minix/drivers/ahci/ahci.h

#ifndef _AHCI_H
#define _AHCI_H

#include <minix/drivers.h>

#define NR_PORTS 32		/* maximum number of ports */
#define NR_CMDS 1		/* maximum number of queued commands */

/* Time values that can be set with options. */
#define SPINUP_TIMEOUT		5000	/* initial spin-up time (ms) */
#define SIG_TIMEOUT		250	/* time between signature checks (ms) */
#define NR_SIG_CHECKS		60	/* maximum number of times to check */
#define COMMAND_TIMEOUT		5000	/* time to wait for non-I/O cmd (ms) */
#define TRANSFER_TIMEOUT	15000	/* time to wait for I/O cmd (ms) */

/* Time values that are defined by the standards. */
#define SPINUP_DELAY		1	/* time to assert spin-up flag (ms) */
#define RESET_DELAY		1000	/* maximum HBA reset time (ms) */
#define PORTREG_DELAY		500	/* maximum port register update (ms) */

/* Host Bus Adapter (HBA) constants. */
#define AHCI_HBA_CAP	0		/* Host Capabilities */
#define 	AHCI_HBA_CAP_SNCQ	(1L << 30)	/* Native Cmd Queuing */
#define 	AHCI_HBA_CAP_SCLO	(1L << 24)	/* Cmd List Override */
#define 	AHCI_HBA_CAP_NCS_SHIFT	8		/* Nr of Cmd Slots */
#define 	AHCI_HBA_CAP_NCS_MASK	0x1FL
#define 	AHCI_HBA_CAP_NP_SHIFT	0		/* Nr of Ports */
#define 	AHCI_HBA_CAP_NP_MASK	0x1FL
#define AHCI_HBA_GHC	1		/* Global Host Control */
#define 	AHCI_HBA_GHC_AE		(1L << 31)	/* AHCI Enable */
#define 	AHCI_HBA_GHC_IE		(1L <<  1)	/* Interrupt Enable */
#define 	AHCI_HBA_GHC_HR		(1L <<  0)	/* HBA Reset */
#define AHCI_HBA_IS	2		/* Interrupt Status */
#define AHCI_HBA_PI	3		/* Ports Implemented */
#define AHCI_HBA_VS	4		/* Version */
#define AHCI_HBA_CAP2	9		/* Host Capabilities Extended */

