minix/etc/usr/rc
Thomas Cort 039c8db774 readclock.drv: add support for the TPS65950 RTC
On the BeagleBoard-xM, the RTC is located on the Power Management IC
(PMIC). To keep things consistent, access to the PMIC's RTC is done
through the readclock driver. The readclock driver forwards the request
on to the TPS65950 driver which does the work of manipulating the
registers on the chip.

Change-Id: I53cefbb59c5a9ab87fab90df3cc1a75a6e430f58
2013-08-09 12:41:58 +02:00

320 lines
7.3 KiB
Text

# /usr/etc/rc - continued system initialization.
RANDOM_FILE=/usr/adm/random.dat
LOCAL_FILE=/usr/etc/rc.local
ARCH="`sysenv arch`"
if [ ! "$ARCH" ]
then # Older kernels do not provide an arch sysenv variable.
# We assume we are on x86 then, as existing systems with
# kernel and userland (i.e. this script) unsynchronized
# will be x86.
ARCH=i386
fi
# Get $SERVICES_DIRS
. /etc/rc.conf
# Directories to find services in
if [ ! "$SERVICES_DIRS" ]
then SERVICES_DIRS=/usr/sbin
fi
# Booting from cd?
bootcd="`/bin/sysenv bootcd`"
case "$#:$1" in
1:start|1:stop|1:down)
action=$1
;;
*) echo >&2 "Usage: $0 start|stop|down"
exit 1
esac
if [ -f "$LOCAL_FILE" ]
then . "$LOCAL_FILE" $1
fi
disabled()
{
ifs="$IFS"; IFS=,
for skip in `sysenv disable`
do
if [ "$skip" = "$1" ]
then
IFS="$ifs"; unset ifs
return 0
fi
done
IFS="$ifs"; unset ifs
return 1
}
daemonize()
{
# Function to start a daemon, if it exists.
local IFS=':'
local name="$1"
test "$1" = tcpd && name="$2"
for dir in $PATH
do
if [ -f "$dir/$1" ]
then
# check if this service is disabled at the boot monitor.
if disabled $name; then return; fi
echo -n " $name"
"$@" &
return
fi
done
}
up()
{
# Function to dynamically start a system service
opt=""
prefix=$(expr "$1 " : '\(-\)')
if [ "$prefix" = "-" ];
then
opt=$1
shift
fi
service=$1
shift
# First check if this service is disabled at the boot monitor.
if disabled $service; then return; fi
# Service is not disabled. Try to bring it up.
found=""
for dir in $SERVICES_DIRS
do bin=$dir/$service
if [ -x $bin -a -z "$found" ]
then service $opt up $bin "$@"
echo -n " $service"
found=yes
fi
done
if [ -z "$found" ]
then echo " ($service not found in $SERVICES_DIRS)"
fi
}
get_eth_labels() {
# Filter out the non-vlan ethernet entries from inet.conf.
# Produce as output a list of "drivername_instancenr"-formatted labels.
sed 's/\008/ /g' /etc/inet.conf | \
sed -n 's/^ *eth[0-9][0-9]* *\([^ ][^ ]*\) *\([0-9][0-9]*\).*$/\1_\2/p' | \
grep -v '^vlan_'
}
DAEMONS=/etc/rc.daemons
case $action in
start)
# Select console font.
test -f /etc/font && loadfont /etc/font </dev/console
# Cleanup.
rm -rf /tmp/* /usr/run/* /usr/spool/lpd/* /usr/spool/locks/*
# Start servers and drivers set at the boot monitor.
echo -n "Starting services:"
up -n random -dev /dev/random -devstyle STYLE_DEVA -period 3HZ
# load random number generator
if [ -f $RANDOM_FILE ]
then
cat < $RANDOM_FILE >/dev/random
# overwrite $RANDOM_FILE. We don't want to use this data again
dd if=/dev/random of=$RANDOM_FILE bs=1024 count=1 2> /dev/null
fi
# start network driver instances for all configured ethernet devices
for label in $(get_eth_labels); do
driver=$(echo $label | sed 's/\(.*\)_.*/\1/')
instance=$(echo $label | sed 's/.*_//')
eval arg=\$${label}_arg
if [ ! -z "$arg" ]; then arg=" $arg"; fi
arg="-args \"instance=$instance$arg\""
eval up $driver -label $label $arg -period 5HZ
done
if [ X`/bin/sysenv lwip` = Xyes ]
then
up lwip -script /etc/rs.inet -dev /dev/ip -devstyle STYLE_CLONE_A
else
up inet -script /etc/rs.inet -dev /dev/ip -devstyle STYLE_CLONE
