minix/sys/sys/errno.h
David van Moolenbroek b443e9244d Retire EBADIOCTL in favor of ENOTTY
Change-Id: I6bd0e301d21ab7f2336e350e7e6e15d238c2c93d
2014-03-01 09:04:51 +01:00

176 lines
9 KiB
C

/* The <errno.h> header defines the numbers of the various errors that can
* occur during program execution. They are visible to user programs and
* should be small positive integers. However, they are also used within
* MINIX, where they must be negative. For example, the READ system call is
* executed internally by calling do_read(). This function returns either a
* (negative) error number or a (positive) number of bytes actually read.
*
* To solve the problem of having the error numbers be negative inside the
* the system and positive outside, the following mechanism is used. All the
* definitions are are the form:
*
* <define> EPERM (_SIGN 1 )
*
* If the macro _SYSTEM is defined, then _SIGN is set to "-", otherwise it is
* set to "". Thus when compiling the operating system, the macro _SYSTEM
* will be defined, setting EPERM to (- 1), whereas when when this
* file is included in an ordinary user program, EPERM has the value ( 1).
*/
#ifndef _SYS_ERRNO_H_
#define _SYS_ERRNO_H_
/* Now define _SIGN as "" or "-" depending on _SYSTEM. */
#ifdef _SYSTEM
# define _SIGN -
# define OK 0
#else
# define _SIGN
#endif
#define EPERM (_SIGN 1 ) /* operation not permitted */
#define ENOENT (_SIGN 2 ) /* no such file or directory */
#define ESRCH (_SIGN 3 ) /* no such process */
#define EINTR (_SIGN 4 ) /* interrupted function call */
#define EIO (_SIGN 5 ) /* input/output error */
#define ENXIO (_SIGN 6 ) /* no such device or address */
#define E2BIG (_SIGN 7 ) /* arg list too long */
#define ENOEXEC (_SIGN 8 ) /* exec format error */
#define EBADF (_SIGN 9 ) /* bad file descriptor */
#define ECHILD (_SIGN 10 ) /* no child process */
#define EAGAIN (_SIGN 11 ) /* resource temporarily unavailable */
#define ENOMEM (_SIGN 12 ) /* not enough space */
#define EACCES (_SIGN 13 ) /* permission denied */
#define EFAULT (_SIGN 14 ) /* bad address */
#define ENOTBLK (_SIGN 15 ) /* Extension: not a block special file */
#define EBUSY (_SIGN 16 ) /* resource busy */
#define EEXIST (_SIGN 17 ) /* file exists */
#define EXDEV (_SIGN 18 ) /* improper link */
#define ENODEV (_SIGN 19 ) /* no such device */
#define ENOTDIR (_SIGN 20 ) /* not a directory */
#define EISDIR (_SIGN 21 ) /* is a directory */
#define EINVAL (_SIGN 22 ) /* invalid argument */
#define ENFILE (_SIGN 23 ) /* too many open files in system */
#define EMFILE (_SIGN 24 ) /* too many open files */
#define ENOTTY (_SIGN 25 ) /* inappropriate I/O control operation */
#define ETXTBSY (_SIGN 26 ) /* no longer used */
#define EFBIG (_SIGN 27 ) /* file too large */
#define ENOSPC (_SIGN 28 ) /* no space left on device */
#define ESPIPE (_SIGN 29 ) /* invalid seek */
#define EROFS (_SIGN 30 ) /* read-only file system */
#define EMLINK (_SIGN 31 ) /* too many links */
#define EPIPE (_SIGN 32 ) /* broken pipe */
#define EDOM (_SIGN 33 ) /* domain error (from ANSI C std ) */
#define ERANGE (_SIGN 34 ) /* result too large (from ANSI C std ) */
#define EDEADLK (_SIGN 35 ) /* resource deadlock avoided */
#define ENAMETOOLONG (_SIGN 36 ) /* file name too long */
#define ENOLCK (_SIGN 37 ) /* no locks available */
#define ENOSYS (_SIGN 38 ) /* function not implemented */
#define ENOTEMPTY (_SIGN 39 ) /* directory not empty */
#define ELOOP (_SIGN 40 ) /* too many levels of symlinks detected */
#define ERESTART (_SIGN 41 ) /* service restarted */
#define EIDRM (_SIGN 43 ) /* Identifier removed */
#define EILSEQ (_SIGN 44 ) /* illegal byte sequence */
#define ENOMSG (_SIGN 45 ) /* No message of desired type */
#define EOVERFLOW (_SIGN 46 ) /* Value too large to be stored in data type */
/* The following errors relate to networking. */
#define EPACKSIZE (_SIGN 50 ) /* invalid packet size for some protocol */
#define ENOBUFS (_SIGN 51 ) /* not enough buffers left */
#define EBADMODE (_SIGN 53 ) /* badmode in ioctl */
#define EWOULDBLOCK (_SIGN 54 ) /* call would block on nonblocking socket */
#define ENETUNREACH (_SIGN 55 ) /* network unreachable */
#define EHOSTUNREACH (_SIGN 56 ) /* host unreachable */
#define EISCONN (_SIGN 57 ) /* already connected */
#define EADDRINUSE (_SIGN 58 ) /* address in use */
#define ECONNREFUSED (_SIGN 59 ) /* connection refused */