/* Port constants. */
#define AHCI_PORT_CLB	0		/* Command List Base */
#define AHCI_PORT_CLBU	1		/* Command List Base, Upper 32 bits */
#define AHCI_PORT_FB	2		/* FIS Base */
#define AHCI_PORT_FBU	3		/* FIS Base, Upper 32 bits */
#define AHCI_PORT_IS	4		/* Interrupt Status */
#define 	AHCI_PORT_IS_TFES	(1L << 30)	/* Task File Error */
#define 	AHCI_PORT_IS_HBFS	(1L << 29)	/* Host Bus Fatal */
#define 	AHCI_PORT_IS_HBDS	(1L << 28)	/* Host Bus Data */
#define 	AHCI_PORT_IS_IFS	(1L << 27)	/* Interface Fatal */
#define 	AHCI_PORT_IS_PRCS	(1L << 22)	/* PhyRdy Change */
#define 	AHCI_PORT_IS_PCS	(1L <<  6)	/* Port Conn Change */
#define 	AHCI_PORT_IS_PSS	(1L <<  1)	/* PIO Setup FIS */
#define 	AHCI_PORT_IS_DHRS	(1L <<  0)	/* D2H Register FIS */
#define AHCI_PORT_IS_RESTART \
	(AHCI_PORT_IS_TFES | AHCI_PORT_IS_HBFS | AHCI_PORT_IS_HBDS | \
	 AHCI_PORT_IS_IFS)
#define AHCI_PORT_IS_MASK \
	(AHCI_PORT_IS_RESTART | AHCI_PORT_IS_PRCS | AHCI_PORT_IS_PCS | \
	 AHCI_PORT_IS_DHRS | AHCI_PORT_IS_PSS)
#define AHCI_PORT_IE	5		/* Interrupt Enable */
#define 	AHCI_PORT_IE_MASK	AHCI_PORT_IS_MASK
#define 	AHCI_PORT_IE_PRCE	AHCI_PORT_IS_PRCS
#define 	AHCI_PORT_IE_PCE	AHCI_PORT_IS_PCS
#define 	AHCI_PORT_IE_NONE	0L
#define AHCI_PORT_CMD	6		/* Command and Status */
#define 	AHCI_PORT_CMD_CR	(1L << 15)	/* Cmd List Running */
#define 	AHCI_PORT_CMD_FR	(1L << 14)	/* FIS Recv Running */
#define 	AHCI_PORT_CMD_FRE	(1L <<  4)	/* FIS Recv Enabled */
#define 	AHCI_PORT_CMD_SUD	(1L <<  1)	/* Spin-Up Device */
#define 	AHCI_PORT_CMD_ST	(1L <<  0)	/* Start */
#define AHCI_PORT_TFD	8		/* Task File Data */
#define 	AHCI_PORT_TFD_STS_BSY	(1L << 7)	/* Busy */
#define 	AHCI_PORT_TFD_STS_DRQ	(1L << 3)	/* Data Xfer Req'd */
#define 	AHCI_PORT_TFD_STS_ERR	(1L << 0)	/* Error */
#define 	AHCI_PORT_TFD_STS_INIT	0x7F		/* Initial state */
#define AHCI_PORT_SIG	9		/* Signature */
#define 	ATA_SIG_ATA		0x00000101L	/* ATA interface */
#define 	ATA_SIG_ATAPI		0xEB140101L	/* ATAPI interface */
#define AHCI_PORT_SSTS	10		/* Serial ATA Status */
#define 	AHCI_PORT_SSTS_DET_MASK	0x00000007L	/* Detection Mask */
#define 	AHCI_PORT_SSTS_DET_PHY	0x00000003L	/* PHY Comm Establ */
#define AHCI_PORT_SCTL	11		/* Serial ATA Control */
#define 	AHCI_PORT_SCTL_DET_INIT	0x00000001L	/* Perform Init Seq */
#define 	AHCI_PORT_SCTL_DET_NONE	0x00000000L	/* No Action Req'd */
#define AHCI_PORT_SERR	12		/* Serial ATA Error */
#define 	AHCI_PORT_SERR_DIAG_N	(1L << 16)	/* PhyRdy Change */
#define AHCI_PORT_CI	14		/* Command Issue */

/* Number of Physical Region Descriptors (PRDs). Must be at least NR_IOREQS+2,
 * and at most 1024. There is currently no reason to use more than the minimum.
 */
#define NR_PRDS		(NR_IOREQS + 2)

/* Various size constants. */
#define AHCI_MEM_BASE_SIZE	0x100	/* memory-mapped base region size */
#define AHCI_MEM_PORT_SIZE	0x80	/* memory-mapped port region size */

#define AHCI_ID_SIZE	(256 * sizeof(u16_t))	/* IDENTIFY result size */

#define AHCI_FIS_SIZE	256		/* size of FIS receive buffer */
#define AHCI_CL_SIZE	1024		/* size of command list buffer */
#define AHCI_TMP_SIZE	AHCI_ID_SIZE	/* size of temporary storage buffer */
#define AHCI_TMP_ALIGN	2		/* required alignment for temp buf */
#define AHCI_CT_SIZE	(128 + NR_PRDS * sizeof(u32_t) * 4)
					/* size of command table buffer */
#define AHCI_CT_ALIGN	128		/* required alignment for CT buffer */

#define MAX_PRD_BYTES	(1L << 22)	/* maximum number of bytes per PRD */
#define MAX_TRANSFER	MAX_PRD_BYTES	/* maximum size of a single transfer */

/* Command Table offsets. */
#define AHCI_CT_PACKET_OFF		0x40	/* CT offset to ATAPI packet */
#define AHCI_CT_PRDT_OFF		0x80	/* CT offset to PRD table */

/* Generic FIS layout. */
#define ATA_FIS_TYPE			0	/* FIS Type */
#define 	ATA_FIS_TYPE_H2D	0x27	/* Register - Host to Device */