fi
up -n ipc
if [ $ARCH = i386 ]
then
up -n printer -dev /dev/lp -period 10HZ
# start VirtualBox time sync driver if the device is there
if grep '^[^ ]* [^ ]* 80EE:CAFE ' /proc/pci >/dev/null; then
up -n vbox -period 10HZ
fi
fi
echo .
# Network initialization.
(: </dev/tcp) 2>/dev/null && net=t # Is there a TCP/IP server?
echo -n "Starting daemons:"
daemonize update
# Ugly error message when starting cron from CD.
# (and cron unnecessary then so..)
if [ ! -f /CD ]
then daemonize cron
else mkdir /tmp/log
rm -f /var/log || true
ln -s /tmp/log /var/log || true
. /etc/rc.cd
fi
# syslogd has not been started yet
rm -f /var/run/syslogd.pid
daemonize syslogd
echo .
# i2c only supported on ARM at the moment
if [ $ARCH = earm ]
then
echo -n "Starting i2c subsystem: "
for bus in 1 2 3
do
test -e /dev/i2c-${bus} || (cd /dev && MAKEDEV i2c-${bus})
up i2c -dev /dev/i2c-${bus} -label i2c.${bus} \
-args instance=${bus}
done
echo .
BOARD_NAME=`eepromread -i | sed -n 's/^BOARD_NAME : \(.*\)$/\1/p'`
case "${BOARD_NAME}" in
A335BONE)
echo "Detected BeagleBone"
echo -n "Starting i2c device drivers: "
test -e /dev/eepromb1s50 || (cd /dev && MAKEDEV eepromb1s50)
up cat24c256 -dev /dev/eepromb1s50 \
-label cat24c256.1.50 \
-args 'bus=1 address=0x50'
# Start TPS65217 driver for power management.
up tps65217 -label tps65217.1.24 \
-args 'bus=1 address=0x24'
;;
A335BNLT)
echo "Detected BeagleBone Black"
echo -n "Starting i2c device drivers: "
test -e /dev/eepromb1s50 || (cd /dev && MAKEDEV eepromb1s50)
up cat24c256 -dev /dev/eepromb1s50 \
-label cat24c256.1.50 -args 'bus=1 address=0x50'
# Start TPS65217 driver for power management.
up tps65217 -label tps65217.1.24 \
-args 'bus=1 address=0x24'
# Start TDA19988 driver for reading EDID.
up tda19988 -label tda19988.1.3470 -args \
'cec_bus=1 cec_address=0x34 hdmi_bus=1 hdmi_address=0x70'
;;
UNKNOWN)
echo "Unable to detect board -- assuming BeagleBoard-xM"
echo -n "Starting i2c device drivers: "
# Start TPS65950 driver for power management.
up tps65950 -label tps65950.1.48 \
-args 'bus=1 address=0x48'
# Set the system time to the time in the TPS65950's RTC
readclock
;;
esac
echo .
fi
if [ "$net" ]
then
if [ -f /etc/rc.net ]
then
# Let a customized TCP/IP initialization script figure it out.
. /etc/rc.net
else
# Standard network daemons.
echo -n "Starting networking:"
if grep -s 'psip0.*default' /etc/inet.conf >/dev/null
then ifconfig -h 10.0.0.1
else
if [ X`/bin/sysenv lwip` = Xyes ]
then
dhcpd --lwip &
echo -n " dhcpd"
else
daemonize dhcpd
fi
fi
daemonize nonamed -L
if [ -f "$DAEMONS" ]
then . "$DAEMONS"
fi
# The last daemon has been started, so close the list:
echo .
fi
fi
if [ "$net" ]
then
# Get the nodename from the DNS and set it.
trap '' 2
intr -t 20 hostaddr -h
trap 2
fi
# Recover files being edited when the system crashed.
test -f /usr/bin/elvprsv && elvprsv /usr/tmp/elv*
# Run the daily cleanup on systems that are not on at night.
test -f /usr/etc/daily && sh /usr/etc/daily boot &
;;
stop|down)
# Save random data, if /usr is mounted rw.
if grep ' \/usr .*rw.*' /etc/mtab >/dev/null
then
if dd if=/dev/random of=$RANDOM_FILE.new bs=1024 count=1 2>/dev/null
then
mv $RANDOM_FILE.new $RANDOM_FILE
else
echo 'Failed to save random data.'
fi
fi
esac
d=
# Let packages run their own scripts
for d in /usr/local/etc/rc.d /usr/pkg/etc/rc.d
do
if [ -d "$d" -a -z "$bootcd" ]
then ( if cd $d
then
echo -n "Local packages ($action): "
for f in *
do
if [ -x "$f" ]
then echo -n "$f "
sh "$f" "$action"
fi
done
echo " done."
fi
)
fi
done