#define ECONNRESET (_SIGN 60 ) /* connection reset */
#define ETIMEDOUT (_SIGN 61 ) /* connection timed out */
#define EURG (_SIGN 62 ) /* urgent data present */
#define ENOURG (_SIGN 63 ) /* no urgent data present */
#define ENOTCONN (_SIGN 64 ) /* no connection (yet or anymore ) */
#define ESHUTDOWN (_SIGN 65 ) /* a write call to a shutdown connection */
#define ENOCONN (_SIGN 66 ) /* no such connection */
#define EAFNOSUPPORT (_SIGN 67 ) /* address family not supported */
#define EPROTONOSUPPORT (_SIGN 68 ) /* protocol not supported by AF */
#define EPROTOTYPE (_SIGN 69 ) /* Protocol wrong type for socket */
#define EINPROGRESS (_SIGN 70 ) /* Operation now in progress */
#define EADDRNOTAVAIL (_SIGN 71 ) /* Can't assign requested address */
#define EALREADY (_SIGN 72 ) /* Connection already in progress */
#define EMSGSIZE (_SIGN 73 ) /* Message too long */
#define ENOTSOCK (_SIGN 74 ) /* Socket operation on non-socket */
#define ENOPROTOOPT (_SIGN 75 ) /* Protocol not available */
#define EOPNOTSUPP (_SIGN 76 ) /* Operation not supported */
#define ENOTSUP ( EOPNOTSUPP ) /* Not supported */
#define ENETDOWN (_SIGN 77 ) /* network is down */
#define EPFNOSUPPORT (_SIGN 78 ) /* Protocol family not supported */
#define EDESTADDRREQ (_SIGN 79 ) /* Destination address required */
#define EHOSTDOWN (_SIGN 80 ) /* Host is down */
#define ENETRESET (_SIGN 81 ) /* Network dropped connection on reset */
#define ESOCKTNOSUPPORT (_SIGN 82 ) /* Socket type not supported */
#define ECONNABORTED (_SIGN 83 ) /* Software caused connection abort */
#define ETOOMANYREFS (_SIGN 84 ) /* Too many references: can't splice */
#define EGENERIC (_SIGN 99 ) /* generic error */
/* The following are not POSIX errors, but they can still happen.
* All of these are generated by the kernel and relate to message passing.
*/
#define ELOCKED (_SIGN 101 ) /* can't send message due to deadlock */
#define EBADCALL (_SIGN 102 ) /* illegal system call number */
#define EBADSRCDST (_SIGN 103 ) /* bad source or destination process */
#define ECALLDENIED (_SIGN 104 ) /* no permission for system call */
#define EDEADSRCDST (_SIGN 105 ) /* source or destination is not alive */
#define ENOTREADY (_SIGN 106 ) /* source or destination is not ready */
#define EBADREQUEST (_SIGN 107 ) /* destination cannot handle request */
#define ETRAPDENIED (_SIGN 110 ) /* IPC trap not allowed */
/* The following errors are NetBSD errors. */
#define EFTYPE (_SIGN 150 ) /* Inappropriate file type or format */
#define EAUTH (_SIGN 151 ) /* Authentication error */
#define ENEEDAUTH (_SIGN 152 ) /* Need authenticator */
/* Realtime option errors */
#define ECANCELED (_SIGN 153 ) /* Operation canceled */
/* Network File System */
#define ESTALE (_SIGN 160 ) /* Stale NFS file handle */
#define EREMOTE (_SIGN 161 ) /* Too many levels of remote in path */
#define EBADRPC (_SIGN 162 ) /* RPC struct is bad */
#define ERPCMISMATCH (_SIGN 163 ) /* RPC version wrong */
#define EPROGUNAVAIL (_SIGN 164 ) /* RPC prog. not avail */
#define EPROGMISMATCH (_SIGN 165 ) /* Program version wrong */
#define EPROCUNAVAIL (_SIGN 166 ) /* Bad procedure for program */
/* Realtime, XSI STREAMS option errors */
#define EBADMSG (_SIGN 170 ) /* Bad or Corrupt message */
/* quotas & mush */
#define EPROCLIM (_SIGN 175 ) /* Too many processes */
#define EUSERS (_SIGN 176 ) /* Too many users */
#define EDQUOT (_SIGN 177 ) /* Disc quota exceeded */
/* Realtime, XSI STREAMS option errors */
#define EMULTIHOP (_SIGN 180 ) /* Multihop attempted */
#define ENOLINK (_SIGN 181 ) /* Link has been severed */
#define EPROTO (_SIGN 182 ) /* Protocol error */
/* File system extended attribute errors */
#define ENOATTR (_SIGN 185 ) /* Attribute not found */
/* XSI STREAMS option errors */
#define ENODATA (_SIGN 190 ) /* No message available */
#define ENOSR (_SIGN 191 ) /* No STREAM resources */
#define ENOSTR (_SIGN 192 ) /* Not a STREAM */
#define ETIME (_SIGN 193 ) /* STREAM ioctl timeout */
#define EDONTREPLY (_SIGN 201 ) /* pseudo-code: don't send a reply */
/* The following are non-POSIX server responses */
#define EBADEPT (_SIGN 301 ) /* specified endpoint is bad */
#define EDEADEPT (_SIGN 302 ) /* specified endpoint is not alive */
#define EBADCPU (_SIGN 303 ) /* requested CPU does not work */
#endif /* !_SYS_ERRNO_H_ */