/* Register - Host to Device FIS layout. */
#define ATA_H2D_SIZE			20	/* byte size of H2D FIS */
#define ATA_H2D_FLAGS			1	/* C and PM Port */
#define 	ATA_H2D_FLAGS_C		0x80	/* update command register */
#define ATA_H2D_CMD			2	/* Command */
#define 	ATA_CMD_READ_DMA_EXT	0x25	/* READ DMA EXT */
#define 	ATA_CMD_WRITE_DMA_EXT	0x35	/* WRITE DMA EXT */
#define 	ATA_CMD_PACKET		0xA0	/* PACKET */
#define 	ATA_CMD_IDENTIFY_PACKET	0xA1	/* IDENTIFY PACKET DEVICE */
#define		ATA_CMD_IDENTIFY	0xEC	/* IDENTIFY DEVICE */
#define ATA_H2D_FEAT			3	/* Features */
#define 	ATA_FEAT_PACKET_DMA	0x01	/* use DMA */
#define 	ATA_FEAT_PACKET_DMADIR	0x03	/* DMA is inbound */
#define ATA_H2D_LBA_LOW			4	/* LBA Low */
#define ATA_H2D_LBA_MID			5	/* LBA Mid */
#define ATA_H2D_LBA_HIGH		6	/* LBA High */
#define ATA_H2D_DEV			7	/* Device */
#define 	ATA_DEV_LBA		0x40	/* use LBA addressing */
#define ATA_H2D_LBA_LOW_EXP		8	/* LBA Low (exp) */
#define ATA_H2D_LBA_MID_EXP		9	/* LBA Mid (exp) */
#define ATA_H2D_LBA_HIGH_EXP		10	/* LBA High (exp) */
#define ATA_H2D_FEAT_EXP		11	/* Features (exp) */
#define ATA_H2D_SEC			12	/* Sector Count */
#define ATA_H2D_SEC_EXP			13	/* Sector Count (exp) */
#define ATA_H2D_CTL			15	/* Control */

/* ATA constants. */
#define ATA_SECTOR_SIZE		512		/* default sector size */
#define ATA_MAX_SECTORS		0x10000		/* max sectors per transfer */

#define ATA_ID_GCAP		0		/* General capabililties */
#define ATA_ID_GCAP_ATAPI_MASK	0xC000		/* ATAPI device mask */
#define ATA_ID_GCAP_ATAPI	0x8000		/* ATAPI device */
#define ATA_ID_GCAP_ATA_MASK	0x8000		/* ATA device mask */
#define ATA_ID_GCAP_ATA		0x0000		/* ATA device */
#define ATA_ID_GCAP_TYPE_MASK	0x1F00		/* ATAPI device type */
#define ATA_ID_GCAP_TYPE_SHIFT	8		/* (one of ATAPI_TYPE_*) */
#define ATA_ID_GCAP_REMOVABLE	0x0080		/* Removable media device */
#define ATA_ID_GCAP_INCOMPLETE	0x0004		/* Incomplete response */
#define ATA_ID_CAP		49		/* Capabilities */
#define ATA_ID_CAP_DMA		0x0100		/* DMA supported (no DMADIR) */
#define ATA_ID_CAP_LBA		0x0200		/* LBA supported */
#define ATA_ID_DMADIR		62		/* DMADIR */
#define ATA_ID_DMADIR_DMADIR	0x8000		/* DMADIR required */
#define ATA_ID_DMADIR_DMA	0x0400		/* DMA supported (DMADIR) */
#define ATA_ID_SUP1		83		/* Features supported (2/3) */
#define ATA_ID_SUP1_VALID_MASK	0xC000		/* Word validity mask */
#define ATA_ID_SUP1_VALID	0x4000		/* Word contents are valid */
#define ATA_ID_SUP1_LBA48	0x0400		/* 48-bit LBA supported */
#define ATA_ID_LBA0		100		/* Max. LBA48 address (LSW) */
#define ATA_ID_LBA1		101		/* Max. LBA48 address */
#define ATA_ID_LBA2		102		/* Max. LBA48 address */
#define ATA_ID_LBA3		103		/* Max. LBA48 address (MSW) */
#define ATA_ID_PLSS		106		/* Phys./logical sector size */
#define ATA_ID_PLSS_VALID_MASK	0xC000		/* Word validity mask */
#define ATA_ID_PLSS_VALID	0x4000		/* Word contents are valid */
#define ATA_ID_PLSS_LLS		0x1000		/* Long logical sectors */
#define ATA_ID_LSS0		118		/* Logical sector size (LSW) */
#define ATA_ID_LSS1		119		/* Logical sector size (MSW) */

