
if (bp->b_dirt == DIRTY && bp->b_dev == dev) dirty[ndirty++] = bp;
rw_scattered(dev, dirty, ndirty, WRITING);
}
/*===========================================================================*
* rw_scattered *
*===========================================================================*/
PUBLIC void rw_scattered(dev, bufq, bufqsize, rw_flag)
dev_t dev; /* major-minor device number */
struct buf **bufq; /* pointer to array of buffers */
int bufqsize; /* number of buffers */
int rw_flag; /* READING or WRITING */
{
/* Read or write scattered data from a device. */
register struct buf *bp;
int gap;
register int i;
register iovec_t *iop;
static iovec_t iovec[NR_IOREQS]; /* static so it isn't on stack */
int j, r;
int block_size;
block_size = get_block_size(dev);
/* (Shell) sort buffers on b_blocknr. */
gap = 1;
do
gap = 3 * gap + 1;
while (gap <= bufqsize);
while (gap != 1) {
gap /= 3;
for (j = gap; j < bufqsize; j++) {
for (i = j - gap;
i >= 0 && bufq[i]->b_blocknr > bufq[i + gap]->b_blocknr;
i -= gap) {
bp = bufq[i];
bufq[i] = bufq[i + gap];
bufq[i + gap] = bp;
}
}
}
/* Set up I/O vector and do I/O. The result of dev_io is OK if everything
* went fine, otherwise the error code for the first failed transfer.
*/
while (bufqsize > 0) {
for (j = 0, iop = iovec; j < NR_IOREQS && j < bufqsize; j++, iop++) {
bp = bufq[j];
if (bp->b_blocknr != bufq[0]->b_blocknr + j) break;
iop->iov_addr = (vir_bytes) bp->b_data;
iop->iov_size = block_size;
}
r = dev_io(rw_flag == WRITING ? DEV_SCATTER : DEV_GATHER,
dev, FS_PROC_NR, iovec,
(off_t) bufq[0]->b_blocknr * block_size, j, 0);
/* Harvest the results. Dev_io reports the first error it may have
* encountered, but we only care if it's the first block that failed.
*/
for (i = 0, iop = iovec; i < j; i++, iop++) {
bp = bufq[i];
if (iop->iov_size != 0) {
/* Transfer failed. An error? Do we care? */
if (r != OK && i == 0) {
printf(
"fs: I/O error on device %d/%d, block %lu\n",
(dev>>MAJOR)&BYTE, (dev>>MINOR)&BYTE,
bp->b_blocknr);
bp->b_dev = NO_DEV; /* invalidate block */
}
break;
}
if (rw_flag == READING) {
bp->b_dev = dev; /* validate block */
put_block(bp, PARTIAL_DATA_BLOCK);
} else {
bp->b_dirt = CLEAN;
}
}
bufq += i;
bufqsize -= i;
if (rw_flag == READING) {
/* Don't bother reading more than the device is willing to
* give at this time. Don't forget to release those extras.
*/
while (bufqsize > 0) {
put_block(*bufq++, PARTIAL_DATA_BLOCK);
bufqsize--;
}
}
if (rw_flag == WRITING && i == 0) {
/* We're not making progress, this means we might keep
* looping. Buffers remain dirty if un-written. Buffers are
* lost if invalidate()d or LRU-removed while dirty. This
* is better than keeping unwritable blocks around forever..
*/
break;
}
}
}
/*===========================================================================*
* rm_lru *
*===========================================================================*/
PRIVATE void rm_lru(bp)
struct buf *bp;
{
/* Remove a block from its LRU chain. */
struct buf *next_ptr, *prev_ptr;
bufs_in_use++;
next_ptr = bp->b_next; /* successor on LRU chain */
prev_ptr = bp->b_prev; /* predecessor on LRU chain */
if (prev_ptr != NIL_BUF)
prev_ptr->b_next = next_ptr;
else
front = next_ptr; /* this block was at front of chain */
if (next_ptr != NIL_BUF)
next_ptr->b_prev = prev_ptr;
else
rear = prev_ptr; /* this block was at rear of chain */
}