sanchayanmaity/minix
1
0
Fork 0
Code Issues Pull requests Packages Projects Releases Wiki Activity
minix/drivers/fb
History
Thomas Cort 26f14d6b5d fb: auto-configure with EDID 
Use EDID when available to configure the frame buffer driver with
good settings for the attached display.

Change-Id: I69a78155a93e55ffa1ca3ff6621a879a56cdbceb
2013-08-11 20:37:16 +02:00
..
arch/earm fb: auto-configure with EDID 2013-08-11 20:37:16 +02:00
fb.c fb: auto-configure with EDID 2013-08-11 20:37:16 +02:00
fb.h fb: auto-configure with EDID 2013-08-11 20:37:16 +02:00
fb_edid.c fb: auto-configure with EDID 2013-08-11 20:37:16 +02:00
fb_edid.h fb: auto-configure with EDID 2013-08-11 20:37:16 +02:00
logos.h fb: introduce framebuffer support to Minix 2013-02-21 10:29:08 +00:00
Makefile fb: auto-configure with EDID 2013-08-11 20:37:16 +02:00
README.txt fb: auto-configure with EDID 2013-08-11 20:37:16 +02:00

README.txt 

Frame Buffer Driver
===================

Overview
--------

This is the driver for the frame buffer. Currently it only supports the
DM37XX (BeagleBoard-xM).

Testing the Code
----------------

Starting up an instance:

service up /usr/sbin/fb -dev /dev/fb0 -args edid.0=cat24c256.3.50

The arguments take the following form:

	edid.X=L where X is the frame buffer device (usually 0) and L is
	the service label of the service to perform the EDID reading. In
	the example above, it's the EEPROM with slave address 0x50 on
	the 3rd I2C bus. If you want to use the defaults and skip EDID
	reading, you may omit the arguments.