/* ATAPI constants. */
#define ATAPI_PACKET_SIZE	16		/* ATAPI packet size */

#define ATAPI_TYPE_CDROM	5		/* CD-ROM device */

#define ATAPI_CMD_TEST_UNIT	0x00		/* Test Unit Ready */
#define ATAPI_CMD_REQUEST_SENSE	0x03		/* Request Sense */
#define 	ATAPI_REQUEST_SENSE_LEN	18		/* result length */
#define 	ATAPI_SENSE_UNIT_ATT	6		/* Unit Attention */
#define ATAPI_CMD_START_STOP	0x1B		/* Start/Stop Unit */
#define 	ATAPI_START_STOP_EJECT	0x02		/* eject the medium */
#define 	ATAPI_START_STOP_LOAD	0x03		/* load the medium */
#define ATAPI_CMD_READ_CAPACITY	0x25		/* Read Capacity */
#define 	ATAPI_READ_CAPACITY_LEN	8		/* result length */
#define ATAPI_CMD_READ		0xA8		/* Read (12) */
#define ATAPI_CMD_WRITE		0xAA		/* Write (12) */

/* Command List constants. */
#define AHCI_CL_ENTRY_SIZE	32		/* Command List header size */
#define AHCI_CL_ENTRY_DWORDS	(AHCI_CL_ENTRY_SIZE / sizeof(u32_t))

#define AHCI_CL_PRDTL_SHIFT	16		/* PRD Table Length */
#define AHCI_CL_PREFETCHABLE	(1L << 7)	/* Prefetchable */
#define AHCI_CL_WRITE		(1L << 6)	/* Write */
#define AHCI_CL_ATAPI		(1L << 5)	/* ATAPI */
#define AHCI_CL_CFL_SHIFT	0		/* Command FIS Length */

/* Command Frame Information Structure (FIS). For internal use only;
 * the contents of this structure are later converted to an actual FIS.
 */
typedef struct {
	u8_t cf_cmd;		/* Command */
	u8_t cf_feat;		/* Features */
	u32_t cf_lba;		/* LBA (24-bit) */
	u8_t cf_dev;		/* Device */
	u32_t cf_lba_exp;	/* LBA (exp) (24-bit) */
	u8_t cf_feat_exp;	/* Features (exp) */
	u8_t cf_sec;		/* Sector Count */
	u8_t cf_sec_exp;	/* Sector Count (exp) */
	u8_t cf_ctl;		/* Control */
} cmd_fis_t;

/* Physical Region Descriptor (PRD). For internal use only;
 * the contents of this structure are later converted to an actual PRD.
 */
typedef struct {
	phys_bytes prd_phys;
	vir_bytes prd_size;
} prd_t;

/* These are from at_wini, as this driver is a drop-in replacement for at_wini.
 * Practically speaking this is already the upper limit with 256 minor device
 * numbers per driver, even though it means we can only ever expose 8 devices
 * out of potentially 32.
 */
#define MAX_DRIVES		8
#define NR_MINORS		(MAX_DRIVES * DEV_PER_DRIVE)
#define SUB_PER_DRIVE		(NR_PARTITIONS * NR_PARTITIONS)
#define NR_SUBDEVS		(MAX_DRIVES * SUB_PER_DRIVE)

/* Port states. */
enum {
	STATE_NO_PORT,		/* this port is not present */
	STATE_SPIN_UP,		/* waiting for device or timeout after reset */
	STATE_NO_DEV,		/* no device has been detected on this port */
	STATE_WAIT_SIG,		/* waiting for device signature to appear */
	STATE_WAIT_ID,		/* waiting for device identification */
	STATE_BAD_DEV,		/* an unusable device has been detected */
	STATE_GOOD_DEV		/* a usable device has been detected */
};

/* Port flags. */
#define FLAG_ATAPI		0x00000001	/* is this an ATAPI device? */
#define FLAG_HAS_MEDIUM		0x00000002	/* is a medium present? */
#define FLAG_USE_DMADIR		0x00000004	/* use ATAPI DMADIR flag? */
#define FLAG_READONLY		0x00000008	/* is the device read-only? */
#define FLAG_BUSY		0x00000010	/* is an operation ongoing? */
#define FLAG_FAILURE		0x00000020	/* did the operation fail? */
#define FLAG_BARRIER		0x00000040	/* no access until unset */

/* Mapping between devices and ports. */
#define NO_PORT		-1	/* this device maps to no port */
#define NO_DEVICE	-1	/* this port maps to no device */

/* Output verbosity levels. */
enum {
	V_NONE,		/* no output at all; keep silent */
	V_ERR,		/* important error information only (the default) */
	V_INFO,		/* general information about the driver and devices */
	V_DEV,		/* device details, to help with detection problems */
	V_REQ		/* detailed information about requests */
};

#endif /* _AHCI_H */